Government of Goa STATE DIRECTORATE OF CRAFTSMEN TRAINING

Shramashakti Bhavan, 3rd Floor, Patto Plaza, Panaji-Goa.403001 Ph: (0832)2437059/60 Fax: 2437060

Website: www.sdct.goa.gov.in Email: dir-sdct.goa@nic.in Tender No: SDCT/PUR/e-Tender/2016-17/001 Date: 20th May, 2016

Tender Form & Specification of the Tender Item

TENDER NO. : - SDCT/PUR/e-Tender/2016-17/001 NAME OF THE WORK - Procurement of Automobile Tools for ITI Sattari, ITI Cacora & ITI Canacona ESTIMATED COST- 62,55,505.00 EMD - 1,56,388.00 TENDER SHALL REMAIN VALID TILL - November 2016 DELIVERY PERIOD - 60 days from the date of issue of Supply Order IMPORTANT : 1) Prescribed Tender Form should be submitted to the State Directorate of Craftsmen Training, Shram Shakti Bhavan, 3rd Floor, Patto Panaji – Goa digitally signed by the tenderer, otherwise offer will be rejected. 2) Detailed Technical specifications are given below:-

Sl. No. Description/Specification of Items Unit Qty.

Refer Annexure –I (Signature of Tenderer)

2

TENDER SCHEDULE & IMPORTANT DATES

Please Note: All bid related activities (Process) like Tender Document Download, Bid Preparation, bid submission and submission of other documents will be governed by the time schedule given under Key Dates below:

Activity Time Schedule

Online request for Tender document 10.06.2016 upto 13.00 Hrs Online submission of Tender Document

13.06.2016 upto 15.00 Hrs

Online opening of bid 14.06.2016 at 11.00 Hrs Pre-bid meeting 07.06.2016 at 11.00 Hrs

3

INSTRUCTIONS TO BIDDERS

1. GENERAL INSTRUCTIONS:-

1.1 To view- Tender Notice, Detailed Time Schedule, Tender Document for this Tender and subsequently purchase the Tender Document and its supporting documents, kindly visit following e-Tendering website of Government of Goa: www.tenderwizard.com/GOA

1.2 If any assistance is required regarding e-Tendering (registration / upload / download) please contact Govt. of Goa e-Tendering Help Desk on numbers: Mr. Nihal - 771908006, Rajesh - 8554878738, Kiran - 8600651553.

1.3 Bidders to quote for items of leading brand with IS certification, wherever applicable.

2 PURCHASE AND DOWNLOADING OF TENDER FORM:- 2.1 The tender document is uploaded / released on Government of Goa, e-tendering website

www.tenderwizard.com/GOA. Tender document and supporting documents have to be purchased on-line and downloaded from following link of State Directorate of Craftsmen Training on e-Tendering website of Government of Goa, www.tenderwizard.com/GOA by making online payments for Tender document and tender processing fee. Mode of Payment towards Cost of the Tender Document, EMD & Tender Processing Fee: To be paid online through e-payment mode via NEFT/RTGS/OTC/debit card/credit card facility/net banking with pre-printed challans available on e-tendering website and directly credit the amount to ITG account as generated by challans for NEFT/RTGS/OTC.

2.2 Tender forms will not be sold / issued manually from State Directorate of Craftsmen Training, Shram Shakti Bhavan, 3rd Floor, Patto Panaji – Goa.

2.3 Only those Tender offers shall be accepted for evaluation for which non-refundable

Tender document Fee, Tender processing fee and EMD ( refundable) as mentioned in the tender document is received online on or before scheduled date given in TIME SCHEDULE AND IMPORTANT DATES of the tender.

3. SUBMISSION OF BIDS

3.1 Bid shall have to be submitted online only under “Single Envelope System” ( i.e Techno- Commercial Bid). Bids not submitted online will not be entertained.

3.2 Bidder shall quote for all items as evaluation shall be done for all items together as a single package for award of contract.

3.3 Offer should be inclusive of all taxes, F.O.R. Destination (excise duty, sales tax, packing & forwarding, freight upto destination, loading unloading, insurance charges & other charges, if any).

3.4 Online Bid envelope shall contain following documents (in the form of PDF files / Scanned images), alongwith prices in separate excel sheet provided. These documents need to be digitally signed by individual tenderer’s digital signature and uploaded during online bid preparation stage.

