textiles catalogueintertex.ca/.../10/intertextextilesinctextilescatalogue1.pdfintertex textiles inc....

Intertex Textiles Inc.

1200 Speers Road Unit 2

Oakville, Ontario, Canada

L6L 2X4

Textiles Catalogue

Phone: (905)842-7627

Fax: (905)842-7704

E-mail: [email protected]

W: www.intertex.ca

1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4

Phone: (905) 842-7627 Web: www.intertex.ca

Fax: (905) 842-7704 E-mail: [email protected]




G09P77- -31

9 oz. Premium Fibreglass Fabric

SPECIFICATIONS

BASE FABRIC Fibreglass

COLOUR / APPEARANCE Tan, Heat Treated, Red Available

AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)

ROLL LENGTH, yards 50 (45.7m)

WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 8.5. (288 gm/sq.m)

FABRIC THICKNESS, inches 0.020 (0.50mm)

WARP STRENGTH, lbs/in. 100.0 (45.4 Kg/2.54cm)

FILL STRENGTH, lbs/in. 40.0 (18.2 Kg/2.54cm)

ABRASION RESISTANCE Low

TEMPERATURE TOLERANCE To 1000˚F (540˚C)

CHEMICAL RESISTANCE Excellent except Hydrofluoric and hot Phosphoric acid and wet

Hydrogen Chloride

SOLVENT RESISTANCE Excellent

SUNLIGHT & AGE RESISTANCE Excellent

ELECTRICAL PROPERTIES High dielectric strength, low constants

AVAILABLE FINISHES

FINISH NUMBER 31 Heat Treated, Red available, See Fabric Finish Options data

sheet

CERTIFICATIONS MIL-C-20079 MIL-I-24244

US Coast Guard 164.009

NRC 1.36

STYLE: G09P77- -31

An AMATEX woven thermoglass light weight fabric which has been heat treated to a

natural tan shade. Applications include lagging cloth, marine and industrial use, light

weight curtain materials. Resistant to most chemicals, offers good thermal protection to

temperatures up to 1000˚F (540˚C).




G19P33- -31

19 oz. Premium Fibreglass Fabric

STYLE: G19P33- -31

An AMATEX woven thermoglass fabric which has been heat treated to a natural tan

shade, or dyed red. Applications include welding protection, curtain materials, and

insulation fabric. Resistant to most chemicals, offers good thermal protection to


SPECIFICATIONS

BASE FABRIC 100% Fibreglass

COLOUR / APPEARANCE Tan Heat Treated or Red

AVAILABLE WIDTHS, inches 30”, 40”, 60”, 72” (0.75m, 1.0m, 1.5m, 1.8m)


WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 17.7 +/- 10% (602 gm/sq. m)


WARP STRENGTH, lbs/in. 200.0 (90 Kg/2.54cm)

FILL STRENGTH, lbs/in. 100.0 (45.5 Kg/2.54cm)

ABRASION RESISTANCE Medium

TEMPERATURE TOLERANCE To 1000˚F (540˚C)


Hydrogen Chloride



ELECTRICAL PROPERTIES High Dielectric strength, low constants

AVAILABLE FINISHES

FINISH NUMBER 31 Heat Treated, 42 PVC Binder, Red Available, see Fabric Finish

Options data sheet

CERTIFICATIONS MIL-C-20079 MIL-I-24244

US Coast Guard 164.009

NRC 1.36




G19P33- -31AL3

STYLE: G19P33- -31AL3

An AMATEX woven thermoglass fabric, plain weave, heat treated with aluminum foil on

on side. Applications include protective curtains, lagging cloth, vapor and flange spray

shields, and heat reflection. Resistant to most chemicals, offers good thermal protection

to temperature up to 1000˚F (540˚C).

