tentative program - issi-2020
TRANSCRIPT
2020 International Symposium on Structural Integrity
Oct 22−24, 2020 Suzhou, China
issi2020.china-sic.net
Tentative Program
2020
International Symposium on
Structural Integrity Oct 22-24, Suzhou, China
Hosted by
China Structural Integrity Consortium
Locally organized by
Suzhou Nuclear Power Research Institute Co., Ltd
Co-organized by
Supported by
National Natural Science Foundation of China
Chinese Materials Institution (Committee of High Temperature Strength of Materials)
Chinese Pressure Vessel Institution
Chinese Failure Analysis Institution
Program at a glance
Day Time Event Place
Oct 21 10:00—22:00 Registration Hotel lobby
Oct 22
08:30—08:50 Conference opening Hehe Hall
08:50—09:50 Plenary session I
09:50—10:30 Group photos & coffee break
10:30—12:00 Plenary session II Hehe Hall
12:00— Lunch
14:00—15:30 Plenary session III Hehe Hall
15:30—16:00 Coffee break
16:00—17:30 Plenary session IV Hehe Hall
18:30—20:30 Conference dinner
Oct 23
08:30—09:55 Technical sessions I-VI
09:55—10:25 Coffee break
10:25—12:10 Technical sessions VII-XII
12:10— Lunch
13:30—14:55 Technical sessions XIII-XVII
14:55—15:25 Coffee break
15:25—17:10 Technical sessions XVIII-XXII
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for dinner
Oct 24
08:00—09:25 Technical sessions XXIII-XXVII
09:25—10:00 Coffee break
10:00—11:00 Plenary session V Hehe Hall
11:00—11:40 Closing ceremony Hehe Hall
14:00—18:00 Technical visiting (some participants only)
End
REGISTRATION
10:00—22:00 On-site registration
Xiangshan International Hotel, Taihu Lake Suzhou
18:00— Reception buffet
Xiangshan International Hotel, Taihu Lake Suzhou
◼ The symposium registration is open from 10am to 10pm on Oct 21, 2020, at the main lobby of
the Xiangshan International Hotel, Taihu Lake Suzhou, located at 1 Yanbo Road, Taihu
National Tourism Vacation Zone, Suzhou, 215166, Jiangsu, China
◼ Later participants who cannot arrive on Oct 21, 2020 can register at the symposium reception
center on the morning of Oct 22/23, 2020 from 8am to 9am.
◼ Registration fee will be 360 USD (2600RMB). Students are welcome with a reduced registration
fee of 270 USD (1800RMB). The registration fee covers admission to all technical sessions; two
refreshment breaks each day of the conference, lunches, dinners, conference banquet, and a
copy of the conference proceedings, but not accommodation.
注册/住宿:苏州太湖香山国际大酒店(吴中区环太湖大道烟波路 1号)
会议地址:太湖国际会议中心(吴中区环太湖大道 128号)
Oct 21, 2020
Day 1: detailed program
CONFERENCE OPENING //Hehe Hall
08:30 Introductory comments
Dr Jinhua Shi, Executive chairman of ISSI2020
Suzhou Nuclear Power Research Institute Co., Ltd
08:35 Welcome address
Officials from several units, China
08:40 Opening speech
Prof Shan-Tung Tu, Chairman of Symposium Series
East China University of Science and Technology, China
PLENARY SESSION I //Hehe Hall
Session chair: Shan-Tung Tu (East China University of Science and Technology, China)
08:50—09:20 TBD
Prof Xuedong Chen
Hefei General Machinery Research Institute, China
09:20—09:50 Recent Advances in Fatigue Evaluation Methods for Pressure Vessels and Piping Components and Proposed ASME Code Revisions Prof Pingsha Dong
University of Michigan, USA
09:50—10:30 Group Photo & Coffee Break
PLENARY SESSION II //Hehe Hall
Session chair:
10:30—11:00 Weight Function Methods for Structural Integrity Analysis: Theoretical Developments and Engineering Applications Prof Xueren Wu
AECC Beijing Institute of Aeronautical Materials, China 11:00—11:30 Life evaluation of 9Cr steels used for a long time in USC power plant
Prof Koichi Yagi
University of Science & Technology Beijing, China 11:30—12:00 Simulation of Interacting Ductile and Cleavage Fracture at Transition
Temperature and Application to Drop Weight Tearing Test Simulation
Oct 22, 2020
Prof Yun-Jae Kim
Korea University, Korea
12:00— Lunch
PLENARY SESSION III //Hehe Hall
Session chair:
14:00—14:30 Structural integrity of nanomaterials based mechanical systems:
concept, processing, simulation and applications
Prof Jian Lu
City University of Hong Kong, China
14:30—15:00 A Multiaxial Stress Analysis for Extracting Creep Exponents and
Coefficients from an Indentation Creep Test
Prof Masao Sakane
Ritsumeikan University, Japan
15:00—15:30 Predicting High Temperature Hydrogen Attack and Creep Deformation in A Low Alloy Steel Component Prof Kamran Nikbin
Imperial College London, UK
15:30—16:00 Coffee break
PLENARY SESSION IV //Hehe Hall
Session chair:
16:00—16:30 Case Studies Arising from the Aftermath of Accidents Prof Rod Smith