4

1) Sales Tax / VAT Clearance Certificate either from State or from Central Govt. (Wherever applicable) having Tax paid upto March 2016 and proof of Tax paid thereafter. 2) If Sales Tax / VAT Clearance Certificate is not possible to submit alongwith tender, the proof of application made for getting Sales Tax / VAT Clearance Certificate having acknowledgement of Sales Tax Department should be submitted alongwith tender form and Sales Tax / VAT Clearance Certificate should be submitted. Otherwise tender will be rejected. 3) No Deviation Certificate in detail in the prescribed proforma should be submitted for each item separately, wherever there is no deviation. 4) The Bidder should furnish document to support that he has the financial capacity to perform the contract. For this the bidder should have the minimum turnover of twice the estimated amount of this e-Tender in any one of the last three Financial years (i.e FY2013-14 , FY 2014-15 or FY 2015-16). 5) Manufacturer’s Catalogue / Leaflet / Circuit-diagram / Layout-diagram for each equipment should be attached with the offer, wherever applicable. 6) Valid registration Certificate of the company / firm. 7) PAN CARD copy. 8) Partnership deed in case of partnership firm 9) Undertaking for service after sales and warranty for minimum 1 year should be

given alongwith tender. 10) Undertaking of delivery period within 60 days is to be submitted. 11) Undertaking for delivery at various institutes/Centres, including demonstration,

installation, satisfactory trial at free of cost and service during warranty period. 12) Undertaking duly signed by the tenderer regarding acceptance of penalty clause,

risk purchase clause and fall clause.

3.5 In case, during the scrutiny of the bids of any bidder, if it is revealed that the documents submitted by the bidder is/ are unauthentic, then such bid/s shall be summarily rejected and further course of action on the said bidder/s shall be initiated as per rules, including forfeiture of the EMD.

3.6 The bidders shall submit physical copies of above documents in sealed envelopes duly super scribing on them the e-Tender No and name of work, duly self attested, before opening of bids.

Note: If, during online bid preparation, any need arises to upload additional documents, apart from the above mentioned documents, an option to upload additional documents has been provided in the e-Tendering software which will be available to bidders during online bid preparation stage.

5

4. OPENING OF BID

The bid will be opened online through e-Tendering procedure, to verify its contents as per requirements, on the date specified in Tender Notice in presence of tenderer/s or their authorized Representative. Authorized Representative to carry an Authorization Letter from the bidder.

5 EARNEST MONEY DEPOSIT (EMD):

The tenderer shall have to furnish Earnest Money Deposit (E.M.D.) payable through online payment Gateway on portal www.etender.goa.gov.in / www.tenderwizard.com/GOA To be paid online through e-payment mode via NEFT/RTGS/OTC/debit card/credit card facility/net banking with pre-printed challans available on e-tendering website and directly credit the amount to ITG account as generated by challans for NEFT/RTGS/OTC “. The tenders without Earnest Money Deposit will summarily be rejected. The Earnest Money Deposit of unsuccessful tenderer shall be refunded. The E.M.D. of the successful tenderer will be refunded or adjusted against Security Deposit, after the tender is accepted and agreement is executed. The Earnest Money shall be forfeited to the Government Treasury in case of breach of any of the conditions governing the supply. If any tenderer withdraws the tender after submission, his / her EMD will be forfeited to Government Treasury.

6. JURISDICTION: The legal jurisdiction is Panaji – Goa.

7. ACCEPTANCE / REJECTION OF BIDS: The State Directorate of Craftsmen Training reserves the right for any changes / cancellation / rejection of any/all offers, without assigning any reason what-so-ever. 8. PRE-DISPATCH INSPECTION: Pre-dispatch Inspection will be carried out from the representative of this Directorate, if required by the Department. However inspection charges will be borne by the tenderer. 9. DELIVERY OF GOODS :- The successful tenderer shall arrange to supply the material at places mentioned in the supply order without any additional charges towards packaging, forwarding, freight,etc. The Tenderer should obtain acknowledgement and issue delivery challan for the material supplied. 10. TIME LIMIT FOR SUPPLY :- The materials should be delivered within the stipulated period specified in the supply order or within short notice depending upon the situation. Any of the materials received in broken or damaged condition the same will have to be replaced by the successful tenderer without any additional cost & within the stipulated period. Any cost incurred on transportation of damaged goods will have to be borne by the supplier

6

11. INSTALLATION:

Installation and free working trial is to be given to all consignees at their sites, wherever

applicable .

