thermally broken steel windows

SL30-ISO® - 30mm thin-framed insulated steel profile system for doors, windows and facades

SL3O-ISO®

MORE LIGHT!

The smallest window profile in the world....

10862 Shawnee Road Harrington, DE 19962 | www.doverwindows.com | 843-285-7905 phone

7

ContemporaryMinimalistModernBeautiful!

Beauty at its finest!

The thinness of the Sl30-ISO® profile allows windows and doors to become almost two-dimensional like a painting. They bring to mind the works of Mondriaan, frank Lloyd Wright and Mies van de Rohe, but now with a comfortable interior climate!

While these systems can have an industrial aesthetic, they can also be used in more traditional environments. In fact, these steel-framed glazing systems can enrich any environment, whether modern, minimalist or traditional, depending on the use of colour, geometry and division lines – a designer’s dream.

Bringing the outside world inside

Strong and durable, steel profiles allow for the creation of ultra-thin and yet highly stable windows. Steel framing can be made to be very light and thin by combining the inherent strength of steel with smart design. Thanks to these unique properties, architects can enjoy the freedom to incorporate large areas of glazing into their designs.

The very thin 30 mm sightline of the SL30-ISO® profile integrates perfectly into the design of a building: being almost invisible, it allows huge amounts of light to flood in, enhancing the connection between the inside and outside world.

6

9

ThinStrongLarge surfaces

Thin and strong insulated profile system for steel windows, doors and facades.

SL30-ISO®

Villa Bussum - The Netherlands

SL30-ISO®, thin-framed steel thermo-insulated window profiles.colour: black - RAL 9005glass top panels and side panels with high insulation values23 m2 <> 6,3 m high <> 5,9 m widesteel entrance door with hardwood panelling

Example: An SL30-ISO® profile shown on the same scale as an aluminium curtain wall profile.

Standard profile depth Ix65 mm 20,80 cm4

70 mm 26,26 cm4

80 mm 38,30 cm4

100 mm 69,00 cm4

120 mm 109,50 cm4

An SL30-ISO® profile of 80mm has a bending resistance that is almost identical to that of an aluminium curtain wall profile with a total depth of 150 mm and a profile width of 50 mm.

As the elastic bending modulus of steel is 3 times higher than that of aluminium, the linear moment of inertia of a steel profile can be 3 times smaller while still achieving the same bending resistance.

SL30-ISO® profile:Ix=38,30cm4

3O mm sightlineAn important feature of this profile system is the minimal amount of framing needed to achieve structural integrity. The SL30-ISO® profile also has a sightline of 30 mm for mullions and transoms, which makes it the thinnest profile system on the market today.

for a tilt-and-turn window with fixed glass panels around, the sightline is only 50 mm.

High strength The standard SL30-ISO® profile is very thin with a narrow depth and yet extremely strong. Its bending resistance values are very high in comparison with other common profile systems.

Large glazed surfacesThe profile’s high resistance means large dimensioned window panels can be installed. In many situations, fixed glazed panels can achieve a height of 3.0 m depending on wind loads and glass specification.

Strength comparison

8

9

ThinStrongLarge surfaces

Thin and strong insulated profile system for steel windows, doors and facades.

SL30-ISO®

Villa Bussum - The Netherlands

SL30-ISO®, thin-framed steel thermo-insulated window profiles.colour: black - RAL 9005glass top panels and side panels with high insulation values23 m2 <> 6,3 m high <> 5,9 m widesteel entrance door with hardwood panelling

Example: An SL30-ISO® profile shown on the same scale as an aluminium curtain wall profile.

Standard profile depth Ix65 mm 20,80 cm4

70 mm 26,26 cm4

80 mm 38,30 cm4

100 mm 69,00 cm4

120 mm 109,50 cm4

An SL30-ISO® profile of 80mm has a bending resistance that is almost identical to that of an aluminium curtain wall profile with a total depth of 150 mm and a profile width of 50 mm.


SL30-ISO® profile:Ix=38,30cm4

3O mm sightlineAn important feature of this profile system is the minimal amount of framing needed to achieve structural integrity. The SL30-ISO® profile also has a sightline of 30 mm for mullions and transoms, which makes it the thinnest profile system on the market today.

for a tilt-and-turn window with fixed glass panels around, the sightline is only 50 mm.

High strength The standard SL30-ISO® profile is very thin with a narrow depth and yet extremely strong. Its bending resistance values are very high in comparison with other common profile systems.

Large glazed surfacesThe profile’s high resistance means large dimensioned window panels can be installed. In many situations, fixed glazed panels can achieve a height of 3.0 m depending on wind loads and glass specification.

