tender document for electrical work for … tender... · tender document for electrical work for...
TRANSCRIPT
BANK OF INDIA ZONAL OFFICE
BHUBANESWAR
TENDER DOCUMENT
FOR
ELECTRICAL WORK FOR BRANCH &
E-GALLERY OF BANK OF INDIA,
KALINGA VIHAR BRANCH
Prepared by:
Architects Chamber 07,Bivab Estate, Baramunda
Bhubaneswar, Ph-0674-2563849 [email protected]
2
NOTICE OF INVITATION TO TENDER
Sealed tenders on item rate basis are invited from empanelled electrical contractors
having sound technical and financial capacity for ELECTRICAL WORK FOR
BRANCH & EGALLERY OF BANK OF INDIA, KALINGA VIHAR BRANCH, ..
Tender documents may be collected from the office of Architects Chamber 07,Bivab Estate, Baramunda Bhubaneswar against payment of Rs 500.00
(Rupees Five hundred) only (non-refundable) by A/C payee Demand Draft drawn on
Bhubaneswar.
Estimated cost of the Project : Rs 2.42 Lakh
Earnest money : Rs 3000.00 by A/C demand draft drawn in
favour of Z.M. BANK OF INDIA,
BHUBANESWAR.
Time of completion : 15 days
Tender paper sale date : 09.02.2016 to 17.02.2016
Time and date of : before 14.30 hrs on 17.02.2016 as per
Submission of tender instruction tender documents
Time and date of
Opening of tender : at 15.30 hrs on 17.02.2016
The bank will not be bound to accept the lowest tender and reserve the right to accept or
reject any or all the tenders without assigning any reason whatsoever.
ZONAL MANAGER
BANK OF INDIA,
ZONAL Office
BHUBANESWAR
3
GENERAL RULES AND INSTRUCTIONS
FOR THE GUIDANCE OF TENDERERS
1. Tenders are hereby invited on behalf of BANK OF INDIA, ZONAL OFFICE,
BHUBANESWAR, for ELECTRICAL WORK FOR BRANCH &
EGALLERY OF BANK OF INDIA, KALINGA VIHAR BRANCH, . Contract
documents consisting of the plans complete specifications, the schedule of
quantities of the various class of work to be done, and the set of conditions of
contract to be complied with by the persons whose tenders may be accepted, and
which will also be found in the form of tenders, can be seen at Architects Chamber 07,Bivab Estate, Baramunda Bhubaneswar and BANK OF
INDIA, ZONAL Office, BHUBANESWAR, between the hours of 10.30A.M to
5.30P.M, from 09.01.2016 to 17.01.2016 and every day, except on Sundays and
bank holidays
2. Tenders, which should always be placed in sealed cover with the name of the
project written on the envelopes will be received by Sr. Manager (Premises),
BANK OF INDIA, ZONAL Office, BHUBANESWAR, up to 14.00 hrs on
17.02.2016 and will be opened in his office on the same day at 15.30 hrs.
3. The time allowed for the carrying out of the work will be 15 days from the day
after the date of written orders to commence work.
4. The contractors should quote in figures as well as in words the rate, and
amount tendered by them the amount fore each item should be worked out and the
requisite totals given.
5. When a contractor signs a tender in an Indian language the percentage above or
below and the tendered amount and the total amount tendered should also be
written in the same language in the case of illiterate contractors the rates or the
amounts tendered should be attested by a witness.
6. Earnest money, amounting to Rs. 3000.00 in the form of bank draft drawn in
favour of Z.M. BANK OF INDIA, BHUBANESWAR. must accompany each
tender and each tender is to be in a sealed cover super scribed tender for
ELECTRICAL WORK FOR BANK OF INDIA, KALINGA VIHAR BRANCH, and addressed to the Z.M., BANK OF INDIA, ZONAL Office,
BHUBANESWAR.
4
The contractor, whose tender is accepted, will be required to furnish by way of
security deposit for the due fulfillment of his contract, such sum as will amount to
10.00% of the work order.
The EMD of the contractor, whose tender is accepted, shall be forfeited in full in
case he does not remit the Initial security deposit within the stipulated period or
start in the work by the stipulated date mentioned in the award letter.
