test report - falcom · pdf filenote: this test report is prepared for the customer shown...

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report contains data that are not covered by the NVLAP accreditation and are marked with an asterisk “★” (Rev.2)

TEST REPORT For

ELECTRONICS TECHNOLOGY (DONG GUAN) COMPANY LIMITED

No.161, Xin Min Road, Tong Luo Wei Industrial Zone, Jin Xia, Chang An Town, Dong Guan City,

Guang Dong Province, China

EN 301 511 V9.0.2 (2003-03)

Model: M430-2, M430-3, M500-2, M500-3, S430-2, S430-3, S500-2, S500-3, T430-2, T500-2, T500-3, E500, N430, N500, ME500-E, D4-43MD-11,

D4-43MD-12, D4-43MD-13, D4-43MD-14, D4-43MD-15, D4-43MD-21, D4-43MD-22, D4-43MD-23, D4-43MD-24, D4-43MD-25, D4-43MD-31, D4-43MD-32, D4-43MD-33, D4-43MD-34, D4-43MD-35, D4-50MD-01,

D4-50MD-02, D4-50MD-03, D4-50MD-04, D4-50MD-05, MDT501, TP501, MDT511, TP511

Report Type:

Original Report

Product Type:

GPS

Test Engineer:

Jimmy Xiao

Report Number:

RSZ110601001-11

Report Date:

2011-07-07

Reviewed By:

Merry Zhao EMC Engineer

Test Laboratory:

Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn

Bay Area Compliance Laboratories Corp. (Shenzhen) Model: M430-2, M430-3, M500-2, M500-3, S430-2, S430-3, S500-2, S500-3, T430-2, T500-2, T500-3, E500, N430, N500, ME500-E, D4-43MD-11,

D4-43MD-12, D4-43MD-13, D4-43MD-14, D4-43MD-15, D4-43MD-21, D4-43MD-22, D4-43MD-23, D4-43MD-24, D4-43MD-25, D4-43MD-31, D4-43MD-32, D4-43MD-33, D4-43MD-34, D4-43MD-35,

D4-50MD-01, D4-50MD-02, D4-50MD-03, D4-50MD-04, D4-50MD-05, MDT501, TP501, MDT511, TP511

Report No.: RSZ110601001-11 of 39 EN 301 511 V9.0.2 Test Report

TABLE OF CONTENTS GENERAL INFORMATION...................................................................................................................................... 4

PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 4 OBJECTIVE .................................................................................................................................................................. 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................ 4 TEST METHODOLOGY.................................................................................................................................................. 5 TEST FACILITY ............................................................................................................................................................ 5

SYSTEM TEST CONFIGURATION ......................................................................................................................... 6 JUSTIFICATION ............................................................................................................................................................ 6 EUT EXERCISE SOFTWARE ......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................ 6 EQUIPMENT MODIFICATIONS ...................................................................................................................................... 6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................ 6 EXTERNAL I/O CABLE................................................................................................................................................. 6 CONFIGURATION OF TEST SETUP................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ............................................................................................................................... 7

SUMMARY OF TEST REPORT................................................................................................................................ 8 §4.2.16 – RADIATED SPURIOUS EMISSIONS – MS ALLOCATED A CHANNEL .......................................... 9

APPLICABLE STANDARD ............................................................................................................................................. 9 TEST PROCEDURE........................................................................................................................................................ 9 TEST EQUIPMENT ...................................................................................................................................................... 10 ENVIRONMENTAL CONDITIONS ................................................................................................................................. 11 TEST RESULTS........................................................................................................................................................... 11

§4.2.17 – RADIATED SPURIOUS EMISSIONS – MS IN IDLE MODE.............................................................. 15 APPLICABLE STANDARD ........................................................................................................................................... 15 TEST PROCEDURE...................................................................................................................................................... 15 TEST EQUIPMENT ...................................................................................................................................................... 16 ENVIRONMENTAL CONDITIONS ................................................................................................................................. 16 TEST RESULTS........................................................................................................................................................... 17

EXHIBIT A - CE PRODUCT LABELING.............................................................................................................. 19 PROPOSED CE LABEL FORMAT ................................................................................................................................. 19 PROPOSED LABEL LOCATION ON EUT ...................................................................................................................... 19

