the avila bag2
TRANSCRIPT
-
7/28/2019 The Avila Bag2
1/17
The Avila BagPDF Pattern
BumbleBeeBliss
-
7/28/2019 The Avila Bag2
2/17
Materials yard main fabric
yard coordinating fabric
yard second coordination fabric (for ruffle)
1 yard medium weight fusible interfacing
(such as Pellon Shape-Flex SF101)
yard (or 2- 1 x 20 strips)heavy weight
interfacing (such as Pellon Peltex)
4- 1 inch grommets (such as Dritz plasticcurtain grommets)
1- 12 inch zipper
Double-sided tape (Such as Dritz WashAway
Wonder Tape)
The Avila bag is the perfect on the go purse! Swing across your shoulder as
you tackle your errands, meet a friend for coffee, or take a walk through the
park. A cell phone pocket plus another two section pocket help keep your
purse organized. A zipper top keeps all your valuables safely tucked inside.
Set aside your afternoon to craft this adorable bag you will use again and
again!
Skill level: Advanced Beginner- Intermediate
Visit our shop for more lovely bag designs and patterns!
www.bumblebeebliss.com
All rights reserved. For personal use only. Please contact Bumblebee Bliss for
questions on terms and conditions at [email protected]
NotesAll seam allowances are unless otherwise noted.
Please reference a website or book for additional information on sewing terms
and definitions.
This website has a list of sewing terms and definitions:
http://www.favecrafts.com/Sewing-Tips/Sewing-Dictionary#
When printing be sure to set the page scaling option to none. You can find
the page scaling option by clicking on the print button.
http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd14642http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd38132http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1002371http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1002371http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.bumblebeebliss.com/mailto:[email protected]?subject=Terms%20and%20Conditionshttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionaryhttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionaryhttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionaryhttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionaryhttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionaryhttp://www.favecrafts.com/Sewing-Tips/Sewing-Dictionarymailto:[email protected]?subject=Terms%20and%20Conditionshttp://www.bumblebeebliss.com/http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd315941http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1002371http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1002371http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd38132http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd38132http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd14642http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd14642http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=prd14642 -
7/28/2019 The Avila Bag2
3/17
Seam allowances are unless otherwise noted
Fuse the medium weight interfacing to the wrong side of each pattern
piece following the manufacturers instructions. The 3 x 21 strips for
the ruffle and one pocket panel do not have interfacing. Set the handle
and interfacing insert aside.
Transfer the two dots from the main pattern piece onto the main
exterior panels.
Cutting out Pattern Pieces1Cut out the main pattern piece from the last page of the pattern.
From the main fabric cut:
2 main panels on the fold
2 lining panels on the fold
From the coordinating fabric cut:
4 top bands 3 x 12
1 cell phone pocket 5 x 10
2 pocket panels on the fold
1 handle 4 x 44
From the second coordinating fabric cut:
2 strips 3 x 21
From the medium weight interfacing cut:
2 main panels on the fold
2 lining panels on the fold4 top bands 3 x 12
1 cell phone pocket 5 x 10
1 pocket panel on the fold
From the heavy weight interfacing cut:
2 handle insert 1 x 20
-
7/28/2019 The Avila Bag2
4/17
Seam allowances are unless otherwise noted
Sew a gathering stitch across the top of one
main exterior panel. Sew another gathering
stitch along the bottom between the two dots
(transferred in step 1).
Carefully gather the top of the main panel to
match the size of the top band (12 inches
long). Slightly gather along the bottom until
the gathered portion is around 8 long.
Sew the gathered top of the main panel to the
top band with right sides together. Press theseam allowance towards the top band.
Repeat step 2 with second main exterior panel
and top band.
Sewing the Exterior Body2
-
7/28/2019 The Avila Bag2
5/17
Seam allowances are unless otherwise noted
Use a pin or turning tool to turn the tube right
side out. Press the tube flat with the seam in
the middle.