7. The acceptance of a tender will rest with the ZONAL MANAGER, BANK OF
INDIA ZONAL Office, BHUBANESWAR which does not bind itself to accept
the lowest tender, and reserves to itself the authority to reject any or all of the
tenders received without the assignment of a reason. All tenders in whom any of
the prescribed conditions are not fulfilled or are incomplete in any respect are
liable to be rejected.
The bank reserves the right to accept the tender in full or in part and the tenderer
shall have no claim for revision of rates or other conditions if his tender is
accepted in parts.
8. Canvassing in connection with tenders is strictly prohibited and the tenders
submitted by the contractors who resort to canvassing will be liable to rejection.
9. All rates shall be quoted on the proper form of the tender alone.
10. An item rate tender containing percentage below/ above all is summarily rejected.
However, where a tender voluntarily offers a rebate for payment within a
stipulated period, this may be considered.
11. On acceptance of the tender, the name of the accredited representative(s) of the
contractor who would be responsible for taking instructions from the
Employer/Architects shall be communicated to the Employer.
12. Special care should be taken to write the rates in figures as well as in words and
the amounts in figures only, in such a way that interpolation is not possible. The
total amount should be written both in figures and in words. In case of figures, the
words “Rs.” Should be written before the figure of rupees and words “P” after the
decimal figures, e.g. Rs. 2.15p and in case of words, the word “Rupees” should
precede and the word “Paise should be written at the end, unless the rate is in
whole rupees and followed by the words, only”, it should invariably be up to two
decimal places. While quoting the rate in schedule of quantities, the word “only”
should be written closely following the amount and it should not be written in the
next line.
13. The bank does not bind itself to accept the lowest or any tender and reserves to
itself the right of accepting the whole or any part of the tender and the tender shall
be bound to perform the same at the rate quoted.
5
14. All taxes including Sales Tax or any other tax on material or on finished works
like works contract tax, Turn over Tax, etc. in respect of this contract shall be
payable by the contractor and the bank will not entertain any claim whatsoever in
this respect.
This particular aspect should be mentioned in the tender
15. The contractor shall give a list of his relatives working with bank along with
their designations and addresses
16. No employee of the bank is allowed to work as a contractor for a period of two
years of his retirement from Bank service, without the previous permission of the
Bank. The contract is liable to be cancelled if either the contractor or any of his
employees is found to be worked as a bank employee within two years of the
contract and he has not taken permission from the bank to do so.
17. The tender for the work shall not be witnessed by a contract or contractors who
himself/themselves has/have tendered or who may and had/have tendered for the
same work Failure to observe this condition would render tenders of the
contractors tendering as well as witnessing the tender liable to summary rejection.
18. It will be obligatory on the part of the tendered to tender and sign and tender
documents for all the components parts and that, after the work is award, he will
have to enter into an agreement for each component with the Competent
Authority in the Bank.
19. The tendered, apart from being a competent contractor must associate himself
with agencies of the appropriate class who are eligible to tender for (1) Electrical
(ii) Sanitary and Water Supply installations and (iii) Horticulture.
20. The quantity of work can be reduced or increased depending upon the
requirement before/during the commencement of the work
Zonal Manager
BANK OF INDIA
ZONAL Office
BHUBANESWAR
6
LIST OF APPROVED MAKE FOR ELECTRICAL WORKS
SlNo Material Description Make of materials
01. M.S.conduit pipe BEC/Supreme/Kalinga/Any other
make with ISI mark
02. M.S.conduit accessories Universal/ Laxmi
03. Switch,socket,holder,ceiling MK India/Legrand/ABB
rose,modular switch box etc SchneiderElectric(ZENCELO)
04. PVC insulated wires Finolex/L & T/ HAGOR/Anchor
05. Bakelite sheets Hylam/Formica
06. PVC insulated cables NICCO/INCAB/Fort Gloster/CCI/
(with ISI mark only) Universal
07. Cable lugs Dowells/Ismal/Clipon
08. Cable jointing kits M Seal
09. Switch gears viz isolator EE/Siemens/L&T/Havells/GEC
switches,SFU,starter,change Alsthom/Indo-Asian
over switch,HRC fuse holder etc
10. MCB, RCCB and associated MDS/L & T/Standard/LEGRAND
distribution board
11. Instrument viz voltmeter etc AE/IMP/Meco
12. Selector switch Kaycee/Saltzer
13. Energy meters GEC/Capital/Jaipur/Havells
14. LT Distribution Board ESS/VeeESS/Technocrat/East
7
(Fabricated) Coast or any other standard
panel manufacturing unit.