EXHIBIT B - EUT PHOTOGRAPHS ...................................................................................................................... 20 EUT – FRONT VIEW .................................................................................................................................................. 20 EUT – REAR VIEW.................................................................................................................................................... 20 EUT – TOP VIEW ...................................................................................................................................................... 21 EUT – BOTTOM VIEW............................................................................................................................................... 21 EUT – LEFT SIDE VIEW ............................................................................................................................................ 22 EUT – RIGHT SIDE VIEW .......................................................................................................................................... 22 EUT – UNCOVER VIEW............................................................................................................................................. 23 EUT – MAIN BOARD WITH SHIELD TOP VIEW .......................................................................................................... 23 EUT – MAIN BOARD WITH SHIELD OFF TOP VIEW-1 ................................................................................................ 24 EUT – MAIN BOARD WITH SHIELD OFF TOP VIEW-2 ................................................................................................ 24 EUT – MAIN BOARD WITH SHIELD BOTTOM VIEW................................................................................................... 25 EUT – MAIN BOARD WITH SHIELD OFF BOTTOM VIEW ............................................................................................ 25





EUT – LCD TOP VIEW.............................................................................................................................................. 26 EUT – LCD BOTTOM VIEW ...................................................................................................................................... 26 EUT – GPRS MODULE WITH SHIELD TOP VIEW....................................................................................................... 27 EUT – GPRS MODULE WITH SHIELD OFF TOP VIEW ................................................................................................ 27 EUT – GPRS MODULE BOTTOM VIEW ..................................................................................................................... 28 EUT – GPS MODULE WITH SHIELD TOP VIEW .......................................................................................................... 28 EUT – GPS MODULE WITH SHIELD OFF TOP VIEW.................................................................................................... 29 EUT – GPS MODULE BOTTOM VIEW ........................................................................................................................ 29 EUT – BLUETOOTH ANTENNA VIEW......................................................................................................................... 30 EUT – GSM ANTENNA VIEW.................................................................................................................................... 30 EUT – GSM ANTENNA LOCATION VIEW .................................................................................................................. 31 EUT – WIFI ANTENNA TOP VIEW ............................................................................................................................ 31 EUT – WIFI ANTENNA BOTTOM VIEW..................................................................................................................... 32 EUT – ACCESSORY VIEW.......................................................................................................................................... 32 EUT – BATTERY TOP VIEW ...................................................................................................................................... 33 EUT – BATTERY BOTTOM VIEW............................................................................................................................... 33 EUT – ADAPTER VIEW.............................................................................................................................................. 34 EUT – ADAPTER INFORMATION VIEW ...................................................................................................................... 34 EUT – ADAPTER UNCOVERVIEW.............................................................................................................................. 35 EUT – ADAPTER MAIN BOARD TOP VIEW ................................................................................................................. 35 EUT – ADAPTER MAIN BOARD BOTTOM VIEW.......................................................................................................... 36

EXHIBIT C - TEST SETUP PHOTOGRAPHS ...................................................................................................... 37 RADIATED EMISSIONS - FRONT VIEW (BELOW 1 GHZ) ............................................................................................. 37 RADIATED EMISSIONS - REAR VIEW (BELOW 1 GHZ) ............................................................................................... 37 RADIATED EMISSIONS - FRONT VIEW (ABOVE 1 GHZ) ............................................................................................. 38 RADIATED EMISSIONS - REAR VIEW (ABOVE 1 GHZ) ............................................................................................... 38

PRODUCT SIMILARITY DECLARATION LETTER ......................................................................................... 39





