temperature product catalog - edl-inc.com

The Temperature People®Since 1943

Temperature Product Catalog

All Industries

Served.

www.edl-inc.com | 1.800.342.5335

Temperature Catalog 1.800.342.5335 www.edl-inc.com

Wire Transfer, Check or PayPalU.S. Currency Electronic Development Labs, Inc. 244 Oakland DriveDanville VA, 24540

Easy Ordering

[email protected]

Shop our online store!

PHONE1.800.342.5335434.799.0807 Monday - Friday 8:00am-5:00pm EST

FAX434.799.0847

TECHNICAL SUPPORTCall 1.800.342.5335 or 434.799.0807

EmailProduct Development Team:[email protected] General Service & Support:[email protected]@[email protected]

The Temperature People®

Feel confi dent in purchasing from EDLSince 1943, customer sa sfac on has been our number one goal. By purchasing an EDL product, you are ensuring longevity and accuracy of your equipment, while minimizing costly down mes associated with faulty equipment.

Solve your manufacturing dilemmaOur advisors are proven problem solvers with prac cal hands-on knowledge and technical exper se. Let us recommend the best product for you. Don't see what you need? We will engineer a solu on based on your specifi c needs.

Get ongoing technical supportEDL combines technical exper se with a broad selec on of products to ensure you're ge ng the right product. Once EDL has provided a custom solu on to fi t your needs, our support staff remain available for ongoing assistance.

USA crafted - best product availableAll of our products are hand cra ed by skilled toolsmen and engineers here in the USA. We are The Temperature People® and we will supply you with the best solu on for your manufacturing quandary.

Check out additional products at:www.edl-inc.com

The Temperature People® -EDL is known for prompt service, superior quality and compet-itive pricing. Call The Temperature People® or visit our website to learn more about EDL’s innovative temperature measuring equipment, calibration product line, and Fire Service/Burn Building Products.

For more information on any of the products listed in this catalog, or if you are looking for a product not listed here, call us at 800.342.5335 or email [email protected] sell nationally and internationally.

1

Connect with us on Facebook!facebook.com/electronic.development.labs

www.edl-inc.com 1.800.342.5335 Temperature Catalog

Products -Thermocouples, RTDs, Thermistors, full range of Precision Handheld Pyrometers and Accessories, Temperature Controllers, Wire and Shielding, Metrology Instrumenta on, Data Loggers, Complete Temperature Kits, and much more. All hand cra ed in the USA.

Product Engineering Services -EDL’s headquarters is home to an advanced laboratory where experienced engineers are ready to provide you with quality products and services that will exceed your expecta ons. Our temperature measurement experts are here to give you advice for those seemingly unsolvable problems.

Calibration Services -Our metrology lab will help you meet your quality control requirements by off ering calibra on services traceable to The Interna onal Temperature Scale (ITS90) and The Na onal Ins tute of Standards and Technology (NIST).

Instrument Repair -EDL’s repair department will help you cut costs and extend the life of your equipment. Call 1.800.342.5335 or email us at [email protected].

Custom Services -Even if you have an idea of what you need and you do not see it in our catalog, contact our sales department and we will produce the product you need. Whenever needed, we design and manufacture products based on your exact specifi ca ons. If you describe your applica on we will supply a solu on.

Assured Quality Sensors

EDL assured quality sensors are robust in design and feature high accuracy with remarkable reliability. Unlike other companies, EDL does not mass-produce sensors. EDL’s sensors are hand-cra ed with me culous care given to the technical considera ons that are so o en overlooked. Our prices are compe ve, even though our sensors excel. EDL’s goal is to produce the fi nest product that money can buy. Our assured quality sensors guarantee you will be sa sfi ed with their performance and overall quality.

Contact EDL for all of your temperature service needs:

[email protected] Served

• Power & Energy• Laboratory• Oil, Gas, Petrochemical• Pharmaceu cal• Chemical • Pulp & Paper• Plas cs• Food & Beverage• Metal & Mining• Medicine• R & D• Construc on• & Many More...

Services We Provide

2

Temperature Catalog 1.800.342.5335 www.edl-inc.com3

Temperature SensorsInterchangeable Sensor System ..................................... 6Surface Sensors ......................................................... 7-12Roller Contact Sensors ............................................. 13-17Needle Sensors ........................................................ 18-21Specialty Sensors ..................................................... 22-27Mini-Grabber Clips .................................................. 28-30Sensor Accessories .................................................. 31-32

General Process Thermocouples ............................. 33-34Resistance Thermocouple Detectors ............................ 34Process Thermocouple Assembly ................................. 35

E-Z Probe Plas cs Molding Temperature Kit ....................43Pocket-Probe Plas cs Molding Temperature Kit ..............43E-Z Probe - QA & Maintenance Temperature Kit..............44E-Z Probe - Food & Beverage Temperature Kit .................44E-Z Probe - Tire & Rubber Industry Temperature Kit ........45Pocket-Probe Analog Gas & U lity Temperature Kit ........45Temperature Humidity Kit. ...............................................46

EDL’s Calibra on Services ..............................................51Infrared Calibrators ..................................................52-53T-VAL Remote Head Drywell ..........................................54Drywell & Surface Calibrators ...................................54-55Cyrogenic .......................................................................56Liquid & Salt Baths ...................................................56-58Furnaces ........................................................................58

Versa-Temp 3 RTD ........................................................ 36LT-100 Thermocouple Instrument ................................ 36 Pocket Probe Analog .................................................... 37Pocket Probe Digital ..................................................... 38Pocket Probe Digital - Extended Range ........................ 39Pocket Probe Sealed ..................................................... 40Dyna-Temp Pyrometer ................................................. 40E-Z Probe Pyrometer .................................................... 40Accutherm .................................................................... 41Mul -Zone Switches ..................................................... 42MX Temperature Controller.......................................... 47Instrument Accessories - Lugs & Clips .......................... 49Instrument Accessories - Cases .................................... 48Instrument Accessories - Switches ............................... 45

Part numbers are shown throughout the catalog in charts with the le ers or numbers bold highlighted in red. Please read from le to right within the column rows to create part number. See example below.

Terms & Condi ons ........................................................ 4Lead & Termina on ........................................................ 5

For ques ons & ordering informa on

1.800.342.3553(All prices are subject to change)

Example Part # Chart Type Temperature T/C Termina on

RL - RL - Roller Leaf 0606= 315° C(600° F)

EJKK*T

M M = Mini-plug (Digital) P = Phonoplug (Analog) C = Coilcord w/ Mini-plug L = Standard Plug U = Unterminated

Thermocouples

Temperature Instruments

Temperature Kits

Metrology Instrumenta on

Contents

Ordering Informa on

Example Part #: (see highlighted red le ers on chart)

RL- 06 K M

Type Temperature T/C Termina on

The Temperature People®

www.edl-inc.com 1.800.342.5335 Temperature Catalog4

Payments:All shipments outside of the territorial limits of the United States of America, must be prepaid. All payments must be made in USD to a US bank by credit card or electronic funds and wire transfers.

Delivery:All stated delivery dates are es mated to the best of our ability and done in good faith, but cannot be guaranteed. Once the merchandise has le our premises, EDL cannot be responsible for delays in ship-ments from the carriers.

Tooling:In accordance with the customs of the trade, all tooling, schema cs, and prototypes manufactured to customer specifi ca ons are the sole property of EDL unless agreed upon in wri ng and paid for by the purchaser.

Purchase Orders:Any terms or condi ons of any customer’s order or other document which is in addi on to or inconsistent with our company’s terms and condi ons hereof, shall not be binding on our company and shall not apply to that sale.

Purchase Order Changes:Changes, arrangements or understandings not wri en into the quo-ta on or acknowledgement shall not be binding to EDL and will not apply to the original sale.

No fi ca on:The terms and condi ons shall govern all orders fi lled pursuant to the quota on or acknowledgement unless the customer no fi es EDL in wri ng to the contrary, upon the acceptance of the quota on or acknowledgement.

Rou ng:Rou ng may be changed due to weight or size limita ons and where experience dictates that the best interest of the customer is served in having the shipment arrive in good condi on. FedEx is the standard carrier for EDL shipments and will be used unless another carrier is specifi ed at me of order.

Payments:If, in the judgment of EDL, the fi nancial condi on of the purchaser at any me does not jus fy con nuance of produc on or shipment on the terms of payment specifi ed, EDL may require full or par al payment in advance.

Customers Property:Customer’s property retained in our plant is exclusively for the cus-tomer’s account and at the customers risk.

Labor Standards:EDL cer fi es that all merchandise produced is in compliance with all applicable requirements of sec ons 6, 7, and 12 of the fair labor standards act as amended and of regula ons and orders of the United States Department of Labor issued under sec on 14, thereof. EDL is an equal opportunity employer in compliance with execu ve order no. 11246 as amended.

Shipments:All merchandise is shipped FOB Danville, VA including cost of insurance unless otherwise agreed upon, in wri ng, prior to shipment.

Taxes and Tariff s:Any sales, excise, use taxes and other taxes or other governmental charges upon produc on, sale, and/or shipments of the goods sold hereunder, now imposed by any government authority or therea er becoming eff ec ve, shall be paid by the purchaser, to the proper authority.

Cancella on:Orders are not subject to cancella on except with our wri en consent and only upon terms which will indemnify us for any and all loss or damage. A minimum restocking charge of 20% will be deducted from all credits issued for merchandise accepted for return depending on the condi on and age of item(s) returned.

Condi onal Pricing:This order will be accepted and billed at the price quoted. Quota ons not accepted within 60 days can be subject to change without no ce. Unit prices apply only to the specifi c quan ty and delivery schedule quoted. Any varia ons in quan ty specifi ed and/or rate of delivery may necessitate a revision in unit and price.

Errors in Price: Prices quoted shall be subject to correc on due to typographical or clerical errors.

Claims:All claims for shortage, damage or material defects, must be made in wri ng, within 10 days from the date of receipt of merchandise. Otherwise the claim will be forfeited. All claims must specify our invoice number and date. No merchandise may be returned without our wri en permission or verbal authoriza on, and must be given an (RA) return authoriza on number. Under no circumstances shall we be liable for consequen al damages.

Terms of Payment:Our terms are net 30 days, unless otherwise specifi ed on the invoice and agreed to in wri ng and signed. Terms are shown on the face of the quota on or acknowledgement. Accounts not paid in accordance with the specifi ed terms will be charged interest at the rate of 1 1/2% per month beginning 15 days past the due date.

All condi ons of acceptance shown on the quota on or acknowledge-ment apply. If a return is necessary, a return authoriza on number is required; please call to obtain.

A copy of the order will be issued to you. Always check the accuracy of the items listed on your order to ensure proper merchandise ship-ments. No fy EDL of any changes.

Terms and Condi ons


Termina on Code Defi ni on

1Spiral Lock Armor Cable is a 3/16” Stainless Steel shield-ing ideal for general protec on as well as RFI and EMI shielding for thermocouples and RTDs.

N

Spring Armored Cable is 0.250” diameter over fused Tefl on®stranded and twisted singles with reinforced Mini-plug and strain relief. Available for thermocouple sensors.

0Standard Cable off ers excellent protec on of thermo-couples and RTDs. Maintains durability and fl exibility in industrial applica ons.

CPVC coil cord with Mini-plug is durable and extends to 5’. Ideal for use with temperature sensors for digital instruments.

L Extender Leads are used to increase sensor lead length. They are available in any length and termina on.

5

Base Thermocouple MetalsThermocouple Type Composing Materials Body Color Temperature Range

K Chromel vs. Alumel Yellow -450° to +2500° FJ Iron vs. Constantan Black -350° to +2192° FE Chromel vs. Constantan Purple -454° to +1832° FT Copper vs. Constantan Blue -454° to +752° F

N Nicrosil vs. Nisil Orange -454° to +2372° F

Spiral Lock Armor Cable

Spring Armored Cable

Standard Cable

Extender Leads

Mini-plug(Code: M)

Our Mini-plugs are available in any thermo-couple type and low and high temperature confi gura on to suit any applica on.

Phono Plug (Code: P)

The Phonoplug is designed for use with our NMP Pocket-Probe Series Analog Pyrometers.

Our standard plugs are available in low and high temperature versions to suit any appli-ca on.

Standard Plug(Code: L)

DRT Plug (Code: R)

R-Style sensor ps are designed for use with the HDRT Holder. For both analog and digital instruments.

PVC Coil Cord w/Mini-plug

BET Plug (Code: E)

E-Style sensor ps are designed for use with the HBET Holder. Available for digital instru-ments.

Spade Lug Connectors are non-insulated connectors designed to take the heat in any applica on for any analog instrument using screw terminals.

Spade Lugs (Code: A)

Lead & Termina on Op ons


HBET holders are only compa ble with digital instruments. Holds E series sensors in a Mini-plug style plug.

6

Sensors available for the BET sensor system are des-ignated as “E” under the individual sensor termina- ons (plugs directly into instrument or can be used

with an HBET holder or ET Lead shown below).

Sensors for the RT system designated as “R” must be used with an HDRT holder.

HBET Interchangeable Sensor System

HDRT holders are compa ble with both analog & digital instru-ments. Holds R Series sensors and uses a DRT style plug.

HDRT Interchangeable Sensor System

Type Temperature T/C Termina on Price

HBET- HolderGoverned by T/C type (works with E termina on for sensors)

EJK*T

M = Mini-plug (Digital)C = Coilcord w/ Mini-plug $89.00

HDRT - HolderGoverned by T/C type(works with R termina on for sensors)

EJ K *T

M = Mini-plug (Digital)P = Phonoplug (Analog) $93.00

Specifi ca ons

HBET Holder 6” long x 0.625” diameter Stainless Steel

HDRT Holder 3” long x 0.625” diameter Stainless Steel

Lead 32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulator & twisted with overbraid

Accuracy Governed by T/C type

Response Time Governed by T/C type

Need a longer lead?

Check out our extender leads on page 32.

* Max. Temperature for T is 400° C

Holds R Series Sensors The R Series allows various sizes and types of sensors of the same thermocouple type to be used with one HDRT Holder. Look for R in the ordering charts, under the termi-na on column to see if it is available in the sensor that is being ordered.

Must use with HDRT holder only. For use with analog & digital instruments.

Holds E Series Sensors The E Series plugs directly into the instru-ment and allows various sizes and types of sensors of the same thermocouple type to be used. Look for E in the ordering charts, under the termina on column to see if it is available in the sensor that is being ordered.

When a lead is required, use a HBET Holder, extender lead, or the sensor can be used alone, plugged directly into the instrument. For use with digital instru-ments only.

* Holders are purchased separately from sensors.

EDL’s Interchangeable Sensor System is a low cost alterna- ve to our standard sensors with leads. The BET and DRT

systems are ideal for rough industrial applica ons. If a sensor breaks, only the interchangeable thermocouple p needs to be replaced – saving you me and money.

The Stainless Steel handles are polarized to accommodate diff er-ent thermocouple types, and each handle comes standard with a 32” lead with Stainless Steel overbraid.

Sensor Tips Sold Separately

Sensor Tips Sold Separately

Order Informa on - Refer to page 3 for ordering instruc ons.

EDL Interchangeable Sensor Systems


EDL’s Tefl on® Surface Sensors are similar to standard Surface Sensors and are designed to measure all fl at surfaces without any damage. These sensors deliver fast response mes as well as high ac-curacy. Tefl on® Surface Sensors are ideal for use on plas cs and coated metals as well as numerous other industrial processing applica ons where delicate material is involved.

The Tefl on® head helps reduce possible damage to the test object. Construc on consists of a self-aligning 2-coil thermocouple mounted in a Tefl on® head. The Tefl on® head is secured into a 2 ½” aluminum handle which includes a 3” plas c extension handle. These sensors are engineered for opera on up to 260° C (500° F). All EDL Surface Sensors come standard with a 32” lead with Stain-less Steel overbraid.

7


SS- StraightSS45 - 45° AngleSS90 - 90° Angle

12 = 650° C(1200° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = UnterminatedE = Mini-plug (no lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$102.00


SSA- Tefl on® Tip StraightSSA45 - Tefl on® Tip 45° AngleSSA90 - Tefl on® Tip 90° Angle

05 = 260° C(500° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = UnterminatedE = Mini-plug (no lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$122.00

Straight Surface Sensor (SS-)

2.5”

0.6”

0.5”

0.5”

0.75”

2.5”

2.5”0.75”

0.5”

45° Surface Sensor (SS45-)

90° Surface Sensor (SS90-)

Teflon® Tip Straight Surface Sensor (SSA-)

2.5” 0.6”

0.5”

0.5”

0.75”

2.5”

2.5”0.75”

0.5”

45° Teflon® Tip Surface Sensor (SSA45-)

90° Teflon® Tip Surface Sensor (SSA90-)

• Designed to measure all fl at, smooth surfaces• Two-coil design improves response me & accuracy• Rated up to 650° C (1200° F)• Ideal for use in plas cs & glass processing as well as many other applica ons• High temperature Surface Sensors rated up to 815° C (1500° F) are available • All standard Surface Sensors come with a removable 3” plas c extension handle

Specifi ca ons

Sensing Tip 0.5” diameter ceramic two-coil type

Handle 2.5” long, 0.625” diameter aluminum w/ 3.0” removable plas c extension

Lead

32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid

Accuracy ±3° C or 1% (whichever is greater)

* Max. Temperature for T is 400° C

*Max. Temperature for T is 400° C

Tefl on® p eliminates scratching or marring of delicate surfaces. Two-coil design sensing p minimizes heat loss thus increasing accuracy.

EDL Surface Sensors

EDL Tefl on® Surface Sensors

Surface Sensors (SS) are designed for measuring all fl at, smooth surfaces. These sensors deliver ex-tremely fast response mes. Straight Surface Sensors are the most popular Surface Sensors avail-able. Their construc on consists of a self-aligning 2-coil thermocouple mounted in a ceramic head.

The ceramic head is cemented into a 2 ½” aluminum handle, with a removable 3” plas c extension handle. These sensors are capable of opera on up to 650° C (1200° F). Surface Sensors are ideal for use in plas cs and glass processing as well as numerous other industrial processing applica ons. All EDL Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.


* Reference version available with cer fi cate



• Allows safe measurement of hard-to-reach areas

• Self aligning two-coil thermocouple design

• Extremely fast response time

• Different shank lengths and lead lengths available

Multi-Purpose Surface Sensor (SMP-)

Mini 90° Surface Sensor (SM90-)

6” 0.375”


SMP- Mul -Purpose Surface 12 = 650° C

(1200° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)R = Must use HDRT holder (-$5.00)E = Mini-plug (no lead) (-$23.00)

$169.00

SM90 - 90° Angle

Specifi ca onsSensing Tip 0.5” diameter ceramic two-coil type

Handle 2.5” long, 0.625” diameter aluminum

Lead32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid


Response Time < 4 seconds to 95% of reading

Specifi ca ons

SMP Tip 0.375” diameter ceramic two-coil type

SM90 Tip 0.50” diameter ceramic two-coil type

Handle 6” long x 0.375” diameter, Stainless Steel sha fully po ed


Accuracy ±3° C or 1% (whichever is greater)Response

Time < 3 seconds to 95% of reading*Max. Temperature for T is 400° C.

Two-coil design sensing p mini-mizes heat loss thus increasing accuracy.

Long Shank Surface Sensors

Mul -Purpose Surface Sensors

0.5”

6”

0.375”

6” 2.5”

1”

SLS Long Shank - Straight

6”0.625”

1”

1”

6”

SLS Long Shank - 45°

SLS Long Shank - 90°

0.5”

0.5”

2.5”

2.5”

0.625”

0.625”

0.5”

Type Temperature T/C Shank Length Termina on Price

SLS- StraightSLS45 - 45° AngleSLS90 - 90° Angle

12 = 650° C(1200° F)

EJK*T

4”6”9”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedE = Mini-plug (no lead (-$23.00)

$135.00

*Max. Temperature for T is 400° C.

EDL’s Long Shank Surface Sensors are similar to Straight Surface Sen-sors, but their reach is longer. These sensors deliver extremely fast response mes as well as high accuracy. Construc on consists of a self-aligning 2-coil thermocouple mounted in a ceramic head.

The ceramic head is cemented into a 1” aluminum housing with a 6” shank, 2.5” aluminum handle, and a 3” plas c extension handle. This allows the user to keep hands away from the monitored object. Long Shank Surface Sensors operate up to 650° C (1200° F).

All EDL Long Shank Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

EDL’s Mul -Purpose Surface Sensors are compact and versa le allowing easy access in confi ned, ght areas. These sensors feature our popular self-aligning, 2-coil thermocouple element design, mounted in a ceramic head.

