tg1311 1312 1313nz(e) - telephonechy.comtelephonechy.com/image/data/product/pdf/panasonic...

This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company.

Please read these operating instructions before using the unit and save them for future reference.

of Contentsuction ......................................................... 2

Charge the batteries for about 7 hours before initial use.

Model shown is KX-TG1311.

Operating Instructions

Model No. KX-TG1311NZ

KX-TG1312NZ

KX-TG1313NZ

Digital Cordless Phone

TG1311_1312_1313NZ(e).book Tuesday, September 16, 2008 4:28 PM

TableIntrod
Preparation .......................................................... 5Making/Answering Calls ................................... 11Phonebook......................................................... 12Useful Telephone Settings ............................... 14Caller ID Service ................................................ 17Multi-unit Operation .......................................... 19Useful Information............................................. 20
PNQX1114ZA DC1008DQ0

In

2

Introd

PThImL

M

K

ories

lacement battery information.r comes attached to the handset.

Replacement battery information:nly with a nickel metal hydride (Ni-MH) type of

l requires 2 AAA (R03) batteries for every handset. ce, we recommend using Panasonic rechargeable . HHR-4MPT).

ries may have a different capacity from that of the

KX-TG1313 KX-TG1311 KX-TGA131 3

/Part numberQuantity

KX-TG1311

KX-TG1312

KX-TG1313

base unit/ 1 1 1

cord 1 1 1

atteries*1 2 4 62 1 2 3

— 1 2

charger/ — 1 2

3 4 5 6


L Replace batteries obattery. This modeFor best performanbatteries (Model No

L Replacement battesupplied batteries.

troductionuction

roduct informationank you for purchasing a Panasonic digital cordless phone.portant:The suffix (NZ) in the following model numbers will be omitted in these instructions: KX-TG1311NZ/KX-TG1312NZ/KX-TG1313NZ

odel composition

X-TG1311 series

Supplied access

*1 See page 2 for rep*2 The handset cove

L Model shown isKX-TG1313.

Model No.Base unit HandsetPart No. Part No. Quantity

KX-TG1311 KX-TG1311 KX-TGA131 1KX-TG1312 KX-TG1311 KX-TGA131 2

No. Accessory item

1 AC adaptor for PQLV207AL

2 Telephone line

3 Rechargeable b

4 Handset cover*

5 Charger

6 AC adaptor for PQLV209AL

1 2

Introduction

3

Im

GL

L

L

L

L

L Care should be taken that objects do not fall onto, and liquids are not

L

EL

be kept away from heat sources such as radiators, uld also not be placed in rooms where the than 5 °C or greater than 40 °C.

of electrical shock, do not expose this product to rain f moisture.t from power outlets if it emits smoke, an abnormal usual noise. These conditions can cause fire or firm that smoke has stopped emitting and contact an centre.(detergents, cleansers, etc.) onto the telephone line it to become wet at all. This may cause a fire. If the plug becomes wet, immediately pull it from the , and do not use. this product near automatically controlled devices

doors and fire alarms. Radio waves emitted from this such devices to malfunction resulting in an accident.ny dust, etc. from the AC adaptor/power plug by wer outlet, then wiping with a dry cloth. Accumulated

insulation defect from moisture, etc. resulting in a fire. power cord/plug. This may cause a short circuit, /or fire.ug with wet hands.used as the main disconnect device. Ensure that the d near the product and is easily accessible.

ing the battery(ies) noted on page 2. USE ONLY H batteries AAA (R03) size.

new batteries.he battery(ies) in a fire, as they may explode. Check nagement codes for special disposal instructions.


spilled into, the product. Do not subject this product to excessive smoke, dust, mechanical vibration or shock.Only the supplied handset can be used with the base unit. No other handsets can be registered or used.

nvironmentDo not use this product near water.

