tentative program 7-01-2014 mod jdm
DESCRIPTION
LAPAMS ProgrammeTRANSCRIPT
14th JanuaryWelcome Dinner and Registration (7.30 PM onwards)
15th January, 20158.00 hrs
OnwardsRegistration
9.00-10.00 hrs Inauguration
Ceremonial Inauguration by Lighting the Lamp Welcome address by Prof. Manna, Conference ChairmanWelcome address by Prof. G. G. Roy, HOD, Dept. of Met. & Mat. Welcome address by Prof. P K Das, HOD, Dept. of Mech. Engg., IIT Kharagpur Welcome address by Prof Amara, CDTA, Convener Conference details by Prof. J. Dutta Majumdar, Convener Address by the Guest of Honor, Prof. A. K. Roy, Director, IIEST, ShibpurAddress by the Chief Guest, Prof. P. P. Chakrabarti, Director, IIT KharagpurVote of Thanks by Prof. A. Roy Choudhury, Convener
Plenary Session – I : Materials ProcessingSession Chairs: Prof. N. B. Dahotre
Prof. M. Chakrabarti10.00 – 10.15 hrs Lecture – PL1 (LAPAMS-4)
Prof. I. Manna
Laser and Plasma Application in Materials Science
10.15–10.55 hrsLecture – PL2 (LAPAMS-1)
Prof. S. Banerjee
Laser and Electron Beam Joining and Cladding for the Components used in Advanced NuclearReactors
10.55–11.35 hrs Lecture – PL3 (LAPAMS-7)
Dr. A. Weisheit, ILT, Aachen
Laser Additive Manufacturing of TiAl and FeAl Intermetallics
11.35-12.15 Lecture – PL4 (LAPAMS-8)
Prof. Christian Andreas Wetzig
New Progress in Laser Cutting
Inauguration of Exhibition and Poster Session: 12.15 – 12.30 hrs
LUNCH BREAK: 12.30-13.30 hrsLaser Material Processing I
Session Chair: Prof. S. Chatterjee, IIEST
Plasma Materials ProcessingSession Chair: Mr. Stefen Akinlabi
13.30-13.55 hrs Lecture – KL1 (LAPAMS-15)
Dr. G. K. Dey, BARC, Bombay
Understanding solidification of alloysthrough study of structure of amorphous
alloys and glass/ crystal composites
Lecture – KL2 (LAPAMS-38)
Dr. R.M. MohantyCSIR, N. Delhi
Thermo-mechanical environment andadvantage of thermal plasma in
manufacturing complex components &engineering structure
13.55-14.20 hrs Lecture – KL3 (LAPAMS-31)
Dr. Johannes Proll, KIT, Germany
Perspectives of Laser Materials Processing forthe Manufacturing of Lithium-Ion Batteries
Lecture – KL4 (LAPAMS-28)
Dr. B. B. Jha, IMMT, Bhubaneswar
Laser and Plasma: Important tools forprocessing and fabrication of metallic and
ceramic foams
14.20-14.45 hrs Lecture- KL5 (LAPAMS-50)
Dr. S. C. Sharma, VSSC, Trivandrum
Laser and Plasma based Emerging MaterialProcessing Technologies for Strategic
Sectors : A Vista
Lecture – KL6 (LAPAMS-57)
S. Dash, IGCAR, Kalpakkam
Plasma Assisted Reactive Processing of Coatings
Break: 14.45 -15.00 hrsLaser in Material Processing-II
(Session Chair: Prof. Cebolenkosi Philani Ntuli, TshwaneUniversity of Technology, Pretoria, South
Africa)
Laser Ablation/deposition-I (Session Chair: Mr. Stefen Akinlabi,
University of Johannesberg, South Africa)
15.00-15.25 hrs Lecture – KL7 (LAPAMS-42) Lecture-KL8 (LAPAMS-18)
Prof. Sarat Singamneni, AUT University Auckland, New Zealand.