Imperial College London, UK
16:30—17:00 On the Effects of Multi-axial Loading on Microvoid Evolution in FCC Single Crystals Prof Esteban Busso Imperial College London, UK
17:00—17:30 Process-Structure-Property for Manufacture of Welded Steel Catanery
Risers: Characterisation of Inhomogeneity of Plasticity and Fatigue
Damage
Prof Seán Leen
NUI Galway, Ireland
18:30—20:30 Conference dinner
Nov 03, 2018 Oct 22, 2020
Day 2: detailed program
TECHNICAL SESSION I: Creep-fatigue interaction
Session chair:
08:30—08:55 Keynote lecture
Creep-fatigue Life Evaluation of SUS304 Stainless Steel under Non-proportional Loading Le Xu, Takaki Kojima, Takamoto Itoh
Ritsumeikan University, Japan
08:55—09:15 Creep rupture assessment of cyclically loaded 3D pressure vessel with volume defect using a direct numerical approach Heng Peng, Yinghua Liu
Tsinghua University, China
09:15—09:35 The numerical and experimental studies on creep fatigue behaviors of P92 steel by using Chaboche model Jianfeng Mao Zhejiang University of Technology, China
09:35—09:55 Creep fatigue interaction behaviors of P92 steel under hybrid stress-strain controlled loading Tianyu Zhang, Xiaowei Wang, Jianming Gong Nanjing Tech University, China
09:55—10:25 Coffee break
TECHNICAL SESSION II: Life management
Session chair:
08:30—08:55 Keynote lecture
Research on Low Temperature Brittleness of 30Cr1Mo1V High-temperature Rotor and Its Life Control in Rapid Start-up and Warm-up process Minjin Tang, Xianxi Xia, Xiancheng Zhang, Fei Xue, Guodong Zhang Suzhou Nuclear Power Research Institute, China
08:55—09:15 Deterioration of Microstructure and Mechanical Properties of 2.25Cr-1Mo Main Steam Pipe weldment after 32 Years of Service Bin Yang, Wenchun Jiang, Mingchao Li, Jingkai Chen, Mingda Song, Hao Zhang China University of Petroleum (East China), China
Oct 23, 2020
09:15—09:35 Study on the heat treatment of furnace roller in continuous annealing line after long term use Shukai Cao, Lu Wang, Weize Wang, Shantung Tu
East China University of Science and Technology, China
09:35—09:55 Fatigue-creep Life Assessment of the Superheater Outlet Header for 330MW Subcritical Thermal Power during Extended Service Period Baoyin Zhu, Xianxi Xia, Xiao Jin, Jinhua Shi, Fei Xue, Guodong Zhang Suzhou Nuclear Power Research Institute, China
09:55—10:25 Coffee break
TECHNICAL SESSION III: Materials testing and modeling
Session chair:
08:30—08:55 Keynote lecture
Grain refinement and coarsening in martensite steel under sliding wear Yunshuai Su, Shuxin Li, Qingyuan Gao, Feng Yu, Siyuan Lu Ningbo University, China
08:55—09:15 Temper embrittlement of 2.25Cr-1Mo-0.25V steel and its welded joint based on the theory of equilibrium grain boundary segregation Zhipeng Shen, Hanhan Ma, Wei Fu, Lingrui Kong, Xiaochun Yu, Xiaohua He, Changyu Zhou Nanjing Tech University, China
09:15—09:35 Microstructure of S400 sorbite stainless steel and its comparison on 12Cr13 martensite stainless steel Sheeraz Khan, Jie Zhao, Congqian Cheng, Tieshan Cao, Xin Guan Dalian university of Technology, China
09:35—09:55 Effect of Vibratory Stress Relief on Residual Stress and Microstructure of the SA738Gr.B Steel Welding Joint Yu Wan, Lei Zhang, Wenchun Jiang China University of Petroleum (East China), China
09:55—10:25 Coffee break
TECHNICAL SESSION IV: New testing method
Session chair:
08:30—08:55 Keynote lecture
A method to determine the strength from a single indentation test Liyang Huang, JiRu Zhong, Guoyao Chen, Tong Xu, Kaishu Guan East China University of Science and Technology, China
08:55—09:15 A Design for the Optimum Shape of Miniature Cruciform Specimen
Toru Miyake, Hiroyoshi Shimomura, Takamoto Itoh
Ritsumeikan University, Japan
09:15—09:35 A novel method of compression test for rings to determine stress-strain relations and mechanical properties of metallic materials Guangzhao Han, Lixun Cai, Chen Bao, Yuhuai He, Yang Lv, WeiWei Yu, Xiang Wang, Yangang Liu Southwest Jiaotong University, China
09:35—09:55 Improvement of the test standards for determination of mode I interlaminar fracture toughness of composite under large deformation Wu Xu, Jiancan Ding Shanghai Jiao Tong University, China
09:55—10:25 Coffee break
TECHNICAL SESSION V: Fatigue behavior
Session chair:
08:30—08:55 Keynote lecture
A new testing method for fatigue propagation rate of mixed-mode I-II crack Shuang Qi Taishan Nuclear Power Joint Venture Co., Ltd., China
08:55—09:15 Effect of thermal aging time on ratcheting boundary of 316LN austenitic stainless steel Caiming Liu, Bingbing Li, Yiming Zheng, Xu Chen Tianjin University, China
