thermodynamic data a tutorial course session 4: modelling of data for solutions (part 4) alan...
TRANSCRIPT
![Page 1: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/1.jpg)
Thermodynamic dataA tutorial course
Session 4: Modelling of data for solutions (part 4)
Alan Dinsdale“Thermochemistry of Materials” SRC
![Page 2: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/2.jpg)
2
What happens when things mix ?
• Some elements mix together (eg in the liquid phase) without giving out or absorbing heat – said to mix ideally eg Co and Ni
• Normally there is a net heat effect which could be either negative (giving out heat) or positive (heat is absorbed) … or even more complex
![Page 3: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/3.jpg)
Ideal solutions
• Mixing between metals or compounds having a similar size
• Same number of nearest neighbours• No enthalpy change associated with the
mixing• No volume change on mixing• Assume that the metals or compounds mix
together randomly
![Page 4: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/4.jpg)
Entropy of mixing for random solution
• From the Boltzmann relationship
– k is the Boltzmann constant– is the number of ways of arranging the system
• For a mole of material ie with atoms, of A atoms and of B atoms
• Using Stirling’s approximation
• The contribution to the Gibbs energy from ideal mixing is therefore
![Page 5: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/5.jpg)
Gibbs energy associated with ideal mixing
5
Note that there could still be an offset in the Gibbs energy for each component associated with a change in the reference state for the Gibbs energy
![Page 6: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/6.jpg)
Regular solutions
• Ideal solutions are rare• Most solutions show either positive or negative
enthalpies of mixing• Deviation from ideality is called excess Gibbs energy • Simplest model to represent non-ideality is the “so-
called” regular solution model• Components again approximately the same size, same
number of nearest neighbours and no change in volume on mixing
• Assumes enthalpy effect is from short range interaction between pairs of atoms
• The interaction has no effect on the order within the solution ie random mixing is maintained
![Page 7: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/7.jpg)
• Total lattice energy given by
• where , and are the number of A-A, A-B and BB bonds respectively
• The probability of finding two chosen adjacent sites occupied by two A atoms, two B atoms or one atom and one B atom will be , and respectively
• If there are nearest neighbours, the total number of bonds will be
• The number of bonds of each type will be the total number of bonds multiplied by its probability ie.
, and
![Page 8: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/8.jpg)
• This leads to:
• The change in energy on mixing will be this quantity minus the lattice energies for the two elements
• Or, since
![Page 9: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/9.jpg)
More complicated descriptions• In practice few solution phases are regular
– a more complicated description is required• Redlich – Kister expression
• This is the one used most often• Others
The parameters here can be equated to the partial enthalpies
• All these descriptions are numerically identical and it is possible to convert one for to another
![Page 10: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/10.jpg)
Gibbs energy of binary solutions
G = xFe GFe + xCu GCu
+ R T [ xFe ln(xFe) + xCu ln(xCu)]
+ xCu xFe [ a + b (xCu-xFe) + c (xCu-xFe)2
+ d (xCu-xFe)3 + …..]
Pure component Gibbs energies
Ideal contribution to Gibbs energy
Excess Gibbs energy – in this case “Redlich-Kister expression”
where a, b, c, d …. could be temperature dependent(in practice for Fe-Cu we may need only one or possibly two parameters)
10
![Page 11: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/11.jpg)
Overall Gibbs energy of mixing
11
![Page 12: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/12.jpg)
In practice the variation of the enthalpy of mixing can be complex
![Page 13: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/13.jpg)
regular solution negative enthalpy of mixing
Positive enthalpy of mixing
![Page 14: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/14.jpg)
14
Entropy of mixing• Generally two contributions
– First from random mixing of the elements (ideal contribution)
– “So called” excess entropy of mixing - really to account for deviations from ideality
![Page 15: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/15.jpg)
15
Gibbs energy of mixing eg G = H – T S
![Page 16: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/16.jpg)
Variation of Gibbs energy of phases at fixed temperature
Difference in Gibbs energy between fcc and liquid Fe