Selective laser sintering of Bio-compositematerial
Dr. E. L. Gurevich, University of Bochum,Germany
Selective ablation of thin films by ultrashortlaser pulses for organic photovoltaics
15.25 -15.50 hrs Lecture-KL9 (LAPAMS-29)
Dr. G. Padmanabhan, ARCI, Hyderabad
Materials joining and repair with lasers
Lecture-KL10 (LAPAMS-33)
Prof. Rajdeep Singh Rawat, NanyangTechnological University, Singapore
Nanophase magnetic Material Synthesis UsingPulsed Laser Deposition And Plasma Focus:
Issues, Challenges And Scope
15.50 -15.05 hrs Lecture- IL1 (LAPAMS-16)
Dr. Gururaj Telasang, ARCI Hyderabad
Evaluation of Laser Assisted MaterialDeposition for Refurbishment of Pressure Die
Casting Die Components in Simulated andActual Conditions
Lecture- IL2 (LAPAMS-)
Mr. S. Nath
Microstructural Characterization of YttriaStabilized Zirconia Thin Film
Developed by Pulsed Laser Deposition
15.05-15.20 pm Lecture- IL3 (LAPAMS-16)
Manish Tak, ARCI, Hyderabad
Study on the influence of pre-heating oncracking susceptibility in laser-clad coatings of
NiCr on austenitic stainless steel
Lecture- IL4 (LAPAMS-16)
Dr. Subrata kumar, IIT Patna
Statistical and Analytical Approaches forDepth and Profile Prediction in CO2 Laser
Microchanneling on Polymethyl Methacrylate(PMMA)
Tea Break: 15.20 pm to 16.00 hrs
16.00 -16.25 hrs Lecture-KL11 (LAPAMS-49)
Pratik Shukla
Laser Sealing of HDLPE Film To PP Substrate
Lecture-KL12 (LAPAMS-62)
Dr. David Waugh, University of Chester
Laser Surface Induced Roughening ofPolymeric Materials And The Effects on
Wettability Characteristics
16.25 – 16.50 hrsLecture-KL13 (LAPAMS-65)
Prof. G. G. Roy, IIT Kharagpur
Impact and Significance of Convective HeatTransfer Calculations in Welding
KL14Dr. B. Subramanium, CECRI, KadarkudiLaser Ablation And Plasma Processing For
Biomedical Applications
16.50 – 17.05 hrs Lecture-IL5 (LAPAMS-67)
Prof. Cebolenkosi Philani Ntuli, TshwaneUniversity of Technology, Pretoria, South
Africa.
Thermal Modeling of the Pulsed LaserAblation of Silicon Nitride Ceramics
Lecture-IL6 (LAPAMS-23)
Ms. Bathusile Masina, CSIR, Pretoria
Structured light for enhanced light-matterinteractions
Break: 17.05-17.15 hrs Short Oral/Poster PresentationOn Laser Materials Processing
(16.00 to 16.30)Session Judges: Dr. Sisa Pityana, Dr. Pratik
Shukla, Dr. Lerato Criscelda Tshabalala,Prof. S. C. Singh
Short Oral/Poster PresentationOn Plasma Materials Processing
(16.00 to 16.30)Session Judges: Dr. Johannes Proel, Prof.Cebolenkosi Philani Ntuli, Dr. S. Allami,
Dr. R. K. Jha17.15 - 17.20 hrs CL-1 (LAPAMS-83)
Mr. N. Roy
Experimental Investigation of SubmergedLaser beam cutting on Inconel 625 Superalloy
CL-2 (LAPAMS-70)
Ms. Mayuri Baruah
Analysis of Micro Plasma Welded Ti6Al4VSheets
17.20 - 17.25 hrs CL-3 (LAPAMS-87)
Mr. N. Sivagurumanikandan
Nd:YAG laser butt welding of super duplexstainless steel
CL-4 (LAPAMS-68)
Mr. Prince Alex
Effect of Ion Induced SEEC from CathodeMaterial on Formation of Multiple Double
Layers in Diode Plasma17.25 – 17.30 hrs CL-5 (LAPAMS-82)
D. Narsimhachary
CL-6 (LAPAMS-75)
Mr. Debjit Ghosal
Modelling of laser welding of aluminium alloy6061 T6
Role of Plasma in Surface Modification forPolymer Substrates (PVC) and Study of