The actual sensor is mounted in a Stainless Steel sleeve that is connected to a 6” Stainless Steel handle. The long handle assures a good grip for applying appropriate pressure to test objects for accurate readings. All EDL’s Mul -Purpose Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.




• Designed to minimize amount of heat removed from surface under test• Unique thermocouple strain relief loop • 4 guides align & protect band from damage• Ideal for use on flat or curved surfaces with more than a 6” radius• Comes standard with a removable 3” plastic extension handle

Mini-Versatile Surface Sensors are used in applications where there is a high potential for getting contaminants on a standard surface sensor. Injection mold temperature measurement is the best example. The Teflon® shell supports the tension on the band & minimizes the heat sink effect and allows accurate temperature measurement of areas as small as 0.5” in diameter. The Teflon® construction makes marring or damaging delicate surfaces less likely.

Mini-Versatile Surface Sensors come with a removable 3” plastic extension handle. These sensors can also be made to accommodate high temperature applications.

All EDL Versa le Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

2.5”

0.6”

0.5”

Specifi ca ons

Band 0.005” thick Stainless Steel, 0.375” wide, 0.9” across four Stainless Steel restrictors

Handle 2.5” long x 0.625” diameter double epoxy powder coated


Accuracy ±3° C or 1%, (whichever is greater)

Response Time <3 seconds to 95% of reading

Specifi ca ons

Band 0.005” thick Stainless Steel, 0.163” wide

Handle 2.5” long, 0.625” diameter aluminum double epoxy powder coated

Lead32” long thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted with Stainless Steel overbraid


Response Time < 3 seconds to 95% of reading*Max. Temperature for T is 400° C.


SVS- Versa le Surface

08 = 425° C(800° F)

12 = 650° C(1200° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)E = Mini-plug (no lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$117.00


Versa le Surface Sensors

1” 2.5”

0.9”

0.625”

Mini-Versa le Surface Sensors


SVSM- Versa le Surface

05 = 260° C(500° F)

JK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)E = Mini-plug (no lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$129.00

The Tefl on® shell supports the tension on the band & mini-mizes the heat sink eff ect.

EDL’s Versa le Surface Sensor quickly and accurately measures temperatures of any fl at or slightly curved surface with over a 6” radius. A 0.005” thick Stainless Steel band absorbs minimal heat from the test object contribu ng to fast, accurate readings. This sensor design is ideal for use on oily, greasy surfaces in industrial environments.

The Versa le Surface Sensor is easily cleaned, allow-ing reuse in even the most extreme applica ons. Four guides properly align the sensor for reliable readings as well as to protect the sensing band from damage. The sensor comes mounted in a durable 2.5” powder-coated handle.

All EDL Versa le Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.





SR - StraightSR45 - 45° AngleSR90 - 90° Angle

12= 650° C(1200° F)

EJK

M = Mini-plug (Digital)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)

$154.00

Specifi ca ons

Band 0.250” wide

Handle 2.5” long, 0.625” diameter

Lead

32” long thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted with Stainless Steel overbraid


Response Time

< 3 seconds to 95% of reading for 0.005” band

Specifi ca ons

Flexible Tube& Cap

0.007” Stainless Steel all spot welded construc on reinforced ther-mocouple junc on. 0.125” of spring loading 0.25” diameter. ± 5.0° of angular adjustment

Handle 4” long x 0.875” diameter, ergonomic closed cell foam, fully po ed, 4” Stainless Steel sha

Lead 32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid



1.45” withBand Mounted

2.5” Long0.625” Diameter

0.75”Complete Flex Band Sensor

Band Holder

Flex Band Surface Sensors

Rugged Surface Sensors

Straight Rugged (SR-)

1” 4” 4”

0.25”

2”

2.75” 4”0.25”

45 ̊Rugged (SR45-)

3”

3.25” 4”0.25”

90 ̊Rugged (SR90-)


RFC - Flex Band Sensor Holder 10 = 535° C(1000° F) E

JK

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = Unterminated

$115.00

R3R - 0.003” Band - Fastest response me R5R - 0.005” Band - StandardR7R - 0.007” Band - More durable

— $94.00

EDL’s Flex Band Surface Sensors are designed for measuring delicate fl at, concave or convex cylindrical surfaces up to 1000° F. The bands are available in three standard thicknesses: 0.003”, 0.005”, or 0.007”. These bands are made from special grade thermocouple material for delivering the highest accuracy. Because of the unique fl exibility, only light contact is necessary for the band to assume the contour of the test object. All Flex Band Surface Sensors are made with a nylon block, for heat resistance. The block is mounted to a 2.5” long powder coated aluminum handle for durable and rugged use.

All EDL Flex Band Surface Sensors are available in three band thicknesses (0.003”, 0.005”, and 0.007”) with a width of 0.25”. All bands are inter-changeable on the Flex Band Holder and allow placement of the band at any angle to the block assembly for ease of use.

All EDL’s Flex Band Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

EDL’s Rugged Surface Sensors are ideal for dirty, contaminated surfaces, or surfaces where liquid is present. These sensors feature a self-aligning spring loaded swivel head for reliable and consistent readings.

EDL’s exclusive design ensures proper contact against fl at surfaces for accurate readings. The ergonomic and comfortable foam grip handle gives added ease of use.

All EDL Rugged Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.




• May be used for both stationary or moving surface measurements; such as rotating rubber wheels or continuous flow dough lines in the food industry

• Low mass Stainless Steel leaf sen-sors allow for excellent response times & reduce surface distur-bances

• Leaf sensor is only 0.010” thick, providing fast & accurate readings

• Ideal for readings where closely mated parts must be measured

• May be used in liquid

Mini-Leaf Sensor (SML-)

2”

0.343”1.5”

0.375”

Straight Mini-Wand (SMW-)

2” 1”, 2”, or 3” 0.343”

45° Mini-Wand (SMW45-)

2”1”, 2”, or 3”

0.343”

90° Mini-Wand (SMW90-)

2”1”, 2”, or 3”

0.343” 0.312”

Type Temperature T/C Diameter Length Termina on Price

SMW - StraightSMW45 - 45° AngleSMW90 - 90° Angle

10= 535° C(1000° F)

EJK*T

K = 0.059”F = 0.072”

Other Diameters Available

1” 2”3”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)E = Mini-plug (no lead) (-$23.00)R = Must use HDRT holder (-$5.00)N = Aluminum handle w/ Mini-plug & Spring Armor Cable plus strain relief (+$30.25)

$115.00

Type Temperature T/C Width Length Termina on Price

SML - Mini Leaf

08= 425° C(800° F)

12= 650° C(1200° F)

EJK*T

A = 1/4” or 0.250G = 3/8” or 0.375 1.5”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)

$114.00

SL - Leaf

15= 815° C(1500° F)

EJK

— 3”, 6”, 9”, or 12” $210.00

*Max. Temperature for T is 400° C. | Add $2.00 per inch for shanks longer than 3”


Leaf Sensor (SL-)

2.5”6”

0.625”

0.625”

Mini-Wand Surface Sensors

Leaf Surface Sensors

Specifi ca ons

Sensing Tip 0.125” diameter alloy disk

Handle 2” long x 0.343” diameter, ceramic

Lead




EDL’s Mini-Wand Surface Sensors are ideal for use on complex dies, webs, fi ns, small holes, or slots, and many more industrial applica ons. The Mini-Wand Surface Sensors feature a small low mass heat col-lector that delivers extremely accurate readings on small, thick or low mass objects.

These sensors are available in straight, 45°, and 90° styles – with a reinforced shank for added durability. Easy to grip, the compact ceramic insulated handle gives strength and resiliency. Longer length shanks are available for hard to reach areas.

All EDL Mini-Wand Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

EDL’s Mini-Leaf Surface Sensors are ideal for use on webs, fabrics, closely spaced fi ns, slots, or any smooth fl at surface moving or sta onary.

The sensing element is designed from fl exible hard grade stainless 0.005” thin material for accurate readings while maintaining durability. Standard leaf length is 1” with longer lengths available.

The low mass assists in delivering fast, accurate readings. EDL Leaf Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

Specifi ca ons

SMLSensing Tip

0.005” x 0.375” wide fl exible Stainless Steel leaf

Handle 2” long x 0.343” diameter ceramic

SLSensing Tip

0.010” x 0.375” wide fl exible Stainless Steel leaf

Handle 2.5” long x 0.625” diameter aluminum

Lead



Time < 4 seconds to 95% of reading


Order Informa on - Refer to page 3 for ordering instruc ons


1” to 8”DiameterAvailable

0.562”Band Width

Type Temperature Diameter T/C Termina on PriceSPC-1 - Pipe Clamp

06= 315° C(600° F)

1 1/16” - 2” EJK*T

E = Mini-plug (no lead)

$53.00

SPC-2 - Pipe Clamp 2 1/16” - 3” $55.00

SPC-3 - Pipe Clamp 3 1/16” - 6” $59.00

Specifi ca ons

Clamp 1” to 8” diameter 0.562” wide

Handle No handle




Pipe Clamp Sensors

EDL Custom Temperature SensorsThe following informa on outlines and details EDL’s extensive line of base, noble metal and refractory thermocouples, thermistors, and RTDs. Here you will fi nd basic informa on on over 10,000 standard sensors plus many ideas for special sensors. Data, tech-nology, experience, and performance have been the backbone of our 70 plus year history of manufacturing quality products. Although we manufacture the largest range of standard industrial sensors of any manufacturer, we never turn away a customer because of their special or unusual requirements.

At EDL, our fl exible manufacturing system includes a nearly ver -cal manufacturing capability, and this coupled with 100% inspec- on, and a full laboratory facility enables us to make changes and

improvements quickly and easily.

All EDL sensors are hand cra ed for quality and dependability. This a en on to detail assures you the quality of our products and allows us to achieve accuracies far be er than the industry standards.

Our manufacturing capability includes the ability to produce sen-sors with virtually any type of sheath material including Stainless Steel types 301, 302, 304, 310, 316, 321, 347, Inconel, Monel, Hastalloy, and Waspalloy. We are experienced in all of the base metal, noble metal, and refractory thermocouples plus RTDs of 2.5Ω to 1,000Ω in both American and European curves, with accuracies as close as 0.01% . Typically, EDL accuracies far exceed the industry standards because of our extensive inventory of wire, directly traceable to PT67. This wire is calibrated and veri-fi ed to ITS90 through Polynomial fi t, directly in our lab.

The incredible variety of our product line is possible due in large part to our manufacturing diversity. Our modern shop encom-passes a machining facility including a complete tool and die making division, an injec on molding company, a stamping divi-sion, and quality control lab.

In our long history, we have experienced many cases where cus-tomers have found that a er switching to EDL sensors their rate of replacement was reduced by 75% of their previous rate, this is a signifi cant improvement. O en, this is due to the choice of materi-als for sensor construc on, sensor design, and me culous care in EDL’s sensor fabrica on.

You will fi nd EDL equally adept at handling a one piece special as we are at handling a contract order for 10,000 pieces. For infor-ma on on contract orders or blanket orders, please contact our sales department for specifi cs and pricing. Please call EDL sales at 434.799.0807 or 1.800.DIAL.EDL (800.342.5335), or feel free to email [email protected].

EDL’s Pipe Clamp Surface Sensors quickly a ach to any hose, tube, or pipe from 1” to 8’ in diameter. Three standard sizes are available (custom sizes to customer specifi ca ons are available). The construc on of these sensors is Stainless Steel and thermocouple grade material. The simple hose clamp design and convenient plug-in allows the user to disconnect the sensor and leave it in place for future readings. Extender leads for Pipe Clamp Sensors are sold separately.

Please call EDL sales (434.799.0807) for addi onal informa on on the diff erent lengths, termina ons, and

thermocouple types available.


Our fl exible manufacturing capabili es enable us to make

changes and improvements quickly and easily.


EDL has found a unique method of producing Roller Contact Sensors, making them more accurate and increasing the sen-sor’s life span. This gives you be er reliability in temperature measurement.

The Roller Contact consists of the base, bow springs, Stainless Steel contact band and the fi nest thermocouple wire.

Roller Contact Size Chart

Band Size For Use with Sta onary Objects

For Use with Moving Objects

2 1/2” 1/2” to 15” dia. Approx. 1/2” to 8” dia.

5” 3’ max. dia. Approx. 1 1/2’ max. dia.

12” 10’ max. dia. Approx. 5’ max. dia.

Roller Contact Sensors

Type Flat Surface

RoughSurface

CurvedSurface

MovingSurface Rugged Limited

Space Immersible

Roller ContactRC

Roller LeafRL

Roller BandRB

Flex BandRFC

Rolling RollerRWR

Mini-RollerRMR

Weld.WasherWW

Roller Contact Application Guide

Ambient to 150° C

Response to 95%of Reading

Response Times of EDL Roller SensorsThe Roller Contact Sensor is used for measuring tem-perature of moving or sta onary smooth, fl at surfaces. We off er them with or without the handle.

Standard Roller Contact Sensors are designed for spot-checking and intermi ent monitoring; they have a nylon block and a Stainless Steel band. This sensor works in ambient temperatures up to 175° C (350° F). This ambient temperature must take into account the radiated heat from the object under test. If the ambient temperature (the an cipated radiant energy) or if the sensor is to be used for long periods of me, then the block material should be phenolic. Be aware if the ambient temperature exceeds 250° C (500° F), the lead wire must be changed from the standard Tefl on®construc on.

The band on the standard Roller Contact Sensor will withstand 425° C (800° F). High temperature bands have a design limit of 650° C (1200° F) with some slight modifi ca on the range on the high temperature bands can be extended to 815° C (1500° F). At the higher temperatures the bands are annealed and may wear at an accelerated rate.

As with all surface type sensors, Roller Contact Sensors can be calibrated. They can’t be calibrated by immer-sion technique they must be tested on a calibrated reference surface.

When using a Roller Contact Sensor you don’t need to use excessive force. You should only apply enough pressure on the band so it defl ects and starts to curve around the object being tested.

When tes ng small diameter objects, make sure the object stays in the center of the band, do not push so hard that the band touches the block; this will damage the thermocouple wires on the back of the band. Always have at least 1/8” of defl ec- on in the band.


Roller Contact Sensors

• Provides speed & accuracy when measuring cylindrical surfaces• Protected thermocouples enable use on drums, rollers, pipes, hoses, tanks, tubes, etc.• Capable of measuring surface speeds up to 600 ft. per minute• Glass filled nylon block withstands temperatures up to 200° C (375° F)• Please request information for permanent installations• E & R Series sensors available

Bands are not replaceable

Band Length of 2.5”, 5”, or 12”

1.750”

1.70”

With Nylon Block

Specifi cations

Band 0.375” wide x 0.005” thick, hard Stain-less Steel

Handle 1.7” long, glass fi lled, nylon block or 2.5” long x 0.625” diameter aluminum

Length Avaliable in 2.5”, 5”, or 12”

Lead32” long thermocouple grade stranded #20 wire gauge, Teflon® insulated & twisted w/ Stainless Steel overbraid


Response Time < 2.5 seconds to 95% of reading

Type Temperature T/C Termination PriceRC2.5 - Roller Contact w/ 2.5” Band & Block

RCH2.5 - Roller Contact w/ 2.5” Band & Handle

08= 425° C(800° F)

12= 650° C(1200° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)

Available in E & R as well. See page 17.

$108.00

RC5 - Roller Contact w/ 5” Band & Block

RCH5 - Roller Contact w/ 5” Band & Handle

$112.00

RC12 - Roller Contact w/ 12” Band & Block

RCH12 - Roller Contact w/ 12” Band & Handle

$135.00

*Max. Temperature for T is 400° C, for 08 only.

Also available in E & R Series sensors and can work with holders.

See page 6 for holders & page 17 for sensor bands in E & R series.

2.5”

Band Lengths of 2.5”, 5”or 12”

With Handle

EDL’s Roller Contact Surface Sensors are extremely accurate, fast, and eff ec ve on all cylindrical surfaces. Bands are durable and allow for rapid measurement response mes. Bands are available in three standard sizes, 2.5”, 5”, and 12” to accommodate diameters from 1” to 120”. These sensors are ideal for use on rota ng or sta onary pipes, drums, tanks, hoses, and much more.

All EDL Roller Contact Surface Sensors come standard with a 32” lead with Stain-less Steel over braid.


The band height increases as the band length increases


Roller Leaf Contact Sensors

• The sensing leaf exerts minimal pressure against the object under test

• Roller Leaf Sensors includes 1 sensing leaf & removable 3” plastic extension handle

TypeT lat FlSurface

RoughSurface

CurvedSurface

MovingSurface Rugged Limited

Space Immersible

Roller ContactRC

Roller LeafRL

Roller BandRB

Flex BandRFC

Rolling RollerRWR

Mini-RollerRMR

Weld.WasherWW

Roller Contact Application Guide

1.14”

2.6”

2.5” Long Handle0.625” Diameter


1.07”

2.250”

Specifi ca ons

Band 1.625” long x 0.375” wide x 0.005” thick

Handle 1.7” long nylon block or 2.5” long x 0.625” diameter aluminum

Lead32” long thermocouple grade stranded #20 wire gauge,Teflon® insulated & twisted w/ Stainless Steel overbraid



Specifi cations

Leaf 0.375” wide x 0.005” thick

Handle 2.5” long x 0.625” diameter

Lead32” long thermocouple grade stranded #20 wire gauge, Teflon® insulated & twisted w/ Stainless Steel overbraid




RRH - Rolling Roller Block w/ 2 1/2” Handle 06= 315° C

(600° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = Unterminated

$191.00

RRB - Rolling Roller (No handle) $185.00

Kapton covering for any band – – Add K a er above codes +$15.00(add to sensor price)



RL - Roller Leaf 06= 315° C(600° F)

EJK*T


$250.00

RLR - Replacement Leaf (sensing element) — Leaf Only $77.00


Rolling Roller Contact Sensors

EDL’s Roller Leaf Surface Sensors exert very li le pressure against the item that’s temperature is being measured. This allows delicate, fast moving fl at objects to be measured precisely and without damaging the object being measured.

The leaf incorporates a latch assembly to restrict the leaf extension beyond the wheels, reducing abuse to the thermocouple element. Interchangeable and replaceable leafs may be purchased. EDL recommends some care when storing this style sensor, to prevent damage to the sensing element.

All EDL Roller Leaf Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

EDL’s Rolling Roller Contact Surface Sensors are specifi cally engineered for use on round, rota ng or sta onary surfaces. Four bearings track easily on diameters from 0.625” to 8” and act as restrictors preven ng excessive pressure to the thermocouple element.

A Stainless Steel bow supports the 0.005” band for long-term durability. A Kapton coa ng is available to further eliminate any marring or scratching on delicate cylindrical surfaces.

These sensors are available with high temperature block or handle. All EDL Rolling Roller Contact Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.

(High temperature versions are available)




Roller Band with Wheels Roller Contact Sensor• Designed for flat moving surfaces (up to 1200 fpm / 365 mpm)• Bearings are resistant to high temperature• 1 band included

Specifi ca ons

Band 0.375” wide x 0.005” thick

Handle 2.5” long x 0.625” diameter

Lead

32” long thermocouple grade stranded #20 wire gauge, Teflon® insulated & twisted w/ Stainless Steel overbraid


Time < 2 seconds to 95% of reading

Specifi ca ons

Band 0.005” thick, x 24” wide x 1.125”long, hard Stainless Steel

Handle 6.0” long x 0.375” diameter Phenolic material

Lead32” long thermocouple grade strand-ed #20 gauge wire, Teflon® insulated & twisted w/ Stainless Steel overbraid




RMR - Mini-Roller 05= 260° C(500° F)

EJK*T


$154.00

Kapton covering for any band – – Add K a er above codes +$15.00(add to sensor price)



RB - Roller Band w/ Wheels 06= 315° C(600° F)

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = UnterminatedE = Mini-plug (No lead) (-$23.00)R = Must use HDRT lead (-$5.00)

$266.00

RB - Roller Band w/Wheels 12= 650° C(1200° F) E, J, K M = Mini-plug (Digital) $295.00

RBR - Roller Replacement Band 06= 315° C(600° F)

E, J,K, *T – $69.00

RBR - Roller Replacement Band 12= 650° C(1200° F) E, J, K – $82.00


Mini-Roller Contact Sensors

1.375”6” Long Nylon Handle

0.375” Diameter

1.125.”

2.6”

1.2”


EDL’s Mini-Roller Contact Surface Sensors are ideal for applica ons such as delicate drums, copy machine rollers, prin ng rollers or any sta onary or rota ng cylinder. These sensors are designed to measure diameters of 1” or less. The replaceable Tefl on®guides permit even pressure and reduces fric on when pressed against rota ng cylinders.

A special Kapton covering may be ordered which will help to prevent marring or scoring on delicate rota ng cylinders. The guides also protect the 0.005” thick, 0.25” wide Stain-less Steel band from abuse and distor on.