Strength comparison

8

3-3/

16”

1-3/16”

11

Thin+Strong+Large surfaces+

SL30-ISO-PLUS®

Example: An SL30-ISO-PLUS® profile shown on the same scale as an aluminium curtain wall profile with the same bending resistance.

Profile depth Ix100 mm 64 cm4

By comparison, an SL30-ISO-PLUS® profile with a depth of 100 mm has a bending resistance identical to that of a reinforced aluminium curtain wall profile with a total depth of 150 mm and a profile width of 50 mm.


SL30-ISO-PLUS® profileIx=64cm4

Aluninium curtain wall profileIncluding reinforcementIx=64cm4

Strength comparison

The SL30-ISO-PLUS® system combines the thin sightline and high resistance of the SL30-ISO® profile with even better insulation values thanks to the use of triple glazing.

Profile depth: Ix:100 mm 68 cm4

120 mm 108 cm4

These are extremely high values compared with other common profile systems and can be achieved with relatively small profile depths.

10

The SL30-ISO-PLUS® insulated profile system for steel windows, doors and facades.

11

Thin+Strong+Large surfaces+

SL30-ISO-PLUS®

Example: An SL30-ISO-PLUS® profile shown on the same scale as an aluminium curtain wall profile with the same bending resistance.

Profile depth Ix100 mm 64 cm4

By comparison, an SL30-ISO-PLUS® profile with a depth of 100 mm has a bending resistance identical to that of a reinforced aluminium curtain wall profile with a total depth of 150 mm and a profile width of 50 mm.


SL30-ISO-PLUS® profileIx=64cm4

Aluninium curtain wall profileIncluding reinforcementIx=64cm4

Strength comparison

The SL30-ISO-PLUS® system combines the thin sightline and high resistance of the SL30-ISO® profile with even better insulation values thanks to the use of triple glazing.

Profile depth: Ix:100 mm 68 cm4

120 mm 108 cm4

These are extremely high values compared with other common profile systems and can be achieved with relatively small profile depths.

10

The SL30-ISO-PLUS® insulated profile system for steel windows, doors and facades.

1-3/16”

3-15

/16”

13

SL30-ISO®

Thermal Insulation

The thermal insulation of a window or door is calculated in accordance with EN 10077-1 and 10077-2.

The total thermal insulation of a window or door is determined by the insulation value for the profile and the insulated glass unit.

This is calculated using the following formula: U-window = %gl * Ugl + %fr * Ufr + Lg * ψgl

U-window (Uw) insulation value for a complete window or door %gl : surface area of the glazed section expressed as

a percentage of the total surface area Ugl : insulation value of the glass %fr : surface area of the profile expressed as a

percentage of the total surface area Ufr : insulation value of the profile Lg : total circumference of the glass/total surface

area ψgl : indication of the heat loss from the edge seal of the insulated glass unit

The SL30-ISO® windows achieves its low insulation values thanks to the high performance thermal separation between the internal and external profiles as well as its narrow sight line.

CE The values given on these pages for thermal insulation were calculated in accordance with current European Standards, EN-ISO 10077-1 and EN-ISO 10077-2.

Ufr - The SL30-ISO-PLUS® thermal insulation profile systemThe SL30-ISO® profile series achieves the following thermal insulation values:

SL30-ISO-PLUS® fixed glazing: Ufr = 1.9 W/m2K (EN 10077-2)

SL30-ISO-PLUS® tilt-and-turn window: Ufr = 1.5 W/m2K (EN 10077-2)

When comparing these values with other profile systems, please note that Ufr is expressed in Watts/m2. In general SL30-ISO® profile is 50% slimmer in comparison with common systems. This means SL30-ISO® windows insulate far better than a system with the same Ufr but with a broader sightline.

Ugl - Thermal insulation of glass

SL30-ISO®

Insulated glass with one cavity can be produced with an insulation value of Ugl = 1.0 W/m2. The insulation value for the glass edge seal (ψgl value) is also very important. Synthetic glass support spacers and synthetic spacer bars are becoming increasingly popular and help provide superb insulation values.

Ufr - The SL30-ISO® Thermal insulation profile systemThe SL30-ISO® profile series provides the following thermal insulation values:

SL30-ISO® fixed glazing: Ufr = 2.6 W/m2K (EN 10077-2)

SL30-ISO® tilt-and-turn window: Ufr = 3.0 W/m2K (EN 10077-2)

SL30-ISO® SL30-ISO-PLUS®Wind and water tightnessThe SL30-ISO® steel window system is able to conceal a fully integrated water drainage system within the profiles thanks to the system’s superior sealing components. This results in a high level of wind and water tightness without any visible holes or rain caps.

