tender specification bhel: pssr: sct: 1814 · technique by tripod and mechanical winch machine all...

TENDER SPECIFICATION BHEL: PSSR: SCT: 1814

FOR

Civil, Structural, Architectural, Electrical & Other allied works

for “INTEGRATED OFFICE COMPLEX OF BHEL AT PALLIKARANAI, CHENNAI-600100, KANCHIPURAM DISTRICT,

TAMILNADU”

VOLUME-II

PRICE BID Rev-01

BHARAT HEAVY ELECTRICALS LIMITED (A Government of India Undertaking)

Power Sector – Southern Region 690, Anna Salai, Nandanam, Chennai – 600 035.

PRICE BID Rev-01

Tender Specification No.: BHEL PSSR SCT 1814

TENDER SPECIFICATION CONSISTS OF

Techno-Commercial Bid Volume- I

Book-I

Notice Inviting Tender Volume-IA: Technical Conditions of Contract Part I Part II

Specific Conditions of this Contract (SCTC) Book-II

Volume-IB: Special conditions of Contract, Rev 01 dated 1st June 2012,

Amendment 01 dated October 01, 2015

Volume-IC: General conditions of Contract Rev 01 dated 1st June 2012,


Volume-ID: Forms & Procedures Rev 01 dated 1st June 2012


Volume-II: Price bid Rev-01

PRICE BID Rev-01


CONTENTS

Description No. of pages

Part A: Instructions to the Bidders 1

Part B: Format to quote total amount 1

Part C: Bill of quantities with weightage for amount of each items w.r.t. the total quoted price

176

PRICE BID Rev-01


PART-A-INSTRUCTIONS TO BIDDERS:

1. The ‘Total amount’ mentioned in Part-B of the Price Bid Rev-01 corresponds to the entire Bill of Quantities (BOQ) given in Part -C of the Price Bid Rev-01.

2. Bidders shall quote ‘Total Amount’ in the format for Price Bid Rev-01 available in the e procurement portal.

Bidders may also quote ‘Total Amount’ in the format given in Part -B of this document (Optional).

Any other entry elsewhere in the price bid Rev-01 shall be treated as Null and Void.

3. BHEL has pre-fixed the weightages for the amount of individual items of Bill of Quantity with respect to the ‘Total Amount’ in Part-C.

4. Based on the pre-fixed weightages, the amount for the individual items of the Bill of Quantity shall be arrived at. This amount shall be rounded off to the nearest rupee.

5. Based on the quantities of individual item and the amount arrived in Sl No: 4 above, unit rate of individual items shall be derived. This unit rate shall be rounded off to four decimal places.

6. Bidders to note that this is an item rate contract. Payment shall be made for the actual quantities of work executed at the unit rate arrived at as per Sl No.5 above.

Part B: Format to quote Total Amount

Tender Specification BHEL:PSSR:SCT:1814 R1 for Civil Works - Foundations, Civil works-Super structure& architectureworks, interior works, furnitures, electricals, stp, wtp, ac, fire protection, pumps, Pile and Pile Caps, Structural Steel

Fabrication & Erection works

at Integrated Office Complex of BHEL at Pallikaranai, Chennai - 600100

Total Amount for the entire Bill of Quantities(BOQ) given in Part C

In Figures

In words

Note :Bidders to quote Total Amount in this format given above, which shall be taken into account for evaluation and awarding and hence, shall be complete in all respect for the full scope definedin specification and in accordance with all terms & conditions of tender.

Date SIGNATURE OF BIDDER WITH SEAL

Part C : Bill of Quantities



at Integrated Office Complex of BHEL at Pallikaranai, Chennai - 600100Ref.No. Description Unit of

MeasurementQty. Weightage for amount of

each item (Nearest to the 7decimal points) w.r.t the

total amount

100.0 PILE FOUNDATION --

101.0 Boring, providing and installation bored cast-in-situ reinforced cement concrete piles ofgrade M-25 of specified diameter and length below the pile cap, to carry a safe workingload not less than specified, excluding the cost of steel reinforcement but including thecost of boring with bentonite solution and temporary casing of appropriate length forsetting out and removal of same and the length of the pile to be embedded in the pilecap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chiseltechnique by tripod and mechanical Winch Machine all complete, including removal ofexcavated earth with all its lifts and leads Truck Mounted rotary/TMR/Tubewell boringmachine shall not be used (length of pile for payment shall be measured up to bottom ofpile cap).Note:- Minimum Cement content shall be 400 kg/cum. Reinforcementrequired for the piling works shall be supplied by BHEL free of cost and reinforcementwork shall be paid in relevent item. Crushed stone may be used for concreting.

--

a 600 dia Rm 1,037 .0097346

b 450 dia Rm 808 .0047165

102.0 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installationof loading platform by Kentledge/ Anchor piles method and preparation of pile head orconstruction of test cap and dismantling of test cap after test etc. compete as perspecification & the direction of engineer in-chargeNote:1 -Routine load test shall not be carried out by dynamic method of testing.Note:2 - Testing agency shall submit the design of loading platform for the approval ofEngineer In-Charge.For 600mm dia & 450 mm dia piles

--

b Routine test Nos 2 .0001966

1 SIGNATURE OF BIDDER WITH SEAL







total amount

103.0 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (PartIV) for determining safe allowable lateral load on pile For 600mm dia & 450 mm diapiles

--

a Routine test Nos 2 .0002018

104.0 Integrity testing of pile using low strain/ sonic integrity test / sonic echo test method inaccordance with IS 14893 incluidng surface preparation of pile top by removing soil,mud, dust & chipping lean concrete lumps etc. and use of computerised equipment andhigh skill trained personnel for conducting the test & submission of results, all completeas per direction of Engineer In-Chrage.Note:- The inclusion of the above item in the schedule of work shall be judiciouslydecided by the technical sanctioning authority, keeping in view the quality control, typeof soil strata & importance of the project.

per test 10 .0000276

200.0 EARTHWORK --

201.0 Supplying and filling sand upto any depth under floors, around foundations, plinths etc.in layers not exceeding 250 mm thickness and compacted so as to achieve at least 80%relative density as per IS-2720 (Part-XIV) including spreading, watering,ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. allcomplete

Cum 215 .0023267

202.0 Earth work in excavation by mechanical means (Hydraulic excavator) /manual meansover areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lift upto 1.5m, disposed earth to be levelled andneatly dressed The rate includes disposal of excess unused earth away from site,dewatering, pumping water, strutting, shoring etc

--

a 0m to 1.5m Cum 2,889 .0013391

b 1.5 to 3m Cum 2,243 .0014666








total amount

c 3m to 4.5m (ordinary rock) Cum 633 .0006414

d 3m to 4.5m (Hard rock) Cum 20 .0000639

203.0 Providing and injecting anti-termite pre-construction chemical treatment using suitableemulsiable concentrates (ALDRIN is banned) at the rate of 7.5 Lts/sqm as per IS 6313to column pits, wall trenches, Basement excavations, Top surface of plinth filling,Junction of wall and floor, soil along external perimeters of building expansion joints(Treatment to be governed by 10 years guarantee).Treatment to be non polluting andshould not affect ground water.

Sq m 1,105 .0005364

204.0 Refilling in basement and surrounding of the site with excess earth available afterrefilling the foundation and well watered consolidation the same in layers not exceeding200mm depth, filling the remaining low level areas and in basement in layer of 200mmdepth including watering and consolidating as directed by the Engineer in charge of thework.

Cum 1,546 .00101

205.0 Supplying and filling with earth of approved quality brought from barrow areas inlayers of 200mm thick including cost of earth, transportation for all leads, loading,unloading, spreading in layers at all depths, watering compacting as per relevant IScode to 90% max dry density etc as directed.

Cum 7,865 .0222583

206.0 TRENCH EXCAVATION - Excavating trenches of required width for pipes, cables,etc including excavation for sockets, and dressing of sides, ramming of bottoms,depthupto 1.5 m, including getting out the excavated soil, and then depth upto 1.5 m,including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer byramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m : All kinds of soil:

--

a Pipes, cables etc, not exceeding 80 mm dia. rmt 203 .0001031

b Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia rmt 203 .00016843 SIGNATURE OF BIDDER WITH SEAL







total amount

c Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm rmt 53 .0000687

207.0 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depthexceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item fordepth upto 1.5 metre).

Cum 40 .0000258

300.0 CONCRETE - Cement is in the scope of contractor.Crushed stone sand can be used for concreting works.

--

301.0 Providing and laying Plain cement Concrete 1 : 3 : 6 (one part of cement, three part ofsand and six parts of good approved 20mm HBG jelly) , well mixed and placed inposition and consolidated by rammer. Note:-Minimum Cement content shall be 220kg/cum

Cum 196 .0040036

302.0 Providing and laying in position ready mixed M-30 grade concrete for reinforcedcement concrete work, using cement content as per approved design mix, manufacturedin fully automatic batching plant and transported to site of work in transit mixer for allleads, having continuous agitated mixer, manufactured as per mix design of specifiedgrade for reinforced cement concrete work, including pumping of R.M.C. from transitmixer to site of laying , excluding the cost of centering, shuttering finishing andreinforcement, including cost of admixtures in recommended proportions as per IS :9103 to accelerate/ retard setting of concrete, improve workability without impairingstrength and durability as per direction of the Engineer -in-charge. Note:-MinimumCement content shall be 340 kg/cum

--

a Pile cap & Beam Cum 228 .0061647








total amount

303.0 Providing and laying in position ready mixed grade concrete for reinforced cementconcrete work, using cement content as per approved design mix, manufactured in fullyautomatic batching plant and transported to site of work in transit mixer for all leads,having continuous agitated mixer, manufactured as per mix design of specified gradefor reinforced cement concrete work, including pumping of R.M.C. from transit mixerto site of laying , excluding the cost of centering, shuttering finishing andreinforcement, including cost of admixtures in recommended proportions as per IS :9103 to accelerate/ retard setting of concrete, improve workability without impairingstrength and durability as per direction of the Engineer-in-charge. Note:-Cementcontent considered in this item is @ 340 kg/cum, Flyash confirming to IS 3812 (Part 1)as part of replacement of OPC as IS 456 to be used

--

a R.C.C M30 in column from Basement 1 to Fifth floor Cum 295 .0087459

b R.C.C M30 in column from sixth floor to Seventh floor Cu m 99 .0030197

c R.C.C M30 in footings, wall below ground level cum 125 .0033362

d R.C.C M30 in column in foundation and in wall cum 28 .0007473

e R.C.C M30 in plinth beam. cum 3 .0000801

i M30 grade - R.C.C Roof slab of underground sump Cum 16 .000427

304.0 Column drop panel Cum 472 .014397

305.0 R.C.C ROOF SLAB: --

-- R.C.C M30 grade in slabs over in: --

a upto V Level Cum 1,876 .0556182








total amount

b above V Level Cu m 416 .0126889

306.0 R.C.C ROOF BEAM: --

-- R.C.C M30 grade in beams over in: --

a upto V Level Cu m 228 .0067596

b above V Level Cu m 68 .0020741

307.0 R.C.C STAIRCASE: --

-- R.C.C M30 grade in staircase waist slab : --

a RCC for Staircase, ramps Cu m 81 .0024014

308.0 R.C.C WALL --

-- R.C.C M30 grade in walls --

a RCC Lift wall ,Retaining wall and locker walls Cu m 486 .0144086

309.0 R.C.C LINTELS - M30 grade Cu m 12 .0003558

310.0 Providing and laying brick jelly cement concrete 1:4:8 (one part of cement:four part ofsand,free from foreigh impurities:eight parts of brocken brick jelly of 20mm size) freefrom dust and powder in sunken portions of toilets all as directed by the architects anddrawings etc. complete. The rate include plastering the sides and bottom of the toilerslab with water proofing compoung such as conbex 100/ cera I.W.P / cica etc. at 2% byweight of cement or as per the manufacturers specifications, all as directed by engineer-in-charge.

--








total amount

a upto V Level Cum 42 .0005539

b above V Level Cum 30 .0004213

311.0 CORE CUTTING --

a 100mm dia Nos 20 .000181

b 150mm dia Nos 20 .0002303

c 200mm dia Nos 20 .0002303

312.0 OVER HEAD TANK (FIRE & DOMESTIC) - Providing and laying in position readymixed grade concrete for reinforced cement concrete work, using fly ash and cementcontent as per approved design mix, and manufactured in fully automatic batching plantand transported to site of work in transit mixer for all leads, having continuous agitatedmixer, manufactured as per mix design of specified grade for reinforced cementconcrete work, including pumping of R.M.C. from transit mixer to site of laying,including the cost of centering, shuttering, finishing and reinforcement, including costof admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting

--

a For Columns, Base slab,Cover slab & Bottom beam ( M30 ) Cum 26 .0007931

313.0 KERB STONE - Providing and laying at or near ground level factory made kerb stoneof M-25 grade cement concrete in position to the required line, level and curvature,25grade cement concrete in position to the required line, level and curvature, joints withor without grooves (thickness of joints except at sharp curve shall not to more than5mm), including making drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shall be measured forpayment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Cu m 26 .0004868








total amount

314.0 PAVER BLOCK - Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M -30 grade made by block making machine with strongvibratory compaction, of approved size, design & shape, laid in required colour andpattern over and including 50mm thick compacted bed of sand, filling the joints withfine sand etc. all complete as per the direction of Engineer-in-charge.

Sq m 1,610 .0042044

315.0 SCREED CONCRETE - Providing and laying in position cement concrete of specifiedgrade including the cost of shuttering-at all floors. The ratio of CM 1:2:4 (1 cement : 2sand : 4 graded stone aggregate 6mm size blue metal -upto varying thickness 40mm to75mm. All areas to be finished with same level as per Engineer-in-Charge.

Cu m 563 .0126716

400.0 FORMWORK --

401.0 Open timbering over areas including strutting, shoring etc. Complete. (Measurements tobe taken of the face area timbered):For excavation

--

a 0m to 1.5m Sq m 213 .0000258

b 1.5 to 3m Sq m 213 .0000293

c 3m to 4.5m Sq m 213 .0000349

402.0 Providing Centering and shuttering including strutting, propping etc. and removal ofform for Pile Cap & Beam

Sqm 504 .0003598

403.0 Providing Centering and shuttering including strutting, propping etc. and removal ofform all as per norms.

--

-- Form work for Columns --

a Basement to Seventh floor, stair case, parapet wall & drop panel Sq m 2,323 .0039999

b Staircase Head Room Sq m 41 .0000706








total amount

c Parapet column Sq m 66 .0001136

d Drop panel Sq m 472 .0008127

e Staircase landings Sq m 299 .0004647

f Grade slab, Basement to seventh floor Sq m 9,509 .0147792

g Staircase Head Room sqm 34 .0000528

h Staircase sqm 98 .0001512

i Form work for RCC Lift Wall & Locker wall,Retaining wall sqm 1,593 .0022197

j Form work for RCC Lintels sqm 133 .0001678

500.0 REINFORCEMENT STEEL --

501.0 Transportation, straightening, cutting, bending, placing in position at all level, bindingin position of steel reinforcements of TMT steel of grade Fe-500D or 500EQRconfirming to IS:1786 excluding cost of reinforcement steel but including cost ofbinding wire, labour, scaffolding, transportation to & from stores etc complete all as perspecifications,Drawings and as directed by Engineer.Note: Reinforcement steel shall besupplied by BHEL at free of cost

MT 710.77 .029589

600.0 BRICKWORK - Brickwork grade crushed stone sand can be used. Cement is in thescope of contractor.

--








total amount

601.0 FLY ASH BRICKWORK - Providing and laying Fly ash bricks with First quality stockFly Ash bricks of designation 75 in cement mortar 1:6 (1 cement : 6 sand) insuperstructure at all heights (200 mm thickness). The rate to be quoted will include costof scaffolding, racking the joints to make key for plastering, instantaneous curing for aperiod of not less than 7 days and the rate to include all tools and plants, materials allrequired for first quality work etc. complete.

--

a upto v level Cum 580 .0120044

b above v level Cum 159 .0034111

602.0 AUTOCLAVED AERATED CONCRETE BLOCKS - Providing and laying autoclavedaerated cement blocks masonry with 100 mm thick AAC blocks in super structureabove plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 sand ). Therate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every thirdcourse of masonry work

--

a From stilt floor till fifth floor Cum 6 .0001533

b in sixth and seventh floor Cum 2 .0000541

700.0 STRUCTURAL STEEL - Supply of structural steel is in the scope of contractor. --

701.0 Providing Fabricating and erecting structural steel member using MS channel, boxsections Angle materials of Tata make or equivalent as shown in the drawing includingpainting with one coat of primer and two coats of epoxy paint of approved colours etc.,complete, the item will be paid for the quantity erected and no wastages etc., will beaccounted. In stringers, treads, landings etc. of stair cases, including use of chequeredplate wherever required, all complete.The shop drawing of fabrication should beprepared by the fabricator/contractor and approved by the engineer-in-charge beforestarting the work

KG 42,033 .0101788








total amount

702.0 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied asper manufacturers specifications including appropriate priming coat, preparation ofsurface, etc. complete.-On steel work. Supply of paint is in the scope of contractor.

Sqm 293 .0002886

703.0 SS RAILING - Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainless steeldash fasteners , stainless steel bolts etc., of required size, on the top of the floor or theside of waist slab with suitable arrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be considered excludingfixing accessories such as nuts, bolts, fasteners etc.,

KG 442 .0007685

704.0 M.S. tube - Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works, including applyingpriming coat of approved steel primer.

KG 2,442 .0008269

705.0 MS GRILL - Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approvedsteel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc

Kg 4,080 .0015714

706.0 MS GATE - Providing and fixing MS Gate of size shown in the relevant drawing of1.5m height. The Gate will be fixed to the adjoining RCC Pillar with necessary standardhold fast made up of flats and bent to shape and the bottom of Gate will be 75mmabove the floor level. The rate to include hinges, tower bolt, welding, design shown etcand all the above mentioned and also cost of one coat of primer all leads and lifts etccomplete as directed by Engineer at site.

Kg 1,120 .0002786

707.0 Supplying and fixing of heavy duty manhole cover of size 560mmdia Nos 34 .0007372

709.0 Supplying and fixing 4inch dia PVC vent pipe of 2.0 M long with cowl No 27 .0000549

710.0 Supplying and fixing of C.I manhole cover of size-560mm dia Nos 6 .0001301








total amount

711.0 Supplying and fixing CI rungs Nos 126 .0001243

712.0 CORNER GUARDS - Providing and fixing column corner guards made from rubber toprotect the edges of column in parking area. The product should be durable and inconformity with industry standards.Size 100x100mm-8mm thk, 800mm long

Nos 200 .0003636

800.0 FLOORINGNote : All flooring materials size, colour and shade are approved by Architects beforeprocurement in site.Crushed stone suitable for flooring can be used with due approval of project manager.Supply of cement is in the scope of contractor.

--

801.0 GRANOLITHIC FLOORING - 52 mm thick cement concrete flooring with concretehardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cementhardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mmnominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement oras per manufacturers specifications. This includes cost of cement slurry, but excludingthe cost of nosing of steps etc. Complete.

--

a In Basement Floor & Stilt floor Sqm 1,796 .0038261

802.0 Providing and laying Anti-skid vitrified floor tiles in different sizes (Minimumthickness of tile 10mm) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar1:4 (1 cement : 4 sand), including grouting the joints with white cement and matchingpigments etc., complete.- For Toilet areas Note: Supply and lay one coat of First qualityPOP layer over plastic sheet. for protecting the tiles from scratches and oil stains etccomplete as directed. And same removing before handing over the work.

Sq m 273 .0014595








total amount

803.0 Providing and laying glazed vitrified wall tiles in different sizes (Minimum thickness oftile 10mm) with water absorption less than 0.08% and conforming to IS : 15622, ofapproved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 sand), including grouting the joints with white cement and matchingpigments etc., complete.- For Toilet areas

Sq m 277 .0014809

804.0 MARBLE CLADDINGProviding and fixing 18mm thick Italian Marble stone slab wallcladding fixed to the elevation. The fixing shall be done with necessary clamps/ mortor.The rate to include the cost of materials all, leads, lifts, wastage, tools and plants,curing, transport, Taxes, necessary bull nosing, grooves etc complete as directed by theEngineer-in-charge.In 7th Floor Toilet wall cladding

Sq m 42 .0010275








total amount

805.0 LAMINATED WOODEN FLOORING - Providing and fixing of 10mm thick(Armstrong Ambiance- or equivalent) Laminated wooden flooring, with surface finishof Embossed in Register for EIR and Hand sculpted for HS, classification of use 32/23with asurface abrasion resistance of class AC4 (average 4550 cycles), impact resistanceof 9N ,resistance to cigarette burn with a rating of 4(EN 438-2:05), swelling after 24 hrsin water of 8.22%, Modulus of rupture of 53.3 Newton/mm2, Internal bond 1.78newton/mm2, surface soundness 2.0 newton/mm2(EN 13329:2000) with a 0.2 mmthick wear layer on top of a High Density Fiber-substrate core (density ~ 948.3Kgs/M3) of plank size 1214 mm X 141.5 mm having locking arrangement (lockstrength > 670 lbs/ft) with an underlayment made of natural colour foam , withaccessories like End profile, Transition profile etc. complete. It is important to ensurethe sub floor on which the laminate is being laid is smooth, flat & hard & free frommoisture, grease, etc. In case of uneven sub floor the same should be leveled by selfleveling compound. The moisture level present in the subfloor should be less than 8%before installation of the floor.The laminate shall have Armalock locking system. It isrecommended to use a water barrier of minimum of 250 microns and 2mm polyethylenefoam under the planks. The installation shall be undertaken as per the manufacturersinstallation instructions. The work should be carried out as per patterns / design all asshown in the relevant drawings. The rate to include the cost of all leads, lifts, wastages,tools and plants, design pattern etc complete as directed by the Architects.

Sq m 298 .001677








total amount

806.0 PREMIUM LAMINATED WOODEN- FLOORING-Providing and fixing of 10mmthick (Armstrong Ethos- or equivalent) Laminated wooden flooring, with surface finishof Embossed in Register for EIR and Hand sculpted for HS, classification of use 32/23with asurface abrasion resistance of class AC4 (average 4550 cycles), impact resistanceof 9N ,resistance to cigarette burn with a rating of 4(EN 438-2:05), swelling after 24 hrsin water of 8.22%, Modulus of rupture of 53.3 Newton/mm2, Internal bond 1.78newton/mm2, surface soundness 2.0 newton/mm2(EN 13329:2000) with a 0.2 mmthick wear layer on top of a High Density Fiber-substrate core (density ~ 948.3Kgs/M3) of plank size 1214 mm X 141.5 mm having locking arrangement (lockstrength > 670 lbs/ft) with an underlayment made of natural colour foam , withaccessories like End profile, Transition profile etc. complete. It is important to ensurethe sub floor on which the laminate is being laid is smooth, flat & hard & free frommoisture, grease, etc. In case of uneven sub floor the same should be leveled by selfleveling compound. The moisture level present in the subfloor should be less than 8%before installation of the floor.The laminate shall have Armalock locking system. It isrecommended to use a water barrier of minimum of 250 microns and 2mm polyethylenefoam under the planks. The installation shall be undertaken as per the manufacturersinstallation instructions. The work should be carried out as per patterns / design all asshown in the relevant drawings. The rate to include the cost of all leads, lifts, wastages,tools and plants, design pattern etc complete as directed by the Architects

Sq m 107 .0007824

807.0 SHAHBAD FLOORING - Prepare the surface and provide Shahbad stone flooring ofapproved colour and shade in cement mortar 1 : 3 , including pointing the joints withwhite cement, with all lead, lifts etc., in all floors. The sample tiles has to be approvedby the Architect for make and shade. The rate to include the cost of all leads, lifts,wastages, tools and plants, curing, transport,etc complete as directed by the Architects.

Sq m 857 .0037528








total amount

808.0 ENGINEERED WOOD FLOORING - Providing and fixing of 10.5mm thick(Armstrong Bruce or equivalent) Laminated wooden flooring, with surface finish ofEmbossed in Register for EIR and Hand sculpted for HS, classification of use 32/23with asurface abrasion resistance of class AC4 (average 4550 cycles), impact resistanceof 9N ,resistance to cigarette burn with a rating of 4(EN 438-2:05), swelling after 24 hrsin water of 8.22%, Modulus of rupture of 53.3 Newton/mm2, Internal bond 1.78newton/mm2, surface soundness 2.0 newton/mm2(EN 13329:2000) with a 0.2 mmthick wear layer on top of a High Density Fiber-substrate core (density ~ 948.3Kgs/M3) of plank size 1214 mm X 141.5 mm having locking arrangement (lockstrength > 670 lbs/ft) with an underlayment made of natural colour foam , withaccessories like End profile, Transition profile etc. complete.

Sq m 85 .001259

809.0 POLISHED GRANITE FLOORING- Providing and laying polished granite slab of20mm thickness of cement mortar 1:4 using one part of cement and four parts of sand,joints are mitrated, the quality of stoned should be approved by the engineer in chargeof the work. The rate to include the cost of all leads, lifts, wastages, tools and plants,curing, transport, taxes necessary bull nosing, 3M anti-skid tape for steps, grooves etccomplete as directed by the engineer-in-charge

Sq m 801 .0090465

810.0 ARTIFICIAL MARBLE - Marble work gang saw cut (polished and machine cut) ofthickness 18mm for wall lining (veneer work), backing filled with a grout of average12mm thick in cement mortar 1:3 (1 cement : 3 sand), including pointing with whitecement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment tomatch the marble shde (to be secured to the backing by means of cramps, which shallbe paid for seperately). Rate includes cost designs/ patterns in flooring using differenycolours and size.

Sqm 320 .00552








total amount

811.0 GRANITE FLOORING Providing and laying flamed finish Granite stone flooring inrequired design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed withcement slurry and pointing with white cement slurry admixed with pigment of matchingshade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-ChargeFlamed finish granite stone slab Jet Black, CherryRed, EliteBrown, Cat Eye or equivalent.

Sq m 398 .0042766

812.0 GRANITE COUNTER TOP - Providing and fixing 18 mm thick gang saw cut, mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size, approved shade,colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 sand),joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels

Sq m 64 .0007333

813.0 CARPET TILE FLOORING 500mm X 500mm - Supply and installation of modularcarpet tiles with 3 layer glas bac, tufted textures/loop pile pile which should be 100 %solution dyed. The carpet tile must have been tested for commercial heavy dutyapplication and should be anti static. The carpet tile must have hardback performancebacking system and all performance characteristics must be backed by 15 yearscomposite warranty.(make: Interface fit series or equivalent)

Sq m 659 .0027359

814.0 PREMIUM CARPET FLOORING 500mm X 500mm - Supply and installation ofmodular carpet tiles with 3 layer glas bac, tufted textures/loop pile pile which should be100 % solution dyed. The carpet tile must have been tested for commercial heavy dutyapplication and should be anti static. The carpet tile must have hardback performancebacking system and all performance characteristics must be backed by 15 yearscomposite warranty.( make: Interface Stitchup series or equivalent)

Sq m 110 .0007173








total amount

815.0 VITRIFIED TILE FLOORING - Providing and laying Vitrified tiles in different sizes(Minimum thickness of tile 10mm), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser ofsteps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 sand), includinggrouting the joint with white cement & matching pigments etc. Complete.-

Sq m 2,349 .0125584

900.0 PLASTERING - Supply of cement is in the scope of contractor.Crushed stone sand of plastering grade can be used confirming to INDIANSPECIFICATION IS:2116 with due approval of project manager.

--

901.0 CEILING --

-- Plastering the sides and soffits of slabs and beams with cement mortar 1:4, 12mm thickusing fine sand including providing patch plaster etc. The rate to include apart fromabove the cost of all scaffolding, curing. Wetting the walls before proceeding with theplastering etc. complete.

--

b In stilt floor Sq m 35 .0000259

c In AHU rooms, Electrical rooms in all floors Sq m 278 .0002059

902.0 INTERNAL PLASTERING --

-- Prepare surface and plaster the inner surfaces of wall, RCC surfaces contiguous tomasonry with cement mortar 1:4, 12mm thick , including patch plaster etc. The rate toinclude apart from the above the cost of scaffolding, curing, tools and plants etc.complete.

--

a In basement floor to seventh floor Sq m 8,779 .0065029

903.0 EXTERNAL PLASTERING --








total amount

-- Prepare surface and plaster the external surfaces of wall, RCC surfaces contiguous tomasonry with cement mortar 1:4, 20mm thick, including patch plaster etc. The rate toinclude apart from the above the cost of scaffolding, curing, too

--

a Up to 10M Sq m 846 .0008849

b from 10.00m to 13.00m Sq m 268 .0003204

c from 13.00m to 16.00m Sq m 268 .0003605

d From 16.00m to 19.00m Sq m 268 .0004006

e from 19.00m to 22.00 m Sq m 348 .0005722

f from 22.00m to 25.00 m Sq m 199 .000357

904.0 Prepare surface and plaster the internal and external surfaces of walls, R.C.C surfacescontiguous to masonry with cement mortar 1 : 4 12mm thick using fine sand, includingpatch plaster etc. The rate to include apart from the above the cost of scaffolding,curing, tools and plants etc. complete in all floors.