12. WARRANTY:

Warranty should be minimum one year for machines as well as for its accessories.

13. PAYMENT TERMS :- 100% payment after delivery of items/equipments and satisfactory commissioning and trial at consignees’ place. The offer should be firm, inclusive of all taxes till the period of delivery. Escalation in prices will not be allowed. Reduction in Taxes / levies by Govt. during the period, the benefit should be passed on to consignees. 14. PERFORMANCE GUARANTEE :- Performance Guarantee / Security Deposit equivalent to 5% of the value of materials/equipment ordered to be submitted within 15 days of the date of supply order by way of Demand Draft/Bank Guarantee in favour of the State Director, Craftsmen Training payable at Panaji – Goa valid till a period of 60 days after the date of expiry of defect liability period or the guarantee/ warranty period, as the case may be. Place : Panaji – Goa State Project Director, Date : State Project Implementation Unit

State Directorate of Craftsmen Training Panaji-Goa

7

Sr No. 3 (3.4) (3)

No Deviation Certificate

Sr. No.

Specification of Equipment mentioned in Tender Enquiry

Specification of Equipment offered by the tenderer

Whether there are deviation from the tender specification Yes / No

If yes indicate clear which are the deviation

(Signature of Tenderer)

8

Sr No. 3(3.3)(3.4)

PRICE STRUCTURE

SR No Description of item offered

Make Unit Qty Rate Amount

9

ANNEXURE-I

LIST OF ITEMS :-

10

Sr. No Description unit Total

Qty. 1 Cut model of 2 stroke single cylinder two wheeler petrol engine on

stand with clutch and gear shifting mechanism. Nos. 1 2 Cut section Model of Mock layout of a motor car -electrical system

working model This demonstration board which will give a complete idea of the electrical system of a car. In this demonstration board the actual wiring with parts and accessories of a car had been arranged, according to the electrical circuit of a car and terminals are provided to connect the battery. By giving connection the working of individual parts such as Self starter, Alternator, Wiper Motor, Horn, Head lights, Tail lamps, Parking lamps, Side indicators, Brake light, Distributor, Sparks of spark plugs, etc., can be demonstrated. The parts sectioned to show the internal constructional details. This is a working demonstration model. Nos 1

3 Cut section models of shock absorbers, telescopic type, shock extended length 294.89 mm, shock collapsed length -196.85mm, length of stroke - 98.04mm with dust cover Nos 1

4 Cut section of cross ply and radial tyres of MMV 265/75R16 size Nos 1 5 Cut section working model of 6 speed automatic transmission Gear

box. The model is made out of full size original used automatic transmission of a car, the transmission will be suitably sectioned to show the internal details, of gear mechanism of forward and reverse speeds. The automatic shifting of the gears can be explained using this model clearly. The model will be mounted on to a tubular frame, with Suitable color painting and antirust treatment. Nos 1

6 Cut section working model of centrifugal clutch assembly. This model is made out of original parts such as Flywheel, Pressure Plate ,Clutch plates, etc. to demonstrate the working of clutch assembly. By operating the pedal provided the model can be demonstrated. The entire model is mounted on a sturdy iron frame. Nos 1

7 Demonstration board of 2W Ignition system, ignition coil for LMV with distributor, spark plug. Key start engine mounted on a steardy painted frame with all accessories and control panel. Nos 1

8 Demonstration board of electronic Ignition system, ignition coil for LMV his open demonstration working unit is made out of original used parts such as switches, Electronic ignition coil, Distributor, four spark plugs and a battery for power source, with necessary wiring connections. By switching on the switch and by giving rotation to the Distributor, Sequential Sparks in the spark plugs can be demonstrated. Nos 1

9 Different type of cut section of piston model of latest engines (atleast 5 types ranges from 2 wheeler to HMV) mounted on a suitable board for demonstration purpose. Nos 3

11

10 Disk brake with caliper assembly for LMV The Model is made out of Original parts such as Two Brake disc, two Calliper assembly (one sectioned), two master cylinder (one sectioned) etc, the model is mounted on a sturdy iron frame and can be demonstrated by operating the lever provided. Nos 6