Battery cautionL We recommend us

rechargeable Ni-ML Do not mix old andL Do not dispose of t

with local waste ma

portant information

eneralUse only the AC adaptor supplied with this product, noted on page 2.Do not connect the AC adaptor to any AC outlet other than a standard 220–240 V AC outlet.This product is unable to make calls when:− the portable handset battery(ies) need recharging or have failed.− there is a power failure.− the key lock feature is turned on.− the call bar feature is turned on (only phone numbers stored in the unit

as emergency numbers can be called).Do not open the base unit, charger, or handset other than to replace the battery(ies).Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.88 GHz to 1.90 GHz, and the RF transmission power is 250 mW (max.).) Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

L This product shouldcookers, etc. It shotemperature is less

Warning:L To prevent the risk

or any other type oL Unplug this produc

smell, or makes unelectric shock. Conauthorised service

L Do not spill liquids cord plug, or allow telephone line cordtelephone wall jack

L Do not place or usesuch as automatic product may cause

L Regularly remove apulling it from the podust may cause an

L Do not damage theelectric shock, and

L Do not touch the plL The AC adaptor is

AC outlet is installe

In

4

L

L

L

L

GL

L

L

L

L This equipment shall not be set to make automatic calls to the Telecom

L

L

will respond to incoming ringing when connected to et.y not provide for the effective hand-over of a call to nected to the same line.permit for any item of terminal equipment indicates as accepted that the item complies with minimum

ection to its network. It indicates no endorsement of com, nor does it provide any sort of warranty. Above ssurance that any item will work correctly in all er item of Telepermitted equipment of a different

r does it imply that any product is compatible with all rk services.

conditions, this telephone may not operate. Please rate telephone, not dependent on local power, is ency use.

isposal, transfer, or returnore your private/confidential information. To protect entiality, we recommend that you erase the phonebook or caller list entries from the memory of, transfer, or return the product.


“111” Emergency Service.To minimise the possibility of lightning damage, when you know that a thunderstorm is coming, we recommend that you:− Unplug the telephone line cord from the phone socket.− Unplug the AC adaptor from the AC power outlet.The earpiece on the handset is magnetised and may retain small metallic objects.

troductionDo not open or mutilate the battery(ies). Released electrolyte from the battery(ies) is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.Exercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.Only use a compatible base unit (or charger) to charge the battery(ies). Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the battery(ies) to swell or explode.

eneral noticesThis equipment will be inoperable when mains power fails.When a failure occurs which results in the internal parts becoming accessible, disconnect the power supply cord immediately and return this unit to an authorised service centre.Disconnect the telecom connection before disconnecting the power connection prior to relocating the equipment, and reconnect the power first.No “111” or other calls can be made from this device during a mains power failure.

L Not all telephones the extension sock

L This equipment maanother device con

L The grant of a Teleonly that Telecom hconditions for connthe product by Teleall, it provides no arespects with anothmake or model, noof Telecom’s netwo

Important notice:L Under power failure

ensure that a sepaavailable for emerg

Notice for product dL This product can st

your privacy/confidinformation such asbefore you dispose

Preparation

5

InU

Ththco

mounted on the wall, if required.ied Panasonic AC adaptor PQLV207AL.ed telephone line cord. Using another telephone line the unit to work properly.

(220–240 V AC, 50/60 Hz)

Hooks

To single-line

telephone socket


formation on Disposal in other Countries outside the European nion

ese symbols are only valid in the European Union. If you wish to discard ese items, please contact your local authorities or dealer and ask for the rrect method of disposal.

Preparation

Connections

Base unitThe base unit can beL Use only the supplL Use only the suppli

cord may not allow

30 mm

Screws

(Not supplied)

P

6

C

ThL

NL

L

L

DThcoto

DSL/ADSL serviceADSL filter (contact your DSL/ADSL provider) to the n the base unit and the telephone line socket in the

:g conversations.o not function properly.

e and noise-free operation, place your base unit:l appliances such as TVs, radios, personal r phones.h, and central location.

AK

(2

To single-line

telephone socket

elephone line cord

DSL/ADSL filter


uring a power failuree unit will not work during a power failure. We recommend connecting a rded-type telephone (without AC adaptor) to the same telephone line or the same telephone line socket using a BT double adaptor.

reparation

harger

e charger can be mounted on the wall, if required.Use only the supplied Panasonic AC adaptor PQLV209AL.

ote:Never install telephone wiring during a lightning storm.Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.The unit is not designed to be used with rotary/pulse dialling services.

If you subscribe to aPlease attach a DSL/telephone line betweeevent of the following− noise is heard durin− Caller ID features d

LocationFor maximum distanc− away from electrica

computers, or othe− in a convenient, hig

vailable for:X-TG1312/KX-TG1313

20–240 V AC, 50/60 Hz)

Hooks25.2 mm

Screws

(Not supplied)

T

Preparation

7

BImL

L

L

In

power on/off

ut 1 second.

ut 2 seconds.

ge the base unit or charger for about 7 hours before

ttery performance (supplied batteries)

Battery level

HighL When flashing: Fully charged.