All of EDL’s Mini-Roller Contact Surface Sensors come stan-dard with a 32” lead with Stainless Steel overbraid.

EDL’s Roller Band Surface Sensors are designed to work on fl at and moving surfaces. The three wheels give you more control and smoother tracking on high speed surfaces, and assure proper surface contact on the band for fast accurate temperature readings.

The bands are constructed from thick full-hard Stainless Steel – ensur-ing their durability. The bearings are resistant to high temperature, dirt, and foreign ma er. The replaceable bands, sold separately, are installed easily in just minutes.

All EDL Roller Band Surface Sensors come standard with a 32” lead with Stainless Steel overbraid.




Roller Contact Holders

2.5”

12”

5”

• Allows one holder to be used for differ-ent band sizes: Roller Contact holders will accept 2.5”, 5”, or 12” bands

• Bands are easily installed

• Holder must be same thermocouple type as the band being installed or replaced

• Available with block or handle

R Series SensorsThe R Series allows various sizes and types of sensors of the same thermocouple type to be used with one HDRT Holder. Must use with HDRT holder only. For use with analog & digital instruments.

E Series SensorsHolds E Series Sensors The E Series plugs directly into the instrument and allows various sizes and types of sensors of the same thermocouple type to be used. When a lead is required, use a HBET Holder or sensor can be used alone, plugged directly into the instrument. For use with digital instru-ments only.

Allows various size bands of the same thermocouple type to be used with one holder. For use with both analog & digital instruments.

Any size band of the same thermocouple type may be used with one holder for digital instruments only.

Specifi ca onsBand 0.005” Thick full hard Stainless Steel

Handle Nylon block 1.7”L or 2.5” Aluminum

Lead32” long thermocouple grade stranded #20 wire, Tefl on® insulated & twisted w/ Stainless Steel overbraid




RAB - Holder only w/ nylon block

RAH - Holder only w/ 2.5” handle

Selected band governs

temperature

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plug

$91.00

R2.5 - Band 2.5”08= 425° C

(800° F)

EJK*T

Band fi ts into any holder listed above.

The T/C type must be the same on band & holder.

$68.00

R5 - Band 5” $78.00

R12 - Band 12” $97.00

R2.5 - Band 2.5”12= 650° C(1200° F)

EJK

$78.00

R5 - Band 5” $88.00

R12 - Band 12” $107.00

Band Type & Size Temperature T/C Termina on PriceRC2.5 - 2.5” Band 08= 425° C (800° F)

or12= 650° C (1200° F)

EJK*T

R = Must use HDRT Holder(see p.6 for holder)

$90.00

RC5 - 5” Band $100.00

RC12 - 12” Band $117.00

Band Type & Size Temperature T/C Termina on Price

RC2.5 - 2.5” Band 08= 425° C (800° F)or

12= 650° C (1200° F)

EJK*T

E = Mini-plug (no lead)(see p.6 for holder)

$85.00

RC5 - 5” Band $95.00

RC12 - 12” Band $112.00

HDRT Holders

HBET Holders

See page 6 for ordering Holders



Refer to page 3 for ordering instruc ons.

Roller Contact Size Chart

Band SizeFor Use with

Stationary Ob-jects

For Use with Moving Objects

2 1/2” 1/2” to 15” dia. Approx. 1/2” to 8” dia.

5” 3’ max. dia. Approx. 1 1/2’ max. dia.

12” 10’ max. dia. Approx. 5’ max. dia.

Nylon Block w/ Handle

Nylon Block

E & R Series Sensors - Roller Contact Bands for Holders

Replaceable Bands


Order Informa on

Order Informa on


Needle SensorsResponse Times of EDL Needle Sensors

0.00

20.00

40.00

60.00

80.00

100.00

120.00

1 6 11 16 21 26 31 36 41 46 51 56 61 66 71..

Time (seconds)

Small Diameter Grounded Needle

3/16” Ungrounded Needle

3/16” Grounded Needle

Temperature RangeTolerances-Reference Junc on 0° C (32° F)

Standard Tolerance Special Tolerances

Thermocouple Type °C °F °C

(whichever is greater) ° F °C (whichever is greater) ° F

TJE

K or NR or S

B

0 to 3700 to 7600 to 870

0 to 12600 to 1480

870 to 1700

32 to 70032 to 140032 to 160032 to 230032 to 2700

1600 to 3100

±1 or ±0.75%±2.2 or ±0.75%±1.7 or ±0.5%

±2.2 or ±0.75%±1.5 or ±0.25%

±0.5%

*Note 2 ±0.5 or 0.4%±1.1 or 0.4%±1 or ±0.4%

±1.1 or ±0.4%±0.6 or ±0.1%

±0.25%

*Note 2

C 0 to 2315 32 to 4200 ±4.4 or 1% *Note 2

TA

EA

KA

-200 to 0-200 to 0-200 to 0

-328 to 32-328 to 32-328 to 32

±1 or ±1.5%±1.7 or ±1%±2.2 or ±2%

B

B

B

ASTM E-230-03 Tolerances on Ini al Values of EMF vs. Temperature for ThermocouplesType Designations Diameter

Fine

NREP

0.010”0.020”0.035”0.040”

Standard

TKFMQD

0.050”0.059”0.072”0.083”0.093”0.125”

Process & Inser on

VACG

0.187”0.250”

0.3125”0.375”

A Thermocouples and thermocouple materials are normally supplied to meet the tolerances specifi ed in the table for temperatures above 0 °C. The same materials, however, may not fall within the tolerances given for temperatures below °C in the second sec on of the table. If materials are required to meet the tolerances stated for temperatures below 0 °C the purchase order must so state. Selec on of materials usually will be required.

B Special tolerances for temperatures below 0 °C are diffi cult to jus fy due to limited available informa on. However, the following values for Types E and T thermocouples are suggested as a guide for discussion between purchaser and supplier.

*Note 2 – At a given temperature that is expressed in °C, the tolerance expressed in °F is 1.8 mes larger than the tolerance expressed in °C. Note that wherever applicable, percentage-based tolerances must be computed from temperatures that are expressed in °C.

EDL’s Needle Sensors have extremely fast response mes, permi ng accu-rate temperature readings in as li le as ¼ of a second. Only the fi nest grade of hypodermic Stainless Steel is used in the construc on of EDL’s sensors. For total versa lity, standard needle sensors are manufactured in many lengths and diff erent diameters to fi t your every need.

Needle sensors are off ered in three diff erent p confi gura ons; blunt, center sharp, hypodermic sharp. Each has their own special characteris cs for best func onality, depending on their use. You may choose between a full hard hypodermic grade needle material or a so Stainless Steel temper, which allows you to bend and shape the needle to fi t a desired applica on.

Blunt Needle Style ps are ideal for use in liquids, melts, or any applica on that will require penetra on into semi-so solids. All needles are available in the blunt style. Blunt needles off er the highest measuring capability up to 2500° F.

Center Sharp Needle ps are perfect for deep inser ons, usually over 6”. The center sharp p design is suggested whenever long needles must be used for inser on.

Hypodermic Sharp Needle ps are shaped to a true hypodermic sharp point. This triple edged sharpened p design is useful where easy penetra- on into semi-solid materials is essen al. Hypodermic sharp needles are

recommended for inser ons up to 6” and can operate up to 2000° F.

S0 - Stainless Steel Type 310 S1 - Stainless Steel Type 321S4 - Stainless Steel Type 304S6 - Stainless Steel Type 316I0 - Inconel Type 600I1 - Inconel Type 601I5 - Inconel Type 625

Needle Sensor Applica on Guide

Type Air Liquid DenseSolids

Semi Solids Contoured Limited

Space

Standard Needle X X X

Fine Needle NF X X X X

So Needle NS X X X X

Reinforced NR X X X X

Tapered Cone X X X

Threaded Bolt X X X

Shielded Air AM X X

Air Cage AC X X

Flexible Air AW X X

In a grounded junc on, the thermocouple junc on and stainless sheathed p are joined together. This produces a rugged, and faster response needle – suitable for liquids, solids, and gases.

In an ungrounded needle, the thermocouple is isolated from the stainless sheathed p. This is suitable if you are working in an environment with sta c, common power supplies, stray EMFs or monitoring conduc ve solu- ons. Although they are slower in response mes, they can prove to be

extremely eff ec ve in the harshest environments.

Grounded Junc on

Ungrounded Junc on


Needle Sensors

2” Long x 0.343” Diameter1/4” to 4”

Specifi ca onsSensing Tip Diameter as ordered


Lead

32” long thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted w/ Stainless Steel overbraid

Accuracy ASTM E-230 standard limits (pg. 17)




Lead32” long thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted w/ Stainless Steel overbraid

Accuracy ASTM E-230 standard limits (pg.17)


Type Temperature Junc on Alloy T/C Diameter Length Termina on Price

NB - Blunt

NC - Center Sharp

NH - Hypodermic Sharp

06= 315° C(600° F) G

orU

(add $12.00)

S4 EJK*T

T = 0.050”K = 0.059”F = 0.072”M = 0.083”Q = 0.093”

1”2”3”4”6”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog-IP)E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)F = Standard Plug (No lead) (-$12.00)

$96.00

15= 815° C(1500° F) S0


NBF - Fine Blunt

NCF - Fine Center Sharp

NHF - Fine Hypodermic Sharp

06= 315° C(600° F) G

orU

(add $12.00)

S4 EJK*T

R = 0.020”E = 0.035”P = 0.040”

1/4” to4”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = UnterminatedA = Spade Lugs (Analog)E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)F = Standard Plug (No lead) (-$12.00)

$118.00

15= 815° C(1500° F) S0

For Needles over 6” in length add $2 per inch.

For Needles over 4” in length please inquire for price.


Standard Needle Sensors

2” Long x 0.343” Diameter1” to 6”

Fine Needle Sensors

Sheathed thermocouples are similar to electric hea ng elements in construc on. Ceramic insulators are strung on wires, the sheath is drawn over the insulated wires, and then the assembly is compacted. EDL sets the highest standards in the thermocouple manufacturing industry by manufacturing only the highest quality sheathed thermocouple stock.

EDL uses the highest quality alloys. The alloys molecular structure drama cally decreases the chance of thermocouple contamina on, thus, ensuring longer life cycles and lower failure rates.

Highest compac on grade Magnesium Oxide assures the much desired insulator inertness. Inertness is crucial in thermocouple applica ons to avoid the migra on of atoms between the insulator and the thermocouple wires that may cause sensor decalibra on.

EDL junc ons are brazed or welded, unlike that of many companies who crimp their junc ons to reduce produc on costs. Brazing or welding the junc ons increases impermeability of the sheath, thus, crea ng greater confi dence in temperature measurement.

High temperature cement is used to provide a solid barrier to moisture and contamina on in the back end of the thermocouple. Sheath alloys are o en needed in diff erent types. There may be an increase in the cost of the thermocouple sensor due to the price of the sheath. Please contact our sales department for a quota on on items that are not listed in our catalog.

Standard Needle Sensors are made using a 5/16” diameter ceramic handle with a Stainless Steel insert and 32” long lead wire with Stainless Steel overbraiding for maximum durability. Standard needles use full hard hypodermic grade stainless in the needle sec on. Low temperature needles are available to monitor temperatures up to 600° F. Higher temperature needles are internally insulated with Magnesium Oxide (MgO) or Alumina packed, enabling use up to 2500° F, depending on the thermocouple type.

Fine needles are ideal for use where mul ple fast readings are required. The needle length can control penetra on depth. Complete response me is a fast ¼ of a second.





Reinforced Needle Sensors• Any needle 1” or longer, sharp or blunt, low or high temperature, may be

reinforced with a heavier gauge Stainless Steel tubing

• Various sheath & lead lengths, & diameters are available

• Available with liquid or gas tight fittings• Various sheath & lead lengths, & diameters are available

1” to 12” 2.5” Long x 0.625” Diameter


NBR - Reinforced Blunt

NCR - Reinforced Center Sharp

NHR - Reinforced Hypodermic Sharp

06= 315° C(600° F)

or

15= 815° C(1500° F)

GorU

(Add $12.00)

S4orS0

EJK*T

T = 0.050”K = 0.059”F = 0.072”

1” to6”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = Unterminated A = Spade Lugs (Analog-IP)E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)F = Standard Plug (No lead) (-$12.00)

$109.00

NBFR - Reinforced Fine Blunt

NCFR - Reinforced Fine Center Sharp

NHFR - Reinforced Fine Hypodermic Sharp

GR = 0.020”E = 0.035”P = 0.040”

1” to4”

Longer Lengths

Available


$137.00


NI - Inser on06= 315° C

(600° F)

15= 815° C(1500° F)

20 = 1090° C(2000° F)

Type E or K Only

25= 1370° C(2500° F)Type K Only

GorU

(Add $12.00)

S4orS0

EJK*T

D = 0.125”V = 0.187”A = 0.250”

4”6”8”

10”12”

Longer Lengths

Available


$105.00

NIC - Center Sharp Inser on

NIH - Hypodermic Sharp Inser on

NIR - Reinforced Inser on

$122.00C = 0.3125”G = 0.375”

(Add $12.00)

Specifi ca onsSensing Diameter As ordered





Specifi ca ons

Sensing Tip Diameter as ordered


Lead32” long thermocouple grade strand-ed #20 gauge wire, Teflon® insulated & twisted w/ Stainless Steel overbraid



Inser on sensors come with a removable 3” plas c handle



Inser on Sensors


1” to 6” 2” Long x 0.343” Diameter



Bendable Needle Sensors

• Sharp, rugged, hardened tip 55/57 RC

• Ideal for penetrating semi solids & asphalts

• Various sheath, lead lengths, & diameters are available

• Magnesium oxide insulated ther-mocouples covered with a soft annealed Stainless Steel sheath

• Accepts any bend & will follow any contour

• Manufactured in blunt style only

• Various sheath, lead lengths, & diameters are available


NS - So Bendable

15= 815° C(1500° F) G

or U

(add $12.00)

S0

EJK K = 0.059”

F = 0.072”D = 0.125”

2”4”6”8”

10”12”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = UnterminatedE = Mini-plug (No lead) (-$23.00)F = Standard Plug (No lead) (-$12.00)R = Must use HDRT holder (-$5.00)

$99.0020= 1090° C

(2000° F) E, K

25= 1370° C(2500° F) K only


NTC - Tapered Cone

06= 315° C(600° F) G S4

EJK*T

D = 0.125”V = 0.187”

2”4”6”8”

10”12”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugL = Standard PlugU = Unterminated E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)N = Reinforced Mini-plug w/ spring armor cable (+$30.25)S = Reinforced Mini-plug, Spring Armor Cable, handle, & nylon impact guard (+$47.50)

$127.0015 = 815° C

(1500° F)

G S0

J, E, K

20 = 1090° C(2000° F) K or E


Handle 2” long x 0.343” long ceramic

Lead

32” long thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted w/ Stainless Steel overbraid

Accuracy ASTM E-230 standard limits







2” Long x 0.343” Diameter

1” to 12”Sold as Straight Needle Length

Tapered Cone SensorsTapered Cone Sensor with Reinforced Handle

1” to 12” 2.5” Long x 0.625” Diameter




2” Long0.343” Diameter

6” to 12”

2.6” Long0.350” Dia. Cage

Protects Sensing Element

22

Shielded Air Sensors

3” Exposed Wire


Handle 2” long x 0.5” diameter aluminum

Lead32” Long thermocouple grade strand-ed #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid

Accuracy ASTM E-230 standard limits (p.17)

Specifi ca onsSensing Tip Wire size as ordered


Lead

32” Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid


Response Time <3 Seconds to 95% of reading

Specifi ca onsSensing Tip Wire size as ordered

Handle None

Lead



Response Time

<3.5 Seconds to 95% of reading

Type Temperature T/C Wire Gauge Length Termina on Price

AM - Shielded Air Sensor

15 = 815° C(1500° F)

E, J,K, T N = #30 2”

6”

M = Mini-plug (Digital)P = Phonoplug (Analog)U = UnterminatedA = Spade Lugs (Analog-IP)

$157.00

Type Temperature T/C Wire Gauge Length Termina on Price

AC - w/Cage 15 = 815° C(1500° F)

E, J,K, T N = #30 6”

12”

M = Mini-plug (Digital)P = Phonoplug (Analog)U = UnterminatedA = Spade Lugs (Analog-IP)

$139.00

Type Temperature T/C Termina on Lead Type Price

AW - Flexible Air w/bracket

06 = 315° C (600° F) E, J, K, *TM = Mini-plug (Digital)P = PhonoplugU = UnterminatedA = Spade Lugs (Analog-IP)

7 = Tefl on® $64.00

09 = 480° C (900° F) E, J, K 4 = Glass $70.00

12 = 650° C (1200° F) E or K 5 = Silica $80.00

22 = 1200° C (2200° F) K Q = Ceramic Fiber $110.00

Max. Temperature for T is 400° C.

Max. Temperature for T is 400° C.


Welded FineWire Junction

3.8” or 11.4”

2” Long 0.5” Diameter

Aluminum Handle

ProtectiveStainless Steel

Sleeve

2” or 6”

Shielded Air Cage Sensors

Flexible Air Sensors

EDL’s shielded air sensor is fast and easy to use. It is considered a shielded sensor because it has a sliding protec ve tube that prevents the fi ne element from being damaged. This sensor allows you to choose how much protec on is off ered versus the speed of response. This makes the Shielded Air Sensor extremely useful in almost all applica ons that involve measuring gas temperatures.

The Shielded Air Sensor allows you to work from stagnant air to high velocity air that would bend the exposed junc on if it was not protected. The sliding tube is hypodermic Stainless Steel for added strength and durability, the handle is Aluminum and the barrel is Stainless Steel. These sensors come standard with a heavy duty 32” lead with Stainless Steel over braid.

EDL’s Shielded Air Cage Sensors feature a rugged cage that totally protects the sensor from all fi eld abuse yet leaves 63% open area for an extremely fast response me. The superior airfl ow rate of this sensor enables fast accurate air/gas temperature readings in the harshest environments.

EDL’s Flexible Air Sensor with bracket is ideal for use in ovens, vents, HVAC, refrigerators, freezers, dish washers, and many other applica ons. The standard version of this sensor features tough Stainless Steel braiding on a heavy TFE Tefl on insulated wire with a convenient bracket for moun ng in place. One handy feature of this sensor is that once it is mounted in place you can then bend the exposed lead to whatever posi on is required. For temperatures above 315° C, we off er Glass, Silica, and Ceramic insula ons; please call to inquire.




Barrel



SH - Magne c12= 650° C(1200° F)

EJK*T


$272.00

SS- Replaceable surface sensor ps R $97.00


SLP - Magne c 08= 425° C(800° F) E

JK

E = Mini-plug (no lead) $173.00

ET-M-MJ-36 SS Overbraid Extender Lead w/Mini-plug 36” Lead

— — $50.00

Specifi ca ons

Sensing Tip 0.50” diameter, ceramic two-coil type

Handle 2.75” L x 0.75” diameter, Stainless Steel

Magnet 2” diameter x 1.187”, 40 lb. pull

Lead32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted w/ Stainless Steel overbraid

Accuracy ±3° or 1%, (whichever is greater)


Specifi ca ons

Sensing Tip 0.50” diameter ceramic two-coil type

Magnet 1” diameter x 1” high, 18 lb pull




Specifi ca ons

Magnet 0.75” diameter, > 5 lb. pull

Lead 32” Tefl on® twisted wire with Mini-plug

Accuracy ±2° of reading


SHL - Magne c 08= 425° C(800° F)

EJK*T


$73.00

Heavy Duty Magne c Surface Sensors

Low Profi le Magne c Surface Sensors

Small Magne c Surface Sensors

EDL’s Magne c Surface Sensors use a magnet to hold the sensor in any posi on on any fl at iron or steel surface with over 40lbs. of force! These magne c sensors are perfect for motors, machinery, coa ng lines, large drums, and mine equipment.

The Magne c Surface Sensor features our popular 2-coil thermocouple design in an easy to replace style. Useful when long intervals of monitoring are essen al without having to permanently mount the sensor in place. All EDL Magne c Surface Sensors come standard with a 32” lead with Stainless Steel over braid.

EDL’s Low Profi le Magne c Surface Sensors are ideal for use on coil coa ng lines, pain ng lines, sheet metal opera ons, oven walls, welding applica ons, and more. The Low Profi le design allows it to fi t in small spaces and reduces its mass infl uence on thin parts.

U lizing the ceramic mounted, 2-coil thermocouple design, the Low Profi le Magne c Surface Sensor delivers the utmost in value for unique, space limited applica ons. Standard with a built in mini thermocouple plug, you have your choice of extender leads for your par cular applica on. A Stainless Steel leaf spring secures the sensing element against the fl at test surface while an 18lb. pull magnet holds its posi on.