09:15—09:35 Role of Microstructure Characteristics on the Cyclic Mechanics and Fatigue Fracture Behavior of SAF2205 Duplex Steel in Terms of Phase Radio and Precipitations Zhilong Dong, Xuefang Xie, Wenchun Jiang China University of Petroleum (East China), China
09:35—09:55 Temperature-dependent ratchet deformation of high density polyethylene (HDPE) under cyclic compression Peishan Ding, Tianping Cheng, Xiaotao Zheng Wuhan Institute of Technology, China
09:55—10:25 Coffee break
TECHNICAL SESSION VI: Reliability-centered manufacturing
Session chair:
10:25—10:50 Keynote lecture
Study on tensile fracture properties of industrial pure zirconium with surface nanocrystallization Conghui Zhang
Xi'an University of Architecture and Technology, China
10:50—11:10 Fracture Analysis for the Pin of Metal Bellow Expansion Joint Dungui Zuo, Zhongwei zhang, Yunting Lai, Guodong Zhang, Fei xue Suzhou Nuclear Power Research Institute, China
11:10—11:30 Effect of heat input on mechanical properties and microscopic characteristics of primary pipe branch connections in nuclear power plant Liang Zhao, Kunjie Luo, Shantung Tu East China University of Science and Technology, China
11:30—11:50 The effect of roughness of the substrate on the microstructure and anti-corrosion property of graphene oxide coating Yuting Zhang, Farzin Arjmand, Kaishu Guan East China University of Science and Technology, China
11:50— Lunch
TECHNICAL SESSION VII: Data-driven strength
Session chair:
10:25—10:50 Keynote lecture
Stress corrosion cracking sensitivity prediction of 316L austenitic stainless steel based on Ensemble Learning Luowei Cao, Yuqian Du, Junmin Liu, Guanghai Li China Special Equipment Inspection and Research Institute, China
10:50—11:10 Using RBF Neural Network to Predict the Mechanical Properties of Nuclear-Grade Type 316 Stainless Steel during High Temperature Sodium Corrosion Yaonan Dai, Xiaotao Zheng, Jiuyang Yu
Wuhan Institute of Technology, China
11:10—11:30 A multiaxial fatigue life prediction method based on support vector machine Xingyue Sun, Xu Chen, Kai Song, Shouwen Shi Tianjin University, China
11:30—11:50 Application of database for determining uniaxial stress-strain relationship by spherical indentation test Guoyao Chen, Xiaocheng Zhang, Jiru Zhong, Kaishu Guan East China University of Science and Technology, China
11:50—12:10 Evaluation of strength properties of in-service X80 pipeline steel using small punch test and backpropagation neural network Ming Song, Xuyang Li, Yuguang Cao, Wenchun Jiang, Jiru Zhong, Kaishu Guan China University of Petroleum (East China), China
12:10— Lunch
TECHNICAL SESSION VIII: Safety assessment
Session chair:
10:25—10:50 Keynote lecture
Failure estimation method for locally wall-thinned pipes Yinsheng Li, Yoshihito Yamaguchi, Jinya Katsuyama Japan Atomic Energy Agency, Japan
10:50—11:10 Finite element analysis of limit load for cylinders with axial cracks under combined internal pressure, axial force and global bending moment Zhancheng Yang, Yuebing Li, Yuebao Lei, Zengliang Gao
Zhejiang University of Technology, China
11:10—11:30 Stress intensity factors for RPV nozzle corner crack under combined internal pressure and nozzle loading Yuebing Li, Ting Jin, Zihang Wang, Pan Liu China Nuclear Power Engineering Co., Ltd, China
11:30—11:50 Structural integrity assessment of a sandwich high-pressure shell in presence of welding defects Liang Shi China Aero-Polytechnology Establishment, China
11:50—12:10 Analysis and calculation of strength and rigidity for flexible shell element of corner to corner type in fixed tubesheet heat exchangers Guodong Zhu China Special Equipment Inspection and Research Institute, China
12:10— Lunch
TECHNICAL SESSION IX: Structure health monitoring
Session chair:
10:25—10:50 Keynote lecture
Nonlinear ultrasonic phased array testing techniques for pressure equipment Jingwei Cheng, Zhe Wang, Zhichao Fan Hefei General Machinery Research Institute, China
10:50—11:10 Application of Comparative Analysis of Two-round In-line Inspection Data in Integrity Evaluation of Product Oil Pipelines Mingfei Li, Jian Chen, Song Lin PetroChina Pipeline R&D Center, China
11:10—11:30 An adaptive signal interception defect location method for pressure vessels based on SDC coefficient Qinfei Li, Shaoping Zhou, Gangyi Hu, Tianhao He East China University of Science and Technology, China
11:30—11:50 Study on Ultrasonic Characteristic Parameters for Distinguishing High Temperature Tissue and Creep Damage Keyi Yuan, Hui Zheng, Ming Song, Bin Hu