Sqm 315 .0002333

905.0 PLASTER TO CONCRETE SURFACES - Plastering with CM 1:4 of 12mm thick onCover slab surfaces including chipping of the surfaces, cleaning of loose grit, dirt, oil,etc. and laying patches of gauge plaster, Rendering the surfaces using fine sand passingthrough 4.75mm and finished smooth etc. including scaffolding, curing includingcleaning of stains on joinery etc complete. at all heights in all floors.

Sqm 183 .0001356








total amount

906.0 WATER PROOF PLASTERING - Providing and laying water proofing over the R.C.Cfloor with Cement Mortar 1:3 of 20mm thick premixed with water proofing chemicalssuch as conbex 100 of FOSROC chemicals cera proof I.W.P. powder / cera proof I.W.Dliquid conforming to I.S 2645 of 1975 and reaffirmed in 1992 the chemical mixedintegrally with cement in dry form before being mixed with water and the modifiedmortar is applied on the slab prepared already including roughening of slab to receivethe polymer integral modified cement mortar Care to be taken to tap on the mortarsurface to avoid air pockets in the mortar and to ensure no cavities in the mortar Testingagainst water leakage will be carried out by the contractor as per the standardprocedures spelt out in the relevant codes all as per specification and includingnecessary scaffolding and as directed by the Engineer-in-charge.

Sqm 815 .0021487

907.0 Providing and laying Smooth finishing of the exposed surface of R.C.C. work with 6mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Sq m 39 .0000236

1000.0

WATER PROOFING - Supply of cement is in the scope of contractor. Crushed stonesand suitable for the work can be used with due approval of project manager.

--

1001.0

WATER PROOF SUNKEN AREAS --

-- Providing and laying water proofing treatment in sunken portion of Wcs bathroom etc.,by applying cement slurry mixed with water proofing cement compound consisting ofapplying a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofingcement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cementcompound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followedwith water curing for 48 hours. The rate includes preparation of surface, treatment andsealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Sq m 294 .0003228








total amount

1002.0

WATER PROOFING ROOFS, TERRACES - Providing and laying integral cementbased water proofing treatment including preparation of surface as required fortreatment of roofs,balconies, terraces etc consisting of following operations: a)Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with waterproofing compound conforming to IS. 2645 and approved by Engineer-in-charge overthe RCC slab including adjoining walls upto 300 mm height including cleaning thesurface before treatment. b) Laying brick bats with mortar using broken bricks/brickbats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 sand)admixed with water proofing compound conforming to IS : 2645 and approved byEngineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5sand ) admixed with water proofing compound conforming to IS : 2645 and approvedby Engineer-in-charge to required slope and treating similarly the adjoining walls upto300 mm height including rounding of junctions of walls and slabs c) After two days ofproper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cementadmixed jointless cement mortar of mix 1:4 (1 cement :4 sand) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer-in-chargeincluding laying glass fibre cloth of approved quality in top layer of plaster and finallyfinishing the surface with trowel with neat cement slurry and making pattern of300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded withwater for a minimum period of two weeks for curing and for final test. All aboveoperations to be done in order and as directed and specified by the Engineer-in-Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Sq m 903 .0034385








total amount

1003.0

WATER PROOFING OVER BASEMENT RAFT SLAB - Providing and layingintegral cement based treatment for water proofing on horizontal surface at all depthbelow ground level for under ground structures as directed by Engineer-in-Charge andconsisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 sand) mixed with water proofingcompound conforming to IS:2645 in the recommended proportion over the levelingcourse (leveling course to be paid separately). Joints sealed and grouted with cementslurry mixed with water proofing compound.ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stoneaggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughlyembedded in the 2nd Layer (using rough kota stone)

Sq m 1,105 .0041382

1004.0

WATER PROOFING OVER BASEMENT RETAINING WALL - Providing andlaying integral cement based treatment for water proofing on the vertical surface byfixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with waterproofing compound conforming to IS:2645 in recommended proportions with a gap of20 mm (minimum) between stone slabs and the receiving surfaces and filling the gapswith neat cement slurry mixed with water proofing compound and finishing the exteriorof stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cementpunning mixed with water proofing compound in recommended proportion complete atall levels and as directed by Engineer-in-charge :(using rough kota stone)

Sq m 788 .0036348

1005.0

ROOF TILES - Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initialemittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thickcement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints withmix of white cement & marble powder in ratio of 1:1, including rubbing and polishingof the surface upto 3 cuts complete, including providing skirting upto 150 mm heightalong the parapet walls in the same manner.

Sq m 760 .0032167








total amount

1006.0

LIGHT WEIGHT CONCRETE - Providing and laying Hemalite concrete 1:3 (1 part ofcement & 3 part of Hemalite aggregate) having higher compressive strength and highestfire resistance with thermal / acoustic insulation properties, anticorrosion, anti-condensation, etc of required proportion to get the desired density, mixing,transportation, placing,compacting and finishing to the required level with necessaryside supports, equipments, etc complete for infill wherever required including layinglayers as directed including form work wherever necessary and well compacted etc. allcomplete, as directed.

Cum 248 .0061001

1100.0

FINISHES: --

1101.0

Preparing the surface and applying POP Punning for Wall painting with acrylicemulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour Two coats including primer 1 coat

-- 158 .0001136

a For ceiling of Basement & stilt Sq m 60 .0000431

b In AHU rooms, Electrical rooms in all floors Sq m 278 .0001998

1102.0

ACRYLIC EMULSION PAINT - Preparing the surface and applying POP Punningapproved by Architect Wall painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, to achieve evenshade and colour Two coats including primer 1 coat

--

a In Basement Floor and Stilt floor walls Sq m 1,009 .0007252

1103.0

Preparing the surface and applying 2 coats of Synthetic Enamel paint of approvedcolour and shade for all doors, windows and ventilators and including grills & handrailsover one coat of wood primer including cost of materials, Labour etc. complete asdirected by the Architects.

Sq m 15 .0000062








total amount

1104.0

Preparing the surface and applying 2 coats of Epoxy paint of approved colour and shadefor all steel including grills & handrails over one coat of steel primer including cost ofmaterials, Labour etc. complete as directed by the Architects.

Sq m 293 .0002886

1105.0

TEXTURED EXTERIOR PAINT - Finishing walls with textured exterior paint ofrequired shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over andincluding priming coat of exterior primer applied @ 2.20kg/10 sqm

Sq m 801 .0004441

1106.0

CEMENT PAINTING - Finishing walls with water proofing cement paint of requiredshade - New work (Two or more coats applied @ 3.84 kg/10 sqm). Supply of cement isin the scope of contractor.

Sqm 252 .000045

1107.0

Prepare surface free from dirt / grease and apply three or more coats of well slackedwhite wash to ceiling of cover slab and internal walls etc complete as directed.

Sqm 535 .000034

1108.0

White wash to ceiling and internal & outer walls - Prepare surface free from dirt /grease and apply three or more coats of well slacked white wash to ceiling of cover slaband internal walls etc complete as directed.

Sq m 322 .0000204

1110.0

ROAD PAINTING - Painting road marking with adequate nos of coats to give uniformfinish with road marking paint of superior make as approved by the Engineer-in-charge,i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. andlining out complete.New work (Two or more coats)

Sq m 100 .0000386

1111.0

Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade :Two or more coats on new work

--

1112.0

Providing and applying plaster of paris putty of 2 mm thickness over plastered surfaceto prepare the surface even and smooth complete

Sq m 655 .0004615

1200.0

SANITARY FIXTURES --








total amount

1201.0

HPL TOILET PARTITION - Supply & Fixing Merino HPL SERIES restroom cubicsystem or equivalent in other approved make, of size 1615mm X 2100mm, includingHPL door of size 750mm X 2100mm or any other suitable size as per manufacturersspecifications. The cost shall include door and other standard accessories like Thumbturn, door knob with occupancy indicator, coat hook, gravity hinges, etc., all completesuitable for glass series as per manufacturers specifications. The contractor will checkthe exact site dimensions before lacing the order.

No 47 .0093962

1202.0

URINAL DIVIDER - Providing and fixing urinal divider of size 900 X 450, 12mmthick fully frosted toughened glass machine and edge polished of approvedshape,size,shade as shown in the drawing. .Fixing the urinal divider in the wall as perdrawing,with D bracket and necessary fitting as approved shape and make (SaintGobin) as directed by the Engineer-in-charge.

Nos 24 .0004836

1203.0

MIRROR - Supplying and fixing approved make 6mm thick mirror made out of floatglass, with beveled edges, making 4/ 6 Nos holes, fixing the mirror over the dado / wallsurface using Stainless Steel Stud of 20mm dia with detachable screw head keeping agap of 25mm between glass and the dado wall etc., complete Rectangular shape1500mm x 450mm

each 33 .0001607

1204.0

Supplying, Fixing and commissioning of White colour, make and model glazed vitreousChina Wall mounted Water Closet constallation with concealed P trap with bronzescrews Consealed flush tank with CP flanges, solid plastic seat and lid with heavy dutyCP hinges and rubber buffers and flap etc. The work shall include cutting making ofwalls and floors etc including necessary consumables like brass screws, CP extensionnipple of approved make, dia and length, wooden plugs, white cement, sealantsetc.Only drilling machines shall be used for making the holes in the walls for fixing, nowall jumper and hammer will be allowed.

Nos. 48 .0022965

1205.0

Supplying fittings/fixtures and fixing of CP health faucet consisting of: a)CP angle stopcock with wall flange.b)PVC flexible tube of 1.0m length.c)Hand operated spray unit(instant type)d)CP Crutch. Notes: Conditions mentioned in above item shall beapplicable.

Nos. 48 .0005016








total amount

1206.0

Supplying, fixing and commissioning of glazed White colour vitreous china OvelCounter bottom wash basin installed below granite/ marble with CI / MS brackets,15mm dia CP SENSOR battery operated pillar tap fitting, 32mm dia CP waste couplingwith plug and chain,32mm dia CP brass bottle trap, PVC / CP watersupply connectingpipe, one no of 15mm dia CP angle stop cock for cold watersupply liness with wallflange etc., The works shall include cutting in walls and making good the walls andfloors. Size of wash basin 55 x 40cm.(Granite / Marble counter will be installed byother agency)

Nos. 45 .0012991

1207.0

Supplying, Fixing and commissioning of White colour, make and model vitreous chinaRectangular wash basin with semi pedastal GI rag bilts, 15 mm dia CP SENSORbattery operated pillar tap fitting,32mm dia CP waste coupling with plug and chain andincluding PVC connecting pipe, 32mm dia CP brass bottle trap, one no of 15mm dia CPangle stop cock with wall flange. The works shall include cutting in wall and makinggood the walls and floors. Notes: Conditions mentioned in above item shall beapplicable.

Nos. 10 .0002241

1208.0

Supplying and fixing of 15mm dia CP SENSOR tap with CP wall flange. Notes:Conditions mentioned in above item shall be applicable

Nos. 12 .0000991

1209.0

Supplying and fixing of best quality and approved make stainless steel kitchen sinkwith single bowl and single drain board made of 18 gauge sheet 40mm dia CP wastecoupling, 40mm PVC waste pipe etc, complete. Notes: Conditions mentioned in aboveitem shall be applicable.Kitchen Sink with single bowl Only, Make: Franke orequivalent

Nos. 7 .0001096

1210.0

Supplying and fixing of 15mm dia J type CP sink cock with swinging spout (wallmounted model) for kitchen sink with CP wall flange etc. Notes: Conditions mentionedin above item shall be applicable - CP Sink Cock:

Nos. 7 .0000514

1211.0

Supplying and fixing of 15mm dia CP angle stop cock with wall flange etc.(for aquaguard point in Kitchen)- Angle Stop Cock

Nos. 7 .0000206








total amount

1212.0

Supplying ,fixing of White colour, make and model and size viterous china concealedsoap dish including cutting and setting in walls with white cement joints making goodof walls. Notes: Conditions mentioned in item no. shall be applicable.

Nos. 55 .0001418

1213.0

Supplying & Fixing of glazed white colour vitreous china large flat back lipped urinalswith built in automatic sensor urinal flushing system, (with 220v power / batteryoperated) including electric control system and motorised valve, CP flush pipe with CPspreaders, 32mm dia CP brass bottle trap, etc., complete including cutting & makinggood the walls & floors. (Gents toilet only)

Nos. 25 .0012153

1214.0

Supplying and Fixing ABS Body Liquid Soap Dispenser with push button operationand liquid soap pouch placed inside including fixing with C P Screws etc. complete

Nos. 32 .0001515

1215.0

Supplying and Fixing ABS Body Tissue paper dispenser with foldable tissue paperplaced inside including fixing with C P Screws etc complete

Nos. 22 .0001833

1216.0

Supplying and Fixing C P Toilet paper holder including fixing with C P Screws etccomplete

Nos. 48 .0002273

1217.0

Supplying and Fixing ABS Body hand drier of AC operated on 230 volts with auto onand off operation including fixing with C P Screws etc. complete

Nos. 20 .0006061

1218.0

Supplying and Fixing 20mm thick polished granite Urinal position with edges polishedand front corners curved and fixed with C P Bolt and nut 2 Nos complete Size 600 x450 mm

Nos. 20 .0001477








total amount

1219.0

Providing, fixing, testing and commissioning of PVC soil, waste and vent pipeconfirming to IS 13592 of SWR quality( Type - B ) or 6 kg / sq.cm pressure ratedincluding all fittings, like Bends, Tees, Elbows, Collars, junction, offsets, access pipes,jointing with solvent cement followed by application of leak proof adhesive like FRPpaste & laid as ceiling hung system of inside the toilets, kitchen and utility to therequired slope including necessary Clamp support & making necessary bores in wallsas applicable, making good the bores with CM 1:3 or cement concrete as applicable,curing etc., complete.Notes:Wall chasing shall be done with chasing machine torequired lines and levels.

--

-- INTERNAL (TOILET & KITCHEN): --

a 75mm dia ( 6kg/sq.cm ) Mtr. 175 .0002532

b 110mm dia ( 6kg/sq.cm ) Mtr. 130 .0003145

1220.0

Providing, fixing, testing and commissioning of PVC soil, waste and vent pipeconfirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including allfittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets,access pipes, jointing with rubber ring / solvent cement followed by application of leakproof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket ofsuitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and wastepipe lines laid in vertical shafts.

--

-- EXTERNAL (IN SHAFTS): --

a 63mm dia - ( 6kg/sq.cm ) (Antisyphonage pipe) Mtr. 85 .0001017

b 110mm dia - ( 6kg/sq.cm ) (Waste pipe) Mtr. 125 .0003024

c 160mm dia - ( 6kg/sq.cm ) ( Soil pipe) Mtr. 110 .0004975








total amount

1221.0

Providing, fixing, testing and commissioning of PVC Trap of self cleansing designmoulded or fabricated, if not available in size mentioned below, with or without ventarm jointing with rubber ring / solvent cement followed by application of leak proofadhesive like FRP paste including PVC extension pipe for PVC / floor trap for withsurface preparation with finishing etc., complete size: 100 mm dia x 400 mm length.Making good the floors. Note: Rate is inclusive of bore hole packing and necessarysupport for the floor trap.

--

a 110mm dia x 75mm dia Nos. 15 .0000341

b 110mm dia x 75mm dia x75 mm dia Nos. 40 .0000774

c 110mm dia x 75mm dia x50 mm dia / 40 mm Nos. 25 .0000484

1222.0

Providing, fixing, testing and commissioning of CP grating with rim including settingin floor with white cement mortar and making good the floor (Chilli Make).

--

a 125 mm dia Nos. 80 .0000669

1223.0

Providing, fixing, testing and commissioning of PVC waste pipe of agricultural sereisconforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling,etc jointing with solvent cement followed by application of leak proof adhesive likeFRP paste laid on floors inside the toilets to the required slope including makingnecessary bores in walls / foundations / concrete slab as applicable, making good thebores with CM 1:3 or cement concrete as applicable, curing etc., complete.Note : Wallchasing shall be done with chasing machine to required lines and levels.

--

a 40 mm dia (15kg / sq.cm) Mtr 90 .0001242

b 50 mm dia (15kg / sq.cm) Mtr 20 .0000276








total amount

1224.0

Providing, fixing, testing and commissioning of ready made PVC gully trap (ISI brandonly) of 100 x 100 mm size with 100 mm dia outlet. and also providing suitable size ofcast iron grating, including 40 mm thick precast ready made light duty RCC cover slab,clearing the surplus material, earth etc. complete.

--

a 100mm x 100mm size `P/S' trap Nos. 4 .0000231

1225.0

Providing, fixing, testing and commissioning of PVC sewer line of prince / suprememake confirming to IS 4985 of Agricultural series - 6 kgs / sq.cm pressure rated, forunderground drainage laid under the soil from Gully trap to inspection chamber outsidethe building, to the required slopes, jointing with solvent cement followed byapplication leak proof adhesivesof FRP paste, including haunching / covering only thejoints with cement concrete 1:3:6 at all the joints with and testing of joints with watercolumn etc. complete.

--

a 160 mm dia Mtr 100 .0003603

1226.0

Construction of brick masonry inspection chambers of internal clear dimension asmentioned below by using first class table moulded modular bricks 230 mm thick wallin cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including providingprecast ready made medium duty RCC top slab in 1:2:4 Mix (1 cement: 2 sand: 8graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement &making benching and channelling in cement concrete 1:2:4 (1 cement: 2 sand: 4gradedstone aggregate) neatly finished complete as per standard design and as perdrawing and specifications. (The rate shall include necessary earth work excavation inall types of soil excluding soft and hard rock, back filling with available excavatedsand: 8 graded stone aggregate)

--

a Inside size of 600 x 600mm & depth not exceeding 600mm including providing 600 x600mm RCC cover with MS l angle frame of size 50 x 50 x 6 mm thick.

Nos. 6 .0001513








total amount

b Inside size of 900 x 900mm & depth not exceeding 900mm including providing 900 x900mm RCC cover with MS l angle frame of size 50 x 50 x 6mm thick.

Nos. 1 .0000436

1300.0

FACADE --

1301.0

ALUMINIUM COMPOSITE PANELDesigning, fabricating, testing, installing andfixing in position Curtain Wall with Aluminium Composite Panel Cladding, with opengrooves for linear as well as curvilinear portions of the building, for all heights and alllevels etc. a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to make itwatertight including checking of all the structural and functional design. b) Providing,fabricating and supplying and fixing panels of aluminium composite panel cladding inpan shape in metalic colour of approved shades made out of 4mm thick aluminiumcomposite panel material consisting of 3mm thick FR grade mineral core sandwichedbetween two Aluminium sheets (each 0.5mm thick). The aluminium composite panelcladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon basedluoropolymer resin coating of approved colour and shade on face - 1 and polymer(Service) coating on face - 2 as specified using stainless steel screws, nuts, bolts,washers, cleats, weather silicone sealant, backer rodsc) The fastening brackets ofAluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serratedwashers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts ofapproved make in SS 316, Nylon separators to prevent bi-metallic contacts all completeRequired to perform as per specification and drawing

--

a Brushed Aluminium Finish ACP- Make (Alucobond or equivalent) Sq m 2,215 .0277651

b Wood Finish ACP- Make (Alucobond or equivalent) Sq m 2,585 .0443374








total amount

1302.0

STRUCTURAL GLAZING (Double glazing)Designing, fabricating, testing, protection,installing and fixing in position semi (grid) unitized system of structural glazing (withopen joints) for linear as well as curvilinear portions of the building for all heights andall levels, includinga) Structural analysis & design and preparation of shop drawings forthe specified design loads conforming to IS 875 part III (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functionaldesign of the aluminum sections for fixing glazing panels of various thicknesses,aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts,clamps etc.,structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation& drainage and protection against fire hazard including:b) Fabricating and supplyingserrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of requiredsizes, sections and profiles etc. to accommodate 3 Dimentional movement for achievingperfect verticality and fixing structural glazing system rigidly to the RCC/masonry/structural steel framework of building structure using stainless steel anchorfasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washersetc. of stainless steel grade 316, of the required capacity and in required numbers.c)Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory /work shop environment , including double sidedspacer tape, setting blocks and backer rod, all of approved grade, brand andmanufacture, as per the approved sealant design, within and all around the perimeter forholding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1mm thick and of sizes, shapes and profiles, as required as per the site conditions, to sealthe gap between the building structure and all its interfaces with curtain glazing to makeit watertight.e) Making provision for drainage of moisture/ water that enters the curtainglazing system to make it watertight, by incorporating principles of pressureequalization, providing suitable gutter profiles at bottom (if required), makingnecessary holes of required sizes and of required numbers etc. complete. This itemincludes cost of all inputs of designing, labour for fabricating and installation of

--








total amountaluminium grid,installation of glazed units, T&P, scaffolding and other incidentalcharges including wastages etc., enabling temporary structures and services, cranes orcradles etc. as described above and as specified. The item includes the cost of getting allthe structural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge. The item also includes the cost of allmock ups at site, cost of all samples of the individual components for testing in anapproved laboratory, field tests on the assembled working structural glazing asspecified, cleaning and protection till the handing over of the building for occupation.In the end, the Contractor shall provide a water tight structural glazing having all theperformance characteristics etc. All complete as required, as per the Architecturaldrawings, as per item description, as specified, as per the approved shop drawings andas directed by the Engineer-in-Charge.Note:- 1. The cost of providing extrudedaluminium frames, shadow boxes,








total amount

-- extruded aluminium section capping for fixing in the grooves of the curtainglazing and vermin proof stainless steel wire mesh shall be paid for separately underrelevant items under this subhead. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shall bemeasured in sqm. up to two decimal Places.Note:-2. The following performance test areto be conducted on structural glazing system if area of structural glazing exceeds 2500Sqm from the Certified laboratories accreditated by NABL(National AccreditationBoard for Testing and Calibration Laboratories), Department of Science &Technologies, India. Cost of testing is payable separately. The NIT approving authoritywill decide the necessity of testing on the basis of cost of the work, cost of the test andimportance of the work. Performance Testing of Structural glazing system Tests to beconducted in the NBL CertifiedLaboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to-300pa)&(+50pa to +300pa) as per ASTM E-283-04 testing method for a rangeof testing limit 1to 200 mVhr2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09testing method for a range up to 2000 ml.3. Dynamic Water Penetration (50pa to1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4. StructuralPerformance Deflection and deformation by static air pressure test (1.5 times designwind pressure without any failure) as per ASTME- 330-10 testing method for a rangeupto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testingmethod for Qualitative test Tests to be conducted on site 6. Onsite Test for WaterLeakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml Note:-Glass willbe provided SHGC to be with in 0.27 and VLT of at least 30%

Sq m 1,340 .011885








total amount

1303.0

Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units ofsize and shape as required and specified, comprising of an outer heat strengthened floatglass 6mm thick, of approved colour and shade with reflective soft coating on surface #2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick,spacer tube12mm wide, dessicants, including primary seal and secondary seal(structural silicone sealant) etc. all complete for the required performances, as per theArchitectural drawings, as per the approved shop drawings, as specified and as directedby the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop ofthe glass processor. (Payment for fixing of IGU Panels in the curtain glazing is includedin cost of item No.26.2) For payment, only the actual area of glass on face # 1 of theglass panels (excluding the areas of the grooves and weather silicone sealant) providedand fixed in position, shall be measured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face #2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make havingproperties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and Uvalue of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall bedecided by technical sanctioning authority as per the site requirement. Note:-Glass willbe provided SHGC to be with in 0.27 and VLT of at least 30%

Sq m 1,206 .0165589

1304.0

EXTRA FOR OPENABLE --

-- Extra for openable side / top hung vision glass panels (IGUs) including providing andsupplying at site all accessories and hardwares for the openable panels as specified andof the approved make such as heavy duty stainless steel friction hinges, min 4 -pointcremone locking sets with stainless steel plates, handles, buffers etc. includingnecessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as perthe Architectural drawings, as per the approved shop drawings, as specified and asdirected by the Engineer-in- Charge.

Sq m 134 .0014507








total amount

1305.0

SPIDER GLAZING SYSTEM --

-- Design supply & installation of suspended Spider Glazing system designed to withstandthe wind pressure as pr IS 875 (Part-III). The Suspended System held with SpiderFittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panelassembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steelbrackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm usingfastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylonbushes and separators to prevent bi-metallic contacts, all complete to perform as perspecification and approved drawings. The complete system to be designed toaccommodate thermal expansion & seismic movements etc. The joints between glasspanels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to befilled with non staining weather sealant, so as to make the entire system fully waterproof & dust proof. The rate shall include all design, Engineering and shop drawingincluding approval from structural designer, labour, T&P, scaffolding, other incidentalcharges including wastage, enabling temporary services all fitting fixers nut bolts,washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment, actual elevation area of Glazing including thickness ofjoints and the portion of Glass panel inside the SS channel shall be measured. Note:-Glass will be provided SHGC to be with in 0.27 VLT of at least 30%

Sq m 120 .00306

1306.0

SHADOW BOX --








total amount

-- Providing, fabricating and supplying shadow box of required size and shape, for fixingin the spandrel portion of the structural glazing, in linear as well as curvilinear portionsof the building by providing semi -rigid, inorganic,non-combustible fibre glass woolinsulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulationlayer shall have facing (factory bonded on surface - 1of the fibre glass insulation layer),of black nonwoven fibre glass tissue of nominal thickness 0.5 mm and nominal massnot less than 60 gm / sqm, made of randomly oriented glass fibres distributed in abinder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheetbacking using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etccomplete.

sq.m 20 .0001135

1307.0

ALUMINIUM FRAMEWORK --

-- Providing and supplying aluminium extruded tubular and other aluminium sections asper the architectural drawings and approved shop drawings,the aluminium quality asper grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved bythe Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves,screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extrashall be paid on this account).

kg 16,061 .0199944

1400.0

JOINERIES - DOOR --

1401.0

Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of engineer-in-charge

Sq m 6 .0000222








total amount

1402.0

Supply and Fixing flush doors (soild core) hardwood frame of size 100mm x 75mmConfirming to relevant IS Standard with flush shutter 32mm thick with internal lippingand manufactured in an approved make and approved by the Architect. The Flush Doorwill be resin bonded and formaldehyde, treated chemically against dampness, termiteand other fungus. The rate to include cost of iron oxidised hinges 3nos 125mm long,Aluminium anodised tower bolt 3nos and 1 no door lock, etc. The internal surfacesshould be painted with synthetic enamel paint of approved shade and other side isfinished with 1mm thick laminate of approved shade and make as directed by theEngineer-in-charge.

sqm 2 .0000552

1403.0

Providing aluminium ventilators including frame with all fitttings Sq m 5 .0000644

1404.0

HIGH LEVEL SOLID PARTITION WITH LAMINATE FINISH - Providing andfixing rigidly in position a partition using 50 x 50mmx1.5mm Aluminium frameworkrunning both horizontally and vertically at not more than 600mm c/c both ways. Theframework alternative vertical member to touch the true ceiling height from the finishedfloor level and fixed rigidly to the ceiling, flooring, walls or partitions. All verticalframework members shall be of a single piece without any joint as directed by theArchitects The framework to be concealed with 12 mm thick MDF board.The MDFboard will be camouflaged with 1.5mm thick laminate of approved colour and makeand shade and make and grooves to be provided as shown in the drawing.The ratequoted to include grouting and fixing and making up the flooring to its originalcondition as well as making provisions for laying conduits, switch boxes and lightfittings etc. Payment will be made from FFL to bottom of false ceiling.

--

a For straight partitions Sq m 937 .0111525

b For curved partitions Sq m 402 .0055704








total amount

1405.0

HIGH LEVEL SOLID PARTITION WITH VENEER FINISH - Providing and fixingrigidly in position a partition using 50 x 50mmx1.5mm Aluminium framework runningboth horizontally and vertically at not more than 600mm c/c both ways. The frameworkalternative vertical member to touch the true ceiling height from the finished floor leveland fixed rigidly to the ceiling, flooring, walls or partitions. All vertical frameworkmembers shall be of a single piece without any joint as directed by the Architects Theframework to be concealed with 12 mm thick MDF board.The MDF board will becamouflaged with 4mm thick veneer of approved shade and make and finished withmelamine spray polish as shown in the drawing.The rate quoted to include grouting andfixing and making up the flooring to its original condition as well as making provisionsfor laying conduits, switch boxes and light fittings etc. Payment will be made from FFLto bottom of false ceiling. NOTE: The partition shall have a glass wool soundabsorption glass fibre 50mm thick in between inner and outer plywood for acousticinsulation. The partition includes the magnetic strip, closures and jambs etc. The rateshall include the provision of rock wool and fixing the same.