15. Kitkats Anchor
16. HRC fuses EE/Siemens/L&T/Indo-Asian
17. CTs & PTs AE/Kappa/Eastern Switchgear
———————————————————————————————-
SlNo Material Description Make of materials
———————————————————————————————-
18. Metal clad plug socket Crompton/Havells/Indo-Asian
19. Trim tubes/ Structurella Decon
20. CFL/Fluorescent fixtures Philips/Crompton/Bajaj/PACE/K-Lite/Indo
Asian
21. Lamps (CFL/Fluorescent) Philips/Bajaj/Crompton/ECE/
Sylvania/Osram
22. Cabin & Pedestal fans Crompton/Khaitan/Usha/Orient
Almonard
23. Exhaust fan Almonard/Crompton
Khaitan
24. Adhesive & Insulating Tapes Steelgrip
25. G.I.Pipes TATA/Jindal/Prakash
26. Clip-in-type modular switches MK(India)/Legrand/ABB
& plug sockets. Schneider Electric(Zencelo)
————————————————————————————————
8
ELECTRICAL WORK OF BRANCH & EGALLERY COUNTER OF BANK OF INDIA,
KALINGA VIHAR BRANCH, BHUBANESWAR
ABSTRACT OF TENDER
SEC NO. DESCRIPTION AMOUNT
1
ELCTRICAL WORK OF BRANCH
2
ELCTRICAL WORK OF EGALLERY
SUMMURY
Section-1 ELECTRICAL WORK OF BRANCH
SL NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT
A PANELS, DBs, CABLING,
1 MAIN INCOMING PANEL (MIP)
9
Supply, installation, testing and commissioning of
wall /floor mounted indoor type, air insulated, totally
enclosed vermin-proof, dead front, cubicle type, 2
mm thick sheet steel enclosure main incoming (MIP)
Panel suitable for use on 415 V, 3 Ph., 4 wire, 50 Hz.
A.C. system, incoming and outgoing cable
compartment. Each unit shall be accommodated in a
totally separate compartment having gasketted
hinged door with locking arrangement. The Panel
shall be complete with MCCBs/MCB of following
ratings, interconnection, G.I. earth busbar of
adequate size covering the total length of panel board
with drilled holes, G.I. bolts, nuts, washers etc.
The cubicle should be painted with 2 (two) coats of
light grey synthetic enamel paint over two coats of
zinc chromate primer. The complete fabrication,
construction shall be done as per the detailed
specification and conforming to the relevant IS.
Name plate of Panels Danger Board, incoming and
outgoing feeders with Ampere rating of MCCB/MCB
are to be fixed up on front door above or below the
respective switches. Short circuit I.C. of all MCBs
should be of 10 KA (min.) Approval of
Manufacturer’s drawings from Consultant /
Employer is required before commencing
manufacture.
The MIP consists of the following
Incoming- 1No 125 A TPN SDF with HRC switch
125A bus bar- 2 No.
63 A Change over
Phase indicator lamp.
PVC sleeved TPN Tinned Copper Busbar
Out going- 5 Nos 32 A DP MCB for A.C
1Nos 32A DP MCB for LDB/PDB
1Nos 32 A SP MCB for Glow sign Board.
2Nos 40 A FP MCB for UPS
1-500 Amp. Meter with selector switch Volt meter 1.00 Set
Rate in Words :
10
2 MCB DISTRIBUTION BOARD
Supply, installation, testing and commissioning of
following MDS make Legrand Distribution Board in
sheet steel enclosure with double door and suitable
for mounting on wall by chase cutting and flushed
with finished level to the position shown in the
Electrical Layout complete in all respect, mending
good all damages to the original finish, painting,
interconnection, etc. as required. Short circuit I.C. of
all MCBs should be 10 KA (minimum) and RCBOs
should have earth leakage, overload and short circuit
protection. Name plate of DB’s to be fixed / written
on front door alongwith switch board numbers / DB’s
at the outgoing.
a LIGHTING DISTRIBUTION BOARD (LDB)
12 way vertical type DP DB complete with busbar
and the following MCB.