GENERAL INFORMATION Product Description for Equipment under Test (EUT) The ELECTRONICS TECHNOLOGY (DONG GUAN) COMPANY LIMITED ’s product, model number: E500 or the "EUT" as referred to in this report is a GPS, which measures approximately: 14.9 cm (L) x 9.7 cm (W) x 2.3 cm (H), rated input voltage: DC 3.7 V Battery or DC 12-24V power source. Car adapter information: Model: SW-87180500200A; Input: DC 12-24V 2.5A; Output: DC 5V/2A *Note: The serial product model M430-2, M430-3, M500-2, M500-3, S430-2, S430-3, S500-2, S500-3, T430-2, T500-2, T500-3, E500, N430, N500, ME500-E, D4-43MD-11, D4-43MD-12, D4-43MD-13, D4-43MD-14, D4-43MD-15, D4-43MD-21, D4-43MD-22, D4-43MD-23, D4-43MD-24, D4-43MD-25, D4-43MD-31, D4-43MD-32, D4-43MD-33, D4-43MD-34, D4-43MD-35, D4-50MD-01, D4-50MD-02, D4-50MD-03, D4-50MD-04, D4-50MD-05, MDT501, TP501, MDT511, TP511, all the models are electrically identical, only their difference is model name, and we select model E500 for the testing in this report, which was explained in the attached declaration letter. * All measurement and test data in this report was gathered from production sample serial number: 1106001 (Assigned by Shenzhen BACL). The EUT was received on 2011-06-01. Objective The following type approved report of a radio equipment and system (RES) is prepared on behalf of the ELECTRONICS TECHNOLOGY (DONG GUAN) COMPANY LIMITED in accordance with EN 301 511 V9.0.2 (2003-03), Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and DCS1800 bands. The objective of the manufacturer is to determine compliance with EN 301 511 V9.0.2 (2003-03), Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and DCS 1800 bands. In order to determine compliance, the manufacturer or a contracted laboratory makes measurements and takes the necessary steps to ensure that the equipment complies with the appropriate technical standards. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product maybe which result in lowering the immunity should be checked to ensure compliance has been maintained (i.e., printed circuit board layout changes, different line filter, different power supply, harnessing and/or I/O cable changes, etc.). Related Submittal(s)/Grant(s) No Related Submittal(s).





Test Methodology All measurements contained in this report were conducted as specified in EN 301 511 V9.0.2 (2003-03). All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratory Corporation. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Test Facility The Test site used by Bay Area Compliance Laboratories Corp.(Shenzhen) to collect test data is located in the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on December 06, 2010. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2009. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratories Corp. (Shenzhen) is an ISO/IEC 17025 accredited laboratory, and is accredited by National Voluntary Laboratory Accredited Program (Lab Code 200707-0). The current scope of accreditations can be found at http://ts.nist.gov/Standards/scopes/2007070.htm .





SYSTEM TEST CONFIGURATION Justification The EUT and test equipment were configured for testing according to EN 301 511 V9.0.2 (2003-03). The GPRS item test was performed with the EUT operating at engineering mode. EUT Exercise Software N/A. Special Accessories N/A. Equipment Modifications No modifications were made to the EUT. Local Support Equipment List and Details

Manufacturer Description Model Serial Number FCC ID

R & S Universal Radio commutation tester CMU200 11000008.02 DoC

External I/O Cable

Cable Description Length (M) From/Port To

Unshielded detachable Power Cable 1.5 adapter EUT





Configuration of Test Setup Block Diagram of Test Setup

Horn Antenna

EUT

CMU200

1.5 Meter

1.0 Meter

Non-Conducting Table 150 cm above Ground Plane

EUT

AC PowerSource

HornAntenna CMU 200





SUMMARY OF TEST REPORT

EN 301 511 V9.0.2 (2003-03) Description of Test Result

Section 4.2.1 Transmitter – Frequency error and phase error Compliance*

Section 4.2.2 Transmitter – Frequency error under multi path and interference conditions Compliance*

Section 4.2.3 Transmitter – Frequency error and Phase Error in HSCSD Multi slot Configuration N/A

Section 4.2.4 Frequency error and phase error in GPRS multi slot configuration Compliance*

Section 4.2.5 Transmitter output power and burst timing Compliance*

Section 4.2.6 Transmitter – Output RF spectrum Compliance*

Section 4.2.7 Transmitter output power and burst timing in HSCSD multi slot configuration N/A

Section 4.2.8 Transmitter – Output RF spectrum in HSCSD multi slot configuration N/A

Section 4.2.9 Transmitter – Output RF spectrum for MS supporting the R-GSM frequency band N/A

Section 4.2.10 Transmitter output power in GPRS multi slot configuration Compliance*

Section 4.2.11 Output RF spectrum in GPRS multi slot configuration Compliance* Section 4.2.12 Conducted spurious emissions – MS allocated a channel Compliance* Section 4.2.13 Conducted spurious emission – MS in idle mode Compliance*