--

a For straight partitions Sq m 284 .0027699

b For curved partitions Sq m 122 .0014233








total amount

1406.0

SINGLE GLAZED TOUGHENED GLASS PARTITIONS - Supply and Fixing of SlimGlass partition of 10mm Toughened Glass using DORMA Alexa System-45 FramesOR EQUIVALENT to a height of maximum 3m or as per drawing.The Fixed glass tobe fixed using DORMA Alexa BP45 Profiles at Top & Bottom & Alexa SP45 at sides.The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per thearchitect design. DORMA Alexa H Junction profile to be used at all Glass to Glassvertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as perdesign.In case of Glass overall panel Alexa MP45 & BP45 Overpanel Profile to beused.In case of Open glass edges EP45 End Profile to be used.The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profileshall be matt natural anodized, the Profile Manufacturer to supply all the necessaryclips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames: DORMA OR EQUIVALENT , Glass : SaintGiobain/Asahi

Sq m 434 .0103824








total amount

1407.0

HIGH LEVEL PARTLY SOLID& PARTLY GLAZED PARTITION - Providing andfixing rigidly in position partly solid & partly glazed partition with 50 x 50mmx1.5mmaluminium framework on both directions horizontally and vertically at not more than600mm c/c. The framework alternative vertical member of frame work to touch the trueceiling height from the finished floor level and fixed rigidly to the ceiling, flooring,walls or partitions with base cups. Wherever required and to no extra cost to theEmployer and as directed at site. The framework to have 12mm thick MDF fixed oneither side of the framework up to 75mm above false ceiling etc all as per details in thedrawing. No extra rate will be payable from the MDF board above false ceiling. The plywill be camouflaged with 1.5mm thick laminate of approved colour and make andshade and make and grooves to be provided as shown in the drawing.The partition tohave a 8mm thick plain distortion free float glass is fixed to the partition with 12.5 x12.5mmsteem beach wood beading and the partition. Measurement will be taken on thevisible area from flooring to bottom of false ceiling only. No extra rate will be payablefrom the plywood above false ceiling. The rate quoted to include grouting and fixingand making up the flooring to its original condition as well as making provisions forlaying conduits, switch boxes and light fittings etc. Payment will be made from FFL tobottom of false ceiling.

Sq m 50 .0005591

1408.0

FIRE RATED PARTITION FOR SERVER ROOM (2 HOURS) - Providing and fixingglazing in fire resistant door shutters, fixed panels,ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, includingapplying a coat of approved fire resistant primer on G.I. beading etc., complete all asper direction of Engineer-incharge -With clear fire resistant glass panes 6mm thick ofapproved brand, having minimum 120 minutes fire resistance

Sq m 56 .0056471

-- PANELLING WORK --








total amount

1409.0

COLUMN WITH RECTANGULAR PANELLING- Providing and fixing in position ofthe column panelling in a rectangular shape, circumscribing the R.C.C. Column with 50x 50mmX1.5mm aluminium framework as per the pattern shown in the drawing andembedded in the RCC Column. The framework is concealed with 12mm thick MDFboard and camouflaged with 1.5mm thick laminate of approved shade and brand andgrooves. The size and shape of the panelling as per the drawing given.The top andbottom portion of the column panelling abutting the false ceiling and flooring. Theconcealed faces of the MDF board is to be treated against borer / termite / deteriorationand painted with one coat of primer and two coats of paint. The work is to be carriedout in a first class workmanship manner all as per details shown in the drawing and asdirected at site etc., complete. The rate quoted to include all the above apart from allleads lifts, transport and scaffolding etc. complete and as directed by the Engineer atsite. The work is to be carried out in a first class workmanship manner all as per detailsshown in the drawing and as directed at site etc., complete.

Sq m 1,091 .0107329

1410.0

WALL PANELLING Providing and fixing of laminate panelling in walls as per thefollowing:The Aluminium frame work comprising 50x25x1.5mm frame work at600mm c/c in both ways on the wall(after drilling with pneumatic driller)at requiredlocations.12mm thick MDF board is fixed to the framework as specified above and theplywood is camouflaged with 1.0 mm thick laminate of approved shade and all as perthe drawing.The rate quoted to include all the above apart from all leads lifts,transportand scaffolding etc.,completed and as per directed by the Engineer at site. The work isto be carried out in a first class workman ship manner all as per details shown in thedrawing and as directed at site etc.,

Sq m 25 .0002319

1411.0

GRANITE WALL CLADDING- Providing and fixing 19mm thick Granite slab wallcladding fixed to the elevation. The granite slab to be fixed with necessary clamps/mortor. The rate to include the cost of all leads, lifts, wastage, tools and plants, curing,transport, Taxes, necessary bull nosing, grooves etc complete as directed by theArchitects.

Sq m 25 .0002847








total amount

1412.0

ARTIFICIAL MARBLE WALL CLADDING- Providing and fixing 19mm thick ItalianMarble wall cladding fixed to the elevation. The granite slab to be fixed with necessaryclamps/ mortor. The rate to include the cost of all leads, lifts, wastage, tools and plants,curing, transport, Taxes, necessary bull nosing, grooves etc complete as directed by theArchitects

Sq m 5 .000064

1413.0

FULLY GLAZED DOOR --

a GLASS DOOR - 45 FRAME PROFILES & PATCH FITTINGS - Supply & Fixing ofGlass Door (Single Leaf) of 10mm toughened glass with DORMA Alexa System-45frames OR EQUIVALENT all around the door. Alexa EP End Profile frame of size45X50mm with seals with DORMA PT Std Patch Fitting with Top & Bottom patch,BTS 75V Floor Spring with Hold open (as per EN 1154) and necessary seals to beprovided all around the door frames. In case of Glass over panel Alexa OHP-EP45 OverPanel End profile to be used.The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profileshall be matt natural anodized, the Profile Manufacturer to supply all the necessaryclips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames: DORMA, Glass : Saint Giobain/Asahi

Sqm 214 .0158071








total amount

b PATCH FITTING DOOR- Providing and fixing of fixed glass door 5.3mxheight 2.1mwith openable shutters of size width 1.8mx height 2.1m using 12mm thick toughenedglass. The fixed glass shall be fixed in position using PT patch fittings like PT 90/ PT92 of Dorma make. The openable doors shall be fixed using top pivot PT 24, Top patchPT 20, bottom patch PT 10, corner lock US 10 with SS cover plates. The doors shall befixed on floor spring model BTS 75V with SS cover plate. Pull handle shall be of size600mm height x 32mm dia TGDI H 600. Necessary holes cutouts. etc to be provided asrequired. Cost to include drilling, cutting, necessary sealants, transportation etc incomplete.The rate to be quoted will be inclusive of all the above including the cost ofscaffolding, cost of floor springs and fixing cost for supply and erection of all hardwarefittings such as S.S. handle two pairs, Equivalent for each door, all as directed by theEngineer in charge of the work and concreted civil works including chipping the floor,fixing the floor springs, making good the disturbed floor, all leads and lifts transportetc., complete.The glazing will be taped with 3M Scotchcal 7725SE-324 Frosted crystalfilm the details shown in the relevant drawings. The Frosted crystal film is to besupplied to the correct size and shape as indicated in the relevant drawing and the filmis to be precut digitally with a plotter, brought to site and pasted over the glass. Anyadditional details required for shaping the film is to be obtained from the Architects inadvance before precut the film.

Sq m 167 .0054655

1414.0

SOLID DOOR - Supply and fixing of Flush door with teak wood frame of size 100mmx 50mm of all horizontal and verticals.Supplying and fixing 30mm thick solid flushshutter with steem beach lipping alround to the edges. The shutter will have 1mm thicklaminate on both side of approved shade & make. The rate to include cost of Iron-oxidised hinges 3nos 125mm long, cylindrical lock, 1no of tower bolt etc complete asdirected by the Architect. The rate to include apart from the above cost of hinges,handles and night lotch as specified in the drawing and as directed by Engineer incharge.

Sq m 125 .0031849








total amount

1415.0

SLIDING DOOR - Providing and fixing of Sliding door(MDF) of size900mmx2100.The shutter faces is finished with 1.5mm thick laminates of approvedcolour and shade. The rates are inclusive of frames, shutter and door fittings etc., asspecified in the drawing and as directed by Engineer in charge.

Sq m 10 .0002774

1416.0

FIRE RATED DOUBLE LEAF DOOR - DOOR SIZE : 1500 x 2100mmFabricatingand fixing of double leaf fire rated door with 2 hours fire rating as per details Doorjamb : General Fire rated metal jamb in Galvanized steel finished with paint as perIS277 as per details finished in automotive paint. Shutter : General metal shutters inGalvanized steel sheet finished with fire rated paint as per details. To have MS supportaround the frameHardware : Hinges :dorma or equivalent BB4 330 SS Ball BearingHinges 100 x75x3mm Door closer :dorma or equivalent Closer TS 71 with StandardArm Silver Finish lock : dorma or equivalent Martice Sash lock 752f with PSKCylinder with SS Lever Handle TH 126. Door Stopper : dorma or equivalent 200 FloorDoor stop 626 Ryobi concealed flush bolt body RB10 Rod For Ryobiflush Bolt RB10Length-265mm

Sq m 40 .0012604

1417.0

FIRE RATED WINDOWWINDOW SIZE : 1800mmX1400mmFabricating and fixingof double leaf fire rated door with 2 hours fire rating as per details. Window jamb :General Fire rated metal jamb in Galvanized steel finished with paint as per IS277 asper details finished in automotive paint. Shutter : General metal shutters in Galvanizedsteel sheet finished with fire rated paint as per details. To have MS support around theframe

Sq m 14 .0003631

1418.0

STEEL DOOR FOR LOCKER ROOM - Providing & Fixing Strong room doors of sizeHeight 2000mm and Width 915mm made of touch steel plates and armour plates whichfire and hammer resistance material. The frame is fabricated with anle iron. The doorshould have bolts, locking and automatic relocking device all as manufacturesspecifications. Approved make Guardwell or equivalent. The rate includes Grill gatewith locks complete with painting and all as directed by Engineer in charge.

Nos 1 .0007553








total amount

1419.0

SOLID DOOR WITH VISION PANEL - Supplying and fixing Partly solid and Partlyglazed door of minimum size 1200mm x 2100mm comprising of Teak wood frame size100mm x 50mm and the 35mm thick commercial shutter fixed. The shutter faces isfinished with 1.0mm thick laminates of approved colour and shade. The door glass of8mm thick glass panel of height 250mm X 250mm with etching and rest of bottomsolid all as shown in the drawing. The glass shutter edges will be protected with Teak-wood beading 6 x 15mm thick on both sides of glass and the beading will be stainedand sprayed with melamine finish.The shutter will be fixed to the door frame with threenos. of hinges Dorma make . The door closer will also be provided with Dorma makeNo.BTS 68. The shutter will also have lever handle with mortice lock of Dorma makeTH 123.All the exposed surfaces of the plywood is to be finished with 1.0mm thicklaminate of approved colour and make. The concealed faces of the plywood is to betreated against borer / termite / deterioration and painted with one coat of primer andtwo coats of paint. The work is to be carried out in a first class workmanship manner allas per details shown in the drawing and as directed at site etc., complete.

sqm 62 .0015797

1500.0

FENCING - Supply of cement is in the scope of contractor. Crushed stone sand can beused with due approval of project manager.

--

1501.0

Providing, hoisting and fixing up to floor five level precast reinforced cement concretework in string courses, bands, copings, bed plates, anchor blocks, plain window sillsand the like, including the cost of required centering, shuttering but excluding cost ofreinforcement, with 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominalsize). 1:1.5:3 (1 cement : 1.5 sand (zone-III) : 3 graded stone aggregate 20 mm nominalsize).

Cum 8 .0002053

1502.0

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-in-charge.

Sqm 50 .0001093

1600.0

BORE WELL --








total amount

1601.0

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable methodprescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running charges of allequipments, tools, plants & machineriesrequired for the job, all complete as per direction of Engineer -in-charge, upto 90 metredepth below ground level.

--

a 300 mm dia R mt 90 .0001228

1602.0

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable methodprescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running charges of allequipments, tools, plants & machineriesrequired for the job, all complete as per direction of Engineer -in-charge,beyond 90metre & upto 150 metre depth below ground level.

--

a 300 mm dia R mt 60 .0000955

1603.0

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. allcomplete, for all depths, as per direction of Engineer-in-charge

--

a 100 mm nominal size dia R mt 150 .00016

1604.0

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, inrecharge pit, in the required thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge.

Cu m 10 .0000339

1605.0

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in therecharge pit, over the existing layer of boulders, in required thickness, for all leads &lifts, all complete as per direction of Engineer-incharge.

Cu m 60 .0002292








total amount

1606.0

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm inrecharge pit, in required thickness over gravel layer, for all leads & lifts, all complete asper direction of Engineer -in-charge

Cu m 10 .0000382

1607.0

Gravel packing in tubewell construction in accordance with IS: 4097,includingproviding gravel fine/ medium/ coarse, in required grading & sizes as per actualrequirement, all complete as per direction of Engineerin-charge

Cu m 10 .0000433

1700.0

HORTICULTURE --

-- LANDSCAPING --

1701.0

Supplying, spreading and mixing red earth, sand and farm yard manure mixer withrequired base of chemical for control of pest and disease like fertilizers for rootregulator like DAP, Urea and super phosphate and for rate for the mix cost of red earthsand, manure, fertilizers and labour charges for the spreading and preparing the surfaceetc., complete directed by site engineer.

cum 210 .0011704








total amount

1702.0

WATER PROOFING FOR LANDSCAPE-Surface Preparation and angle fillets:Providing and laying angle fillets in the junctions between wall and slab with polymermortar of mix 1:3 admixed with Dr. Fixit pidicrete URP or Equivalent of dosage 20%by weight of cement etc completeProviding and appying two coats of two componentspolymer modified cementitious elastomeric high performance waterproofing coating ofDr.Fixit Fastflex or Equivalent, elongation more than 150% and inter coat time of 6-8hrs between two coats including surface preparation as per manufacturers specification,all material and labour complete in all respects.Providing and laying 20mm averagethick smooth finished cement plaster with C.M.1:4 admixed with Dr. Fixit PidiproofLW Plus - or Equivalent Integral waterproofing compound of dosage 200 ml per bag ofcement all material and labour complete in all respects. Providing and laying 4mm thickANTIROOT membrane of Dr. Fixit Torchshield AR4160 or Equivalent includingsurface preparation, applying solvented primer coat of Dr. Fixit torchshield primer andover lap of 100mm as per manufacturers specification, all material and labour completein all respects.A Protective geotextile mat of 200gm/Sqm minimum shall be loose laidover the membrane with minimum overlap of 100mm.Draining layer - Permeablemodular honeycomb drainage system of 20mm thick of make Versicell or DELTA orequivalent shall be provided for the landscape area.Supplying and laying of Non-wovenGeo-textile of 200gsm spread over the drainage system which acts as a landscapingfilter mad laid over with a overlap width of 50mm.50mm thick sand shall be spreadover the filter media, followed by landscape detailing.

Sq m 700 .0022414

1800.0

FALSE CEILING & FALSE FLOORING --








total amount

1801.0

STRETCH FALSE CEILING - Providing and fixing of approved make demountableceiling made of Polyester knitted fabric coated with polyurethane 309 T Translucentwhite with printing as per Architect design, Weight: From 200g to 250g / m2. FireRating:B s1 d0 (Ex M1) / Flame retardant. Fabric has trans lucid fabric for backlighting purpose with CE (Complies with European Union norms), stretch on selfsupporting frame Profile. The rates should be inclusive with the necessary frame worksfor the fixing arrangement of approved makestretched fabric panels and the tube lights.

Sq m 602 .0086653

1802.0

FALSE CEILING BOXING - Providing and fixing of 12mm thick MDF with 4mmthick veneer with approved patterns and grooves as per the drawing over the ceilinggrids (beam soffits & sides)sturdly fixed to RCC beams with necessary suitable sizescrews. The entire exposed veneer shall be polished with 2 coats of melamine polish indesired tint with spray gun all etc complete as specified in the drawing and as directedby the Banks Engineers.

Sq m 218 .0007895








total amount

1803.0

GYPSUM FALSE CEILING.Providing and fixing of gypsum board false ceilingsystem using 12.5mm thick gypsum board and GI framework suspension systemcomprising of GI perimeter channels of size 0.55mm thick (having one flange of 20mm& other flange of 30mm & a web of 27mm) along with perimeter of ceiling, screwfixed to brick wall / partition with the help of nylon sleeves & screws, at 610mmcenters. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick withtwo flanges of 15mm each) from the soffit at 1220mm centers with ceiling angle ofwidth 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat & steel expansionfasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm & twoflanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channelwith the help of connecting clip & in direction perpendicular to the intermediatechannel at 457mm centres. 12.5mm tapered edge gypboard ( conforming to IS 2095 -1982) is then screw fixed to ceiling section with 25mm drywallscrews at 230mmcentres. Screw fixing is done mechanically either with screw driver or drilling machinewith suitable attachment. Finally the boards are to be jointed and finished so as to havea flush look which includes filling and finishing the tapered and square edges of theboards with joining compound. Joint paper tape and two coats of Drywall Top Coatsuitable for Gypboard (as per recommended practices of India Gypsum). For Lightingfittings, grills diffusers and cutouts etc. have to be made with the frame of perimeterchannels of size 20mm x 27mm x 30mm x 0.55mm thick, supported suitably andshould be considered. False ceiling to be finished in two or more coats of plasticemulsion paint over one coat of primer so as to get a smooth and even finish. Angelbead is to be used at steps to get straight line finish. Edge bead to be used to protect theexposed Gypsum core of Gypboard specially cut edges of the openings for light fittings,diffusers, etc.as shown in the drawing complete all as directed by Bank's Engineer-in-Charge. The False ceiling is to be erected in any shape in levels as shown in drawing.No extra cost is payable for difference in shape and levels. The measurement will betaken in flat / horizontal / linear alignment.

Sq m 1,180 .0026819








total amount

1804.0

MINERAL FIBRE BOARD.-type 1 - Providing and fixing of Armstrong Dune/Equivalent Microlook Mineral Fibre Ceiling Tiles in true horizontal level false ceilinggrid of SILHOUTTE system manufacture by M/s.Armstrong world industries, US / UKusing hot dipped galvanized steel section, exposed surface chemically cleaned cappingprefinished in backed polyester paint main Tee of size 15 x 38 x 0.33mm at every1200mm c/c max and rotary stitched cross tee of size 15 x 38 x 0.33mm at every 1200c/c max and 15 x 22 x 0.457mm wall angle alround the wall to form grid size of 600mmx 600mm and suspending the grid using 2mm Gl rod and 6mm Nylon Rawl plug atevery 1200mm intervals at the main tee and laying Armstrong Prima Fine FissuredMicrolook Mineral Fibre Acoustic Ceiling tiles of size 600mm x 600mm x 15mm overthe formed grid, manufactured by M/s. Armstrong World Industries US / UK. The falseceiling has to be carried out to the shape lines and levels as given in the drawing. Therate to include all the above. The False ceiling is to be erected in any shape in levels asshown in drawing. No extra cost is payable for difference in shape and levels. Themeasurement will be taken in flat / horizontal / linear alignment.

Sq m 2,500 .0084395








total amount

1805.0

MINERAL FIBRE BOARD. -type 2Providing and fixing of Armstrong Dune max/Equivalent Microlook Mineral Fibre Ceiling Tiles in true horizontal level false ceilinggrid of SILHOUTTE system manufacture by M/s.Armstrong world industries, US / UKusing hot dipped galvanized steel section, exposed surface chemically cleaned cappingprefinished in backed polyester paint main Tee of size 15 x 38 x 0.33mm at every1200mm c/c max and rotary stitched cross tee of size 15 x 38 x 0.33mm at every 1200c/c max and 15 x 22 x 0.457mm wall angle alround the wall to form grid size of 600mmx 600mm and suspending the grid using 2mm GI rod and 6mm Nylon Rawl plug atevery 1200mm intervals at the main tee and laying Armstrong Prima Fine FissuredMicrolook Mineral Fibre Acoustic Ceiling tiles of size 600mm x 600mm x 15mm overthe formed grid, manufactured by M/s. Armstrong World Industries US / UK. The falseceiling has to be carried out to the shape, including curved shape to any degree linesand levels as given in the drawing. The rate to include all the above. The False ceiling isto be erected in any shape in levels as shown in drawing. No extra cost is payable fordifference in shape and levels. The measurement will be taken in flat / horizontal /linear alignment.

Sq m 250 .0015091

1806.0

METAL FALSE CEILING Manufacturer Specification of Plain Metal False CeilingSupplying and Installing of 0.5mm thick Powder Coated Galvanized Steel 2.5mm Lay-in-Tile 600x600mm Panels with Galvanized Steel 24mm Grid systemPanel Details(Galvanized Steel):Panels shall be fabricated from 0.50mm thick (TCT) Galvanizedsheet and Powder Coated on external surface shall have flange on all four sides to reston the exposed grid system to give 600 mm x 600 mm centre to centre of T.Details:Shall be hot dipped G.S. Tee section 3050 mm long main Tee 15 mm wide,Cross Tee 600 mm to form grid of 600 mm x 600 mm.(Armstrong or Equivalent)

Sq m 270 .0017428








total amount

1807.0

FALSE FLOORINGFALSE FLOORING FOR SERVER ROOM, NETWORKROOMFLOORING: Providing and fixing False Flooring in Server room with requirednos of Perforated tiles (with tampering mechanism) for circulating / revolveting forflow of conditioned air and other tiles are non perforated. The following are thespecification. Providing and fixing Unitile Raised Access Flooring System as per thefollowing specificationPanelUnitile USF-1000 OR Equivallent Access Floor panel ofsize 600 x 600mm shall be all steel welded construction, with an enclosed bottom panof 64 hemisperical cones and top plain sheet which are fuse welded at 124 locations toform a panel of an overall depth of 37mm. The inner empty core of the panel is injectedwith a light weight fire retardant, non combustible cementitious compound at highpressure to fill in all the crevices of the panel and ensures support of not less than 85%of the top surface area of the panel. The panel after cleaning, degreasing, phosphatingby 7 tank process is coated with 40 microns epoxy coat and is heated to achievemaximum adhesion and surface resistance.The panel is then laminated with 1.5mmthick fire retardant floor grade antistatic laminate / pvc on a semi-automated laminationline to ensure maximum bonding to the steel surface. The edges of the laminated / PVCare protected with black PVC edge trim 5mm wide on all sides. This edge trim ismechanically locked and sealed in place to avoid detachment.PANELLOADINGConcentrated Point Load: 450Kgs on a 25 x25mm square indented on thecentre of the panel with a maximum permissible deflecting of not more than2.5mmUniformly Distributed Load (UDL): 1350Kg/m2 with a maximum permissibledeflecting of not more than 2.0mm.FIRE RATING:The Panels shall confirm to Class O& Class 1 Fire Ratings tested as per BS 476 Part 6 & 7.SUB STRUCTURE -PEDESTAL ASSEMBLYSub Structure installed to support the panel shall be suitableto achieve a minimum finished floor height of 65mm to maximum of 600mm from theexisting floor level. Pedestal design shall confirm speedy assembly and removal forrelocation and maintenance. The assembly shall provide easy adjustment of levelingand accurately align panels for a maximum 30mm up and down in the vertical direction.Pedestals shall support an axial load of 2200kgs. Without permanent deflection and anultimate load of 3500kgs.The pedestal head assembly shall consist of a 75 x 75mm x

--








total amount3mm head projection welded to a 100mm length 17mm dia Bright rod stud and 2 checknuts for level adjustment and arresting vertical movement. The Pedestal head shallconsist of an anti-vibrational PVC cap, for panel and stringer location. The PedestalBases assembly shall consist of 21mm OD pipe of thickness 1.6mm projection weldedto a base plate of 100 x 100 x 2mm thick with stiffening folds.The sub structureassembly shall be suitably anchored to the floor with suitable adhesive or fastener asrecommended by the manufacturer. All steel components shall be electrogalvanized.STRINGERSThe Stringer is electro galvanized steel cold rolledconstruction specially designed for lateral stability, rolling loads and to support thepanels on all four sides for alignment. The stringer to have a counter sunk holes at bothends to accommodate bolting of the same to the pedestal head assembly. The stingersshall be 25 x 32 x 1mm x 570mm length etc complete all as per the drawing and asdirected by Engineer in charge.

-- INSTALLATION:It is important to ensure the sub floor on which the laminate is beinglaid is smooth, flat & hard & free from moisture, grease, etc. In case of uneven subfloor the same should be leveled by self leveling compound. The moisture level presentin the sub floor should be less than 8% before installation of the floor.The laminateshall have Arm lock or Equivallent locking system. It is required to use a water barrierof minimum of 250 microns and 2mm polyethylene foam under the planks. Theinstallation shall be undertaken as per the manufacturers installation instructions. Thework should be carried out as per patterns / design all as shown in the relevantdrawings. The rate to include the cost of all leads, lifts, wastages, tools and plants,design pattern etc complete as directed by the Engineer in charge.

Sq m 85 .0015068

1900.0

MISCELLANEOUS --

1901.0

VERTICAL BLINDS - Supply and fixing of vertical blinds 100mm wide fabric louverstreated with stain resistant coating, fixing to top channel with sliding and filtingarrangements complete. (Vista/Hunter douglus or Equivallent)

Sq m 1,351 .006141








total amount

1902.0

FROSTED GLASS WRITING BOARD. - Providing and fixing of 10mm thick frostedglass Writing board of size 2000 x 1000mm fixing with SS stud in wall / partition all asper the drawing and as directed by the Engineer in charge.

Nos 17 .0031029

1903.0

DROP DOWN AUTOMATIC PROJECTOR SCREEN - 2000 x 1500mm No 5 .0004886

1904.0

DROP DOWN PROJECTOR JACK (WITHOUT PROJECTOR) No 5 .0004205

1905.0

LACQUERED GLASS : The glass will be fixed as per the manufacturer specification. Sq m 2,044 .0397657

1906.0

ALUMINIUM SKIRTING - Skirting of 100mm high of aluminium of approved makeall as per the drawing.

R mt 3,108 .003214

1907.0

PLANTER BOX - Providing and fixing 12 mm MDF of approved make finished with4mm veneer and inner side 1.0mm thick laminate of approved shade and make coveringover planter box of required size, shape with necessary support as required as shown inthe drawing directed at site by Engineer-in-Charge( Measurement on MDF area)

Sq m 25 .0001372

1908.0

TRAP DOOR-Supplying and fixing rigidly in position a trap door to access air -conditioning indoor unit fixed the false celing. Trap door to be made of 12mm thickmarine grade plywood with 4mm teakwood lipping and fixed to gypsum board falseceiling with necessary second class teak wood frame work. Trap door to be providedwith necessary hinges, locking arrangements and a handle depressed in the shutter. Thehandle should project as and when required.Trap door to be finished in plastic emulsionpaint - 2 or more coats (matt finish) of approved colour and shade. Frame work to betreated for anti - termite and fire - retardant properties.

Sq m 15 .0001








total amount

1909.0

PELMET - Providing and fixing of 12mm thick MDF Pelmet of size 150x150mm withconcealed in false ceiling with necessary suitable size screws fixed tosoffit/walls/partitions. The pelmet must be sufficient to allow for fixing of Rollerblinds/Vertical blinds

Rmt 800 .0033334

2000.0

FURNITURES --

2001.0

AGM TABLE - Providing and fixing AGM Table with side unit of overall size 1900 x2000 x 750mm with side unit of 18mm thick MDF fixed with the MS angle support atthe bottom of the two end of table. The part of the table 12mm thick toughened glassfixed with SS pipes and steel plate as per the drawing. The table top will be provided25mm MDF finished with 1.50mm thick veneer finish of approved shade and make.The25mm thick table top is supported by 50mm dia SS pipe fixed with the base plate of150mm dia SS plate. From the SS pipe support, 3nos of 12.5mm dia SS rod is place forvertical support to the table top. 2 nos of 25mm dia SS rod is placed in a centre belowthe table fixed to the table support at one end and SS pipe to the other end. In front sidethe table will have 2.5mm thick SS perforated sheet of size 900 x 475mm fixed to thetable with 4nos of SS studs all as per shown in the drawing. A Movable Draw unit ofsize 450 x 500 x 600mm will be provided below the side table top. All exposed surfacesof the MDF will be finished with 1.5mm thick laminate of approved shade and make.The rate to be quoted will be inclusive of the side ledge as per details shown in thedrawings etc., complete. MDF with PVC edge banding and 1.5 thick half whitelaminate(for hidden surfaces)wherever required. The finishing should be smooth andthe work is to be carried out as per the drawing shown and as directed by Engineer-in-Charge.

Nos 39 .0051487








total amount

2002.0

DGM TABLE - Providing and fixing DGM Table with side unit of overall size 1650 x1750 x 750mm with side unit of 25mm thick MDF fixed with the MS angle support atthe bottom of the two end of table. The table top is camouflaged with 1.5mm thicklaminate of approved shade and make.25mm thick MDF table top is supported by50mm dia SS pipe fixed with the base plate of 150mm dia SS plate. From the SS pipesupport, 3nos of 12.5mm dia SS rod is place for vertical support to the table top. 2 nosof 25mm dia SS rod is placed in a centre below the table fixed to the table support atone end and SS pipe to the other end. In front side the table will have 2.5mm thick SSperforated sheet fixed to the table with 4nos of SS studs all as per shown in thedrawing. A Movable Draw unit of size 450 x 500 x 600mm will be provided below theside table top. All exposed surfaces of the MDF will be finished with 1.5mm thicklaminate of approved shade and make. The rate to be quoted will be inclusive of theside ledge as per details shown in the drawings etc., complete. MDF with PVC edgebanding and 1.5 thick half white laminate(for hidden surfaces)wherever required. Thefinishing should be smooth and the work is to be carried out as per the drawing shownand as directed by Engineer-in-Charge.

