telewell vdsl2 toistin / pikaohje · pdf filestep 5. connect the single pair of telephone...
TRANSCRIPT
TeleWell VDSL2 TOISTIN / PIKAOHJE copyright © TeleWell Oy
Myyntipaketin sisältö TeleWell VDSL2 Toistin Muuntaja (syöttää virran etänä) RJ-11 jakaja Virtajohto Pikaohje
Laitteen tekniset merkinnät
Etupuoli Merkkivalot
Liittimet
Laitteiden kytkennät
Laitteen käyttöönotto Vaihe 1.
Asiakaspäässä muuntajaan kytketään kiinni virtajohto sekä RJ-11 jakaja
Vaihe 2.
Yhdistetään VDSL2 CPE-päätelaitteen Line-portista johto RJ-11 jakajan jompaan kumpaan porttiin
Vaihe 3.
Yhdistetään olemassa oleva DSLAM-yhteys (CO) RJ-11 jakajan toiseen porttiin
Vaihe 4. Optimaalisen tuloksen aikaansaamiseksi paikannetaan tilaajapään ja keskuspään keskikohta. Aseta TW-VDSL2-toistin mahdollisimman lähelle keskikohtaa
Vaihe 5. Yhdistetään yksi puhelinjohtopari CO-linkistä TW-VDSL2 toistimen “CO LINE” –liittimeen
Vaihe 6.
Yhdistetään yksi puhelinjohtopari CPE-linkistä TW-VDSL2 toistimen “CPE LINE” –liittimeen
Vaihe 7. Odota 3-5 minuuttia kunnes yhteys on muodostunut laitteiden välille Yhteystiedot http://www.telewell.fi
TeleWell VDSL2 REPEATER / QUICK START GUIDE copyright © TeleWell Oy
Package Contents TeleWell VDSL2 Repeater (2-Channel) Remote power feeding RJ-11 Splitter Power cord Quick Start Guide
Hardware Overview The front outlook The LEDs
The connectors
Hardware Connection
Hardware Installation Step 1.
At the customer site, connect the enclosed power cord and splitter to RJ-11 port of the Remote Power Feeder
Step 2.
Connect the WAN port of a VDSL2 CPE to either one of the two RJ-11 ports on the splitter
Step 3.
Connect the existing DSLAM Link(CO) to the other RJ-11 port on the splitter
Step 4.
Locate the mid-point between the subscriber and central office for optimal result. Place the VDSL2 repeater as close as possible to the mid-point within the total DSLAM to CPE loop.
Step 5.
Connect the single pair of telephone grade UTP wire from DSLAM(CO) link to terminal block connectors of the VDSL2 Repeater marked “CO LINE”.
Step 6.
Connect the single pair of telephone grade UTP wire from the CPE link to terminal block connectors of the VDSL2 Repeater marked “CPE LINE”
Step 7.
Wait 3 to 5 minutes for the Repeater to establish stable connections between
DSLAM and CPE. Check the LED status on VDSL2 Repeater.
Contact http://www.telewell.fi
Declaration of Conformity