Incoming :
1 No. 32A DP MCB
Outgoing
10 No. 6-10 A SP MCB
02 Nos. Blank plate 1 No
Rate in Words :
b DB WITH 32A SPN MCB
Double pole 1way MCB DB in sheet steel enclosure
with 1 No. 32A SPN MCB complete with
interconnection, etc. as required for operation of
Glow Sign Board. 1 No
Rate in Words :
B WIRING, EARTHING
SUBMAIN WIRING
11
Submain wiring with following sizes 1100 V grade,
single core, PVC insulated flexible FRLS copper
conductor cable (IS:694) through suitable size M.S.
conduit (ISI marked embossed on conduit surface)
complete with junction box, circular box, elbows,
bends and other accessories on surface above false
ceiling or concealed by chase cutting on wall, as per
site condition, mending good all damages to original
finish, interconnection, painting etc. as required to be
completed in all respect. All connections of wires to
be done by means of “Wago” type connectors:
1
A. Recessed wiring with 2x (1x1.5sqmm) + 1x
(1x1.0sqmm) copper wire 40 Mts.
Rate in Words :
2 B. Recessed wiring with 2x(1x2.5sqmm)
+1x(1x1.5sqmm) copper wire. 30 Mts.
Rate in Words :
3 C. Recessed wiring with 2x (1x4sqmm) + 1x
(1x2.5sqmm) copper wire. 40 Mts.
Rate in Words :
4 A.C DB
Supply& fixing of 3ph-4way. Triple pole and neutral,
sheet steel MCB double door distribution box with
9nos of 6to 32amps, 10ka rating, 240volts, single
pole miniature circuit breaker, & and 1no 40a 4p
MCB complite with tinned coper busbar, neutral link,
earthbar, din rail, detachable gland,complite with
connections ,testing, commissioning etc,as required, 1 NO
Rate in Words :
A.C. POWER POINT WIRING :
12
A.C. power point wiring from DB with 1100 volt
grade 2 Nos. single core 4 sq.mm. + 1 No. 2.5sq.mm.
(Green colour for earthing) PVC insulated flexible
FRLS copper conductor cable through suitable size
PVC. conduit (ISI marked embossed on conduit
surface) complete with junction box, circular box,
elbows, bends, couplers and other accessories on
surface above false ceiling or concealed by chase
cutting on wall complete with North-West make AC
power unit having 25A Socket, 20A Starter,
mounting box & front plate, interconnection,
mending good all damages to original finish, painting
etc. as required. All connections of wires to be done
by means of ‘Wago’ type connectors. (INCLUDING
E LOBBY)
5 a) Recessed wiring with 2x (1x4sqmm) + 1x
(1x2.5sqmm) copper wire 50 Mts.
Rate in Words :
6
b)Supply & Installation of Modular type 20 Amp
A/C starter with 25 Amp Socket & Top 6.00 Set
Rate in Words :
6 / 16A SOCKET OUTLET POINT WIRING
7
Wiring for 6 pin 6/16 A shuttered socket outlet with
controlling switch from DB with 1100 volt grade 2
Nos. single core 2.5 sq.mm. + 1 No. 1.5 sq.mm.