Nos 37 .0040096








total amount

2003.0

SECRETARY TABLE - Providing and fixing Secretary Table of overall size 1445 x1550 x 750mm. with side unit of 18mm thick MDF with 4.0mm thick veneer ofapproved shade and make all as shown in the drawing and as directed at site.The tabletop will be of 18mm thick MDF and finished with 4.0mm thick veneer of approvedcolour and shade. The table will have a footrest and will be of MDF 75 x 32mm. Thetable will be provided with a MS Powder coated keyboard tray and sliding over guiderails fixed to edges and size of keyboard tray will be 600 x 300mm. The table will alsohave M.S. wire manager.The table will also be provided 3 Nos. pullout drawers madeof 12mm thick MDF board and the drawers will be sliding through standard guide rail.The table will be provided with space for C.P.U. All exposed surfaces of the MDFboard will be finished with 4.0mm thick veneer of approved shade and make. The rateto be quoted will be inclusive of the side ledge as per details shown in the drawings etc.,complete. MDF with edge banding and 1.5 thick laminate(for hidden surfaces)wherever required. The finishing should be smooth and the work is to be carried out asper the drawing shown and as directed by Engineer-in-Charge.

Nos 11 .0005056








total amount

2004.0

GM TABLE - Providing and fixing GM Table with side unit of overall size 2500 x1900 x 750mm with side unit of 18mm thick MDF fixed with the MS angle support atthe bottom of the two end of table. The part of the table 12mm thick toughened glassfixed with SS pipes and steel plate as per the drawing. The table top finished with12mm thick Artificial Granite. All the exposed areas 4mm thick veneer finish ofapproved shade and make.25mm thick table top is supported by 50mm dia SS pipefixed with the base plate of 100mm dia SS plate. From the SS pipe support, 3nos of12.5mm dia SS rod is place for vertical support to the table top. In front side the tablewill have 2.5mm thick SS perforated sheet fixed to the table with 4nos of SS studs all asper shown in the drawing. The table will be provided with a keyboard tray fixed withguide and size of keyboard tray as shown in the drawing. The table will also have M.S.wire manager. The table is provided with CPU trolly as per drawing and movablestorage unit of 450x500x600mm.The rate to be quoted will be inclusive of the sideledge as per details shown in the drawings etc., complete. MDF with PVC edge bandingand 1.0mm thick half white laminate(for hidden surfaces) wherever required. Thefinishing should be smooth and the work is to be carried out as per the drawing shownand as directed by Engineer-in-Charge.

Nos 7 .0013259








total amount

2005.0

EXECUTIVE DIRECTOR TABLE - Providing and fixing Executive Director Tablewith side unit of overall size 2500 x 1900 x 750mm. The Table top will be providedGranite top and side unit of 18mm thick MDF fixed with the MS angle support at thebottom of the two end of table. The part of the table 12mm thick toughened glass fixedwith SS pipes and steel plate as per the drawing. The table top finished with 12mmthick Artificial Granite. All the exposed areas 4mm thick veneer finish of approvedshade and make.25mm thick table top is supported by 50mm dia SS pipe fixed with thebase plate of 100mm dia SS plate. From the SS pipe support, 3nos of 12.5mm dia SSrod is place for vertical support to the table top. In front side the table will have 2.5mmthick SS perforated sheet fixed to the table with 4nos of SS studs all as per shown in thedrawing. The table will be provided with a keyboard tray fixed with guide and size ofkeyboard tray as shown in the drawing. The table will also have M.S. wire manager.The table is provided with CPU trolly as per drawing and movable storage unit of450x500x600mm.The rate to be quoted will be inclusive of the side ledge as per detailsshown in the drawings etc., complete. MDF with PVC edge banding and 1.0mm thickhalf white laminate(for hidden surfaces) wherever required. The finishing should besmooth and the work is to be carried out as per the drawing shown and as directed byEngineer-in-Charge.

Nos 2 .0004146

2006.0

L SHAPED TABLE FOR CCTV ROOM - Providing and erecting of 1400x1700x750mm 'L' shaped table made of 18mm thick MDF board . All shape and size are as perdrawing The exposed faces of the MDF will be finished with 1.5mm thick laminate ofapproved colour and shade. The concealed faces of the MDF is to be treated againstborer / termite / deterioration and painted with one coat of primer and two coats ofenamel paint. The work is to be carried out in a first class workmanship manner all asper details shown in the drawing and as directed at site etc., complete. The rate to bequoted will be inclusive of all mentioned above as per details shown in the drawingsetc., complete.

Nos 2 .0000821








total amount

2007.0

LIBRARY TABLE - Providing and erecting of 1200mm dia Circular shape discussiontable of 750mm high and to accommodate 4persons as shown in the drawing. Thecircular table top of 12mm thick toughened glass will be resting over base support ofbox type made of 18mm thick commercial MDF overall size of 600 x 600 x 100mmand above the support, alternate corner will have 200 x 200mm x 200mm 'L' shape as avertical box type support of same MDF is fixed all as shape shown in the drawing. Theexposed faces of the MDF will be finished with 1.5mm thick laminate of approvedcolour and shade. The concealed faces of the MDF is to be treated against borer /termite / detoriation and painted with one coat of primer and two coats of enamel paint.The work is to be carried out in a first class workmanship manner all as per detailsshown in the drawing and as directed at site etc., complete. The rate to be quoted willbe inclusive of all mentioned above as per details shown in the drawings etc., complete.

No 2 .0000781

2008.0

LOW HEIGHT STORAGE UNIT - Providing and fixing of storage units 450mm indepth and 750mm in height of varying widths as per the site requirements. Unit to bemade of 18mm thick MDF board for all vertical and horizontal members inclusive ofthe openable shutters except the rear vertical surface which is of 6mm thickness. Allexposed MDF board surfaces to be finished in 1.0mm thick laminate of approvedcolour and shade. Rear external surfaces of unit to be finished in synthetic enamel paintso as the internal surfaces of the storage unit. All inside faces are to be finished withsynthetic enamel paint. All exposed MDF board edges to be finished in 4mm thicksteem beach lipping which is to be polished and finished in melamine. Unit to havenecessary locking arrangements (efficient gadgets or equivalent) handles, hardwares,tower bolt, hinges etc.

Sq m 26 .0007477








total amount

2009.0

FULL HEIGHT STORAGE UNIT - Providing and fixing of storage units 450mm indepth and 2100mm in height of varying widths as per the site requirements. Unit to bemade of 18mm thick MDF board for all vertical and horizontal members inclusive ofthe openable shutters except the rear vertical surface which is of 6mm thickness. Allexposed MDF board surfaces to be finished in 1.0mm thick laminate of approvedcolour and shade. Rear external surfaces of unit to be finished in synthetic enamel paintso as the internal surfaces of the storage unit. All inside faces are to be finished withsynthetic enamel paint. All exposed MDF edges to be finished in 4mm thick steembeach lipping which is to be polished and finished in melamine. Unit to have necessarylocking arrangements (efficient gadgets or equivalent) handles, hardwares, tower bolt,hinges etc.

Sq m 32 .0007517

2010.0

WRITING LEDGE - Providing and fixing writing ledge of width 300 mm. Thethickness of MDF board is 25mm. All details as shown in the drawingAll exposed MDFedges to be finished in 4mm thick steem beach lipping which is to be polished andfinished in melamine.

Nos 4 .0000722

2011.0

CLINICAL BERTH - Supply cot of size 1800x1200 with suitable mattress for clinicaluse. The rates are inclusive of supply,installation , transportation etc.,

No 2 .0000199








total amount

2012.0

DISCUSSION TABLE-TYPE A - Providing, erecting and fixing Circular shapeDiscussion table of all size 1200 dia and 750mm. The table made of vertical support of18mm thick MDF cut to shape as shown in the drawing Over the support ply, 18mmthick commercial MDF is covered in a three horizontal layer of shape shown in thedrawing. The table top will be 25mm thick commercial MDF in center portion of200mm width and finished with 1.5mm thick laminate of approved shade and make.The table top two side will have 12mm thick toughened glass with frosting and bevelededges. The concealed faces of the MDF is to be treated against borer / termite /deterioration and painted with one coat of primer and two coats of paint. The work is tobe carried out in a first class workmanship manner all as per details shown in thedrawing and as directed by the Engineer-in-ChargeThe conference table will containcable cubby and Mic plate as shown in section YY of drawing. The supports of tablewill be as per the details shown in the drawing and directed by the Architect. Allexposed surfaces of the MDF will be finished with 1.5mm thick laminate of approvedshade and make. The rate to be quoted will be inclusive of all mentioned above as perdetails shown in the drawings etc., complete.

Nos 3 .0001783








total amount

2013.0

DISCUSSION TABLE-TYPE B - Providing, erecting and fixing Rectangular shapeDiscussion table of over all size 1800 x 750 x 750mm. The table made of verticalsupport of 18mm thick MDF cut to shape as shown in the drawing Over the support ply,18mm thick commercial MDF is covered in a three horizontal layer of shape shown inthe drawing. The table top will be 25mm thick commercial MDF in center portion of200mm width and finished with 1.5mm thick laminate of approved shade and make.The table top two side will have 12mm thick toughened glass with frosting and bevelededges. The concealed faces of the MDF is to be treated against borer / termite /deterioration and painted with one coat of primer and two coats of paint. The work is tobe carried out in a first class workmanship manner all as per details shown in thedrawing and as directed by Engineer-in-ChargeThe table will contain cable cubby andMic plate as shown in section YY of drawing. The supports of table will be as per thedetails shown in the drawing and directed by the Architect. All exposed surfaces of theMDF will be finished with 1.5mm thick laminate of approved shade and make. The rateto be quoted will be inclusive of all mentioned above as per details shown in thedrawings etc., complete.

Nos 7 .0004855








total amount

2014.0

CONFERENCE TABLE- TYPE AProviding, erecting and fixing Conference table ofover all size 4800 x 1200 x 750mm. The table made of vertical support of 18mm thickMDF cut to shape as shown in the drawing Over the support ply, 18mm thickcommercial MDF is covered in a three horizontal layer of shape shown in the drawing.The table top will be 25mm thick commercial MDF in center portion of 200mm widthand finished with 1.5mm thick laminate of approved shade and make. The table top twoside will have 12mm thick toughened glass with frosting and beveled edges. Theconcealed faces of the MDF is to be treated against borer / termite / deterioration andpainted with one coat of primer and two coats of paint. The work is to be carried out ina first class workmanship manner all as per details shown in the drawing and as directedby the Engineer-in-Charge.The conference table will contain cable cubby and Mic plateas shown in section YY of drawing. The supports of table will be as per the detailsshown in the drawing and directed by the Architect. All exposed surfaces of the MDFwill be finished with 1.5mm thick laminate of approved shade and make. The rate to bequoted will be inclusive of all mentioned above as per details shown in the drawingsetc., complete.

Nos 5 .0010995








total amount

2015.0

CONFERENCE TABLE- TYPE BProviding, erecting and fixing Conference table ofover all size 6000 x 1200 x 750mm. The table made of vertical support of 18mm thickMDF cut to shape as shown in the drawing Over the support ply, 18mm thickcommercial MDF is covered in a three horizontal layer of shape shown in the drawing.The table top will be 25mm thick commercial MDF in center portion of 200mm widthand finished with 1.5mm thick laminate of approved shade and make. The table top twoside will have 12mm thick toughened glass with frosting and beveled edges. Theconcealed faces of the MDF is to be treated against borer / termite / deterioration andpainted with one coat of primer and two coats of paint. The work is to be carried out ina first class workmanship manner all as per details shown in the drawing and as directedby the Engineer-in-Charge The conference table will contain cable cubby and Mic plateas shown in section YY of drawing. The supports of table will be as per the detailsshown in the drawing and directed by the Architect. All exposed surfaces of the MDFwill be finished with 1.5mm thick laminate of approved shade and make. The rate to bequoted will be inclusive of all mentioned above as per details shown in the drawingsetc., complete.

No 1 .0002663

2016.0

CONFERENCE TABLE- TYPE C- Providing, erecting and fixing Rectangular shapeConference table of over all size 9700 x 2000 x 750mm. The table made of verticalsupport of 18mm thick MDF cut to shape as shown in the drawing The table top will be20mm thick Artificial marble. The concealed faces of the MDF is to be treated againstborer / termite / detoriation and painted with one coat of primer and two coats of paint.The work is to be carried out in a first class workmanship manner all as per detailsshown in the drawing and as directed by the Engineer-in-Charge.The conference tablewill contain cable cubby and Mic plate as shown in section YY of drawing. Thesupports of table will be as per the details shown in the drawing and directed by theEngineer-in-Charge. All exposed surfaces of the MDF will be finished with 4mm thickveneer of approved shade and make. The rate to be quoted will be inclusive of allmentioned above as per details shown in the drawings etc., complete.

No 1 .0003849








total amount

2020.0

DINING TABLE - Providing and fixing Dining table of size 900mmx900mmx750mmProviding of Stacking Dining table of given size. The table of approved colourand shade and as directed by the Engineer-in-Charge.

--

a Type-A Nos 40 .0008935

b Type-B Nos 2 .0000958








total amount

2023.0

MODULAR WORKSTATIONS - COMMON SPECIFICATION - Design, fabrication,supply and installation of factory made modular furniture for open office workstationsystem comprising of the following and as per enclosed drawing.PARTITION:Cubicalself supported type partition framework made out of extruded aluminum sections ( allas per the details in drawings)forming part of open office modular work stationfurniture system, for a total height of 1220mm consisting of concealed raceways150mm width at the bottom level and 125mm width above work surface level as perrequirements. All unit weights mentioned in the drawings for various aluminumextruded section shall deemed to be minimum weight,top caps, end strips, adjustablebolts, raceways cover plates etc. complete as per the details given in the drawings andas directed by Banks Engineer.Partitions panels with 9mm thick post laminated exteriorgrade MDF board upto work surface levels on both sides and rest above with 5.5mmapproved make plain glass panels with etching to pattern up to 1220mm height with150mm raceways at the bottom/skirting level and 125mm raceways below work surfacelevel.Partitions with 9mm thick post laminated exterior grade MDF board on both thesides up to work surface level and rest above with 9mm thick post laminated exteriorgrade MDF board on one side and other side with 10mm thick white magnetic boardfinished up to 1220mm height with 150mm raceways at the bottom/skirting level and125mm raceways above work surface level. Partitions with 9mm thick post laminatedexterior grade MDF board on both the sides up to work surface level and rest abovewith 9mm thick post laminated exterior grade MDF board one side and other side with9mm thick soft board finished with fabric of approved texture & shade up to 1220mmheight with 150mm raceways at the bottom/skirting level and 125mm raceways abovework surface level.Notes: (i) The race way covers shall be fabricated out of 2.5mmthick aluminum sheets/sections and powder coated to the approved color for aminimum thickness of 40-50 microns. Necessary cuttings shall be provided on thiscovers as per the site requirements of switch sizes/models.(ii)All MDF boards used inthe work shall be laminated with 1.5mm thick exterior grade laminate of approvedshade and make for exposed surfaces and 0.8mm thick balancing laminate forinner/concealed surfaces.(iii) Top covers, levelling screws, connectors, cable hangeres

--








total amountand other minor spares etc shall be as per the general specifications.WORKSURFACES:Providing and fixing 25mm thick post laminated exterior grade M.D.F.board laminated with 0.8 mm thick laminate of approved make and shade for workstation table tops with post formed half round exposed edges and 0.8 mm thickbalancing lamination at the bottom surface,as per the following sizes with necessary 16SWG MS sheets/sections powder coated brackets, fixing arrangements,approved edgebeading,etc., complete as shown in drawing No of following sizes: Pentagonal cornertype work surfaces of size 900mmx900mm.Square type work surfaces of size 600mmx600mm.L shape work surfaces of size 900mmx450mm L shape work surfaces of size1050mmx600mm L shape work surfaces of size 1200mmx600mm. L shape worksurfaces of size 1500mmx600mm. Vertical supports and Modesty PanelsProviding andfixing 25mm








total amount

-- thick post laminated exterior grade M.D.F. board laminated with 0.8mm thick laminateof approved make and shade for work station Gable end supports/modesty of table withpost formed half round exposed edges as per the following sizes with necessary 16SWG MS powder coated brackets/clamps, adjustable pivot supports,approved coloredge beading, etc., complete as shown in drawing no of following sizes:Vertical Gableend supports 600mmx725mmModesty Supports 1400mmx725mmModesty Supports1200 mmx725mmModesty Supports 1050 mmx725mmCPU Hanger:Fabricating,supplying and fixing in position below the work surfaces, CPU Hanger of required withadjustable width & height, overall size 530mmx250mm for placing CPU units, madeout of 16 SWG CRCA steel sheet powder coated to the required shade and forminimum thickness of 40-50 microns etc. complete.Fabricating, supplying and fixing inposition 500mmx350mmx75mm telescopic type sliding computer key board & mousetray made out of 18 SWG CRCA steel sheet / sections powder coated to the approvedcolor for a minimum thickness of 40-50 microns. Each key board units shall have anapproved locking arrangement with keys etc complete.Fabricating, supplying and fixingin position standard size ABS plastic coated Grommet with cable manager for Eachtable/workstation etc complete. PEDESTAL MOBILE DRAWER UNITS:Fabricating,supplying and placing in position, mobile pedestal drawer units of approximate size350mm(wide) x 600mm(height) and 550mm (deep) with 4 nos lockable castors. Theunit shall be fabricated out of 18 SWG CRCA steel sheets and shall be power coated tothe approved color for a minimum thickness of 40-50 Microns all over. Each unit shallhave 2 top drawers and one filing unit at the bottom with self lubricated slidingchannels. The top of the unit shall be provided with 12mm thick post formed laminatedexterior MDF board. The unit shall be provided with approved central lockingarrangement with single key hole for the top drawer with triplicate keys along with keychain. The units shall have recessed handles for each drawers etc. complete as perdrawing nos and as directed.FLOOR MOUNTED STORAGE UNITS: Supplying,fabricating and placing in positionfloor mounted lockable storage units having side hung shutters with heavy duty hinges(two leaf with two hinges for each shutter) with two intermediate shelves properly

--








total amountsupported and having stiffners at bottom.The body, shelfs and the shutters of the unitshall be made out of 18 SWG CRCA steel sheet with additional stiffners welded to thesheet for the top, bottom and intermediate shelf and the unit shall have two legs for thefull depth of the unit also made of 18SWG CRCA steel sheets and the entire unit shallbe power coated to approved shade for thickness of 40-50 microns. The units shall beprovided with in built recessed box type handle with a central locking arrangement ofapproved make and quality( with triplicate keys)fixed on one of the shutters The top ofunit shall be provided with 19mm thick exterior MDF board with 0.8mm thick laminatefor post formed laminate complete all as per drawing nos of followingsizes:1050mm(W)x1220mm(H) x450mm(D)900mm(W) x1220mm(H) x450mm(D)

a Type-A No 372 .0302072

b WORKSTATION -TYPE (B) - Providing and fixing Workstation table as per shapeand size as shown in drawing. The table top will be 25mm thick MDF finished with1.0mm thick laminate. Design make to be approved by Architect/Engineer.The tablewill be provided with a keyboard tray fixed with guide and size of keyboard tray will be600 x 300mm. The table will also have M.S. wire manager. The table is provided withCPU trolly as per drawing and movable storage unit of size 400 x 315 x 600mm heightmade out of 12mm & 18mm thick MDF board and with necessary PVC banding,telescopic drawer sides, locking arrangement, 100mm long brush finish SS handles etc.complete all as per drawing. A trunking box to be provided made of 18mm thick MDFboard at the top and bottom as per the drawing to allow electrical and data cable to beconcealed within. In curved areas 2 layers of 6mm thick MDF board to be used. All theexposed faces of the MDF board finished with 1.0mm thick laminate. The concealedfaces of the MDF is to be finished with 1.5 thick off white laminate. The work is to becarried out in a first class workmanship manner all as per details shown in the drawingand as directed at site etc., complete. The rate to be included all the above , loading,unloading and wastage etc.

Nos 24 .0014037








total amount

2024.0

SIDE TABLE-Type A - Supply and fixing of center table of size 900 x 450mm made of12mm thick MDF board for all vertical and horizontal members. The side curvedportion to be finished with 2 layers of 6mm thick MDF board with 1.5 thick laminatefinish. . The table top will be made of 19mm thick MDF board finished with 1.5 thicklaminate and bottom supported with 50x25mm paduk wood at 4 sides of the corner. Allexposed MDF edges to be finished in 4mm thick steem beech lipping. All otherexposed MDF surfaces which are not specially mentioned will have to be of 4mmsteem beech lipping and finished neatly with 1.5 thick laminate of approved colour withgrooves as per the drawing. Rate quoted to be inclusive of locking arrangements(efficient gadgets or equivalent), handles, drawer slides, hardware etc.The concealedfaces of the MDF is to be treated against borer / termite / detoriation.

Nos 43 .0006802

2025.0

SIDE TABLE-Type B - Supply and fixing of center table of size 750 x 450mm made of12mm thick MDF board for all vertical and horizontal members. The side curvedportion to be finished with 2 layers of 6mm thick MDF board with 1.5 thick laminatefinish. . The table top will be made of 19mm thick MDF board finished with 1.5 thicklaminate and bottom supported with 50x25mm paduk wood at 4 sides of the corner. Allexposed MDF edges to be finished in 4mm thick steem beech lipping. All otherexposed MDF surfaces which are not specially mentioned will have to be of 4mmsteem beech lipping and finished neatly with 1.5 thick laminate of approved colour withgrooves as per the drawing. Rate quoted to be inclusive of locking arrangements(efficient gadgets or equivalent), handles, drawer slides, hardware etc.The concealedfaces of the MDF is to be treated against borer / termite / detoriation.

No 7 .0000794

2100.0

RAIN WATER DOWN COMER --








total amount

2101.0

Providing, fixing, testing and commissioning of PVC rain water pipe confirming to IS13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, likeBends, Tees, Elbows, Collars, junction, inspection doors, offsets, access pipes, jointingwith rubber ring / solvent cement followed by application of leak proof adhesive likeFRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U'clamps with bolts, nuts and GI washers complete, for rain water pipe lines laid invertical shafts.

--

a 110mm dia - 6 kg/sq.cm pressure rated (for Terrace) Mtr. 225 .0005444

b 160mm dia - 6 kg/sq.cm pressure rated(for Terrace) Mtr. 100 .0003603

2102.0

Providing, fixing, testing and commissioning of PVC welded rain water head / khurrasdome type grating with puddle flange to fix head in RCC slab specially fabricated fromminimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x3 mm thick PVC flats (Round or Square) as per approved design The quoted rate shallinclude for necessary grouting the khurras base with approved sealant complete all asshown in the drawing and as specified.

--

a 150 x 150mm PVC Grating Nos. 8 .0000055

2103.0

Providing and fixing Constructing storm water catch basin internal clear dimension asmentioned below with 230 mm thick brick masonry wall using 1st class table mouldedbrick in 1:4 over a bed of 150 mm thick 1:4:8 PCC in cement motar 1:5 (1cement: 5fine sand), precast perforated RCC top slab in 1:2:4 Mix (1 cement: 2 sand: 8 gradedstone aggregate),with angle iron frame, inside plastring 15 mm thick with CM 1:3(1cement:3 fine sand) finished very smooth with floating coat of neat cement & makingchannel in cement concrete 1:2:4 (1cement: 2 sand: 4 gradedstone aggregate) neatlyfinished complete as per standard design and as per drawing. (The rate shall includenecessary earth work excavation in all types of soil excluding soft and hard rock, backfilling including consolidation disposing the excess earth to all leads curing, finishingetc., and back filling and completion)

--








total amount

a Inside size of 450 X 450mm & depth not exceeding 600mm including providing 450 x450mm precast perforated RCC cover with 50 x 50 x 6mm thick with MS L angleframe.

Nos. 1 .0000258

b Inside size of 600 x 600mm & depth not exceeding 600mm including providing 600 x600mm RCC cover with MS l angle frame of size 50 x 50 x 6 mm thick.

Nos. 1 .0000284

c Inside size of 900 x 900mm & depth not exceeding 900mm including providing 900 x900mm RCC cover with MS l angle frame of size 50 x 50 x 6mm thick.

Nos. 5 .000184

2104.0

Providing, laying, jointing testing and commissioning of and RCC hume pipes (NP2class) conforming to IS: 458 with collar joint in CM 1:3 packing the collar joints withas bestos rope dipped in cement slurry, finishing the surface smooth with neat cementslurry, curing & laid to correct levels and required slope below ground in trenches up torequired depth including excavation in all kind of soil excluding soft rock and hardrock, back filling with available earth in layer not exceeding 20 cm in depth, watering,levelling consolidation, disposing the excess earth to all lead etc., complete.

--

a 250 mm dia Mtr. 60 .0001064

b 300 mm dia Mtr. 110 .0002099

2105.0

Providing and fixing of 560mm did Heavy duty cast iron manhole cover with frame forover head and UG sump and storm water collection tank.

Nos. 10 .0002168








total amount

2106.0

Construction of percolation well / rain water harvest pit of 1.2 m dia and 3m deep withprecast RCC rings, covering the top with RCC slab including supply and fixing 600 x600 RCC MH cover CI / MS rungs etc. The quoted rate shall include earth workexcavation, back filling, removing excess earth and making good the floor. Thepercolation well harvest pit shall be constructed as per the detail drawings andspecification shall consist of:a)Alternate layers of brick bats, activated charcoal, gravel,pebbles and toped with fine sand for good infiltration. b)Bore hole of 160 mm dia fromthe bottom of percolation pit for a depth of 6m from the bottom of percolation pitdrilled by using auger manually.c)Bore hole to be filled with medium sized pebbles toprovide mechanical strength to the holes and enhance infiltration.d)Rate quoted shall beinclusive of earth work excavation, back filling, removing of excess earth as per theinstructions of engineer - in charge.

Nos. 6 .0008597

-- WATER SUPPLY --

2201.0

Providing & fixing of CPVC pipes confirming to ASTM standard including all CPVCfittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The workshall include cutting jointing with solvent cement pressure testing the joints / pipelinefor 10 kg/sq.cm hydraulic pressure, for 4 hours hours etc., making holes, includingchasing in solid block masonry walls with groove cutting machine to required widthand depth, making bores in walls, foundations and RCC slabs, making good the wallsand bores in CC or CM1:3 as applicable , clearing the debris, grouting of concealedpipes, MS hooks foer fixing pipes and making good the walls and floors. Also withnecessary clamps and support for ceiling hung system in side area, etc.

--

-- INTERNAL (CONCEALED IN WALL): COLD WATERSUPPLY --

a 20 mm dia (SDR-11) Mtr. 250 .0001662

b 25 mm dia (SDR-11) Mtr. 115 .0000938








total amount

2202.0

Providing & fixing of UPVC schdule-40 pipes confirming to ASTM standard includingall UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc.The work shall include cutting jointing with solvent cement pressure testing the joints /pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours hours etc., fixed on to the wallin vertical shafts / terrace with fabricated MS brackets of suitable size with GI 'U'clamps, bolts, nuts and GI washers including MS brackets including making good thewalls and floors. Note: Strictly use SDR-11 grade ASTRAL - CPVC pipe and fittingsfor internal hot water supply up to 50 mm dia.

--

-- VERTICAL SHAFT / TERRACE - COLD WATER SUPPLY : --

a 20 mm dia Mtr. 30 .0000228

b 25 mm dia Mtr. 90 .0000765

c 32 mm dia Mtr. 30 .0000293

d 40 mm dia Mtr. 90 .0000934

e 50 mm dia Mtr. 120 .0001446

2203.0

Providing, fixing testing and commissioning of CPVC ball valves (Astral / Ashirwadmake) including unions etc., or Gunmetal brass ball valve etc to Complete.

--

a 20 mm dia Nos. 7 .0000087

b 25 mm dia Nos. 35 .000044

c 32 mm dia Nos. 5 .0000137

d 40 mm dia Nos. 4 .0000173








total amount

2204.0

Providing, fixing, testing and commissioning of cast iron lever operated slim seal typebutterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrilerubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6 standards andincluding a set of GI flanges as per BS-10 table 1 including bolt nuts, and Neoprenerubber gaskets etc., Complete (Inter valve make).

--

a 50 mm dia Nos. 6 .0000416

b 65 mm dia Nos. 3 .0000265

c 110 mm dia : Nos. 2 .0000325

2205.0

Providing, fixing, testing and commissioning of slimseal flap type check valve with CIbody and cast steel disc pressure rating PN-10 Kg / sq.cm (make Intervalve).