Medium

LowL When flashing: Needs charging.

Operating time

17 hours max.

150 hours max.


Panasonic Ni-MH ba

Operation

In continuous use

Not in use (standby)

attery installationportant:Use the supplied rechargeable batteries (Part No. HHR-55AAAB).When installing the batteries:− Wipe the battery ends (S, T) with a dry cloth.− Avoid touching the battery ends (S, T) or the unit contacts.− Confirm correct polarities (S, T).If the handset does not automatically turn on after installing batteries, press {ih} for about 1 second, or place the handset on the base unit or charger.

sert the batteries negative (T) end first. Close the handset cover.

Turning the

Power onPress {ih} for abo

Power offPress {ih} for abo

Battery charPlace the handset oninitial use.

Battery level

Battery icon

5

6

7

P

8

NL

L

L

L

A ReceiverB DisplayC {k} (Phonebook)D {C} (Talk)E Navigator

({e}/{v}/{>}/{<})? (Volume: {e}/{v})

F {R} (Redial/Pause)G {R} (Recall/Flash)H MicrophoneI {j/OK} (Menu/OK)J {ih} (Off/Power)K {C} (Clear)L {INT}

KX-TG1311:To stop pagingKX-TG1312/KX-TG1313:To stop paging/Intercom

M Charge contactsN Ringer

N

K

L

M

J

I


reparationote:It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.

Controls

Handset

A

B

C

D

E

F

G

H

Preparation

9

B

D

H

bers only

l bar is on. (page 15)

ct call is on. (page 15)

lock is on. (page 11)

ger volume is off. (page 14)

played when you press {#}.

S NO” is selected for standby mode display ge 14) and the current base unit number is 1, “-1-” isplayed.

S NO” is selected for standby mode display ge 14) and the current handset number is 2, “[2]” isplayed.

e been received, the display shows the number of new calls.

ning


*1 Voice mail subscri

k Making or answering a call

C Phonebook mode

l Setting mode

5 Battery level

0 New voice mail message received.*1 (page 18)

ase unit

isplay

andset display items

A Charge contactsB {x} (Locator)

Item Meaning

w

Within range of a base unitL When flashing: Out of range, no registration, or no

power on base unit

x Paging, intercom mode, or accessing base unit

B

A

Cal

Dire

Key

Rin

Dis

If “B(pais d

If “H(pais d

4 new callsWhen new calls hav

Item Mea

P

10

Sin

uage

NG HS” i {>}AY OPT” i {>}AGE” i {>}our desired language. i {>} i {ih}

age you cannot read: {ih} i {j/OK} i {v} times i {>} i {v} 2 times i {>} i ur desired language. i {>} i {ih}

e

NG BS” i {>} i {*}our and minute (24-hour time entry).istake, press {C}. Digits are cleared from the right.

.esate, month, and year.istake, press {C}. Digits are cleared from the right.

S

{

i

{


6 Enter the current dL If you make a m

7 {>} i {ih}

reparation

ymbols used in these operating structions

Display lang1 {j/OK}2 {v}/{e}: “SETTI3 {v}/{e}: “DISPL4 {v}/{e}: “LANGU5 {v}/{e}: Select yNote:L If you select a langui {>} i {v} 3{v}/{e}: Select yo

Date and tim1 {j/OK}2 {v}/{e}: “SETTI3 Enter the current hL If you make a m

4 {>} L A beep is heard

5 {>} i {*} 2 tim

ymbol Meaning

j/OK} Press {j/OK}.

Proceed to the next operation.

v}/{e}: “ ” Press {v} or {e} to select the words in quotations. Example: {v}/{e}: “OFF”

Making/Answering Calls

11

Makin

M12

A1

2

H12

AP

PAdi{R

(redialling/storing/editing before

}: Select the desired phone number.