China Special Equipment Inspection and Research Institute, China
11:50—12:10 Numerical Study of Detection of Micro-Cracks on Corroded Surface Using EMAT-Generated Guided Waves Zhe Wang, Jingwei Cheng, Zhichao Fan Hefei General Machinery Research Institute, China
12:10— Lunch
TECHNICAL SESSION X: Chemo-mechanical interaction
Session chair:
10:25—10:50 Keynote lecture
Stress Corrosion Cracking and Relevant Integrity Evaluation of Ni-based Alloy Dissimilar Metal Welds Guangfu Li Shanghai Research Institute of Materials (SRIM), China
10:50—11:10 High-temperature passive oxidation behaviors of direct-sintered silicon carbide Yue Zhang, Rong Jiang, Leicheng Zhang, Xihui Chen, Xiguang Gao, Yingdong Song Nanjing University of Aeronautics and Astronautics, China
11:10—11:30 Chemical degradation induced decay in mechanical responses of fuel cell membranes Shouwen Shi, Xiaoyi Sun, Xu Chen Tianjin University, China
11:30—11:50 The corrosion thinning character analysis of the secondary loop piping in nuclear power plant Liang Zhao, Kunjie Luo, Shantung Tu East China University of Science and Technology, China
11:50—12:10 Study on the Microstructure and Plasma Irradiation Simulation of CrFeMnVCu High Entropy Alloy Ke Liu, Sujun Wu
Beihang University, China
12:10— Lunch
TECHNICAL SESSION XI: Fatigue behaviour
Session chair:
13:30—13:55 Keynote lecture
A generalized fatigue life prediction model for strain controlled and hybrid stress-strain controlled creep-fatigue loading Xiaowei Wang, Tianyu Zhang, Jianming Gong Nanjing Tech University, China
13:55—14:10 On the Role of Typical Processing Technology on Fatigue Behaviour for a PM Ni-based Superalloy at Room Temperature Long Tan, Yongsheng Fan, Xiaoguang Yang, Duoqi Shi Beihang University, China
14:10—14:25 Effects of phase difference and stress ratio on biaxial fatigue crack propagation behavior of rolled ZK60 magnesium alloy Jiaqi Hu, Hong Gao Tianjin university, China
14:25—14:40 Low cycle fatigue and stress relaxation behaviors of an advanced powder metallurgy Ni-based superalloys Leicheng Zhang, Rong Jiang, Yue Zhang, Wentian Zhang, Yingdong Song Nanjing University of Aeronautics and Astronautics, China
14:45—14:55 Tensile fatigue behavior and life prediction model of pultruded fiber-reinforced composite considering dispersion Qian Zhang, Jianlin Liu, Wenchun Jiang China University of Petroleum (East China), China
14:55—15:25 Coffee break
TECHNICAL SESSION XII: Creep behavior
Session chair:
13:30—13:55 Keynote lecture
Damage analysis tensile creep anisotropy of Mg-6Al-3Zn-Y alloy extruded sheet Weiying Huang, Jian Chen, Wei Li, Jianjun He, Cong Li, Libo Zhou Changsha University of Science and Technology, China
13:55—14:10 Finite-element creep damage analyses of cast 20Cr32Ni1Nb steel Xiaofeng Guo, Benxin Liu, Chengming Fuyang, Jianming Gong Inner Mongolia University of Science and Technology, China
14:10—14:25 Simulation Analysis on the High Temperature Creep of Continuous Furnace Roller Ying Zhang, Weize Wang, Lu Wang, Shantung Tu East China University of Science and Technology, China
14:25—14:40 Creep Damage Evaluation by Uniaxial Miniature Testing for Multiaxially Stressed Mod.9Cr-1Mo Steel Components Naoki Matsubara, Masao Sakane, Takamoto Itoh, Rui Kosaka Ritsumeikan University, Japan
14:40—14:55 Nanoindentation characterization of the cyclic softening and remaining creep behavior of P92 steel weldment Wei Zhang, Xiaowei Wang, Jianming Gong Nanjing Tech University, China
14:55—15:25 Coffee break
TECHNICAL SESSION XIII: Reliability-centered Manufacturing
Session chair:
13:30—13:55 Keynote lecture
Fatigue Property of Additively Manufactured Ti-6Al-4V under Non-proportional Multiaxial Loading Yuya Kimura, Fumio Ogawa, Takamoto Itoh Ritsumeikan University, Japan
13:55—14:15 Influence of relative density on the mechanical properties and deformation behavior of Ti6Al4V diamond lattice structure Yefeng Chen, Hang Liu, Jiaxi Zhao, Yang Zhou, Jianming Gong Nanjing Tech University, China
14:15—14:35 Structural optimization of buffer tank for LNG bus based on reliability
Zhengxiang Shen Ningbo Special Equipment Inspection and Research Institute, China
14:35—14:55 Microstructure and mechanical performance tailoring of titanium alloy fabricated by selective laser melting Libo Zhou, Jian Chen, Jianjun He, Cong Li, Wei Li, Weiying Huang Changsha University of Science and Technology, China
14:55—15:25 Coffee break
TECHNICAL SESSION XIV: Safety assessment