Aluminized Premium Quality

19oz. Fibreglass cloth

SPECIFICATIONS


COLOUR / APPEARANCE Aluminum foil one side, tan reverse side

AVAILABLE WIDTHS, inches 48”, 58”, 60” (1.22m, 1.47m, 1.52m)


WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 20.5 (697 gm/sq. m)


WARP STRENGTH, lbs/in. 200.0 (90.9 Kg/ 2.54cm)

FILL STRENGTH, lbs/in. 100.0 (45,4 Kg/ 2.54cm)


TEMPERATURE TOLERANCE

Base fabric to 1000˚F (540˚C)

Acrylic Adhesive to 325˚F (163˚C)

Aluminum foil to 1000˚F (540˚C)

Coating Certifications 1 Mil Aluminum Foil


Hydrogen Chloride



AVAILABLE FINISHES

FINISH NUMBER




G24PBB- -00

STYLE: G24PBB- -00

An AMATEX woven roving thermoglass fabric of a medium weight in a plain weave.

Applications include all general industrial uses which do not require rigid specifications.

Resistant to most chemicals, offers thermal protection for temperatures up to 1000˚F

(540˚C).

24 oz. Industrial Quality Fibreglass Fabric

SPECIFICATIONS


COLOUR / APPEARANCE White or Orange



WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 24 (814 gm/sq.m)

FABRIC THICKNESS, inches 0.036 (+/-.005”) (1.19m)

WARP STRENGTH, lbs/in. 225 (102 Kg/2.54 cm)

FILL STRENGTH, lbs/in. 200 (91 Kg/2.54 cm)

ABRASION RESISTANCE Good

TEMPERATURE TOLERANCE To 1000˚F (540˚C), Higher for brief periods

CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and

wet Hydrogen Chloride



ELECTRICAL PROPERTIES High Dielectric strength/ low constants

AVAILABLE FINISHES

FINISH NUMBER See Fabric Options data sheet




G30PAB- -7B

STYLE: G30PAB- -7B

An AMATEX woven roving thermoglass fabric of a heavier weight in a plain weave

coated with blue Vertex. Applications include all general industrial uses as well as

welding and stress relief blankets and drop cloths. Resistant to most chemicals, offers

thermal protection up to 1600˚F (870˚C)

30 oz. Industrial Quality

Blue Vertex Fibreglass Cloth

SPECIFICATIONS


COLOUR / APPEARANCE Blue



WEAVE STYLE Plain


FABRIC THICKNESS, inches 0.048 (+/-.005”) (1.22m)


FILL STRENGTH, lbs/in. 150.0 (68 Kg/2.54cm)







ELECTRICAL PROPERTIES High Dielectric strength/ low constants

AVAILABLE FINISHES

FINISH NUMBER 7B, Vertex Blue, See Fabric Options data sheet

*Temperature Tolerance established only as a benchmark of

fabric to a propane torch flame test exposing the fabric to 2000°

F during which hole(s) do not form in the cloth. At this

temperature the fibreglass fabric does, however, brittle.




PADMASTER 20

STYLE: PADMASTER 20

An AMATEX woven thermoglass fabric of medium weight with special vertex treatment

to a tan colour. Applications include pad fabrics, flange and valve covers, weld curtain

materials, and insulation fabrics. Resistant to most chemicals, offers excellent heat and

flame protection to temperatures up to 1200˚F (650˚C)

SPECIFICATIONS


COLOUR / APPEARANCE Tan



WEAVE STYLE Plain



WARP STRENGTH, lbs/in. 3000 (136 Kg/2.54cm)



TEMPERATURE TOLERANCE To 1200˚F (650˚C) Higher for very brief periods









PADMASTER 34

STYLE: PADMASTER 34

An AMATEX woven thermoglass heavier weight plain fabric with special vertex treatment

to a tan colour. Applications include hot side insulation fabric, flange and valve covers,

weld curtains, stress relief blankets and drop cloths. Resistant to most chemicals, offers

good heat and flame protection to 1200˚F (650˚C).

34 oz. Fibreglass Insulation Pad Fabric

SPECIFICATIONS



AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1/5m)


WEAVE STYLE Plain



WARP STRENGTH, lbs/in. 300.0 (136Kg/2.54cm)



TEMPERATURE TOLERANCE Up to 1200˚F (650˚C)








G32PAA- -00

STYLE: G32PAA- -00

An AMATEX woven thermoglass roving medium weight fabric. Applications include fire

blankets, gasket cloth, welding drop cloth, divider curtains. Resistant to light welding

sparks, splatter, splash, good for reflective heat uses.

