teracom modem
TRANSCRIPT
-
TERACOM MODEM CONFIGURATIONAccessing the Router
Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.1.1.Step 2 In the Login page that is displayed, enter the username and password.The username and password of the administrator are admin and admin
-
After Click on OK. This page will be displayed
-
After click on interface setup This page will be displayed
-
Set VPI : 0 (ZERO)Set VCI : 35 (THIRTY FIVE)Encapsulation : PPPoA/PPPoE Set User name & password, as per CDR Detail.Set Encapsulation : PPPoE LLCSet Default Route : YESDo not change any other parameters.Click on SAVE.
-
After click on wireless This page will be displayed
-
Set SSID value as per customer choice or BSNL.
-
Select WEP-64Bits in Authentication Type
-
WEB-64Bits keyFor key, please enter either (1) 5 characters excluding symbols, or (2) 10 characters ranging from 0~9, a, b, c, d, e, f.
-
Set key#1 value
-
Set Wireless MAC Address Filter to DEACTIVATED, then Click on SAVE
-
After click on Maintenance This page will be displayed
-
After click on Sys Restart, this page will be displayedSelect Current Settings, then click on RESTART
-
Wait up to SYSTEM RESTART shown 100%
-
For any other modem configuration pl. Click on
http://www.calcutta.bsnl.co.in/BB/dataoneinstall/menu.html
-
THANKS