Section 4.2.14 Conducted spurious emissions for MS supporting the R-GSM frequency band – MS allocated a channel N/A

Section 4.2.15 Conducted spurious emissions for MS supporting the R-GSM frequency band – MS in idle mode N/A

Section 4.2.16 Radiated spurious emissions – MS allocated a channel Compliance Section 4.2.17 Radiated spurious emissions – MS in idle mode Compliance

Section 4.2.18 Radiated spurious emissions for MS supporting the R-GSM frequency band – MS allocated a channel N/A

Section 4.2.19 Radiated spurious emissions for MS supporting the R-GSM frequency band – MS in idle mode N/A

Section 4.2.20 Receiver blocking and spurious responses – speech channels Compliance*

Section 4.2.21 Receiver blocking and spurious response – speech channels for MS supporting the R-GSM frequency band N/A

Section 4.2.22 Frequency error and modulation accuracy in EGPRS configuration N/A

Section 4.2.23 Frequency error under multi path and interference conditions in EGPRS configuration N/A

Section 4.2.24 EGPRS Transmitter output power N/A

Section 4.2.25 Output RF spectrum in EGPRS configuration N/A

Section 4.2.26 Blocking and spurious response in EGPRS configuration N/A

Compliance*: Please refer to the report number. RFI\MCGA1\RP76921JD02A for Telit Communications S.p.A. issued on 10 May 2010 by RFI Global Services Ltd.





§4.2.16 – RADIATED SPURIOUS EMISSIONS – MS ALLOCATED A CHANNEL Applicable Standard Requirements: According to EN 301 511 V9.0.2 (2003-03), section 4.2.16, the radiated spurious power emitted by the MS, when allocated channel, shall be no more than the levels in table 5 under normal and extreme voltage conditions.

Table 5 Test Procedure a) Initially the test antenna is closely coupled to the MS and any spurious emission radiated by the MS is detected by the test antenna and receiver in the range 30 MHz to 4 GHz. NOTE 1: This is a qualitative step to identify the frequency and presence of spurious emissions which are to be measured in subsequent steps. b) The test antenna separation is set to the appropriate measurement distance and at each frequency at which an emission has been detected, the MS shall be rotated to obtain maximum response and the effective radiated power of the emission determined by a substitution measurement. In case of an anechoic shielded chamber pre-calibration may be used instead of a substitution measurement. c) The measurement bandwidth, based on a 5 pole synchronously tuned filter, is set according to table 6. The power indication is the peak power detected by the measuring system. The measurement on any frequency shall be performed for at least one TDMA frame period, with the exception of the idle frame. NOTE 2: This ensures that both the active times (MS transmitting) and the quiet times are measured. NOTE 3: For these filter bandwidths some difficulties may be experienced with noise floor above required measurement limit. This will depend on the gain of the test antenna, and adjustment of the measuring system bandwidth is permissible. Alternatively, for test frequencies above 900 MHz, the test antenna separation from the MS may be reduced to 1 meter. d) The measurements are repeated with the test antenna in the orthogonal polarization plane. e) The test is repeated under extreme voltage test conditions (see [annex 1, TC2.2]).





Table 6

Test Equipment

Manufacturer Description Model Serial Number

Calibration Date

Calibration Due Date

Rohde & Schwarz Spectrum Analyzer FSEM30 849720/019 2010-07-08 2011-07-07 HP Amplifier HP8447D 2944A09795 2010-08-02 2011-08-02

HP Amplifier HP8447E 1937A01046 2010-08-02 2011-08-02

HP Synthesized Sweeper 8341B 2624A00116 2010-11-07 2011-11-06

Hewlett-Packard Signal Generator 8657A 3217A04699 2010-11-03 2011-11-02

A.H. System Horn Antenna SAS-200/571 135 2011-05-17 2012-05-17

SUNOL SCIENCES Horn Antenna DRH-118 A052604 2011-05-05 2012-05-04

Rohde & Schwarz Communication, Radio Universal

CMU200 1100.0008.02 2010-10-28 2011-10-27

COM POWER Dipole Antenna AD-100 041000 2010-09-25 2011-09-25

Sunol Sciences Broadband Antenna JB1 A040904-1 2010-07-05 2011-07-04

Wellstar DC Power Supply PS-303 9901449 N/A N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed per the NVLAP requirements, traceable to the NIST.