}: “SAVE TEL NO” i {>} i {j/OK} i Enter aracters max.; page 12). i {j/OK}calling:e}: “EDIT CALL NO” i {>} i Edit the number.

e}: “CLEAR”/“ALL CLEAR” i {>} i” i {>} i {ih}

ocked so that no calls or settings can be made. answered, but all other functions are disabled while

out 2 seconds to turn key lock on/off.

numbers cannot be made until key lock is turned off.

the special features of your host PBX such as ion call, or accessing optional telephone services.

ll/flash time, see page 16.


ause (for PBX/long distance service users) pause is sometimes required when making calls using a PBX or long stance service. Pressing {R} 1 time creates a 3 second pause. Press } repeatedly to create longer pauses.

Recall/flash{R} allows you to usetransferring an extensNote:L To change the reca

g/Answering Calls

aking callsDial the phone number. i {C}When you finish talking, press {ih} or place the handset on the base unit or charger.

nswering callsPress {C} to answer the call.L You can also answer the call by pressing any dial key from {0} to {9}, {*}, or {#}. (Any key answer feature)

When you finish talking, press {ih} or place the handset on the base unit or charger.

andset locatorPress {x} on the base unit.To stop paging, press {x} on the base unit or press {C} or {INT} on the handset.

djusting the receiver volumeress {e} or {v} repeatedly while talking.

Redial functionscalling/erasing)1 {R} i {v}/{e2 ■ Redialling:

{C}

■ Storing:{>} i {v}/{ethe name (9 ch

■ Editing before {>} i {v}/{i {C}

■ Erasing:{>} i {v}/{{v}/{e}: “YES

Key lockThe handset can be lIncoming calls can bekey lock is on.Press {j/OK} for abNote:L Calls to emergency

12

FToyoThphtoIf sew12NL

es to the phonebooks you to make calls without having to dial manually. s and phone numbers.

hone number (24 digits max.). i {j/OK}ame (9 characters max.). i {j/OK}

ation is received and it matches a phone number phonebook, the stored name is displayed.

L To enter another character located on the same dial key, press {>} to the next space, then press the appropriate dial key.

mistake to move the cursor to the right of where you want to r/character. correct number/character.

Keys Characters, – / 1 {6} M N O 6

{7} P Q R S 7{8} T U V 8{9} W X Y Z 9{0} (Space) 0


move the cursor to

Editing/correcting a1 Press {<} or {>}

correct the numbe2 {C} i Enter the

Phonebook

or call waiting or Call Waiting Caller ID service users use call waiting, you must first subscribe to the call waiting service of ur service provider/telephone company.is feature allows you to receive calls while you are already talking on the one. If you receive a call while on the phone, you will hear a call waiting

ne.you subscribe to both Caller ID and Call Waiting with Caller ID rvices, the 2nd caller’s information is displayed after you hear the call

aiting tone on the handset.Press {R} to answer the 2nd call.To switch between calls, press {R}.

ote:Please contact your service provider/telephone company for details and availability of this service in your area.

Phonebook

Adding entriThe phonebook allowYou can add 50 name1 {j/OK} 2 times2 Enter the party’s p3 Enter the party’s n4 {ih}

Note:L When caller inform

stored in the unit’s

Character table

Note:

Keys Characters{1} # [ ] *

{2} A B C 2{3} D E F 3{4} G H I 4{5} J K L 5

Phonebook

13

M12

ialling (Hot key)

in the phonebook to a one touch dial keyn each be used as a one touch dial key, allowing you the phonebook by simply pressing a dial key.}: Select the desired entry. i {j/OK}EY REG” i {>}he desired dial key. i {>} already assigned as a one touch dial key, the er flashes.

{>} i {ih}

ling a one touch dial assignment desired one touch dial key ({1} to {9}).

e touch dial assignment: {v}/{e}: “YES” i {>} i {ih}


aking calls/editing/erasing{k} i {v}/{e}: Select the desired entry.■ Making calls:{C}

■ Editing:{>} i {v}/{e}: “EDIT” i {>} i Edit the phone number. i {j/OK} i Edit the name. i {j/OK}

■ Erasing:{>} i {v}/{e}: “CLEAR” i {>} i {v}/{e}: “YES” i {>} i {ih}

One touch d

Assigning an entry Dial keys {1} to {9} cato dial a number from1 {k} i {v}/{e2 {v}/{e}: “HOT K3 {v}/{e}: Select tL If the dial key is

displayed numb4 {v}/{e}: “YES” i

Making calls/cancel1 Press and hold the2 ■ Making calls:

{C}

■ Cancelling a on{>} 2 times i

U

14

Usefu

GTo123

45

NL

ody for the external ringer tone, the ringer continues melody finishes even when another person answers er phone connected to the same line. If you want the

inging at the same time, select ringer tone number 1.llows you to answer calls simply by lifting the handset r charger. You do not need to press {C}. If you er ID service and want to view the caller’s information handset to answer a call, turn off this feature.