Sew a gathering stitch in the middle of the
tube. Carefully pull threads to ruffle. (Or use a
ruffler attachment). Gather until you reach to
desired amount of ruffles or until the strip is
12.
Pin the ruffle strip onto the main exteriorpanel between the top band and the lower
main panel covering the seam line. Sew across
the center of the ruffle strip following your
previous stitching line.
Repeat step 3 with the second strip and main
panel.
Making the Ruffle Strip3
Take one 3 x 21 strip of fabric for the ruffle.
Fold in half lengthwise matching right sides
together. Sew a seam stitching the fabric
closed. This forms a tube.
-
7/28/2019 The Avila Bag2
6/17
Seam allowances are unless otherwise noted
Turn right side out and press. Topstitch across
the top edge of the panel.
Pin the pocket to the lining panel matching the
bottom edges. Baste ( seam) the pocket
onto the lining panel by stitching around the
edge of the pocket.
Fold lining panel in half matching the curved
edges and lightly press. Starting at the top of
the pocket, stitch a straight line down the
length of the pocket following the crease you
made. This divides the pocket into two
sections. (You can also draw a line using chalk
or disappearing fabric marker.)
Sewing the Pocket Panel4Take both pocket panel pieces and with right
sides together sew across the top of the
pocket panels.
(One of pocket panel is not interfaced. If you
wish for a sturdier pocket interface both
pocket panel pieces.)
-
7/28/2019 The Avila Bag2
7/17
Seam allowances are unless otherwise noted
Turn inside out through the hole in the
bottom. Press flat. Topstitch across the top of
the pocket.
Fold the pocket in half lengthwise. At the
bottom sew a seam along the fold stitching
a length of 3/4. This will make a pleat at the
bottom of the pocket.
Press the pleat flat. On the remaining lining
panel, place the top of the cell phone pocket 1down from the top of the panel and 3 in from
the right of the panel. Carefully pin the pocket
shaping into a rectangle, making sure to square
up the edges. If needed draw lines using chalk
or disappearing fabric marker. Sew down one
side, across the bottom and up the other side
securing the cell phone pocket to the lining
panel.
Sewing the Cell Phone Pocket5Take the cell phone pocket (5 x 10 ) and
fold in half with right sides together matching
the short edges. Sew ( seam) around thepocket, starting with one edge and leaving a 1
hole at the bottom. Carefully, clip the
corners to reduce bulk.
-
7/28/2019 The Avila Bag2
8/17
Seam allowances are unless otherwise noted
Topstitch across on the top band near the
seam.
Repeat with the remaining top band and lining
panel.
Sewing the Lining Panels6
Sew one of the top bands to the lining panel
with the cell phone pocket. Press the seam
allowance towards the top band.
-
7/28/2019 The Avila Bag2
9/17
Seam allowances are unless otherwise noted
Peel off the top side of the tape and center thezipper along the top edge of one main panel.
Be sure that the front of the zipper is facing
down.
Place another strip of double sided tape on
the top edge of the zipper back.
Peel the top side of the tape off. Place one
lining panel right side down matching the top
of the lining panel with the top edge of the
zipper back. This will create a sandwich with
the zipper between the main and the lining
panels.
Sewing the Zipper7On the right side of the zipper place a strip of
double sided tape the length of the zipper
close to one edge.
Note: Not all double sided tapes will work.
Pick a tape that can be sewn through and will
wash away, such as Dritz WashAway Wonder
Tape
-
7/28/2019 The Avila Bag2
10/17
Seam allowances are unless otherwise noted
Press the lining and main panels away from
the zipper. Place the lining and main panels
wrong sides together.
Carefully topstitch across the top of the panels
starting and stopping from each edge. Pin
before sewing to be sure the lining does not
slip while sewing.
Repeat step 7 with other main and lining
panels to sew onto the opposite side of the
zipper.
Sewing the Zipper cont.7
Stitch from the coils of the zipper along thetop edge of the panels.
