testing to perection container holder (4-peg …...testing to perection container holder (4-peg...
TRANSCRIPT
t e s t i n g t o p e r f e c t i o n
Container Holder (4-peg adjustable)
Specification
The 4-peg container holder is designed to securely hold different shapes and sizes of containers during tensile testing (e.g. sports caps or flipcaps). Available in two ranges of adjustability.
Use with crosshead extension 432-508.
Description
� Large container holder
� Small container holder
• pull-off closures
Applications
Part No. Load Capacity Thread 1 Container Min./Max. Ø Height (c)
432-411 100 N 10 kgf 22 lbf 4 x M5 10 mm / 190 mm 0.39" / 7.48" 102 mm 4.00"
432-493 100 N 10 kgf 22 lbf 4 x M5 10 mm / 78 mm 0.39" / 3.07" 103 mm 4.04"
t e s t i n g t o p e r f e c t i o n
North America Mecmesin Corporation
w: www.mecmesincorp.come: [email protected]
China Mecmesin (Shanghai) Pte Ltd
w: www.mecmesin.cne: [email protected]
France Mecmesin France
w: www.mecmesin.fre: [email protected]
Germany Mecmesin GmbH
w: www.mecmesin.dee: [email protected]
Asia Mecmesin Asia Co., Ltd
w: www.mecmesinasia.come: [email protected]
datasheet ref: DS-1107-02
Head Office - UK Mecmesin Limited
w: www.mecmesin.come: [email protected]
Mecmesin reserves the right to alter equipment specifications without prior notice. E&OE
Dimensions mm (inch)
1:2 @ A3
432-411 Container Holder (10-190mm)
ALL DIMENSIONS ARE IN MILLIMETRESFOLLOWED BY INCHES: MM ( IN" )
MIN/MAX O
SLOT 1
C
1:2 @ A3
432-493 Container Holder (10-78mm)
ALL DIMENSIONS ARE IN MILLIMETRESFOLLOWED BY INCHES: MM ( IN" )
MIN/MAX O
C
SLOT 1
� 431-411
� 431-493
DISTRIBUTOR STAMP