> 600 Pa for fixed parts and wings; class 8A of EN12208 > 450 Pa for doors; class 7A of EN 12208.

Edge sealing of insulated glass unitsStandard triple or double insulated glass units cannot be used in the SL30-ISO® profile system without the side seal of the insulated glass unit often becoming visible (a standard edge seal is often larger than the support for the glass behind the flange plus the height of the rubber).

In cooperation with our glass suppliers, a solution to this problem was found in which not only makes the edge seal smaller, but also reduces the dimensional tolerance in the glass dimensions has also been reduced. In the most extreme cases, when all tolerances are “negative” for the visibility of the edge seal, the visibility of the edge seal is limited to a maximum of 2 mm, which is masked by the glazing sealant.

InsulationWellnessComfort

Ugl - Thermal insulation of glass

SL30-ISO-PLUS®

SL30-ISO-PLUS® is specially designed for triple glazed units. These glass panels have two cavities and can achieve the extremely low insulation value of Ugl = 0.5 W/m2.

Insulation Values SL30-ISO®

(all values in W/m2K) Ugl Uglψgl 0.039 1.1 1.0

Fixed glazing (mm) 1230 x 1480 Uw 1.30 1.21

5000 x 2500 Uw 1.25 1.16

Tilt & turn window (mm) 1230 x 1480 Uw 1.45 1.36 Turn window (mm)1230 x 1480 Uw 1.44 1.35

Insulation Values SL30-ISO-PLUS®

Ugl Ugl Ugl 0.9 0.7 0.5

1.07 0.88 0.70

1.03 0.83 0.64

(to be introduced in 2015)

1.20 1.00 0.80

- - -

12

An insulated profile system that offers outstanding performance

15

Producer: MHB bvSupplier: ......................................................................................

Type:Steel profile system MHB SL30-ISO® and SL30-ISO-PLUS®

with invisible water drainage

Wind and Water tightness: - 600 Pa for fixed parts and wings; class 9A of EN12208. - 450 Pa for doors; class 8A of EN 12208

Material: steel (powder coated) or stainless steel (brushed).

Dimensions: See technical drawings p.32 to 57

Partitioning: we can provide client-specific partitioning of the window/door unit. See technical drawings

Profile type:SL30-ISO® profile, built-in depth 80 mm (see details on p.9)SL30-ISO-PLUS® profile, built-in depth 100 mm (see details on p.11)

Surface treatment:1. abrasive blasting2. 3 layer powder-coating (first layer is zinc-rich epoxy)The overall layer thickness is 150-180 microns in keeping with Dutch VMRG standards.

Colour: standard RAL colour, other colours on request

Glazing: SL30-ISO®

Double insulated glass unit (as requested by the designer) fixed using a choice of different 12 mm high metal glazing beads (see sections 1a,1b, 1c on p.17). Glazing is sealed using an MHB sealant, with the exception of the aluminium glazing beads, which have an EPDM gasket on the interior side. SL30-ISO-PLUS®

Triple insulated glass unit (as desired by the designer) fixed using a choice of 3 different 12 mm high metal glazing beads (see sections 1a,1b, 1c p.17). Glazing is sealed using an MHB sealant, with the exception of the aluminium glazing beads, which have an EPDM gasket on the interior side.

Weather seals: continuous EPDM rubber profile in frame

Hinges, locks and handles: - Side-hung windows are made with lift-off hinges and window handles

(optional: lockable). - Tilt-and-turn windows are made using the MHB tilt-and-turn system

with window handles (optional: lockable).- Doors are made with lift-off hinges, MHB multi-point lock and MHB

door handles. The passive door leaf of the double door is equipped with 1 or 2 flush bolts.

Technical Specifications

Applications

The patented SL30-ISO® system allows for the following configurations:

Maximum dimensions fixed parts: up to 3 m high (and higher in some cases) side-hung windows and doors: maximum height 2.5 m1

(3.0 m1 is possible under special conditions) tilt-and-turn windows: maximum width of 1000 mm, maximum height of 1500 mm

Glass thickness With the standard SL30-ISO® system, the thickness of the insulated glass unit is limited to 40 mm. This increases to up to 55 mm for the SL30-ISO-PLUS® system.

However, as MHB produces the profiles as well, for special orders we are able to accommodate glass units of almost any thickness.

Note: the insulated glass unit in a tilt-and-turn window can have a maximum thickness of 30 mm.