--

-- 40mm dia Nos. 2 .0000064

-- 50 mm dia Nos. 5 .0000205

2206.0

Providing, fixing, testing and commissioning of brass`Y' / pot stainer screw type testedto 20 kg / sq.cm.

--

a 50 mm dia Nos. 1 .0000062

2207.0

Providing, fixing, testing and commissioning of brass body nickel plated automatic airrelease valves with brass splindle, NBR and joinfraniteelastomer,staniless steel springpolypropylenic float at the top most points of watersupply distribution ringmain. Make:RB / TBS / Cimbrio. or equivalent

--

a 20 mm dia Nos. 4 .0000188








total amount

2208.0

Providing, fixing, testing and commissioning of ball valves (for car wash) of brass bodynickel plated with stainless steel ball, lever operated with gun metal nozzel forconnecting rubber hose (RB/TBS/Cimbrio make or equivalent) and tested to 20 kg /sq.cm.

--

a 20 mm dia Nos. 2 .0000037

2209.0

Providing, fixing, testing and commissioning of masonry pedastals of size as mentionedwith bricks of class B50 designation in CM1:3 and finishing neat coat of floatingcement and making good.

--

-- Size of pedestal: --

a 230 x 230 x 300mm BW (0.016xRs 5487.7)+Pl(0.33xRs172.95) Nos. 20 .0000107

b 230 x 450 x 300mm BW (0.031xRs 5487.7)+Pl(0.66xRs172.95) Nos. 5 .0000052

2210.0

Supply and fixing 600mm long puddle flange consisting of 6mm thick welded GI / MSplate, flanges of sutible size hot dip galvanised to 100 micron properly fixed in walls ofwater tanks as per specifications and approved drawings and shall be of followingdiameters.

--

a 32 mm dia Nos. 2 .000003

b 40 mm dia Nos. 2 .0000049

c 50 mm dia Nos. 4 .0000122

d 65 mm dia Nos. 2 .0000072

e 110 mm dia Nos. 4 .0000202








total amount

2211.0

Providing, fixing, testing and commissioning of plastic pressurized ball float valve withgun metal lever of approved quality for OHT.

--

a 50 mm dia Nos. 1 .0000173

2212.0

Providing, fixing, testing and commissioning of pressure reducing valves of Hawkmake spring type suitable for working pressure from 0.5 bar to 7 bar pressure, with aadjustable screw for horizontal / vertical mounting and shall be of self damping typewith necessary ex nipple union, collars etc.

--

a 40 mm dia Nos. 2 .000029

b 50 mm dia Nos. 1 .0000174

2213.0

Supply and fixing Brass body Water meter with direct reading dial in KL with allintegral parts of gun metal or brass with necessary fittings such as threaded pieces,Unions, bolt nuts complete confirming to IS : 2372-1989

--

a 50 mm dia nos 1 .0000174

b 40 mm dia nos 1 .000022

2300.0

SEWAGE TREATMENT PLANT - Design, Engineering, and preparation of civil/structuaral drawings (GFC) and providing all equipment / Piping etc at site, erectiontesting and commisioning of equipments/ electricals/ piping for Sewage treatment plantinclusive of all types of taxes and duties. (Tenderer shall specify flow parameter and itstechnical specification of the equipments envisaged as per vendor design and systemrequirement to meet the guarantee parameters as per TNPCB.)

--








total amount

2301.0

M.S BAR SCREEN - Supplying, installing, testing and commissioning of bar screen of1 Nos. so as to remove the large sized particles present in the sewage water associatedwith set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45degree to the horizontal at 20 mm c/c with one no. handrack in GI. Bar rack fabricatedfrom MS bars shall be provided to cover the width of the screen chamber with a rackingarm for manual operation Size : 600 mm x 600 mm

--

a Supply: Set 1 .0000232

b Fixing: Set 1 .0000044

2302.0

RAW SEWAGE PUMPS: Supplying, installing, testing and commissioning of 2 Nos.(one working + one standby) Monobloc type raw sewage water pumps to pump sewagefrom equilisation sump to aeration tank at 2.25 cu.m / hr flow rate. The pump shall becoupled to adequate H.P. electrical motor, mounted on a common base frame made outof GI with necessary bolts, nuts. The pump shall be suitable for solid handling capacityof 32 mm. The pump shall be suitable for the following requirements:a)Flow rate - 2.25cu.m / hrb)Head - 12 - 15 mtrThe rate quoted shall be inclusive of: a)Earthing forpumps complete.b)1 no. pressure gauge 4inch dial with needle valve and tee fittings.c)2nos. of ball valves of brass body nickel plated with stainless steel ball, lever operated(RB/TBS / Cimbrio make) and tested to 20 kg / sq.cm.on delivery side. d)2 nos. of ballvalves of brass body nickel plated with stainless steel ball, lever operated (RB/TBS /Cimbrio make) and tested to 20 kg / sq.cm.on Sution side. e)2 nos. spring operated typegun metal non return valve tested to 10 kg/ sq.cm pressure including necessary fittingslike union, Hex, nipples etc., (make: Neka/leader ) on delivery side.f)Alarm indicationwith signal in the event of pump failure etc.g)GI manifold of suitable dia on deliveryside and suction side finished neatly with hot dip galvanizing to 100 microns withflanged end on either sides and collar provision for connectivity of above mentionedvalves.

--

a Supply: Set. 1 .0000809








total amount


2303.0

COARSE BUBBLE DIFFUSERS: Supplying, installing, testing and commissioning ofcoarse bubble duffuser with 90 mm dia X 800 mm long of HDPE pipe grid withnecessary orifices HDPE pipe of 6.0 kg / sq.cm pressure rating with removabledeflector to provide clog-free oxygen for aerationtank.

Lot 1 .0000099

2304.0

FIRE PORE DIFFUSERS - Supplying, installing, testing and commissioning of finebubble duffuser with 90mm dia x 1000mm long with membrane from EDI, USA/EQUIVALENT Shall consists of set of EPDM membranes, SS 304 clips PVC supportpipe(10 ksc pressure rating),PVC fitting(like elbows, tees, collors etc), nylon ropebraided hose with all accessories to make it retrievable.

Lot 1 .0000853

2305.0

MBBR MEDIA - Supplying, installing, testing and commissioning of MBBR MediaConsisting of the following:a)Type: Cyclindrical typeb) Surface area: As per System requirementc) MOC: PVC /PP

--


b Installation: Set. 1 .0000015








total amount

2306.0

AIR BLOWER - Supplying, installing, testing and commissioning of 2 Nos. ( oneworking + one standby) Twin Lobe design type air blower complete with motors,pulleys, One piece rigid CI casing and side plates, silencer, Accoustic enclosures, baseplate, Anti-friction bearings, Rotary oil sealings having horizontal configuration.Theblower shall be suitable for the following: a)Flow rate - 70.00 Cu.m / hr b)FlowPressure - 0.40 kg / sq. cm c)Head - 4 mtr a)Earthing for air blowers and motorscomplete.The rate quoted shall be inclusive of: b)1 no. pressure guage 4inch dial withvalve tee and fittings. c) Kay/ Equivalent make Twin Lobe roots type Airblower of70.00 cum/hr at 0.40 kg/sqcm capacity comprising of common base frame, suctionfilter, suction silencer, non return, V belt, guard, drive and driven pulleys, pressureguage, inter connection pipping, discharge silencer, anti vibration pads includingrequired motor of make Kirloskar or Beacone)Motor for Airblower to be provided f) 2nos. spring loaded gun metal Non return valve / silm seal flap type check valve with CIbody and cast steel disc tested to PN - 10 kg / sq.cm pressure including a set of GIFlanges as per BS - 10 table 1 including bolts, nuts, GI washers and neoprene rubbergaskets complete etc., ( inter valve /Audco make ) on the delivery side.g)GI manifold ofsuitable dia on delivery side finished neatly with hot dip galvanizing to 100 micronswith flanged end on either sides and collar provision for connectivity of abovementioned valves.

--



2307.0

Extra over item no. 2306 for Accoustic Enclosures two nos. to be provided one for eachAir blower without fail to ensure the noise level less than 20 DB.

set 1 .000254








total amount

2308.0

RETURN SLUDGE PUMPS: Supplying, installing, testing and commissioning of 2Nos. (one working + one stand-by) Return Sludge Disposal pumps to pump the sludgefrom Secondary settling tank back to aeration tank. The pump shall be horizantalCentrifugal non - clog pumps with wetted parts in CI construction.The pump shall becoupled to the adequate H.P. electrical motor and shall be mounted on a common baseframe with mani fold.The pump shall be suitable for the following requirements:Flowrate - 0.50 Cu.m / hrHead - 15 mtrThe rate quoted shall be inclusive of a)Earthing forpumps complete.b)1 no. pressure gauge 4inch dial with needle valve and tee fittings.c)2nos. of ball valves of brass body nickel plated with stainless steel ball, lever operated(RB/TBS / Cimbrio make) and tested to 20 kg / sq.cm.on delivery side. d)2 nos. of ballvalves of brass body nickel plated with stainless steel ball, lever operated (RB/TBS /Cimbrio make) and tested to 20 kg / sq.cm.on Suction side. e)2 Nos. of Gun Metal Ystainer with mesh for 100 microns screw type tested to 20 kg / sq.cm on suction side.f)2nos. spring operated type gun metal non return valve tested to 10 kg/ sq.cm pressureincluding necessary fittings like union, Hex, nipples etc., (make: Neka/leader ) ondelivery side.g)Alarm indication with signal in the event of pump failure etc.h)GImanifold of suitable dia on delivery side and suction side finished neatly with hot dipgalvanizing to 100 microns with flanged end on either sides and collar provision forconnectivity of above mentioned valves.

--










total amount

2310.0

SLUDGE DEWATERING SYSTEM:Supplying, installing, testing and commissioningof Plate and Frame type Mechanical sludge de-watering system consisting of: 110 mmcake thickness provided with hydraulic closing mechanism. One no. single mouldedFRP cylindrical type chemical solution tank of 200 litres capacity having detachablelids with moulded inserts for mounting of pumps and hand stirrer.Concretebed/pedestals of suitable size and thickness in cement concrete 1:2:4 for mounting thedoser base with anchor fastener, bolts and nuts and neatly finished smooth with floatingcoat of cement mortar. a. Quanitity - 1 nob. Make - Cleartekc. Model - As Per Manufacturerd. Type - Manual hydralic closinge. Hydraulic Model: As Per Manufacturerf. MOC -MSg. Plate size - As per system requirementh. No. of Plates - 11 PlatesI. No. of chamber - 10 Chambersj. Fliltration Area - 5.0 Sq.Mtrk. Cake Holding Cpaacity - 80 Litresl. Operating pressure - 8 Kg/Cm2

--

a Supply: Lot 1 .0003039

b Installation: Lot 1 .000003








total amount

2311.0

SCREW PUMP Supplying, installing, testing and commissioning Consisting of 2Nos.single screw double stage pumps flanged ends with CI body ally steel rotating partsetc., complete (one working + one standby) to pump sewage from sludge holding tankto filter press at 0.50 cum / Hr flow rate. The pump shall be coupled to the adequateH.P. electrical motor, mounted on a common base frame. The rate quoted shall beinclusive of: Earthing for pumps complete.a)Quantity - 2 Nosb)Make - Cleartekc)Model - As Per Manufacturerd)Type - Helical screw pumpe)Flow rate - 0.50m3/Hrf)Head - 60mg)Rating - 1 HPh)Power Supply - 3 PhaseI)Casing - CIj)Impeller -CIk)Seal - Mechanical seall)MOC - CIm)Enclosure - CIn)Class of Insulation - As PerManufacturer

--










total amount

2312.0

FILTER FEED PUMP:Supplying, installing, testing and commissioning of 2 Nos.Monobloc type pumps (One working and one standby) for pumping primary treatedwater through sand pressure filter, activated carbon filter, doser etc and finally totreated water sump The pump shall be coupled to the adequate H.P. electrical motor andshall be mounted on a common base frame with mani fold.The pump shall be suitablefor the following requirements:a)Flow rate - 3.50 Cu.m / hrb)Head - 30 - 35 mtrThe ratequoted shall be inclusive of: a)Earthing for pumps complete.b)1 no. pressure gauge4inch dial with valve tee and fittings.c)2 nos. of ball valves of brass body nickel platedwith stainless steel ball, lever operated (RB/TBS / Cimbrio make) and tested to 20 kg /sq.cm.on delivery side. d)2 nos. of ball valves of brass body nickel plated with stainlesssteel ball, lever operated (RB/TBS / Cimbrio make) and tested to 20 kg / sq.cm.onSution side. e)2 Nos. of Gun Metal Y stainer with mesh for 100 microns screw typetested to 20 kg / sq.cm on suction side.f)2 nos. spring operated type gun metal nonreturn valve tested to 10 kg/ sq.cm pressure including necessary fittings like union,Hex, nipples etc., (make: Neka/leader ) on delivery side.h)Alarm indication with signalin the event of pump failure etc.i)GI manifold of suitable dia on delivery side andsuction side finished neatly with hot dip galvanizing to 100 microns with flanged endon either sides and collar provision for connectivity of above mentioned valves.

--










total amount

2313.0

MS SAND PRESSURE FILTER: Supply, installation testing and commissioning ofsand pressure filter for filtration of suspended impurities in treated sewage water. Thefilter shall be suitable for 3.50 Cu.m / hr flow rate and designed to remove suspendedparticals / impurity in treated sewage water.The SPF shall be designed for a specificvelocity of 8 m3 / hr / sq.m area and the approx dia shall not be less than 800 mm diaThe Sand Pressure Filter unit shall comply with the following technicalrequirements:a)Flow rate - 3.50 Cu.m / hr b) Back wash duration - 15 minutesc)Painting Internal - Two coats of anti-corrosive epoxy paint d)Painting external - Twocoat of red oxide primer and above that a layer of two coats of enamel paint to be doneto give the finishing. f)Filtering Media - Sand/Pebblesg)pressure drop across unit. -0.7Kg/ sq.cm (max)h)Inlet turbidity - 1.00 as NTUi)Dia of sand pressure filter unit -900 mm dia.Further, the sand pressure filter unit shall comprise of the following:a)Thesand pressure filter vessel shall be fabricated out of MS plate (CRCA sheet of TATAmake) not less then 6mm thick with dish ends out of 8 mm thick plate and paintedinternally with two coats of anticorrosive epoxy paint after sand blasting and externallywith two coats epoxy primer followed by two coats of enamel paint of approvedcolour.b) The Sand Pressure filter shall be fitted with top inlet distribution and bottomcollecting system.c)Pressure gauge shall be provided at inlet and out let of SandPressure filter. d)V-Notch of suitable size fabricated out of 6 mm MS plate and finishedwith hot dip galvanizing to 100 microns inlcuding marking of flowrates indication formonitoring of backwash of Sand pressure filter. e)Initial charge of underbed andmultigrade filtering media as required.f)Complete set of valves, pressure gauge withneedle valve and frontal piping at inlet, outlet backwash and drain out point etc., withGI B class pipes (make: Tata / Jindal).g)Concrete bed/pedestals of suitable size andthickness in cement concrete 1:2:4 for mounting the filter base with anchor fastener,bolts and nuts and neatly finished smooth with floating coat of cement mortar.

--


b Installation: Set 1 .000003








total amount

2314.0

MS ACTIVATED CARBON FILTER (ACF):Supply, installation, testing andcommissioning of activated carbon filter for filtration and removal of colour in treatedsewage water. The filter shall be suitable for 3.50 Cu.m / hr flow rate and designed tooperate for 15 hours.The ACF shall be designed for a specific velocity of 8 m3 / hr /sq.m area and the approx dia shall not be less than 800 mm dia The activated carbonfilter unit shall comply with the following techinical requirement.a)Flow rate - 3.50 Cu.m / hrb)Back wash duration - 15 minutesc)Painting Internal - Two coats of anti-corrosive epoxy paintd)Painting external - Two coat of redoxide primer and above that a layer of two coats ofenamel paint to be done to give the finishing.e)Filtering Media - activated carbonf)Pressure Drop across unit. - 0.7kg / sq.cm (max)g)Dia of activated carbon filter unit - 800 mm dia.Further the activated carbon filter unit shall comprise the following:a)The activated carbon filter vessel shall be fabricated out of MS plate (CRCA sheet ofTATA make) not less then 6mm thick with dish ends out of 8mm thick plate andpainted internally with two coats of anticorrosive epoxy paint after sand blasting andexternally with two coats epoxy primer followed by two coats of enamel paint ofapproved colour.b)The Activated Carbon Filter shall be fitted with inlet distribution and bottomcollecting system.c)Pressure gauge shall be provided at inlet and out let of Activated Carbon filter.d)V-Notch of suitable size fabricated out of 6 mm MS plate and finished with hot dipgalvanizing to 100 microns inlcuding marking of flowrates indication for monitoring ofbackwash of Activated Carbon filter.e)Initial charge of underbed and multigrade filtering media as required.f)Complete set of valves, pressure gauge with needle valve and frontal piping at inlet,outlet backwash and drain out point etc., with GI B class pipes (make: Tata / Jindal).g)Concrete bed/pedestals of suitable size and thickness in cement concrete 1:2:4 for

--








total amountmounting the filter base with anchor fastener, bolts and nuts and neatly finished smoothwith floating coat of cement mortar.



2316.0

ULTRAVIOLET STERILIZER:Supply, installation, testing and commissioning of theultraviolet sterilizer suitable for flow rate of 3.50 cu.m / hr. The unit shall be suitablefor removing the bacteria in STP Treated water. The unit shall comply with thefollowing technical specifications. (Make: alfa water purifier / equivalent).a)The quartzsleeve protection for UV lamp.b)Unit shall be suitable for a working pressure of 5sq.cmc)Mounting brackets to be provided. d)Suitable for 220V single phase powersupply operation. e)Stainless steel type 304 electropolished purificationchamber.f)Single port providing visual indication of lamp.g)Wiper assembly tofacilitate periodic cleaning of quarty glassh)Removable flange heads for easy andcomplete dianembly.i)High instensity UV lamps rated for min of 7500 hourscontinuous use.j)Lamp monitor indicating the founction of U.V. lamp.k)Filter cartrigeassembly.l)Time elapse meter.

--










total amount

2317.0

ALUM DOSER: Supply, installation, testing and commissioning of electronic alumdosing unit with automatically operated dosing pump etc. The unit shall comprise of thefollowing: a)One no. single moulded FRP cylindrical type chemical solution tank of 50litres capacity having detachable lids with moulded inserts for mounting of pumps andstirrer.b)One on. Electronic diaphragm type positive displacement pump of Asia LMImake, for chemical dosing with plastic head. The electronic pump shall be operated on220V single phase supply and shall be mounted directly on the tank top.c)Complete setof pipes, valves and fittings, foot valve magnetic float switch to trip the dosing pump atlow level of chemical in the tank.d)The free chlorine content in the filtered water shallnot be less than 0.5 PPM.e)Concrete bed/pedestals of suitable size and thickness incement concrete 1:2:4 for mounting the doser base with anchor fastener, bolts and nutsand neatly finished smooth with floating coat of cement mortar. The pump shall besuitable for the following requirements:a)Min. Actuating Pressure - 0.3 kg/sq cmb)Max.Working Pressure - 0.5 kg/sq cmc)Max. Temperature - 50 degree Centigraded)Dosingflow range- As per system requirement e)Head - 5 - 10 mtr

--










total amount

2318.0

FILTER FEED PUMP FOR ULTRAFILTRATION: Supplying, installing, testing andcommissioning of 2 Nos. Submersible type (One working and one standby) feed pumpsfor pumping the water from final treated water sump to Ultra filtration for furthertreatemen/polishing/removal of micro organisms and bacteria. The pump shall becoupled to adequate H.P. electrical motor, mounted on a common base frame made outof 'GI' with necessary bolts, nuts,saddle and mesh. The pump shall be provied withsuitable enclosure with strainer arrangement for the protection submersible pumps. (15Hours Operation)The pump shall be suitable for the following requirements:Flow rate -1.65 Cu.m / hrHead - 35 mtrThe rate quoted shall be inclusive of: Earthing for pumpscomplete.1 no. pressure gauge 4inch dial with valve tee and fittings.2 nos. of ball valvesof brass body nickel plated with stainless steel ball, lever operated (RB/TBS / Cimbriomake) and tested to 20 kg / sq.cm.on delivery side. 2 nos. spring operated type gunmetal non return valve tested to 10 kg/ sq.cm pressure including necessary fittings likeunion, Hex, nipples etc., (make: Neka/leader ) on delivery side.CPVC manifold ofsuitable dia on delivery side with flanged end on either sides and collar provision forconnectivity of above mentioned valves.

--



2319.0

FRP BASKET INLINE STRAINERSupplying, installing, testing and commissioning of1 Nos.(one working) Inline strainer of 2.5mm before the UF system to protect themembranes bioreactor tank from thhe coarse solids entering the UF processY-Type,fabricated, flnged end strainer.

--










total amount

2320.0

ULTRA FILTRATION MEMBRANES Supplying, installation, testing andcommissioning of Ultra filteration system to separate the treated effluent andconcentrated MLSS to make it suitable for reuse in HVAC system the U.F. system shallconsists of the following:U.F : 25 Cu.m / dayMembrane area per membrane module -24 sqm

--



2321.0

CHEMICAL CLEANING SYSTEM - CLEANING PURPOSE (1 W + 1 S)Supply,installation, testing and commissioning of chemical cleaning unit with automaticallyoperated pump etc., The unit shall comprise of the following: a)One no. single mouldedFRP cylindrical type Hydochloric Acid solution tank of 100 litres capacity havingdetachable lids with moulded inserts for mounting of pumps and stirrer.b)One on.Electronic diaphragm type positive displacement pump of Asia LMI make, forhydrochloric acid with plastic head. The electronic pump shall be operated on 220Vsingle phase supply and shall be mounted directly on the tank top.c)Complete set ofpipes, valves and fittings, foot valve magnetic float switch to trip the dosing pump atlow level of polymer in the tank.d)Concrete bed/pedestals of suitable size and thicknessin cement concrete 1:2:4 for mounting the doser base with anchor fastener, bolts andnuts and neatly finished smooth with floating coat of cement mortar. The pump shall besuitable for the following requirements:a)Min. Actuating Pressure - 0.3 kg/sq cmb)Max.Working Pressure - 0.5 kg/sq cmc)Max. Temperature - 50 degree Centigraded)Dosingflow range- As per system requirement e)Head - 3 - 5 mtrf)Chemical: Hydrochlorideacid and Caustic

--










total amount

2322.0

UF CLEANING TANK: Supply, installation, testing and commissiong of UF cleaningtank to mixing chemicals for futher use.Tank Capacity: 100 Ltrs

--



2323.0

HYPODOSING SYSTEM (1 W+ 1S)Supply, installation, testing and commissioning ofon line automatic electronic hypo dosing unit with automatically operated dosing pumpetc., The unit shall comprise of the following: a)One no. single moulded FRPcylindrical type Hypodosing solution tank of 100 litres capacity having detachable lidswith moulded inserts for mounting of pumps and stirrer.b)One on. Electronicdiaphragm type positive displacement pump of Asia LMI make, for hypo dosing withplastic head. The electronic pump shall be operated on 220V single phase supply andshall be mounted directly on the tank top.c)Complete set of pipes, valves and fittings,foot valve magnetic float switch to trip the dosing pump at low level of Hypodosing inthe tank.d)The free chlorine content in the filtered water shall not be less than 0.5PPM.e)Concrete bed/pedestals of suitable size and thickness in cement concrete 1:2:4for mounting the doser base with anchor fastener, bolts and nuts and neatly finishedsmooth with floating coat of cement mortar. The pump shall be suitable for thefollowing requirements:a)Min. Actuating Pressure - 0.3 kg/sq cmb)Max. WorkingPressure - 0.5 kg/sq cmc)Max. Temperature - 50 degree Centigraded)Dosing flowrange- As per system requirement e)Head - 3 - 5 mtr

--










total amount

2324.0

ULTRA FILTRATION BACK WASH PUMPS: Supplying, installing, testing andcommissioning of 2 Nos. Submersible type (One working and one standby) pumps forpumping the back wash water from Ultrafiltration to the nearest manhole / chamber.The pump shall be coupled to adequate H.P. electrical motor, mounted on a commonbase frame made out of 'GI' with necessary bolts, nuts,saddle and mesh. The pump shallbe provied with suitable enclosure with strainer arrangement for the protectionsubmersible pumps.The pump shall be suitable for the following requirements:Flowrate - 4.50 Cu.m / hrHead - 20 mtrThe rate quoted shall be inclusive of: Earthing forpumps complete.1 no. pressure gauge 4inch dial with valve tee and fittings.2 nos. ofball valves of brass body nickel plated with stainless steel ball, lever operated (RB/TBS/ Cimbrio make) and tested to 20 kg / sq.cm.on delivery side. 2 nos. spring operatedtype gun metal non return valve tested to 10 kg/ sq.cm pressure including necessaryfittings like union, Hex, nipples etc., (make: Neka/leader ) on delivery side.CPVCmanifold of suitable dia on delivery side with flanged end on either sides and collarprovision for connectivity of above mentioned valves.

--



2325.0

ULTRA FILTRATION SKID: Supplying, installing, testing and commissioning MSfabricated skid coated with two coats of epoxy paint with required supports andaccessories of Ultra filtration Unit

--










total amount

2326.0

MCC PANEL Supply, fabrication, erection testing and commissioning of combined /common motor control center panel (MCCP) . The panel shall be of noncomparmentalised for air blowers, filtered water pumps. The MCC shall be sheet steelfabricated, finished with powder coating of approved color, and of floor mounted, freestanding cubicle type with incoming MCC TP and N bus bars and outgoing with fuseswitch units, starter relays, over load, UV earth fault protection with time delaysequence operator etc. The panel shall have Voltmeter, Ammeter and indicating lampson the incoming side only indicating lamps for the pumps on outgoing side to indicatethe operation mode. The panel shall be complete in all respectsand prior to the supply,fabrication drawing shall be submitted for consultants approval.The rate quoted shall beinclusive of the following: Earthing for panels .Dry run protection arrangement for thefollowing : a)Raw Sewage Pumpb)Air Blowers & motors:c)Return SludgePumpd)Screw Pumpe)Filter Feed Pump f)Audio / visual alarm indication in the eventof malfuntioning of STPNotes: 01The quoted rates shall include plant and piping worksfor the STP consists of interconnecting piping, fittings, valves within the battery limit ofthe Sewage Treatment Plant MOC of the piping shall be GI B Class (TATA ORJINDAL Make)02The quoted rates shall be inclusive of Earthening Works,Instrumentation and Level switches etc. complete., 03The consumables and chemicalsrequried for intial start up and till testing and commissioning and handing over ofSewage Treatment Plant shall be borne by the vendor.

--



-- WATER TREATMENT --








total amount

2401.0

FILTER FEED WATER PUMPS - Supplying, installing, testing and commissioning of2 Nos. of Submersible Type pumps (One working + One stand by) for pumping thewater from raw water U.G. sump through pressure sand filter, softener and finally tofiltered water sump . The pump shall be coupled to adequate H.P. electrical motor,mounted on a common base frame made out of 'GI' with necessary bolts and nuts.Thepump shall be provided with suitable enlosure with strainer arrangement for theprotection of pumps.The pump shall be suitable for the following requirements:a)Flowrate - 3.10 Cu.m / hrb)Head - 30 mtr.The rate quoted shall be inclusive of: a)Suitableindoor wall mounting type control panel with auto / manual change - over switchincluding dry run protection arrangement, wiring upto panel, earthing for pumps andpanels etc. complete.b)Industrial type electronic liquid level controllers with stainlesssteel probes / sensors or float switch for automatic operation.c)1 no. pressure gauge4inch dial with needle valve and tee fittings.d)2 nos. of ball valves of brass body nickelplated with stainless steel ball, lever operated (RB/TBS / Cimbrio make) and tested to20 kg / sq.cm.on delivery side. e)2 nos. spring operated type gun metal non return valvetested to 10 kg/ sq.cm pressure including necessary fittings like union, Hex, nipplesetc., (make: Neka/leader ) on delivery side.f)Alarm indication with signal in the eventof pump failure etc.g)GI manifold of suitable dia on delivery side finished neatly withhot dip galvanizing to 100 microns with flanged end on either sides and collar provisionfor connectivity of above mentioned valves.