5”

• Will not alter temperature when used over long periods of time

• Eliminates permanent mounting

• Recommended for motors, machinery, mine equipment, coating lines, etc.





EDL’s Threaded Bolt Sensors are ideal for monitoring of engines, machin-ery, and many other processes. These sensors thread into a 3/16 – 24 UNC or ¼ - 20 UNC standard machine thread-hole size. Standard bolts are 1” hex head Stainless Steel. The thermocouple is internally mounted at the p of the bolt for fast, accurate readings.

The lead wire is protected with a fl exible strain relief for added durability. Standard sensors operate up to 600° F. Other styles are available for temperatures up to 1500° F. EDL’s Threaded Bolt Sensors come standard with a 32” long, 20 gauge Tefl on® insulated wire.

24

Specifi ca onsSensing Tip Stainless Steel

Handle None

Lead32” Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted

Accuracy ASTM E-230 standard limitsResponse

Time <3 Seconds to 95% of reading

Specifi ca onsWasher 0.375” Wide

Handle None

Standard Lead 55” Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted.



Specifi ca onsSensing Tip Welded Junc on

Handle None

Standard Lead 55” Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted.



Type Temperature T/C Diameter Thread Length Termina ons Lead Type Price

WBT - Threaded Bolt 06 = 315° C(600° F)

EJK*T

V = 3/16”A = 1/4”C = 5/16”G = 3/8”

10 x 241/4 x 205/6 x 183/8 x 16

1”

M = Mini-plug (Digital)P = Phonoplug (Analog)U = UnterminatedL = Standard Plug

7 = Tefl on $51.00


WW - Washer

06 = 315° C(600° F)

E, J,K, *T M = Mini-plug (Digital)

P = Phonoplug (Analog)A = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated

7 =Tefl on $48.00

09 = 480° C(900° F)

E, KJ 4 =Glass $54.00

12 = 650° C(1200° F) E, K 5 =Silica $80.00


WU - Welded Wire

06 = 315° C(600° F)

E, JK, *T

M = Mini-plug (Digital)P = Phonoplug (Analog)A = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated

7 =Tefl on $31.00

09 = 480° C(900° F)

E, K,J 4 =Glass $41.00

12 = 650° C(1200° F)

EK 5 =Silica $66.00

22 = 1200°C(2200° F) K Q =Ceramic Fiber $93.00



Threaded Bolt Sensors

Welded Washer Sensors


Welded Wire SensorsEDL’s Welded Wire Sensors are ideal for use in heated enclosures, ovens, vents, and ducts for HVAC or where simple, low cost temperature measurements are prac cal. Welded Wire Sensors are accurate, durable, and economical.

Standard Welded Wire Sensors use stranded #20 gauge thermocouple grade wire with fused Tefl on® insula on. Higher temperature styles use glass, silica, or ceramic as the insula on. The junc on is TIG welded for added strength and value. Welded Wire Sensors come with a 55” long lead wire.

EDL’s Welded Washer Sensors are perfect for use in marine, automo ve, or any bolt on applica on. These sensors can be easily ghtened under any bolt size star ng from 3/16” diameter and up. A thermally conduc ve washer with a thermocouple wire welded internally makes moun ng fast and permits con nuous monitoring of temperatures up to 1200° F (depending on style).

The Welded Washer Sensor comes standard with a 55” long, 20 gauge Tefl on® insulated wire. Smaller diameters are available on special order.





• Hard conical tip ideal for insertion into solid or semi-solid materials• Ideal for spot testing of nearly all food products• Stainless Steel construction can be easily cleaned & sanitized• High accuracy & stability due to aged platinum RTD elements• High accuracy Class A RTD element• Available in 3 or 4 wire 100 ohm configuration

Specifi ca onsSensing Tip 1/4” Diameter

Lead 2 Wire w/ 12” pigtails

Range -50° C to 100° C

RTD 100 ohms

Accuracy Available in class A or B

Termina on Supplied Unterminated

Specifi ca onsSensing Element 1 1/2” - 3” Diameter

Lead Tefl on® / Tefl on®



RTD 100 ohms


Specifi ca onsSensing Tip 0.093” Diameter, 1.25” long

Handle 2” Stainless Steel covered with polyolefi n

Lead 3 Wire with 10’ long


RTD 100 ohms



• These sensors can be configured for all environmental control systems

• Available in Brass for use in softer designs utilizing wood panels or railings

• A stainless version is available for modern architecture or where frequent wash downs are expected

• Decorative & discrete

• Uniquely designed for fast response to enhance environmental control• Sensor may be interfaced with all types of I/O cards & control units• Standard with long leads to reduce number of splices during installation• Environmental air sensors are available in RTD or thermocouple configuration

2” 1.25”

0.25”

0.25”

0.718”

0.718”

Type Resistance Curve Diameter Lead PriceRTDSSB -Stainless Steel RTD Bu on

RTDBB - Brass RTD Bu on

1 = 100 ohms10 = 1000 ohms

8 = 0.003859 = 0.00392 0.406”

2W = 2 Wire3W = 3 Wire4W = 4 Wire

$81.00

RT-INSRT - Plas c Installa on Tool (Installa on tool is free with order of 10 or more Sensors) $18.00

Type Resistance Curve Lead Lead Length Price

RTAES - AIr Sensor 1 = 100 ohms10 = 1000 ohms

8 = 0.003859 = 0.00392


30’ $202.00

50’ $230.00

100’ $300.00

Type Resistance Range Diameter Curve Length Lead Price

RTNCS - RTD Needle 1 = 100 ohms 6 = 315° C(600° F)

Q = 0.093”D = 0.125”V = 0.187”A = 0.250”

8 = 0.003859 = 0.00392 1.25”


$120.00

00

Stainless Steel RTD Bu on

Brass RTD Bu on

RTD Bu on Sensors

RTD Environmental Air Sensors Sealed & ideally suited for wash down environments

such as food preparation or hatcheries

4.25”

RTD Center Sharp Needle




EDL’s Environmental Air Sensor is the perfect solu on for cri -cal monitoring applica ons such as laboratories, refrigerated areas, incubators, and hatcheries. The RTD sensor is located inside of a cage with a high open area for fast response. A small plas c or Stainless Steel moun ng base can easily be affi xed to walls or ceilings in either a ver cal or horizontal posi on.

The sensor’s high accuracy and fast response me help to improve environmental control and monitoring. The sensing element is sealed and embedded in a Stainless Steel tube so the sensor may be used in wash down applica ons. The shield protects the element while allowing suffi cient airfl ow for an accurate reading. It is available with extended lead lengths so that no line splicing is required.


• Ideal for etching, plating, & chemical cleaning tanks

• Sensors clean easily & most materials will not stick to the PFA Coating

• Precision limit material in Type K, J, or E thermocouples

• Available as standard thermocouple sensor or RTD upon request

2” - 12”2.5”

Specifi ca onsHandle 2.5”L 0.625” Diameter

Lead



Accuracy ASTM E-230 standard limits

Specifi ca onsSensing Tip Kapton

Handle none

Lead 32” Long thermocouple grade Tefl on® zip wire


Accuracy 1%

Specifi ca onsSensing Tip Thermocouple material

Handle 2 1/2” Powder coated aluminum

Lead32” Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid


Accuracy 1%

Type Temperature Junc on Alloy T/C Nominal Diameter Length Termina on Price

NIA - Blunt Tefl on® Coated Needle

05 = 260° C(500° F) U S4

EJK*T

D = 0.125”V = 0.187”A = 0.250”

Other Diameters Available

2” - 12”

Longer Lengths

Available

M = Mini-plug (Digital)P = Phonoplug (Analog)A = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$142.00

Type Temperature T/C Wire Gauge Termina on Price

WADK - Kapton Tape04 = 200° C

(400° F)

EJK*T

N = 30G M = Mini-plug (Digital)

$146.005/Pack

Type Temperature T/C Length Termina on Price

SHP - Heavy Duty Prong

15 = 815° C(1500° F)

EJK

1”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated E = Mini-plug (No lead) (-$23.00)R = Must use HDRT holder (-$5.00)

$117.00

RHP - Replacement Prongs

EJK

1” — $14.00

3” — $19.00

6” — $21.00

More diameters & lengths are available - Call for pricing! *Max. Temperature for T is 400° C.


PFA Tefl on® Chemical Inser on Needle Sensors

PFA (Teflon®) coating resists most acids & alkali solutions

Self-Adhesive Thermocouple

Heavy Duty Prong Sensor

Self-Adhesive Thermocouples u lize a high strength Tefl on® or Kapton tape material with a high temperature silicone based adhesive. Within this tape is embedded a #36 gauge fi ne wire thermocouple. The fi ne gauge thermocouple provides excellent sensi vity and extremely fast response mes. These sensors are available in all thermocouple types and may be ordered with all types of standard termina ons. In addi on, custom lengths may be ordered. Extension cable may also be used to facilitate connec ng transmi ers and control panels as well as local monitoring. The Self-Adhesive Thermocouple may be trimmed to suit your par cular applica on. EDL’s Self-Adhesive Thermocouples are packaged in a quan ty of 5 to a box and are op onally available with traceable calibra on cer fi ca on. These sensors come standard with a 32” Tefl on® Zip Lead. 2”

EDL’s Heavy Duty Prong Sensors are engineered to give fast accurate readings on rough, uneven metal surfaces. The two fi xed heavy duty 1”, 3”, or 6” long replace-able prongs are center sharpened for posi ve contact into any metal surface. The prongs are mounted into a high temperature block with a 2.5” powder coated alu-minum handle for secure grip allowing fi rm pressure against the object under test.

Prongs are easily replaced and may be re-sharpened as needed. All EDL Heavy Duty Prong Sensors come standard with a 32” lead with Stainless Steel over braid.




2” 0.75” 1”, 3” or 6”



Specifi ca onsSensing Element 1 1/2” or 3” Diameter

Lead

32” Long thermocouple grade stranded #20 gauge wire, Tef-lon® insulated & twisted with Stainless Steel overbraid


Accuracy 1%

Shank Length 6”

Specifi ca onsSensing Element 1 1/2” - 3” Diameter

Lead

10’ Long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted with Stainless Steel overbraid

Range -100° C to 250° C

Accuracy 1%

Specifi ca onsLead #24 glass/glass, 32”long


Accuracy 1%

Type Temperature T/C Diameter Termina on Price

SPM - Platen Surface Sensor

10 = 500° C(1000° F)

EJK*T

1 1/2”3”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated E = Mini-plug (No lead)R = Must use HDRT holder

$215.00

Type Temperature T/C Diameter Termina on Price

NBW - Weighted Fluid Sensor

05 = 250° C(500° F)

EJK*T

A = 0.250”

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated

$170.00


SMSL - Mini-Spade Lug 09 = 480° C(900° F)

KJ

M = Mini-plug (Digital)U = Unterminated $58.00

• Platens & press plates can be closed & their surface temperature measured using this sensor

• Spring loaded sensing element

• Will withstand 20,000 psi of clamping pressure

• Platens or press plates may be closed to 3/8”

• All Stainless Steel rugged construction

• Sensor will sink in most fluid

• For tanks, drums & other liquid vessels

• Stainless Steel & Teflon® construction is durable & easy to clean

• Sensing tip is tapered to maintain accuracy & response time

• Teflon® coating available upon request

• Small footprint & low mass makes it ideal for tight applications

• Easily installed using a #2 to #6 screw

• Thermocouple junction brazed to lug

• Front of spade lug may be formed for angled or curved installation

6”1.5” or 3”

2” 1”

0.089” Diameter Hole



Platen Surface Sensor

Weighted Fluid Sensor

Mini-Spade Lug Sensor





RTD Mini-Grabber Clips provide a con nuous connec on from bare wires to the measuring instrument without a aching plugs and eliminates the need to use copper connec ons. EDL’s connectors save me and improves accuracy and effi ciency of your measurement applica on.

RTD Mini-Grabber Clips

Type Wires Lead Type Lead Length Termina on Price

MG - RTD Mini-Grabber Clips

R3 = 3 wireC = Coil CordT = TFE-TFE

1- 1’ extends to 5’3- 32”’ extends to 15’

(add $30.00)

M = Mini-plug (Digital)J = Mini-jackB = Banana PlugL = Standard Plug **

$92.00

R4 = 4 wire U = UnterminatedB = Banana Plug $112.00

- RTD material from the p to the Banana Plug- Available with convenient coil cords- Allows fast connec ons to bare RTD wires- Eliminates mul ple cold-end junc ons- 3 or 4 wire copper/copper

RTD Mini-Grabber Aligator Clips

Length: 3.3”Width: 0.5”Jaw width at p: 0.218”Maximum opening: 0.25”Coil cords: 1 or 3 feet

- Ideal for transmi er connec ons- Wide opening jaw- Available with convenient coil cords- Ideal for connec ng wires inside process connec on heads- 3 or 4 wire copper/copper

Type Wires Lead Type Lead Length Termina on Price

MGA - RTD Mini-Grabber Alligator

R3 = 3 wireC = Coil CordT = TFE-TFE

1- 1’ extends to 5’3- 32”’ extends to 15’

(add $30.00)

M = Mini-plug (Digital)J = Mini-jackB = Banana PlugL = Standard Plug **

$128.00

R4 = 4 wire U = UnterminatedB = Banana Plug $144.00

*Add to base price: $30.00 for 32” lead length ** Add to base price: $12.00 for L (standard plug)

*Add to base price: $30.00 for 32” lead length ** Add to base price: $12.00 for L (standard plug)




Thermocouple compensated Mini-Grabbers provide a con nu-ous thermocouple connec on from bare wires to the measur-ing instrument without a aching plugs.

These connectors will save me and improve the accuracy of your measurement. Stop making thermocouple measurements with copper connec ons!

• Thermocouple material from the tip to the Mini-plug

• Available with convenient coil cords • Available in all ASTM thermocouple types

• Allows fast simple connections to bare thermocouple wires

• Ideal for connecting thermocouple wires inside process connection heads

• Recommended for use with EDL’s High Precision Thermocouple Reference Instrument — LT-100 (page 36).

• Eliminates multiple cold end junctions

• Also available in copper/copper

Thermocouple Type K Thermocouple Type J

Thermocouple Type T

Thermocouple Type E

Uncompensated Cu/CuCopper/Copper

Thermocouple Type N

MG – – – –K C 1 M

TC Type – Lead Type – Lead Length – Termination

EDL Mini-Grabbers are ordered by part #. The numbering system listed below is designed so you can easily iden fy the thermocouple type, lead type, lead length, & termina on.

Mini-Grabber Part # ExampleMini-Grabber – Type K – Coil Cord – 1’ Lead – w/ Mini-plug Termina on

Type T/C Lead Type Lead Length Termination Price

MG - Thermocouple Mini-Grabber

*E J K*T

CUC = Coil CordT = TFE/TFE

1 = 1’ & extends to 5’3 = 32” & extends to 15’

(Add $30.00)

M = Mini-plug (Digital) J = Mini-jack L = Standard Plug

(Add $12.00) U = Unterminated

$77.00

R S

$89.00

*N $127.00

SET $308.00

Order Informa on

Available individually or as base metal complete set. Set includes types K, J, T, & E.

Part# MG-SET-C-1-M$308.00

Available As A Set:

Types Available:

Max. Temperature for T is 400° C.*E & N is available only in 1’ lead

Thermocouple Mini-Grabber Clips

www.edl-inc.com 1.800.342.5335 Temperature Catalog 30

• Thermocouple material from the tip to the teeth• Available with convenient coil cords• Available in all ASTM thermocouple types• Allows fast simple connections to bare thermocouple wires• Ideal for connecting thermocouple wires inside process connection heads• Recommended for use with EDL’s High Precision Thermocouple Reference Instrument — LT-100 (page 36).• Eliminates multiple cold end junctions• Also available in copper/copper

Specifi cations

Length 3.3”

Width 0.5”

Jaw Width (At Tip) 0.218”

Maximum Opening 0.25”

Coil Cords 1 & 3 Feet

Thermocouple compensated alligator clips provide the perfect solu on for making temperature measurements via terminal strips and screw head connec ons.

These clips will not add an addi onal junc on; they are thermo-couple material from the p back to the plug. They are available in all base metal thermocouple types and in uncompensated versions for other connec ons.

Alligator Clips may be purchased with coils cords and your choice of termina on. All of the clips open a full 0.25” making them suitable for binding posts, screw heads or large diameter wire.

Add confi dence to your thermocouple measurements by using compensated leads. See our Thermocouple Mini-Grabbers for smaller wires and screws (p.23).

EDL Thermocouple Mini-Grabber Alligator Clips are ordered by part #. The numbering system listed below is designed so you can easily iden fy the thermocouple type, lead type, lead length, & termina on.

Mini-Grabber Alligator Clips Part # ExampleMini-Grabber Alligator – Type K – Coil Cord – 1’ Lead – w/ Mini-plug Termina on

Available individually or as base metal complete set. Set includes types K, J, T, & E.

Part# MGA-SET-C-1-M$424.00

Available As A Set

Order Informa on

MGA – – – –K C 1 M

Mini-Grabber Alligator–TC Type – Lead Type – Lead Length – Termination

Type T/C Lead Type Lead Length Termination Price

MGA - Thermocouple Mini-Grabber Alligator

J K*E*T

CUC = Coil CordT = TFE/TFE

1 = 1’ & extends to 5’**3 = 32” & extends to 15’

(Add $30.00)

M = Mini-plug (Digital) J = Mini-jack ***L = Standard Plug

(Add $12.00) U = Unterminated

$106.00

R S

$119.00

*N $157.00

SET $424.00

*E & N is available only in 1’ lead length

Thermocouple Mini-Grabber Aligator Clips


Specifi ca ons

Opera ng Temperature Max. 121° C (250° F)

Lead32” long thermocouple grade stranded #20 gauge wire, Tefl on® insulated & twisted w/ Stainless Steel overbraid

• For use with #20 to #36 gauge wire

• A spring loaded compensated clip-on connection

• Versatile holder for fast & easy connection of fine wire thermocouples

• Jaws are color coded & lined with thermocouple material

These inexpensive thermocouples are great for measuring the temperature of air, liquids, and surfaces of very small mass. All fi ne wire thermocouples have welded junc ons to assure reliable accurate readings. They are easy to replace and may be used with a variety of holders or fastened to the input source for a readout. Wires are color coded for easy iden fi ca on. Diff erent insula ons are available depending on the applica on. Complete response may take a few seconds depending on the object under test and the method of measurement.

Bare

The

rmoc

oupl

e W

ire

Tefl o

n®co

vere

d Th

erm

ocou

ple

Wire

Tefl o

n®Zi

p Co

vere

d Th

erm

ocou

ple

Wire

Glas

s Cov

ered

The

rmoc

oupl

e W

ire

Type T/C Price

TA-M-LLJ- Miniature plug to long life jackTA-MJ-L- Miniature jack to standard plugTA-M-LJ- Miniature plug to standard jack

EJK*T

$49.00

Type Temperature Wire Gauge T/C Length Price

WRFT - Tefl on® Covered

260° C (500° F)

L = #26N = #30

EJK*T

6”12”24”

$25.00$31.00$36.00

WRFZ - Tefl on® Zip Covered

6”12”24”

$29.00$37.00$43.00

WRFG - Glass Covered 425° C (800° F)

6”12”24”

$48.00$57.00$63.00

WRFU - Bare 815° C (1500° F)6”

12”24”

$19.00$24.00$28.00

EDL color-coded thermocouple termina on (color indicates thermocouple) type adaptors allow you to change a sensor’s termina on. If, for example, you have a sensor from an EDL analog instrument which has a long life plug termina on, you can adapt the sensor to plug into a digital instrument – u lizing our miniature plug to long life jack adapter. They must be the same thermocouple type.

• Miniature plug to standard jack• Standard plug for process control industry

Type E

• Miniature plug to long life jack• Analog sensor to digital instrument

Type J,K,&T

•Standard plug to miniature jack• Standard plug for heavy duty industryType J,K,&T

TA-M-LLJ

TA-MJ-L

TA-M-LJ



Refer to page 3 for ordering instruc ons.