Moveable parts inward turning: - door - tilt-and-turn window - side-hung or bottom-hung window outward turning: - door - side-hung or top-hung window.

Please contact MHB if you would like to order items for applications other than those mentioned here. We are happy to further develop the SL30-ISO® system to suit your requirements.

Note: SL30-ISO® is still under development and new applications are being added all the time.

SL30-ISO®

Window technical details p.42/4314 15











Glazing: SL30-ISO®









Applications










SL30-ISO®

Window technical details p.42/4314

15











Glazing: SL30-ISO®









Applications










SL30-ISO®

Window technical details p.42/4314

17

SL30-ISO®

Glazing beads

Fixed parts, doors and windows

Metal glazing beads 1.a. Steel box shaped glazing bead

The box-shaped glazing beads are invisibly clipped onto steel buttons to create a smooth finish.The profiles are powder coated using the same finish as the window profiles and positioned within the rebate.

1.b. Steel L-shaped glazing bead with visible fixings

The L-shaped steel glazing beads help create a minimalist design. The L-shaped profiles are very slim, blend into the profile width and are fixed with visible matching countersunk screws. These glazing beads are powder coated using the same finish as the window profiles.

1.c. Aluminium L-shaped glazing bead with no visible fixings

By the end of 2014, MHB will have a L-shaped glazing bead system available that does not require any visible fixing screws. The aluminium glazing beads will be clipped onto fixing points in recess. Apart from the aesthetic value, this system will also be easier to install. Contact MHB for information on availability.

SL30 ISO® window and door systems come with standard hardware but can also be fitted with bespoke hardware. In general, most doors and tilt-and-turn windows can be equipped with standard available hardware. Turning windows are usually equipped with bespoke hardware.

for special designs we are happy to engineer a customised solution.

Putty seal

2.a. Putty seal, fully sealed on the exterior side

The fully sealed version requires taking special care when installing the glass, observing specific instructions. This version is used in case the glazing is done from the exterior side.

2.b. Putty seal, ventilated cavity

This is similar to a putty seal but also has a ventilated cavity around the glass, integrated water drainage and invisible drain holes.

In order to imitate windows from the past, SL30 ISO® windows allow for the use of putty glazing solutions. This sealing adhesive is used to fix glass panes into windows and doors. Putty is highly elastic and is specially developed to be long lasting as well as to match the colour of the profiles. It is very easy to coat this sealant by paintbrush with paint, which is especially useful as a long-term solution.

16

17

SL30-ISO®

Glazing beads


Metal glazing beads 1.a. Steel box shaped glazing bead

The box-shaped glazing beads are invisibly clipped onto steel buttons to create a smooth finish.The profiles are powder coated using the same finish as the window profiles and positioned within the rebate.

1.b. Steel L-shaped glazing bead with visible fixings

The L-shaped steel glazing beads help create a minimalist design. The L-shaped profiles are very slim, blend into the profile width and are fixed with visible matching countersunk screws. These glazing beads are powder coated using the same finish as the window profiles.

1.c. Aluminium L-shaped glazing bead with no visible fixings

By the end of 2014, MHB will have a L-shaped glazing bead system available that does not require any visible fixing screws. The aluminium glazing beads will be clipped onto fixing points in recess. Apart from the aesthetic value, this system will also be easier to install. Contact MHB for information on availability.



Putty seal

2.a. Putty seal, fully sealed on the exterior side

The fully sealed version requires taking special care when installing the glass, observing specific instructions. This version is used in case the glazing is done from the exterior side.

2.b. Putty seal, ventilated cavity

This is similar to a putty seal but also has a ventilated cavity around the glass, integrated water drainage and invisible drain holes.

In order to imitate windows from the past, SL30 ISO® windows allow for the use of putty glazing solutions. This sealing adhesive is used to fix glass panes into windows and doors. Putty is highly elastic and is specially developed to be long lasting as well as to match the colour of the profiles. It is very easy to coat this sealant by paintbrush with paint, which is especially useful as a long-term solution.

16

1-3/16”

1-3/16”

1-3/16”

19



Divided light

There are 3 ways to divide glass elements into smaller units, which is usually done for aesthetic reasons.

3.a. Divided light system 1 ‘truly divided’

The traditional way of dividing window units is by using separate fields within a single element. In this case each element contains several glass panes.

3.b. Divided light system 2, ‘apparent divided’

A more practical solution for dividing window units is to place profiles on top of both sides of the glass. The appearance is on both sides IDENTICAL to the ‘true division’ system because of the way the insulated glass unit is built up using a divided spacer bar configuration. This solution has the advantage of lower costs, stronger elements and better insulation.