--










total amount

2402.0

FRP - SAND PRESSURE FILTER - BORE WELL WATER: a)Supply, installationtesting and commissioning of FRP and pressure filter (SPF) for filtration of rawborewell water. The filter shall be suitable for 3.10 cu.m /hr flow rate and designed tooperate for 8 hours and to suspended particals / impuring in raw borewell water. Thesizing / diameter of SPF shall be designed based on specific velocity 12 cu.m / hr / sq.marea and the approx dia. shall not be less than 800 mm diaThe filtration unit shallcomply with the following technical requirements:a)Flow rate - 3.10 cu.m / Hrb) Backwash duration - 15 minutesc)Filtering Media - Sand/Pebblesd)Pressure drop across unit.- 0.7Kg/ sq.cm (max)e)Inlet turbidity - 1.00 as NTUf)Minimum operating pressure -3.0kg / sq.cm.g)Maximum Test pressure - 5.0kg / sq.cm.h)Dia of sand pressure filterunit - 800 mm dia.Further, the sand pressure filter unit shall comprise of thefollowing:a)The sand pressure filter vessel shall be made out of FRP (make: Structuralvessel)bThe sand pressure filter shall be fitted with top inlet distribution and collectingsystem..c)Orifice board for monitoring back wash flow to be fitted.d)Initial charge ofunderbed and multigrade filtering media as required.e)Pressure gauge with needle valveshall be provided at inlet and out let of Sand Pressure filter. f)V-Notch of suitable sizefabricated out of 6 mm MS plate and finished with hot dip galvanizing to 100 micronsinlcuding marking of flowrates indication for monitoring of backwash of Sand pressurefilter. g)The sand pressure filter shall be fitted with a Operating valve pressure gaugewith needle valve and frontal face pipe work done with PVC pipes of agricultural seriesmade as per IS 4985, pressure rated to 15 kg / sq.cm, and of self fit type with solventcement joint including necessary PVC injection moulded fittings like elbows, collars,tees etc., followed by application of leak proof adhesive like FRP paste etc., complete(make: Supreme / Finolex).h)Concrete bed/pedestals of suitable size and thickness incement concrete 1:2:4 for mounting the filter base with anchor fastener, bolts and nutsand neatly finished smooth with floating coat of cement mortar.

--










total amount

2403.0

FRP - ACTIVATED CARBON FILTER (ACF): Supply, installation, testing andcommissioning of activated carbon filter for filtration and removal of colour and odourin bore well water. The filter shall be suitable for 3.10 cu.m / Hr flow rate and designedto operate for 8 hours.The sizing / diameter of ACF shall be designed based on aspecific velocity of 18 cu.m/ hr / sq.m area and the approx dia shall not be less than 600mm diaThe Activated Carbon Filter unit shall comply with the following techinicalrequirement.a)Flow rate - 3.10 cu.m / Hrb)Back wash duration - 15 minutesc)FilteringMedia - activated carbond)Pressure Drop across unit. - 0.7kg / sq.cm (max)e)Turbidityin Filtered water - Less than 3 NTUf)Minimum operating pressure - 3.0kg /sq.cm.g)Maximum Test pressure - 5.0kg / sq.cm.h)Dia of activated carbon filter unit -600 mm dia.Further, the Activated Carbon Filter unit shall comprise of thefollowing:a)The Activated Carbon Filter vessel shall be made out of FRP (make:Structural vessel)b)The Activated Carbon Filter shall be fitted with top inlet distributionand collecting system..c)Orifice board for monitoring back wash flow to befitted.d)Initial charge of underbed and multigrade filtering media as required.e)Pressuregauge with needle valve shall be provided at inlet and out let of Activated Carbon filter.f)V-Notch of suitable size fabricated out of 6 mm MS plate and finished with hot dipgalvanizing to 100 microns inlcuding marking of flowrates indication for monitoring ofbackwash of Activated Carbon filter. g)The Activate Carbon Filter shall be fitted with aoperating valve pressure gauge with needle valve and frontal face pipe work done withPVC pipes of agricultural series made as per IS 4985, pressure rated to 15 kg / sq.cm,and of self fit type with solvent cement joint including necessary PVC injectionmoulded fittings like elbows, collars, tees etc., followed by application of leak proofadhesive like FRP paste etc., complete (make: Supreme / Finolex).h)Concretebed/pedestals of suitable size and thickness in cement concrete 1:2:4 for mounting thefilter base with anchor fastener, bolts and nuts and neatly finished smooth with floatingcoat of cement mortar.

--









total amount


2404.0

FRP - WATER SOFTENER - DOMESTIC USE :Supply,installation testing andcommissioning of softener for softeninig of raw bore well water for domestic use. Thesoftener shall comprise of the following:a)Softener Vessel:The Softener vessel shall bemade out of FRP (make: Structural vessel)b) The Softener shall be fitted with top inletdistribution and collecting system..c)Piping and Valves:The softener shall be fitted witha operating valve pressure gauge with needle valve and frontal face pipe work donewith PVC pipes of agricultural series made as per IS 4985, pressure rated to 15 kg /sq.cm, and of self fit type with solvent cement joint including necessary PVC injectionmoulded fittings like elbows, collars, tees etc., followed by application of leak proofadhesive like FRP paste etc., complete (make: Supreme / Finolex).Pressure gauge withneedle valve shall be provided at inlet and out let of Softener V-Notch of suitable sizefabricated out of 6 mm MS plate and finished with hot dip galvanizing to 100 micronsinlcuding marking of flow rates indication for monitoring of rinsing softenerd)FRPRegeneration Equipment:One FRP salt saturator tank for storage and preparation ofbrine solution having 250 Litres by volume and of approximate size of as permanufacturer.e)Resin Material:First charge of high capacity polystyrene bead typecation exchange resin of approved quality. The water testing kit shall also be included.The quantity of resin shall be 500 L for hardness of 700 PPM. Make of resin shall beThermax / Auchtel. f)Water Meter:A gun metal water flow meter (make:Dashmesh/Kranthi) shall be supplied & installed to register the amount of water passedthrough the softener.g)Concrete bed/pedestals of suitable size and thickness in cementconcrete 1:2:4 for mounting the filter base with anchor fastener, bolts and nuts andneatly finished smooth with floating coat of cement mortar. DESIGN DATA1)Dailyrequirement - 25.00cu.m / day

--










total amount

2405.0

CHLORINE DOSER:Supply, installation, testing and commissioning of on lineautomatic electronic sodium hypo dosing unit with automatically operated dosing pumpetc., The unit shall comprise of the following: a)One no. single moulded FRPcylindrical type chemical solution tank of 100 litres capacity having detachable lidswith moulded inserts for mounting of pumps and stirrer.b)One on. Electronicdiaphragm type positive displacement pump of Asia LMI make, for chemical dosingwith plastic head. The electronic pump shall be operated on 220V single phase supplyand shall be mounted directly on the tank top.c)Complete set of pipes, valves andfittings, foot valve magnetic float switch to trip the dosing pump at low level ofchemical in the tank.d)The free chlorine content in the filtered water shall not be lessthan 0.5 PPM.a)Min. Actuating Pressure - 0.3 kg/sq cmb)Max. Working Pressure - 0.5kg/sq cmc)Max. Temperature - 50 degree Centigraded)Dosing flow range - As Persystem Requiremente)Head - 5 - 6 mtr

--



2406.0

ALUM DOSER: Supply, installation, testing and commissioning of electronic alumdosing unit with automatically operated dosing pump etc. The unit shall comprise of thefollowing: a)Single moulded FRP cylindrical type chemical solution tank 100 litrescapacity having detachable lids with moulded inserts for mounting of pumps andstirrer.b)Electronic diaphragm type positive displacement pump for alum dosing withplastic head. The electronic pump shall be opperated on 220V single phase supply andshall be mounted directly on the tank top.c)Complete set of pipes, valves and fittingsfoot valve magnetic float switch top trip the dosing pump at low level of alum in thetank.a)Min. Actuating Pressure - 0.3 kg/sq cmb)Max. Working Pressure - 0.5 kg/sqcmc)Max. Temperature - 50 degree Centigraded)Dosing flow range - As Per systemRequiremente)Head - 5 - 6 mtr

--









total amount


2407.0

RO FEED CUM MEMBRANE CLEANING SYSTEM PUMP - Supplying, installing,testing and commissioning of 2 Nos. of Monobloc type RO feed cum membranecleaning system pumps (One working + one stand by) for pumping the primary treatedwater through Micron cartridge filter, high pressure pump.The pump shall be coupled tothe adequate H.P. electrical motor and shall be mounted on a common base frame withmani fold.The pump shall be suitable for the following requirements:a)Flow rate ofeach pump - 1.00 Cu.m / hrb)Head - 35 mtr.c)MOC - SS 304The rate quoted shall beinclusive of: a)Suitable indoor wall mounting type control panel with auto / manualchange - over switch including dry run protection arrangement, wiring upto panel,earthing for pumps and panels etc. complete.b)Industrial type electronic liquid levelcontrollers with stainless steel probes / sensors or float switch for automaticoperation.c)1 no. pressure gauge 4inch dial with needle valve and tee fittings.d)2 nos. ofball valves of brass body nickel plated with stainless steel ball, lever operated (RB/TBS/ Cimbrio make) and tested to 10 kg / sq.cm.on delivery side. e)f)2 Nos. of Gun MetalY stainer with mesh for 100 microns screw type tested to 10 kg / sq.cm on suctionside.g)2 nos. spring operated type gun metal non return valve tested to 10 kg/ sq.cmpressure including necessary fittings like union, Hex, nipples etc., (make: Neka/leader )on delivery side.h)Alarm indication with signal in the event of pump failure etc.i)GImanifold of suitable dia on delivery side and suction side finished neatly with hot dipgalvanizing to 100 microns with flanged end on either sides and collar provision forconnectivity of above mentioned valves.

--










total amount

2408.0

MEMBRANE CLEANING SOLUTION TANK: Supply erectioning, testing andcommissioning of circular FRP tank of capacity as mentioned below. The tank shallinclude cover with hinges, necessary provision for inlet, outlet, drainout and overflowarrangement. a)Storage tank of capacity 500 litres

--



2409.0

MICRON CARTRIDGE FILTER: Supply, installation, testing and commissioning ofMicron Cartridge Filter for removal of finer suspended particles in the water. Themicron cartridge filter shall be suitable for following requirements / specifications.a)Micro Level - 5b)Size of cartridge - 10inch c)Type of cartride - Pleatedd)MOC -FRPe)Flow rate - 1.00 cu.m / hrf)Qty / No. of Cartridge - 2 Nos.g)Maximum pressuredrop across the unit - 0.5 kg / sq.cmh)Silt Density Index (SDI) -- less than 5i)Microncartridge filter shall be fitted with side inlet and top outlet distribution and collectionsystem. j)Micron cartridge filter shall be provided with pressure guage with needlevalve 2 nos. (1 on the inlet and 1 on the out let)

--










total amount

2410.0

HIGH PRESSURE PUMP: Supplying, installing, testing and commissioning of 2 nos.vertical type Monobloc in - line High pressure pumps (One working and one standby)for pumping the water to RO membrane assembly. The pump shall be coupled to theadequate H.P. electrical motor and shall be mounted on a common base frame withmanifold. The pump shall be suitable for the following requirements:a)Flow rate ofeach pump - 1.00 Cu.m / hrb)Head - 100 - 120 mtr.c)MOC - SS 304(However, theactual head to be selected by the vendor as the system design requirement and as perROSA analysis)The rate quoted shall be inclusive of: a)Suitable indoor wall mountingtype control panel with auto / manual change - over switch including dry run protectionarrangement , wir ing upto panel , ear thing for pumps and panels etc .complete.b)Industrial type electronic liquid level controllers with stainless steel probes /sensors or float switch for automatic operation.c)1 no. pressure gauge 4inch dial withneedle valve and tee fittings.d)2 nos. of ball valves of brass body nickel plated withstainless steel ball, lever operated (RB/TBS / Cimbrio make) and tested to 10 kg /sq.cm.on delivery side. e)2 nos. of ball valves of brass body nickel plated with stainlesssteel ball, lever operated (RB/TBS / Cimbrio make) and tested to 10 kg / sq.cm.onSuction side. f)2 Nos. of Gun Metal Y stainer with mesh for 100 microns screw typetested to 10 kg / sq.cm on suction side.g)2 nos. spring operated type gun metal nonreturn valve tested to 10 kg/ sq.cm pressure including necessary fittings like union,Hex, nipples etc., (make: Neka/leader ) on delivery side.h)Alarm indication with signalin the event of pump failure etc.i)GI manifold of suitable dia on delivery side andsuction side finished neatly with hot dip galvanizing to 100 microns with flanged endon either sides and collar provision for connectivity of above mentioned valves.

--










total amount

2411.0

RO MEMBRANE Supplying, installing and commissioning of the RO membraneassembly unit with necessary manifold, supporting system, clamps, brackets,interconnecting piping, valves, pressure guages etc., with backish water membrane(filmtek / Hydronautics make) for removal of TDS in the borewell water. (The TDS inraw borewell water is around 2000 PPM and hardness is aound 560 PPM). The ROmembrane assembly shall be as per the following requirement and specification(However the actual requirement of membrane as per the system design / demand shallbe verified by the vendor with respect to ROSA Analysis) a)Type of Membrane:Blackishb)Size of membrane: 4inch dia x 40inch c)No. of membarane in one vessel /tube - 5 Nos.d)No. of membarane = 10 Nos.e)No. of Vessel= 2 Nos.g)Type of pressurevessel / tube - PVC Pipe ( 10 kg - 15 kg/ sq.cm)

--



2412.0

MCC PANEL - Supply, fabrication, erection testing and commissioning of combined /common motor control center panel (MCCP) . The panel shall be of noncomparmentalised for air blowers, filtered water pumps. The MCC shall be sheet steelfabricated, finished with powder coating of approved color, and of floor mounted, freestanding cubicle type with incoming MCC TP and N bus bars and outgoing with fuseswitch units, starter relays, over load, UV earth fault protection with time delaysequence operator etc. The panel shall have Voltmeter, Ammeter and indicating lampson the incoming side only indicating lamps for the pumps on outgoing side to indicatethe operation mode. The panel shall be complete in all respectsand prior to the supply,fabrication drawing shall be submitted for consultants approval.The rate quoted shall beinclusive of the following: Earthing for panels .Dry run protection arrangement for thefollowing : *Filter feed for WTP*Filter feed pump for RO Plant*RO cum membranecleaning system pump*High Pressure pump*Audio / visual alarm indication in theevent of malfuntioning of WTP / RO Plant

--








total amount



-- PUMPS & ACCESSORIES --

2501.0

FLUSHING WATER TRANSFER PUMPS: Supply, installation, testing andcommissioning of 2 Nos. (one working + one standby) submersible type pump forpumping the STP treated water from Final UF Sump to Overhead tank at Terrace level.The pump shall be coupled to adequate H.P. electrical motor, mounted on a commonbase frame made out of GI with necessary bolts, nuts,saddle and mesh.. The pump shallbe provide with suitable enclosure with starainer arrangement for the protection forsubmersible pumps.The pump shall be suitable for the following requirements:a)Flowrate of each pump - 10.0 Cu.m / hrb)Head - 45 Mtr. The rate quoted shall be inclusiveof: a)Suitable indoor wall mounting type control panel with auto / manual change - overswitch including dry run protection arrangement, wiring upto panel, earthing etc.complete.b)Industrial type electronic liquid level controllers with stainless steel probes /sensors or float switch for automatic operation.c)1 no. pressure gauge 4inch dial withvalve tee and fittings.d)2 nos. cast iron lever operated slim seal type butterfly valves ofCI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10kg / sq.cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges asper BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gasketsComplete etc., (inter valve / audco make) on the delivery sidee)2 Nos. slimseal flaptype check valve with CI body and cast steel disc pressure rating PN-10 Kg / sq.cmincluding a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, andneoprene rubber gaskets Complete etc., (inter valve / audco make) on the deliveryside.f)Alarm indication with signal in the event of pump failure etc.g)GI manifold ofsuitable dia on delivery side finished neatly with hot dip galvanizing to 100 micronswith flanged end on either sides and collar provision for connectivity of abovementioned valves.

--








total amount

a Pump set 2 .0002658

b Control Panel set 1 .0000591

2502.0

STORM WATER DISPOSAL PUMPS:Supply, installing, testing and commissioing of2 Nos. submersible type storm water disposal pumps (1 W + 1S ) for pumping stormwater from storm water collection sump at basement floor to the nearest muncipal stormwater drain at ground level. The pump shall be coupled to adequate H.P. electricalmotor, mounted on a common base frame.The pump shall be capable of handling siltand muck in the storm waterThe pump shall be suitable for the followingrequirements:a)Flow rate of each pump- 6.00 Cu.m / hrb)Head - 15 Mtr. The ratequoted shall be inclusive of: a)Suitable indoor wall mounting type control panel withauto / manual change - over switch including dry run protection arrangement, wiringupto panel, earthing etc. complete.b)Industrial type electronic liquid level controllerswith stainless steel probes / sensors or float switch for automatic operation.c)1 no.pressure gauge 4inch dial with valve tee and fittings.d)2 nos. cast iron lever operatedslim seal type butterfly valves of CI body and spheroidal graphite iron disc (SGiron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GIwashers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on thedelivery sidee)2 Nos. slimseal flap type check valve with CI body and cast steel discpressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (intervalve / audco make) on the delivery side.f)Alarm indication with signal in the event ofpump failure etc.g)GI manifold of suitable dia on delivery side finished neatly with hotdip galvanizing to 100 microns with flanged end on either sides and collar provision forconnectivity of above mentioned valves.

--

a Pump Set 4 .0004725

b Control Panel Set 2 .0001063107 SIGNATURE OF BIDDER WITH SEAL







total amount

2503.0

WTP BACK WASH WATER PUMPS:Supply, installing, testing and commissioing of2 Nos. submersible type pumps (both working during backwash of filter ) for pumpingback wash water from the Water treatment Plant to the nearest storm water drain atground level. The pump shall be coupled to adequate H.P. electrical motor, mounted ona common base frame made out of GI with necessary bolts, nuts,saddle and mesh.. Thepump shall be provide with suitable enclosure with starainer arrangement for theprotection for submersible pumps.The pump shall be suitable for the followingrequirements:a)Flow rate of each pump - 3.50 Cu.m / hrb)Head - 15 Mtr. The ratequoted shall be inclusive of: a)Suitable indoor wall mounting type control panel withauto / manual change - over switch including dry run protection arrangement, wiringupto panel, earthing etc. complete.b)Industrial type electronic liquid level controllerswith stainless steel probes / sensors or float switch for automatic operation.c)1 no.pressure gauge 4inch dial with valve tee and fittings.d)2 nos. cast iron lever operatedslim seal type butterfly valves of CI body and spheroidal graphite iron disc (SGiron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GIwashers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on thedelivery sidee)2 Nos. slimseal flap type check valve with CI body and cast steel discpressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (intervalve / audco make) on the delivery side.f)Alarm indication with signal in the event ofpump failure etc.g)GI manifold of suitable dia on delivery side finished neatly with hotdip galvanizing to 100 microns with flanged end on either sides and collar provision forconnectivity of above mentioned valves.

--

a Pump Set 2 .0002363

b Control Panel Set 2 .0000611








total amount

2504.0

FILTERED WATER FOR DOMESTIC PURPOSE:Supplying, installing, testing andcommissioning of 3 Nos. Monobloc type Hydropneumatic pumps (two working andone standby) for pumping the water from underground sump to distribution ring mainthrough hydropneumatic pressure vessel for domestic purposes. The pump shall becoupled to the adequate H.P. electrical motor of and shall be mounted on a commonbase frame with mani fold.The pump shall be suitable for the following requirements:a)Flow rate of each pump - 15.00 Cu.m/Hrb)Cut-in I pump - 2.50 kg / sq.cmc)Cut-off Ipump - 3.50 kg / sq.cmd)Cut-in II pump - 3.50 kg / sq.cme)Cut-off I pump - 4.50 kg /sq.cmf)Pump design head - 50 m The pumps shall be provided with: a)3 Nos. Pressureswitch with caliberation.(if required)b)1 no. pressure gauge 4inch dial with valve teeand fittings.c)3 nos. cast iron lever operated slim seal type butterfly valves of CI bodyand spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg /sq.cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges as perBS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Completeetc., (inter valve / audco make) on the delivery side.d)3 nos. cast iron lever operatedslim seal type butterfly valves of CI body and spheroidal graphite iron disc (SGiron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GIwashers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on theSuction side.e)3 Nos. of Gun Metal 'Y' stainer with mesh for 100 microns screw typetested to 20 kg / sq.cm on suction side.f)3 Nos. slimseal flap type check valve with CIbody and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flangesas per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gasketsComplete etc., (inter valve / audco make) on the delivery side.g)Voltage Stabilizer ofsuitable capacity to ensure uniform power supply to pump panel h)Automatic Boostercard for automatic start and stop of pumps and sequencing of the entire system g)GImanifold of suitable dia on delivery side and suction side finished neatly with hot dipgalvanizing to 100 microns with flanged end on either sides and collar provision forconnectivity of above mentioned valves.i)Micro processor based Built - in electricalcontrol panel with motor starter relays, single phase preventor, dry run protection,

Set 1 .0008565








total amountindicating lamps, ON - OFF push buttons, alarm indication with signal in the event ofpump failure, etc., and shall be suitable for 415 +/- 10% volts & 50Hz electric supply.

2505.0

Design, supply, erection, testing and commissioning of 453 litres capacitypolypropelene (PP) pressure tank with pre-charged diaphram, self supported, withnecessary manhole, flange for inlet / outlet provisions, duly fitted with safty valve /pressure relief valve, pressure gauge and Danfoss make pressure switch of crystalmake, magnetic level switches 2nos, vent valve, with two sets of gaskets, junction boxand wiring, complete with electrics etc., as required:(Pressure tank make: Welmate /ELBI)

Set 3 .0003987

2506.0

BORE WELL PUMPS AND ACCESSORIES :DEPTH OF BORE WELL ISCONSIDERED AS 200 FEET.Supplying, installing, testing and commissioning of 2Nos. Submersible type Deep Bore well pumps for pumping the Bore well water fromIndividual bore well to Raw water U.G. sump at ground Level. The rate quoted shall beinclusive of: a)Suitable control panel indoor wall mounting type with change overswitch including dry run protection. b)1no. pressure gauge 4inch dial with valve tee andfittings.c)Alarm indication with signal in the event of pump failure etc.The pump shallbe suitable for the requirements as mentioned below: i )Bore Well No. 1 & 2Discharge- 5.00 M3 / hr Head - 65 to 70 mtrs Range.

--



2600.0

ELECTRICAL WORKS --

2601.0

WIRING INSIDE ROOM/ HALL --








total amount

a Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable in surface / recessed medium classPVC conduit, with modular switch, modular plate, suitable GI box and earthing thepoint with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc asrequired. (One Point one way) - GROUP C (length upto 5 mtrs)

Nos. 203 .0005656

b Wiring for two numbers of light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GIbox and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable etc as required. (Two Point one way) - (length upto 8 mtrs)

Nos. 408 .0013529

c Wiring for three numbers of light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GIbox and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable etc as required. (Three Point one way) - (length upto 11 mtrs)

Nos. 147 .0005475

d Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed medium class PVC conduit, 2 waymodular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required. (Two pointtwo way for staircase)

Nos. 14 .0000417

2602.0

Modules --

a Supplying and fixing following size/ modules, GI box alongwith modular base & coverplate for modular switches in recess etc as required. (3 Module (100mmX75mm)) - for5/6A & 15/16A switches & sockets

Nos. 280 .0001906

b Supplying and fixing following size/ modules, GI box alongwith modular base & coverplate for modular switches in recess etc as required. (8 Module (125mmX125mm)) - forwork station - raw power

Nos. 755 .0008253








total amount

c Supplying and fixing following size/ modules, GI box alongwith modular base & coverplate for modular switches in recess etc as required. (8 Module (125mmX125mm)) - forcomputer points

Nos. 755 .0008253

2603.0

Switches --

a Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. (5/6amps switch)

Nos. 966 .0002987

b Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. (15/16amp switch)

Nos. 824 .0003457

c Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. (3 pin5/6 amp socket outlet)

Nos. 966 .000288

d Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. (6 pin15/16 amp socket outlet)

Nos. 824 .000464

2604.0

CIRCUIT WIRING --

a Wiring for circuit/ submain wiring along with earth wire with 2 X 2.5 sq. mm + 1 X 2.5sq. mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required

Mtrs. 9,800 .0049413

b Wiring for circuit/ submain wiring alongwith earth wire with 2 X 4 sq. mm + 1 X 4 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required

Mtrs. 720 .0004452








total amount

c Wiring for circuit/ submain wiring alongwith earth wire with 2 X 6 sq. mm + 1 X 6 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required

Mtrs. 70 .0000585

d Wiring for circuit/ submain wiring alongwith earth wire with 2 X 10 sq. mm + 1 X 6 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required

Mtrs. 10 .0000113

e Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface/ recessed mediumclass PVC conduit as required (4 X 6 sq. mm + 2 X 6 sq. mm earth wire)

Mtrs. 265 .0003852

f Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface/ recessed mediumclass PVC conduit as required (4 X 10 sq. mm + 2 X 6 sq. mm earth wire)

Mtrs. 115 .0002269

2605.0

CONDUITS --

a Supplying and fixing of 20 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 100 .000021

b Supplying and fixing of 25 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 150 .0000381

c Supplying and fixing of 32 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 50 .0000164

2606.0

DISTRIBUTION BOARD --

a SPN --113 SIGNATURE OF BIDDER WITH SEAL







total amount

i) Supplying and fixing of 2 + 12 way, Double door, single pole and neutral, sheet steel,MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator).

Nos. 7 .0000297

b TPN --

i) Supplying and fixing of 4 way (4 + 12), Double door, horizontal type three pole andneutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, completewith tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required.(But without MCB/RCCB/Isolator)

Nos. 3 .0000243

ii) Supplying and fixing of 6 way (4 + 18), Double door, horizontal type three pole andneutral, sheet steel MCB distribution board, 415 volts, on surface/ recess, complete withtinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required.(But without MCB/RCCB/Isolator)

Nos. 7 .0000685

iii) Supplying and fixing of 8 way (4 + 24), Double door, horizontal type three pole andneutral, sheet steel MCB distribution board, 415 volts, on surface/ recess, complete withtinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required.(But without MCB/RCCB/Isolator)

Nos. 14 .0001634

c VTPN --

i) Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, verticaltype, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powderpainted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Nos. 3 .0000497








total amount

2607.0

CIRCUIT BREAKER --

a Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, Nos. 420 .0002674

b Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, Nos. 7 .000018

c Supplying and fixing 40A, four pole, 415 volts, isolator in the existing MCB DBcomplete with connections, testing and commissioning etc. as required.

Nos. 24 .0000589

d Supplying and fixing 63A, four pole, 415 volts, isolator in the existing MCB DBcomplete with connections, testing and commissioning etc. as required.

Nos. 3 .0000075

e Supplying and fixing 25A, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.

Nos. 7 .0000425

f Supplying and fixing 40A, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.

Nos. 72 .0004555

2608.0

STEEL ENCLOSURE --

a Supplying and fixing TP sheet steel enclosure on surface/recess along with16/25/32amps 415 volts

Nos. 10 .0000323

b Supplying and fixing DP sheet steel enclosure on surface / recess along with 25/32amps240 volts

Nos. 1 .0000023

c Supplying and fixing TP sheet steel enclosure on surface / recess along with 100amps415 volts TP MCCB complete with connections, testing and commissioning etc. asrequired.

Nos. 3 .0000669








total amount

d Supplying and fixing TP sheet steel enclosure on surface / recess along with 125amps415 volts TP MCCB complete with connections, testing and commissioning etc. asrequired.

Nos. 2 .0000469

e Supplying and fixing TP sheet steel enclosure on surface / recess along with 200amps415 volts TP MCCB complete with connections, testing and commissioning etc. asrequired.

Nos. 6 .0002901

A2607 LIGHT FIXTURES --

a Supplying and installing of 220V, 40W ceiling mounted recessed type LED luminaireof Philips make RC380B LED-30-6500 PSE OD WH or equivalent.

Nos. 819 .0084197

b Supplying and installing of 220V, 7W wall mounted type LED luminaire of Philipsmake myVision 7W B22 6500K A60 IND or equivalent.

Nos. 53 .0000335

c Supplying and installing of 220V, 15W ceiling mounted recessed type LED luminaireof Philips make philips -SM518C /15watts or equivalent.

Nos. 312 .002691

d Supplying and installing of 220V, 20W wall/ceiling surface mounted type LEDluminaire of Philips make ESSENTIAL LEDtube 1200 mm20W865 T8 IND I/20Wattsor equivalent.

Nos. 385 .0011871

e Supplying and installing of 220V, 10W wall mounted type LED luminaire of Philipsmake ESSENTIAL LEDtube 600 mm10W865 T8 IND I/10watts or equivalent.

Nos. 17 .0000789

f Supplying and installing of 220V, 1200mm sweep, ceiling fan with regulator completewith all necessary down rods, clamp/bolt & nuts and fixing accessories etc.

Nos. 15 .0001113

g Supplying and installing of 220V, 150mm diamenter medium duty, exhaust fancomplete with all necessary louvers, clamp/bolt & nuts and fixing accessories etc.

Nos. 24 .0001433

h Supplying and installing of 220V, 70W facade LED type luminaire of Philips makeTEMPO LED - BVP410 LED 70CW HE NB S1 PSU GR or equivalent. The item alsoincluding of suitable LDR sensor panel and with accessories.

Nos. 12 .0002601








total amount

i Supplying and installing of 220V, 10W Spot LED type luminaire of Philips makeDN191B LED6S-6500 PSUWH or equivalent.