Environmental Conditions

Temperature: 18 °C ~ 22 °C Relative Humidity: 45 % ~ 66 %

ATM Pressure: 101.1 kPa ~ 101.7 kPa

* Testing was performed by Jimmy Xiao on 2011-06-27.

Test Results

EGSM 900 Band Run # 1- 1: Scan 30MHz -4GHz, Middle Channel, and Normal Voltage Condition & High Voltage Condition Below 1 GHz Indicated Test Antenna Substituted

Freq. (MHz)

S.A. Reading (dBµV)

Table Angle Degree

Height (m)

Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

CableLoss(dB)

Absolute Level (dBm)

Limit(dBm)

Margin(dB)

264.5 39.65 335 1.1 V 264.5 -57.3 0 0.32 -57.62 -36 21.62 264.5 41.23 225 1.3 H 264.5 -57.4 0 0.32 -57.72 -36 21.72

Above 1 GHz Indicated Test Antenna Substituted

Freq. (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

CableLoss(dB)


Limit(dBm)

Margin(dB)

2706 46.8 140 1.5 V 2706 -48.4 7.2 1.08 -42.28 -30 12.28 1804 48.47 360 2.1 V 1804 -49.1 6.1 0.99 -43.99 -30 13.99 2706 40.24 180 1.9 H 2706 -56.6 7.2 1.08 -50.48 -30 20.48 1804 43.23 250 1.4 H 1804 -56.3 6.1 0.99 -51.19 -30 21.19





Run # 1- 2: Scan 30MHz -4GHz, Middle Channel, and Low voltage Below 1 GHz Indicated Test Antenna Substituted

Freq. (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

CableLoss(dB)


Limit(dBm)

Margin(dB)

264.5 40.12 340 1.2 V 264.5 -56.7 0 0.32 -57.02 -36 21.02 264.5 41.85 230 1.4 H 264.5 -56.8 0 0.32 -57.12 -36 21.12


Freq. (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

CableLoss(dB)


Limit(dBm)

Margin(dB)

2706 47.12 150 1.6 V 2706 -47.9 7.2 1.08 -41.78 -30 11.78 1804 47.98 330 1.9 V 1804 -50.2 6.1 0.99 -45.09 -30 15.09 2706 40.65 170 2 H 2706 -56.1 7.2 1.08 -49.98 -30 19.98 1804 43.12 270 1.5 H 1804 -56.5 6.1 0.99 -51.39 -30 21.39





DCS1800 Band

Run # 1- 1: Scan 30MHz -4GHz, Middle Channel, and Normal Voltage Condition & High Voltage Condition Below 1 GHz

Indicated Test Antenna Substituted

Freq. (MHz)


Table Angle Degree Height

(m) Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

CableLoss(dB)


Limit(dBm)

Margin(dB)

741.3 38.12 0 1.4 V 741.3 -59.4 0 0.63 -60.03 -36 24.03 741.3 36.45 180 1.8 H 741.3 -63.2 0 0.63 -63.83 -36 27.83

Above 1 GHz


Freq. (MHz)



(m) Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

CableLoss(dB)


Limit(dBm)

Margin(dB)

3495.6 40.22 210 1.6 V 3495.6 -51.2 6.7 1.41 -45.91 -30 15.91 3495.6 38.77 230 1.9 H 3495.6 -54.5 6.7 1.41 -49.21 -30 19.21 1546.9 38.15 360 2.1 V 1546.9 -58.7 6.3 0.93 -53.33 -30 23.33 1546.9 37.26 351 1.5 H 1546.9 -62.6 6.3 0.93 -57.23 -30 27.23





Run # 2- 2: Scan 30MHz -4GHz, Middle Channel, and Low Voltage Below 1 GHz


Freq. (MHz)



(m) Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

CableLoss(dB)


Limit(dBm)

Margin(dB)

741.3 37.79 10 1.3 V 741.3 -59.7 0 0.63 -60.33 -36 24.33 741.3 36.12 170 1.9 H 741.3 -63.5 0 0.63 -64.13 -36 28.13

Above 1 GHz


Freq. (MHz)



(m) Polar (H/V)