32oz. Plain Fibreglass Welding Fabric

SPECIFICATIONS


COLOUR / APPEARANCE White



WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 32 (1087 gm/sq.m) (Average w/ laminate)

FABRIC THICKNESS, inches 0.044 (1.11 mm)


FILL STRENGTH, lbs/in. 200 (91 Kg/2.54cm)


TEMPERATURE TOLERANCE To 1000˚F (540˚C), higher for very brief periods



SOLVENT RESISTANCE Very Good

SUNLIGHT & AGE RESISTANCE Very Good





G40PAE

STYLE: G40PAE

An AMATEX woven roving thermoglass fabric of a heavy weight in a plain weave.

Applications include all general industrials uses such as blankets, covers and protective

curtains. Resistant to most chemicals, offers thermal protection for temperatures up to

1000˚F (540˚C)

SPECIFICATIONS


COLOUR / APPEARANCE White



WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 40 (1359 g,/sq.m)















G17SIL

STYLE: G17SIL-60

An AMATEX woven fibreglass base fabric impregnated with a high quality silicone.

Finish offers a smooth, slick surface providing for efficient processing in cut and sew

operations. Also used for weather protection. This product is designed for cut & sew

fabrication of high temperature (500˚F / 260˚C) removable pads and covers.

17 oz. Industrial Silicone Impregnated

Fibreglass Cloth

SPECIFICATIONS


COLOUR / APPEARANCE Silver/grey or Red

AVAILABLE WIDTHS, inches 60” (1.5m)


WEAVE STYLE Satin Weave


FABRIC THICKNESS, inches 0.017 (+/-.005”) (0.43mm)


FILL STRENGTH, lbs/in. 300 (136Kg/2.54cm)



-65 ˚F to 500˚F Continuous

700˚F Intermediate

Base Fabric 1000˚F

Passes NFPA 701 Certification Available

BASE FABRIC CERTIFICATIONS MIL-Y-1140 at additional cost

MIL-I-24244 at additional cost

COATING CERTIFICATIONS MIL-PRF-20696f, section 4.4 testing at additional cost

OIL & HYDROCARBON CERTIFICATION MIL-C-20696f, section 4.4 at additional cost

SOLVENT RESISTANCE n/a


ELECTRICAL PROPERTIES n/a

AVAILABLE FINISHES Silver/Grey or Red cured silicone rubber, other colours available

CERTIFICATIONS NFPA 701, ANSI/FM 4950 for curtain




G32SIL

STYLE: G32SIL

An AMATEX heavier weight woven fibreglass base fabric impregnated with a high quality

silicone. Applications include equipment and personnel heat shields, splash curtains,

and pipe or duct wrap. Resistant to most chemicals and solvents, weld splatter and light

metal splash.

32 oz. Industrial Silicone Impregnated

Fibreglass Cloth

SPECIFICATIONS


COLOUR / APPEARANCE Silver/grey or Red, both sides


ROLL LENGTH, yards 25 & 50 (22.8m, 45.7m)

WEAVE STYLE Satin, 8 harness





ABRASION RESISTANCE Very Good


-65 ˚F to 450˚F Continuous

Base Fabric 1000˚F continuous

Passes NFPA 701 Certification Available

BASE FABRIC CERTIFICATIONS MIL-Y-1140, MIL-I-24244

COATING CERTIFICATIONS MIL-I-24244, ASTM E162; ASTM E84.84a, MIL-C-24567 (SH);

NSN 8305-01-035-1057

OIL & HYDROCARBON CERTIFICATION MIL-C-20696f, section 4.4

SOLVENT RESISTANCE Oil & Hydraulic fluid resistance



AVAILABLE FINISHES Silver/Grey or Red cured silicone rubber, other colours available





HTX-600-9N

STYLE: HTX-600-9N

An AMATEX woven continuous filament amorphous silica fabric featuring a proprietary

tan coating. Applications include pad fabrics, valve covers, expansion joints, special

curtain materials and damage control cloth. Resistant to most chemicals, offers good

thermal protection to temperatures up to 1800˚F (990˚C) continuous.