(Green colour for earthing) PVC insulated flexible
FRLS copper conductor cable (IS:694) through
suitable size M.S. conduit (ISI marked embossed on
conduit surface) complete with junction box, circular
box, elbows, bends, couplers and other accessories
on surface above false ceiling or concealed by chase
cutting on wall
13
The work includes supply & fixing of non - modular
type 6/16A 6 pin shuttered socket outlet with
controlling switch, indicator, suitable size mounting
box and front plate for socket outlet flushed with
finished wall, mending good all damages to original
finish, interconnection, painting, etc. as required to
be completed in all respect. All connections of wires
to be done by means of ‘Wago’ type connectors. 6 No
Rate in Words :
POINT WIRING
Point wiring with 1100 V grade 3 nos. single core 1.5
sq.mm. (1 for phase, 1 (black colour) for common
neutral by looping method and 1 (green colour) for
common earth by looping method) PVC insulated
flexible FRLS copper conductor cable (IS:694)
through suitable size PVC. conduit (ISI marked
embossed on conduit surface) complete with junction
box, circular box, elbows, bends, couplers and other
accessories on surface above false ceiling or
concealed by chase cutting on wall from light & fan
switch board to light, fan & 6A socket outlet on the
same switch board or separately mounted switch
board.
The work includes supply and fixing of all materials
such as non - modular type 6A switch for each light
and fan point, 6A 2/3 pin shuttered socket outlet with
switch, 3 plate ceiling rose / angle or batten holder
etc. as required. The point wiring also includes
circuit wiring with 1100 V grade 2 nos. single core
2.5 sq.mm. (1 for phase and 1 (Black colour) for
neutral) + 1 no. single core 1.5 sq.mm. (Green colour
for earth) PVC insulated flexible (FRLS) copper
conductor cable (IS:694) through suitable size M.S.
conduit as described above from DB to switch
board, interconnection, mending good all damages to
original finish, painting etc. as required to be
completed in all respect.
14
All connections of wires to be done by means of
“Wago” type connectors. (All wiring in strong room,
locker room, records & stores will be of surface
conduit type.)
Light points
8 a) With one 5Amp switch controling Two nos of
light points 18 No
Rate in Words :
9 b) With one 5Amp switch controling One nos of light
points 22 No
Rate in Words :
10 Wall Bracket fan point with 2/3 pin socket outlet
installed at fan height & switch at the light fan switch
board. 7 No
Rate in Words :
11 Exhaust fan point 3 No
Rate in Words :
12
Ceiling fan point with supply and fixing of electronic
regulator (2 module step, 280 watt ( min.) ) 2 No
Rate in Words :
13 Call bell point with bell push 1 No
Rate in Words :
14 1x6A 2/3 pin shuttered socket with switch on
separate switch board other than light / fan switch
board / on work stations with connection of
maximum 2 Nos. Sockets in one circuit by looping
method 18 No
Rate in Words :
15 1 X 6A 2/3 pin shuttered socket outlet with switch on
light and fan switch board. 7 No
Rate in Words :
15
16 Connecting the Main Incoming panel to existing
earth busbar including supply and fixing of 6 SWG
G.I. wire along the cable with G.I. staples, bolts,
nuts, washers, etc. and mending good all damages to
original finish. 15 Mtr.
Rate in Words :
17 Earthing (General)
Earthing the installation as per I.E rules conforming
to IS : 3043 or its latest ammendment by making
earth station with 600 mm x 600 mm x 6 mm
(minimum) thick G.I plate electrode to be installed
such that its top edge shall be at a minimum depth of
3.0 metre below ground level after preparation of
ground with charcoal and salt and connecting the
25mm x 6mm G.I earth lead-in-strip directly in
ground by bolting and then brazing to the G.I plate
complete with G.I bolts of suitable length double nuts
and washers including supply and fixing of 50mm
dia. partly perforated G.I. pipe with funnel for
watering arrangement.