Nos. 13 .0000702

j Supplying and installing of 220V, Sign board LED type luminaire size of appx.10'x2'6inch or equivalent.

LS. 1 .0000796

k Supplying and installing of 220V, 10W Downlight type LED luminaire of Philips makeDN192B LED9S-6500 PSU WH S1 Di 1xLED/4000K PSU or equivalent.

Nos. 1,144 .0067038

l Supplying and installing of 220V, 6W/metre LED Strip light luminaire of Philips makeLinea Flexible LED strip / tape(white) 6W/m 4500K or equivalent.

Mtrs. 2,177.5 .0085122

A2608 PANELS --

a Supply, installation, testing and commissioning of 415V Main switch board fabricatedwith 14/16 G CRCA sheet, powder coated and complete with all incoming andoutgoing switch gears as per the following. Suitable aluminuim busbar, control wiring,MD indication with alarm, control fuses, seperate metering compartment with multifunction meter, phase indication and compatible with EMS & RS485 etc., electrical andmechanical interlocking facility between EB & DG incomers, safety features and itemsincluding necessary fixing accessories.Incomer:i)1250A, 50KA, FP, EDO ACB - 1 no.as EB incomerii)1250A, 50KA, FP, EDO ACB - 1 no. as DG incomerOutgoing:i)630A,36KA, FP MCCB - 1 no.ii)400A, 36KA, FP MCCB - 4 nos.iii)200A, 36KA, FP MCCB- 4 nos.

Set. 1 .0042928

b Supply, installation, testing and commissioning of Diesel Generator synchronizeddistribution panel fabricated with 14/16G CRCA sheet, powder coated and completewith two numbers of 800A TP ACB as incomer, one number of 1250A ACB asoutgoing, with 1250A Al. Bus Bar, control wiring, separate metering compartment withmulit function meter, phase indication and safety features etc., the items includingnecessary fixing accessories etc.

Set. 1 .003553








total amount

c Supply, installation, testing and commissioning of 415V LT Distribution panelsfabricated with 14/16G CRCA sheet, powder coated and complete with the switchgearsas below. suitable aluminium busbar, wiring, separate metering compartment with mulitfunction meter, phase indication and safety features etc., the items including necessaryfixing accessories.

--

d MLSB - Incomer i)400A, 36KA, FP MCCB - 1 no.Outgoing:i)315A, 36KA, FP MCCB- 1 no.ii)63A, FP MCB - 4 nos.

Set. 1 .0010907

e Utility SB-1 - Incomer i)200A, 36KA, FP MCCB - 1 no.Outgoing:i)100A, 25KA, FPMCCB - 1 no.ii)63A, FP MCB - 4 nos.

Set. 1 .0004928

f UPS SB- Incomeri)400A, 36KA, FP MCCB - 1 no.Outgoing:i)315A, 36KA, FP MCCB- 3 nos.

Set. 1 .000758

g A/C SBIncomeri)630A, 36KA, FP MCCB - 1 no.Outgoing:i)200A, 36KA, FP MCCB -8 nos.ii)125A, 25KA, FP MCCB - 2 nos.

Set. 1 .0011419

h APFCR SB - 100KVAR APFCR panel with 8 stages of capacitor bank. Set. 2 .0016313

i Supply, installation, testing and commissioning of 415V LT Distribution panelsfabricated with 14/16G CRCA sheet, powder coated and complete with the switchgearsas below. suitable aluminium busbar, electrical & mechanical interlocking between twoincomers, wiring, separate metering compartment with mulit function meter, phaseindication and safety features etc., the items including necessary fixingaccessor ies .Floorwise UPS SBIncomeri)200A, 36KA, FP MCCB - 2nos.Outgoing: i )63A, FP MCB - 4 nos .

Set. 7 .0035282

2609.0

RISING MAIN - Lighting Rising Main --








total amount

a Supplying, installing on wall, testing and commissioning of 315 amps 25KA SC for 1sec Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts,50Hz A.C. supply with enclosure made of 1.6mm thick steel sheet duly powder coatedin convenient sections complete with 4 Nos aluminium bus bars, necessary joints &expansion joints, fire barrier at each floor, provision of tapping at every metre,continuous earthing with 2 Nos aluminium strip of suitable size (one on each side)including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting toearthing system etc. as required. (Lighting & general power)

Mtrs. 22 .0004701

b Supplying, installing, connecting to existing Air Insulated Compact Type bus trunking/rising mains, testing and commissioning of 315 amps 25KA SC for 1 sec End Feed Unitfor use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steelsheet enclosure duly powder coated with provision of MCCB/ACB (but withoutMCCB/ACB) complete with necessary joints including clamping brackets, angle ironbracket, steel fasteners, connecting to earthing system etc, as required.

Nos. 1 .0000153

c Providing and fixing 315 Amp, 35 KA FP MCCB in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required.

Nos. 1 .0000577

d Supplying, installing, connecting to existing Air Insulated Compact Type bus trunking/rising mains, testing and commissioning of 125 amps 15KA SC for 1 sec Plug In/ TapOff Box for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with 1.6mm thick steelsheet enclosure duly powder coated with provision of MCCB (but without MCCB)complete etc. as required.

Nos. 7 .000119

e Providing and fixing of 125 Amp, 16 KA FP MCCB in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required.

Nos. 7 .0000931








total amount

f Supplying, installing on wall, testing and commissioning of 315 amps 25KA SC for 1sec Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts,50Hz A.C. supply with enclosure made of 1.6mm thick steel sheet duly powder coatedin convenient sections complete with 4 Nos aluminium bus bars, necessary joints &expansion joints, fire barrier at each floor, provision of tapping at every metre,continuous earthing with 2 Nos aluminium strip of suitable size (one on each side)including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting toearthing system etc. as required. (UPS)

Mtrs. 44 .0009402

g Supplying, installing, connecting to existing Air Insulated Compact Type bus trunking/rising mains, testing and commissioning of 315 amps 25KA SC for 1 sec End Feed Unitfor use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steelsheet enclosure duly powder coated with provision of MCCB/ACB (but withoutMCCB/ACB) complete with necessary joints including clamping brackets, angle ironbracket, steel fasteners, connecting to earthing system etc, as required.

Nos. 2 .0000307

h Providing and fixing 315 Amp, 35 KA FP MCCB in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required.

Nos. 2 .0001154

i Supplying, installing, connecting to existing Air Insulated Compact Type bus trunking/rising mains, testing and commissioning of 200 amps 25KA SC for 1 sec Plug In/ TapOff Box for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with 1.6mm thick steelsheet enclosure duly powder coated with provision of MCCB (but without MCCB)complete etc. as required.

Nos. 14 .0003017

j Providing and fixing of 200 Amp, 25 KA MCCB in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required.

Nos. 14 .0004103

2610.0

TRANSFORMER --








total amount

a Supply, installation, testing and commissioning of 11KV/433V, 800KVA unitisedsubstation consists of 3 phase, Vector DYN-11, 800KVA cast resin dry type energyefficient Transformer (IS:11171 & IS:2026) with on load tap changer & RTCC paneltappimgs from +5% to -15% in steps of 1.25%, changeable by tap links. The HV side isconnected with 11KV, 630A Vaccum circuit breaker through wall through bushing andthe LV side is connected with 1250A 4pole ACB. The incoming terminal of VCB issuitable for HT XLPE cable and out going terminal is suitable with wall throughbushing with bus duct arrangement to connect with transformer HV side.HV Windings- 11 KVLV Windings - 433 VNo load voltage ratio - 11 KV/ 433 VOver load capacity -As per IS 6600Rated Frequency - 50 HzOil by thermometer - 50degreeC (aboveambient temperature)Winding by resistance - 55degreeC (above ambienttemperature)Number of phases - THREEHV Windings - DELTALV Windings -STARWinding - CopperVector Group - Dyn 11Core lamination material - Cold RolledGrain Oriented CoreType of winding insulation - DPC of class A insulationType - OnLoad tap changing (with RTCC)Range - +5% to -15%17 position in steps of1.25%Losses - as per energy efficient requirement.

Set. 1 .0091435

2611.0

DIESEL GENERATOR --

a Erection, testing and commissioning of 1000 KVA DG Set with standard Accessoriescoupled to Stamford Alternator rated , 3 phase, 4 wire, 0.8 PF (lag), 415 V mounted ona channel iron base frame with foot mounting AVM pads, Fuel tank (In Built), Chargedbattery with leads, Silencer, Composite type Acoustic enclosure and Standard ControlPanel. The items including shifting of existing DG from Nandanam Building anderection of AMF panel and complete with necessary control cabling and fixingaccessories etc.

Set. 1 .0017665

b Supply and erection of steel structure fabricated with standard steel channels formounting of 1 No. of 1000KVA DG set and suitable exhaust stack arrangementvertically upto 35m Appx. with necessary hardwares and fixing accessories etc.

Kg 4,650 .0011261








total amount

2612.0

UPS --

a Suppling and installing of 3 Phase, 415 V, 20Kva online UPS at 25 deg C, With staticand manual bypass switch with 15 mins battery back up using, sealed maintenance freebatteries. The items inclusive of Unloading, Lifting, Shifting, Erection, & InstallationCharges and placing the batteries in the battery rack and interlinking the batteries, interconnecting cables and fixing accessories ect.

Set. 1 .0011434

2613.0

SOLAR POWER GENERATION SYSTEM --

a Supply, installation, testing and commissioning of solar power generation system(Appx. 30KW) which including of mono crystaline solar photovoltaic modules, DCcabling system & hardwares, copper cables & conduits, solar charge controller, inverter& battery and all complete with necessary fixing accessories etc.

Set 1 .0104149

b Supplying ,installing testing and Commissioning of Solar Water heating system offollowing rated capacity and region i/c electrical heater back up and make up tank withpiping. Solar water heating system with heat exchanger type-1 for warm region1000LPD

Set 1 .000522

2614.0

HT RING MAIN UNIT - Supply and erection of outdoor type, 11KV, 630 Amps,25KA Extensible Type Ring Main Unit consisting 2Nos. of 11KV Load Break Switchand 1 No. 11KV VCB along with epoxy resin cast CTs and PTs for Tamil NaduElectricity Board tariff applications. The items including necessary safety features andprotections, cabling/control wiring, fixing accessories and all complete as required byTamil Nadu Electricity Board.

Set. 1 .0022418

2615.0

HT & LT CABLING --








total amount

a Supplying of 11KV grade 3 core 120 sqmm PVC insulated and PVC sheathed / XLPEpower cable along with test certificate. The items including supply of necessaryclamping and fixing accessories.

Mtrs. 70 .0002209

b Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KVgrad of Above 120 sq. mm and upto 400 sq. mm size direct in ground includingexcavation, sand cushioning, protective covering and refilling the trench etc as required.

Mtrs. 70 .0000768

c Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KVgrade of Above 120 sq. mm and upto 400 sq. mm size in the existing RCC/ HUME/METAL pipe as required.

Mtrs. 10 .0000024

d supplying and making indoor cable end termination with heat shrinkable jointing kitcomplete with all accessories including lugs suitable for 240 sq. mm size of 3 core,XLPE aluminium conductor cable of 11 KV grade as required :

Nos. 4 .0000951

e Supplying and making outdoor cable end termination with heat shrinkable jointing kitcomplete with all accessories including lugs suitable for 240 sq.mm size of 3 core,XLPE aluminium conductor cable of 11 KV grade as required :

Nos. 1 .0000348

2616.0

Supply of following sizes of 1.1KV grade multicore aluminium conductor, PVCinsulated, GI round/flat armoured, PVC sheathed cables with suitable clampingarrangement and fixing accessories.

--

a 3.5C x 400 sq.mm Al. XLPE cable Mtrs. 250 .0012036

b 3.5C x 300 sq.mm Al. XLPE cable Mtrs. 90 .0003406

c 3.5C x 240 sq.mm Al. XLPE cable Mtrs. 160 .0004939

d 3.5C x 185 sq.mm Al. XLPE cable Mtrs. 315 .000772

e 3.5C x 120 sq.mm AL.XLPE cable Mtrs. 210 .0003484








total amount

f 3.5C x 95 sq.mm Al. XLPE cable Mtrs. 220 .0002925

g 3.5C x 35 sq.mm Al. XLPE cable Mtrs. 100 .0000625

h 4C x 16 sq.mm Al. XLPE cable Mtrs. 185 .0000764

i 4C x 6 sq.mm Al. XLPE cable Mtrs. 250 .0000729

2617.0

Power cable laying --

a Laying and fixing of one number PVC insulated and PVC sheathed / XLPE powercable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) size oncable tray as required.

Mtrs. 535 .0000413

b Laying and fixing of one number PVC insulated and PVC sheathed / XLPE powercable of 1.1 KV grade of Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mmMS flat clamp) size on cable tray as required.

Mtrs. 220 .0000397

c Laying and fixing of one number PVC insulated and PVC sheathed / XLPE powercable of 1.1 KV grade of Above 95 sq. mm and upto 185 sq. mm (clamped with25/40x3mm MS flat clamp) size on cable tray as required.

Mtrs. 525 .0001179

d Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of Above 185 sq. mm and upto 400 sq.mm size direct in ground includingexcavation, sand cushioning, protective covering and refilling the trench etc as required.

Mtrs. 500 .0004564

e Laying of one number additional PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV grade of Above 185 sq. mm and upto 400 sq. mm size direct in ground in thesame trench in one tier horizontal formation including excavation, sand cushioning,protective covering and refilling the trench etc as required.

Mtrs. 135 .0000909








total amount

f Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of Above 185 sq. mm and upto 400 sq. mm size in the existing RCC/ HUME/METAL pipe as required.

Mtrs. 10 .0000024

2618.0

Cable route marker --

a Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at thebottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscriptionduly engraved as required.

Nos. 4 .0000049

b Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. platewith inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cmlong and fixing the same in ground as required.

Nos. 4 .000004

2619.0

Cable glands --

a Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 35 sq. mm (32mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 8 .0000083

b Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 95 sq. mm (45mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 16 .0000284

c Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 120 sq. mm (45mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 12 .0000221

d Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 185 sq. mm (57mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 12 .0000355








total amount

e Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 240 sq. mm (62mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 8 .0000291

f Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 300 sq. mm (70mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 4 .0000163

g Supplying and making end termination with brass compression gland and aluminiumlugs for 3.5 X 400 sq. mm (82mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 16 .0000818

h Supplying and making end termination with brass compression gland and aluminiumlugs for 4 X 16 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required.

Set. 14 .0000131

2620.0

CABLE TRAY --

a Supplying and installing of 450 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painting suspenders etc as required.

Mtrs. 510 .0014678

b Supplying and installing of 600 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painting suspenders etc as required.

Mtrs. 160 .0005594

c Supplying and installing of 450 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,,joined with connectors, suspended from the ceiling with M.S. suspenders includingbolts & nuts, painting suspenders etc as required.

Nos. 40 .000238








total amount

d Supplying and installing of 600 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,,joined with connectors, suspended from the ceiling with M.S. suspenders includingbolts & nuts, painting suspenders etc as required.

Nos. 16 .0001181

e Supplying and installing of 450 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%,joined with connectors, suspended from the ceiling with M.S. suspenders includingbolts & nuts, painting suspenders etc as required.

Nos. 10 .0000693

f Supplying and installing of 600 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%,joined with connectors, suspended from the ceiling with M.S. suspenders includingbolts & nuts, painting suspenders etc as required.

Nos. 6 .0000518

g Supplying and installing of 600 mm width X 50 mm depth X 2.0 mm thicknessperforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%,joined with connectors, suspended from the ceiling with M.S. suspenders includingbolts & nuts, painting suspenders etc as required.

Nos. 12 .0001036

2621.0

EARTHING --

a Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement andwatering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Nos. 10 .0001592

b Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick includingaccessories, and providing masonry enclosure with cover plate having lockingarrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt asrequired.

Nos. 16 .0004881








total amount

c Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as stripearth electrode, including connection/ terminating with nut, bolt, spring, washer etc. asrequired. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &spring washer spaced at 50mm)

Mtrs. 450 .0009854

d Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthingalong with existing surface/recessed conduit/submain wiring/cable as required.

Mtrs. 450 .0001209

e Providing and fixing earth bus of 50mm x 5mm copper strip on surface for connectionsetc. as required.

Mtrs. 12 .0000567

2622.0

LIGHTNING PROTECTION SYSTEM --

a Design, supply, installation and testing of an advanced Lightning Protection system formulti-storeyed buildings, including all accessories and consumables, inclusive of allclamping and any chipping and making good of walls, etc. and PVC / metal conduitingin floor / wall / ceiling / surface above the false ceiling, etc. where required, allcomplete as per specifications, drawings and / or as directed by the Engineer.

--

b Air Terminal, inclusive of mast, adapter & termination lugs and necessary jointing andclamping with supporting accessories.

Nos. 1 .0004204

c 70 sq.mm copper cable with suitable mounting accessories. Mtrs. 60 .000155

d Lighting strike recorder / Event Counter, inclusive of all accessories. Nos. 1 .0000073

e Maintenance-free earth pits made of ground enhancing materials and copper boundedground rods, including laying of high-purity copper tape for interconnecting the pits,treating the earth pit with filling materials, clamps, bolts & nuts and its associatedaccessories as per standard IS, including cost of excavation, backfilling, minor civilworks, and all complete as per specifications, drawings and / or as directed by theEngineer.

Set. 1 .0000701








total amount

f Supply and erection of Aviation light with necessary fixing accessories. Set. 1 .0000322

2623.0

TELEPHONE SYSTEM --

a Supplying and fixing of modular Telephone socket outlet on the existing modular plate& switch box including connections but excluding modular plate etc. as required.

Nos. 755 .0002667

b Supplying and fixing of 1 or 2 Module (75mmX75mm), GI box alongwith modularbase & cover plate for modular switches in recess etc as required.

Nos. 755 .0004863

c Supplying and drawing of 2 Pair, 0.5 sq mm FR PVC insulated annealed copperconductor, unarmored telephone cable in the existing surface/ recessed steel/ PVCconduit as required.

Mtrs. 18,160 .0012698

d Supplying and fixing of 25 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 86 .0000218

e Supplying and fixing of 32 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 150 .0000491

f Supply, installation,testing and commissioning of the push button telephone Nos. 2 .0000049

g Supply and fixing of 20 - pair telephone Krone type junction boxes enclosed in MS boxwith hinged cover with lock & key arrangements, all complete with necessary fixingaccessories.

Nos. 1 .0000018

h Supply and fixing of 50 - pair telephone Krone type junction boxes enclosed in MS boxwith hinged cover with lock & key arrangements, all complete with necessary fixingaccessories.

Nos. 16 .0000439








total amount

i Supplying and drawing of 20 Pair, 0.5 sq mm FR PVC insulated annealed copperconductor, unarmored telephone cable in the existing surface/ recessed steel/ PVCconduit as required.

Mtrs. 25 .0000107

j Supplying and drawing of 50 Pair, 0.5 sq mm FR PVC insulated annealed copperconductor, unarmored telephone cable in the existing surface/ recessed steel/ PVCconduit as required.

Mtrs. 486 .0005247

k Supply , installation , testing and commissioning of the TEC approved ISDN EPABXsystem upto 550 extensions based on Intel Microprocessor type of advanced system asacceptable to the client with suitable battery charger and accessories.

Nos. 1 .0030844

2624.0

DATA NETWORKING --

a Supplying and fixing of 1 or 2 Module (75mmX75mm), GI box along with modularbase & cover plate for modular switches in recess etc as required.

Nos. 755 .0004863

b Supplying and fixing of 25 mm medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessedconduit as required.

Mtrs. 175 .0000444

c Supplying and fixing of modular type data networking (CAT-6) socket outlet on theexisting modular plate & switch box including connections but excluding modular plateetc. as required.

Nos. 755 .0010153

d Supply, laying and termination of high quality CAT-6 Ethernet LAN cable preferablywith FR PVC insulation to be laid in the existing 25mm dia 2mm thick PVC pipe, bothends of cable shall be identified with plastic cable tags.

Mtrs. 18,650 .0034616

e Supply and installation of floor trunking with its necessary fixing accessories, fixed onthe floor surface/table, inclusive of the cost of all fixing accessories and hardwares etc.

--

i) 100mm x 38mm Raceways(two compartment), junction boxes, coupler for joiningraceways , fixing bracket etc.

Mtrs. 2,363 .0165234








total amount

ii) Junction Box of 225 x 225 x 65 - 90mm with flyover. Nos. 225 .0015622

2625.0

CLOSED CIRCUIT TELEVISION SYSTEM --


Mtrs. 1,040 .0002641

b Supply, laying and termination of CAT-6 cable to be laid in the existing 2mm thick25mm dia PVC conduit.

Mtrs. 2,080 .0003861

c Supplying and installing Wall or ceiling mounted indoor type Fixed Dome IP Camerawith 2MP, 20M 720 TVL, IR distance and ICR. The items inclluding necessary fixingaccessories.

Nos. 42 .0004541

d Supplying and installing of 16 Channel Digital Video Recorder with TCP/IPcompatiblity (16Ch, 1CH audio; D1 real time, full channel playback synchronously,VGA, TV output and to support 1HDD upto 4TB & Mini 1U casing). The itemsincluding supply of 2TB hard disk, connectors, pins and providing completeconfiguration etc.

Set. 3 .0002106

e Supplying and installing of Power Supply Unit along with necessary Battery backup,suitable for 3 nos. 16 channel digital video recorder system.

Nos. 1 .0000138

f Supplying and installing of 19 Nos. 1 .0000233

2626.0

PUBLIC ADDRESS SYSTEM --


Mtrs. 875 .0002222








total amount

b Supply, laying and termination of 2 core 1 sqmm speaker cable to be laid in the existing2mm thick 25mm dia PVC conduit.

Mtrs. 2,250 .0002813

c Supplying and installing of 4 Watts, Wall/ceiling mounted type high quality metallicgrill type 100V line speaker with built-in line matching transformer and necessarymounting boxes and fixing accessories.

Nos. 145 .0003532

d Supplying and installing of amplifier rack unit complete with one no. ten zones voicealarm controller with 5000W amplifier. The items including of suitable mixer amplifier/booster amplifier, line matching transformer, power supply unit, connection strip,mounting desk etc.,

Set. 1 .0001531

e Supplying and installing of microphone (call station) for 10 zones unidirectionalcommunication/announcement with emergency button for remote emergencyactivation.

Nos. 1 .0000607

f Supplying and installing of 230V, CD/MP3/DVD Player with necessary power chord. Nos. 1 .0000108

2627.0

BUILDING MANAGEMENT SYSTEM (BMS) --

a Supply, installation, testing and commissioning of building management system withsuitable software/hardware to integrate with all the services like air conditioning,plumbing and other ultra voltage/communication systems.The system complete withnecessary hardware, software and cabling etc.,

No 1 .0064099

2628.0

ACCESS CONTROL SYSTEM --








total amount

a Supply, installation, testing and commissioning of card based premium door controllerwith LCD and key pad RF card based reader with card module. The system shallsupport EM prox, HID prox, Mifare smart and HID iCLASS card module Dot-matrixLCD and touch sense key pad built in interfaces like USB, door lock, door sense, exitreader, exit switch ethernet, RS-485, Aux input and Aux output port. Suitable forAccess control and time attendace etc. cap[acity of upto 50000 event storage withnecessary accessories and power supply through adapter / battrey back up etc.

Set. 12 .000787

2629.0

AUTOMATIC BOOM BARRIER --

a Supply and erection of boom barrier complete with Barrier with beam: 630 barrier with5m boom, opening / closing time - 3 to 4 sec., Transmitter & receiver: 4 channeltransmitter - 433MHz TX4433 LC plug in & Receiver - 433MHz RX RP1 433 LC (1channel), Additional transmitter: 4 channel transmitter - 433MHz TX4433 LC plug in,Pair of Photocell SAFE BEAM and Push button T-15 etc.

Set. 2 .0006688

2630.0

OCCUPANCY SENSOR --

a Supplying, installation, testing and commisioning of microwave technology basedoccupancy sensor having high performance, non regulating programmable type,suitable for connected load upto 10 Amp, for mounting height upto 2.6 mtr and for 5mX 20m coverage area along with necessary fixing arrangements i/c programming at siteetc. complete as required.

Each 91 .0020427

2631.0

TIMER --








total amount

a Supplying, installation, testing and commisioning of Astronomical time switch offollowing configuration to be mounted in feeder pillars / lighting DBs for automaticswitching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, AutoOFF. Auto modes) with manual override facility with 12/24 hour display format withsuitable battery and indication for relay status i/c programming at site complete assrequired.

--

i) 1 Output per phase and suitable for single phase supply Each 5 .0000472

ii) 3 Output (1 Output per phase ) and suitable for single phase supply Each 3 .0000691

2700.0

FIRE PROTECTION SYSTEM --

2701.0

FIRE PUMP ROOM EQUIPMENT - 1- Supplying, Installation, .Testing andCommissioning of electric driven Main Fire Pump (Hydrant) suitable for automaticoperation and consisting of following: complete in all respect as required.aHorizontaltype, centrifugal,End suction back pull out pump of cast iron body & bronze impellerwith stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5kg/sq.cm. at highest and farthest outlet at specified flow of 2280 Ipm at 88m. headconforming to IS:1520.b80HP SQ cage induction motor,TEFC, synchronous speed1500 RPM,suitable for operation on 415 volts, 3phase 50 Hz.AC with IP 55 protectionfor enclosure, horizontal foot mounted type with ClassF 'insulation,conforming to IS-325.c M.S.fabricated Common base plate, coupling, coupling guard, foundation boltsetc. as requiredd Suitable cement concrete foundation duly plastered with anti vibrationpads

--

a SUPPLY set 1 .0011092

b ERECTION set 1 .0000606








total amount

2702.0

Supplying, Installation, .Testing and Commissioning of electric driven Sprinkler FirePump suitable for automatic operation and consisting of following: complete in allrespect as required.aHorizontal type, centrifugal, End suction back pull out pump ofcast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure aminimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of2280 Ipm at 88m. head conforming to IS:1520.b80HP SQ cage induction motor,TEFC,synchronous speed 1500 RPM,suitable for operation on 415 volts, 3phase 50 Hz. ACwith IP 55 protection for enclosure, horizontal foot mounted type with Class-'F'insulation, conforming to IS-325.c M.S.fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as requiredd Suitable cement concrete foundationduly plastered with anti vibration pads

--



2703.0

Supplying, Installation, Testing and Commissioning of diesel engine driven main firepump suitable for automatic operation and consisting of following: complete in allrespect as required.aHorizontal type, centrifugal, End suction back pull out pump ofcast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure aminimum pressure of 3.5 kg/sq.cm.at highest and farthest outlet at specified flow of2280 Ipm at 88m.head conforming to IS:1520.b(b) suitable BHP, 1500 RPM watercooled with radiator, diesel engine conforming to relevant BS & IS standard completewith auto starting mechanism, 12 volts/24 Volts electric starting equipment, DieselTank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm.thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer,instruments and protection as per specification, stop solenoid for auto stop in the eventof fault with audio indications, painted with post office red colour etc.as required.cM.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. asrequireddSuitable cement concrete foundation duly plastered with anti vibration pads

--








total amount



2704.0

Supplying, Installation, .Testing and Commissioning of electric driven Jockey FirePump suitable for automatic operation and consisting of following: complete in allrespect as required.aHorizontal type, centrifugal, End suction back pull out pump ofcast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure aminimum pressure of 3.5kg/sq.cm. at highest and farthest outlet at specified flow of 180Ipm at 88m. head conforming to IS:1520.b15 HP SQ cage induction motor,TEFC,synchronous speed 1500 RPM,suitable for operation on 415 volts, 3phase 50 Hz. ACwith IP 55 protection for enclosure, horizontal foot mounted type with Class-'F'insulation, conforming to IS-325.cM.S.fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as requireddSuitable cement concrete foundationduly plastered with anti vibration pads

--










total amount

2705.0

COMMON PANEL IN FIRE PUMP HOUSEAFabrication, Supplying, Installation,Testing & Commissioning. of .electrical control panel, of cubical construction, floormounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7tank treatment process, cable alley, inter-connection, having switchgears andaccessories mounting and internal wiring, earth terminals, numbering etc. complete inall respect, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosureprotection class IP 42 as required.(i) INCOMER(a) ....Amps. TP&N SFU with HRCfuses(b) Voltmeter (0-500 Volts) with selector switch.(c) Ameter (0- 400Amps.) with selector switch & CT's etc.(d)Set of 3 Phase indicating lamp. (e) Set of AJ.bus bar Amps (ii) OUTGOING.(a)Main fire pump (Hydrant).....Amps, TP&N SFU with HRC fuses with suitable HP fully automatic star/delta starterwith over load protection, current sensing type single phase preventor complete with allaccessories and internal wiring required for automatic operation, selector switch forlocal/remote, auto/manual/OFFoperation.(b) Main fire pump (Sprinkler).....Amps,TP&N SFU with HRC fuses with suitable HP fully automatic star/delta starterwith over load protection, current sensing type single phase preventor complete with allaccessories and internal wiring required for automatic operation, selector switch forlocal/remote, auto/manual/OFFoperation.(c) Jockey pump. (2nos).Amps,TP&N SFUwith HRC fuses with suitable HP fully automatic star/delta starter with over loadprotection, current sensing type single phase preventor complete with all accessoriesand internal wiring required for automatic operation,selector switch forlocal/remote,auto/manual/OFFoperation.