Medium Weight Silica Cloth

SPECIFICATIONS

BASE FABRIC Silica


AVAILABLE WIDTHS, inches 36” (0.914m), 60” also available



FABRIC WEIGHT, oz/sq. yd. 18





TEMPERATURE TOLERANCE 1800˚F (990˚C), 3000˚F melt temp (1649˚C)

CHEMICAL RESISTANCE Excellent



ELECTRICAL PROPERTIES High dielectric, low constants

FINISH 9N Tan





HTX-1000-9N

STYLE: HTX-1000-9N

A woven continuous amorphous silica fabric featuring a proprietary tan coating.

Applications include pad fabrics, valve and generator covers, curtain materials, and

damage control cloth. Resistant to most chemicals, offers good thermal protection to


33 oz. Silica Cloth

SPECIFICATIONS

BASE FABRIC Silica


AVAILABLE WIDTHS, inches 36” (0.914m) 60” also available


WEAVE STYLE Satin. 12 harness

FABRIC WEIGHT, oz/sq. yd. 33




ABRASION RESISTANCE Excellent

TEMPERATURE TOLERANCE 1800°F continuous (990°C) 3000°F melt temp. (1649°C);





FINISH NUMBER 9N Tan





HTX-1000-8N-AL7

STYLE: HTX-1000-8N-AL7

A woven continuous filament silica fabric featuring a proprietary tan coating & aluminized

one side. Applications include pad fabrics, valve and generator covers, curtain

materials, and damage control cloth. Resistant to most chemicals, offers good thermal

protection to temperatures over 2000˚F

38 oz. Aluminized Silica Cloth

SPECIFICATIONS

BASE FABRIC Silica

COLOUR / APPEARANCE Aluminized one side, tan reverse




FABRIC WEIGHT, oz/sq. yd. 38oz.


WARP STRENGTH, lbs/in. 430.00 (195 Kg/2.54m)


ABRASION RESISTANCE N/A

TEMPERATURE TOLERANCE 1800°F continuous (990°C) 3000°F melt temp. (1649°C)

BASE FABRIC CERTIFICATIONS Higher than 95% Silica (SiO₂) content




ELECTRICAL PROPERTIES High dielectric, low constants

FINISH AL7, aluminum laminate one side w/ 8N

CERTIFICATIONS




Thermoglass™ Tapes

STYLE: Thermoglass™ Tapes

Industrial quality thermoglass tapes are carefully

woven and sized using fibreglass yarns. It is

recommended that these tapes be used at surface

temperatures ranging from 120˚F to 1000˚F. Typical

uses include lagging of all types, pipe insulation wrap,

electrical insulation and thermal insulation.

Industrial Quality Fibreglass Tapes

SPECIFICATIONS

G12RP372 G29RP372 G31RP372 G52RP372 G100RP372

Tape Thickness 1/32” 1/16” 1/16” 1/8” 1/4”

Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.

1/2” 04 0.4 0.8 0.7 1.5 ** 2.6

3/4” 06 0.6 1.3 1.0 2.2 4.1

1” 08 0.7 1.7 1.3* 2.8* 5.5

1.25” 09 0.9 2.1 1.6 3.6 6.7

1.5” 10 1.1 2.5 2.0* 4.2* 8.1

2” 12 1.4 3.4 2.6* 5.6* 10.9

2.5” 14 1.7 4.2 3.3* 7.0* 13.5

3” 16 2.1 5.1 3.9* 8.5* 16.4

3.5” 18 MTO MTO 4.5 9.9 —

4” 20 2.8 6.8 5.2 11.3 21.9

5” 21 3.5 8.5 6.5 14.1 27.3

6” 22 4.2 10.2 7.8 16.9 32.9

7” 46 — 11.8 9.1 19.7 —

8” 23 5.3 13.4 10.4 22.5 43.8

9” 72 — MTO MTO MTO MTO

10” 80 — 28.6 12.6 28.2 54.8

12” 96 — 28.7 14.9 33.2 65.7

** Two 50ft. Rolls packaged together

Drop Warp tape available for G31, G52, G100

Weight and size tolerance +/- 10%

Standard roll lengths, 100ft unless otherwise specified

5 roll minimum 6”-12”

Treatments Available:

* Heat Treatment (Tan colour) *Vermiculite Coating—Temp. 2000˚F

* Pressure Sensitive Tape 1/2” to 3” *Black Graphite

* Dyed Silicone rubber and PTFE Teflon

Product Features: Temperature Tolerance up to 1000˚F

(538˚C)