Type T/C Termina on Price

HDC - Delta Clamp

EJK*T

M = Mini-plug (Digital)P = Phonoplug (Analog)C = Coilcord w/ Mini-plugA = Spade Lugs (Analog-IP)L = Standard PlugU = Unterminated

$196.00

Sensor Accessories - Delta Clamp

Precalibrated Replaceable Fine Wire Thermocouples

Sensor Accessories - Termina on Adaptors





Type T/C Termina ons Price

ET-M-MJ-36- Mini-plug extender lead

JKE

*T

Mini-plug- 36” length #20 gauge T/C wire w/SS overbraid & Mini-jack to Mini-plug connected by 36” length T/C grade wire w/ SS overbraid with T/C grade designa on at end. (E - digital only) $56.00

ET-M-MJ-1FTC- 1’ Coil Cord extender lead JK*T

Coil Cord - comes in 1’, 2’, and 3’. PVC coated coil cord adapter cable with Mini-plug to mini-jack. 1’ coil extends to 5’, 2’ coil extends to 10’ and 3’ coil extends to 15’. Great for short and long extensions. Call for details on 1’ & 2’ in T/C Type E.

$57.00

ET-M-MJ-2FTC- 2’ Coil Cord extender lead $73.00

ET-M-MJ-3FTC- 3’ Coil Cord extender lead $100.00

HUD-RCA & HUD-SA AttachmentsType Descriptions Price

HUD-SA Fits sensor handles with a 0.625” diameter $98.00

HUD-RCA Fits roller contact sensors with a nylon block $77.00

Extension Handle A achmentType Size Descrip on Price

HUD-GXT-12 12”Stainless Steel

Extension A achment(Will not work without the Universal Handle)

$54.00

HUD-GXT-24 24” $70.00

HUD-GXT-48 48” $96.00

HUD-GXT-72 72” $129.00

Universal HandleType Size Descrip on Price

HUD-12 12”Stainless Steel Universal Handle

w/Foam Grip(Required for use with allExtension A achments)

$68.00

HUD-24 24” $87.00

HUD-48 48” $121.00

HUD-72 72” $165.00

• Designed for use with Surface or Roller Contact Surface Sensors• Handle is strong & lightweight• Standard Universal Handle is 12” long & 0.625” diameter• Each extension is supplied with locking pins• Attach sections as needed• Handles available in one-piece fabrications

Used to mount any sensor that has a 0.625” diameter handle. The HUD-SA attachment & universal handle allow the user to reach difficult areas safely in test applications. The sensor may be positioned at any angle.

Used to mount Roller Contact Sensors. The HUD-RCA attachment & universal handle allows the user to reach difficult areas safely during

testing. The sensor may be positioned at any angle.

• We recommend 18” of additional lead length for each 12” extension piece used for maximum flexibility

• Instead of ordering additional sensor lengths, you may elect to use an Extender Lead (ET) of the proper length to attach to your standard sensor

• Leads available in thermocouple grade stranded #20 gauge wire, Teflon® insulated & twisted with Stainless Steel overbraid or in PVC coil cord that extends out from the set length.

Extension Handle Attachment

HUD-GXT-12” to GXT-72”

HUD-RCA Attachment

HUD-SA Attachment

Add $3.00 for each additional 12” lead length to the cost of the sensor when ordering Standard Leads or Extender Leads.

Mini-plug SS OverbraidExtender Lead

Mini-plug Coil Cord Extender Lead

Sensor Accessories - Extension Handles

Sensor Accessories - Extender Leads



EDL’s extension handles are constructed from Stainless Steel and feature a comfortable foam grip. The handles are standard 12” long (addi onal lengths are available) with 5/8” diameter. The extension handles allow the user to add any addi onal length Stainless Steel sec ons from 12” to 6’ long. The addi onal extensions are available in 12” sec ons with locking pins or specifi ed for one piece fabrica on.

Each a achment has an integral swivel joint that allows the posi oning of a sensor at any angle. EDL extension handles are strong and lightweight, designed for use with Surface or Roller Contact Sensors. The sensors are coupled to the handle via the SA and RCA a achments.

Note: When adding handles and extensions to sensors, we recommend ordering longer lead lengths on sensors or the use of sensor extension leads.



Universal Handle

HUD-12” to HUD-72”


EDL’s Process Thermocouples are ideal for general and specifi c process and laboratory applica ons.

They are available in K, J, *T, E, R, S and N thermocouple types.

Type T/C Junc on Sheath Diameter Length Price

PTC - Process Thermocouple

*TEJK

G S0 = 310SSI0 = Inconel

V = 3/16 2”4”6”

$40.00

A = 1/4G = 3/8 $50.00

High Temperature Thermocouples: 0° - 1480° C (32° - 2700° F)

V = 3/16A = 1/4 Dia.

G

R - Pla num & 13% Rhodium, Pure Pla num

S - Pla num & 10% Rhodium, Pure Pla num

2”4”6”

$240.00

G = 3/8 Dia. $260.00

Type T/C Junc on Sheath 304SS NPT Diameter Length Price

PTCS - Screw in Thermocouple

*TEJK

G S0 = 310SS

4 = 1/46 = 3/88 = 1/2

12 = 3/4

V = 3/16 2”4”6”

$70.00

A = 1/4 $75.00

G = 3/8 $85.00

For Lengths Over Six Inches:1/8, 3/16, 1/4 Diameter add $0.50 per Inch

High Temperature Thermocouples: 0° - 1480° C (32° - 2700° F)

V = 3/16A = 1/4 Dia. G

R - Pla num & 13% Rhodium, Pure Pla num

S - Pla num & 10% Rhodium, Pure Pla num

2”4”6”

$275.00

G = 3/8 Dia. $300.00



Process Thermocouple (PTC)

Screw-In Thermocouples (PTCS)

0.75” Exposed

0.75” Exposed

General Process - Weld Pad Thermocouples (IB)• Designed for use in chemical, petroleum, water plants, & power houses

• Ideal for process control applications such as monitoring the temperature of furnaces & boiler tube skins

• Built to customer’s specifications

• Ideal for preventative analysis, as it is effective in determining errors & tube skin fatigue

On Request




Type T/C Junc on Sheath Diameter Length Price

IB - Bayonet Thermocouple

*TEJK

G S0 = 310SS

D = 1/8 2”4”6”

$75.00

V = 3/16 $78.00

A = 1/4 $83.00


Bayonet Thermocouples (IB)

Type OHMS @ 0° C Alpha Ω/° C Wire Sheath Diameter Length Price

IPRT - Process RTD 1 = 100 OHMS E = 0.00385234

S4 = 304SSS6 = 316SS

V = 3/16A = 1/4

2”4”6”

$105.00

Resistance Temperature Detectors

Type OHMS @ 0° C Alpha Ω/° C Wire Sheath Diameter Length Price

IPRTS - Screw in RTD 1 = 100 OHMS E = 0.00385234

S4 = 304SSS6 =

316SS

V = 3/16A = 1/4

2”4”6”

$125.00

Screw-In RTD (IPRTS)

Process RTD (IPRT)

Bayonet Style Sensors allow you to quickly and easily lock the sensor in place. The spring-loaded cap secures the sensor in the well for in mate contact, which delivers the most accurate temperature readings. The Bayonet System permits easy moun ng, sensor replacement, and retrofi ng on exis ng equipment.

The Bayonet Style Sensor comes standard with 24” unterminated Stainless Steel over braid over glass or 1” terminated spiral lock over glass. Base price includes standard lengths up to 6” and standard diameters (0.125”, 0.187”, and 0.250”). Addi onal sizes are available, please call to inquire.

Industrial RTD’s are typically made in a 3-wire design. This design allows the readout instrument to perform lead compensa on. Simple 2-wire designs are available, but they tend to give you less accuracy, because of lead resistance error, unless you are using short leads or high resistance elements. 4-wire designs give you the highest accuracy, because they allow for highly accurate lead compensa- on.

RTD sensors are produced in almost every style of sensor that a thermocouple sensor is available. Typically, they have a slightly slower response me and may tend to be larger. However, their advantage is their long-term repeatability.


Order Informa on - Refer to page 3 for ordering instruc ons.The advantages of RTDs include stable output for long periods of me, ease of recalibra on and accurate readings over rela vely narrow temperature spans.

Screw-in RTD’s are designed for easy instal-la on in indutrial and commercial environ-ments and may be mounted on machines, against process pipes, or embedded directly into a machined part.



• Nema 4 rated indoor/outdoor non-hazardous use

• Screw-top seal design for easy access & closure• Nitrile rubber gasket (rated to 750°F)

Type Descrip on PriceEHH-HDAL3/4-1/8 Aluminum Head, 3/4 NPT Conduit, 1/8 Process $30.00

EHH-HDAL3/4-1/2 Aluminum Head, 3/4 NPT Conduit, 1/2 Process $25.00

EHH-HDAL3/4-3/4 Aluminum Head, 3/4 NPT Conduit, 3/4 Process $25.00

Type Descrip on PriceEHH-HD-ALH1/8 Aluminum Head, Hinged 1/8 x 3/4 NPT $24.00

EHH-HD-ALH1/2 Aluminum Head, Hinged 1/2 x 3/4 NPT $21.00

EHH-HD-ALH3/4 Aluminum Head, Hinged 3/4 x 3/4 NPT $21.00

Type Descrip on PriceEHT-BLC/SH-2T DIN 2 Terminal Block w/ Solder Hooks $25.00

EHT-BLC/SH-4T DIN 4 Terminal Block w/ Solder Hooks $32.00

EHT-BLC/SH-6T DIN 6 Terminal Block w/ Solder Hooks $40.00

EHH-HD-ALH1/2XH Aluminum Head for Spring Mount Terminal Block $30.00

For process control, heavy industrial use & long lead lengths• Convert the low-level sensor output to an amplified signal to reduce electrical disturbance• Convert the nonlinear sensor output to a linear temperature output. This will allow for the use of standard instruments & PLCs & DCSs• Improve the safety of the temperature measurement by allowing the transmitter to supervise sensor leads• Transmitters compensate for sensor errors improving the accuracy of the temperature measurement

Call our sales team for price quote - 1.800.342.5335

Die-Cast Aluminum Heads

Terminal Blocks

Die-Cast Aluminum Heads

Spring-Loaded Terminal Blocks

Duplex or Triplex Terminal Blocks

Hinged Terminal Connec on Heads

Transmi ersDIN-Rail and In-Head Transmi ers

• Nema 4 rated• Convient flip-top design • Stainless Steel hinge pins & latches• Silicon gasket (rated to 600°F)• Available: polypropylene continuous

(rated to 198°F)• 3/4” NPT conduit port size



Order Informa on - Refer to page 3 for ordering instruc ons. Order Informa on - Refer to page 3 for ordering instruc ons.

Type Descrip on PriceEHB-BLS Single Block $6.00

EHB-BLD-4T Duplex Block - 4 Terminals $12.00

EHB-BLT-3T Triplex Block - 3 Terminals $8.00



EHB-BLT-6TSS Triplex Block - 6 Terminals, Stainless Steel $27.00


For Automotive, Chemical, Food Industry, Paper & Pulp Applications

• 4-1/2” Digit LCD display• Switchable between temperature/resistance tables

(Pt385 for European curve and Pt3926 for American curve) • Over range display feature • Auto power off feature if inactive for more than 30 minutes• Dual input allows for T1-T2 calculation automatically

Model Input Temperature Range Price

VT-3 RTD Pt385 (100 ohms) -200° C to 800° C (-328° F to 1472° F)Pt3926 (100 ohms) -200° C to 630° C (-328° F to 1166° F) $225.00

Specifi ca ons

Accuracy 2° C (0.4° F)

Resolu on 0.1° C (0.2° F)

Display Mul func onal LCD

Ba ery 9 Volt

Input Connector 3 Wire RTD

Dimensions 7.5” x 3.5” x 2”

Weight 454 (16oz)

Versa-Temp 3 - Portable Dual Input RTD

Order Informa on - Refer to page 3 for ordering instruc-

LT-100 Thermocouple Reference Meter

Model T/C Type Channels T/C Inputs PriceLT-100 All TC Types 2 Channels Mini-plug CALL

Specifi ca ons

Thermocouple Types K, J, E, T, R, S, B, N, & C

Range Of Display Full Range Each TCSize 4.4” x 7.5” x 1.25”Weight 340g (12oz)Accuracy ± 0.1° CResolu on User Selectable 1, 0.1, 0.01A/D 24 Bit Resolu onBackligh ng LED PanelReadout mV, K, ° C, ° FPower 9V Ba ery or AC AdapterUpdate 3 HZOpera on 0° to 50° C

Ba ery Life 50 Hours Con nuous Opera on (No Backligh ng)

Input - 2 Channels Uncompensated Mini TC Jacks2 Channels Minimum, Maximum, & Diff erenceInterface RS-232Character Height 1/2”

Fast & Easy Data TransmissionRS-232 transmission of temperature readings is provided with a time stamp and thermocouple type. Connection is made through Microsoft Windows standard communication software “Hyper Terminal”, or suitable RS-232 communication software, and a stan-dard PC serial port. USB/Serial port adapters are available for PCs without a standard serial port for $19.95.

Our 2-channel LT-100 Thermocouple Reference Meter, was re-designed to be hand-held and totally user friendly. This unit provides the most accurate high precision temperature measurements available in its class. The LT-100 uses a 24 bit A/D and a microprocessor for high precision temperature measurements and conversions.

EDL’s new thermocouple reference meter incorporates features previously found in much higher priced bench or rack mounted instruments but all at aff ordable EDL prices that are backed by the trusted EDL name.

A precision cold end reference junc on was incorporated into the design to accurately compensate for changes in ambient temperature and to keep the instrument func oning at its highest accuracy at all mes. When utmost accuracy is required, the internal electronic cold end reference can be set to

external, for use with an ice bath giving you enhanced stability.

Fast and easy data transmission is easily accomplished through the use of the RS-232 interface. Transmission of temperature readings is provided with a me stamp and thermocouple type. EDL’s LT-100 uses a 9V ba ery or a simple wall adapter for long term measurements. A single 9V ba ery will power the instrument for over 50 hours.



Model Temperature Code Temperature Range Degrees Per Division Price

NMP

0206101552566065

-50° to 300° F0° to 600° F0° to 1000° F0° to 1500° F-50° to 300° F (-50 to 150° C)0° to 600° F (-20 to 320° C)0° to 1000° F (-20° to 550° C)0° to 1500° F (-20 to 820° C)

5° F10° F20° F20° F 5° F (2.5° C)10° F (5° C) 20° F (10° C)20° F (10° C)

$375.00

DW Glass Window Display (Part # example: NMP-DW-06) $90.00

CC-NMP Black Cordura Carrying Case $25.00

Applications include Fuel, Nuclear, Shipping Vessels, Gas, & Electric (Utilities)

• Red-Knife pointer for easy readability• Spring-cushioned jewels absorb shock• Portable for mobile or bench top applications• Large, easy to read scale• Automatically adjusts to changes in ambient temperatures• Automatic transit switch • 1-year warranty

Specifi ca ons

Accuracy 1/2% (0.5%) of reading

Scale 87mm (3.5”)

Magnet Aged high fl ux Alnico

Open Sensor Indica on Room temperature

Thermocouple Type Type E, Phonoplug (P)

Case ABS Nylon Alloy

Dimensions 5.75” x 3.9” x 2.2”

Weight 616g (22.0 oz.)

EDL’s Metrology Laboratory will supply any sensor and instrument complete with a report of calibration that is traceable to NIST, contact us for current pricing!

NIST Report of Calibration

Pocket-Probe Analog Pyrometer


EDL’s Pocket-Probe Analog Pyrometers were developed in the 1960’s. These long me trusted pyrometers are dependable, compact, and portable temperature measuring instruments for industrial and laboratory use. EDL engineered an exclusive bi-metal and thermistor compensa on network to automa cally adjust for changes in room temperatures. This innova on dis nguished the Pocket-Probe as the industry stan-dard. Pocket-Probe Analog pyrometers require no ba eries for opera on, thus elimina ng poten al sparks. This feature makes these instruments ideal for explosion hazard areas where fumes and gases may pose a poten al safety issue. Unlike digital displays, you can visually track readings as they increase or decrease. Analog meters are not aff ected by RF noise and other electrical interference making these instruments im-mune to any adverse eff ects to readability and accuracy.

Today, the rugged Pocket-Probe Analog Pyrometer s ll off ers unmatched performance for reliability and ac-curacy. All meter movements are hand assembled by experienced cra smen. All of EDL’s instruments are constructed with only the fi nest components to ensure years of reliable service. The Pocket-Probe Analog Pyrometer is backed by an uncondi onal one year guarantee.

Op ons for Pocket-Probe Analog Pyrometers: • Glass Display Window Op on

Kits are available (page 45).


Pocket-Probe Digital Pyrometer

Model Descrip on Temperature Range PricePDK TC Type K -270° to 1372° C (-454° to 1999° F) $373.00

PDKO TC Type K w/ Op on Package -270° to 1372° C (-454° to 1999° F) $426.00

PDJ TC Type J -210° to 1200° C (-346° to 1999° F) $373.00

PDJO TC Type J w/ Op on Package -210° to 1200° C (-346° to 1999° F) $426.00

PDT TC Type T -270° to 400° C (-454° to 752° F) $373.00

PDTO TC Type *T w/ Op on Package -270° to 400° C (-454° to 752° F) $426.00

PDE TC Type E -270° to 1000° C (-454° to 1832° F) $373.00

PDEO TC Type E w/ Op on Package -270° to 1000° C (-454° to 1832° F) $426.00

X Lexan® display window - will not sha er (Add “X” to model #) $15.00

CC-PD Black Cordura Carrying Case $25.00

Specifi ca ons

Accuracy 1° C (1° F)


Display 127mm (1/2”) LCD

Ba ery 9 Volt

Window Tempered Glass or Lexan®

Thermocouple Type K, J, T, or E



Weight 448g (16oz)

• Resolution of 0.1° to 199.9° C or ° F• Full thermocouple ranges - K, J, E, or T• Fast response, high noise immunity• Durable case, operates with cover closed for added protection


Available Option Package consists of:Peak Hold Memory - Highest reading taken is stored in memory Peak Hold Reset - Clears “Peak Hold” memory & allows additonal measurementsMagnetic Mounting - Adheres to any iron or steel surface

For Glass Manufacturing, Metals Industry, Chemicals, & Plastics

• Swichable between ° C & ° F• Calibrated reference junction: ≤ 0.5° C • Operates from 0° C to 60° C ambient• 5-year warranty• Portable high precision, high quality

The Pocket-Probe Digital Pyrometer is engineered to be rugged, reliable, and consistently accurate with repeatable measurements. These pyrometers feature full range measurements and offer 0.1° resolution up to 199.9° F or ° C. Perfect for use on the production floor as well as in the lab! Made in the USA, this pyrometer is constructed from the finest materials and is backed with an unconditional 5-year warranty!


Steel-Cased Pocket-Probe Digital Pyrometer

EDL’s Steel Cased Pocket-Probe Digital Pyrometers are de-signed for extremely harsh industrial or laboratory condi ons. The steel case enclosure reduces RF and electro-magne c interference. These high precision industrial pyrometers de-liver reliable, accurate temperature measurement with 1/10% accuracy, 1/10% resolu on, and 1/2% repeatability.

As an assurance of durable and reliable opera on, EDL’s line of Pocket-Probe Digital Pyrometers are backed with an uncon-di onal fi ve year guarantee.

Model Descrip on Temperature Range PricePDK-SC TC Type K -270° to 1372° C (-454° to 1999° F) Call

PDKO-SC TC Type K w/ Op on Package -270° to 1372° C (-454° to 1999° F) Call

PDJ-SC TC Type J -210° to 1200° C (-346° to 1999° F) Call

PDJO-SC TC Type J w/ Op on Package -210° to 1200° C (-346° to 1999° F) Call

PDT-SC TC Type T -270° to 400° C (-454° to 752° F) Call

PDTO-SC TC Type *T w/ Op on Package -270° to 400° C (-454° to 752° F) Call

PDE-SC TC Type E -270° to 1000° C (-454° to 1832° F) Call

PDEO-SC TC Type E w/ Op on Package -270° to 1000° C (-454° to 1832° F) Call



Available Options:• Peak Hold Memory: Allows the operator to retain the highest reading taken in a process. The peak temperature value is displayed and stored in memory, even a er the instrument is turned off .

• Peak Hold Reset: Allows the operator to instantly reset the peak hold circuit clearing the memory for storage of new temperature values.

• Circuit Board Moisture Seal: Prevents premature failure of circuit board components. Ideal for environments prone to high moisture or corrosive chemical fumes.

• Magne c Backing: Allows moun ng of the instrument to any iron or steel surface such as machines, tanks, etc.

• Grounding Op on: For excessive interference from RF or electro-magne c interference. For use with grounded thermocouples.


Specifi ca ons




Ba ery 9 Volt




Case Steel

Weight 448g (16oz)

38

For The Harshest Environments!