An alarm sounds at the set time for 3 minutes.

e beforehand (page 10).

NG HS” i {>}ALARM” i {>}IME” i {>}

PAGING <RING TYPE 1> —

STANDBY MODE <CLOCK> —

TALK MODE <TALK TIME> —

LANGUAGE <ENGLISH> 10

CALL BAR <OFF> 15

DIRECT NO 15

SET DIRECT <OFF> —

HSPIN CHANGE <0000> 15

AUTO TALK*2 <OFF> —

— 15

Sub-menu Page


Important:L Set the date and tim1 {j/OK}2 {v}/{e}: “SETTI3 {v}/{e}: “TIME 4 {v}/{e}: “SET T

ALARM <RING TYPE 1> —

TONE OPT KEY TONE <ON> —

CALL WAITING <ON> —

RANGE ALARM <OFF> —

BATTERY LOW <ON> —

seful Telephone Settingsl Telephone Settings

uide to handset settings customise the handset (general approach):{j/OK}Press {v} or {e} to select “SETTING HS”. i {>}Press {v} or {e} to select the desired item in the handset settings menu. i {>}Press {v} or {e} to select the desired item in the sub-menu. i {>}Press {v} or {e} to select the desired setting. i {>}L This step may vary depending on the feature being programmed.L To exit the operation, press {ih}.

ote:In the following table, < > indicates the default settings.

*1 If you select a melto sound until the the call using anothhandsets to stop r

*2 Auto talk feature aoff the base unit osubscribe to a Callafter lifting up the

Alarm

Menu Sub-menu Page

TIME ALARM SET TIME 14

SET ALARM <OFF> —

RINGER OPT RINGER VOL <level 6> —

EXT RINGER*1 <RING TYPE 1> —

INT RINGER <RING TYPE 1> —

DISPLAY OPT

CALL OPT

OTHER OPT

RESET HS

Menu

Useful Telephone Settings

15

56

CCtunu12345

6

DDpr123456NL

ndset PINset PIN must be entered when changing certain the PIN, please write down your new PIN as the unit

u again.

NG HS” i {>} OPT” i {>} CHANGE” i {>}-digit handset PIN.r PIN, contact your nearest Panasonic service centre.igit handset PIN.igit handset PIN again. i {ih}

ndset

NG HS” i {>} HS” i {>} (default: “0000”).r PIN, contact your nearest Panasonic service centre.

{>} i {ih}


{v}/{e}: “DIRECT NO” i {>}Enter a phone number (24 digits max.). i {j/OK} 2 times{v}/{e}: “ON” i {>} i {ih}

ote:When this feature is turned on, only the direct call number can be called.

Enter the desired hour and minute (24 hour time entry). i {>}{v}/{e}: Select the desired setting. i {>} i {ih}

all barall bar feature prohibits outside calls from being made. When call bar is rned on, only emergency calls can be made. To store emergency mbers, see page 16.{j/OK}{v}/{e}: “SETTING HS” i {>}{v}/{e}: “CALL OPT” i {>}{v}/{e}: “CALL BAR” i {>}Enter handset PIN (default: “0000”). L If you forget your PIN, contact your nearest Panasonic service centre.{v}/{e}: Select the desired setting. i {>} i {ih}

irect callirect call feature allows you to dial a preset phone number simply by essing {C}. No dialling is necessary.{j/OK}{v}/{e}: “SETTING HS” i {>}{v}/{e}: “CALL OPT” i {>}

Changing the haFor security, the handsettings. If you changewill not reveal it to yo1 {j/OK}2 {v}/{e}: “SETTI3 {v}/{e}: “OTHER4 {v}/{e}: “HSPIN5 Enter the current 4L If you forget you

6 Enter the new 4-d7 Enter the new 4-d

Resetting the ha1 {j/OK}2 {v}/{e}: “SETTI3 {v}/{e}: “RESET4 Enter handset PINL If you forget you

5 {v}/{e}: “YES” i

U

16

GTo12

3

− Enter the new 4-digit base unit PIN again.