11 Drum brake assembly for LCV This model is made out of original parts such as Two Brake drum assembly, one master cylinder (one sectioned), wheel cylinders (one sectioned), Brake Shoes, etc., the model can be demonstrated by operating the lever provided. Nos 1

12 Functional/experiment model of different type of sensors for LMV for latest models of MPFI and CRDI vehicles. Nos 1

13 Steering assembly - 1.Rack & pinion,This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame. Nos 1

14 Steering assembly - Recirculating ball, This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame. Nos 1

15 Steering assembly - Worm & roller , This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame. Nos 1

16 Steering assembly Power steering , This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame. Nos 1

17 Synchromesh Gear box mounted on stand for Dismantling and assembling.5-Forward speed & reverse Gear box,with Synchromesh on all forward gear. Ratio:-1st-3.737:1, 2nd-1.963:1, 3rd-1.365:1, 4th-1.0:1 & 5th-0.776:1 & reverse3.402:1. Nos 5

18 Turbocharger cut sectional view with full size original parts suitably sectioned and to demonstrate the working of turbo charger mounted on a suitable base, latest model, mostly of a HMV Nos 3

19 Working Model of power windows forlatest model of LMV mounted on suitable sturdy painted frame and along with all standard accessories. Nos 1

20 Working model of torque converter for HMV mounted on a suitable sturdy painted frame with standard attachment. Nos 1

21 Anvil 50 Kg forged steel with stand Nos 3 22 Arbor press hand operated 2 ton capacity; Capacity (tons) : 2,

leverage ratio : 901006, ram size (inches) 3, maximum diameter work 36 : 1 , throat 1-1/4x1-1/... , largest arbor 14, maximum ram to table : 7 , minimum ram to table : 2 , base length : 11-1/2, base width : 10-3/4 , height (inches) : 7-1/4 , weight (lbs) : 18 ; ISI certified. Nos 3

23 Bench lever shears 250 mm blade x 3 mm capacity Cuts mild steel plates upto 10 mm Max. cut in one stroke 125mm ,Rounds upto mm 16, Length Of blades (approx) 178 mm Nos 1

12

24 Blow lamp 500 mili litre,with brass container and valves Nos 2 25 Chain pulley block - 3 Ton capacity with tripod stand and ISI

certified nos 5

26 Coil spring compressor for suspension spring for LMV Nos 1 27 Connecting rod alignment fixture. HCS & ISI certified

Nos 3 28 Dual magnetization Yoke : AC/HWDC, 230V AC, 50Hz, Pole Distance

: 50 to 300mm , Cord Length : 3 Meters Available with Input Supply : 220V, 50Hz, 1 Phase & 110V, 50Hz, 1 Phase Max Current Drawn : AC - 2.2 Amps DC - 2.5 Amps * Yoke Weight : 4 Kgs, Controls : Solid State Control Nos 3

29 Engineer's stethoscope with earphone amplifier with carbon microphone assembled in a polished wooden box furnished with instruction and a chart of possible different noise Nos 2

30 Executive Auto Electrical tool kit, ISI certified Nos 1 31 Front axle ( Rzeeppa Joint drive shaft) with stand for Dismantling

and assembly Nos 1 32 Fuel injector cleaning kit (in a wooden box complete) Sets 4 33 Glow plug tester. For complete testing of glow plug & ISI certified Nos 2 34 Growler (with company packing and price) ISI certified Nos 4 35 Hand operated Hydraulic press, operating capacity 10 T & ISI

certified Nos 1 36

Horses and wheel choke (Metallic) 04 Nos each 8

37 Horses Propes . 5 ton capacity. Height adjustable from 750 mm to 1500 mm. Nos 8

38 Hydraulic lifting jack trolley type - 5 Ton capacity & ISI certified Nos 4

39 Hydraulic lifting jack trolley type -3 ton capacity and ISI certified

Nos 6 40 Injector cleaning unit & ISI certified

Nos 2 41 Injector dismantling jig with mounting bench No. 1 42 injector testing set (hand tester) & ISI certified Mico make Nos 1 43 lift jack screw type 20 ton capacity with lever & ISI certified Nos 3 44 lift jack screw type 3 ton capacity with lever & ISI certified Nos 3 45 lift jack screw type 5 ton capacity with lever & ISI certified Nos 3 46 Lifting jack screw type C.I. 1000 kg. consists of a diamond shaped

frame having a nut on one side & sleeve on other side Nos. 4 48 Liquid penetrant inspection kit which includes developer &

penetrant for non destructive testing Nos 4 49 Oilstone 15cm x 5cm x 2.5cm(carborendum stone) & ISI certified No. 1 50 Pipe flaring tool compatible to flare copper & M.S. tubings of sizes

1/4", 3/4", 3/8", 5/16", 5/8" & ISI certified Nos 6

13

51 Piston ring compressor for piston diameter of 10-20cm, ISI certified Nos 6

52 Piston ring expander and remover 50 mm & 100 mm. Nos. 7

53 Piston Ring groove cleaner & ISI certified Jhalani make Nos 6

54 Pneumatic rivet gun with standard accessories Blind Rivet Setting Capacity in(mm) :3/32" (2.4); 1/8" (3.2); 5/32" (4.0); 3/16" (4.8) Traction Power:1;586 lbs (720 kgs) Stroke Length: 9/16".(14 mm) Overall Length: 10-3/4" (273mm) Air Inlet (PT): 1/4" Air Hose (ID): 3/8" Jaws : 2 Net Weight: 1.5 kgs (3.3 lbs) " Nos 6

55 Pullers screw powered 2 mm gap with bearing puller attachment (Mechanical Type) Nos. 1

56 Soldering iron, Copper bit, Fire heated , Hatchet type, straight 500 gms & ISI certified Nos 6

57 Spark lighter & ISI certified Nos 2 58 Spark plug spanner 14mm x 18mm x size with handle HCS & ISI

certified Nos 1 59 Steel Tool Box with lock and key (folding type) 400x200x150mm , 5

compartments G.I. powder coated Nos. 29 60 Timing light, 12Volt, PL/240 neon & ISI certified Nos 2 62 Transfer case with stand for Dismantling and assembly for LMV &

4x4 vehicle & ISI certified Nos 1 63 Triple leg grip puller with bearings attachment screw/ hydraulic

Powered max. spread 80, 160, 250, 450 mm Nos. 1 65 Two stage rotary vaccum pump, capable of evacuating upto 50

microns of Hg fitted with gas ballast, anti suck back valve and single phase motor ISI standard along with manual and warrant certificate. Nos 2

66 Ultrasonic Injection cleaning equipment 2lts capacity, compatable with 10mm & 13mm injectors & can check flow,leak & volume test. Nos 1

67 Valve Lifter ISI certified Nos 2 68 Valve seat cutting tools complete with guides and pilot bar (all

angles) Set 1 69 Valve spring compressor universal& ISI certified Nos 2 71 shock absorbers, telescopic type, shock extended length 294.89

mm, shock collapsed length -196.85mm, length of stroke - 98.04mm with dust cover Nos. 4

72 Air bag simulator used in latest LMV Nos 1 73 Air impact wrench with standard accessories & ISI certified Nos 12 74 Air ratchet with standard Accessories & ISI certified Nos 12 75 Alternator assembly used for LMV type SA 108 Nos 2 76 Anti theft device for LMV of latest features and new Nos 1 78 Bearing puller screw powered/hydraulic powered with

attachments Max spread 80, 200 and 300mm Nos. 2 79 C.V. Joint units of 3 different types Rzeppa joint,Perfect circle joint

& Tripod joint Nos. 8

14

80 Car Jet Washer With Standard Accessories. Outlet pressure: 130 bar, flow rate: 360 ltr/hr, rated motor power: 1900 watts, hose length: 8 mtr, supply cable : 6mtr & ISI certified Nos 2

81 Carburator ( Two for LMV Maruti/Hyundai & One for Two Wheeler Splendor).M.34 PBIC

Nos 3 82 Circulating Water Pump 1/2 Hp, 230V, 50Hz, attached with

stainless steel tank capacity 20 ltrs, with inlet & outlet provision Nos 1 83 Constant Mesh Gear box with stand for Dismantling and assembly

constant mesh standard type Gear box,constant mesh on first to fourth gear,fifth direct drive & reverse sliding mesh.GEAR RATIOS:-1st-7.37:1,2nd-4.23:1,3rd-2.49:1,4th-1.56:1,top-1.0:1 & reverse-6.61:1. Nos 1

84 Cylinder liner - Dry liner, press fit liner & ISI certified Nos 3

85 Cylinder liner - wet liner, slide fit liner & ISI certified Nos 3

86 Diaphragm type clutch assembly one each for TATA 407 & Sumo. One each for Maruti/Huyndai Nos 4

87 Different type of engine bearing model of latest diesel engines, split bearings of crank shaft and connecting rod, bush bearings of cam shaft, thrust bearings, etc.mostly of a HMV. Nos 3

88 Distributor -Dual advance type, reluctance type for LMV & ISI certified Nos 3

89 Distributor -Prestolite design-4020 Nos 1 90 Electronic engine control module (suitable for Wagon R) Nos. 1 92 Fuel feed pump for diesel 6 - Cylinder plunger type & ISI certified.

Nos 4 93 Fuel injection pump - pneumatic governor, R.Q. V. governor and

R.S.V. governor. HB-PES 6A 80B 410RS 2405 180 (17.6).Injection pressure 180kg/cm2.

Nos each. 2

94 Fuel injection pump Diesel(In-line) 6 cylinder engine TATA Vehicle & ISI certified make Bosch Nos 3

95 Fuel injection pump dismantling tool kit / Universal Vice & ISI certified Nos 3

96 Fuel injection pump Distributor fuel rotary pump (DPC) pump along with special tools and accessories & ISI certified Nos 2

97 Fuel injection pump VE pump / Distributor fuel rotary pump along with special tools and accessories & ISI certified Nos 1

98 Fuel injection pump VE pump along with special tools and accessories & ISI certified Nos 2

99 Gear box with differential ( Transaxle ) GEAR RATIOS:-1st-7.37:1,2nd-4.23:1,3rd-2.49:1,4th-1.56:1,top-1.0:1 & reverse-6.61:1. No. 1

100 Horn for LMV & ISI certified (Bosch Make) Nos 1 101 Horn relay 4 poles for LMV & ISI certified Nos 1 102 Injector - pintle type & ISI certified. Nos 12 103 Injector -multi hole type & ISI certified Nos 12 104 Injectors Bosch make pintle nozzle suitable for TATA 407 (DIESEL)

Nos. 2

15

105 Oil pump Gear Type for Dismantling and Assembling & ISI certified & latest diesel vehicles Nos 6

106 Petrol Fuel pump of MPFI system (Electronic Type)

No. 1 107

Petrol Injector suitable for Maruti/Huyndai Vehicle. Nos 2

108 Radiator cut section down flow of latest diesel engine HMV (brand new)with reservoir tank, pressure cap, etc, with paint job to highlite different parts,mounted on a suitable frame. Nos 3

109 Radiator cut section of cross flow of latest diesel engine HMV (brand new)with reservoir tank, pressure cap, etc, with paint job to highlite different parts,mounted on a suitable frame. Nos 3

110 Radiator pressure cap of latest diesel engine (brand new) for holding pressure upto 1.5 bar Nos 6

111 Rear axle full floating type with stand for Dismantling and assembly for HMV & new Nos 1

112 Starter motor axial type & ISI certified & 12V Nos 2 113 Starter motor Co-axial type & ISI certified & 12V Nos 2 114 Starter motor pre-engagement type(M35G) , ISI certified &

12V,Gear ratio with teeth on flywheel 15:1 Nos 2 115 Tandem master cylinder with booster Heavy Duty, new & ISI

certified Nos 20

116 Tubed tyre of car, width 155 R13 & ISI certified & new Nos 3

117 Tubed tyre of motorcycle width 100 R17 Nos 1 118 Tubed tyre of trucks width 10.00 R 20 Nos 1 119 Tubeless tyre of trucks 10.00 R 20 Nos 1 120 Tubeless tyre of cars width 155 R13 Nos 1 121 Tyre & split rim wheel assembly for HMV 10.00 R20 Nos 1 122 Water pump(Centrifugal type) of automobile Engine cooling

system (latest type) of HMV for dismanting and assembling. Nos 12 123 Wheel cylinder of LMV & ISI certified

Nos 12 124 Wiper motor assembly for LMV& ISI certified, latest model Nos 2 125 Carburetor repair tool kit (complete in wooden box) Nos 1 126 Cylinder ridge remover/cutter.SS Nos. 1 127 Tin smiths bench folder suitable for bending MS plate of length

1000mm,thickness 1.63 mm/16 Gauge,Width 600 mm with all its accessories,suitable dial to bend the sheet at angle between 0 to 135 degrees. With a mounting stand of minimum 1 Mtr height. Nos 2