thermostatic mixing valve for point of use control · specific thermostatic mixing valve for point...
TRANSCRIPT
Thermostatic mixing valve for point of use control
• Specific thermostatic mixing valve for point of use control.
• MINIMIXing provides high security level against scalding and Legionella bacteria.
• Ideal for multi-facility applications: hospitals, nursing homes, hotels, schools, restaurants,laboratories, motorway services… anywhere needing an excellent temperature management,particularly on start up of flow.
2297321
2297323
2297320
2297322
THERMOSTATIC MIXING VALVE MINIMIXing
Purpose:Specific thermostatic mixing valve for point of use control. Designed to supply sinks, hand wash-basins or electronic faucets with immediatetempered water not exceeding a temperature set. MINIMIXing provides high security level against scalding and Legionella bacteria.
Ideal for multi-facility applications : hospitals, nursing homes, hotels, schools,restaurants, laboratories, motorway services … anywhere needing an excellenttemperature management, particularly on start up of flow.
Features and benefits:• extra compact size,• aesthetic design with brass body chrome polished,• easily installed directly on isolating tap under basin or fixed on the wall with a plate provided in the box,• temperature set secured by hexagonal socket screw (Allen key),• easy to replace modular adjustment mechanism (cartridge),• reducing maintenance service cost,• no setting scale : temperature can be set only by installer or operator, not by user,• fitted with 2 approved check valves (KIWA, WRC, DVGW, BELGAQUA, NF…),• outstanding reliability,• compliance with standard EN1111.
Scald protection:High level of protection from scalding: instant failsafe in case of hot or cold water failure.
Protection against legionella:� Cartridge can be removed and replaced (for easier scale removal and disinfecting).
� Integral approved check-valves avoid connection risk between cold and hot water (withstanding temperaturesabove 90°C).
� Thermal shock : simply remove the protective cover and set the temperature with the Allen key to maximum hotposition to allow hot water to circulate (kills bacteria above 60°C).
� The thermostatic mixing valve is delivered with a “rinsing cover kit”: after removed the cartridge and place therinsing cover kit, you can flush the valves with a disinfectant solution or with a water temperature up to 90°Cwithout danger of damaging the thermostatic mechanism.
del
iver
edw
ith
Plate to fix on thewall delivered witheach MINIMIXing
Flat seal Cap Del
iver
ed w
ith
RINSING KIT =Exclusive benefit incase of preventive orcurative treatment
Rinsing kit Cartridge
designation art. number weightReplacement cartridge type: MINCP6 22TCP6 0,23 kg3/8” Swivel nut installation kit 2297390K -Cartridge extractor 22TB120014 -
Ø connection hot water connection cold water connection mixed water art. number weight3/8” Female free nut Male flat sealing Male flat sealing 2297320 0,8 kg1/2” Male flat sealing Male flat sealing Male flat sealing 2297321 0,8 kg3/8” Female free nut Compression fitting 12mm Compression fitting 12mm 2297322 0,8 kg1/2” Compression fitting 15mm Compression fitting 15mm Compression fitting 15mm 2297323 0,8 kg
Accessories and replacement cartridge:
Range:
THERMOSTATIC MIXING VALVE MINIMIXing
Technical features:• Maximum working pressure: 10 bar.• Maximum inlet hot water: 85°C.• Temperature setting range 30 to 70°C.• Factory preset temperature: 38°C.• Flow rate under 3 bar: 28 l/min.• Minimum flow rate: 5 l/min
Flow rates (dynamic pressure at inlets) : Under 1 bar 2 bar 3 barFlow in l/min 14,9 22 28
Body: laiton anti-corrosion DZR CW602N.Cap: ABS.Thermostatic cartridge: ULTEM 1000.Nut: brass CW614N.(All materials are WRC and KTW approved)Approval: KIWA (NL).
Pressure drop curve / headloss
Hot water
Female free nut3/8”
3/8” (12x17) Compression fittings / Female free nutArt. n°.2297322
Mixed water Cold water
Hot water
Female free nut 3/8”
3/8” (12x17) Male flat sealings / Female free nutArt. n°.2297320
Mixed water Cold water
Hot water
Compression fitting 15 mm
1/2” (15x21) Compression fittingsArt. n°.2297323
Mixed water Cold water
Hot water
Flat sealing Male 1/2”
1/2” (15x21) Male flat sealingsArt. n°.2297321
Mixed water Cold water
Flat sealing Male 1/2”
Compression fitting 12 mm
Compression fitting 15 mm
Flat sealing Male 3/8”
Typical installation:
Perpendicular to the wall Parallel to the wall
THERMOSTATIC MIXING VALVE MINIMIXing
Re-
order
no.
69(
40)-
UK
-14/
09
The photographs, illustrations and descriptions contained in this brochure are given for information only. Watts Industries reserves the right to change the technical specifications or the design of these products without prior notice.
WATTS INDUSTRIES France1590 avenue d'Orange CS 10101 SORGUES 84275 VEDENE cedex - FRANCETel. +33 (0)4 90 33 28 28 - Fax +33 (0)4 90 33 28 29/39www.wattsindustries.comE-mail : [email protected]
Hot water supply Cold water supply
Chromed Ty and stainless steel flexible
MINIMIXing
To cold water inlet of the mixerMixed water outlet to mixer hot water
Art. number:
Swivel nut installation kit:
designation art. no.Swivel nut installation kit 2297390K
Minimixing chromed kit:
Complete kit for installation of thermostatic mixing valve MINIMIXing with 2 stop valves and chrome assembly (pipes, tee, nuts and seals).For installation perpendicular or parallel to the wall.Composition:• 1 thermostatic mixing valve MINIMIXing art. no. 2297320,• 2 chromed taps with 2 stainless steel rosettes,• 1 equal tee,• 2 chromed nuts,• 1 chromed copper pipe,• 1 chromed copper pipe bent,• 2 fiber seals.
Installation parallel to the wall Installation perpendicular to the wall
MINIMIXing 3/8”flat sealing
Stop valve 1/2”under washbasin
Chromed equal tee M3/8”
Chromed copper pipes
Ø10x1
Chromed equal tee M3/8”
MINIMIXing 3/8”flat sealing
Stop valve 1/2”under washbasin
Chromed copper pipes
Ø10x1
designation art. no.MINIMIXing chromed kit 2297392K
Art. number: