theboltofchoicefortheheavyequipmentindustrywanderlodgegurus.com/database/theory/infascobolt.pdfhighest...

A10-AREVISED FEBRUARY, 2009

© Copyright 2009. All rights reserved.No portion may be copied or reproduced in any manner.

The Bolt of Choice for the Heavy Equipment IndustryInfasco is the largest manufacturer of Grade 5and Grade 8 Cap Screws in North America.They are accepted and used by all branchesof the Federal Government as well as GM,Ford, GE, Westinghouse, General Dynamicsand many other national and international

companies.

With Infasco Cap Screws, our customerswill be in full compliance

with the new “Fastener Quality Act”(Public Law 101-592).

INFASCO CAP SCREWSINFASCO CAP SCREWS

Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products

UU..SS.. GGOOVVEERRNNMMEENNTTAAPPPPRROOVVEEDD

Grade 8 Infasco Fastener Grade 5 Infasco Fastener

Highest quality at a fair price - All certified Higher price without any increase in quality.bolts must meet the same industry standards.

Infasco is Original Equipment for many well Private heads are never used as originalknown manufacturers, such as: Caterpillar and equipment.

Infasco’s triangle trade mark is easily identi- Private headed bolts mask the identity of thefiable and traceable. Their bolts are widely maker. Not only can the manufacturer change accepted by government and industry. from one year to the next, but bolts could

even be made overseas without your knowledge.

Infasco is a certified member of the Private headed bolts must always be fullyAmerican Association for Laboratory tested and certified. But, if you don’t have aAccreditation. testing laboratory, then what do you do?

You have the assurance of correct and Protect yourself - Do not rely on impressiveconsistent testing methods. looking unscientific tests performed in your

shop. Insist on Standardized procedures whichmeet accepted requirements.

A10-BREVISED FEBRUARY, 2009


Some nut and bolt distributors have fasteners made with their own privatehead markings. This is costly to them and to their customers. But, do youget anything more even though you are paying more?

INFASCO PRIVATE HEADFASTENERS FASTENERS

INFASCO FASTENERS VS. INFASCO FASTENERS VS. PRIVATE BRAND FASTENERSPRIVATE BRAND FASTENERS


PRIVATE HEADFASTENER

INFASCO FASTENERS VS.PRIVATE BRAND FASTENERS

Higher price without any increase in quality.

Private heads are never used as originalequipment.

Private headed bolts mask the identity of themaker. Not only can the manufacturer changefrom one year to the next, but bolts could evenbe made overseas without your knowledge.

Private headed bolts must always be fullytested and certified. But, if you don't have atesting laboratoty, then what do you do?

Protect yourself - Do not rely on impressivelooking unscientific tests performed in your shop.Insist on Standardized procedures which meetaccepted requirements.

Highest quality at a fair price - All certifiedbolts must meet the same industry standards.

Infasco is Original Equipment for many wellknown manufacturers, such as: Caterpillar andMack Truck.

Infasco's triangle trade mark is easily identi-fiable and traceable. Their bolts are widelyaccepted by government and industry.

Infasco is a certified member of theAmerican Association for Laboratory Accred-itation.

You have the assurance of correct andconsistent testing methods.

INFASCOFASTENERS


PRIVATE HEADFASTENER

INFASCO FASTENERS VS.PRIVATE BRAND FASTENERS

Higher price without any increase in quality.

Private heads are never used as originalequipment.

Private headed bolts mask the identity of themaker. Not only can the manufacturer changefrom one year to the next, but bolts could evenbe made overseas without your knowledge.

Private headed bolts must always be fullytested and certified. But, if you don't have atesting laboratoty, then what do you do?

Protect yourself - Do not rely on impressivelooking unscientific tests performed in your shop.Insist on Standardized procedures which meetaccepted requirements.

Highest quality at a fair price - All certifiedbolts must meet the same industry standards.

Infasco is Original Equipment for many wellknown manufacturers, such as: Caterpillar andMack Truck.

Infasco's triangle trade mark is easily identi-fiable and traceable. Their bolts are widelyaccepted by government and industry.

Infasco is a certified member of theAmerican Association for Laboratory Accred-itation.

You have the assurance of correct andconsistent testing methods.

INFASCOFASTENERS

?

A10-CREVISED FEBRUARY, 2009


Our Grade-8 Fastening System

With Our Grade 8 Fastening System

YOU GET...

� QUALITY ASSURANCE� SAFETY� RELIABILITY� DEPENDABILITY

All Our Grade-8 Fasteners are Manufacturedin North America by the Biggest Manufacturer of

Standard Fasteners in the World.

With Our Grade 8 Fastening System

YOU AVOID...

� DOWN TIME� INCREASED COSTS� POTENTIAL LIABILITY� COUNTERFEITHARDWARE

is Your Solution to Counterfeit Bolts

Be Smart, Be Safe. Choose The Best.The Top Quality, Safe and Reliable Grade-8 Fastening System.

A10-DREVISED FEBRUARY, 2009


Grade-8 Fastening System

In todayʼs hi-tech, competitive world,equipment has more power, speed and

sophistication than ever before.Thatʼs why

YOU NEED...Our Dependable Grade-8 Fasteners.

Since the current business environment requiresan even better bottom line, you must take into

account TOTAL COST, not just price.Thatʼs why

YOU NEED...Our Fastening System. Our Grade-8 Fasteners

Reduce Downtime and OverallMaintenance Costs.Everyone is becoming aware of the problem of

imported counterfeit bolts.Thatʼs why

YOU NEED...Us, The fastener supplier you can rely on

for original equipment quality.Because of increasing liability problems today,sound business practice demands that safety

becomes a top priority.Thatʼs why

YOU NEED...

is Your Solution to these problems.

Our Grade-8 Fastening System.

HHAARRDDWWAARREE

A10-1REVISED OCTOBER, 2004


HEX HEAD CAP SCREWS

THREADS PER INCH

TECHNICAL DATA

HEX HEAD MARKING AISI, ASTM MATERIAL PHYSICAL PROPERTIESMARKING SPECIFICATION OR SAE No. TYPE

AND GRADE FOR PROOF LOAD TENSILE ROCKWELLFASTENER DIA. (PSI) STRENGTH HARDNESS

INCHES (MIN. PSI)

No Marking C-1010 Low Carbon 1/4 thru 1-1/2 33,000 60,000 B-100 max.GRADE 1 C-1020 Steel

No Marking C-1018 Low Carbon 1/4 thru 3/4 55,000 74,000 B-100 max.GRADE 2 C-1020 Steel 7/8 thru 1-1/2 33,000 60,000

3 Radial Lines C-1038 Medium 1/4 thru 1 85,000 120,000 C25-34GRADE 5 Carbon Steel over 1 to 1-1/2 74,000 105,000 C19-30

Quenched &Tempered

(Heat Treated)

6 Radial Lines 8735 Medium Up to 1-1/2 120,000 150,000 C33-39GRADE 8 8740 Carbon Alloy

Steel, Quenched& Tempered

9 Radial Lines SPECIAL Special Carbon Up to 1 145,000 180,000 C38-42Exceeds Gr.-8 Alloy Steel to ExceedsSpecifications Quenched & 200,000 GRADE 8Ultra Alloy Tempered

TENSILE STRENGTH MATERIAL HEAD PLATING ILLUSTRATION

180,000 PSI Special carbon 23% higher Yellow zincAlloy steel Head for Plating providesFor maximum Greater EffectiveStrength Wrenching Resistance to

Corrosion

150,000 PSI Medium Standard Yellow zincCarbon alloy Plating provides

Steel EffectiveResistance toCorrosion

120,000 PSI Medium Standard LusterplatedCarbon To resist rustSteel And corrosion

DIAMETER 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1USS 20 18 16 14 13 12 11 10 9 8SAE 28 24 24 20 20 18 18 16 14 14

The formula for determining basic thread length on cap screws is as follows:a. For bolts or screws 6 in. and shorter - twice the diameter plus 1/4 inch.b. For bolts or screws over 6 inches long - twice the diameter plus 1/2 inch.c. When bolts or screws are too short to apply the formula the thread will be extended as close to thehead as possible.

USScoarse

SAEfine

HHAARRDDWWAARREE



POPULAR FASTENER ASSORTMENTS

COARSE (USS) & FINE (SAE)GRADE 5 HARDWARE ASSORTMENT2464 pieces72 itemswith bin label set and (2) #12021 bins

Part No. 501072LHalf quantities available, use 501072M

� The most popular sizes of USS (coarse) and SAE(fine) cap screws, nuts, flat washers and lockwashers 1/4” through 1/2” diameters.

1/4x 1/2

5/16x

1-1/2

3/8x

2-1/2

1/2x

2-1/2

5/16SAE flatwasher

1/2lockwasher

1/4x 3/4

5/16x 2

3/8x 3

1/2x 3

3/8SAE flatwasher

1/4x 1

5/16x

2-1/2

7/16x

1-1/2

1/4USShex nut

7/16SAE flatwasher

1/4x

1-1/2

3/8x 1/2

7/16x 2

5/16USShex nut

1/2SAE flatwasher

1/4x 2

3/8x 3/4

7/16x

2-1/2

3/8USShex nut

1/4lockwasher

1/4x

2-1/2

3/8x 1

7/16x 3

7/16USShex nut

5/16lockwasher

5/16x 1/2

3/8x

1-1/2

1/2x

1-1/2

1/2USShex nut

3/8lockwasher

5/16x 1

3/8x 2

1/2x 2

1/4SAE flatwasher

7/16lockwasher

1/4x 1/2

1/4x 3/4

1/4x 1

1/4x

1-1/2

1/4x 2

1/4x

2-1/2

5/16x 1/2

5/16x 1

5/16x

1-1/2

5/16x 2

5/16x

2-1/2

3/8x 1/2

3/8x 3/4

3/8x 1

3/8x

1-1/2

3/8x 2

3/8x

2-1/2

3/8x 3

7/16x

1-1/2

7/16x 2

7/16x

2-1/2

7/16x 3

1/2x

1-1/2

1/2x 2

1/2x

2-1/2

1/2x 3

1/4SAEhex nut

5/16SAEhex nut

3/8SAEhex nut

7/16SAEhex nut

1/2SAEhex nut

SAE FINE

USS COARSE

� 80 compartment combination cabinetTwo 40 bin cabinets; 35” wide x 21” high x 12” deep

� Grade 5 cap screws are manufacturedfrom 1038 carbon steel for a minimumtensile strength of 120,000 PSI.

This assortment also available in Grade L9 and 8

GRADE L9 COARSE (USS) & FINE (SAE )ASSORTMENT1475 pieces72 itemsIncludes bin labels and(2) #12021 bins

Part No. 601087* Contains sizes shown above, with one exception. GradeL9 assortments are supplied with USS flat washers.

GRADE 8 COARSE (USS) & FINE (SAE )ASSORTMENT1475 pieces72 itemsIncludes bin labels and(2) #12021 bins

Part No. 501087* Contains sizes shown in chart above.

HHAARRDDWWAARREE

A10-2AREVISED OCTOBER, 2004



COARSE (USS)GRADE 5 HARDWAREASSORTMENT1308 pieces96 itemswith bin label set and bins

Part No. 501704

COARSE (USS)GRADE 8 HARDWARE ASSORTMENT1308 pieces96 itemswith bin label set and bins

Part No. 501705

� The most popular sizes of USS (coarse) capscrews, nuts, flat washers and lock washers 1/4”through 1” diameters. 1/2” to 6” in length.

� Includes:(2) #12021, 40 compartment bins and (1) #12068, 32 compartment bin

SMALL & LARGE DIAMETER Coarse Thread

Assortment Photo for illustration purposes only.Actual Contents may avry.

HHAARRDDWWAARREE

A10-2BREVISED OCTOBER, 2004



COARSE (USS)GRADE 5 HARDWARE ASSORTMENT1296 pieces77 itemswith bin label set and (2) #12021 bins

Part No. 501098

� The most popular sizes of USS (coarse) capscrews, nuts, flat washers and lock washers 1/4”through 3/4” diameters. 1/2” to 4” in length.

� Includes 80 compartment combination cabinetTwo 40 bin cabinets; 35” wide x 21” high x 12” deep

� Grade 5 cap screws are manufacturedfrom 1038 carbon steel for a minimumtensile strength of 120,000 PSI.


GRADE L9 COARSE (USS) ASSORTMENT1296 pieces77 itemsIncludes bin labels and(2) #12021 bins


GRADE 8 COARSE (USS) ASSORTMENT1296 pieces77 itemsIncludes bin labels and(2) #12021 bins



1/4hex nut

1/4lockwasher

1/4flat

washer

1/4x 1/2

1/4x 3/4

1/4x 1

5/16hex nut

5/16lockwasher

5/16flat

washer

5/16x 1/2

5/16x 3/4

3/8hex nut

3/8lockwasher

3/8flat

washer

3/8x 1

3/8x

1-1/2

7/16hex nut

7/16lockwasher

7/16flat

washer

7/16x 1

7/16x

1-1/2

1/2hex nut

1/2lockwasher

1/2flat

washer

1/2x 1

1/2x

1-1/2

9/16hex nut

9/16lockwasher

9/16flat

washer

9/16x

1-1/2

9/16x 2

5/8hex nut

5/8lockwasher

5/8flat

washer

5/8x

1-1/2

5/8x 2

3/4hex nut

3/4lockwasher

3/4flat

washer

3/4x

1-1/2

3/4x 2

5/16x 1

3/8x 2

7/16x 2

1/2x 2

9/16x

2-1/2

5/8x

2-1/2

3/4x

2-1/2

1/4x

1-1/2

5/16x

1-1/2

3/8x

2-1/2

7/16x

2-1/2

1/2x

2-1/2

9/16x 3

5/8x 3

3/4x 3

1/4x 2

5/16x 2

3/8x 3

7/16x 3

1/2x 3

9/16x

3-1/2

5/8x

3-1/2

3/4x

3-1/2

1/4x

2-1/2

5/16x

2-1/2

3/8x

3-1/2

7/16x

3-1/2

1/2x

3-1/2

9/16x 4

5/8x 4

3/4x 4

1/4x 3

5/16x 3

3/8x 4

7/16x 4

1/2x 4

HHAARRDDWWAARREE



80 BIN ASSORTMENTS

GRADE L9 Part No. 601088

GRADE 8 Part No. 5010881183 pieces64 items

GRADE 5 Part No. 501073L1472 pieces64 itemsPart No. 501073L available in half quantities, use Part No. 501073M.

LARGE DIAMETER Coarse & Fine Thread

9/16” THRU 1” DIAMETERS

GRADE L9 Part No. 601310470 pieces56 itemsContains USS flat washers only.

GRADE 8 Part No. 501310

GRADE 5 Part No. 501308545 pieces61 itemsContains both USS & SAE flat washers.

1/4 x 1/2

1/4 x 3/4

1/4 x 1

1/4 x 1-1/2

1/4 x 2

1/4 x 2-1/2

1/4 x 3

5/16 x1/25/16 x3/4

5/16 x 1

5/16 x 1-1/2

5/16 x 2

5/16 x 2-1/2

5/16 x 3

3/8 x 3/4

3/8 x 1

3/8 x 1-1/2

3/8 x 2

3/8 x 2-1/2

3/8 x 3

3/8 x 3-1/2

3/8 x 4

7/16 x 1

7/16 x 1-1/2

7/16 x 2

7/16 x 2-1/2

7/16 x 3

7/16 x 3-1/2

7/16 x 4

1/2 x 1-1/2

1/2 x 2

1/2 x 2-1/2

1/2 x 3

1/2 x 3-1/2

1/2 x 4

9/16 x 2

9/16 x 2-1/2

9/16 x 3

9/16 x 4

5/8 x 2

5/8 x 2-1/2

5/8 x 3

5/8 x 4

1/4-20

5/16-18

3/8-16

7/16-14

1/2-13

9/16-12

5/8-11

1/4

5/16

3/8

7/16

1/2

9/16

5/8

1/4

5/16

3/8

7/16

1/2

9/16

5/8

CAP SCREWSUSS (coarse)

USS FLAT LOCKNUTS WASHERS WASHERS

1/4 x 1/2

1/4 x 1

1/4 x 1-1/2

1/4 x 2

1/4 x 2-1/2

5/16 x 1

5/16 x 1-1/2

5/16 x 2

5/16 x 2-1/2

5/16 x 3

3/8 x 1

3/8 x 1-1/2

3/8 x 2

3/8 x 2-1/2

3/8 x 3

3/8 x 3-1/2

3/8 x 4

7/16 x 1

7/16 x 1-1/2

7/16 x 2

7/16 x 2-1/2

7/16 x 3

7/16 x 3-1/2

7/16 x 4

1/2 x 1

1/2 x 1-1/2

1/2 x 2

1/2 x 2-1/2

1/2 x 3

1/2 x 3-1/2

1/2 x 4

1/2 x 4-1/25/8 x 1-1/2

5/8 x 2

5/8 x 2-1/2

5/8 x 3

5/8 x 3-1/2

5/8 x 4

5/8 x 4-1/2

5/8 x 5

5/8 x 5-1/2

5/8 x 6

3/4 x 2

3/4 x 2-1/2

3/4 x 3

3/4 x 3-1/2

3/4 x 4

3/4 x 4-1/2

3/4 x 5

3/4 x 5-1/2

3/4 x 6

1/4-20

5/16-18

3/8-16

7/16-14

1/2-13

5/8-11

3/4-10

1/4

5/16

3/8

7/16

1/2

5/8

3/4

1/4

5/16

3/8

7/16

1/2

5/8

3/4


USS FLAT LOCKNUTS WASHERS WASHERS

9/16 x 2

9/16 x 2-1/2

9/16 x 3

9/16 x 4

5/8 x 2

5/8 x 2-1/2

5/8 x 3

5/8 x 4

3/4 x 1-1/2

3/4 x 2

3/4 x 2-1/2

3/4 x 3

3/4 x 3-1/2

7/8 x 2

7/8 x 3

7/8 x 4

1 x 3

1 x 4

9/16 x 2

9/16 x 2-1/2

9/16 x 3

9/16 x 4

5/8 x 2

5/8 x 2-1/2

5/8 x 3

5/8 x 4

3/4 x 1-1/2

3/4 x 2

3/4 x 2-1/2

3/4 x 3

3/4 x 3-1/2

7/8 x 2

7/8 x 3

7/8 x 4

1 x 3

1 x 4

9/16-12

5/8-11

3/4-11

7/8-9

1-8

9/16-18

5/8-18

3/4-16

7/8-14

1-14

9/16

5/8

3/4

7/8

1

9/16

5/8

3/4

7/8

1

CAP SCREWSUSS (coarse) SAE (fine)

USS SAE FLAT LOCKNUTS NUTS WASHERS WASHERS

SMALL DIAMETER Coarse Thread

1/4” THRU 5/8” DIAMETERS


1/4” THRU 3/4” DIAMETERS



*Comes with bin label set and (2) #12021 bins.

*Comes with bin label set and (2) #12021 bins.

Comes with bin label set and(2) #12021 bins.

HHAARRDDWWAARREE




1/4x 1/2

5/16x

1-1/2

3/8x

2-1/2

1/2x 3

3/8SAE flatwasher

1/4x 3/4

5/16x 2

3/8x 3

1/4hex nut

7/16SAE flatwasher

1/4x 1

5/16x

2-1/2

7/16x 1

5/16hex nut

1/2SAE flatwasher

1/4x

1-1/2

3/8x 3/4

7/16x

1-1/2

3/8hex nut

1/4lockwasher

1/4x 2

3/8x 1

7/16x 2

7/16hex nut

5/16lockwasher

5/16x 3/4

3/8x

1-1/4

1/2x

1-1/2

1/2hex nut

3/8lockwasher

5/16x 1

3/8x

1-1/2

1/2x 2

1/4SAE flatwasher

7/16lockwasher

5/16x

1-1/4

3/8x 2

1/2x

2-1/2

5/16SAE flatwasher

1/2lockwasher

40 BIN GRADE 5 HARDWARE

FEATURES / BENEFITS

� The most popular sizes of cap screws, nuts, flatwashers and lock washers 1/4” through 1/2” diameters.

� 40 compartment cabinet. (12021)Measures: 35” wide x 21” high x 12” deep

� Grade 5 cap screws are manufactured from1038 carbon steel for a minimum tensile strength of120,000 PSI.

Assortment contains:


GRADE L9 COARSE (USS) ASSORTMENT799 pieces40 itemsIncludes bin labels and#12021 bin


GRADE 8 COARSE (USS) ASSORTMENT799 pieces40 itemsIncludes bin labels and#12021 bin


GRADE 8 FINE (SAE) ASSORTMENT799 pieces40 itemsIncludes bin labels and#12021 bin


USS COARSE THREADPart No. 501304L

SAE FINE THREADPart No. 501560L

1606 pieces40 itemsIncludes bin labels and#12021 bin

Half quantities available, use Part No.501304M for Coarse thread and No.501560M for Fine thread.

40 BIN ASSORTMENTSSOSMETAL PRODUCTS INC. HHAARRDDWWAARREE

A10-4AREVISED FEBRUARY, 2009


GRADE 8 - Coarse Part No. 501741

GRADE 8 - Fine Part No. 501742487 pieces40 items



GRADE 5 - Coarse Part No. 501739

GRADE 5 - Fine Part No. 501740633 pieces40 items



Comes with bin label set and #12021 bin.

NEW!FEB./2009

NEW!FEB./2009

9/16x29/16x

2-1/29/16x39/16x49/16x5

5/8x25/8x

2-1/25/8x35/8x45/8x5

3/4x

2-1/23/4x33/4x43/4x53/4x6

7/8x

2-1/27/8x37/8x47/8x57/8x6

1x31x

3-1/21x41x51x6

9/16hex nut

5/8hex nut

3/4hex nut

7/8hex nut

1hex nut

9/16split lockwasher

5/8split lockwasher

3/4split lockwasher

7/8split lockwasher

1split lockwasher

9/16flat

washer

5/8flat

washer

3/4flat

washer

7/8flat

washer

1flat

washer



9/16x29/16x

2-1/29/16x39/16x49/16x5

5/8x25/8x

2-1/25/8x35/8x45/8x5

3/4x

2-1/23/4x33/4x43/4x53/4x6

7/8x

2-1/27/8x37/8x47/8x57/8x6

1x31x

3-1/21x41x51x6

9/16hex nut

5/8hex nut

3/4hex nut

7/8hex nut

1hex nut

9/16split lockwasher

5/8split lockwasher

3/4split lockwasher

7/8split lockwasher

1split lockwasher

9/16flat

washer

5/8flat

washer

3/4flat

washer

7/8flat

washer

1flat

washer


THIS PAGE INTENTIONALLY LEFT BLANK

HHAARRDDWWAARREE



40 BIN ASSORTMENTS

GRADE L9 Part No. 601065


GRADE 5 Part No. 501040L1240 pieces40 itemsPart No. 501040L available in half quantities, use Part No. 501040M.



GRADE L9 Part No. 601309178 pieces32 itemsContains USS flat washers only.


GRADE 5 Part No. 501307213 pieces35 itemsContains both USS & SAE flat washers.

1/4 x 3/4

1/4 x 1

1/4 x1-1/25/16 x 3/4

5/16 x 1

5/16 x1-1/2

5/16 x 2

3/8 x 3/4

3/8 x 1

3/8 x1-1/2

3/8 x 2

7/16 x 2

1/2 x 1

1/2 x1-1/2

1/2 x 2

1/4 x 3/4

1/4 x 1

1/4 x 1-1/25/16 x3/4

5/16 x 1

5/16 x1-1/2

5/16 x 2

3/8 x 3/4

3/8 x 1

3/8 x1-1/2

3/8 x 2

7/16 x 2

1/2 x 1

1/2 x1-1/2

1/2 x 2

1/4-20

5/16-18

3/8-16

7/16-14

1/2-13

1/4-28

5/16-24

3/8-24

7/16-20

1/2-20


USS SAENUTS NUTS

3/4 x1-1/2

3/4 x 2

3/4 x2-1/2

3/4 x 3

3/4 x3-1/2

7/8 x 2

7/8 x 3

7/8 x 4

1 x 3

1 x 4

3/4 x1-1/2

3/4 x 2

3/4 x2-1/2

3/4 x 3

3/4 x3-1/2

7/8 x 2

7/8 x 3

7/8 x 4

1 x 3

1 x 4

3/4-10

7/8-9

1-8

3/4-16

7/8-14

1-14

3/4

7/8

1

3/4

7/8

1

CAP SCREWSUSS (coarse) SAE (fine)

USS SAE FLAT LOCKNUTS NUTS WASHERS WASHERS

SMALL DIAMETER Coarse & Fine Thread

1/4” THRU 1/2” DIAMETERSCAP SCREWSSAE (fine)



HHAARRDDWWAARREE




18 DRAWER COARSE & FINE THREADGRADE 5 HARDWARE ASSORTMENT920 pieces50 itemswith bin label set and#12020 cabinet

Part No. 501049� The most popular sizes, plus nuts, flat washers andlock washers 1/4” through 1/2” diameters.

1/4x 3/4

3/8x 3/4

1/2x 3

1/2SAE flatwasher

1/4x 2

3/8x 2

1/4x 1

3/8x 1

1/4USShex nut

1/4lockwasher

5/16x3/4

1/4x

1-1/2

3/8x

1-1/2

5/16USShex nut

5/16lockwasher

5/16x1

1/4x 2

3/8x 2

3/8USShex nut

3/8lockwasher

5/16x

1-1/2

5/16x3/43/8x

2-1/2

1/2USShex nut

1/2lockwasher

5/16x 2

5/16x 1

1/2x

1-1/2

1/4SAE flatwasher

1/4x 3/4

3/8x 3/4

5/16x

1-1/21/2x

1-3/45/16SAE flatwasher

1/4x 1

3/8x 1

5/16x 2

1/2x

2-1/2

3/8SAE flatwasher

1/4x

1-1/2

3/8x

1-1/2

3/8x

2-1/2

1/2x

1-1/2

1/2x

1-3/4

1/2x

2-1/2

1/2x3

1/4SAEhex nut

5/16SAEhex nut

3/8SAEhex nut

1/2SAEhex nutSAE FINE

USS COARSE

� 18 drawer cabinet12020 cabinet measures; 33-3/4” wide x 11” high x 11-5/8 deep

� Manufactured from 1038 carbon steelfor a minimum tensile strength of120,000 PSI.


GRADE L9 COARSE (USS) & FINE (SAE )ASSORTMENT680 pieces50 itemsIncludes bin labels and#12020 cabinet

Part No. 601086

GRADE 8 COARSE (USS) & FINE (SAE )ASSORTMENT968 pieces50 itemsIncludes bin labels and#12020 cabinet

Part No. 501086

HHAARRDDWWAARREE



18 DRAWER FASTENER ASSORTMENT

“MOST USED” STANDARDFASTENER ASSORTMENT

Part No. 5014665844 pieces89 items12020 18 drawer steel cabinetIncludes bin label set

USS Coarse Grade 5 cap screws22 sizes from 1/4-20 x 1/2 through1/2-13 x 3

Round head machine screws11 sizes from 8-32 x 1/2 through1/4-20 x 1-1/2

Pan head sheet metal screws15 sizes from 6 x 1/2through 14 x 1

Hex slotted washer head sheet metal screws11 sizes from 8 x 1/2through 14 x 1

Our 501466 “Most Used” fastener assortment gives you a complete inventoryof the most frequently used fasteners, all inone assortment. 89 different items, 5844 piecesin one convenient package.

Cotter pins10 sizes from 1/16 x 1/2through 1/8 x 2

USS Hex Nuts6 sizes from8-32 through 1/2-13

Flat Washers6 from #8 through 1/2

Lock Washers6 sizes from #8 through 1/2

The "Most Used" fastener assortment includes the 1202018-drawer steel cabinet pictured above.The cabinet measures 33-3/4 inches wide, 11 inches high,and 11-5/8 inches deep.Molded steel handles won't bend, loosen or break.

HHAARRDDWWAARREE



STEEL TRAY ASSORTMENTS

USS GRADE 5 HARDWARESTEEL TRAY ASSORTMENT1042 pieces24 items

Part No. 501001LHalf quantities available, use 501001M

� Includes cap screws, nuts, flat and lock washers.� Sizes from 1/4” x 1/2” to 1/2” x 1-1/2”.

The same popular sizes are available in USS (Coarse) or SAE (Fine) in 3 Grades:

Contains the most popular sizes.Manufactured from 1038 quenched and temperedcarbon steel, with 120,000 PSI minimum tensilestrength. Rust and corrosion resistant LUSTER-PLATE™.All assortments on this page come in a sturdy steeltray, which fits into both the 12007 and 12019 sliderack, part of Our complete line of storage cabinets.

USSGrade 8

PPaarrtt NNoo.. 501084518 pieces24 items

USSGrade L9


SAEGrade 5

PPaarrtt NNoo.. 501002L1122 pieces24 items

Half quantities available,

use 501002M

SAEGrade 8


SAEGrade L9

PPaarrtt NNoo..601085542 pieces24 items

HHAARRDDWWAARREE



SUPRALLOY L9® CAP SCREWS/HEX NUTS/WASHERS

LENGTH 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

1/2 USS 602501 602518 602535SAE 602701

3/4 USS 602503 602520 602537 602556 602575SAE 602703 602720 602737

1 USS 602505 602522 602539 602558 602577 602594 602604SAE 602705 602722 602739 602758 602777 602804

1-1/4 USS 602506 602523 602540 602559 602578 602595* 602605SAE 602706 602723 602740 602759 602778 602795* 602821*

1-1/2 USS 602507 602524 602541 602560 602579 602596 602606 602622SAE 602707 602724 602741 602760 602779 602796 602806 602822

1-3/4 USS 602508 602525 602542 602561 602580 602607 602623SAE 602708* 602725 602742 602761 602780 602807 602823

2 USS 602509 602526 602543 602562 602581 602598 602608 602624 602637 602650SAE 602709 602726 602743 602762 602781 602798 602808 602824 602837

2-1/4 USS 602527* 602544 602582 602609 602625SAE 602710* 602727* 602744 602782 602809 602825 602838*

2-1/2 USS 602511 602528 602545 602564 602583 602600 602610 602626 602639 602652SAE 602711 602728 602745 602764 602783 602800 602810 602826 602839 602852

2-3/4 USS 602512* 602565* 602611 602627 602640* 602653*SAE 602712* 602765* 602811 602827 602840* 602853*

3 USS 602513 602530 602547 602566 602585 602602 602612 602628 602641 602654SAE 602713 602730 602747 602766 602785 602802 602812 602828 602841 602854

3-1/2 USS 602515* 602532 602549 602568 602587 602603 602613 602630 602643 602656SAE 602749 602768 602787 602803 602813 602830 602843 602856

4 USS 602534 602551 602570 602589 602601 602615 602632 602645 602657SAE 602717* 602734* 602751 602770 602789 602801 602815 602832 602845 602857

4-1/2 USS 602519* 602552 602571* 602590 602614* 602616 602633 602646 602658SAE 602719* 602736* 602752* 602771* 602790* 602816 602833 602846 602858

5 USS 602553 602572 602591 602618 602617 602634 602647 602659SAE 602721* 602738* 602753* 602791 602818* 602817 602834 602847 602859

5-1/2 USS 602574* 602662 602635 602648 602660SAE 602755* 602774* 602792* 602862 602835 602848 602860

6 USS 602533* 602554 602573 602593 602619 602636 602649 602661SAE 602733* 602750* 602773* 602793 602819 602836 602849 602861

Ideal for farms, manufacturers, maintenance shops, railroads,amusement parks, construction, equipment rental

CAP SCREWS

50

25

15

10

5

USS 602901 602902 602903 602904 602905 602906 602907 602908 602909 602910SAE 602911 602912 602913 602914 602915 602916 602917 602918 602919 602920

� Engineered to meet 180,000 to 200,000 PSI. tensile strength.� 23% taller head for greater wrenching and less wrench slippage.� Rolled thread & chamfered tip provides easy starting.� YELLOW DICHROMATE™ plated against rust and corrosion and to produce accurate torque.

� Replaces private brand bolts such as: MC-12, Tru-Torq, Karalloy, Bowmalloy, Dura-Torq, Supertanium.

� Exceeds ASTMB633, Type IISCI specifications.

50

L9HEX NUTS

L9 FLAT WASHERS

122550100

602941 602942 602943 602944 602945 602946 602947 602948 602949 602950

USS 20 18 16 14 13 12 11 10 9 8SAE 28 24 24 20 20 18 18 16 14 14

THREADSPER INCH

15 1025 5

DIAMETER

*These items will be discontinued when stock is depleted.

USS 602921 602922 602923 602924 602925 602926 602927 602928 602929 602930SAE 602931 602932 602933 602934 602935 602936 602937 602938 602939 602940

50

L9LOCK NUTS

1025 5

HHAARRDDWWAARREE



ALLOY GRADE 8 CAP SCREWS/HEX NUTS/WASHERS

LENGTH 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

1/2’ USS 502501 502518 502535SAE 502701 502718 502735

3/4 USS 502503 502520 502537 502556 502575SAE 502703 502720 502737 502756 502775

1 USS 502505 502522 502539 502558 502577 502594 502604 502620SAE 502705 502722 502739 502758 502777 502794 502804 502820

1-1/4 USS 502506 502523 502540 502559 502578 502595 502605 502621SAE 502706 502723 502740 502759 502778 502795 502805 502821

1-1/2 USS 502507 502524 502541 502560 502579 502596 502606 502622SAE 502707 502724 502741 502760 502779 502796 502806 502822

1-3/4 USS 502508 502525 502542 502561 502580 502597 502607 502623SAE 502708 502725 502742 502761 502780 502797 502807 502823

2 USS 502509 502526 502543 502562 502581 502598 502608 502624 502637 502650SAE 502709 502726 502743 502762 502781 502798 502808 502824 502837 502850

2-1/4 USS 502510 502527 502544 502563 502582 502609 502625 502638SAE 502710 502727 502744 502763 502782 502809 502825 502838

2-1/2 USS 502511 502528 502545 502564 502583 502600 502610 502626 502639 502652SAE 502711 502728 502745 502764 502783 502800 502810 502826 502839 502852

2-3/4 USS 502512 502529 502546 502565 502584 502611 502627 502640 502653SAE 502712 502729 502746 502765 502784 502811 502827 502840 502853

3 USS 502513 502530 502547 502566 502585 502602 502612 502628 502641 502654SAE 502713 502730 502747 502766 502785 502802 502812 502828 502841 502854

3-1/4 USS 502514 502531 502548 502567 502586SAE 502714 502731 502748 502767 502786

3-1/2 USS 502515 502532 502549 502568 502587 502603 502613 502630 502643 502656SAE 502715 502732 502749 502768 502787 502803 502813 502830 502843 502856

4 USS 502517 502534 502551 502570 502589 502601 502615 502632 502645 502657SAE 502717 502734 502751 502770 502789 502801 502815 502832 502845 502857

4-1/2 USS 502519 502536 502552 502571 502590 502614 502616 502633 502646 502658SAE 502719 502736 502752 502771 502790 502814 502816 502833 502846 502858

5 USS 502521 502538 502553 502572 502591 502618 502617 502634 502647 502659SAE 502721 502738 502753 502772 502791 502818 502817 502834 502847 502859

5-1/2 USS 402201 402206 502555 502574 502592 502663 502662 502635 502648 502660SAE 402401 402406 502755 502774 502792 502862 502835 502848 502860

6 USS 502533 502550 502554 502573 502593 502631 502619 502636 502649 502661SAE 502733 502750 502754 502773 502793 502831 502819 502836 502849 502861

6-1/2 USS 402202 402207 402211 402217 402101 402108 402115 402121 402126SAE 402402 402407 402411 402417 402150 402154 402158 402162 402165

7 USS 402203 402208 402212 402218 402102 402109 402116 402122 402127SAE 402403 402408 402412 402418 402151 402155 402159 402163 402166

7-1/2 USS 402204 402209 402213 402219 402103 402110 402117 402140 402137SAE 402404 402409 402413 402419 402152 402156 402160 402450 402175

8 USS 402205 402210 402214 402220 402104 402111 402118 402123 402128SAE 402405 402410 402414 402420 402153 402157 402161 402164 402167

CAP SCREWS

100

50

30

10

20

3

USS 502675 502677 502679 502681 502683 502685 502687 502689 502691 502693SAE 502676 502678 502680 502682 502684 502686 502688 502690 502692 502694

10203050100

HEX NUTS

FLAT WASHERS

2550100200

504285 504286 504287 504288 504289 504290 504291 504292 504293 504294

2550100

LOCK WASHERS

USS 504230 504231 504232 504233 504234 504235 504236 504237 504238 504239SAE 504275 504276 504277 504278 504279 504280 504281 504282 504283 504284

USS 20 18 16 14 13 12 11 10 9 8SAE 28 24 24 20 20 18 18 16 14 14

THREADSPER INCH

Used by manufacturing & processing plants, school buses, mining, construction and fleets.

�� Minimum tensile strength 150,000 PSI. �� Medium carbon Alloy steel.

DIAMETER

HHAARRDDWWAARREE



ALLOY GRADE 8 CAP SCREWS

USS 502679 502683 502687 502689 502691 502693 502695 502697 502671 502699 502673 502674SAE 502680 502684 502688 502690 502692 502694 502696 502698 502672 502670

504287 504289 504291 504292 504293 504294 504295 504296 504298 504297 50829 50830

�� Black finish. �� Sizes listed on this page are non-stock. Allow 2-3 weeks for delivery.

HEX NUTS

LOCK WASHERS

FLAT WASHERS

USS 504232 504234 504236 504237 504238 504239 504240 504241 504242SAE 504277 504279 504281 504282 504283 504284 504272 504273 504326 504274 504327 504328

DIAMETER

USS 16 13 11 10 9 8 7 7 6 6 5 4-1/2SAE 24 20 18 16 14 14 12 12 12 12

THREADSPER INCH

Longer Lengths / Larger Diameters

LENGTH 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

3 USS 502975 502983SAE 402179 402461

3-1/2 USS 402242 402255SAE 402180 402462

4 USS 502976 502984 402268 502991 402292 402307SAE 402181 402463 402482 402497

4-1/2 USS 402243 402256 402269 402283 402293 402308SAE 402182 402464 402483 402498

5 USS 502977 502985 402270 502992 402294 402309SAE 402183 402465 402484 402499

5-1/2 USS 402244 402257 402271 402284 402295 402310SAE 402184 402466 402485 402500

6 USS 502978 502986 402272 502993 402296 402311SAE 402185 402467 402486 402501

6-1/2 USS 402245 402258 402285SAE 402186 402468 402502

7 USS 502979 502987 402273 502994 402297 402312SAE 402187 402469 402487 402503

7-1/2 USS 402246 402259SAE 402188 402470

8 USS 502980 502988 402274 502995 402298 402313SAE 402189 402471 402488 402504

8-1/2 USS 402105 402112 402234 402141 402138 402247 402260SAE 402421 402430 402440 402451 402176 402190 402472

9 USS 402215 402106 402113 402119 402124 402129 502981 502989 402275 502996 402299 402314SAE 402415 402422 402431 402441 402452 402177 402191 402473 402489 402505

9-1/2 USS 402221 402227 402235 402142 402139 402248 402261SAE 402423 402432 402442 402453 402178 402192 402474

10 USS 402216 402107 402114 402120 402125 402130 502982 502990 402276 502997 402300 402315SAE 402416 402424 402433 402443 402454 402168 402193 402475 402490 402506

11 USS 402222 402228 402236 402143 402131 402249 402262 402277 402286 402301 402316SAE 402425 402434 402444 402455 402169 402194 402476 402491 402507

12 USS 402223 402229 402237 402144 402132 402250 402263 402278 402287 402302 402317SAE 402426 402435 402445 402456 402170 402195 402477 402492 402508

13 USS 402224 402230 402238 402145 402133 402251 402264 402279 402288 402303 402318SAE 402427 402436 402446 402457 402171 402196 402478 402493 402509

14 USS 402225 402231 402239 402146 402134 402252 402265 402280 402289 402304 402319SAE 402428 402437 402447 402458 402172 402197 402479 402494 402510

15 USS 402226 402232 402240 402147 402135 402253 402266 402281 402290 402305 402320SAE 402429 402438 402448 402459 402173 402198 402480 402495 402511

16 USS 402233 402241 402148 402136 402254 402267 402282 402291 402306 402321SAE 402439 402449 402460 402174 402199 402481 402496 402512

These sizes

available in

Zinc-Yellow Dichromate

finish only.

Please see listing on

page A10-10.

HHAARRDDWWAARREE



GRADE 5 CAP SCREWS / HEX NUTS / WASHERS

LENGTH 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

1/2 USS 502100 502111 502122SAE 502300 502311 502322

5/8 USS 502257 502258 502259SAE 502457 502458 502459

3/4 USS 502101 502112 502123 502135 502147SAE 502301 502312 502323 502335 502347

1 USS 502102 502113 502124 502136 502148 502161 502174 502187SAE 502302 502313 502324 502336 502348 502361 502374 502387

1-1/4 USS 502103 502114 502125 502137 502149 502162 502175 502188SAE 502303 502314 502325 502337 502349 502362 502375 502388

1-1/2 USS 502104 502115 502126 502138 502150 502163 502176 502189 502200 502211SAE 502304 502315 502326 502338 502350 502363 502376 502389 502400 502411

1-3/4 USS 502105 502116 502127 502139 502151 502164 502177 502190 502201 502212SAE 502305 502316 502327 502339 502351 502364 502377 502390 502401 502412

2 USS 502106 502117 502128 502140 502152 502165 502178 502191 502202 502213SAE 502306 502317 502328 502340 502352 502365 502378 502391 502402 502413

2-1/4 USS 502222 502225 502230 502236 502242 502246 502247 502251 502255SAE 502422 502425 502430 502436 502442 502446 502447 502451 502455

2-1/2 USS 502107 502118 502129 502141 502153 502166 502179 502192 502203 502214SAE 502307 502318 502329 502341 502353 502366 502379 502392 502403 502414

2-3/4 USS 502223 502226 502231 502237 502243 502248 502252SAE 502423 502426 502431 502437 502443 502448 502452

3 USS 502108 502119 502130 502142 502154 502167 502180 502193 502204 502215SAE 502308 502319 502330 502342 502354 502367 502380 502393 502404 502415

3-1/4 USS 502224 502227 502232 502238 502244 502249 502253 502256SAE 502424 502427 502432 502438 502444 502449 502453 502456

3-1/2 USS 502109 502120 502131 502143 502155 502168 502181 502194 502205 502216SAE 502309 502320 502331 502343 502355 502368 502381 502394 502405 502416

3-3/4 USS 502233 502239 502245 502250 502254SAE 502433 502439 502445 502450 502454

4 USS 502110 502121 502132 502144 502156 502169 502182 502195 502206 502217SAE 502310 502321 502332 502344 502356 502369 502382 502395 502406 502417

4-1/2 USS 402601 502228 502133 502145 502157 502170 502183 502196 502207 502218SAE 402701 502428 502333 502345 502357 502370 502383 502396 502407 502418

5 USS 402602 502229 502134 502146 502158 502171 502184 502197 502208 502219SAE 402702 502429 502334 502346 502358 502371 502384 502397 502408 502419

5-1/2 USS 402603 402609 502234 502240 502159 502172 502185 502198 502209 502220SAE 402703 402709 502434 502440 502359 502372 502385 502398 502409 502420

6 USS 402604 402610 502235 502241 502160 502173 502186 502199 502210 502221SAE 402704 402710 502435 502441 502360 502373 502386 502399 502410 502421

200

100

50

10

DIAMETER

USS 503260 503262 503264 503266 503268 503270 503272 503274 503276 503278SAE 503261 503263 503265 503267 503269 503271 503273 503275 503277 503279

ALL 50815 50816 50817 50818 50819 50820 50821 50822 50823 50824

HEX NUTS

LOCK WASHERS

FLAT WASHERS

USS 50906 50907 50908 50909 50910 50911 50912 50913 50914 50915SAE 50924 50925 50926 50927 50928 50929 50930 50931 50932 50933

USS 20 18 16 14 13 12 11 10 9 8SAE 28 24 24 20 20 18 18 16 14 14

THREADSPER INCH

102550100

50100200400 25

50100200400 25

�� Minimum tensile strength 120,000 PSI. �� Medium carbon steel, quenched & tempered.

CAP SCREWS

Used universally by industrial, maintenance,automotive, and fleets.

HHAARRDDWWAARREE



GRADE 5 CAP SCREWS

LENGTH 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2

3 USS 402662 402677SAE 402762 402777

3-1/2 USS 402663 402678SAE 402763 402778

4 USS 402664 402679 402692*SAE 402764 402779

4-1/2 USS 402665 402680 402693*SAE 402765 402780

5 USS 402666 402681 402694*SAE 402766 402781

5-1/2 USS 402667 402682 402695*SAE 402767 402782

6 USS 402668 402683 402696*SAE 402768 402783

6-1/2 USS 402605 402611 402615 402619 402623 402630 402638 402646 402654 402669 402684SAE 402705 402711 402715 402719 402723 402730 402738 402746 402754 402769 402784

7 USS 402606 402612 402616 402620 402624 402631 402639 402647 402655 402670 402685 402697*SAE 402706 402712 402716 402720 402724 402731 402739 402747 402755 402770 402785

7-1/2 USS 402607 402613 402617 402621 402625 402632 402640 402648 402656 402671 402686SAE 402707 402713 402717 402721 402725 402732 402740 402748 402756 402771 402786

8 USS 402608 402614 402618 402622 402626 402633 402641 402649 402657 402672 402687 402698*SAE 402708 402714 402718 402722 402726 402733 402741 402749 402757 402772 402787

8-1/2 USS 402627 402634 402642 402650 402658 402673 402688SAE 402734 402742 402750 402758 402773 402788

9 USS 402628 402635 402643 402651 402659 402674 402689SAE 402735 402743 402751 402759 402774 402789

9-1/2 USS 402644 402652 402660 402675 402690SAE 402744 402752 402760 402775 402790

10 USS 402629 402636 402645 402653 402661 402676 402691 402699*SAE 402736 402745 402753 402761 402776 402791

12 USS 402637SAE 402737*

�� Sizes listed on this page are non-stock. Allow 2-3 weeks for delivery.

* Black finish only.

DIAMETER

10

5

2

These sizes are available

as stock items.

Please see listing on

page A10-12.

1

Longer Lengths / Larger Diameters

HHAARRDDWWAARREE



GRADE 2 CAP SCREWS

LENGTH PART PART PARTNUMBER NUMBER NUMBER

--- ---- -

504492 5

504493 5

504494 5

504495 5

504496 5

504497 5

504498 5

504499 5

--- -504483 10

504484 10

504485 10

504486 5

504487 5

504488 5

504489 5

504490 5

504491 5

504475 10

504476 10

504477 10

504478 10

504479 10

504480 10

504481 10

504482 10

--- ---- -

DIAMETER DIAMETER DIAMETER1/2-13 5/8-11 3/4-10

11-1/41-1/21-3/422-1/42-1/233-1/24

�� USS (Coarse threads.) �� Low carbon steel.

FLAT HEAD SLOTTED CAP SCREW

LENGTH 1/4 5/16 3/8 7/16 1/2 5/8 3/4

1/2 USS 502901

3/4 USS 502902 502910

1 USS 502903 502911 502920 502929

1-1/2 USS 502904 502912 502921 502930 502938 502948 502957

2 USS 502905 502913 502922 502931 502939 502949 502958

2-1/2 USS 502906 502914 502923 502932 502940 502950 502959

3 USS 502907 502915 502924 502933 502941 502951 502960

3-1/2 USS 502908 502916 502925 502934 502942 502952 502961

4 USS 502909 502917 502926 502935 502943 502953 502962

4-1/2 USS 502918 502927 502936 502944 502954 502963

5 USS 502919 502928 502937 502945 502955 502964

5-1/2 USS 502946

6 USS 502947 502956 502965

CAP SCREWS

200

100

50

25

Used in light duty, low stress applications. �� Low carbon steel - not heat treated. �� Available in coarse (USS) thread only.�� The “Shear Bolt” has special low strengthproperties that allow it to break or bend beforeexpensive equipment is damaged.

DIAMETER

USS 51205 51207 51209 51231 51213 51217 51219

ALL 50815 50816 50817 50818 50819 50821 50822

HEX NUTS

LOCK WASHERS

FLAT WASHERS

USS 50906 50907 50908 50909 50910 50912 50913SAE 50924 50925 50926 50927 50928 50930 50931

USS 20 18 16 14 13 11 10THREADSPER INCH

50100200

50100250500

100250500

30

50

NOTE: 502934 and 502941 - 40

HEX HEAD CAP SCREWS, NUTS AND WASHERS

HHAARRDDWWAARREE



SOCKET HEAD CAP SCREWS

� Exceeds Grade 8 specifications.� Includes 4 sizes of high collar lock washers.� Sizes from 1/4” x 1/2” to 1/2” x 1-3/4”.� USS - Coarse thread.

Contains the most popular sizes.Manufactured from alloy steel, heat treated, with a Class 3A fully formed thread.

501066, as well as 501318 and 501319 shown below comes in a sturdy steel tray which fits intoboth the 12007 and 12019 slide racks, part of Our complete line of storage cabinets.

SSOOCCKKEETT HHEEAADD CCAAPP SSCCRREEWWSS aanndd LLOOCCKK WWAASSHHEERRSSPart No. 501066

344 pieces • 20 items12017 steel tray

Numbers in assortment

503409503411503413503415503421

503422503423503424503428503430

503431503432503448503450503451

503452504263504264504265504267

CCOOAARRSSEE ((UUSSSS)) && FFIINNEE ((SSAAEE))with HEX KEY WRENCHES

Contains sizes:No. 10-24 x 1/2” to 3/8” x 2”

Part No. 501318144 pieces • 18 items12056 steel tray


113831113832113834113835503405

503407503409503411503413503416

503421503422503423503428503430

503431503432503434

CCOOAARRSSEE ((UUSSSS))

Contains sizes:1/4” x 1/2” to 3/8” x 1-1/2”

Part No. 503007120 pieces • 12 items12038 plastic tray


503409503411503413503415

503420503421503422503424

503428503430503431503432

SOCKET HEAD CAP SCREW ASSORTMENTS

Assortment picture is for display purposes only.Actual contents may vary.

–––– OTHER SOCKET HEAD CAP SCREW ASSORTMENTS AVAILABLE ––––

MMAASSTTEERR AASSSSOORRTTMMEENNTTCCOOAARRSSEE ((UUSSSS)) && FFIINNEE ((SSAAEE))



503398503399503401503402503404503405503406503407

503408503501503502503503503504503955503956503957

503958503959503960503961503962503963503964503965

503966503967503968503969503970503971503972

HHAARRDDWWAARREE




�� Alloy steel. �� Heat treated.�� Black finish. �� Class 3A fully formed thread.

�� Manufactured to meetANSI/ASME B18.3-1986standards.

�� Exceeds Grade 8 specifications.

Used for precision work.

LENGTH 0 1 2 3 4 5 6 8 10 1/4 5/16 3/8

1/8 USSSAE 504850 504854

3/16 USS 504709 504713SAE 504851 504855

1/4 USS 504710 504714 504717 504722 503955 503958SAE 504852 504856 504858

3/8 USS 504711 504715 504718 504723 503956 503959 503963 504732 504737SAE 504853 504857 504859 503968 504864

1/2 USS 504712 504716 504719 504724 503398 503401 503405 503409 503420 504746SAE 504860 503501 503505 503512 504872

5/8 USS 504720 504725 504727 503960 503964 503410 504738 504747SAE 504861 503969 503506 504868 504873

3/4 USS 504721 504726 503399 503402 503406 503411 503421 503428SAE 504862 503502 503507 503513 503519

7/8 USS 504728 504730 504731 503412 504739 503429SAE 504863 503508 504869 504874

1 USS 503957 503404 503407 503413 503422 503430SAE 503503 503509 503514 503520

1-1/4 USS 503961 503965 503414 503423 503431SAE 503970 503510 503515 503521

1-1/2 USS 503962 503408 503415 503424 503432SAE 503504 503511 503516 503522

1-3/4 USS 503966 503416 503425 503433SAE 503971 504865 504870 504875

2 USS 503967 503417 503426 503434SAE 503972 504866 503517 503523

2-1/4 USS 503418 504740 503435SAE 504867 504871 504876

2-1/2 USS 503419 503427 503436SAE 503518 504877

2-3/4 USS 504733 504741 504748SAE

3 USS 504734 504742 503437SAE 504878

3-1/4 USS 504743 504749SAE

3-1/2 USS 504735 504744 504750SAE

4 USS 504736 504745 504751SAE

4-1/2 USS 504752SAE

5 USS 504753SAE

6 USS 504754SAE

KEY .050 1/16 5/64 5/64 3/32 3/32 7/64 9/64 5/32 3/16 1/4 5/16SIZES 113804 113805 113806 113806 113807 113807 113808 113810 113811 113812 113814 113815

DIAMETER

100

10

25

50

HHAARRDDWWAARREE




LENGTH 7/16 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2

1/2 USS 504755 504762SAE

5/8 USS 504756 504763SAE

3/4 USS 503438 503447SAE

7/8 USS 504757 504764SAE

1 USS 503439 503448 503460SAE 504879 504883 504891

1-1/4 USS 503440 503450 503461 503472SAE 504880 504884 504892

1-1/2 USS 503441 503451 503462 503473SAE 504881 504885 504893

1-3/4 USS 503442 503452 503463 503474SAE 504886 504894

2 USS 503443 503453 503464 503475 503482 503488SAE 504882 504887 504895

2-1/4 USS 503444 503454 503465 504779 504786 503489SAE 504888

2-1/2 USS 503445 503455 503466 503476 503483 503490 504799SAE 504889 504896

2-3/4 USS 504758 503456 503467 504780 504787SAE

3 USS 503446 503457 503468 503477 503484 503491 504800 504813SAE 504890

3-1/4 USS 504759 504765SAE

3-1/2 USS 504760 503458 504773 503478 504788 503495 504801 504814SAE

4 USS 504761 503459 503469 503479 503485 503492 504802 504815SAE

4-1/2 USS 504766 504774 504781 504789 504794 504803 504816SAE

5 USS 504767 503470 503480 503486 503493 504804 504817SAE

5-1/2 USS 504768 504775 504782 504790 504795 504805 504818SAE

6 USS 504769 503471 503481 503487 503494 504806 504819SAE

6-1/2 USS 504770 504776 504783 504791 504796 504807 504820SAE

7 USS 504771 504777 504784 504792 504797 504808 504821SAE

8 USS 504772 504778 504785 504793 504798 504809 504822SAE

9 USS 504810 504823SAE

10 USS 504811 504824SAE

12 USS 504812 504825SAE

KEY 3/8 3/8 1/2 5/8 3/4 3/4 7/8 1SIZES 113816 113816 113818 113820 113821 113821 113822 113823

DIAMETER

25

10

5

2

1

HHAARRDDWWAARREE



SOCKET CAP SCREWS

LENGTH PART PART PART PART PART PART PARTNUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER

LOW HEAD SOCKET CAP SCREWSAPPLICATIONS

Specifically for use in parts too thin for standard height socket cap screwsand for applications with limited clearances.



504901504902504903504904504905504906

504907504908504909504910504911504912

504913504914504915504917504919504920

504921504922504924504925504926504927

504930504931504932504933

FEATURES / BENEFITS� Head height 1/2 of standard socket head cap screws.� Heat treated alloy steel.� Class 3A.� Coarse threads*.� Manufactured to meet ANSI B18.3 -1986 standards. � Exceeds Grade 8 specifications.

Assortment picture is fordisplay purposes only.Actual contents may vary.

*10-32 is fine thread

DIA. DIA. DIA. DIA. DIA. DIA. DIA.NO. 8-32 NO. 10-24 NO. 10-32 NO. 1/4-20 5/16-18 3/8-16 1/2-13.082 .095 .095 .125 .156 .187 .250

5/64 Key 3/32 Key 3/32 Key 1/8 Key 5/32 Key 3/16 Key 1/4 Key

3/81/25/83/411-1/41-1/2KEY #

504901 25 504906 25 504911 25 504916 25 --- - --- - --- -504902 25 504907 25 504912 25 504917 25 504922 25 504928 25 --- -504903 25 504908 25 504913 25 504918 25 504923 25 504929 25 --- -504904 25 504909 25 504914 25 504919 25 504924 25 504930 25 504934 10

504905 - 504910 - 504915 25 504920 25 504925 25 504931 25 504935 10

--- - --- - --- - 504921 25 504926 25 504932 25 504936 10

--- - --- - --- - --- - 504927 25 504933 25 504937 10

113806 113807 113807 113809 113811 113812 113814

HeadHeight

SOSMETAL PRODUCTS INC.AUTOMOTIVE and INDUSTRIAL PRODUCTS2945 East Tioga Street, Philadelphia, PA 19134 l (215) 739-6200

ASSORTMENT TRAY NO. 12062SOSMETAL NO.

Contents in this assortment can be found in catalog section A10 - CAP SCREWS.

LOW HEADSOCKET CAP SCREWS 501579

1

LIST

25

LIST

9

LIST

17

LIST

2

LIST

26

LIST

10

LIST

18

LIST

8

LIST

32

LIST

16

LIST

24

LIST

7

LIST

31

LIST

15

LIST

23

LIST

6

LIST

30

LIST

14

LIST

22

LIST

5

LIST

29

LIST

13

LIST

21

LIST

4

LIST

28

LIST

12

LIST

20

LIST

3

LIST

27

LIST

11

LIST

19

LIST

8-32 x 3/8Sosmetal No.504901

8-32 x 1/2Sosmetal No.504902

8-32 x 5/8Sosmetal No.504903

8-32 x 3/4Sosmetal No.504904

8-32 x 1Sosmetal No.504905

10-24 x 3/8Sosmetal No.504906

10-24 x 1/2Sosmetal No.504907

10-24 x 5/8Sosmetal No.504908


10-32 x 3/4Sosmetal No.504914

10-32 x 5/8Sosmetal No.504913

10-32 x 1/2Sosmetal No.504912

10-32 x 3/8Sosmetal No.504911


10-24 x 3/4Sosmetal No.504909

1/4-20 x 1/2Sosmetal No.504917

1/4-20 x 3/4Sosmetal No.504919

1/4-20 x 1Sosmetal No.504920

1/4-20 x 1-1/4Sosmetal No.504921

5/16-18 x 1/2Sosmetal No.504922

5/16-18 x 3/4Sosmetal No.504924

5/16-18 x 1Sosmetal No.504925

3/8-16 x 1-1/2Sosmetal No.504933

3/8-16 x 1-1/4Sosmetal No.504932

3/8-16 x 1Sosmetal No.504931

3/8-16 x 3/4Sosmetal No.504930

5/16-18 x 1-1/2Sosmetal No.504927

5/16-18 x 1-1/4Sosmetal No.504926

HHAARRDDWWAARREE



SOCKET CAP SCREWS

� Exceeds Grade 8 specifications.� Manufactured from alloy steel, heat treated, with aClass 3A fully formed thread. Meets ANSI/ASMEB 18.3-1986 standards.

� Minimum tensile strength:1/4 to 1/2 = 180,000 PSI1/2 & up = 170,000 PSI

� Flat head provides a flush finish.

Part No. 501316285 pieces • 16 items

12050 steel tray


503525503526503527503531503532503533

503534503537503538503539503540503541

503542503544503545503574

INDIVIDUAL FLAT HEAD SOCKET CAP SCREWS

FLAT HEAD SOCKET CAP SCREWSFor precision work use socket head cap screws.

Assortment picture is fordisplay purposes only.

Actual contents may vary.

LENGTH 2-56 3-48 4-40 5-40 6-32 8-32

3/16 USS 507500 507504

1/4 USS 507501 507505 507508 507513 507518

3/8 USS 507502 507506 507509 507514 507519 507523

1/2 USS 507503 507507 507510 507515 507520 503575

5/8 USS 507511 507516 507521 507524

3/4 USS 507512 507517 507522 507525

1 USS 507526

KEY .050 1/16 1/16 5/64 5/64 3/32SIZES 113804 113805 113805 113806 113806 113807

DIAMETER

50

25

5

10

30

20

20

5

5

10

50

25

50

50

25

25

DIAMETER

30

30

15

10

LENGTH 3/16 (#10) 1/4 5/16 3/8 7/16 1/2 5/8 3/4

3/8 USS 507527 507532SAE 503578 503585

1/2 USS 503576 503525 503531 507539SAE 503579 503586 503588

5/8 USS 507528 507533 507535 507540SAE 503580 503587 503589 503590

3/4 USS 507529 503526 503532 503574 507544 507550SAE 503581 503557 503561 503565 503569

1 USS 503577 503527 503533 503537 507545 503542SAE 503582 503558 503562 503566 503570

1-1/4 USS 507530 503528 503534 503538 507546 503543 503548 507555SAE 503583 503559 503563 503567 503571

1-1/2 USS 507531 503529 503535 503539 507547 503544 503549 503553SAE 503584 503560 503564 503568 503572

1-3/4 USS 507534 507536 507541 507548 507551 507553 507556SAE 503591

2 USS 503530 503536 503540 507549 503545 503550 503554SAE 503573

2-1/4 USS 507537 507542 507552 507554 507557SAE

2-1/2 USS 507538 503541 503546 503551 503555SAE

3 USS 507543 503547 503552 503556SAE

KEY 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2SIZES 113809 113811 113812 113813 113814 113815 113816 113818

USS 24 20 18 16 14 13 11 10SAE 32 28 24 24 20 20 18 16

THREADSPER INCH

HHAARRDDWWAARREE




A B C PART A B C PARTSHOULDER THREAD SHOULDER NUMBER SHOULDER THREAD SHOULDER NUMBERDIA. DIA.. LENGTH DIA. DIA. LENGTH

1/4 10-24 3/8 703201 24 3/8 5/16-18 3 703227 12

1/4 10-24 1/2 703202 24 3/8 5/16-18 3-1/2 703228 12

1/4 10-24 5/8 703203 24 3/8 5/16-18 4 703229 12

1/4 10-24 3/4 703204 24 1/2 3/8-16 1/2 703230 12

1/4 10-24 1 703205 24 1/2 3/8-16 5/8 703231 12

1/4 10-24 1-1/4 703206 24 1/2 3/8-16 3/4 703232 12

1/4 10-24 1-1/2 703207 24 1/2 3/8-16 1 703233 12

5/16 1/4-20 3/8 703208 24 1/2 3/8-16 1-1/4 703234 12

5/16 1/4-20 1/2 703209 24 1/2 3/8-16 1-1/2 703235 12

5/16 1/4-20 5/8 703210 24 1/2 3/8-16 1-3/4 703236 12

5/16 1/4-20 3/4 703211 24 1/2 3/8-16 2 703237 12

5/16 1/4-20 1 703212 24 5/8 1/2-13 1-1/4 703238 6

5/16 1/4-20 1-1/4 703213 24 5/8 1/2-13 1-1/2 703239 6

5/16 1/4-20 1-1/2 703214 24 5/8 1/2-13 1-3/4 703240 6

5/16 1/4-20 1-3/4 703215 24 5/8 1/2-13 2 703241 6

5/16 1/4-20 2 703216 24 5/8 1/2-13 2-1/4 703242 6

3/8 5/16-18 3/8 703217 24 5/8 1/2-13 2-1/2 703243 6

3/8 5/16-18 1/2 703218 24 5/8 1/2-13 3 703244 6

3/8 5/16-18 5/8 703219 24 5/8 1/2-13 3-1/2 703245 6

3/8 5/16-18 3/4 703220 24 5/8 1/2-13 4 703246 6

3/8 5/16-18 1 703221 24 3/4 5/8-11 1-1/2 703247 6

3/8 5/16-18 1-1/4 703222 24 3/4 5/8-11 1-3/4 703248 6

3/8 5/16-18 1-1/2 703223 24 3/4 5/8-11 2 703249 6

3/8 5/16-18 1-3/4 703224 24 3/4 5/8-11 2-1/2 703250 6

3/8 5/16-18 2 703225 24 3/4 5/8-11 3 703251 6

3/8 5/16-18 2-1/2 703226 12 3/4 5/8-11 3-1/2 703252 6

SOCKET HEAD SHOULDER SCREWS� Alloy steel.� USS threads.� Class 3A fully formed threads.� Knurled head for sure grip.

� Minimum tensile strength:1/4 to 1/2 = 180,000 PSI1/2 & up = 170,000 PSI

� Meets or exceeds Grade 8 specifications.

KKeeyy ssiizzeess:: 1/4" dia. - 1/8 key; 5/16" dia. - 5/32 key; 3/8" dia. - 3/16 key; 1/2 dia. - 1/4 key; 5/8" dia. - 5/16 key; 3/4" dia. - 3/8 key

MOVING SHAFT OR PIVOT

STATIONARY GUIDE

PULLEY SHAFT USES



703201703202703203703204703205

703207703208703209703211703212

703214703218703220703221703223

703225703232703233703235703237

703239703241703243

SOSMETAL PRODUCTS INC.AUTOMOTIVE and INDUSTRIAL PRODUCTS

2945 East Tioga Street, Philadelphia, PA 19134For Technical Support 1-800-441-8220 ext. 129


1

LIST

1/4” x 3/8”10-24 Thread

Sosmetal No. 703201

SOCKET HEAD SHOULDER SCREWS 501640*Illustrations are actual size unless otherwise noted.



www.sosmetal.com

7

LIST

5/16” x 3/8”1/4-20 Thread

Sosmetal No. 703208

13

LIST

3/8” x 3/4”5/16-18 Thread

Sosmetal No. 703220

19

LIST

1/2” x 1-1/2”3/8-16 Thread

Sosmetal No. 703235

2

LIST

1/4” x 1/2”10-24 Thread

Sosmetal No. 703202

8

LIST

5/16” x 1/2”1/4-20 Thread

Sosmetal No. 703209

14

LIST

3/8” x 1”5/16-18 Thread

Sosmetal No. 703221

20

LIST

1/2” x 2”3/8-16 Thread

Sosmetal No. 703237

3

LIST

1/4” x 5/8”10-24 Thread

Sosmetal No. 703203

9

LIST

5/16” x 3/4”1/4-20 Thread

Sosmetal No. 703211

15

LIST

3/8” x 1-1/2”5/16-18 Thread

Sosmetal No. 703223

21

LIST

4

LIST

1/4” x 3/4”10-24 Thread

Sosmetal No. 703204

10

LIST

5/16” x 1”1/4-20 Thread

Sosmetal No. 703212

16

LIST

3/8” x 2”5/16-18 Thread

Sosmetal No. 703225

22

LIST

5/8” x 1-1/2”1/2-13 Thread

Sosmetal No. 703239

5

LIST

1/4” x 1”10-24 Thread

Sosmetal No. 703205

11

LIST

5/16” x 1-1/2”1/4-20 Thread

Sosmetal No. 703214

17

LIST

1/2” x 3/4”3/8-16 Thread

Sosmetal No. 703232

23

LIST

5/8” x 2”1/2-13 Thread

Sosmetal No. 703241*

6

LIST

1/4” x 1-1/2”10-24 Thread

Sosmetal No. 703207

12

LIST

3/8” x 1/2”5/16-18 Thread

Sosmetal No. 703218

18

LIST

1/2” x 1”3/8-16 Thread

Sosmetal No. 703233

24

LIST

5/8” x 2-1/2”1/2-13 Thread

Sosmetal No. 703243*

HHAARRDDWWAARREE

A10-20AREVISED OCTOBER, 2004



BUTTON HEAD SOCKET CAP SCREWS

� Alloy steel, heat treated.� Exceeds Grade 8 specifications.� Maximum resistance to stretching,snapping, breaking or shearing.