Temperature Catalog 1.800.342.5335 www.edl-inc.com39 38

Pocket-Probe Digital Pyrometer - Extended Range

Specifi ca ons




Ba ery 9 Volt





Weight 448g (16oz)

• Resolution of 0.1° to 199.9° C or ° F• Full thermocouple ranges - K, J, E, or T• Fast response, high noise immunity• Durable case, operates with cover closed for added protection


For Glass Manufacturing, Metals Industry, Chemicals, & Plastics• Operates from -30° C to 72° C ambient• Swichable between ° C & ° F• Calibrated reference junction: ≤ 0.5° C • 5-year warranty• Portable high precision, high quality

EDL’s Steel Case Extended Range Pocket-Probe Digital Pyrometers are designed for extremely harsh industrial or laboratory condi ons. The steel case enclosure reduces RF and electro-magne c interference. This pyrometer allows for opera on in sub-zero environ-ments. These high precision industrial pyrometers deliver reliable, accurate temperature measurement with 1/10% accuracy, 1/10% resolu on, and ½% repeatability.

Backed with an uncondi onal fi ve year guarantee, these pyrometers are made to con nually perform in the harshest of environments.

With the new Pocket-Probe Extended Range Pyrometer you avoid all of the aggrava on and remove the cost of lost produc on associated with non-func oning instruments in sub-zero condi ons. This pyrometer is ideal for industries that must operate in cold temperatures – u li es and gas industry and other areas where extreme condi ons exist. Available in thermocouple types K, J, T, or E – this pyrometer is compa ble with all EDL sensors with mini plug termina ons. Also available with Lexan window and the Op ons Package (Peak Hold Memory, Peak Hold Reset, and Mag-ne c Moun ng).

Model Descrip on Temperature Range PricePDK-ER TC Type K -270° to 1372° C (-454° to 1999° F) $435.00

PDKO-ER TC Type K w/ Op on Package -270° to 1372° C (-454° to 1999° F) $488.00

PDJ-ER TC Type J -210° to 1200° C (-346° to 1999° F) $435.00

PDJO-ER TC Type J w/ Op on Package -210° to 1200° C (-346° to 1999° F) $488.00

PDT-ER TC Type T -270° to 400° C (-454° to 752° F) $435.00

PDTO-ER TC Type *T w/ Op on Package -270° to 400° C (-454° to 752° F) $488.00

PDE-ER TC Type E -270° to 1000° C (-454° to 1832° F) $435.00

PDEO-ER TC Type E w/ Op on Package -270° to 1000° C (-454° to 1832° F) $488.00



EDL’s con nuous improvements have resulted in the newest addi on to the Digital Pocket-Probe Pyrometer line. The new Pocket-Probe Extended Range Pyrometer operates in sub-zero temperatures. The lower temperatures have a drama c impact on your pyrometers performance by displays not opera ng correctly, sluggish performance, and slow response mes. Some pyrometer manufacturers don’t recommend their instruments be used in cold

weather, but with EDL’s Pocket-Probe Extended Range Pyrometer you are guaranteed smooth func oning even in temperatures as low as -30° F.

Calibra on Cer fi cates are available upon request.

Engineered to be rugged, reliable, and consistently accurate

with repeatable measurements, and backed by an uncondi onal 5 year warranty

Standard Pocket-Probe

Extended Range

Specifi ca ons




Ba ery 9 Volt




Case Steel

Weight 448g (16oz)


Steel-Cased Pocket-Probe

Extended Range

Available Option Package consists of:Peak Hold Memory: Highest reading taken is stored in memory

Peak Hold Reset: Clears “Peak Hold” memory & allows additonal measurements

Magnetic Mounting: Adheres to any iron or steel surface

Model Descrip on Temperature Range PricePDK-ER-SC TC Type K -270° to 1372° C (-454° to 1999° F) Call

PDKO-ER-SC TC Type K w/Op on Package -270° to 1372° C (-454° to 1999° F) Call

PDJ-ER-SC TC Type J -210° to 1200° C (-346° to 1999° F) Call

PDJO-ER-SC TC Type K w/Op on Package -210° to 1200° C (-346° to 1999° F) Call

PDT-ER-SC TC Type T -270° to 400° C (-454° to 752° F) Call

PDTO-ER-SC TC Type K w/Op on Package -270° to 400° C (-454° to 752° F) Call

PDE-ER-SC TC Type E -270° to 1000° C (-454° to 1832° F) Call

PDEO-ER-SC TC Type K w/Op on Package -270° to 1000° C (-454° to 1832° F) Call



Operates From -30° C to 72° C Ambient

(-22° F to 160° F)

Operates From -30° C to 72° C Ambient

(-22° F to 160° F)


Dyna-Temp Precision Pyrometer

Specifi ca ons



Ba ery 9 Volt


Thermocouple Type

J, K, E or T Mini-plug


Case Formed Aluminum

Weight 238g (8.6 oz)

• Aluminum case shields Dyna-Temp® from RF & electrical noise interference• High precision & high accuracy• Available in all Thermocouple Types• Portable, lightweight, suitable for laboratory & industrial use• Switchable from ° F to ° C • 2-year warranty

Model Type Termina on Accuracy PriceDTK K -200° to 1200° C (-328° to 1999° F) ± 1° $295.00

DTJ J -200° to 1200° C (-328° to 1999° F) ± 1° $295.00

DTE E -200° to 815° C (-328° to 1499° F) ± 1° $295.00

DTT T -200 to 400° C (-328° to 752° F) ± 1° $295.00

X – Lexan® display window (Add “X” to model #) $15.00

CC-DT – Black Cordura Carrying Case $25.00

Specifi ca ons



Ba ery 9 Volt


Thermocouple Type J or K Mini-plug



Weight 174g (6.2 oz)

• Economical price• Input jacks at top and bottom• Magnetic backing • Low battery indicator• Open sensor indicator• 1-year warranty

Model Type Temperature Range Accuracy Price

EZK-C K -35° to +985° C (-30° to +1800° F) ± 1° $143.00

EZJ-C J -100° to 595° C (-280° to 1100° F) ± 1° $143.00

X – Lexan® display window (Add “X” to model #) $15.00

CC-EZ – Black Cordura Carrying Case $25.00

E-Z Probe Compact Pyrometer

Model Type Temperature Range Price

PSK K -270° to 1372° C (-454 to 1999° F) $450.00

PSJ J -210° to 1200° C (-346 to 1999° F) $450.00

PSE E -270° to 1000° C (-454 to 1832° F) $450.00

PST T -270° to 400° C (-454 to 752° F) $450.00

X – Lexan® Window - will not sha er (Add “X” to model #) $15.00

CC-PS – Black Cordura Carrying Case $25.00

Specifi ca ons




Ba ery 9 Volt


Thermocouple Type K, J, E, or T



Weight 448g (16oz)

• Case sealed against moisture, contaminants, dust, & it floats!• Available in all thermocouple types • Peak hold memory standard • Magnetic backing for hands free use • Switchable from ° F to ° C • Easily cleaned & disinfected • 5-year warranty

Ideal for Food Industry, Food Safety, Chemicals, Oil, Military,

Heating & Air Conditioning

The case is sealed & can fl oat!

Pocket-Probe Sealed Digital Pyrometer



Ideal for Laboratories, Manufacturing Facilities, & Food Industry

Enclosed in an Aluminum Case!


For General Purpose, Food Industry, Manufacturing,

Utility, Gas, Pipeline and more!

The E-Z Probe Pyrometer off ers many of the same func ons as more expensive units, but at a frac on of the cost. This pyrometer is well suited for people on the move – completely portable, compact, and lightweight, this pyrometer deliv-ers reliable accuracy and rugged durability all at an economical price. Rugged enough to withstand daily use in laboratory and industrial applica ons, the E-Z Probe is one of the most dependable and trusted pyrometers on the market. This instrument is equipped with two input jacks located on the top and bo om of the instrument, allowing complete user versa lity. The E-Z Probe features an ABS Nylon Alloy case with internal ribbing for added strength. This instrument is also backed by an uncondi onal one year guarantee.


Model Type Temperature Range PriceATK K -100° to 1200° C (-280° to 2000° F) $685.00

ATJ J -100° to 595° C (-280° to 1100° F) $685.00

-20 Op onal 20 plug Channels (add “-20” to one of above part #s) $211.00

X Lexan® Window (Add “X” to part #) $25.00

Specifi ca ons


Resolu on 0.1° C (0.1° F) up to 199.9° C and F


Ba ery 9 Volt


Thermocouple Type K or J Mini-plug


Case ABS Plas c

Channels Standard 10 or Op onal 20

The Accu-Therm Temperature Monitoring System is available as a panel mount instrument for

permanent applications.

Accu-Therm comes standard with 10 plug channels (20 available)

EDL’s Metrology Laboratory will supply any sensor and instrument complete with a report

of calibration that is traceable to NIST!Call for pricing!

NIST Report of Calibration

Accutherm Mul -Zone Pyrometer


Engineered to func on fl awlessly, the Accutherm is a Portable Temperature Monitoring System for recognizing poten al problems in temperature related applica ons for peak performance, produc on, and effi ciency.

The convenient Accutherm Portable Temperature Monitoring System is protected by a steel cased housing, uses terminated sensor leads, and models are available to monitor 5, 10, or 20 zones.

Accutherm Applica ons:

• The Accutherm is ideal for monitoring mul ple zones in plas cs processing applica ons.

• Preven ve maintenance in the diesel engine industry and engine applica ons.

• Useful in heat-trea ng facili es and foundries.

• Applicable in the rubber and glass industries and any applica on where mul ple temperature zones are monitored.

• Used in food processing, furniture manufacturing and numerous other industries!


• Monitor 5, 10, or 20 thermocouples from one loca on• Self contained thermocouple switch can be used anywhere• Large rotary dial with easy to read posi on label• Accepts Mini-plug or Phonoplug terminated sensors• Heavy duty ABS Plas c case• Comes with extension lead for use with any pyrometer• 1-year warranty

Model T/C Type Channels Price5MTS- J, K, or E Determined by Instrument $239.00

Model T/C Type Temperature Range T/C Inputs PriceTP-5SSB

J, K, or E Determined by Instrument

5 $266.00

TP-10SSB 10 $350.00

TP-20SSB 20 $637.00

• Monitor up to 5 separate temperature zones• Secure direct connec on to EDL’s Dyna-Temp® Pyrometers• Accepts any Mini-plug terminated sensor• Can be used with other EDL pyrometers

Specifi ca ons

Switch Rotary Switch

Switch Life 25,000 Cycles min.

Input Connectors Mini color-coded thermocouple jacks

TC Inputs 5

TC Types E, J, or K

Case Formed anodized aluminum

Weight 140g (5oz)

Specifi ca ons

Switch Rotary Switch

Switch Life 25,000 Cycles min.

Input Connectors Mini color-coded thermocouple jacks

TC Inputs 5, 10, or 20

TC Types E, J, or K

Case ABS Plas c

Size 8.9” x 7.8” x 3.5”

Weight 1000g (35oz)

(Pyrometers sold separately)

Mul -Point 5-Zone Thermocouple Switch

Mul -Zone Thermocouple Switch



The compact sized Mul -Point Switch allows easy, hassle free, monitoring of up to 5 separate temperature zones. Easy to use, the outlet plug enables a secure, direct connec on to EDL’s Dyna-Temp Series Portable Pyrometers.

The Mul -Point Switch u lizes miniature thermocouple jacks to accept any miniature plug terminated sensor. The Mul -Point Switch may be used with other EDL pyrometers when used with an extension lead.

The Mul -Zone Thermocouple Switch allows for easy monitoring of up to 20 thermocouples from one central loca on! The self-contained thermocouple switch mounts easily and is available in 5, 10, or 20 posi on switch models.

Designed with large rotary dials, this unit is easy to see and switching posi ons is a breeze! Inputs are miniature thermocouple jacks which accept Mini-plug terminated sensors. The rugged aluminum case was built to resist abuse. This unit comes with an extension lead for use with any pyrometer. This unit comes standard with a one year warranty.


Model TC Type Temperature Range PriceKIT-PDJ J -346° to 1999° F $711.90

KIT-PDK K -454° to 1999° F $711.90

Model TC Type Temperature Range PriceKIT-EZK-C K 0° to 1800° F $504.90

KIT-PDJType J Thermocouple Temperature Range -346° to 1999° F -210° to 1200° C

KIT-PDKType K Thermocouple Temperature Range -454° to 1999° F -270° to 1372° C

Specifi ca ons for Pocket-ProbeAccuracy 1° C (1° F)



Ba ery 9 Volt


Thermocouple Type K,J, T, or E



Weight 448g (16oz)

Available Option Package:(Add $52.00 to kit for Option Package)

Peak Hold MemoryHighest reading taken is stored in memory Peak Hold ResetClears “Peak Hold” memory Magnetic Mounting Adheres to any iron or steel surface

Specifi ca ons for E-Z Probe



Ba ery 9 Volt


Thermocouple Type K with Mini-plug



Weight 174g (6.2oz)

KIT-EZK-CType K Thermocouple Temperature Range 0° to 1800° F

Parts Included In Kit:(1) E-Z Probe - EZK-C(1) BET Thermocouple Handle - HBET-KM(2) Mold Probes - SS90-12KE(2) Melt Probe - NB-06GS4KF4E(1) Carrying Case - CC-EZ

Parts Included In Kit:(1) Pocket Probe - PDJ or PDK(1) BET Thermocouple Handle - HBET-KM(2) Mold Probes - SS90-12KE(2) Melt Probe - NB-06GS4KF4E(1) Carrying Case - CC-PD

For the more exac ng professionals, the Pocket-Probe Plas cs Molding Temperature Kit is unmatched with its increased resolu on and rugged durability. Industry professionals have relied on this kit for over 2 decades. Perfect for use in the lab or on the produc on fl oor, you will immediately save money the fi rst me replacement ps are purchased instead of complete sensors with leads.

This kit was devised to save our customers money and to provide users with every device needed for accu-rate mold, melt, and barrel temperatures. This economical and all inclusive kit includes the Pocket-Probe Digital Pyrometer, the BET Interchangeable Handle & Lead System, Melt & Mold Probe Tips (2 of each!), and a convenient protec ve carrying case. Available with the op on package.

E-Z Probe Plas cs Molding Temperature KitTemperature measuring and monitoring is simple with EDL’s Plas c Molding Temperature Kit – recommend-ed by leading plas c industry professionals. Whether you are taking an air shot, checking a barrel, or mea-suring a mold surface this EDL kit will make your job easy and fast! In today’s economy, it’s cri cal for companies to conserve resources and minimize costly mistakes caused by erroneous readings from faulty equipment. Accurate temperature measurements are important in all industries; however, in the plas c industry accurate mold temperatures, accurate melt temperatures and accurate barrel temperatures are crucial.

With an EDL Plas c Molding Temperature Kit, you will be armed with the tools necessary to ensure you get the most accurate measurements every me you test. EDL pyrometers are durable and rugged and off er reliable and precise measurements at an economical price. These kits are a must-have for every industry professional who needs absolute trust in measurement.

Pocket-Probe Plas cs Molding Temperature Kit




Model TC Type Temperature Range PriceKIT-EZK-C-QA K 0° to 1800° F $454.50




Ba ery 9 Volt





Weight 174g (6.2oz)

KIT-EZK-C-QAType K Thermocouple Temperature Range 0° to 1800° F

Parts Included In Kit:(1) E-Z Probe - EZK-C(1) Straight Surface Sensor - SS-12KM(1) Blunt Needle Sensor - NB-06GS4KK2M(1) Roller Contact Sensor - RC2.5-08KM(1) Welded Wire Sensor - WU-06KM7(1) Carrying Case - CC-EZ

Quality assurance has become a must for all companies. EDL’s low cost QA Kit gives you the basic tools you need to handle most of your crucial temperature requirements.

The QA & Maintenance Temperature Kit includes:E-Z Probe Pyrometer - accurate and durable compact pyrometer. Straight Surface Sensor - designed to measure all fl at, smooth surfaces with accurate and fast response. Roller Contact Sensor - provides speed and accuracy when measuring cylindrical surfaces. Standard Needle Sensor - for general use in liquids and subsurfaces. Welded Wire Sensor - ideal for heated enclosures, ovens, vents, ducts, HVAC or wherever simple temperature measurements are prac cal. Protec ve Carrying Case - Durable Cordura material with molded foam insert for safe transport and storage.

E-Z Probe - QA & Maintenance Temperature Kit

E-Z Probe - Food & Beverage Temperature Kit




Ba ery 9 Volt





Weight 174g (6.2oz)

KIT-FBType K Thermocouple Temperature Range 0° to 1800° F

The E-Z Probe Food & Beverage Temperature Kit is the ideal solu on for accurate temperature measure-ments in industrial and commercial food environments. Whether you are checking a fryer, or a grill, calibra ng an oven, or verifying a refrigerator - this kit will work for you!

The Food & Beverage Temperature Kit includes:E-Z Probe Pyrometer - accurate and durable compact pyrometer. 45° Surface Sensor - designed to measure all fl at, smooth surfaces with accurate and fast response. Mini Versa le Surface Sensor - the safe Tefl on® p is ideal for delicate surfaces while delivering a fast and accurate response. Blunt Needle Sensor - for general use in liquids and subsurfaces. Reinforced Center Sharp Needle Sensor - for general use for inser on applica ons. Welded Wire Sensor - ideal for heated enclosures, ovens, vents, ducts, HVAC or wherever simple temperature measurements are prac cal. Protec ve Carrying Case - Durable Cordura material with molded foam insert for safe transport and storage.

Parts Included In Kit:(1) E-Z Probe - EZK-C(1) 45° Surface Sensor - SR45-12KM(1) Mini Versa le Surface Sensor - SVSM-05KM(1) Blunt Needle Sensor - NB-06GS4KQ4M(1) Welded Wire Sensor - WU-06KM7(1) Reinforced Center Sharp Needle Sensor - NCR-06GS4KF4M(1) Carrying Case - CC-EZ

Model TC Type Temperature Range PriceKIT-FB K 0° to 1800° F $618.30




E-Z Probe - Tire & Rubber Industry Temperature Kit

Model TC Type Temperature Range PriceKIT-EZK-CR K 0° to 1800° F $327.15




Ba ery 9 Volt





Weight 174g (6.2oz)

EDL’s E-Z Probe Pyrometers are the toughest, most reliable and aff ordable pyrometers available. Designed for the re and rubber industry, this kit is perfect for those who

require fast readings and complete versa lity.

This pyrometer gives instantaneous readings in 5° incre-ments for quick, precise results and easy to remember temperatures. Ideal for situa ons that require speed and accuracy, the LCD has a backlight (perfect for the pit and night racing), input jacks on top and bo om, a convenient belt clip and sensor holder for easy access and storage, and the ability to switch between °F & °C.

Also, included is the Reinforced Fine Hypodermic Sharp Needle Sensor (Part No. NHFR-06GS4KEHC) made specifi -cally for this industry. This kit provides the many resources needed for fast tes ng and quick results.

Model TC Type Temperature Range PriceKIT-NMP-GU E 0° to 600° F $543.60




Ba ery 9 Volt


Thermocouple Type E with Phono-Plug



Weight 174g (6.2oz)

KIT-NMP-GUType E Thermocouple Temperature Range 0° to 600° F

Parts Included In Kit:(1) Pocket-Probe Analog - NMP-06(2) Straight Surface Sensor - SS-12EP(1) Carrying Case - CC-EZ

Pocket-Probe Analog Gas & U lity Temperature Kit

• Reads in 5° increments for fast & easy readings• Input jacks at top and bo om • Switchable between °F & °C• Reinforced Fine Hypodermic Sharp Needle Sensor• LCD display with backlight• Includes belt clip and sensor holder • Low ba ery indicator• Open sensor indicator• 1 year warranty

Fuel, Nuclear, Shipping Vessels, Gas, & Electric (Utilities) and more!

The Pocket-Probe Analog Gas & U lity Temperature Kit is ideal for use in high temperatureRF environments or EMI applica ons, where mobility is key. This kit is valuable out in thefi eld, in manufacturing facili es, or in the lab for quick and accurate temperature measurement.

EDL engineered an exclusive bi-metal and thermistor compensation network to automatically adjust for changes in room temperatures. Unlike digital displays, you can visually track read-ings as they increase or decrease. Accuracy of analog meters is not affected by RF noise and electrical interference.

Pocket-Probe Analog Pyrometers require no batteries for operation, thus eliminating potential sparks. This feature makes EDL’s analog pyrometers ideal for explosion hazard areas where fumes and gases may pose a potential safety issue. All EDL Pocket-Probe Analog Pyrometers are thermocouple type E.