--










total amount

2706.0

(d) Diesel Engine Control.Control for Diesel Engine comprising:-(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays asrequired, push buttons, start/stop in manual mode.(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ONindication.(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V DC'<volt meter, 0-20A DC Ammeter.(iv) AII standard relays and accessories for automatic operation of diesel engine.

--



2707.0

INDICATION PANEL IN FIRE CONTROL ROOM(i) Fabrication, Supply,Installation,Testing & commissioning of wall mounted remote indication panel for firefighting system fabricated from not less than 1.6 mm. thick CRCA sheet, powdercoated of approved shade, complete internal wiring, indicating lamps, relays,accessories, numbering, lettering complete in all respect andconsisting of .the followingas required.(a) ON/OFF indication of Main Electrical Fire Pump, Pressurisation Pump.(b). AudioA/isual indication of operation of Main Electric/Diesel Fire Pump andTerrace Pump with reset push button.(c) Pressure indication in Fire Fighting System (pressure transducer)(ii) Supplying,installation, testing and commissioning of annunciation panel made out of not less 1.6mm thick CRCA sheet powder coated in approved colour with locking

--










total amount

2708.0

Supplying and making end termination with brass compression gland & Al.lugs forfollowing sizes of PVC insulated, PVC sheathed/ XLPE Al.conductor cables of 1.1 KVgrade as required. (a) 2R x 3.5 core x 95 sqmm Aluminium conductor cable forElectrical motor Driven pump.

--

a SUPPLY Rmt 40 .0000636

b ERECTION Rmt 40 .0000164

2709.0

b) 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Rmt 30 .0000282

2710.0

c) 12 core x1.5 sqmm for Diesel Engine pump --

a SUPPLY Rmt 25 .0000258

b ERECTION Rmt 25 .0000102

2711.0

d) 2 core x 1.5 sqmm for pressure switch Rmt 50 .0000068

2712.0

e) 4 core x 2.5 sq mm for MCC to ESP interlocking. Rmt 30 .0000107

2713.0

G.I. earth plate electrode: Earthing with G.I. earth plate 600mmX600mmX6mm thickincluding accessories, and providing masonary enclosure with cover plate havinglocking arrangement and watering pipe etc. (but with charcoal or coke and salt) asrequired.

set 1 .0000159

2714.0

Providing and fixing 25 mm x 5 mm Gl Strip in 40 mm dia G.I.pipe from earthelectrode as required.

Rmt 25 .0000323








total amount

2715.0

Providing and Fixing 4 mm.dia copper wire on surface or in recess for loop earthing asrequired.

Rmt 25 .0000067

2716.0

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthingcomplete as required.

Rmt 25 .0000034

2717.0

Fabrication and Installation of following sizes of perforated MS cable trays includinghorizontal and vertical bends, reducers, tees, cross-members and other accessories asrequired duly suspended from the ceiling with MS Suspenders and including paintingwith powder coating etc as required

--

a (a) 100 mm,(W)x50 mm.(D)x1.6 mm(T) Rmt 30 .0000384

b (b) 150 mm.(W)x50 mm.<D)x1.6 mm(T) Rmt 30 .0000434

c (c) 300 mm.(W)x50 mm.(D)x1:6 mm(T) Rmt 40 .0000774

2718.0

Supplying, laying, testing & commissioning of 'B' class medium duty G.I Pipeconforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers,nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps andpainting with two or more coats of synthetic enamel paint of required shade complete asrequired.

--

a 250mm nominal dia --

i) SUPPLY Rmt 30 .0003273

ii) ERECTION Rmt 30 .0000909

b 200mm nominal dia --









total amount


c 150mm nominal dia --



d 100mm nominal dia --



e 80mm nominal dia --



f 50mm nominal dia --



g 25mm nominal dia --










total amount

2719.0

Supplying, installation testing and commissioning of dual plate Non-return valve offollowing sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc. as required.

--

a 200 mm nominal dia --

i) SUPPLY Nos. 1 .0000705

ii) ERECTION Nos. 1 .0000061




c 80 mm nominal dia --



2720.0

Supplying and fixing, testing & commissioning of double flanged sluice valve of ratingPN 1.6 with Non rising spindle, gun mental seat, ISI marked complete with nuts, bolts,washers, gaskets, conforming to IS 14846 of following sizes as required

--




b 200mm nominal dia --142 SIGNATURE OF BIDDER WITH SEAL







total amount












2721.0

Supplying and fixing, testing & commissioning of Butterfly Valve of rating PN:1.6with gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets,conforming to IS 13095 of following sizes as required.

--




b 50mm nominal dia --143 SIGNATURE OF BIDDER WITH SEAL







total amount



2722.0

Supplying, installation, testing and commissioning of Stainless steel strainer fabricatedout of 1.6 mm. thick stainless steel sheet with 3 mm.dia holes with stainless steel flange

--

a 200mm nominal dia. --






2723.0

Supplying & fixing pressure switch in the M.S Pipe line including connection etc. asrequired

--



2724.0

Supply and installation of Pressure gauges /Pressure switch of suitable range forpumpset, siphon, Fittings like unions / colors / reducers etc.

--


ii) ERECTION Nos. 5 .0000039144 SIGNATURE OF BIDDER WITH SEAL







total amount

2725.0

Supplying, installing, testing and commissioning of Gun metal chrome finished Ballvalves with fittings of screwed end type.

--

a 25 mm nominal dia Nos. 5 .0000061

-- HYDRANT SYSTEM --

2726.0

Supplying, laying, testing & commissioning of 'C' class heavy duty MS pipeconforming to IS 3589 and 1239, ERW, above ground including fittings like elbows,tees, flanges, tapers, nutsbolts, gaskets etc., fixing the pipe on the wall/ceiling withsuitable clamps and painting with two or more coats of synthetic enamel paint ofrequired shade complete as required.

--

a 150mm nominal dia (External) --

i) SUPPLY Rmt 210 .0013364


b 150mm nominal dia (Internal) --

i) SUPPLY Rmt 156 .0009927


c 100mm nominal dia (Terrace) --











total amount






2727.0

Supply, Installing, testing and commissioning of Heavy class M.S pipe ERW (as per IS-1239 Part-1) laid in under ground (1 Mtrs below ground level). The quoted rate shallincludes necessary specials like long radius bends, tees, including cutting, welding /flanged joints with necessary washers, nuts, bolts, etc. also include for providingconcrete anchor blocks at all change in direction of pipeline if necessary and also neareach joints..

--




2728.0

Supplying and fixing, testing & commissioning of Butterfly Valve of rating PN:1.6with bronze/gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets,conforming to IS 13095 of following sizes as required.

--

a 150mm nominal dia (External & Riser) --










total amount

b 150mm nominal dia ( 4 way FBI) --



c 100mm nominal dia (Terrace) --



2729.0

Supplying, installation testing and commissioning of dual plate Non-return valve offollowing sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc. as required.

--

a 150mm nominal dia ( 4 way FBI) --



b 100 mm nominal dia (Terrace) --



2730.0

Supplying, installation, testing and commissioning of Stainless steel strainer fabricatedout of 1.6 mm. thick stainless steel sheet with 3 mm.dia holes with stainless steel flange

--

a 100mm nominal dia (Terrace) --








total amount



2731.0

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290(Type -A) with blank Gunmetal cap and chain as required.

--

i) SUPPLY Nos. 18 .0003818


2732.0

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm diainstantaneous FM Gun metal coupling and cast iron wheel, ISI marked, conforming toIS 5290 (type A) with blank Gunmetal cap and chain as required.

--



2733.0

Supplying and fixing 63 mm dia, 15 mtr. long RRL hose pipe with 63 mm 4ka Maleand-Female Gun metal couplings duty binded with Gl wire, rivets etc. conforming to IS636 (type-A) as required.

--

i) SUPPLY Nos. 46 .0005297


2734.0

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internaldiameter) size Gun Metal nozzle conforming to IS .903, suitable for instantaneousconnection to inter connect hose pipe coupling as required.

--

i) SUPPLY Nos. 23 .0002405








total amount


2735.0

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in Postoffice Red, conforming to IS 884 with upto date amendments, complete with thefollowing as required.a30 m. long 20 mm {nominal internal) dia water hoseThermoplastic (Textile reinforced) Type -2 as per IS:12585b20 mm (nominal internal)dia gun metal globe valve & nozzlecDrum and brackets for fixing the equipmets onwalldConnections from riser with 25 mm dia stop valve (gun metal) & M.S. Pipe

--

i) SUPPLY set 18 .0004255

ii) ERECTION set 18 .0000655

2736.0

Fire duct Shutter fabricated out of M.S. sheet and frame, door shall be 900mm x 1200mm min. & fixed with 4 mm thick Glass, suitable Rubber beeding and Lockingarrangement. Quoted rate shall be includes all fasteners etc, and complete shutter shallbe powder coated of approved colour both inside and out side.

--

i) SUPPLY Nos. 18 .0004373


2737.0

Supplying and fixing 4way fire brigade connection of cast iron body with 4Nos. Gunmetal male instantaneous inlet couplings complete with cap and chain as reqd. for150mm dia MS pipe connection, conforming to IS 904 as required.

--










total amount

2738.0

Supplying and fixing of hose cabinet of size 900 mm x 600 mm x 500 mm made of 2mm thick MS sheet with 6 mm thick glazed glass -doors i/c necessary lockingarrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos. 15mtr. long Hose pipe,1N'o. branch pipe, mounted on wall OR raised brick platform &duly painted with Post office red externally and white internally with synthetic enamelpaint complete in all respect, for external hydrant, as required.

--



2739.0

Supplying and fixing approved make 25mm dia. With automatic air release valve withunions etc. complete.

--



2740.0

Supplying, installing, testing and commissioning of Gun metal chrome finished Ballvalves with fittings of screwed end type.

--

a 25mm nominal dia Nos. 2 .0000024

2741.0

Supplying, installing, testing and commissioning of Wrapping & Coating for Underground M.S. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tarcomponent supported on fabric of organic (or) inorganic fibre and minimum 4mm thickand shall conform to requirement of IS:10221 code of practice for coating and wrappingof under ground pipes line.

--

i) SUPPLY Sq.m 30 .0000366

ii) ERECTION Sq.m 30 .0000141








total amount

-- AUTOMATIC SPRINKLER SYSTEM --

2742.0

Supplying, laying, testing & commissioning of 'C' class heavy duty MS pipeconforming to IS 3589 and 1239, ERW, above ground including fittings like elbows,tees, flanges, tapers, nutsbolts, gaskets etc., fixing the pipe on the wall/ceiling withsuitable clamps and painting with two or more coats of synthetic enamel paint ofrequired shade complete as required.

--

a 150mm nominal dia (Riser & Ring main) --







i) SUPPLY Rmt 318 .0017346



i) SUPPLY Rmt 108 .0004091









total amount


i) SUPPLY Rmt 114 .0003109


f 50mm nominal dia --

i) SUPPLY Rmt 120 .0002545


g 40mm nominal dia --



h 32mm nominal dia --

i) SUPPLY Rmt 420 .0005091


I 25mm nominal dia --

i) SUPPLY Rmt 1,812 .0017159

ii) ERECTION Rmt 1,812 .0005491

2743.0

Supplying and fixing, testing & commissioning of Butterfly Valve of rating PN:1.6with bronze/gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets,conforming to IS 13095 of following sizes as required.

--








total amount


i) SUPPLY Nos 4 .0000693

ii) ERECTION Nos 4 .0000121





i) SUPPLY No 1 .0000109

ii) ERECTION No 1 .0000018

2744.0

Supplying, installing, testing and commissioning of Motorised Butterfly valve withrequired flanges, nuts, bolts etc. complete with all accessories.

--


i) SUPPLY No 1 .0001819

ii) ERECTION No 1 .0000076

2745.0

Supplying fixing testing & commissioning of 15 mm size quartzoid bulb typesprinklers, of rating 68 degree C. pendent with required accessories.

--

a Pendent sprinkler --








total amount

i) SUPPLY Nos 787 .0008407


2746.0

Supplying, installing, testing and commissioning of water curtain nozzle (open type) . --

a Water curtain spray nozzle - ( K23 ) --



2747.0

Supplying& fixing testing & commissioning of installation control valve of Cast ironbody and bronze working parts comprising of water motor alarm, bronze seat clapper,and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarmwhen the-Wet riser/ Sprinkler system activates, pressure gauges, emergency releases,strainer, pressure switch, cock valve complete with drain valve and bypass, test controlbox, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of size 150mm dia as required.

--

a 150mm dia. --



2748.0

Supplying, installing, testing and commissioning of Motor starter panel for motorisedbutterfly valve complete with all accessories.

--









total amount


2749.0

Supplying, installing, testing and commissioning flow switch on sprinkler distributionheader on each floor and shall be connected to fire alarm panel through cable. Cableshall be measured seperately.

--







2750.0

Stainless steel corrugated flexible pipe(hose) for dropping sprinklers below falseceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union /reducer collar, clamps etc. as required.

--

i) SUPPLY Nos 531 .0022528


2751.0

Supply & fixing of approved type rosette plates ( Surface mounted type, in two piece)for Sprinklers below false ceiling area.

--

a The Rosette shall be fabricated by M.S. plate of 2mm thick and the finish shall bepowder coated and color shall be as approved by architects / clients.

--

i) SUPPLY Nos 531 .0001307








total amount


2752.0

Supplying and fixing approved make 25mm dia. With automatic air release valve withunions etc. complete.

--



2753.0

Supplying, installing, testing and commissioning Drain Valve for Drain connection. --

i) 25mm dia. Nos 1 .0000012

ii) 50mm dia. -Vertical Nos 9 .0000358

-- ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM --

2754.0

Supply, installing, testing and commissioning of analogue addressable Fire AlarmControl panel with 48 hrs battery back up . The Panel Shall be Six loop capacity. Thecontrol panel, battery charger etc, The panel shall consisting with 80 character LCDdisplay and RS 485 for networking

--



2755.0

Addressable optical (photo electric) Smoke detector with base, Junction box and otheraccessories as required (Above False Ceiling)

--

i) SUPPLY Nos 240 .0023291








total amount


2756.0

Addressable optical (photo electric) Smoke detector with base (Below False Ceiling) --

i) SUPPLY Nos 270 .0026203


2757.0

Addressable rate of rise Heat detector with base, Junction box and other accessories asrequired.

--



2758.0

Response indicator for all detectors located above false ceiling --

i) SUPPLY Nos 240 .0000509


2759.0

Analogue Addressable Fault isolator module capable of monitoring shorted loop circuitand automatically restore communications when shorted conditions are corrected

--



2760.0

Supply, installing, testing and commissiong of Analogue Addressable control Modulein lift machine room.

--








total amount



2761.0

Supplying, installing, testing and commissioning of Analogue Addressable single inputmonitor Module for integrating Sprinkler flow switch with fire alarm system.

--



2762.0

Analogue Addressable Input/Output Module or control module for AHU tripping andshut down in the event of fire/ smoke occurs in conditioned space.

--

i) SUPPLY Nos. 18 .0002457


2763.0

Supplying, installing, testing and commissioning of Analogue Addressable ElectronicHooter

--

i) SUPPLY Nos. 33 .0005254


2764.0

Supplying, installing, testing and commissioning of Addressable Manual Call Point --

i) SUPPLY Nos. 25 .0003083









total amount

2765.0

Supplying, installing, testing and commissioning of 2 core of 1.5 sq. mm, Annealed tincopper conductor, PVC Sheathed armoured FRLS MICC Cable.

--

i) SUPPLY Rmt 6,000 .0083183

ii) ERECTION Rmt 6,000 .0009091

-- FIRE EXTINGUISHERS --

2766.0

Supplying, installing and commissioning Portable Fire extinguishers of following type& capacity.

--

a Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand newseamless cylinder with control discharge mechanism fittied with bend and horn etc.complete, confirming to IS: 15683.

--



b Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brandnew seamless cylinder with control discharge mechanism fittied with bend and horn etc.complete, confirming to IS: 15683.

--

i) SUPPLY Nos. 14 .0003182


c Mechanical Foam type fire extinguisher 9Lts. Capacity, stored pressure typecontrollable discharge mechanism.

--









total amount


d ABC powder type fire extinguisher of 6 Kgs. Capacity,Mono Ammonium PhospatePowder 90, Stored pressure type, Pressure Gauge, Controllable discharge mechanismwith Hose & Nozzle etc. Complete. Confirming to IS:15683

--

i) SUPPLY Nos. 71 .0009682


e Fire buckets round bottom type enamel painted, white inside & Red out side and Letter --

i) SUPPLY Nos. 44 .0000603


f Fire bucket stand fabricated by MS angles to install 4 Nos. of buckets. --

i) SUPPLY Nos. 11 .0000668


-- SIGNAGES --

2767.0

Providing and installing in position the following tupe of sign boards made out of 3mmthick Opaque PVC foam board with computer cut. PVC non-reflective self adhesivevinyle painted foam board, complete with mirror fasteners.

--

a Signages with printed IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTEDOTHERWISE of 1.5cm height letters in red with white back ground. The size of theboard shall be 25cm x 30cm and shall be fixed at the height of 2mts, from finished floornear Manual Call Points.

--








total amount

i) SUPPLY Nos. 18 .0000329


2768.0

Floor indentification signage (i.e, GROUND FLOOR ETC.,) at each stair enclosure onevery floor, indicating the floor number in words, lettering size shall be 7.5cm withcontrasting colour from back ground. Size shall be 15cm x 60cm.

--

i) SUPPLY Nos. 18 .0000394


2769.0

Providing and fixing in position the signage of Incase of fire do not use Lift Size 8inchx 8inch

--

i) SUPPLY Nos. 18 .0000329


2770.0

Providing and fixing in position the signage of Fire Extinguisher to be pastedimmediately above the every extinguisher. Size 4inch x 4inch

--

i) SUPPLY Nos. 96 .0000731


2771.0

Providing and fixing in position the signage of Fire Hydrant & Hose Reel to be pastedon door of the every fire shaft at all floors. Size 6inch x 8inch

--

i) SUPPLY Nos. 18 .0000165









total amount

2772.0

Providing and fixing in position the sign board of ASSEMBLY POINT complete with1 mm thick rigid plastic board size of 400 mm x 300 mm to be fixed on ground byusing a steel rod / pipe at designated places as per drawing.

--



2773.0

Providing and fixing in position the signage of Fire alarm Panel Size 6inch x 8inch --



2774.0

Providing and fixing in position the signages FIRE ORDER it should contain thefollowing matter on 3mm thick Opaque PVC foam board of computerised cut, PVCnon-reflective self adhesive vinyle painted foam board of 3feet x 4feet

--

a Type -I comprising the followingA) ALERT THE SECURITY AT SECURITY ROOMBY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGICLOCATIONS.AUTO GLOB) EVACUATE THE OCCUPANTS BY USING FIREEXITS AND EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUSASSEMBLY POITS.AUTO GLOC) IF POSSIBLE TRY TO EXTINGUISH THEFIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER ORWATER FROM NEAREST WET RISER. D) BE CALM AND DO NOT GIVE ANYROOM FROM PANIC, WALK, DO NOT RUN. E) IF YOU ENCOUNTER SERIOUSDIFFICULTY IN EVACUTION, FLAT AND TRY TO ATTRACT ATTENTION OFRESCUE TEAM.

--


ii) ERECTION Nos. 1 .0000014162 SIGNATURE OF BIDDER WITH SEAL







total amount

b Type - II comprising the following-ACTION BY SECURITY/RECEPTION UPONRECEIPT OF INFORMATION THROUGH FIRE ALARM ORFIRE DETECTORSOR BY USING PUBLIC ADDRESS SYSTEM.A) ALERT THE Security /OCCUPANTS / Staff BY USING PUBLIC ADDRESS SYSTEM.B) INFORM FIRECONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS:101, C) REFER EVACUATION PLAN FROM EVACUATING STANDARDPEOPLE.D) GUIDE THE FIRE FORCE, ON THEIR ARRIVAL TO THE SEAT OFFIRE NE) IN CASE OF THE CASUALITIES, CALL AMBULANCE BY DIALLINGNUMBER.

--



-- TOTAL FOR PART - F --

2775.0

FIRE SUPRESSION SYSTEM --








total amount

a Tank & Valve Assembly, 45 Kg, Empty ,4Nos.Novec Agent (in Kg)154Nos.Tank Bracket Assembly8NosFlexible discharge Hose4Nos.Electric Actuator Shipping assembly4Nos.Local Manual Actuator4Nos.Nozzle, Brass, Drilled,6Nos.Warning Plate (For use OutsideRoom)1Nos.Warning Plate (For use InsideRoom)1Nos.Flexible Actuation Hose4Nos.Actuation Elbow4Nos.Actuation Adaptor4Nos.Pnuematic Actuator4Nos.Piping SCH - 801LotElectronic Hooter1Nos.Abort Switch1Nos.

lot 1 .0046392








total amountManual Release Switch2Nos. 2 Zone Gas Release Panel1Nos. 2c x 1.5 Sq.mm Armoured Cable110Nos.Smoke detector12Nos.Response Indicator8Nos.








total amount

b Tank & Valve Assembly, 45 Kg, Empty ,2Nos.Novec Agent (in Kg)78Nos.Tank Bracket Assembly4NosFlexible discharge Hose2Nos.Electric Actuator Shipping assembly2Nos.Local Manual Actuator2Nos.Nozzle, Brass, Drilled,6Nos.Warning Plate (For use OutsideRoom)1Nos.Warning Plate (For use InsideRoom)1Nos.Flexible Actuation Hose2Nos.Actuation Elbow2Nos.Actuation Adaptor2Nos.Pnuematic Actuator1Nos.Piping SCH - 801LotElectronic Hooter1Nos.Abort Switch1Nos.

lot 1 .0024988








total amountManual Release Switch2Nos. 2 Zone Gas Release Panel1Nos. 2c x 1.5 Sq.mm Armoured Cable60Nos.Smoke detector12Nos.Response Indicator8Nos.

2800.0

AIR-CONDITIONING WORKS --

2801.0

Supply, Installation, Testing and commissioning (SITC) of variable refrigerant flow(VRF) unit. The unit shall be complete with the following : Hermatic rotary / scrollcompressors, with ALL variable speed Inverter compressor fitted in VRF Outdoor unit.-Air cooled condenser coil with fan, motor and starter-Inter connecting refrigerantpiping and valves.-Controls comprising HP / LP cut out, cooling thermostats etc.-Starter for the compressor motors.-Interconnecting copper piping, power wiring, controlwiring and earthing.-Base frame with anti vibration mounts.-Micro processor based unitmounted starter / control panel with suitable rain protection covers.-The units, completewith evaporator coil, fan with motor, drain pan with pump, air filters, electronicexpansion valve etc.,-First charge of Gas and Oil for all the VRF units.The unit shall beof Toshiba / Daikin / Trane /Blue Star/ Stulz india ltd./ Hitachi make with R 407 or R410.

--

-- Outdoor units --

a - 48 HP high COP VRV outdoor unit --

i) supply sets 6 .0143548

ii) Erection sets 6 .0010909

b - 24 HP high COP VRV outdoor unit --167 SIGNATURE OF BIDDER WITH SEAL







total amount



2802.0

SITC of Indoor units, complete with evaporator coil, fan with motor, drain pan withpump, air filters, electronic expansion valve, y joints etc., Make same as in 1 above.

--

a 2 TR, 4 way air discharge cassette unit --



b 2 way air discharge cassette units:1 TR capacity --



c 1.5 TR capacity --



2803.0

High static ceiling suspended ductible units: --

a 8 TR capacity --

I supply sets 12 .0018364








total amount


2804.0

Treated fresh air units:650 CFM, 5 TR capacity ceiling suspended, concealed highstatic ductible

--



2805.0

Supply and laying of 18/19G copper refrigeration piping with all fittings should be longbend (no elbow) with proper insulations, refnut connections, supports, nylon tapewrapping etc

--

b 38.1 mm copper pipe --

i) supply M 220 .0014584

ii) Erection M 220 .000025

c 31.75 mm copper pipe --

i) supply M 148 .0008409


d 28.58 mm copper pipe --

i) supply M 136 .0005873


f 22.22 mm copper pipe --








total amount

i) supply M 160 .0004727


h 15.88 mm copper piping --

i) supply M 160 .0003212


I 12.7 mm copper piping --

i) supply M 148 .0002691


j 9.52 mm copper piping --

i) supply M 240 .0003364


k 6.35 mm copper piping --

i) supply M 240 .0002273


2806.0

Cordless remote for the indoor units --

i) supply nos 118 .0004894








total amount

2807.0

Supply and laying of communication cable of PVC armoured copper from power socket(near indoor unit), minimum size 2 x 1.5 sqmm or as required

--

i) Supply M 1,550 .000822

ii) Erection M 1,550 .0001468

2808.0

PVC-drainpiping-withsupports-of4Kg/sqcm-rating --

a 25 mm dia --

i) Supply M 120 .0000432


-- 15 mm dia --

i) Supply M 200 .0000606


2809.0

Underdeck insulation of 32 mm nitrile rubber material. --

i) Supply SQM 10 .0000246

ii) Erection SQM 10 .0000019

2810.0

For Fresh air: Supply and laying of galvanized sheet steel ducting with class VIIIquality of zinc coating, complete with anchor fasteners and MS supports, angle bracingsas required, nut, bolt & gasket etc.

--








total amount

a 24 G ducting --

i) Supply SQM 1,200 .0039319

ii) Erection SQM 1,200 .0014546

b 22 G ducting --

i) Supply SQM 200 .0007197


2811.0

Supply and installation of powder coated Al. Supply air grills and return air outlets: --

a SAG with damper --



b - RAG without damper --



c Supply and laying of thermal insulation of ducting with 12 mm thick nitrile rubber,laminated with Aluminium foil

--

i) Supply SQM 300 .0005114

ii) Erection SQM 300 .0001705172 SIGNATURE OF BIDDER WITH SEAL







total amount

d Supplying and installation of acoustic insulation of ducting with 12 mm thickarmasound or equivalent material rigid board, covered with tissue paper and finishedwith perforated Aluminium sheet of 26 G

--



e Supply and laying of fusible link type fire damper --



2812.0

CO 2 Sensors with wiring and all accessories --

i) Supply sets 7 .0000822


2813.0

Toilet exhaust system: --

-- Supply and fixing of online axial type toilet exhaust fan of noise level not more than 50dB and of capacity 600 CFM with all necessary supports & accessories and preferablematerial of construction as plastic.

--

i) Supply set 1 .0001326

ii) Erection set 1 .0000095








total amount

2814.0

For Fresh air: Supply and laying of galvanized sheet steel ducting with class VIIIquality of zinc coating, complete with anchor fasteners and MS supports, angle bracingsas required, nut, bolt & gasket etc.

--

a 24 G ducting --



-- Supply and installation of powder coated Al. Exhaust air grills and return air outlets: --

b EA grille with damper --



c Basement Ventilation - SITC of 10000 CFM fan, 30 mm SP centrifugal forward curvedfan

--



d SITC of jet air fans of 6000 CFM capacity complete with electrical wiring and allsupport and accessories

--










total amount

2815.0

Supply, Installation, Testing and commissioning (SITC) of packaged air conditioningprecision units of 7 TR capacity (1 Working + 1 Standby), with 2 numbers hermaticrotary scroll compressors. The unit shall be complete with the following:-HermaticScroll compressors with starter.-air cooled condenser with fan and motor/starter.-Evaporator coil with fan, motor and starter.-Interconnecting refrigerant piping andvalves.-Controls comprising HP/ LP/ OP cutouts, relays, thermostatic expansion valves,single phasing preventers etc.-Starter for the compressor motors and all safety relays.-Interconnecting copper piping, power wiring, control wiring and earthing.-Microprocessor based unit mounted control panel.- Built in Humidity Control package ( bothhumidification and humidification) - Built in precision temperature controllers.MAKE:EMERSON/ BLUE STAR/STULZ INDIA LTD./ HITACHI

--



2816.0

Providing structural supports for the 2 x 7 TR outdoor units. sets 2 .0000189

2817.0

Providing copper piping complete with bends, elbows, supports, insulation for suctionline etc., between the precision packaged unit and outdoor units

--

a 11/8inch Copper piping with insulation M 90 .0003921

b 5/8inch copper piping M 90 .0002472

2818.0

Furnishing full charge of refrigerant gas and oil for the Precision AC. lot 1 .0001326

2819.0

Supply and Erection of SS supply air grills of size 600 x 600 with volume controldampers, mounted on the false flooring of the data centre

nos 8 .0000742








total amount

2820.0

Testing and commissioning of entire units as under:Pressure Testing of Copperpiping.Vacuum Testing:Gas charging:Commissioning and setting of allcontrols.Performance testing of all the units.

lot 1 .0000379

TOTAL Weightage 0.9999993


tender specification bhel: pssr: sct: 1814 · technique by tripod and mechanical winch machine all...

Documents