Will not burn, smolder or support flame

Retains 50% tensile strength at 700˚F and as much as 25% at 1000˚F

Does not stretch or shrink

Highest strength to weight ratio of in-dustrial textiles

Resistant to most chemicals and sol-vents

Fine glass filaments allow for great




Vertex Treated Tapes

STYLE: Vertex Tapes

Vertex treated tapes are woven and sized using

fibreglass yarns. The tapes are the coated with

Vertex, a high-temperature vermiculite coating. Uses

include lagging, pipe insulation wrap, electrical

insulation, thermal insulation, gasketing, automotive.

Vertex Treated Fibreglass Tapes

SPECIFICATIONS G19P752 G29RP372 G31RP372 G36P752 G52RP752 G65RP752 G100RP372 G120P752

Tape Thickness 1/32” 1/16” 1/16” 1/16” 1/8” 1/8” 1/4” 1/4”

Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.

1” 08 1.0 1.7 1.3 2.1 **2.8 4.2 5.5 9.1

1.5” 10 1.4 2.5 2.0 3.0 4.2 6.2 8.1 13.4

2” 12 1.9 3.4 2.6 4.1 5.6 8.2 10.9 18.2

3” 16 2.9 5.1 3.9 6.2 8.5 12.2 16.4 27.4

4” 20 3.8 6.8 5.2 8.2 11.3 15.2 21.9 36.5

5” 21 4.7 8.5 6.5 10.3 14.1 20.5 27.5 45.6

6” 22 5.7 10.1 7.8 12.3 16.9 24.5 32.9 54.7

7” 46 6.6 11.8 9.1 14.1 19.3 28.4 MTO MTO

8” 23 — 13.4 10.4 16.2 22.5 32.8 43.8 72.9

9” 72 — MTO MTO 17.9 MTO MTO MTO MTO

10” 80 — 28.6 12.6 20.0 28.2 40.6 54.8 MTO

12” 96 — 28.7 14.9 23.3 33.1 48.9 65.7 109.5


-Drop Warp tape available for G29 and G52, in some sizes

-Weight and size tolerance +/- 10%

-Standard roll lengths, 100ft unless otherwise specified

-5 roll minimum 6”-12”

Product Features: Direct Flame Tolerance up to 2000˚F

(1093˚C)

Will not burn, smolder or support flame

Does not stretch or shrink

Highest strength to weight ratio of in-dustrial textiles

Vertex treatment available in blue, black, or natural tan.

To order tape, select thickness and width you require. Identify the code number for proper tape width. This is the suffix

of the order part number. Example: you wish to order 1/16” thick tape at a width of 2”. The 1/16” thickness is tape

G29RP372. The width cod for 2” wide tape is 12. Therefore, specify G29RP372-12 tape when placing an order.




08TT132

STYLE: 08TT132

A Norfab 100% Kevlar® light weight fabric woven in a twill pattern. Applications include

safety clothing, aprons, cuffs, sleeves, caps and pockets and other garments. Fabric is

UV sensitive.

100% Kevlar® 8 oz. Safety Cloth

SPECIFICATIONS

BASE FABRIC 100% Kevlar®

COLOUR / APPEARANCE Yellow



WEAVE STYLE 3/1 Left Hand Twill, woven face down






TEMPERATURE TOLERANCE n/a

CHEMICAL RESISTANCE n/a


SUNLIGHT & AGE RESISTANCE Kevlar® yarns are UV sensitive


AVAILABLE FINISHES n/a

FINISH NUMBER 30 wear resistant, 39 firm hand

CERTIFICATIONS Meets NFPA 1971, 1997




08TT132-60-36GR

STYLE: 08TT132-60-36GR

A Norfab 100% Para-Aramid light weight fabric woven in a 3/1 left hand twill pattern,

woven face down. Fabric is coated both sides with medium grey silicone rubber.

Applications include safety clothing, aprons, cuffs, sleeves, caps and pockets , other

garments and cargo covers.