-
7/28/2019 The Avila Bag2
11/17
Seam allowances are unless otherwise noted
Pin to be sure that the fabric does not slide;
we need the fabric to lie as flat as possible.
Carefully cut out the circles drawn, cutting
through both layers.
Cutting the Grommet Holes8
With your panels lying flat, measure and mark
2 in from each side of the top band and 1
down from the zipper. Repeat with all four
edges. Using your template, place the center
of the circle on the mark. Draw around the
circle in the template.
Note: A template may come with your
grommets. If you have no template, center
your grommet around the mark and draw acircle around the inside of the grommet.
When cutting out the circle cut just a bit bigger
than the circle you have drawn.
-
7/28/2019 The Avila Bag2
12/17
Seam allowances are unless otherwise noted
Sew two separate seams. Starting from just
below the zipper of the main panel stitchalong the edge following the curve and ending
just below the zipper on the opposite side.
Repeat for the lining panels leaving a 3-4 hole
at the bottom.
Clip the seam allowance along the curve, being
careful not to clip the stitching. Turn the bag
right side out through the hole in the lining.
Match the grommet holes made in step 8 so
the lining and main panels align. Insert
grommets according to manufacturers
instructions. (If using Dritz plastic curtain
grommets, simply snap together).
Sewing the Bag Together9
Turn the bag so that the main panels are right
sides together and the lining panels are right
sides together. Pin in place. Adjust the
gathers at the bottom of the main panels to
ensure the edges match.
-
7/28/2019 The Avila Bag2
13/17
Seam allowances are unless otherwise noted
Open and fold each long edge into the middle.
Press.
Take the two strips of Peltex and match the
short ends. Zigzag stitch along the matching
short ends to secure them together.
Insert the Peltex strip under one of the folded
edge. Center strip in the handle.
Sewing the Handles10
Take the 4 x 44 handle strip and fold in
half lengthwise with wrong sides together.
Iron along the folded edge.
10
-
7/28/2019 The Avila Bag2
14/17
Seam allowances are unless otherwise noted
Edgestitch down the open edge of the handle,
stitching it closed. This is easiest if the Peltex
side of the handle is facing up.
Edgestitch the opposite folded edge of the
handle.
Edgestitch across both short ends of the
handle.
Measure in from each end of the handle 5
and mark.
Sewing the Handles cont.10
Fold each short end of the handle down
and press. Fold in half lengthwise to match
the folded edges. Press.
10
-
7/28/2019 The Avila Bag2
15/17
Seam allowances are unless otherwise noted
Repeat to attach the other end of the handle
to the remaining pair of grommets, being
careful not to twist the handle.
Hand stitch the hole in the lining closed.
Place your finished adorable handbag over
your shoulder and stroll around town!
Attaching the Handles11
Loop one end of the handle through both
grommets on one side. Match the end the ofhandle with the mark made in step 10. Pin
and sew on top of the previous stitching line.
11
-
7/28/2019 The Avila Bag2
16/17
Top
Fold the pattern piece at this line for cutting the pocket panel
Placeo
nf
old
Lining Panel
Cut 2 from main fabric
Cut 2 from medium weight interfacing
For pocket panel fold at dashed line then:Cut 2 from coordinating fabric
Cut 1 from medium weight interfacing
This box
shouldmeasure
1 x 1
When printing be sure to set the pag
scaling option to none. You can find
the page scaling option by clicking o
the print button. Some edges of the
pattern may not be printed dependin
on your printer and print setup.
-
7/28/2019 The Avila Bag2
17/17
Main Exterior Panel
Cut 2 from main fabric
Cut 2 from medium weight interfacing
Top
Placeo
nt
hef
old
Place this dot on both sides ofthe panel piece. Gather
between these dots.
This box
shouldmeasure
1 x 1
When printing be sure to s
the page scaling option to no
You can find the page scaling
option by clicking on the print
button. Some edges of the patt
may not be printed depending o
your printer and print setup