the miracle coating! polycoat 750d what is it?

33
The Miracle Coating! Polycoat 750D What is it?

Upload: gemma-cantu

Post on 01-Jan-2016

34 views

Category:

Documents


2 download

DESCRIPTION

The Miracle Coating! Polycoat 750D What is it?. Polycoat 750D. Polycoat 750D is a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough, monolithic membrane with good water and chemical resistance. - PowerPoint PPT Presentation

TRANSCRIPT

The Miracle Coating!

Polycoat 750D

What is it?

Polycoat 750Dis a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough, monolithic

membrane with good water and chemical resistance.

It offers excellent abrasion resistant properties making it ideal for industrial or mining applications where constant abrasion is a concern.

Polycoat 750D

Physical Properties of cured product

Service temp. -50C to 200C. Shore hardness 50D approx.Elongation 340- 400%Tensile Strength 2650 psiTear Strength pli 410Abrasion Resistance, mg lost 110(100gms, 1000rev, H-18 wheels)

Polycoat 750D

 Some of the benefits of Polycoat 750D are: It can be sprayed to any thickness in a

single application It can be handled or walked on in 30

seconds It is 100% solids (0% VOC) It has a service temperature from -50 to

200 C

Polycoat 750D

  Highly resistant to impact over wide

temperature range. Excellent abrasion resistance even at high

temperatures. Resistant to cracking under high flex

conditions. Resistant to water and a wide range of

chemicals.

Polycoat 750D

 Chemical resistance tested against many corrosive and other reagents such as:

Gasoline, Diesel Fuel, Motor oil, Hydraulic Fluid, Toluene, Xylene,

Sulphuric Acid, HCl, Phosphoric Acid, Acetic Acid, NaOH, KOH, Salt, Sugar, Water.

Polycoat 750D

Polycoat 750D

SYSTEM 550D Faster cure Higher Impact resistance Higher Elongation Higher Abrasion

resistance Low temperature curing Higher UV resistance

Primary Differences

EPOXY• Lower cost

 Some areas where Polycoat 750D was used: Coating for steel or other substrate

exposed to corrosion Liner for concrete tanks, ponds,

irrigation ditches, tunnels, barges Coating inside silos for containment

of coal, cement, chemicals.

Polycoat 750D

 Some areas where Polycoat 750D was used (cont):

Earthen containment lining used with or without geo-textile

Encapsulation material for asbestos, or other dry hazardous materials

Truck bed and under-carriage liner

Polycoat 750D

 Some areas where System 750D was used (cont): Roof coatings for metal decks Aircraft carrier decks, stairs, passageways Airport fueling valve pits Potting runway light fixtures on air strips Rapid Runway Repairs

Polycoat 750D

 Some areas where System 750D was used (cont): Highway and bridge overlays Lining of cement mixers, ready

mix trucks and chutes Sports Court and Skateboard

ramp surfaces Grouting for concrete floors etc

Polycoat 750D

 

Polycoat 750D

• Secondary Containment• Petrol tanks • Drilling platforms• Pipelines

• Most Important Uses

• Runway Repairs• Industrial plants

 

Polycoat 750D

• Storage tanks• Oilfield compressors• Chemical plants• Fuel storage facilities

High tensile strength and elongation plus resistance to a

wide range of chemicals.

Secondary ContainmentSecondary Containment

Polycoat 750D

Secondary ContainmentSecondary Containment

Polycoat 750D

Secondary ContainmentSecondary Containment

 

Polycoat 750D

Secondary ContainmentSecondary Containment

Polycoat 750D

FUEL TANKSFUEL TANKS

Before

 

Polycoat 750D

FUEL TANKSFUEL TANKS

After

 

Polycoat 750D

Adds corrosion and abrasion resistance to pipeline exterior. Can be used as a sacrificial coating to prevent

costly damage during transport and installation.

PipelinesPipelines

 

Polycoat 750D

Runway RepairRunway Repair

 

Polycoat 750D

Offers excellent protective coatings on polyurethane foam roofs. These reflective insulated roofing systems reduce heating and cooling costs. Fast cure allows for quick installation and wider application window.

RoofingRoofing

 

Polycoat 750D

RoofingRoofing

 

Polycoat 750D

RoofingRoofing

 

Polycoat 750D

The ability to outlast paint and protect against corrosion and concrete spalling are major

reasons it is being specified on bridges in more and more

jurisdictions.

BridgesBridges

 

Polycoat 750D

BridgesBridges

 

Polycoat 750D

Fast cure, rapid turnaround, corrosion resistance and

washable surface make it the preferred option for plant

maintenance.

Food Processing PlantsFood Processing Plants

 

Polycoat 750D

Food Processing PlantsFood Processing Plants

Before

 

Polycoat 750D

Food Processing PlantsFood Processing Plants

After

Polycoat 750D

Food Processing PlantsFood Processing Plants

 

Polycoat 750D

Spraying Machine

 

Polycoat 750D

Spraying Machine

Polycoat 750D

Spraying Machine

 

 

Polycoat 750D

Protecting the world