100% Kevlar® 8oz. Safety Fabric

SPECIFICATIONS

BASE FABRIC 100% Para-Aramid

COLOUR / APPEARANCE Grey



WEAVE STYLE 3/1 Left Hand Twill, woven face down





ABRASION RESISTANCE n/a


After flame, seconds 2.0

After glow, seconds 2.0

Char length, inches 0.3

CHEMICAL RESISTANCE n/a


SUNLIGHT & AGE RESISTANCE Kevlar® yarns are UV sensitive


FINISH NUMBER 36, medium grey silicone, both sides

CERTIFICATIONS

NOTE: This fabric has passed FAA’s one hour “Igloo Fire Test”

which may allow certain narrow body combi airplane operators to

comply with FAA’s new airworthiness directive #AD-93-07-15.




08TT333

STYLE: 08TT333

A Norfab CutPro® Natural light weight twill fabric of a ring spun 100% Kevlar yarn. Used

as cut resistant safety clothing with inherent flame resistance that will never wash or

wear out.

Norfab CutPro® Natural 8 oz. Cloth

SPECIFICATIONS

BASE FABRIC Kevlar®




WEAVE STYLE 2/1 Twill

FABRIC WEIGHT, oz/sq. yd. 8 oz. (271 gm/ sq. m)


TENSILE STRENGTH

ASTM D5034 (Grab) W&F) lbs. 430 x 350

CUT RESISTANCE

ANSI/ISEA 105-2016 Level A2

PUNCTURE RESISTANCE

ANSI/ISEA 105-2016 Level 5

ABRASION RESISTANCE TEST


CERITIFCATIONS

NFPA 1971, Standard on Protective Ensembles for

Structural Fire Fighting and Proximity Fire Fighting,

2013 Edition

CAN/CGSB 155.1, Standard on Firefighters Protective

Clothing for Protection Against Heat and Flame, 2001

Edition




09TT344

STYLE: 09TT344

A Norfab CutPro® Natural light weight twill fabric of a ring spun 100% Kevlar® yarn with

stainless steel wire reinforcement. Used as cut resistant safety clothing with inherent

flame resistance that will never wash or wear out.

Norfab CutPro® Natural 9 oz. Cloth

with Stainless Steel Wire

SPECIFICATIONS

BASE FABRIC Kevlar®/Stainless steel wire




WEAVE STYLE Twill

FABRIC WEIGHT, oz/sq. yd. 9 oz. +/-7% (305 gm/ sq. m)

FABRIC THICKNESS, inches 0.024 +/- .005 (0.61mm)

TENSILE STRENGTH


CUT RESISTANCE


PUNCTURE RESISTANCE


ABRASION RESISTANCE





10TT366

STYLE: 10TT366

Norfab CutPro® Vintage combines the strength, high thermal capability, cut resistance

and durability of Twaron® with the hardness of stainless steel. The unique composition

of CutPro® Vintage provides outstanding protection against hazards posed by sharp

objects and revolving or reciprocating blades.

Norfab CutPro® Vintage 10oz.

with Stainless Steel Wire

SPECIFICATIONS

BASE FABRIC Twaron®/Stainless Steel Wire

COLOUR / APPEARANCE Yellow with strip

AVAILABLE WIDTHS, inches 60 (1.5m)


WEAVE STYLE Twill

FABRIC WEIGHT, oz/sq. yd. 9.5 +/- 7% (322.11 gm./sq. m.)

FABRIC THICKNESS, inches .026 +/- .005 (0.66mm)

TENSILE STRENGTH


CUT RESISTANCE


PUNCTURE RESISTANCE


ABRASION RESISTANCE





22PT338

STYLE: 22PT338

A Norfab woven fabric of an Aramid fibre blend over a fibreglass core yarn. Applications

include safety clothing, gloves, mitts, jackets, curtains, and other industrial applications.

Resistant to heat sources up to 650 ˚F (340˚ C), offers excellent thermal protection.

22 oz. Aramid/Fibreglass cloth

SPECIFICATIONS

BASE FABRIC Aramid / Fibreglass


AVAILABLE WIDTHS, inches 40”, 60” (1.0, 1.5m)


WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 22 (747 gm/sq. m)





TEMPERATURE TOLERANCE Up to 650 ˚F




22PT30-AL7

STYLE: 22PT30- -AL7

A Norfab medium weight fabric of Aramid fibre blend with fibreglass core yarn,

aluminized one side. Applications include safety clothing, gloves, mitts, jackets, curtains,

and other industrial applications. Resistant to hear sources, offers excellent thermal

protection for safety garments.