� Low head height for streamlinedesign.

� Use for all fastening applications.� Minimum tensile strength 180,000P.S.I.


12071 steel tray


703255703257703259703260703261

703262703263703264703266703268

703270703272703274703276703278

703280703282703287703289



BUTTON SOCKET CAP SCREWS 501639Illustrations are not actual size.



www.sosmetal.com

1

LIST

6-32 x 3/8”

Sosmetal No. 703260

8-32 x 3/8”

Sosmetal No. 703263

2

LIST

10-24 x 3/4”

Sosmetal No. 703270

3

LIST

6

LIST

6-32 x 1/2”

Sosmetal No. 703261

8-32 x 1/2”

Sosmetal No. 703264

7

LIST

10-24 x 1”

Sosmetal No. 703272

8

LIST

11

LIST

6-32 x 5/8”

Sosmetal No. 703262

8-32 x 3/4”

Sosmetal No. 703266

12

LIST

10-32 x 1/2”

Sosmetal No. 703255

13

LIST

16

LIST

10-24 x 1/2”

Sosmetal No. 703268

17

LIST

10-32 x 3/4”

Sosmetal No. 703257

18

LIST

10-32 x 1”

Sosmetal No. 703259

4

LIST

5/16-18 x 1/2”

Sosmetal No. 703280

5

LIST

1/4-20 x 1/2”

Sosmetal No. 703274

9

LIST

5/16-18 x 3/4”

Sosmetal No. 703282

10

LIST

6-32 x 3/8”

Sosmetal No. 703276

14

LIST

3/8-16 x 3/4”

Sosmetal No. 703287

15

LIST

1/4-20 x 1”

Sosmetal No. 703278

19

LIST

3/8-16 x 1”

Sosmetal No. 703289

20

LIST

LENGTH PART PART PART PART PART PART PARTNUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER

DIA. DIA. DIA. DIA. DIA. DIA. DIA.2-56 3-48 4-40 6-32 8-32 10-24 10-32USS USS USS USS SAE USS SAE

3/161/43/81/25/83/47/81KEYSIZES

702050 50 702054 50 702058 50 --- - --- - --- - --- -702051 50 702055 50 702059 50 702062 50 702063 50 702066 50 702075 50

702052 50 702056 50 702060 50 703260 100 703263 100 703267 100 703254 100

702053 50 702057 50 702061 50 703261 100 703264 100 703268 100 703255 100

--- - --- - --- - 703262 100 703265 100 703269 100 703256 100

--- - --- - --- - --- - 703266 100 703270 100 703257 100

--- - --- - --- - --- - 702064 50 703271 100 703258 100

--- - --- - --- - --- - 702065 50 703272 100 703259 100

.050 1/16 1/16 5/64 3/32 1/8 1/8113804 113805 113805 113806 113807 113809 113809

LENGTH PART PART PART PART PART PART PART PARTNUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER

DDIIAA.. DIA. DIA. DIA. DIA. DIA. DIA. DIA.1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 1/2-13 5/8-11USS SAE USS SAE USS SAE USS USS

1/43/81/25/83/47/811-1/41-1/22KEYSIZES

702067 50 --- - --- - --- - --- - --- - --- - --- -703273 100 702076 50 703279 100 702082 50 --- - --- - --- - --- -703274 100 702077 50 703280 100 702083 50 703285 100 702088 50 --- - --- -703275 100 702078 50 703281 100 702084 50 703286 100 702089 50 --- - --- -703276 100 702079 50 703282 100 702085 50 703287 100 702090 50 --- - --- -703277 100 702080 50 703283 100 702086 50 703288 100 702091 50 --- - --- -703278 100 702081 50 703284 100 702087 50 703289 100 702092 50 703291 50 703295 25

--- - --- - --- - --- - 703290 100 702093 50 703292 50 703296 25

--- - --- - --- - --- - --- - --- - 703293 50 703297 25

--- - --- - --- - --- - --- - --- - 703294 50 703298 25

5/32 5/32 3/16 3/16 7/32 7/32 5/16 3/8113811 113811 113812 113812 113813 113813 113815 113816

THIS PAGE INTENTIONALLY LEFT BLANK

HHAARRDDWWAARREE





TAMPERPROOF SOCKET CAP SCREWSAPPLICATIONS

Prevents unauthorized removal of parts & equipment from vending machines, computers, telephone booths, electrical panels, control units, street signs, thermostats.

*10-32 is fine thread

Tamper-resistant pin in the center of the head prevents removal

by ordinary Hex keys.

Special sized hole toaccept pin at both ends

of hex key.

DIA. DIA. DIA. DIA. DIA. DIA. DIA. DIA.NO. 4-40 NO. 6-32 NO. 8-32 NO. 10-24 NO. 10-32 NO. 1/4-20 5/16-18 3/8-163/32 Key 7/64 Key 9/64 Key 5/32 Key 5/32 Key 3/16 Key 1/4 Key 5/16 Key

1/43/81/25/83/411-1/41-1/2KEY #

504501 25 504506 25 --- - --- - --- - --- -504502 25 504507 25 504511 25 504516 25 504523 25 504530 25

504503 25 504508 25 504512 25 504517 25 504524 25 504531 25 504537 25 504543 25

504504 25 504509 25 504513 25 504518 25 504525 25 504532 25 504538 25 504544 25

504505 25 504510 25 504514 25 504519 25 504526 25 504533 25 504539 25 504545 25

--- - --- - 504515 25 504520 25 504527 25 504534 25 504540 25 504546 25

--- - --- - --- - 504521 25 504528 25 504535 25 504541 25 504547 25

--- - --- - --- - 504522 25 504529 25 504536 25 504542 25 504548 25

213716 213717 213719 213720 213720 213721 213723 213724


12056 steel trayIncludes hex keys


213716213717213719213720213721213723

213724504503504505504508504510504512

504514504515504517504519504520504524

504526504527504533504534504535504539

504540504546504547

FEATURES / BENEFITS� Manufactured of heat treated alloy steel.� Coarse threads*.� Meets ANSI-B18.3 - 1986 specification.� Non-destructive pin is formed by special cold-heading process.� Minimum tensile strength 180,000 P.S.I. � Meets or exceeds Grade 8 specifications.

HHAARRDDWWAARREE






TAMPERPROOF FLAT HEAD SOCKET CAP SCREWS

TAMPERPROOF BUTTON HEAD SOCKET CAP SCREWS

Part No. 501551158 pieces • 25 items12056 steel trayIncludes hex keys


213716213718213720213721213722

504602504603504604504606504609

504610504612504614504616504617

504619504621504622504624504626

504627504628504630504634504635

Part No. 501550156 pieces • 25 items12056 steel trayIncludes hex keys


213716213718213720213721213722

504552504554504557504559504561

504563504564504566504568504569

504573504575504576504582504583

504584504588504589504595504596


1/43/81/25/83/411-1/41-1/2KEY #

504550 25 504555 25 --- - --- - --- - --- - --- - --- -504551 25 504556 25 504560 25 504565 25 504572 25 504579 25 --- - --- -504552 25 504557 25 504561 2 504566 25 504573 25 504580 25 504586 25 504592 25

504553 25 504558 25 504562 25 504567 25 504574 25 504581 25 504587 25 504593 25

504554 25 504559 25 504563 25 504568 25 504575 25 504582 25 504588 25 504594 25

--- - --- - 504564 25 504569 25 504576 25 504583 25 504589 25 504595 25

--- - --- - --- - 504570 25 504577 25 504584 25 504590 25 504596 25

--- - --- - --- - 504571 25 504578 25 504585 25 504591 25 504597 25

213716 213716 213716 213718 213718 213720 213721 213722


1/43/81/25/83/411-1/41-1/2KEY #

504601 25 504604 25 504608 25 --- - --- - --- - --- - --- -504602 25 504605 25 504609 25 504613 25 504618 25 504623 25 --- - --- -504603 25 504606 25 504610 25 504614 25 504619 25 504624 25 504628 25 504632 25

--- - 504607 25 504611 25 504615 25 504620 25 504625 25 504629 25 504633 25

--- - --- - 504612 25 504616 25 504621 25 504626 25 504630 25 504634 25

--- - --- - --- - 504617 25 504622 25 504627 25 504631 25 504635 25

--- - --- - --- - --- - --- - --- - --- - 504636 25

--- - --- - --- - --- - --- - --- - --- - --- -213716 213716 213716 213718 213718 213720 213721 213722

theboltofchoicefortheheavyequipmentindustrywanderlodgegurus.com/database/theory/infascobolt.pdfhighest...

Documents