3.c. Divided light system 3, ‘EL tray system’

Only 20 mm sightlines!

A truly unique ‘look’ for SL30-ISO® windows can be achieved using the ‘EL tray system’ of dividing window elements. This creates an extremely slim appearance with carefully engineered and applied flat muntins on both sides. In this solution there are real muntins on both sides.

SL30-ISO®

“Divided lights”


3.a. interior view 3.a. exterior view

3.b. interior view 3.b. exterior view

3.c. interior view 3.c. exterior view

3.a.

3.b.

3.c.

18

3/4” 2-3/16”2-3/16”

2-3/16”

2-3/16”

2-3/16”

2-3/16”

1-3/16”

1-3/16”

1-3/16”

1-3/16”

3/4”

19



Divided light

There are 3 ways to divide glass elements into smaller units, which is usually done for aesthetic reasons.

3.a. Divided light system 1 ‘truly divided’

The traditional way of dividing window units is by using separate fields within a single element. In this case each element contains several glass panes.

3.b. Divided light system 2, ‘apparent divided’

A more practical solution for dividing window units is to place profiles on top of both sides of the glass. The appearance is on both sides IDENTICAL to the ‘true division’ system because of the way the insulated glass unit is built up using a divided spacer bar configuration. This solution has the advantage of lower costs, stronger elements and better insulation.

3.c. Divided light system 3, ‘EL tray system’

Only 20 mm sightlines!

A truly unique ‘look’ for SL30-ISO® windows can be achieved using the ‘EL tray system’ of dividing window elements. This creates an extremely slim appearance with carefully engineered and applied flat muntins on both sides. In this solution there are real muntins on both sides.

SL30-ISO®

“Divided lights”


3.a. interior view 3.a. exterior view

3.b. interior view 3.b. exterior view

3.c. interior view 3.c. exterior view

3.a.

3.b.

3.c.

18

21


SL30-ISO®

Surface treatment & Hardware fittings

5. Stainless steel hinges

Our slim and elegant stainless steel hinges are powder coated using the same finish as the window and door profiles.All MHB doors and windows are individually assembled by craftsmen. Every operable element is fitted exactly into its unique frame, allowing us to easily weld the hinges onto the elements, making them both discrete and solid and ready for a very long life.

Hinges

Surface treatment

4. Surface treatment and powder coating

When designed and produced well, steel windows have an extremely long life expectancy, which means that the type of surface treatment is crucial. All MHB windows and doors are powder coated in our factory. Powder coating is the best available method of preserving steel. The surface and colour treatment consists of abrasive blasting and 3 layers of powder coating, in which first layer is zinc-rich epoxy. The overall layer thickness is 180 microns in accordance with Dutch standards. Powder coating colours are standard RAL colours, but special colours are also possible, depending on availability and compatibility.

Photo

20

23



Door handles for lock case and floating lock case

Doors

SL30-ISO®

Matching accessories

6.a. L-shaped stainless steel door handle - DHL.01

DHL.01 stainless steel handle (length: 128 mm, diameter: 19 mm) on oval stainless steel escutcheon (30 x 71 x 13 mm).

6.b. L-shaped stainless steel door handle – DHL.02

DHL.02 stainless steel handle (length: 128 mm, diameter: 19 mm) on round stainless steel escutcheon (diameter: 58 mm, depth: 8.5 mm). Invisible screws on the outside for enhanced security.

6.c. Stainless steel rounded door handle – DHR.01

DHR.01 stainless steel handle (length: 128 mm, diameter: 19 mm) on round stainless steel escutcheon (30 x 71 x 13 mm). Invisible screws on the outside for enhanced security.

6.d. Door handle knob – DHK.01

DHK.01 round, Ø 50 mm, brushed stainless steel, mat, on round stainless steel escutcheon (diameter: 58 mm, depth: 8.5mm).

Cranked door handles for lock mullion

7.a. Cranked rectangular door handle – DHR.C.01

DHR-C.01 rectangular chromed cranked door handle (diameter: 19 mm) on oval escutcheon (max. width: 30 mm). Invisible screws on the outside for enhanced security.

7.b. L-shaped cranked door handle – DHL.C.02

DHL-C.02 rectangular chromed cranked handle (diameter: 19 mm) on oval escutcheon (max. width: 30 mm). Invisible screws on the outside for enhanced security. Burglar-proof.

7.c. Cranked door knob – DHK.C02

DHK.01 round, Ø 50 mm, brushed stainless steel, matte, on oval stainless steel escutcheon (30 x 71 x 13 mm).

22

Chec

k w

ww

.mhb

.eu

for

the

late

st h

ardw

are

solu

tions

....

lock

mul

lion

lock

cas

eflo

atin

g lo

ck c

ase

floating lock caselock case

lock mullion

25



High security locking systems

Doors

SL30-ISO®

Door hardware

8. Door Lock Standard Security - DLS.01

DLS.01 is a multipoint door lock that has been specifically designed to maximise the security performance of doors. European security standards EN 1627 –1630.

Door accessories

9.a. Oval stainless steel cylinder escutcheon – DAC.01

DAC.01 oval stainless steel cylinder escutcheon (30 x 71 x 13 mm). Matching handles (sections 6 & 7). Burglar-proof.

9.b. Round stainless steel cylinder escutcheon – DAC.02

DAC.02 round stainless steel cylinder escutcheon (thickness: 13 mm). Matching handles (sections 6 & 7). Burglar-proof.

10. Latch bolt system for locking passive door leaf – DAC.03

DAC.03 supporting latch.Body made from extruded aluminium, anodised or painted. Locking pivot in stainless steel.

24

Chec

k w

ww

.mhb

.eu

for

the

late

st h

ardw

are

solu

tions

....

27

SL30-ISO® window and door systems go along with standard hardware but also often bespoke hardware.

In general doors and tilt-and-turn windows can be equipped with standard available hardware. Turning windows are usually equiped with bespoke hardware.

for special projects we are pleased to engineer a customised solution.

MHB Window handles

11. Rounded stainless steel window handle - WHR.01 *

MHB WHR.01 rounded stainless steel window handle (diameter: 16 mm) on rectangle stainless steel escutcheon (depth: 13 mm).

12. Wave-shaped stainless steel window handle - WHW.01 *

MHB WHW.01 wave-shaped stainless steel handle (length: 122 mm, width: 14 mm) on rectangle stainless steel escutcheon. (depth: 13 mm)

13.a. Rectangular shaped window handles – WHL.01

MHB WHL.01 rectangular stainless steel handle (length: 122 mm, width: 14 mm) on rectangular stainless steel escutcheon (depth: 13 mm).

13.b. Lockable rectangular shaped handles – WHL.01.L

MHB WHL.01.L rectangular shaped stainless steel handle (length: 122 mm, width: 14 mm) on rectangle stainless steel escutcheon (depth: 13 mm).

Integrated locking system with key.

* No locking systems available for these handles.

SL30-ISO®

Hardware fittings

Windows

26

Chec

k w

ww

.mhb

.eu

for

the

late

st h

ardw

are

solu

tions

....

29




MHB Locking and closing systems

14. MHB Multipoint window lock – WML.01

Any number of locking points can be applied.

Outward turning:Single turning windows Double turning windowsTop-hung windows

Inward turning:Single turning windowsDouble turning windowsBottom-hung windows

15.a. MHB T-shaped window handle – WMH.01

WMH.01 T-shaped handle on stainless steel locking mechanism. Comes in brass, bronze, chrome and stainless steel finishes or in the colour of the powder coating applied to the frame. Also available in a lockable version. finish escutcheon: stainless or in the colour of the powder coating applied to the window frame (in combination with MHB Multipoint locking system).

15.b. MHB oval-shaped window handle – WMH.02

WMH.02 Oval-shaped handle on stainless steel locking mechanism. Comes in brass, bronze, chrome, stainless steel finishes or in the colour of the powder coating applied to the frame. Also available in a lockable version. finish escutcheon: stainless steel or in the colour of the powder coating applied to the window frame (in combination with MHB Multipoint locking system).

SL30-ISO®

Hardware fittings

Windows

MHB custom-made bronze handle for the United Nations windows in Geneva, Switzerland.

28

Chro

me

polis

hed

base

pla

teSt

ainl

ess

stee

l bru

shed

bas

e pl

ate

Chec

k w

ww

.mhb

.eu

for

the

late

st h

ardw

are

solu

tions

....

31




Tilt-and-Turn window handles

16. Tilt-and-Turn window handle – WHTT

The WHTT range of high quality stainless steel or chrome handles can be adapted to fit window style and width. Some are also available in a lockable version. They can be installed on round, oval or a rectangular escutcheons, depending on the window configuration.

Standard window accessories

17. Peg stay – WAC.01

Beautifully crafted stainless steel or chrome handles that ensure smooth opening and secure fixation. Available in the same style as the handles in section 16.

18. Folding opener – WAC.02

The WAC.02 folding opener offers a robust and functional solution for turn window operation.

19. Friction stay – WAC.03

WAC.03 friction stay

20. Spring catch – WAC.04

WAC.04.

SL30-ISO®

hardware fittings

Windows

WHTT.02Ø19mm

WHTT.03Ø21mm

WHTT.04Ø21mm

WHTT.01Ø19mm

WHTT.05Ø19mm

30

Chec

k w

ww

.mhb

.eu

for

the

late

st h

ardw

are

solu

tions

....

33

SL30-ISO®

Technical informationElevations

Technical information Details

Fixed glazed wall

Maximum dimensions width x height in mm: 4500 x 3000

32

177” x 118”

33

SL30-ISO®



Fixed glazed wall


32

3-3/16”

3-3/16”

1-3/16”

1-3/16”

1-3/16”

1-3/16”1-3/16”

35

SL30-ISO®

Inward turning single window

Technical informationElevations & Details

Inward turning double window

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7

Maximum dimensions width x height in mm: 1000 x 27001100 x 23001200 x 2000

Minimal dimensions width x height in mm: 220 x 200

34

39” x 106”43” x 91”47” x 79”

9” x 8”

35

SL30-ISO®

Inward turning single window


Inward turning double window

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



34

2-3/16”

2-3/16”

2-3/16”

2-3/16”

2-3/16”

2-3/16”

2-3/16” 2-3/16”

2-9/16” 2-9/16”

37

SL30-ISO®



Inward turning single door with lock mullion

Inward turning double door with lock mullion

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7

Maximum dimensions width x height in mmper door: 1000 x 27001100 x 23001200 x 2000

Minimal dimensions width x height in mmper wing: 300 x 1200

36

39” x 106”43” x 91”47” x 79”

12” x 47”

37

SL30-ISO®



Inward turning single door with lock mullion

Inward turning double door with lock mullion

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



36

2-3/16”

4-1/2” 4-1/2”

4-1/2”

39

SL30-ISO®


Inward turning single door with lock case

Inward turning double door with lock case

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



38

39” x 106”43” x 91”47” x 79”

12” x 47”

39

SL30-ISO®


Inward turning single door with lock case

Inward turning double door with lock case

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



38

2-9/16”

2-9/16”2-9/16”

2-9/16”

2-9/16”

2-9/16”

41

SL30-ISO®


Inward turning single door with floating lock case

Inward turning double door with floating lock case

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



40

39” x 106”43” x 91”47” x 79”

12” x 47”

41

SL30-ISO®


Inward turning single door with floating lock case

Inward turning double door with floating lock case

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 32

to 4

7



40

2-9/16”

2-9/16” 2-9/16”

2-9/16”

2-9/16”

2-9/16”

43

SL30-ISO®



Inward turning single bottom hung window

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47



42

9” x 8”

80” x 39”

43

SL30-ISO®



Inward turning single bottom hung window

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47



42

2-3/16”

2-3/16”

2-3/16” 2-3/16”2-9/16”

2-3/16”

2-3/16”

2-3/8”

45

SL30-ISO®



Tilt-and-turn window without glazing beads

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47

Maximum dimensions width x height in mm: 1000 x 1500(Max. weight per window = 100kg)


44

17” x 17”

40” x 59”

45

SL30-ISO®



Tilt-and-turn window without glazing beads

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47



44

2” 2” 2”2-3/4”

2”

2”

2”

2”2-3/8” 2-3/8”

47

SL30-ISO®



Tilt-and-turn window with glazing beads

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47



46

17” x 17”

40” x 59”

47

SL30-ISO®



Tilt-and-turn window with glazing beads

Othe

r de

tails

for

inw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to

be fo

und

from

pag

e 32

to

47



46

2-3/8” 2-3/8” 2-3/8”3-9/16”

2-3/8”

2-3/8”

2-3/8”

2-3/8”

49

SL30-ISO®



Outward turning top hung window

Othe

r de

tails

for

out

war

dly

turn

ing

win

dow

s or

doo

rs t

o be

fou

nd fro

m p

age

48 t

o 57


Minimal dimensions width x height in mm:220 x 200

48

9” x 8”

79” x 39”

49

SL30-ISO®



Outward turning top hung window

Othe

r de

tails

for

out

war

dly

turn

ing

win

dow

s or

doo

rs t

o be

fou

nd fro

m p

age

48 t

o 57


Minimal dimensions width x height in mm:220 x 200

48

2-1/2”

1-5/8” 1-5/8”

1-5/8” 2-1/8” 2-1/8”

1-5/8”

51

SL30-ISO®



Outward turning single window

Outward turning double window

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



50

39” x 106”43” x 91”47” x 79”

9” x 8”