Freq. (MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

CableLoss(dB)


Limit(dBm)

Margin(dB)

3495.6 40.11 230 1.5 V 3495.6 -51.4 6.7 1.41 -46.11 -30 16.11 3495.6 38.15 250 2 H 3495.6 -54.9 6.7 1.41 -49.61 -30 19.61 1546.9 38.46 340 2.3 V 1546.9 -58.3 6.3 0.93 -52.93 -30 22.93 1546.9 38.12 360 1.6 H 1546.9 -62.1 6.3 0.93 -56.73 -30 26.73





§4.2.17 – RADIATED SPURIOUS EMISSIONS – MS IN IDLE MODE Applicable Standard Requirements: According to EN 301 511 V9.0.2 (2003-03), section 4.2.17, the radiated spurious power emitted by the MS, when in idle mode, shall be no more than the levels in table 7 under normal and extreme voltage conditions.

Table 7 Test Procedure a) Initially the test antenna is closely coupled to the MS and any spurious emission radiated by the MS is detected by the test antenna and receiver in the range 30 MHz to 4 GHz. NOTE 1: This is a qualitative step to identify the frequency and presence of spurious emissions which are to be measured in subsequent steps. b) The test antenna separation is set to the appropriate measurement distance and at each frequency at which a spurious emission has been detected the MS is rotated to obtain a maximum response. The effective radiated power of the emission is determined by a substitution measurement. In case of an anechoic shielded chamber pre-calibration may be used instead of a substitution measurement. c) The measurement bandwidth based on a 5 pole synchronously tuned filter shall be according to table 8. The power indication is the peak power detected by the measuring system. The measurement time on any frequency shall be such that it includes the time during which the MS receives a TDMA frame containing the paging channel. NOTE 2: For these filter bandwidths some difficulties may be experienced with noise floor above required measurement limit. This will depend on the gain of the test antenna, and adjustment of the measuring system bandwidth is permissible. Alternatively, for test frequencies above 900 MHz, the test antenna separation from the MS may be reduced to 1 meter.

Table 8

d) The measurements are repeated with the test antenna in the orthogonal polarization plane. e) The test is repeated under extreme voltage test conditions (see [Annex 1, TC2.2]).





Test Equipment

Manufacturer Description Model Serial Number

Calibration Date

Calibration Due Date

Rohde & Schwarz Spectrum Analyzer FSEM30 849720/019 2010-07-08 2011-07-07

HP Amplifier HP8447D 2944A09795 2010-08-02 2011-08-02

HP Amplifier HP8447E 1937A01046 2010-08-02 2011-08-02

HP Synthesized Sweeper 8341B 2624A00116 2010-11-07 2011-11-06

Hewlett-Packard Signal Generator 8657A 3217A04699 2010-11-03 2011-11-02

A.H. System Horn Antenna SAS-200/571 135 2011-05-17 2012-05-17

SUNOL SCIENCES Horn Antenna DRH-118 A052604 2011-05-05 2012-05-04

Rohde & Schwarz Communication, Radio Universal

CMU200 1100.0008.02 2010-10-28 2011-10-27

COM POWER Dipole Antenna AD-100 041000 2010-09-25 2011-09-25

Sunol Sciences Broadband Antenna JB1 A040904-1 2010-07-05 2011-07-04

Wellstar DC Power Supply PS-303 9901449 N/A N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed per the NVLAP requirements, traceable to the NIST.

Environmental Conditions

Temperature: 18 °C ~ 22 °C Relative Humidity: 45 % ~ 66 %

ATM Pressure: 101.1 kPa ~ 101.7 kPa

* Testing was performed by Jimmy Xiao on 2011-06-27.