Session chair:
13:30—13:55 Keynote lecture
Quick analysis of limit load of bend pipe with thinning defect by using elastic modulus adjustment method Jianfeng Mao Zhejiang University of Technology, China
13:55—14:15 Effect of Bending Angle on Limit Load of Bend Pipe with Defects Jianfeng Mao Zhejiang University of Technology, China
14:15—14:35 Effect of thermal exposure on the microstructural evolution of HP40Nb alloy Chengming Fuyang, Yang Zhou, Bing Shao, Jinyan Chen, Luyang Geng, Jianming Gong Nanjing Tech University, China
14:35—14:55 Nondestructive life assesment based on carbide phase analysis of P92 steel Youjun Ye Special Equipment Safety Supervision and Inspection Institute ofJiangsuProvince, China
14:55—15:25 Coffee break
TECHNICAL SESSION XV: Mechanistic modeling
Session chair:
13:30—13:55 Keynote lecture
A modified deformation mechanism-based true-stress model of creep behaviors for SA508 Gr.3 steel over the temperature range of 800-1000°C Chuanyang Lu, Xijia Wu, Zengliang Gao, Rong Liu, Wenjian Zheng, Jianguo Yang Zhejiang University of Technology, China
13:55—14:15 Study on the Deformation Mechanism of Ti-2Al-2.5Zr Alloy Tube in the Flattening Test Shengkun Wang, Yuntao Wu, Xiao Liu, Gang Chen Tianjin University, China
14:15—14:35 Crack initiation and propagation in high-strength steel using a coupled stress-triaxiality-dependent damage viscoplasticity model Feng Yu, Shuxin Li Ningbo University, China
14:35—14:55 Optimized Welding Process of Residual Stress Control of P91 Steel Considering Martensitic Transformation Kai Yang, Yingjie Zhang, Zexun Hu, Jianping Zhao Nanjing Tech University, China
14:55—15:25 Coffee break
TECHNICAL SESSION XVI: Structural health monitoring
Session chair:
15:25—15:55 Keynote lecture
Real-time Visible Monitoring of Stress Distribution through Organic Mechanoluminescence Zhe Zhang, Le Zhang, Gang Chen, Xu Chen Tianjin University, China
15:55—16:20 Simultaneous measurement of torque and position of an electric motor operated valve actuator using fiber Bragg grating sensors embedded in the worm shaft Tao Li, Yun Tu, Xinhai Yu, Jian Zhang, Shantung Tu East China University of Science and Technology, China
16:20—16:45 Simulation Study on Magnetic Memory Detection of Buried Defects in Pressure Pipelines Liqin Cao, Hong Liang, Hongsheng Zhang Yanshan University, China
16:45—17:10 Detection and quantification of fatigue crack growth under high-frequency cyclic loading using acoustic emission entropy Mengyu Chai, Zaoxiao Zhang, Quan Duan
Xi'an Jiaotong University, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XVII: Constraint effect
Session chair:
15:25—15:55 Keynote lecture
Influence of strength mismatch on the effect range of material constraint Yue Dai, Jie Yang, Haofeng Chen
University of Shanghai for Science and Technology, China
15:55—16:20 Crack propagation behavior of 0.13C-5Mn medium manganese steel Fengluan Zhou AVIC Touthstone Testing Innovation (DaChang) Co.,Ltd, China
16:20—16:45 Study on T-stress of mixed model I-II crack of CCP specimen under compressive load Chenyang Yu, Lizhu Jin, Changyu Zhou, Xiaohua He Nanjing Tech University, China
16:45—17:10 Experimental and numerical study on CT specimen failure prediction using the innovative Gp method Han Liu, Mingya Chen, Samuel Jules EDF China, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XVIII: Creep-fatigue interaction
Session chair:
15:25—15:50 Keynote lecture
Modelling of Creep Cavitation under Creep-fatigue Interaction in Type
316 stainless steel
Bo Chen
University of Leicester, UK
15:50—16:10 Ratcheting and creep and their interactions for 9-12% Cr steel at
elevated temperature: Experiments and state-of-the-art constitutive
modeling
Shanglin Zhang Nuclear Power Institute of China, China
16:10—16:30 Investigation on the creep behavior of P92 steel after creep-fatigue
loading by nanoindentation
Yuxuan Song, Zengliang Gao, Yuebing Li, Yi Ma Zhejiang University of Technology, China
16:30—16:50 Investigation of indentation creep curves and steady state creep
parameters estimation method
Sisheng Yang, Wenbin Lu, Xiang Ling Nanjing Tech University, China
16:50—17:10 A Self-consistent Scheme for Modelling Creep Cavity Nucleation under
Creep-fatigue Interaction in Polycrystal
Jingdong Hu, Fuzhen Xuan, Changjun Liu, Bo Chen University of Leicester, UK
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XIX: Safety assessment
Session chair:
15:25—15:50 Keynote lecture
On high cycle low stress fatigue of welded joints
Yanhui Zhang Integrity management Group, TWI Limited, UK, UK
