GLOBAL EXCELLENCE

Thermoplastic Piping Systems

GLOBAL EXCELLENCE

Harris Pye is an innovative global service provider for the marine, offshore oil and gas, and industrial sectors respectively. Harris Pye Engineering has diverse capabilities and specialises in repairs, upgrades and conversions.

Operating on a 24/7 basis, we are confident and reliable in providing high quality assistanceglobally. Our organisation offers complete solutions from design manufacture to installation,in order to meet our clients individual requirements and budgets from our specialistworkshops worldwide.

INTRODUCTION

INNOVATIONOver the decades, the Group has continued to develop a wide variety of services and expertise.The 2014 Group turnover has been confirmed at above £ 100 million all attributed to marineand offshore/onshore oil and gas industries.

GLOBAL EXCELLENCE

GLOBAL STATIONS

From a staff strength of 10 in 1976, we have now established a total of 1000+ employees.

GLOBAL EXCELLENCE

1978 Harris Pye was founded to carry out

seagoing repairs

1991 Harris Pye Singapore established

1993 Branch opened in Middle East

1996 Harris Pye Scandinavia established

1998 Harris Pye Gulf LLC and Middle Eastern

Region established

1999 Offices opened in Malaysia and Japan

2000 Acquires Haven Instrumentation

2001 Harris Pye Brazil is established

COMPANY MILESTONES1978 - Today

2004 Harris Pye Saudi Arabia established

2006 Harris Pye China established

2007 Present management complete MBO

2009 Harris Pye Australia established

2012 Harris Pye Fabrication Llandow

established

2013 Harris Pye DMCC Dubai established

2014 Harris Pye Brazil expansion and

investment

2015 Harris Pye India established

GLOBAL EXCELLENCE

INTEGRATED MANAGEMENT SYSTEM

PERFORMANCE QUALITY ENVIRONMENTAL SAFETY

• Efficient customer service

• Providing top quality service, repair, upgrade, conversions

• The Group is authorized by ISO standards and is API accredited

• EN 1090 – 1 EXC 2• Credibility• Integrity• API certified• Fully approved LRQA to

current ISO 9001 for all project repair requirements

• ASME accreditation for ‘R’, ‘U’ and ‘S’ stamp which allows us to design, repair and build pressure vessels

• ISO 14001• Management internal

recycling programmes• Environmentally friendly

materials are used wherever possible, from marine coatings to stationery

• Green technology: the supply, installation and maintenance of environmentally friendly systems and equipment

• BS OHSAS 18001• Full liability cover• Full risk analysis• Strict permit to

work system• Drop surveys• Safety inductions• Fire and

evacuation drills

GLOBAL EXCELLENCE

EXHAUST EMISSIONS SCRUBBING SYSTEMSWe are installing Exhaust Gas Purification Systems (EGPS) on a number of vessels for a prominent cruise company using PE100 material (sizes d25 – d600), techniques include butt fusion and electrofusion.

Harris Pye Engineering has the proven ability to install complex piping systems on vessels in service, (and indocking), thus maintaining the customers revenue stream. We use the latest technology and techniques in buttfusion and electrofusion welding for PE100 piping systems with diameters up to DN600 .

• Close co-operation between HPE and GF design departments in Europe, Gulf and India• Harris Pye personnel trained by GF in buttfusion and electrofusion techniques• Harris Pye trained instructors in GF PE100 installation• CNC 630 Butt fusion Machines for Field Installation• MSA Electrofusion machines• Topload tooling for branch saddle installation

GLOBAL EXCELLENCE

Piping System Design

As part of the installation survey, Harris Pye offers high definition 3D laser scanning to gather large amounts of fielddata with accuracies of +/- 1mm. The scans are individually referenced to a coordinate system using an ultra-highprecision industrial survey method and a 3D calculating proprietary software known as Point Cloud.

Upon completion of the survey the 'sphere' of data will be integrated with AutoCAD for a full 3D representation ofexisting structure & components enabling modification and renewal within the proposed areas, ensuring a clashfree design in our own Design office

3D Scanning

GLOBAL EXCELLENCE

REPLACE SALT WATER SANITARY LINES• Replacement of all salt water pipework from low level to level 4 in living quarter (LQ) areas including

risers from machinery spaces• The installation included new pipework using Instaflex fusion welded plastic pipe and fittings

throughout. To allow uninterrupted service of systems new pipe work is run alongside the existingpiping, until final commissioning of wet units at each deck level, with old piping decommissioned oncompletion then removed and scrapped out

• Isolation valves included and installed at every “dropper” to wet units sinks etc for local isolations• Isolation Valves on both Port and Starboard at each level to enable isolation of the system• A60 bulkhead penetrations using Roxtec PPS/S• Temporary hoses employed during the installation as we understand the need for 24 /7 usage

GLOBAL EXCELLENCE

Scope of Work• Harris Pye Engineering (HPE) replaced hot and cold potable water risers in the GF instaflex pipe. New valves are

fitted at the end of each line for isolation purposes. For all required bulk head or deck head penetrations, roxtecsleev-it penetration and RSPP/S back to back seals were fitted.

• HPE replaced the existing manifold with GF plastic constructed manifold, and all lines of the manifold for all risers.New GF valves replaced all butterfly valves. The construction of manifolds were completed by HP Fabrication in theUnited Kingdom and fitted in sections on-board.

• A number of 4” hoses were run through the bulkhead into the laundry; using the laundry chute to feed all deckswith hot and cold potable water. Jumper hoses and pressure reduction valves were supplied by the client. HPEworked in tandem with ship supplied designated personnell for the duration of the refit.

AURORAHot and Cold Water Riser & Manifold Replacement

GLOBAL EXCELLENCE

Scope of WorkHarris Pye installed new GF pipework for the hot, cold & sanitary watersystem on-board the Adonia during a recent refit. The water systems werekept operational with the use of jumper hoses that connected pre-installedtees and valves on Port & Starboard sides of DK 4, DK 6 and DK 7. The hotand cold potable water system were replaced within in the strict deadlinepresented for the refit.

ADONIAPOTABLE WATER PIPING SYSTEM REPLACEMENT

Scope of WorkHarris Pye worked on-board tied-into the newly replaced riser systems.The skilled riding crew installed the standard tie-ins and any special tie-insrequired. 3D modelling of piping is prepared and isometrics drawings ofthe installed pipework have been produced for the client.

AZURAHOT RISER ENGINE ROOM PENETRATIONS

Scope of work Harris Pye’s riding crew completed the renewal of hot and cold risers overa duration of 60 days sail using GF’s Instaflex piping system.

QUEEN MARY 2HOT AND COLD WATER LINES

GLOBAL EXCELLENCE

Thank you …