estriction*5

tting call restrictionnter base unit PIN (default: “0000”).*2 i Enter

he desired handset number by pressing the ppropriate dial key.The selected handset number flashes on the display.>} nter the phone number to be restricted (8 digits ax.).To select a different memory location, press {>} and enter a number. >}

rning on/off call restrictionnter base unit PIN (default: “0000”).*2

Handset number is displayed. A flashing number indicates call restriction is on; a non-flashing number indicates call restriction is off.

nter the desired handset number by pressing the ppropriate dial key to turn on/off. i {>} 2 times

gency number (“111”, “911”, “999”)*6

ter base unit PIN (default: “0000”).*2 i {*}■ Storing:

− Enter the emergency number (8 digits max.).L To select a different memory location, press {>} and enter a number.

− {>}diting:

Press {>} to display the desired number. i {C} i Enter the new emergency number. i {>}

re (default setting)


■ E

seful Telephone Settings

uide to base unit settings customise the base unit (general approach):{j/OK}Press {v} or {e} to select “SETTING BS”. i {>}L “INPUT CODE” is displayed.Enter the desired code number. Follow the instructions in the “Feature” column of the chart.L To exit the operation, press {ih}.

Code No. Feature (default setting)

{0} Reset base unit to its default settings.*1

− Enter base unit PIN (default: “0000”).*2 i {>}

{3} Recall/flash time (600 ms)*3

− Enter base unit PIN (default: “0000”).*2 i {2} i {1}

− Select the desired setting by pressing {1} for 100 ms or {2} for 600 ms. i {>}

{5} Change base unit PIN (“0000”).*4

− Enter the current 4-digit base unit PIN.*2

− Enter the new 4-digit base unit PIN.

{6} Call r■ Se

− EtaL

− {− E

mL

− {■ Tu

− EL

− Ea

Emer− En

Code No. Featu

Caller ID Service

17

*1*2*3

*4

*5

*6

ID service

D compatible. To use Caller ID features, you must r ID service. Contact your service provider/telephone .

tional incoming calls, your display will show the area ckland) or the cellular prefix (e.g. 0274 for Telecom

y the caller’s telephone number. An Auckland caller’s layed as 09XXXXXXX. The seven X’s represent the caller’s telephone number. A caller from a 6-digit umber will be displayed as 0274XXXXXX. For nal calls, your display may only show “0000”. For a Centrex line, your display will show Centrex in the shorter extension number format used within

ation will not be presented on incoming fax calls if is used.

rom Telecom or another companyany may charge you for a local call if the number ode prefix included. If this is unacceptable, dial only er. Do not dial the {0} prefix or the area code.


Only the emergency number setting is not reset.If you forget your PIN, contact your nearest Panasonic service centre.The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.If you change the PIN, please write down your new PIN as the unit will not reveal it to you again.Call restriction feature restricts the handset from dialling certain phone numbers. You can assign up to 10 phone numbers (memory locations 0–9) to be restricted.Emergency number feature determines which phone numbers may be dialled while the call bar feature is turned on. A total of 4 emergency numbers (memory locations 1–4) can be stored.The default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers.

Caller ID Service

Using CallerImportant:L This unit is Caller I

subscribe to a Callecompany for details

L For all local and nacode (e.g. 09 for AuCellular) followed bnumber will be dispseven digits of the Telecom Cellular nincoming internatiobusiness users on extension numbersyour company.

L The Caller ID informTelecom FaxAbility

Using toll services fYour telephone compdialled has the area cthe 7-digit local numb

{*} Date and time: page 10

Code No. Feature (default setting)

C

18

C

DL

L

*1PL

−

−

S12

phone number, which is sent to your telephone from one exchange, includes “0” and an area code prefix.

“0” and the area code prefix can be omitted.T CALL NO” i {>} i Press {<} or {>} to move right of where you want to edit the number. i Edit

ber. i {C}

AR”/“ALL CLEAR” i {>} i {v}/{e}: “YES” i }

ervicer or Message Mailbox messages, please note the

ssage Mailbox” are automatic answering services e provider/telephone company. After you subscribe to ice provider/telephone company’s Voice Mail system ou when you are unavailable to answer the phone or y. Messages are recorded by your service provider/ot your telephone. Your service provider/telephone

tter” dial tone (special dial tone) to indicate that you When you have new messages, 0 will be set. Please contact your service provider/telephone f this service.