22 oz. Aramid/Fibreglass cloth

Aluminized one side

SPECIFICATIONS

BASE FABRIC Aramid / Fibreglass

COLOUR / APPEARANCE Yellow, aluminized 1 side

AVAILABLE WIDTHS, inches 40”, 60”


WEAVE STYLE Plain

FABRIC WEIGHT, oz/sq. yd. 23 (780 gm/sq. m)




Flammability-After Flame (seconds) 0.0

Flammability– Char Length 0.0

Adhesion after Wet Flex Pass

Reflectivity after Abrasion (seconds) 39

RPP Rating (cal/cm²) 78

Taber Abrasion 1400




Norfab 400 Series Tapes

STYLE: Norfab Tapes

Carefully woven using Para-Aramid fibre blends over

fibreglass core yarn. Typical uses include lagging,

pipe insulation wrap, electrical insulation, thermal

insulation, gasketing.

Para-Aramid Tapes

SPECIFICATIONS

N11P400 N22P400 N44P400 N88P400

Tape Thickness 1/32” 1/16” 1/8” 1/4”

Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.

1/2” 04 0.32 0.54 **1.20 **2.28

3/4” 06 0.45 0.85 1.73 *3.33

1” 08 0.60 1.11 2.33 4.55

1.5” 10 0.90 1.66 3.41 6.91

2” 12 1.21 2.22 4.49 9.25

2.5” 14 1.50 2.78 5.58 11.61

3” 16 1.82 3.33 6.66 13.90

4” 20 *2.42 4.45 *9.05 18.67

5” 21 *3.02 5.55 *11.22 23.37

6” 22 *3.63 6.66 *13.39 27.54

7” 46 4.23 7.77 15.72 32.09

8” 23 4.83 8.88 18.05 36.64

9” 72 — 9.99 20.3 41.19

10” 80 — 11.11 22.71 45.74

11” 88 — 12.21 25.04 50.29

12” 96 — 13.32 27.37 54.84


Weight and size tolerance +/- 10%

Notes:

- Roll lengths 100 feet unless otherwise specified

- Pressure Sensitive Adhesive (PSA) available up to 3” wide

To order tape, select thickness and width you require. Identify the code number for proper tape width. This is the

suffix of the order part number. Example: you wish to order 1/16” thick tape at a width of 2”. The 1/16” thickness

is tape N22P400. The width cod for 2” wide tape is 12. Therefore, specify N22P400-12 tape when placing an

order.

Product Features: Heat Resistance up to 650˚F (340˚C)

DREF yarn construction

Excellent strength and abrasion resis-tance

Good flexibility

Good chemical resistance

Excellent Mildew resistance

Synthetic blend




05WKRS1-AL7

STYLE: 05WKRS1- -AL7

A Norfab knit light weight fabric of an Aramid fibre blend over a carbon core yarn (carbon

kevlar), aluminum laminate one side. Applications include light weight safety clothing,

mitts, gloves, jacket liner, and other industrial applications. Resistant to moderate heat

sources, offers good thermal protection for safety garments.

7.5oz. Aramid Carbon Aluminized Fabric

SPECIFICATIONS

BASE FABRIC Aramid cover with OPF insert

COLOUR / APPEARANCE Light green, aluminized 1 side



WEAVE STYLE Knit

FABRIC WEIGHT, oz/sq. yd. 7.5 (255 gm/sq.m.)


WARP STRENGTH, lbs (1” unravelled) 82 (37.20 Kg)

FILL STRENGTH, lbs (1”unravelled) 21 (9.53 Kg)

FLAMMABILITY-AFTER FLAME, sec-

onds 0

FLAMMABILITY CHAR LENGTH,

inches 0


Reflectivity after Abrasion, seconds 28


Taber Abrasion 1100




11HT156-AL7

STYLE: 11HT156- -AL7

A Norfab knit medium weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)

core yarn , aluminum laminate one side. Applications include safety clothing, mitts,

gloves, jackets, curtains and other industrial applications. Resistant to radiant heat

sources, offers excellent thermal protection for safety garments. Recommended for

molten metal splash protection.