The earthing installation should be provided with
300mm x 300mm and 300mm depth inside
dimension masonry inspection pit with C.I. hinged
cover having locking arrangement, test link of size
150 mm length x 25mm x6mm G.I flat connected to
G.I earth lead-in-strip and restoring the surfaces duly
rammed. 2 No
Rate in Words :
18
Supply & fixing of fan-hook / clamp by cutting roof
slab and welding 10 mm dia. Fan hook with main re-
inforcement of roof slab complete in all respect. 2 No
Rate in Words :
19
Supply and fixing of 1.5 meter length 3 core 2.5
sq.mm PVC insulated copper wire with 3 pin 6A
plug top at one end and the other end to be fixed with
Switch Board of strong room. 1 No
16
Rate in Words :
C INSTALLATION OF LIGHT FITTINGS & FAN
Installation of following light fittings with lamp and
other electrical fittings including all accessories :
1
Installation, testing and commissioning of 2x18 W
LED light fitting with LED lamps in 1' X 1' Grid
directly on ceiling including supplying and fixing of
2 nos. M.S. clamps or hard wood round block
properly shelac polished suitable for wall / ceiling
mounting including interconnection between light
points and fittings with 3 nos. single core / 3 core
1.5sq.mm. PVC insulated flexible FRLS copper
conductor cable, painting etc. as required. 10 No
Rate in Words :
2
Installation, testing and commissioning of 2 x 18 W
LED light fittings with lamp including supply and
fixing of 10 SWG G.I wire for hanging of fittings
flushed to the false ceiling, 20mm dia. M.S flexible
conduit (800 mm approximately) including
interconnection between light points and fittings with
3 nos. single core / 3 core 1.5sq. mm PVC insulated
flexible FRLS copper conductor cable, painting, etc.
as required. 10 No
Rate in Words :
3 Installation, testing and commissioning of ceilling
mounted LED down light lurninaire recessed in
false ceiling complete with attachment, 1x10 W
lamp, all other accessories, interconnection etc. as
required. 26 No
Rate in Words :
17
4
Installation, testing and commissioning of 1200 mm
sweep capacitor type ceiling fan complete with
blades, down rod and all other accessories to the
position as shown in the drawing, painting the down
rod and interconnection between fan points and fan
with 3 nos. single core/3 core 1.5sq.mm PVC
insulated FRLS flexible copper conductor cable as
required. 2 No
Rate in Words :
5
Installation, testing and commissioning of heavy duty
type ISI marked 400 mm dia. wall bracket fan
suitable for 240V single phase 50 Hz. A.C. supply
complete with all accessories and interconnection
between fan points and fan with 3 core 1.5sq.mm (1
for earth, green colour) PVC insulated flexible FRLS
copper conductor cable, painting, mending good etc.
as required. 7 No
Rate in Words :
6
Installation, testing and commissioning of heavy duty
type ISI marked 300mm dia. Exhaust fan suitable for
240V single phase 50 Hz. A.C. supply complete with
louvre, interconnection between fan points and fan
with 3 nos. single core/3 core 1.5sq.mm PVC
insulated flexible FRLS copper conductor cable,
making suitable size holes on wall to accommodate
the fan, mending good to the original finish, painting
etc. as required. 3 No
Rate in Words :
7 Supplying and fixing on wall call bell buzzer
(approved by Consultant) suitable for 230 volt single
phase A.C. supply including interconnection, etc. as
required. 1 No
Rate in Words :
18
8 Supply and fixing of additional length of down rod
for ceiling fan having 100mm length. (50mm length
or more to be rounded off to the 100 mm and less
than 50 mm length will not be considered for
payment). 2 No
Rate in Words :
D COMPUTER POWER WIRING
1 UPS INPUT DB
Supply,fitting and fixing in position single phase
UPS input DB,(company made with double door
cover to be used ) M.S. Cubical Type duly flushed
with the wall surface
Incoming -63amp, Isolater 2Pole -1no
Out going -40 amp,DP MCB -2nos 1 set
Rate in Words :
2 UPS OUTPUT DB
Supply,fitting and fixing in position single phase
UPS OUTPUT DB,(company made with double door
cover to be used ) M.S. Cubical Type duly flushed
with the wall surface
Incoming -63amp, DP MCB -1nos
Out going -40 amp,DP MCB -2nos 1 set
Rate in Words :
3 COMPUTER DISTRIBUTION BOARD (CDB)
19
Supply and installation of following Legrand make
metallic double door MCB Distribution Board with
MCB having breaking capacity of 10 KA (minimum)
or RCBO of 300 mA sensitivity complete with
busbar, interconnection, painting, mounted on flat
iron frame on wall/flushed with finished wall by
chase cutting, mending good to original finish
painting etc. as required. Name plate & number of
DBs are to be fixed up on front door of DBs for their
identification. RCBOs should have over load, short
circuit & Earth leakage protection.