• Red-Knife pointer for easy readability• Spring-cushioned jewels absorb shock• Portable for mobile or bench top applications• Large, easy to read scale

• Automatically adjusts to changes in ambient temperatures• Automatic transit switch



KIT-EZK-CRType K Thermocouple Temperature Range 0° to 1800° F

Parts Included In Kit:(1) E-Z Probe Pyrometer - EZK-C(1) Reinforced Fine Hypodermic Sharp Needle Sensor - NHFR-06GS4KEHC(1) Carrying Case - CC-HL


Model PriceHUMKIT1-EV3 $3,490.58

Our temperature and humidity tes ng equipment is uniquely suited to the challenging measurement condi ons in the paper industry. EDL has the only complete measurement kit on the market for tes ng temperature and rela ve humidity on the produc on fl oor. This kit gives you “peace of mind” because of its high accuracy and easy to use features. The tele-scoping poles off er fast and solid adjustment thus improving your safety around the equipment you are measuring. All items sold in the kit are also available for individual purchase, but by buying the kit you get a 10% discount! Contact EDL for more informa on (434.799.0807, [email protected]).

*Prices diff er when purchased as individual items. Individual items and prices are listed in the chart to the right.

*The kit price of $3,490.58 includes a 10% discount.

Total Kit Price:$3,490.58*Reg. Price $3,878.42

HUMKIT1-EV3

The Temperature and Humidity Kit includes instruments and sensors that allow for both thermocouple and RTD tes ng. The items below are referenced to the right with their individual price and part numbers.

Order Informa on - Refer to page 3 for ordering instruc ons.Round DIN Style Plugs for RTDs Model Descrip on Qty. Unit

PriceList

PriceKit

PriceEZK-C

EZ-Probe Thermocouple Instrument, Type K Switch between °F & °C (see p.38 for more info.) 1 $143.00 $143.00 $128.70

VT-3Versa-Temp 3

RTD input digital pyrometer, round DIN plug (see p.39 for more info) 1 $225.00 $225.00 $202.50

RHW---1E3DC(Old Part # SPPT-1834B)

Humidity Block

Wet/dry bulb humidity sensor, circular connector, WBDB-BOTTLE included 2 $611.00

TC-4POLEPole for Roller Probe

Telescoping pole 46” long extends to 13’ 7” for thermocouple band sensor with 25’ long Tefl on®lead & Mini-plug

1 $556.00 $556.00 $500.40

RAB-KM-5”-SWB(Old Part #SPPT-1970)

Replaceable Roller Probe Holder w/Swivel

Roller Contact Sensor Holder, thermocouple type K, 5” lead w/Mini-plug, and mounted bracket with swivel

1 $196.00 $196.00 $176.40

R5-08K5” Replaceable Roller Probe Bands

5” replaceable roller probe band, type K, 800 °F 2 $78.00 $156.00 $140.40

RTRTD-4POLER1Pole for Humidity Block

Telescoping pole 46” long extends to 13’ 7” for RTD sensor with 25’ long 3 wire Tefl on®lead, round DIN plug

1 $434.00 $434.00 $390.60

RNBD061E3SDT4HH(Old Part # SPPT-1459AR1)

Inser on Sensor

1/8” Inser on sensor, 3 wire RTD 6” long, 5’ Tefl on®lead, round DIN plug 1 $123.00 $123.00 $110.70

RNBD061ESDT4HW(Old Part #SPPT-1459BR1)Inser on sensor w/ wick

1/8” Inser on sensor with wick on nee-dle. 3 wire RTD 6” long, 5’ Tefl on®lead, round DIN plug

1 $132.00 $132.00 $118.80

WRENCH-17MM 17 Millimeter Wrench 1 $16.00 $16.00 $14.40

TORXDR10 #10 Torx Driver 1 $7.00 $7.00 $6.30

SCREWDRPH1 Phillips Screwdriver 1 $9.00 $9.00 $8.10

WBDB-BOTTLE Fill bo le with needle. Water bo le with needle for fi lling Wet/Dry bulb block 1 $3.00 $3.00 $2.70

PKGCLIP-WICK Copper clips w/ 36” wick, pack of 10 1 $10.00 $10.00 $9.00

CC POLE/CASECase w/ foam cutout, waterproof case protects & holds all humidity instruments & accessories (shown in le photo)

1 $642.00 $642.00 $577.80

INST-HUMKIT Humidity Kit Instruc on Manual 1 $0 $0 $0

EZK-CEZ-Probe

SPPT-1834BHumidity Block

RTRTD-4POLER1Pole for Humidity Block

TC-4POLEPole for Roller Probe

SPPT-1459AR1Inser on Sensor

SPPT-1459BR1Inser on Sensor

with wick

VT-3Versa-Temp 3

EDL Temperature & Humidity Kit

RAB-KM-5”-SWBReplaceable Roller Probe

Holder w/Swivel


MX Temperature ControllerSelf Contained Pre-Wired Controller

Specifi ca ons

Thermocouple Types K,J, R, B, S, T, E, NRTD: Pt100; 4-20 mA, 1-5 VDC

Single Zone Size 8.25cm x 15.24cm x 15.24cm(3.25” x 6” x 6”)

Single Zone Weight .09kg, .17g (2 lbs, 6oz.)

Dual Zone Size 21.59cm x 16.256cm x 23.368cm(8.5”x6.4”x9.2”)(not including handle)

Dual Zone Weight 3.90kg. (8.6 lbs)

Resolu on 1.0°, 0.1°

Process Value Accuracy ±0.5% at Full Scale

Control Ac on Fuzzy Logic, PID w/ Autotune

Ramp/Soak 16 Ramp - 16 Soak

Input Power 120/240 VAC 50/60 HZ

Display 4 Digit LED

Opera on Temperature 14 to 122 F/C Equivalent

Opera on Humidity 90% RH Max

Storage Temperature -4 to 140 F/C Equivalent

Model Descrip on PriceMX (TC type)-11-1 MX 120 VAC 15 Amp Single Zone Controller $695.00

MX (TC type)-11-2 MX 120 VAC 20 Amp Single Zone Controller $730.00



MX (TC type)-21-1 MX 120 VAC 15 Amp Dual Zone Controller* $1,395.00

MX (TC type)-21-2 MX 120 VAC 20 Amp Dual Zone Controller** $1,410.00

MX (TC type V)-22-1 MX 240 VAC 15 Amp Dual Zone Controller* $1,420.00

MX (TC type V)-22-2 MX 240 VAC 20 Amp Dual Zone Controller** $1,450.00* Dual Zone 15 Amp controller requires 20 Amp service** Dual Zone 20 Amp controller requires 30 Amp service

• Controls temperatures from ambient to maximum sensor range• Selectable resolution• Readout available In °C or °F• Patented fuzzy logic with PID Autotune• 16 segment ramp/soak programming• Accepts thermocouple types J, K, R, B, S, T, E, N, RTD type, PT100, 4-20mA, & 1 – 5 VDC inputs• Available with either dual or single channels• 120 or 240VAC - 15 or 20 amp models• 1-year warranty

The MX series of temperature controllers are totally self-contained pre-wired systems that incorporate the FUJI PXR Series Controllers. There is no need for relays, circuit breakers, or power switches. All that is needed is an outlet with 120 VAC or 240 VAC power. The MX Control-lers are effi cient, convenient, and portable.

The MX Temperature Controller is designed with safety in mind. The on/off switch features a built in circuit breaker to protect process components if an overload occurs. If an input sensor should break, the automa c sensor break protec on will detect the fault and shut down the process before damage occurs. The MX comes pre-wired for your specifi c sensor. Standard thermocouple sensors J, K, R, B, S, T, E, N are supported, as are 3 wire RTD sensors. Thermocouple sensors with 4 – 20 mA and 1- 5 VDC outputs are also available. An op onal 12, 15 or 24 VDC source is available to power external sensors such as Tempera-ture Transmi ers or Infrared Sensors.

The FUJI PXR controllers use a patented Fuzzy Logic Algorithm with PID Autotune. The controller “learns your process” using the PID parameters as a star ng point for all decisions made by the control-ler. Your process will reach its set point in the shortest me possible while virtually elimina ng overshoot. If the process should experience a disturbance the controller correc vely reacts to insure the process maintains a stable temperature. In addi on, they can be programmed for 16 Ramp and Soak segments or two 8 segment pa erns.

Single Zone MX Temperature Controller (below)

MX Temperature Controller

Dual Zone MX Temperature Controller


Model Fits Instruments PriceCC-HL E-Z Probe (p.38) $13.50

Model Fits Types PriceCC-DCC E-Z Probe $30.00

CC-TCC Dyna-Temp $30.00

Model Fits Instruments PriceCC-NMP Pocket-Probe Analog (p.36)

$25.00CC-PD Pocket-Probe Digital (p.37)

CC-EZ E-Z Probe (p.38)

CC-DT Dyna-Temp (p.38)

• Made of durable Cordura material• Works with most EDL Pyrometers• Foam insert keeps instrument safe and secure• Ideal for safe travel and storage• Case can accommodate an entire sensing kit

• Made of durable leather with felt lined Instrument compartment• For use with E-Z Probe or Dyna-Temp series pyrometers• Foam insert keeps instrument safe & secure• Includes flap with locking clasp & belt strap • Separate compartment for sensors & other accessories

• Durable, light weight canvas• For use with E-Z Probe• Belt loop & Velcro flap• Separate compartment for sensors & other accessories • Easily accessible

Instrument Carrying Cases

Order Informa on

Model Fits Instruments PriceCC-PS Pocket-Probe Sealed (Black Case) $25.00

CC-PS-Y Pocket-Probe Sealed (Yellow Case) $25.00

• Made of durable Cordura material• For Pocket-Probe Series Sealed Pyrometer• Clip-on strap for hands free operation• Openings for LCD display and Mini-plug input• Separate compartments for sensors & other accessories

Order Informa on

Order Informa on

Order Informa on

Sealed Pocket-Probe Carrying Case

(Instruments and sensors sold separately)

Leathere e Carrying Case


Compact Canvas Carrying Case


Universal Codura Carrying Case


CC-DCC (E-Z Probe Case)

CC-TCC (Dyna-Temp Case)

CC-PS-Y(Yellow Case)

CC-PS(Black Case)


EDL’s high quality gold plated lugs are ideal for all connec ons where a crimp style connector is required for low resistance, low microvolt off set, and to reduce the eff ects of corrosion. The EDL instrument lug is a high quality connector, suitable for laboratory and industrial instrument con-nec ons. The gold plated thermally conduc ve copper fork terminal reduces thermal EMF at the terminal.

Designed to be durable, these lugs will not peel or crack during use - even in severe cases where they are bent. The pla ng on these lugs is fl ake resistant and will allow bending and or shaping as required. Normal soldering will not eff ect the gold pla ng; wires may be crimped or soldered into the barrel. These lugs are recommended for use with SPRTs, RTDs, and thermistors.

EDL lugs are compa ble with all major instrumenta on equipment. These lugs are ideally suited for high accuracy resistance measurements especially when using bridge-type instrumenta on. EDL lugs are capable of handling up to #16 gauge wire, the spade is for 1/4” binding posts, 1/4” screws or smaller. Solid copper - no pla ng - available upon request.

Specifi ca ons

Fork ID 6.8 mm (0.270”)

Outside 1 mm (0.437”)

Thickness 0.81 mm (0.032”)

Barrel Length 6.7 mm (0.265”)

Wire Size 18 to 22 Ga.

Type Descrip on Quan ty PriceTHL-SLCUGD Gold Plated Lugs Package of 25 $51.00

THL-SLCUCU Solid Copper Lugs Package of 25 $39.00

Order Informa on

• Same day shipping • Will not peel or crack even if bent• Recommended for SPRTs, RTDs, & Thermistors• Suited for high accuracy resistance measurements• Soldering will not affect gold plating• Gold plated conductive copper or solid copper available • Package of 25

gh augs are capabl

or smaller. Solid copper

Copper & Gold Plated Instrument Lugs

Thermocouple Copper Clips

Type Descrip on Quan ty PriceEHC-CLIPCC020S Copper Clips Package of 25 $15.00

Order Informa on

Copper clips are used to fi nish the terminal side of thermocouple sensors. Many thermocouple cables are wired directly into control cabinets where there can be signifi cant levels of AC noise. To help reduce this poten al interference, Stainless Steel braided shielding is recommended. To prevent the shielding from moving, a copper clip is crimped over the shielding to the thermocouple cable.

It is recommended that an inner shrink tube layer be placed over the shielding to prevent the bare wire ends of the Stainless Steel from presen ng any issues. Our kits come with 10 copper clips, 10 inner pieces of 1” long shrink tubing, and 10 outer pieces of 1” long shrink tubing.

This system is designed for 3/16” or 1/8” inner diameter shielding. Whenever possible, all Stainless Steel shielding entering control boxes should be covered with shrink tubing to prevent electrical shorts.

EDL Custom EngineeringEDL off ers extensive custom engineering capabili es for process measurement and control. Our versa le manufacturing and machining allows us to effi ciently produce even small quan es of temperature sensors or prototypes that require special machined components.

Our engineering team delivers the knowledge and experience to customize and develop new products for customer-specifi c applica ons. Contact us for a solu on to your unique temperature applica on.

49

*Price is subject to change


Thermocouple Wire

Type Temperature T/C Descrip on Price

TWE-2026TS2T 260° C (500° F) E 20G TFE Twisted pair Stranded Unshield Thermocouple Grade Please Call

TWI-CU3015DTBE T Wire Solid Copper conductor 30g PFA insula on Please Call

TWJ-2026TS2T 260° C (500° F) J 20G TFE Twisted pair Stranded Unshield Thermocouple Grade Please Call

TWK-2026TS2T 260° C (500° F) K 20G TFE Twisted pair Stranded Unshield Thermocouple Grade Please Call

TWK-2216TS2P K 22G PFA/PFA; Stranded; twisted pair; Unshielded; Special limits Please Call

EDL off ers a large assortment of high quality thermocouple wire for use in many applica ons within numerous industries. Our thermocouple wire is produced with the highest quality standards and is available in a variety of spool lengths at very compe ve prices. Ideal for use in conjunc on with our spade lugs and as-sorted connectors for producing complete probes or extension cables. Custom wire confi gura ons are also available for specifi c applica ons. Please contact our helpful sales staff for more detailed informa on.

Since 1943, EDL has been known across industries for its prompt service, superior quality products and compe ve pricing. Cus-tomer sa sfac on remains our number one goal. We use only the fi nest materials available and our parts are hand assembled by skilled cra smen. And remember, as your needs change, we will evaluate those needs and off er you the products and services that will help you achieve your new goals. As a leading manufacturer we will produce products based on your specifi ca ons.

EDL off ers the fi nest thermocouple wire available at the most reasonable prices. We off er a variety of wire material and sizes. Please call our sales department for addi onal informa on, or if you are looking for a wire you don’t see here…let EDL be your sup-plier for all things temperature measurement related! Our wire is available in convenient 50, 100, and 200 foot lengths.


Custom wire confi gura ons are also available for specifi c applica ons

Please contact our helpful sales staff for more detailed informa on.


Devices EDL Can Calibrate

• Calibra on tes ng in all standard units (°C, K, °F, or Ohms)

• Provides service to outside labs

• Surface sensor calibra on

• Tes ng to ASTM standards

• Calibra on on repaired items

• Controlled atmosphere tes ng

• Power dissipa on tes ng

• Response me tes ng

• Resistance temperature indica ng instruments• Thermocouple indica ng instruments• Industrial RTD sensors• Precision resistance temperature detectors• Thermocouple sensors in all standard calibra ons• Thermister temperature sensors• Liquid in glass themometers

• Applica on specifi c temperature sensors (i.e. Roller Contact)• Analog temperature indica ng instruments• Bi-metal temperature gauges• Circular & strip chart temperature recorders• Autoclave thermometers• SPRT by comparison method

EDL Calibra on Laboratory & Services

Since 1943, EDL’s lab has been in opera on suppor ng the manufacturing division by providing a fi rm scien fi c founda on and

direct traceability to the na onal thermodynamic temperature scale ITS90.

EDL's lab specializes in providing a source for unique temperature calibra- on and tes ng requirements. From the Cryogenic range to above 1500

°C, EDL will test your sensors to ASTM standards. EDL calibrates both our own sensors & instruments and those purchased elsewhere. Controlled atmosphere tes ng, power dissipa on tes ng, and response me tes ng are just a few of EDL's capabili es.

Range of services include calibra on of resistance temperature indicat-ing instruments, thermocouple indica ng instruments, industrial RTD sensors, precision RTD’s, thermocouple sensors in every thermocouple type, thermistor temperature sensors, applica on specifi c temperature sensors (i.e. roller contact sensors, etc.), analog temperature indica ng instruments, bi-metal temperature gauges, circular and strip chart tem-perature recorders, liquid in glass thermometers, autoclave thermom-eters, and SPRT’s.

Reports of calibra on are available in all standard units including °C, °F, K, Volts, and Ohms.


Model Temperature Range PriceSBB-1 -30° to 110° C (Low Range)

Call For PricingSBB-2 Ambient to 350° C (Mid-Range)

SBB-3 Ambient to 650° C (High Range)

SBB Single Black Body Infrared Calibrator

Order Informa on

Easily Calibrate Your Infrared Pyrometer!Single Black Body Infrared (IR) Calibrators are designed for easy and reli-able tes ng of almost any in-line or handheld infrared pyrometer. These IR calibrators provide extremely uniform Black Body targets with a high emis-sivity of >0.98ε. Perfect for applica ons requiring only one temperature range, calibrators in the SBB line are compact enough to use in the fi eld or for permanent placement in the lab. Available in 110 Vac and 220 Vac versions, with European cord sets as required.

EDL’s Single Black Body Infrared Calibrators are available in three tem-perature ranges - low (-30 to 110° C), mid (Ambient to 350° C), and high (Ambient to 650° C). The advanced engineering of the Black Body features a large target area of 2.75in2 with a built-in temperature controller that boasts high accuracy, high reliability and an advanced program that allows user control over the features of the controller.

The emissivity of the isothermal target is set at 0.986ε, and the target temperature can be controlled in set-point increments of 0.1°. These cali-brators were designed to use a reference RTD inserted into the Black Body and the sensor may be easily removed for independent calibra on.

EDL’s IR calibrators were designed with the user in mind and are easy to setup and easy to use. Simply set the desired temperature from the con-venient front panel control bu ons, wait a few moments to ensure stabil-ity, and point the gun at the target. Radiated energy from the Black Body is measured by your IR thermometer. Simply compare the UUT (infrared gun) to the reading on the display and record the diff erence.

EDL’s low temperature SBB calibrators come with a foam plug that is inserted into the aperture when readings below 0° C are being taken. This simple method keeps frost from forming on the Black Body and keeps the instrument func oning to specifi ca on. Nitrogen purging can be added, but we have found no need for such an expensive solu on to a simple problem.

Data is easily collected and downloaded to the computer through the RS-232 computer interface which allows computer control of the set points for automa c tes ng. A reference sensor is included. EDL’s Black Bodies are the most trusted and reliable units available. Economical, easy to use, and compact – EDL’s Black Bodies are the number one choice for IR Calibrators. When trust in measurement ma ers, count on EDL.

SBB-1 IR CalibratorIf you're calibra ng IR guns at cold temperatures, you'll love the SBB-1, with its state of the art solid-state cooling technology, this new IR calibrator reaches -30° C (22° F) in normal ambient condi ons. In addi on, ice build-up on the target is avoided simply and effi ciently, no need for expensive gas purging. At the upper end of its range, the SBB-1 provides accurate and stable temperatures to 110° C (230° F).

With hea ng and cooling mes of about 20 minutes from ambient to either extreme, the SBB-1 IR calibrator gets you to your set temperature quickly and performs superbly when it gets there. Just compare your IR devices (UUT) to the temperature display which is factory calibrated to be within ±0.5 ° C.

SBB-2 IR CalibratorFor IR calibra ons above normal ambient, the Model SBB-2 provides a stable Black Body target up to 350° C (662° F). With accuracy to ± 0.5° C and stability to ± 0.1° C. This unit is able to calibrate most handheld pyrometers.Short hea ng and cooling mes mean you won't have to wait long to get your work done. With a heat up rate of >10° C per minute, from room tem-perature to 350° C (662° F) the SBB-2 only takes a li le over ½ an hour, and is stable within 15 minutes a er reaching its set temperature.

SBB-3 IR CalibratorFor IR calibra ons above normal ambient, the Model SBB-3 provides a stable Black Body target up to 650° C (1200° F). With accuracy to ±0.5° C and stability to ±0.1° C. This unit is able to calibrate most handheld pyrometers. Short hea ng and cooling mes mean you won't have to wait long to get your work done. With a heat up rate of >10° C per minute, from room tem-perature to 650° C (1200° F) the SBB-3 only takes a li le over an hour, and is stable within 15 minutes a er reaching its set temperature.

*Infrared Pyrometer is not included.