Important: on the display even after you have listened to new ff by pressing {<} for 1 second.


toring/editing/erasing{v}/{e}: Select the desired entry. i {>}■ Storing:{v}/{e}: “SAVE TEL NO” i {>} i {j/OK} i Enter the party’s name (9 characters max.; page 12). i {j/OK} i {ih}

L If 0 still remainsmessages, turn it o

aller ID Service

aller ID features

isplay indicationsWhen new calls have been received, the display shows the number of new calls.Example: 4 new calls have been received.

Phone numbers of the last 50 different callers are logged in the caller list.Example:

Shown when this call has already been viewed or answered.ress {C} to call back.If the unit cannot receive caller information, the following is displayed:“OUT OF AREA”: The caller dials from an area which does not provide a Caller ID service.“PRIVATE”: The caller requests not to send caller information.

■ Editing:The caller’s teleyour local telephFor local calls, {v}/{e}: “EDIthe cursor to thethe phone num

■ Erasing:{v}/{e}: “CLE{>} i {ih

Voice mail sTo receive Call Mindefollowing:“Call Minder” and “Meoffered by your servicthis service, your servwill answer calls for ywhen your line is bustelephone company, ncompany uses a “Stuhave new messages.displayed on the handcompany for details o

*1

Multi-unit Operation

19

Multi-

In

InE1

2

3

calls, conference calls

ransferred between 2 handsets. 2 handsets can have an outside party.

dset 1 transfers a call to handset 2

call, press {INT}. i Press {2} (desired handset

is put on hold.swer, press {INT} to return to the outside call.

wer the page.alk with handset 1.

all transfer, press {ih}.ference call, press {3}.

ithout speaking to the other handset usercall, press {INT}. i Enter the desired handset

Lk flashes to indicate the outside call is on hold.

rings at the other handset.

user does not answer the call within 30 seconds, the ndset again.

AK 313


2 {ih}

L The outside callNote:L If the other handset

call rings at your ha

unit Operation

tercom

tercom calls can be made between handsets.xample: When handset 1 calls handset 2

Handset 1:{INT} i Press {2} (desired handset number).Handset 2:{C}

When you finish talking, press {ih}.

Transferring

Outside calls can be ta conference call withExample: When han1 Handset 1:

During an outside number).L The outside callL If there is no an

2 Handset 2:Press {C} to ansL Handset 2 can t

3 Handset 1:To complete the cTo establish a con

Transferring a call w1 During an outside

number.

vailable for:X-TG1312/KX-TG1313

Available for:KX-TG1312/KX-TG1

U

20

Usefu

TIf dire

ceive L The base unit’s AC adaptor or telephone line cord is not connected. Check the connections.

L If you are using a BT double adaptor to connect the unit, remove the adaptor and connect the unit to the phone wall socket directly. If the unit operates properly, check or replace the adaptor.

L The call bar feature is turned on. Turn it off (page 15).

L You dialled a call restricted number (page 16).

L The key lock feature is turned on. Turn it off (page 11).

L The unit is not designed to be used withrotary/pulse dialling services.

ng. L The ringer volume is turned off. Adjust the ringer volume (page 14).

is L The handset is not turned on. Turn the power on (page 7).

t turn L Make sure that the batteries are installed correctly (page 7).

L Fully charge the batteries (page 7).

a ead.

L Change the display language (page 10).

d ed.

L The handset is too far from the base unit. Move closer and try again.

Cause/solution


I have changed the display language tolanguage I cannot rA busy tone is hearwhen {C} is press

seful Informationl Information

roubleshootingyou still have difficulties after following the instructions in this section, sconnect the base unit’s AC adaptor and turn off the handset, then connect the base unit’s AC adaptor and turn on the handset.

Problem Cause/solutionw is flashing. L The handset is too far from the base

unit. Move closer.L The base unit’s AC adaptor is not

connected. Check the connections (page 5).

L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference.

L The handset registration is cancelled. Register the handset to the base unit (page 22).

I cannot make or recalls.

The unit does not ri

The handset displayblank.The handset will noon.

Problem

Useful Information

21

not L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details.

L If your unit is connected to any additional telephone equipment, remove and plug the unit directly into the wall jack.

L If you use a DSL/ADSL (JetStream) service, we recommend that you contact your DSL/ADSL service provider to have a DSL/ADSL Splitter installed. We do not recommend the use of generic DSL/ADSL filters. Contact your DSL/ADSL service provider for details.