Ageing Characteristics17.30 – 17.35 hrs CL
Vatsala Chaturbedi
A Study on the Effect of Plama Nitriding onH13 Tool Steel
CL-8 (LAPAMS-74)
Mr. Balmukund Dhakar
A Study on Phase Stabilization andcharacterization of Plasma Sprayed Al2O3-
Cr2O3 Composite Coatings
17.35 - 17.40 hrs CL-9 (LAPAMS-81)
Mr. Suvradip Mullick
Effect of Vapour Plasma in Water-jet AssistedUnderwater Laser Cutting Process
CL-10 (LAPAMS-78)
Ms. Renu Kumari
Microstructural Characterization of HA/TiO2composite coating on Titanium Based Alloy
(Ti-6Al-4V) for Bio-implant Application17.40 - 17.45 hrs CL-11 (LAPAMS-85)
Mr. A. Sen
Fibre Laser Micro-Machining of PolymethylMethacrylate (PMMA)
CL-12 (LAPAMS-80)
Mr. Soumen Mondal
A study on porosity in material deposition byPTAW process
17.45 -17.50 hrs CL-13 (LAPAMS-73)
Mr. Partho Pratim Chatterjee
Use of Laser-Matter Interaction for StructuralModification to enhance the Efficiency of
Photovoltaic devices
CL-14 (LAPAMS-89)
Ravi Kant
Experimental Studies on Laser Bending ofMagnesium M1A Alloy Sheets
17.55-18.00 hrs CL-15 (LAPAMS-84)
Mr. Subhamoy Singha Roy
The Simple theoretical Analysis of QuantumWell Wires Superlattice of Communication
Laser
CL-16 (LAPAMS-88)
Ms. Shaila Thakur
Surface energy improvement of Polyurethanesubstrates by RF plasma treatment with
different gases18.00-18.05 hrs CL-17 (LAPAMS-79)
Arun Kumar
Microstructural Characterization of PlasmaNitrided and Nitrogen Ion Implanted Ti-6Al-4V Sputter Deposited on AISI 316L Stainless
Steel
CL-18 (LAPAMS-76)
Mr. Muvvala Gopinath
Effect of Pulse Width on Clad Track Geometryand Surface
Roughness in Pre-placed Powder LaserCladding of Inconel 718
18.05-18.10 hrs CL-19 (LAPAMS-86)
Sumit K. Sharma, IIT Kharagpur
CL-20 (LAPAMS-69)
Sharat Anishetty, IIT Kharagpur
Surface Engineering of Inconel 718 forImproved Wear and High Temperature
Oxidation Resistance
Microstructural Characterization andProperties Evaluation of
Bead-on-Plate Welded (Zr-4)18.10-18.15 hrs CL-21 (LAPAMS-69)
Mutiu F. Erinosho, University OfJohannesburg, Johannesburg, South Africa
Microstructures and Dry Sliding WearCharacteristics of the Laser Metal Deposited
Ti6Al4V/Cu Composites
CL-22 (LAPAMS-69)
N.M. Baloyi
Corrosion and Wear Behavior of LaserDeposited ZrO2 and ZrC Powder Beds
Tea Break: 18.15 to 18.30
18.30: Poster session (18.30 to 19.30)
Cultural Program: 19.30 – 20.00 pmGala Dinner: 20.00 – 22.00 pm
16th January, 2015
08.30 -9.10 hrs Session Chairs: Prof. I. MannaProf.
Lecture – PL5 (LAPAMS-2)
Prof. Narendra B. Dahotre
Laser Surface Engineering
9.10 -09.50 hrs Lecture – PL6 (LAPAMS-6)
Prof. J. Lawrence University of Chester, UK
Surface Glazing of Concrete Using Lasers for Protection and Decommissioning
09.50-10.30 hrs Lecture – PL7 (LAPAMS-6)
Prof. Tetsuo Tsuchiya
Metal oxide thin film for new devices grown by excimer laser assisted metal organic deposition(ELAMOD)
10.30 -11.10 hrs Lecture – PL8 (LAPAMS-5)(Dr G. Sundararajan)
Plasma Electrolytic Oxidation : A Unique Surface Engineering Technique
TEA BREAK: 11.10-11.30 hrs
Surface Engineering - ISession Chair: Prof. S. K. Roy
Laser Material Processing-IIISession Chair: Prof. D. Waugh, Univ.