51

SL30-ISO®



Outward turning single window

Outward turning double window

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



50

1-5/8”

1-5/8”

1-5/8”

1-5/8” 1-5/8”

2-1/2”2-1/2”

1-5/8”

1-5/8”

2-1/8”

2-1/8”

53

Outward turning single door with lock mullion

SL30-ISO®



Outward turning double door with lock mullion

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7


Minimal dimensions width x height in mmper wing:300 x 1200

52

39” x 106”43” x 91”47” x 79”

12” x 48”

53

Outward turning single door with lock mullion

SL30-ISO®



Outward turning double door with lock mullion

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



52

4”

4” 4”

1-5/8”

55

Outward turning single door with lock case

SL30-ISO®


Outward turning double door with lock case

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



54

39” x 106”43” x 91”47” x 79”

12” x 48”

55

Outward turning single door with lock case

SL30-ISO®


Outward turning double door with lock case

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



54

2-1/8” 2-1/8”

2-1/8”

2-1/8”

2-1/8”

2-1/8”

57

SL30-ISO®


Outward turning single door with floating lock case

Outward turning double door with floating lock case

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



56

39” x 106”43” x 91”47” x 79”

12” x 48”

57

SL30-ISO®


Outward turning single door with floating lock case

Outward turning double door with floating lock case

Othe

r de

tails

for

outw

ardl

y tu

rnin

g w

indo

ws

or d

oors

to b

e fo

und

from

pag

e 48

to 5

7



56

2-1/8”

2-1/8”

2-1/8”

2-1/8”

2-1/8”

2-1/8”

59

SL30-ISO®

Wind and water tightness performance

Wind and water tightness in everyday use:

The optimum conditions under which our products are manufactured with a view to official testing are not always matching the conditions when products are made in larger production runs at our factory, or when the products are installed in a building. We therefore need to be realistic and clear with our customers that the results obtained in official tests are not necessarily the same as what can be expected in everyday use.

MHB therefore guarantees the following level of performance based on CE-certification:

Fixed windows 9A (600PA) Class 4

Windows- turning outward 8A (450PA) Class 4

- tilt-and-turn window 9A (turning inward) (600PA) Class 4

Doors- turning outward 8A Class 4 (450PA)

- turning inward 8A (450PA) Class 4

Official wind and water tightness tests:

MHB products obtained the following results in wind and water tests performed by CE-accredited testing laboratories.

Fixed windows E1200 (1200PA) Class 4

Windows- turning outward E1200 (1200PA) Class 4

- tilt-and-turn window 9A (turning inward) (600PA) Class 4

Doors- turning outward 8A Class 4 (450PA)

- turning inward E750 (750PA) Class 4

Wat

er r

esis

tanc

eEN

1027

and

EN1

2208

Win

d re

sist

ance

(EN1

026

and

EN12

207)

Wat

er r

esis

tanc

eEN

1027

and

EN1

2208

Win

d re

sist

ance

(EN1

026

and

EN12

207)

All MHB windows and doors come with an official CE-certificate.

This means all our products have been tested by an officially accredited certification agency.

Burglar Resistance:

All MHB windows and doors can be delivered with CE-certification for burglar resistance. These products have been tested by an officially accredited certification agency. These SL30-ISO® windows and doors provide certified burglar resistance at class 2 level according to EN 1627 and NEN5096+C1 2007.

Certificate

CE-Certificate SL30-ISO

According to DIN-EN-14351-1

WINDOWS OPENING OUTSIDE

MHB bvOnderstalstraat 36674 ME HerveldThe Netherlands

Reaction to fire:

External fire performance:

Water tightness - uncovered (A):

Resistance to wind load — Test pressure:

Resistance to wind load — Frame deflection:

Air permeability:

Acoustic performance:

ITT test executed by:Notified Body SKG NB0960

n.p.d.

n.p.d.

Class 8A (450 Pa)

Class 3

Class B

Class 3

n.p.d.

Certificate



DOOR OPENING INSIDE AND OUTSIDE


Reaction to fire:


Water tightness - uncovered (A):



Air permeability:



n.p.d.

n.p.d.

Class 8A (450 Pa)

Class 3

Class B

Class 3

n.p.d.

Certificate



WINDOW TILT AND TURN



Reaction to fire:

Water tightness:



Air permeability:



n.p.d.

n.p.d.

Class 9A (600 Pa)

Class 3

Class C

Class 4

n.p.d.

58

thermally broken steel windows

Documents

steel windows

sl30iso profile

steel profiles

steel framing

steelframed glazing

inherent strength of

smallest window profile

stable windows