14oz. Aramid Carbon Aluminized Fabric

SPECIFICATIONS

BASE FABRIC Aramid cover with OPF insert




WEAVE STYLE Herringbone Twill

FABRIC WEIGHT, oz/sq. yd. 14 (475 gm/sq.m.)


WARP STRENGTH, lbs 177 (80.29 Kg)

FILL STRENGTH, lbs 104 (47.17 Kg)

FLAMMABILITY-AFTER FLAME,

seconds 0


inches 0.3




Taber Abrasion 2100




11HT156-42.5-30

STYLE: 11HT156-42.4-30

A Norfab knit medium weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)

core yarn. Applications include safety clothing, mitts, gloves, jackets, curtains and other

industrial applications. Resistant to reflected heat sources, offers excellent thermal

protection for safety garments.

11oz. Plain Aramid Carbon Fabric

SPECIFICATIONS

BASE FABRIC Aramid/OPF

COLOUR / APPEARANCE Light green

AVAILABLE WIDTHS, inches 42.5”, 60” (1.08m)




FABRIC THICKNESS, inches 0.040 (+/-0.5”) (0.94mm)

WARP STRENGTH, lbs/in. 175 (80Kg/2.54cm)


ABRASION RESISTANCE Excellent

FINISH NUMBER 30, Wear Resistant




16HT65-AL7

STYLE: 16HT65-AL7

A Norfab knit heavy weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)

core yarn , aluminum laminate one side. Applications include safety clothing, mitts,

gloves, jackets, curtains and other industrial applications. Resistant to radiant heat

sources, offers excellent thermal protection for safety garments. Recommended for

molten metal splash protection.

19oz. Aramid Carbon Aluminized Fabric

SPECIFICATIONS

BASE FABRIC Aramid/OPF







WARP STRENGTH, lbs 256 (116.12 Kg)

FILL STRENGTH, lbs 168(76.20 Kg)

FLAMMABILITY-AFTER FLAME,

seconds 0


inches 0.2




Taber Abrasion 1700




FINISH NAME ABRREVIATION DESCRIPTION

00 Plain Untreated PL Loom stage of greige fabric

30 Wear Resist WR Improves fabric abrasion resistance

31 Heat Treated HT Removes most fibre starches and oils, fabric

takes a natural tan appearance.

34 Rewet Adhesive RA Rewettable fabrication adhesive

35 Flame Retardent FR Prevents fabric flame support

36 Silicone Rubber SR One or Two side coat of silicone rubber

39 Firm Hand FH Improves fabric stability and creates a stiffer

fabric

40 Form Hand with

Water/Oil repel FH-WO Firm hand with water and oil repellency

41 Water/Oil repel WO Water and oil repellency

42 Heat Treat + PVC HT-PV Heat treated fabric with PVC fibre binder

43 PVC coated PV PVC applied to bind woven fibres

45 Tacky Cloth TK1 Facilitates multiple layer fabrications of gaskets

and similar items

46 Dutchpro DP-YL Yellow neoprene coating on one side

47 Combo 31+35 HT-FR Heat Treated, Flame Retardant

48 Combo 35 + Colour FR-(colour) Flame retardant with colour

49 Combo 31+32 HT-WS Heat treated w/ weave set coating

50 Combo 31+Vert.903N HT-9N Heat treated w/ 9N vertex

51 Combo 31+729N HT-7N Heat treated w/ 7N vertex

52 Weldpro W-BK Black coating for welding fabric

53 Clear Acrylic CA Fibre binder for cutting and fabrication

56 Neoprene NE-(colour) Fabric coated both sides with neoprene

57 Combo 56+BK+VP NE-BK-VP Black neoprene with vertex powder

7B Vertex 729 Blue 7B Proprietary high temp. vermiculite coating

7N Vertex 729 Natural 7N Proprietary high temp. vermiculite coating

9B Vertex 903 Blue 9B Proprietary high temp. vermiculite coating

9N Vertex 903 Natural 9N Proprietary high temp. vermiculite coating

AL Aluminum Laminate AL Aluminum one side

FINISH OPTIONS

textiles catalogueintertex.ca/.../10/intertextextilesinctextilescatalogue1.pdfintertex textiles inc....

Documents