Difference in Gibbs energy between fcc and bcc Cu
Change in Gibbs energy with composition is complex
fcc phase is reference for both elements
16
![Page 17: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/17.jpg)
17
Calculation of binary phase equilibria
![Page 18: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/18.jpg)
18
.... over a range of temperatures
![Page 19: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/19.jpg)
19
![Page 20: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/20.jpg)
Magnetics
• In the second session we discussed the magnetic contribution to thermodynamic properties
• Where • T* the critical temperature
– TC, the Curie temperature for ferromagnetic materials
– TN, the Neel temperature for antiferromagnetic materials
• B0 is the average magnetic moment per atom
![Page 21: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/21.jpg)
Variation of magnetic contribution with composition
• Usual approach is to represent the variation of and with composition using a Redlich-Kister series
and
![Page 22: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/22.jpg)
• They can vary in a quite complicated way
In this the magnetic effect causes a miscibility gap between two fcc phases – a so-called “Nishizawa” horn
![Page 23: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/23.jpg)
Binary systems – Cu-Ni
![Page 24: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/24.jpg)
Mixing ferromagnetic and antiferromagnetic materials
• Model assumes that the Néel temperature for antiferromagnetic materials is equivalent to a negative Curie temperature eg: bcc Fe-Mn
![Page 25: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/25.jpg)
• For fcc phases the situation is more complex eg fcc Mn-Ni. Here it is necessary to divide the critical temperature by 3 in the antiferromagnetic region
![Page 26: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/26.jpg)
Intermetallic phases
• In intermetallic phases elements or species occupy may different sublattices
• The common terminology is distinguish the different sublattices by separating them with a colon
• eg. Silicon Carbide could be designated as(Si):(C)
• In this particular case there are the same number of sites on each sublattice
• Often the number of sites is different• eg. Cementite (Fe)3:(C) has three sites for the
metallic atoms and one for the carbon
![Page 27: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/27.jpg)
• Stoichiometric phases: variation of Gibbs energy with T similar to that for phases of elements
• Many important compound phases are stable over ranges of homogeneity. Crystal structure indicates sublattices with preferred occupancy.– eg: sigma, mu, gamma brass
• Use compound energy formalism to allow mixing on different sites– Laves phases: (Cu,Mg)2 (Cu,Mg)1
– Interstitial solution of carbon: (Cr,Fe)1 (C,Va)1
– Spinels: (Fe2+,Fe3+)1 (Fe2+,Fe3+)2 (O2-)4
27
![Page 28: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/28.jpg)
Gibbs energy using compound energy formalism eg (Cu,Mg)2 (Cu,Mg)1
• Gibbs energy again has 3 contributions• Pure compounds with element from each sublattice
Cu:Cu, Cu:Mg, Mg:Cu, Mg:Mg• Ideal mixing of elements on each sublattice
• Cu and Mg on first and on second sublattices
• Non-ideal interaction between the elements on each sublattice but with a specific element on the other sublattice
– Cu,Mg:Cu Cu,Mg:Mg Cu:Cu,Mg Mg:Cu,Mg
28
![Page 29: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/29.jpg)
• The expression for the Gibbs energy then becomes:
![Page 30: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/30.jpg)
• etc can be represented using the Redlich Kister series
• , , and are the site fraction of the elements on each sublattice
![Page 31: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/31.jpg)
Peritectic system – Sb-Sn
![Page 32: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/32.jpg)
Peritectic system – Cu-Zn
![Page 33: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/33.jpg)
From binary to multicomponent• Multicomponent Gibbs energy given by
33
Kohler Muggianu Toop
G = Σ xi Gi + R T Σ xi ln(xi) + Gexcess
Various models used to extrapolate excess Gibbs energy into ternary and higher order systems from data for binary systems. Extra ternary terms used if required
![Page 34: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/34.jpg)
Calculation of phase diagrams
![Page 35: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/35.jpg)
35
Phase Diagram Calculations
Experimental dataG(T,P,x) Model for each phase
Develop parameters for SMALL systems to reproduce experimental data
DatabaseIndustrial problem
Predictions for
LARGE systems
Problem solved
MTDATAor similar
Validation
![Page 36: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/36.jpg)
36