15:50—16:10 Assessment of X80 Pipeline Girth Weld Defects and Validation by Curved
Wide Plate Testing
Jian Chen, Fuxiang Wang, Lianshuang Dai, Zhengqiang Lei
PetroChina Pipeline Company, China 16:10—16:30 Unified constraint characterization and analysis for circumferential
internal surface cracks in pipes
Yifan Tian, Guozhen Wang
East China University of Science and Technology, China
16:30—16:50 Failure assessment curve of 2.25Cr-1Mo-0.25V steel considering temper
embrittlement
Lingrui Kong, Zhipeng Shen, Wei Fu, Hanhan Ma, Xiaochun Yu, Xiaohua He,
Changyu Zhou
Nanjing Tech University, China
16:50—17:10 Fracture Mechanical Evaluation of Reactor Pressure Vessel under Core
Meltdown Scenario
Jianfeng Mao
Zhejiang University of Technology, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XX: Material genetics
Session chair:
15:25—15:50 Keynote lecture
The impact of changes in microstructure of materials on the integrity of
plant components
Peter Flewitt University of Bristol, UK
15:50—16:10 Microstructure Evolution and the effect on mechanical properties of HR3C heat-resistant steel during long-term aging at 650°C Xiao Jin, Fangjie Shi, Yanfen Zhao, Fei Xue, Guodong Zhang Suzhou Nuclear Power Research Institute, China
16:10—16:30 Thermal stability of low-temperature gas carburized case of 316L
austenitic stainless steel under external loading
Zhe Liu, Song Zhang, Yawei Peng, Jianming Gong, Yong Jiang
East China Nanjing Tech University, China
16:30—16:50 Experimental Investigation of Post-fire Mechanical Properties of 12Cr1MoV Steel Jin Shi, Kaidi Cheng, Fakun Zhuang, Weize Wang, Shantung Tu East China University of Science and Technology, China
16:50—17:10 Hydrogen embrittlement of 304 austenitic stainless steels with different
grain sizes produced by combined severe cold-rolling and annealing
treatment
Honglin Xie, Yanfei Wang, Xuanpei Wu, Xinfeng Li, Zhiling Zhou, Jianming
Gong
China University of Mining and Technology, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XXI: Chemo-mechanical interaction
Session chair:
15:25—15:50 Keynote lecture
A numerical study of CMAS penetration effect on the TGO growth and interface stress behavior of APS TBCs Zhenwei Cai, Weizhe Wang, Yingzheng Liu, Xiaofeng Zhao Shanghai Jiao Tong University, China
15:50—16:10 The study on chemical degradation of proton exchange membrane in simulated PEM fuel cell environments Jiaran Liu, Chao Wang, Yang Li, Weizhan Yang, Jinzhu Tan Nanjing Tech University, China
16:10—16:30 Environmental influence factors of low cycle corrosion fatigue of nuclear grade 304L stainless steel in pure water environment of high temperature and high pressure Jian Cheng, Kewei Fang, Mingya Chen Suzhou Nuclear Power Research Institute, China
16:30—16:50 Effect of Chloride Impurity on Corrosion Behaviors of Stainless Steels in Molten Solar Salt: Experimental and Modeling Heng Li, Jianqun Tang, Jianming Gong Nanjing Tech University, China
16:50—17:10 Study on micro-area corrosion fatigue crack growth behavior of A7N01 aluminum alloy friction stir welded joints Chuanping Ma, Guozheng Kang, Xiaoli Che Southwest Jiaotong University, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
TECHNICAL SESSION XXII: Fatigue behavior
15:25—15:50 Keynote lecture
A unified direct method for ratchet and fatigue analysis of structures subjected to arbitrary cyclic thermal-mechanical load histories Haofeng Chen University of Strathclyde, UK
15:50—16:10 A Study on Evaluation of Multiaxial Fatigue Strength Under Combination of Axial Loading and Inner Pressure Using a Hollow Cylinder Specimen Kazuki Tajima, Yogesh Koomar Jagessur, Takamoto Itoh Ritsumeikan University, Japan
16:10—16:30 An in-situ study on fatigue cracking of GW103K alloy Rong Chen, Mingliang Zhu East China University of Science and Technology, China
16:30—16:50 Effects of Ultrasonic Surface Rolling Process on Fretting Fatigue Performance of Titanium Alloy Jinlong Zhu, Ning Wang, Xiancheng Zhang, Xiao Li, Jiamin Zhang, Shantung Tu East China University of Science and Technology, China
16:50—17:10 Numerical investigation of fatigue crack growth in proton exchange membranes under different loading conditions Yuxuan Wang, Xiang Guo, Shouwen Shi, Gang Chen Tianjin University, China
17:15— Social program (a group walking nearby Taihu Lake)
18:00— Buffet for Dinner
Day 3: detailed program
TECHNICAL SESSION XXIII: Microstructure-property relationship
Session chair:
08:00—08:25 Keynote lecture