Instrument Vent

Power Supply

Reference Sensor Input(SBB-1 and SBB-2 u lizes a RTD Reference Sensor, the SBB-3 u lizes a Thermocouple Reference Sensor)

RS232 Connector

EDL’s Single Black Body Infrared Calibrators are available in three temperature ranges:

SBB-1 / Low Range (-30 to 110° C)SBB-2 / Mid-Range (Ambient to 350° C)SBB-3 / High Range (Ambient to 650° C).


Model Temperature Range Price

DBB-350 Low Range: -20° to 135° CHigh Range: 20° to 350° C

Call For PricingDBB-650 Low Range: -20° to 135° C

High Range: 20° to 650° C

DBB Dual Black Body Infrared Calibrator

Order Informa on

EDL’s Dual Black Body calibrators make infrared (IR) calibra on faster and easier than ever before! You don’t have to be an engineer to operate these units – EDL’s calibrators are simple to set and control.

The Dual Zone Black Body Calibrators (DBB) were designed for calibra ng infrared pyrometers with mul ple temperature ranges. We off er two versions - the DBB-350 with a low range of: -20° to 135° C, and high range: Ambient to 350° C; and the DBB-650 with a low range of: -20° to 135° C, and high range: Ambient to 650° C. The low temperature Black Body is powered by convenient and effi cient Thermo Electric modules and our unique design gives you high reliability coupled with high accuracy.

These calibrators ensure accurate calibra ons of almost every infrared pyrom-eter available. With a large target area of (>2.5 in2), and a high accuracy tem-perature controller – EDL’s IR calibrators off er be er accuracy and stability over other IR calibrators available on the market. The emissivity of the isothermal target is machined and coated to give a high emissivity of 0.986ε, and the tar-get temperature can be controlled in set-point increments of 0.1°. Fast hea ng and cooling mes make these calibrators very effi cient in the lab. EDL’s line of DBB calibrators are easy to use and operate. With no trouble, they can be checked in the fi eld, thanks to the RTD sensor that is easily removed from the Black Body for independent calibra on.

These handy infrared calibrators are a breeze to use. Merely set the desired Black Body temperature from the convenient front panel control bu ons, wait a few minutes to ensure stability, aim the gun at the target and shoot. The radiated energy from the Black Body is measured by your IR thermometer. Merely compare its reading to the display on the DBB and record the diff er-ence.

Data is easily collected and downloaded to the computer through the RS-232 computer interface which allows computer control of the set points. A refer-ence sensor is included. Economical, easy to use, and compact – EDL’s Black Bodies are the number one choice for IR Calibrators. When trust in measure-ment ma ers, count on EDL.

SBB/DBB Calibrated Reference Sensors

Model Descrip on PriceBB-350 Calibrated RTD Reference Sensor Call For Pricing

BB-650 Calibrated Thermocouple Reference Sensor Call For Pricing

Order Informa on

EDL’s Reference Sensors are designed for use as Secondary Standard Ref-erence PRT’s. These sensors ensure correct temperature measurement and stability in dry well and bath style calibrators; ideal for industrial temperature calibra on applica ons where stability and accuracy are cri cal. EDL’s Reference Sensors were designed to be extremely stable with very low dri . They off er quick response mes, accurate measure-ments, and may be used in conjunc on with any dry well or bath style calibrator. Custom diameters and lengths are available upon request.

BB-350 Specifi ca onsType: BB-350 RTD Reference Sensor

Temperature: -196° C to 450° C

Dimensions: 6” long x 0.125” sha type 304SS with handle and 36” 4 - wire Tefl on insulated lead.

Accuracy: ≤ 0.5° C

Termina ons: Bare, mul ple plug types

BB-650 Specifi ca onsType: BB-650 Thermocouple Reference Sensor

Temperature: -200° C to 700° C

Dimensions:6” long x 0.125” sha type 304SS with handle and 36” braided Stainless Steel #20 gauge stranded, Tefl on insulated thermocouple wire lead.

Accuracy: ≤02.5° C

Termina ons: Bare, mul ple plug types

B-350RTD Reference Sensor

B-650Thermocouple Reference Sensor


Model Temperature Range PriceT-VAL Ambient to 760 °C (1400 °F) Call for Pricing

Specifi ca ons

Power 110V ±15%, 3 amps, 60 Hz

Calibrator Block 8.3cm (3.3”) x 13cm (5.3”) w/ 13cm (5.0”) L Handle

Block Weight 1.3kg (92.9’)

Well Fully Isolated

Case Injec on Molded (ABS)

Lid Lexan®

Block Well 3.2mm (.125”) A, 4.8mm (.187”) V, 6.3mm (.250”) D 50.8mm (2.0”) Deep

Temperature Range Ambient to 760 °C (1400 °F)

Accuracy Over Full Temperature Range ±3.5 °C (6.3 °F)

Stability ±0.5 °C / °F (Over 15 min. period)

Warm-Up Time 10 min. from Ambient to 649 °C (1200 °F)

T-VAL Remote Head DrywellEDL’s T-Val is a small portable fi eld calibrator that simplifi es the on-site calibra on of immersion or inser on sensors. With a small compact design, the T-VAL system gives unparalleled portability and enables in-fi eld calibra- ons to be performed on hard to reach sensors - without the removal or

disconnec on of sensor cables and hardness. This reduces cost and the me necessary to preform a calibra on, also allowing electrical loop valida on to be made while tes ng the sensor - greatly facilita ng the troubleshoo ng process.

Order Informa on

You don’t have to be an engineer to use EDL’s STS calibrators. Our units come pre-programmed and off er an RS-232 computer interface and I-Tools. These calibrators are very easy to use, plug it in, set your temperature (wait a few minutes for the unit to reach the set temperature) and begin checking your probes. STS calibrators use a high quality controller that allows the set point to be set with a resolu on of 0.1°, and they are available in both 110Vac and 220Vac versions. STS calibrators are o en used right on the produc on fl oor to verify sen-sors before, during, and a er a shi . These instruments allow you to remove doubt from your measurements.

The standard line of surface calibrators include: the STS-SC1 (high temperature), and the STS-SC2 (mid-range). Both the STS-SC1 and STS-SC2 weigh only 16 lbs., so they are easily transported. The 2” diameter block gives ample surface area for calibra ons of surface sensors up to the maximum temperature of the calibrator. These lightweight, easy to use calibrators are guaranteed to perform be er than the larger, more expensive dry-wells available on the market.

These units feature stability of <±0.05° C with temperatures as high as 650° C. All EDL calibrators include a NIST-traceable calibra on cer fi cate. The STS line is ideal for sensors, digital thermometers, dial gauges, and bulb switches. All data is easily collected and downloaded to the computer through the RS-232 computer interface which allows computer control of the set points for automa c tes ng. EDL’s calibrators are economi-cal, easy to use, and compact they are the number one choice for surface calibrators on the market today. When trust in measurement ma ers, count on EDL.

STS Surface Transfer Standard

STS-SC1 Surface CalibratorThese calibrators are the perfect choice for a high temperature surface calibra-tor. They can be used for calibra ons from ambient to 650° C, with stability of <± 0.05° C. This calibrator is ideal for calibra ng surface sensors of all styles and types, in the fi eld, on the produc on fl oor, as well as in the lab. Short hea ng and cooling mes mean you won't have to wait long to get your work done. From room temperature to 650° C (1202° F), in only 90 minutes, the STS-SC1, makes your calibra ons manageable.

STS-SC2 Surface CalibratorThe STS-SC2 is a surface calibrator with a temperature range of Ambient to 315° C. This model was designed for the most common temperature range and is perfect for quick tes ng on the produc on fl oor or in the fi eld. EDL’s STS-SC2 is fast; with a hea ng block built around an advanced hea ng element. In addi on, these calibrators have a fast cooling fan that helps them cool down almost as quickly as they heat up. STS calibrators make all surface calibra ons easy and effi cient.

Model Temperature Range Price

STS-SC1 Ambient to 650° C (High Temp) Call For

PricingSTS-SC2 Ambient to 315° C

Order Informa on

EDL’s Surface Transfer Standard Calibrators are perfect for accurate

tes ng of all surface sensors.


Custom Dry Well BlocksEDL off ers a wide variety of custom dry well calibrator blocks to be used with any dry well calibrator. Blocks are off ered in Copper, Brass, and Stainless Steel. The blocks holes are drilled based on your specifi ca ons, and sensor clearance is taken into account. For example, a 0.025” diameter sensor may be safely placed in the calibrator well as it is drilled to a 0.257” diameter.

The wells may also be drilled to custom metric sizes and unusual standard sizes. We also off er a surface calibrator insert which has an embedded reference thermocouple which allows the user to make surface calibra ons.

For addi onal informa on on products and calibra on contact us at 434.799.0807 or [email protected]

Dry WellInsertion

SurfaceCalibration

• Interchangeable wells for PRI-1• Surface thermocouple output• Expanded uncertainties of ±1.0° C achieved for entire temperature range

Model Temperature Range PricePRI-1 Ambient to 315° C Call For Pricing

Order Informa on

EDL’s Prac -Cal Dry Well Calibrator (PRI-1) was designed for fast and easy test-ing and verifi ca on of surface and inser on sensors. Accurate temperature measurement is vital for quality, compliance, safety, and effi ciency. EDL’s high quality Dry Well Calibrators are exactly what you need for ensuring sensors and instrumenta on are performing properly, by providing reference temperatures for tes ng and calibra ng those devices. The PRI-1 off ers a means of tes ng your temperature devices over a range of ambient to 350° C. Our unique design accommodates prac cally any style, shape and size of sensor you may have a need to test. Because these units are compact, you can take them virtually anywhere. The small footprint allows for easy placement of the calibrator making it a breeze for tes ng sensors that are in tough to reach places. The PRI-1 was engineered with a standard removable well, and a reference thermometer can be used to further increase the accuracy of your measurements. Addi onal custom engi-neered inserts are available to accommodate almost any size sensor. Please call our Sales Team for informa on on how to order custom wells to accommodate your sensors.

Like all EDL calibrators, the PRI-1 is easy to use. Any technician can use this calibrator to achieve highly accurate and stable readings. The PRI-1 has an easy to navigate touch screen that allows for easy se ngs and set point memory recalls. We use a high quality controller that allows the set point to be set with a resolu on of 0.1°.

With ample surface area, we make surface sensor tes ng easy to accomplish. Our standard well for inser on probes accommodates 3 - ¼” sensors plus one reference sensor simultaneously. These high performance calibrators use a series of internal sensors to allow us to extrapolate the actual surface tempera-ture of the calibra on block. This unit has an unbeatable one year warranty and we off er ini al and annual recalibra on in our calibra on lab.

All of EDL’s products are made in the USA. We guarantee the highest quality goods that are engineered and built by skilled cra smen with ample experi-ence in the temperature measurement and calibra on fi eld. Since 1943, EDL’s focus has been on achieving levels of accuracy that are unmatched by any other company. No other company off ers the same level of care. Let EDL take uncertainty out of your measurements – rely on EDL for all of your temperature and calibra on needs.

Prac -Cal Dry Well Calibrator

www.edl-inc.com 1.800.342.5335 Temperature Catalog 56

EDL’s Cryogenic Calibrator (CRYO-CAL-2) is a pas-sively cooled cryostat that allows the user to cali-brate temperature measurement devices from 77 K (-196° C) to ambient at an aff ordable price. Using liquid nitrogen as the cooling media eliminates the extreme cost of cascade compressor systems and the cumbersome nature of such baths.

Calibra ng at 113 K (-160° C) is no problem, and in fact, any temperature above 77 K (-196° C) can be accomplished with dwell mes greater than one hour. No expensive bath fl uids are required and there is virtually no maintenance because there are no moving parts or pump-ing systems. With less than four liters of LN2 ,comparison calibra ons can be performed at any temperature above 77 K (-196° C).

• Min. use temperature 77 K (-196 °C)• Max use temperature 273 K (0 °C)• Stability: 20 mK• Uniformity: 50 mK

Model Temperature Range PriceCRYO-CAL-1 Reference Temp. 77 K (-196° C) Call For Pricing

Model Temperature Range PriceCRYO-CAL-2 Reference Temp. -196° C (77 K) Call For Pricing

Corrosion resistantCopper Equaliza on Block

EDL brings s rred liquid bath calibra on to the fi eld and the laboratory bench top. Our Mini Baths are high precision portable calibra on source instruments that simply out perform even the best dry wells – at aff ordable prices! Accuracies and uniformi es be er than 20 mK are equivalent to most large style baths and all smaller style baths at a frac on of the cost. They are ideal for the calibra on of thermocouples, PRTs, thermistors, and liquid in glass thermometers.

The EDL Mini-Ultra Bath is supplied with sensor support bushings that allow fast simple immersion of standard size sensors. A specially designed double o-ring lid seals the unit for storage and transport so that the media can remain in the tank. Both units include an RS-232 interface for use with the supplied I-Tools so ware. Full func on programming, monitoring and graphing from your laptop or PC is available using this open architecture system so ware.

Model Temperature Range PriceMUB-20130 -20° to 130° C Call For

PricingMUB-50200 50° to 200° C

Order Informa on

Mini-Ultra Bath

• RS-232 interface• Stability: 20 mK• Resolution 10 mK• 6”(15.24cm) insertion depth

Cryo-Cal-2 Cryostat Calibrator

Order Informa on

Order Informa on

Cryo-Cal-1 Calibrator

• Min. use temperature 77 K (-196° C)• Max use temperature 273 K (0 °C) -ice point• Stability: ± 0.002 K• Uniformity: ± 0.002 K

The CRYO-CAL-1 is an alterna ve to the argon triple point and other cryogenic calibrators. It is used to calibrate temperature sensors such as SPRTs, RTDs, and thermocouples via comparison calibra on. The Cryo-Cal® u lizes the phase change point of liquid nitrogen (LN2) to establish a reference temperature of approximately 77 K (-196 °C).

There are four Tefl on® lined bushings that guide sensors into the gold plated equaliza on block. It is completely immersed in the cryogenic liquid contained within a super-insulated vacuum dewar. The Cryo-Cal®’s gold plated equaliza on block greatly reduces corrosion and oxida on and contributes to the ± 0.002 K stability and uniformity of the whole system.

The Finest in Comparison Calibra on!


Model Temperature Range PriceMSB-200D 50° to 200 °C Call for Pricing

MSB-500D 200° to 500 °C Call for Pricing

Mini-Salt Bath

Order Informa on

Replacement Salt for Salt BathsHigh Quality Formed Salts

Mini-Salt Bath AccessoriesCustom Dry Well BlocksEDL off ers a wide variety of custom dry well calibrator blocks to be used with any dry well calibrator. Blocks are off ered in Copper, Brass, and Stainless Steel. The blocks holes are drilled based on your specifi ca ons, and sensor clearance is taken into account. For example, a 0.025” diameter sensor may be safely placed in the cali-brator well as it is drilled to a 0.257” diameter. The wells may also be drilled to custom metric sizes and unusual standard sizes. We also off er a surface calibrator insert which has an embedded reference thermocouple which allows the user to make surface calibra ons. *Call for current pricing

The MSB-200-D and the MSB-500-D both have a 15” square foot print and are well suited for bench top laboratory use as well as easy portability for use in the fi eld. Fluid immersion depths of over 12” make these units suitable for comparison calibra ons of SPRT’s, industrial thermometers, and thermocouples in a wide temperature range (MSB-500-D 190° C to 500° C) (MSB-200-D ambient to 200° C) - all in a bench top in-strument. The MSB line of calibrators off er a short neck distance of 2.1” from the top of the neck to the actual fl uid. This short neck distance allows you to get your shorter sensors into the bath easily. And, the good ver cal uniformity in these baths makes it easier to perform calibra ons with all of your shorter sensors.

An intui ve touch screen allows for easy bath control, some prefi xed points are included for simple, fast and reliable setups. Communica on to a computer is easily accomplished through the use of an RS232 port on the side of the bath. Communica- on is typically accomplished through the use of a simple USB interface plugged into

the host computer. I-Tools is an easy to use program that allows for full bath control. These calibrators feature impressive start up mes; hea ng from ambient to 200° C in only about 90 minutes. Because of the fast heat up mes, you can perform more calibra ons. With this easy to use bath, hea ng rates greater than 2.6° C per minute allow the user to calibrate numerous points throughout the day; less than 75 minutes from 200° C to 400° C.

The tank on these baths is large enough to accommodate an op onal high tempera-ture equaliza on block which can further improve the stability and uniformity. Our high temperature equaliza on blocks are made from Stainless Steel and are custom-ized when needed. The typical block will have fi ve or more fl uid fi lled sensor wells, and is typically > six inches deep. For the MSB-200-D equaliza on blocks are available in Brass and Copper as well as Stainless Steel.

These baths are true laboratory baths, not drywells. While drywell calibrators off er some convenience, they do not off er the stability and repeatability of a s rred liquid bath. With this style bath there is no restric on on the number of holes drilled in the equaliza on block, no limits on the inser on length, and no need to worry about the size of the well hole to the diameter of the sensor being tested.

All MSB calibra ng baths are made from Stainless Steel. This metal surface was chosen in par cular because it is unaff ected by hot Salt or oil that may poten ally drip on the surface. The unit is easy to clean and off ers maximum protec on in terms of enclosures.

EDL’s line of MSB calibra on baths feature high stability and uniformity. This is largely a result of the advanced s rring system in the bath and the advanced engineering in the design and loca on of the heaters. These baths typically achieve a standard devia- on of ≤0.005 K=2.

All EDL calibra on baths are rigorously tested in our labs for stability and uniformity before they leave our facility. We even make shipping a breeze – because of the small size of the units they may be shipped by FedEx or UPS, no need for freight services.

All MSB calibrators ship with 2 moun ng plates on top of the bath, these plates are predrilled and threaded to accept up to 10 MSB-SUPPORT-POLE’s. These poles are designed to give support and allow ver cal adjustment for moun ng the MSB-S-CONNECTOR and the MSB-SENSOR-HOLDER. These accessories make it easy to mount your sensors into the bath. In addi on, these accessories allow you to quickly change and adjust the sensors in the bath. The MSB line of baths are available in 110Vac 50/60 Hz or 220Vac 50/60 Hz. You may request the cord confi gura on to match your home countries power requirement.

The MSB-500-D which uses Salt as the s rred media.Temperature: 190° C to 500° C

The MSB-200-D which uses Silicone oil as the s rred media. Temperature: Ambient to 200° C

Both of these baths feature ≤ 10mK stability and uniformity, with approximately 20 lbs. of media.

MSB Sensor Support PoleMSB-SUPPORT-POLE $45.00

MSB Sensor Holder ClipMSB-S-CONNECTOR $35.00

MSB Sensor HolderMSB-SENSOR-HOLDER $51.00

SALT149-18Low 149° C/ High 593° CThermal Conduc vity:0.33BTU/HR. SQ. FT., °F/FT18 kg (39.7 lbs)Price: .......... $252.00

SALT149-27Low 149° C / High 593° CThermal Conduc vity:0.33BTU/HR. SQ. FT., °F/FT27 kg (59.6 lbs)Price: .......... $364.50


Model Temperature Range PriceFUR-1200 300° to 1200° C Call For Pricing

The EDL Calibra on Furnace model FUR-1200 is designed for the tes ng and calibra on of both thermocouples and RTD sensors. Comparison calibra on is performed between 300 °C and 1150 °C.

The internal Inconel® equaliza on block produces a highly stable and uniform tempera-ture fi eld. This is ideal for high accuracy calibra on, long-term dri tests, and temperature cycle tests.

• Excellent for high accuracy calibration of both thermocouples & RTDs

• Internal Inconel® equalization block produces a highly stable & uniform temperature field

• Stability ±0.05 °C

EDL is proud to announce the introduc on of our new line of s rred liquid baths. The new Ultra-Bath from the metrology division at EDL incorporates a new design that is packed with features that facilitate quick, accurate, and easy calibra on.

The design and features of the Ultra-Bath line are the result of years of researching and using commercially available s rred liquid baths.

(s rred silicone oil or salt bath)

• Salt and silicone oil available• RS-232 interface• Independent high safety system• High, mid or low temperature option

Model Temperature Range PriceUB-4010 -40° to 100° C (Low Range)

Call For PricingUB-1020 100° to 200° C (Mid Range)

UB-2050 200° to 550° C (Salt)

Ultra-Bath S rred Silicone or Salt Bath

FUR-1200 Calibra on Furnace

Order Informa on

Order Informa on

The Temperature People®Since 1943 www.edl-inc.com | 1.800.342.5335

Electronic Development Labs, Inc.244 Oakland Drive | Danville, VA 24540F: 434.799.0847 | [email protected]

Electronic Development Labs Inc

V05132015_A

temperature product catalog - edl-inc.com

Documents