Test Results

GSM900 Band Run # 1-1: Scan 30MHz -4GHz, Idle Mode and Normal Voltage Condition & High Voltage Condition Below 1 GHz Indicated Test Antenna Substituted

Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

256.36 24.32 183.00 1.20 H 256.36 -72.4 0 0.31 -72.71 -57 15.71 256.36 24.16 205.00 1.90 V 256.36 -72.6 0 0.31 -72.91 -57 15.91


Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

1484.56 35.52 159.00 2.10 H 1484.56 -63.4 6.3 0.91 -58.01 -47 11.01 1484.56 35.13 195.00 1.80 V 1484.56 -63.8 6.3 0.91 -58.41 -47 11.41

Run # 1-2: Scan 30MHz -4GHz, Idle Mode and Low Voltage Below 1 GHz Indicated Test Antenna Substituted

Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

256.36 23.33 261.00 1.20 H 256.36 -73.6 0 0.45 -74.05 -57 17.05256.36 23.17 253.00 1.90 V 256.36 -73.8 0 0.45 -74.25 -57 17.25


Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

1484.56 33.85 150.00 2.10 H 1484.56 -65.1 6.1 0.91 -59.91 -47 12.91 1484.56 32.56 185.00 1.80 V 1484.56 -66.4 6.1 0.91 -61.21 -47 14.21





DCS1800 Band

Run # 2-1: Scan 30MHz -4GHz, Idle Mode and Normal Voltage Condition & High Voltage Condition Below 1 GHz Indicated Test Antenna Substituted

Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

305.23 23.79 180.00 2.10 V 305.23 -74.2 0 0.36 -74.56 -57 17.56 305.23 23.18 130.00 1.90 H 305.23 -74.8 0 0.36 -75.16 -57 18.16


Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

1469.54 38.52 241.00 1.60 V 1469.54 -60.4 6.4 0.91 -54.91 -47 7.91 1469.54 38.21 213.00 1.70 H 1469.54 -60.7 6.4 0.91 -55.21 -47 8.21

Run # 2-2: Scan 30MHz -4GHz, Idle Mode and Low Voltage Below 1 GHz Indicated Test Antenna Substituted

Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBd)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

315.23 22.95 174.00 2.10 V 315.23 -75.0 0 0.36 -75.36 -57 18.36 315.23 22.54 325.00 1.90 H 315.23 -75.4 0 0.36 -75.76 -57 18.76


Frequency (MHz)


Table Angle Degree

Height (m)

Polar (H/V)

Frequency(MHz)

Level(dBm)

Antenna Gain

Correction(dBi)

Cable Loss (dB)

Absolute Level

( dBm)

Limit(dBm)

Margin(dB)

1469.54 37.48 248.00 1.60 V 1469.54 -61.5 6.4 0.91 -56.01 -47 9.01 1469.54 37.31 204.00 1.70 H 1469.54 -61.6 6.4 0.91 -56.11 -47 9.11





EXHIBIT A - CE PRODUCT LABELING Proposed CE Label Format Specifications: Text is black in color and is left justified. Labels are printed in indelible ink on permanent adhesive

backing and shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT





EXHIBIT B - EUT PHOTOGRAPHS

EUT – Front View

EUT – Rear View





EUT – Top View

EUT – Bottom View





EUT – Left Side View

EUT – Right Side View





EUT – Uncover View

EUT – Main Board with Shield Top View





EUT – Main Board with Shield off Top View-1

EUT – Main Board with Shield off Top View-2





EUT – Main Board with Shield Bottom View

EUT – Main Board with Shield off Bottom View





EUT – LCD Top View

EUT – LCD Bottom View





EUT – GPRS Module with Shield Top View

EUT – GPRS Module with Shield off Top View





EUT – GPRS Module Bottom View

EUT – GPS module with Shield Top View





EUT – GPS module with Shield off Top View

EUT – GPS module Bottom View





EUT – Bluetooth Antenna View

EUT – GSM Antenna View





EUT – GSM Antenna Location View

EUT – WIFI Antenna Top View





EUT – WIFI Antenna Bottom View

EUT – Accessory View





EUT – Battery Top View

EUT – Battery Bottom View





EUT – Adapter View

EUT – Adapter Information View





EUT – Adapter UncoverView

EUT – Adapter Main board top View





EUT – Adapter Main board bottom View





EXHIBIT C - TEST SETUP PHOTOGRAPHS

Radiated Emissions - Front View (Below 1 GHz)

Radiated Emissions - Rear View (Below 1 GHz)





Radiated Emissions - Front View (Above 1 GHz)

Radiated Emissions - Rear View (Above 1 GHz)





PRODUCT SIMILARITY DECLARATION LETTER

*****END OF REPORT*****

test report - falcom · pdf filenote: this test report is prepared for the customer shown...

Documents