Effect of grain boundary precipitation on aging brittleness of HR3C heat-resistant stainless steel Jie Zhao, Ailing Song Dalian University of Technology, China
08:25—08:45 Developing HR-DIC technique for near-tip strain characterization of
mode I and mixed mode cracks
Xiaokai Hu, Mingliang Zhu
East China University of Science and Technology, China
08:45—09:05 Cyclic deformation of a newly designed NiCrCo-based superalloy
Kaimeng Wang, Lianyong Xu, Lei Zhao Tianjin University, China
09:05—09:25 Different microstructural evolutions decreasing strengths of martensites
and bainites induced by low-cycle fatigue damage
Shuo Weng, Yuhui Huang, Fuzhen Xuan, Songlin Zheng University of Shanghai for Science and Technology, China
09:25—10:00 Coffee break
TECHNICAL SESSION XXIV: New testing method
Session chair:
08:00—08:25 Keynote lecture
Mechanism and method of testing fracture toughness and impact absorbed energy by indentation test Weiqiang Wang, Tairui Zhang, Jirui Cheng, Jianxun Li Shandong University, China
08:25—08:45 An Approach for Obtaining Material Mechanical Properties in Structure Local Region Based on An Accurate Analysis of Micro-indentation Test He Xue, Jinxuan He, Fuqiang Li, Meng Li, Pengfei Hou
Xi’an University of Science and Technology, China 08:45—09:05 A new method based on energy principle to predict uniaxial stress-strain
relations of ductile materials by hydraulic bulge testing
Oct 24, 2020
Shuang Qi, Lixun Cai Taishan Nuclear Power Joint Venture Co., Ltd., China
09:05—09:25 Evaluation of high cycle fatigue damage of impeller materials by ball
indenter indentation test
Jianxun Li, Weiqiang Wang, Tairui Zhang Shandong University, China
09:25—10:00 Coffee break
TECHNICAL SESSION XXV: Reliability-centered design
Session chair:
08:00—08:25 Keynote lecture
Establishing Methodology to Evaluate the Fracture Behaviour of Pipe Girth Welds under Plastic Straining Guiyi Wu, Longjie Wang, Shuyan Zhang Centre of Excellence for Advanced Materials, Dongguan, China
08:25—08:45 Global/local linked driven optimization of landing gear lower drag stay
Chengwei Fei, Haotian Liu
Fudan University, China 08:45—09:05 Fatigue Assessment and Optimization of the Small Pipeline by the Test
and FEA Simulation Mingya Chen, Lin Lei, Dahua Du, Weiqiang Wang Suzhou Nuclear Power Research Institute, China
09:05—09:25 Better contact pressure distribution of PEMFC under novel hydraulic clamping mechanism Jiaran Liu, Jinzhu Tan, Weizhan Yang, Yang Li, Chao Wang Nanjing Tech University, China
09:25—10:00 Coffee break
TECHNICAL SESSION XXVI: Life management
Session chair:
08:00—08:25 Keynote lecture
Analysis on microstructure and properties evolution and life prediction of P92 steel in high temperature service Xianxi Xia, Baoyin Zhu, Minjin Tang, Fei Xue, Jinhua Shi, Guodong Zhang Suzhou Nuclear Power Research Institute, China
08:25—08:45 Leakage Analysis of B Shape Ring Self-tight Seal in High Pressure
Polythene Polymerizer due to the Aging of Its Nonmetal Ring
Bingjun GAO
Hebei University of Technology, China
08:45—09:05 Analysis of the effects of temperature on bolted flange joints Lu Wang, Xuedong Chen, Zhichao Fan, Jilin Xue Hefei General Machinery Research Institute, China
09:05—09:25 Analysis of the effects of temperature on bolted flange joints Lu Wang, Xuedong Chen, Zhichao Fan, Jilin Xue Hefei General Machinery Research Institute, China
09:25—10:00 Coffee break
PLENARY SESSION V //Hehe Hall
Session chair:
10:00—10:30 Ratchetting and Ratchetting-fatigue interaction of polymers Prof Guozheng Kang Southwest Jiaotong University, China
10:30—11:00 Evaluation and Prediction of Long-term Service Performance of Nuclear Duplex Stainless Steels Based on Materials Genome Engineering Prof Fei Xue Suzhou Nuclear Power Research Institute, China
CLOSING CEREMONY //Hehe Hall
11:00—11:40 BEST PAPER/POSTER AWARDING chaired by Prof Mingliang Zhu
CONFERENCE SUMMARY by Prof Shan-Tung Tu
A list of posters
1) (Beijing Aeronautical Engineering Technical Research Center) Xiaomei Zheng, Tianyu Fan, Yantao Sun,
Zhizhong Fu. Application of Simulative Specimen in Aeroengine Critical Component Life Management.
2) (Beijing Aeronautical Engineering Technical Research Center) Yantao Sun, Xiaomei Zheng, Zhizhong Fu,
Hao Li, Xiuran He, Lei Zhou, Liwei Dong, Tianyu Fan, Shengliang Zhang, Wei Li. Life dispersion coefficient
for life determination of engine disk.
3) (China Institute of Atomic Energy) Guangsheng Ning, Weihua Zhong, Chenglong Wang, Bintao Yu, Wen
Yang. Fatigue model of domestic A508-3 steel under simulated primary coolant environment of AP1000.