3D liquidus surfaces
![Page 37: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/37.jpg)
37
Early MTDATA 3D from NPL in the late 1940s
MTDATA 3D
![Page 38: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/38.jpg)
Ag-Au-Pd
Tem
pera
ture
/øC
x(Au)
960
970
980
990
1000
1010
1020
1030
1040
1050
1060
1070
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
x(Au)
Te
mp
era
ture
/°C
Ag Au
LIQUID
FCC_A1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1960
970
980
990
1000
1010
1020
1030
1040
1050
1060
1070
Tem
pera
ture
/øC
x(Pd)
1000
1100
1200
1300
1400
1500
1600
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
x(Pd)
Te
mp
era
ture
/°C
Au Pd
LIQUID
FCC_A1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 11000
1100
1200
1300
1400
1500
1600
Tem
pera
ture
/øC
x(Ag)
0
200
400
600
800
1000
1200
1400
1600
1800
2000
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
x(Ag)
Te
mp
era
ture
/°C
Pd Ag
LIQUID
FCC_A1
FCC_A1+FCC_A1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 10
200
400
600
800
1000
1200
1400
1600
1800
2000
x(A
u)
x(Pd)
0.0
0.2
0.3
0.5
0.7
0.9
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 10
0.2
0.4
0.6
0.8
1
x(Pd)
x(A
u)
Ag
Au
Pd
1000 1100 1200 1300 1400 1500
x(A
u)
x(Pd)
0.0
0.2
0.3
0.5
0.7
0.9
0.0 0.2 0.4 0.6 0.8 1.00 0.2 0.4 0.6 0.8 10
0.2
0.4
0.6
0.8
1
x(Pd)
x(A
u)
T = 1400°C
Ag
Au
Pd
LIQUID
FCC_A1
x(A
u)x(Pd)
0.0
0.2
0.3
0.5
0.7
0.9
0.0 0.2 0.4 0.6 0.8 1.00 0.2 0.4 0.6 0.8 10
0.2
0.4
0.6
0.8
1
x(Pd)
x(A
u)
T = 1200°C
Ag
Au
Pd
FCC_A1
LIQUID
![Page 39: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/39.jpg)
Models of ternary phase diagrams
![Page 40: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/40.jpg)
Critical assessment of data
![Page 41: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/41.jpg)
41
What do we mean by critical assessment ?
• Enthalpies of mixing of liquid Cu-Fe alloys
• Large scatter in experimental values
• Which data best represent reality ?
• .. and are these data consistent
• with …
![Page 42: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/42.jpg)
…. with the experimental phase diagram
42
![Page 43: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/43.jpg)
43
Published phase
diagrams may be wrong
![Page 44: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/44.jpg)
44
…… and measured activity data
![Page 45: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/45.jpg)
45
What is the aim of a critical assessment ?
• Aim of critical assessment process is to generate a set of reliable data or diagrams which are self consistent and represent all the available experimental data for the system
• It involves a critical analysis of the experimental data (Hultgren, Massalski etc)
• ….. followed by a computer based optimisation process to reduce the experimental data into a small number of model parameters
• ….. using rigorous theoretical basis underlying thermodynamics
![Page 46: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/46.jpg)
46
How
• Experimental data: Search and analysis– Search through standard compilations eg Hultgren, Massalski– Use a database of references to the literature eg Cheynet– Carry out a full literature search
• Which properties– Phase diagram information
• Liquidus / solidus temperatures• Solubilities
– Thermodynamic information • enthalpies of mixing• vapour pressure data• emf data• heat capacities• Enthalpies of transformation
![Page 47: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/47.jpg)
47
How to carry out an assessment : obtaining model parameters
• Aim is to determine set of coefficients which gives best agreement with experimental data – by least-squares fitting of the thermodynamic functions to
selected set of experimental data
• It is usually carried out with the assistance of a computer– Using optimisation software
• MTDATA optimisation module• PARROT (inside ThermoCalc)• LUKAS program BINGSS• CHEMOPT
![Page 48: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/48.jpg)
Calculated Fe-Cu phase diagram
48
![Page 49: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/49.jpg)
49
Calculated Fe-Cu phase diagram
![Page 50: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/50.jpg)
50
Calculated enthalpies of mixing for liquid Fe-Cu alloys
![Page 51: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/51.jpg)
51
Calculated activities for Fe-Cu liquid alloys
![Page 52: Thermodynamic data A tutorial course Session 4: Modelling of data for solutions (part 4) Alan Dinsdale “Thermochemistry of Materials” SRC](https://reader037.vdocuments.mx/reader037/viewer/2022110101/56649ed85503460f94be6744/html5/thumbnails/52.jpg)
Next session
• Thermodynamic models for other sorts of phases– Chemical ordering– Reciprocal systems– Spinels, Halite– Liquids with short range ordering
• Oxides, slags, mattes• Molten salts