Chester11.30 -11.55 hrs Lecture-K15 (LAPAMS-36)
Dr. Manish Roy, DMRL Hyderabad
Nanotribology of Self-Lubricating FilmsObtained by Plasma Assisted Deposition
Lecture-K16 (LAPAMS-36)
Dr. Serhii TkachenkoBrno University Of Technology, Faculty OfMechanical Engineering, Technická 2896/2,
616 69 Brno, Czech Republic
Electron beam surface modification of Ti−Sibased alloys
11.55 – 12.20 hrs Lecture-K17 (LAPAMS-20)
K. Biswas
Hot Corrosion And Thermal CyclingBehaviour of Plasma Sprayed LanthanumHexaaluminate Based Advanced Thermal
Barrier Coatings
Lecture-K18 (LAPAMS-37)Prof. J. Dutta Majumdar,
I. I. T. Kharagpur
Laser Assisted Surface Designing of Ti-6Al-4V for Bio-implant Application
12.20 -12. 35 Lecture – IL9 (LAPAMS-60)
Prashant Sharma, IIT Kharagpur
Studies on Characteristics of Plasma SprayedLa2O3 –Y2O3-ZrO2 Thermal Barrier Coating on
Ni-Based Superalloys-718
Lecture – IL10 (LAPAMS-53)
G. Kibria, Aliah University, Kolkata, India
Generation of Defined Rough Micro-TurningSurface on Aluminum Oxide (Al2O3) CeramicsDuring Pulsed Nd:YAG Laser Micro-Turning
Process
LUNCH BREAK: 12.35 to 13.30
13.30 – 13.55 hrs Lecture- KL33 (LAPAMS-25)
B. Patel
Lecture- KL36 (LAPAMS-44)
Icon Analytical Ltd.
13.55 – 14.20 hrs Lecture-K19 (LAPAMS-20)
Dr. D. P. Mondal, AMPRI, Bhopal
Laser And Plasma :Important Tools ForProcessing And Fabrication Of Metallic And
Ceramic Foams
Lecture-K20 (LAPAMS-20)
A.K. Jha, VSSC, Trivandrum
Materials Failure and Role of Laser in itsPrevention
14.20 –14.35 hrs Lecture-IL117 (LAPAMS-55)
Prof. K. Mondal, IIT Kanpur
Corrosion Behavior of In-situ Ball Milled andAtmospheric Plasma Sprayed Ni-Ti Coating on
Mild Steel
Lecture – IL8 (LAPAMS-63)
Dr. R. Singh, NML, Jamshedpur
Corrosion and Cavitation Erosion Resistanceof Laser Processed Stainless Steel 13Cr-4Ni
and AISI 304
14.35 -14.50 hrsMr. K. Singh, IGCAR, Kalpakkam
Effect of Substrate Temperature on theMicrostructure of RF Magneto-sputtered Mo
Thin Films
Lecture – IL15 (LAPAMS-54)
Mr. Yuvraj K. Madhukar
Some salient features of water-jet assisted laserprocessing
Lunch Break: 15.30 – 16.00 hrs
Modeling & Simulation-IISession Chair: Prof. P. P. Chattopadhyay, IIEST, Shibpur
Laser, Plasma and Electron Beam inDefense Sectors
Session Chair: Dr. Manish Roy
14.50-15.15 hrs Lecture-KL17 (LAPAMS-9) Lecture-KL18 (LAPAMS-35)
Dr. El-Hachemi Amara, CDTA, Algeria
Laser Cutting Modeling
Dr. G. Madhusudhan Reddy, DMRL,Hyderabad
Influence of Electron and laser beamoscillation and pulsing techniques onmicrostructure and high temperature
mechanical properties of Inconel 718 welds15.15-15.40 hrs Lecture-KL19 (LAPAMS-43)
A. K. Nath
Lecture-KL20 (LAPAMS-13)
Dr. D.K. Das, DMRL, Hyderabad
Potential Use of Femtosecond Lasers for GasTurbine Engine Applications
15.40 -16.05 hrs Lecture-KL28 (LAPAMS-10)
Stefen Akinlabi
Process Parameter Optimization for LaserMetal Deposited Ti6Al4V/TiC Composites
Lecture-KL22 (LAPAMS-41)
Dr. R. C. Sharma, DRDO, Delhi
Laser Technology for Defense Application