L Other telephone equipment such as a monitored Burglar Alarm or the modem in the SKY Digital decoder may be interfering with this unit. Disconnect the other equipment and try again.

slow L Depending on your service provider/telephone company, the unit may display the caller’s information at 2nd ring or later.

L Move closer to the base unit.

Cause/solution


Noise is heard, sound cuts in and out.

L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference.

L Move closer to the base unit.L If you use a DSL/ADSL (JetStream)

service, we recommend that you contact your DSL/ADSL service provider to have a DSL/ADSL Splitter installed. We do not recommend the use of generic DSL/ADSL filters. Contact your DSL/ADSL service provider for details.

I fully charged the batteries, but 7 still flashes.

L Clean the charge contacts and charge again (page 7).

L It is time to replace the batteries (page 7).

I fully charged the batteries, but the operating time seems to be shorter.

L Clean the battery ends (S, T) and the charge contacts with a dry cloth, and charge again.

Problem Cause/solutionCaller information isdisplayed.

Caller information isto display.

Problem

U

22

Li

CL

R12345 Press and hold {x} on the base unit for about 5 seconds.

67

r PIN, contact your nearest Panasonic service centre.et has been registered successfully, w stops

ing, start again from step 1.

sls: 120 Duplex Channels1.88 GHz to 1.90 GHz:on Multiple Access)1,728 kHz/s

requency Shift Keying)ower:erage power per channel)CM 32 kbit/s

0–240 V AC, 50/60 Hzon:

.2 W 3.9 W

Charger :.6 W 3.6 Wons:80 % relative air humidity (dry)


L If all registered handsets start ringing, press {x} to stop, then start again from step 1.

L The rest of the procedure must be completed within 4 minutes.{v}/{e}: Select a base unit number. i {>}Wait until “BS PIN” is displayed. i Enter the base unit PIN (default: “0000”). i {>}

Standby: Approx. 0Maximum: Approx.

■ Operating conditi5 °C–40 °C, 20 %–

seful Information

quid damage

aution:To avoid permanent damage, do not use a microwave oven to speed up the drying process.

egistering the handset to the base unit{j/OK}{v}/{e}: “SETTING HS” i {>}{v}/{e}: “REGISTRATION” i {>}{v}/{e}: “REGISTER HS” i {>}

L If you forget youL When the hands

flashing.L If w is still flash

Specification■ Number of channe■ Frequency range:■ Duplex procedure

TDMA (Time Divisi■ Channel spacing:■ Bit rate: 1,152 kbit■ Modulation:

GFSK (Gaussian F■ RF transmission p

Approx. 10 mW (av■ Voice coding: ADP■ Power source: 22■ Power consumpti

Base unit:Standby: Approx. 1Maximum: Approx.

*1

Problem Cause/solutionLiquid or other form of moisture has entered the handset/base unit.

L Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact your nearest Panasonic service centre.

Useful Information

23

■

■

*1

NL

L


Dimensions:Base unit: Approx. 85 mm × 101 mm × 64 mmHandset: Approx. 148 mm × 50 mm × 33 mmCharger*1: Approx. 83 mm × 75 mm × 63 mm

Mass (weight):Base unit: Approx. 110 gHandset: Approx. 120 gCharger*1: Approx. 70 g

KX-TG1312/KX-TG1313

ote:Design and specifications are subject to change without notice.The illustration in these instructions may vary slightly from the actual product.

For your future referenceWe recommend keeping a record of the following information to assist with any repair under warranty.

Sales Department:Panasonic New Zealand Ltd.350 Te Irirangi Drive, East Tamaki, Private Bag 14911 Panmure, Auckland,New Zealand

Panasonic Communications Co., Ltd.1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., may be reproduced for internal use only. All other reproduction, in whoin part, is prohibited without the written consent of Panasonic Communications Co., Ltd.

© Panasonic Communications Co., Ltd. 2008

Serial No. Date of purchase(found on the bottom of the base unit)Name and address of dealer

Attach your purchase receipt here.

Customer Support Centre Tel. No.:(09) 272 0178 or website www.panasonic.co.nz


and le or

tg1311 1312 1313nz(e) - telephonechy.comtelephonechy.com/image/data/product/pdf/panasonic...

Documents