SPN 8 way consumer unit MCB DB complete with
busbar and the following RCBO/MCBs :
INCOMING :
1 No. 240V 32 A DP MCB
OUTGOING :
8 Nos. 240V 6A/10 A SP MCB. 1 No
Rate in Words :
SUBMAIN WIRING :
Submain wiring with following size 1100 V grade,
single core, PVC insulated flexible FRLS copper
conductor cable conforming to IS : 694 through
suitable size PVC conduit (ISI mark embossed on
conduit surface) and conduit accessories partly on
surface (above false ceiling) with M.S. bar saddles,
partly through partition and partly concealed in wall /
embedded in floor by chase cutting, mending good
all damages, painting, etc. as required to be
completed in all respect.
From MIP to incoming socket DB with 2 nos.6
sq.mm + 1 nos. 4 sq.mm. (green colour for earth)
PVC insulated flexible FRLS copper cable through
suitable size M.S conduit. 20 Mtr.
Rate in Words :
20
4 From outgoing socket DB to CDB with 2 nos. 4
Sq.mm. + 1 no. 2.5 Sq.mm. (Green colour for earth)
PVC insulated flexible FRLS copper conductor cable
in suitable size M.S.conduit.
18 Mtr.
Rate in Words :
5 COMPUTER SOCKET OUTLET CLUSTER
POINT WIRING
Computer socket outlet cluster point wiring with
1100 V grade 3 nos. single core (1 for earth, green
colour) .
1.5 sq.mm. PVC insulated flexible FRLS copper
conductor cable conforming to IS : 694 through
suitable size PVC.conduit (ISI mark embossed on
conduit surface) and conduit accessories partly
through concealed in wall, embedded in floor, partly
on surface above false ceiling and partly through
partition or through flexible conduit from DB to
computer socket outlet cluster as detailed below and
upto connection of 2 nos. socket clusters in 1 (one)
circuit connecting by looping method. The work
includes supply and fixing of non - modular type
socket outlet clusters components as detailed below.
A. Recessed wiring with 2x(1x2.5sqmm) +
1x(1x1.5sqmm) copper wire. 60 Mts.
Rate in Words :
6 Each computer socket outlet cluster comprising the
following :
2 nos. 6A 2/3 pin shuttered socket ;
2 nos.6A controlling switch ;
1 no. Front cover of suitable size ;
1 no. Mounting box of suitable size .
1 no. 16/6A 6 pin shuttered socket
1 no. 16 A controlling switch with indicator 6 Set
Rate in Words :
EARTHING (COMPUTER)
21
7
Providing and fixing of chemical earth elect road
made out of 50mm dia class-B Asahalock or
equivalent 2m length with copper plate made out of
600x600x3.15 mm tinned copper plate along with
one number 40x5mm tinned copper strip grazed with
the plate buried vertically with top edge of the plate
at a depth of 1500 mm with arrangements for
termination of copper strip of earth continuity
conductor including cost of charcoal, salt reign soil,
water pouring arrangements brick missionary enclose
on top with R.C.C cover complete with labour and
material as per direction of Engineer-in- charge. 1.00 Set
Rate in Words :
8 The earth lead by 8sq.mm PVC single core cupper
wire in GI pipe to connect from earth electrodes to
UPS outgoing earth bus & as per direction of
Engineer-in-charge. 15 Mtr
Rate in Words :
E COMPUTER DATA/TELEPHONE SYSTEM
1 TELEPHONE SOCKET
Supply and fixing on wall / furniture / partition
recessed type non - modular telephone socket outlet
(RJ 11) with mounting box & front plate as shown in
the drawing complete with chase cutting, mending
good etc. as required
2 No
Rate in Words :
2 COMPUTER DATA SOCKET
Supply and fixing on wall / furniture / partition
recessed type D - Link make non - modular
Computer data socket (RJ 45) with suitable
mounting box & front plate as shown in the drawing
complete with chase cutting, mending good etc. as
required.