4) [China University of Petroleum (East China)] Yun Luo, Qiang Zeng, Wenchun Jiang. Reduction on Repair
Welding Residual Stresses of Strip Cladding Plate by ultrasonic impact treatment
5) [China University of Petroleum (East China)] Xuefang Xie, Zhilong Dong, Wenchun Jiang. The Role of
Duplex-phases Structure on Cyclic Hardening Behavior of Duplex Stainless Steel 2205: Experimental and
Modeling.
6) [China University of Petroleum (East China)] Chuansheng Du, Ming Song, Bingying Wang, Wenchun Jiang.
Thermal stress analysis of multi-channel anode-supported planar solid oxide fuel cell.
7) [China University of Petroleum (East China)] Jianfei Chen, Bin Yang, Minglei Wang, Wenchun Jiang,
Zhenbo Wang. Characterization of degradation for mechanical properties of extended service CrMo steel
tube welded joints based on continuous ball indentation method.
8) (East China University of Science and Technology) Haitao Xu, Qi An, Honggang Miao, Tao Weng. Research
on Improving Tensioner’s Spindle’s Fatigue Life and Its Performance.
9) (East China University of Science and Technology) Honggang Miao, Haitao Xu, Tao Weng, Qi An. Force
analysis of spindle sleeve of cantilever automobile tensioning wheel with cylindrical spring.
10) (Nanjing Tech University) Luyang Geng, Jianqun Tang, Wei Wang. Studies on Fire-Induced Sensitization
and Mechanical Properties of 304 Stainless Steel by Thermal-Simulated Method.
11) (Nanjing Tech University) Yong Jiang, Ning sun, Yawei peng, Jianming gong. Thermal stability of low-
temperature-gaseous-carburization layer in 316L stainless steel.
12) (Shanghai Institute of Special Equipment Inspection and Technical Research) Jun Si. Experimental study
of low cycle fatigue of cold-stretched austenitic stainless steel S30408 under liquid nitrogen temperature.
13) [Shanghai Research Institute of Materials (SRIM)] Guangfu Li, Jun Hu, Cheng Zheng. Fatigue Crack
Nucleation and Growth Behaviors of Ni-based Alloy 690.
14) (Suzhou Nuclear Power Research Institute) Binfeng Wang. Research on Environmental Qualification
Management System of Electrical Equipment. 15) (Suzhou Nuclear Power Research Institute) Lei Lin, Yinli Liu, Zhongwei Zhang, Hongbo Gao, Decheng Xu.
Failure analysis of hydraulic snubbers in main steam system of nuclear power plant.
16) (Suzhou Nuclear Power Research Institute) Lei Lin, Mingya Chen, Hongbo Gao, Zhongwei Zhang, Fei Xue.
Failure Analysis of a Pneumatic Valve Position Feedback Rod in Nuclear Power Plant.
17) (Suzhou Nuclear Power Research Institute) Hongbo Gao, Mingya Chen, Yinli Liu, Weiwei Yu, Fei Xue, Lei
Lin. Environmental Fatigue Study of Charging Nozzle in Pressurized-water Reactor Based on Fluid-Solid
Interaction Method.
18) (Suzhou Nuclear Power Research Institute) Shuai Zhou, Lei Lin. Study on vibration fatigue of butt welds
of small bore stainless steel pipes.
19) (Suzhou Nuclear Power Research Institute) Yanwei Zhang, Mingya Chen, Guanghai Bai, Hongbo Gao,
Erwei Liu. Study on hoop tensile behavior of Zr alloy cladding tube using ring tensile test and finite
element analysis
20) (Suzhou Nuclear Power Research Institute) Yinli Liu, Lei Lin, Yanming Pu, Weiwei Yu, Fei Xue. Numerical
Study on the thermo-hydraulic characteristics of SG tube bundles.
21) (Suzhou Nuclear Power Research Institute) Wangjie Qian, Yingjun Xu, Xiangbing Liu, Guodong Zhang, Fei
Xue, Xiangjun Huang, Mingya Chen. Evaluation of Fatigue Damage in steels for Turbine Blades of Nuclear
Plant by Magnetic Barkhausen Noise.
22) (Tianjin University) Kai Song, Kun Zhou, Xingyue Sun. An enhanced multiaxial fatigue life prediction model
based on a data augmentation technique using the generative adversarial network.
23) (Xi'an Jiaotong University) Shuai Tang, Quan Duan. Criteria for vibration testing and rating of liquid
transport pipeline systems.
24) (Zhejiang University of Technology) Jianfeng Mao. Safety analysis on reactor pressure vessel with various
cracks under severe accident condition.
25) (Zhengzhou University) Ke Wang, Bo An, Yongqing Wang. Thermal stress analysis of solid oxide fuel cell.
Schedule of ISSI2020
Day Time Event Oct 21 10:00—22:00 Registration Oct 22 08:30—08:50 Conference opening
08:50—12:00 Plenary lectures 12:00— Lunch 14:00—17:30 Plenary lectures 18:30—20:30 Conference dinner
Oct 23 08:30—12:10 Technical sessions 12:10— Lunch 13:30—17:10 Technical sessions 17:15—18:15 Social program (a group walking) 18:00— Buffet for dinner
Oct 24 08:00—09:25 Technical sessions 10:00—11:00 Plenary lectures 11:00—11:40 Closing ceremony Afternoon Technical visiting (some participants only)
End