16.05-16.20 ILSitanshu Chakraborty
C. Laser Forming of Bowl Shaped Surfacewith a Stationary Laser Beam
Lecture-IL18 (LAPAMS-46)
K. Biswas, IIT K
16.20-16.35 hrs Lecture-IL16 (LAPAMS-58)
Prof. I. A. Palani, IIT Indore
Influence of Laser Annealing on LaserAdditive Manufactured shape Memory
Structures of NiTi alloys
Lecture-IL17 (LAPAMS-52)
Mr. Jyotirmoy Kar
Effect of Beam Oscillation on Electron BeamWelding of AISI-316L Joints
BREAK: 16.25-16.40
Surface Engineering - ISession Chair: Dr. S. Pityana)
Surface Engineering - II(Dr. S. Allami)
16.40-17.05 hrs Lecture-KL23 (LAPAMS-12)
Prof. Rajarshi Banerjee
Laser Additive Processing of ImplantableBiomaterials and Novel Metal Matrix
Composites
Lecture-KL24 (LAPAMS-27)
Dr. U. Kamachi Mudali
Development of Ceramic Coatings for MoltenSalt and Uranium Environment
17.05- 17.20 hrsLecture- KL31 (LAPAMS-22)
Prof. C. S. Kumar, IIT Kharagpur
Process Control for Metallurgical andMechanical Properties Variation in
Lecture-KL26 (LAPAMS-32)
Prof. V.S. Raja, IIT Bombay
Role of architecture of the hot corrosionresistance of thermal barrier coatings
17.20 - 17.45 hrs Lecture-KL27 (LAPAMS-30)
Sisa Pityana
Characterising the Effect of Laser Metal Deposited Ti6al4v/Cu Composites in Simulated Body Fluid for Biomedical Application.
IL
M. Das, CGCRI, Kolkata Laser Processing of Discontinuously
Reinforced Titanium Matrix CompositeCoatings
17.45-18.10 hrs Lecture-IL20 (LAPAMS-51)
Fatoba Olawale Samuel, TshwaneUniversity of Technology, Pretoria, South
Africa.
Corrosion Behaviour of Laser Alloyed UNSG10170 Steel with Zn+Sn Powders
Lecture-IL21 (LAPAMS-47)
A. Basu, NIT, Raurkela
Corrosion Resistance Improvement Of HighCarbon Low Alloy Steel By Plasma Nitridin
18.10 –18.25 hrs Dr. Lerato Criscelda Tshabalala, TshwaneUniversity Of Technology, Pretoria,
South Africa
Laser-Ceramic Interaction Of Sialon-Si3N4During Femtosecond Pulsed Laser Ablation
g
Dinner: 19.00-21.00 hrs
17th January, 2015Laser Micro-Processing –IV
(Session Chair: Dr. Pratik Shukla)Laser Ablation/Deposition
(Dr. E. Gurevich)
08.30 – 08.55 hrs Lecture- KL29 (LAPAMS-21)
Prof. L. M. Kukreja
Lecture- KL30 (LAPAMS-33)
Prof. S. K. Ray, IIT Kharagpur
Laser Additive Manufacturing and ShockPeening: A perspective
Plasma and Laser Assisted Growth ofSemiconductor Hetero and Nanostructures
08.55 -09.20 hrsA. K. Bhadra
Lecture- KL32 (LAPAMS-24)
Prof. R. Mitra, IIT Kharagpur
Structure-Property Relations in Reactively Co-Sputtered Ni-TiN Nanocomposite Thin Films
09.20-09.35 hrs
IL
Mukul Shukla
Microstructural Evolution tephen AkinlabiDuring Laser Forming of Steel Sheet
Lecture- KL34 (LAPAMS-17)
S. Ghosh Choudhury, NML, Jamshedpur
Evolution Of Stress In Polycrystalline Ti ThinFilm Developed By Sputtering And Associated
Phase Transformation
09.35-9.50 hrsIL
Ram KumarIIT Kanpur
IL
Sonik BhatiaVaried Effect on Optical Properties of Zinc
Oxide films Prepared by Different Techniques
Valedictory Session and High Tea: 10.00 to 11.00 PM