9 No
22
Rate in Words :
3 TELEPHONE JUNCTION BOX
Supply and fixing of 5 pair telephone junction box
“Krone” make on wall /furniture/partiion with
hinged cover and screwed type tag strips complete
with chase cutting, mending good, painting etc. as
required. 1 No
Rate in Words :
4 TELEPHONE WIRING
Supplying and laying of 1 -pair 0.5 mm dia. PVC
insulated telephone cables through pre-laid rigid
PVC conduit as shown in the drawing or otherwise
as directed by the consultant from Telephone
Junction Box to Telephone socket outlet including
interconnection mending good etc. as required to be
completed in all respect.
30 Mtr.
Rate in Words :
5 COMPUTER DATA WIRING
Supplying and laying of CAT – 6 LAN cables
through pre-laid rigid PVC conduit as shown in the
drawing or otherwise as directed by the consultant
from server to HUB, HUB to Computer Data Socket
including interconnection mending good etc. as
required to be completed in all respect.
80 Mtr.
Rate in Words :
6 Supply & Installation of 19” 9U Rack with
cable manager and other assessors of approved brand
and make as per direction of engineer in charge
including all labour 1.00 Nos.
Rate in Words :
7 Supply & Installation of 16 port switch with all
connections and commissioning.
1.00 Nos.
23
Rate in Words :
8 Supply & Installation of 24 port Patch Panel
with all connections and commissioning. 1.00 Nos.
Rate in Words :
9 PATCH CORD
(make- D- LINK/Equivalent)
For 2 mtr. Long 6 No
Rate in Words :
10 Termination & link testing of LAN cable
at both the end. 6 No
Rate in Words :
Section-2 ELCTRICAL WORK OF EGALLERY
1 SITC of 32 amps four pole Change over switch in metal enclosore make- Indo-kopp"c" category for alternate power supply from branch office UPS to EGALLERY UPS. Set 1
Rate in Words :
2 SITC of20 amps 3 pin Single phase 230 volt industrial plug & socket controlled by 25 Amps DP MCB in MS enclosure of MDS make for feeding power to AC unit. No 2
Rate in Words :
3 SITC of5/15 amps universal sockets controlled by 15 amps SP switch in PVC enclosure . Switches shall be modular type of Anchor/ Roma.3 pin Single phase 230 volt industrial plug & socket controlled by 25 Amps DP MCB in MS enclosure of MDS make for feeding power to AC unit. No 2
Rate in Words :
4 Lighing/ UPS/Power Wiring.
a Supplying & wiring two runs of 2.5 sqmm & one run of 1.5 sqmm Cobra/ Finolex/Anchor make PVC insulated flexible multistrand copper wire in 19 mm dia 2mm thick universal make PVC conduit/ casing capping as required for UPS distribution (1 socket in 1 circuit.) mtr 10
Rate in Words :
24
b Supplying & wiring two runs of 4 sqmm & one run of 1.5 sqmm Cobra/ Finolex/Anchor make PVC insulated flexible multistrand copper wire in 25 mm dia 2mm thick universal make PVC conduit/ casing capping as required from UPS DB to UPS source from main DB to AC & UPS.This items should be used for signage wiring. mtr 10
Rate in Words :
c 4x6sqmmcopper conductor PVC insulated wires & 1 R of 8 SWG bare copper wire in 40 mm PVC conduit for providing power to EGALLERY MCB DB from main Power switch board. The pipe should be laid in including termination. mtr 10
Rate in Words :
5 Point Wiring
Supplying & wiring 2 Runs of 2.5 sqmm & 1 Run of 1 sqmm Cobra/ Anchor/ Finolex PVC insulated flexible multistrand copper wire in 19 mm dia 2mm th. Universal make PVC conduit / Casing capping above false ceiling / inside ceiling as required from switch box to individual points only Anchor/ Roma switches plate & boxes shall be used.
a Single Light Point controlled by 6 amp. Switch. No 6
Rate in Words :
b 6 amp socket points (independent ) with switch. No 4
Rate in Words :
6
Installation of lighing fixtures with tubes including all accsesories for fixing complete make should be Philips/Baja/Crompton.
a
Fitting & Testing of ceiling LED Down Light 1x 10 watt lamp. No 6
Rate in Words :
7 Access Lock fixing incoordination with EGALLERY vendors. Job 1
Rate in Words :
GRAND TOTAL RS.