telehealth client registration module--staff training
TRANSCRIPT
Introduction to Client Registration in the AMC Health Web Portal
With AMC Health, registering your clients into our system is an easy, interactive process
1
Table of Contents
2
Getting Started 3
Client and Provider Information 5
Saving Client Information 14
Client Monitoring and Insurance 16
Priority Limits and IVR Templates 21
Medications, Allergies and Hospitalizations 31
Assigning Care Managers, Priority Recipients and Additional Information 35
Completing Client Registration 38
Starting the Client Registration Process
Access the Administrative MenuClick on Registration/Referral
3
Registering a New Patient
Click here to start registration
4
For a client who has previously participated in telehealth, enter the
Client ID and click ‘Re-Register’
Select ‘division’ (usually your location)• The field is
customized according to your needs
• Not all organizations opt to identify clients by division
7
Company Division
Select the primary Client ID number. (In this case it is the Health Information Number). You may add a second number.The drop-down menu will prompt you for the type not already selected.
9
Client ID
The choice of designation is based on your organizational needs
Enter the client’s title, name, DOB, gender, primary language and spoken language
The pop-up provides a wide choice of primary languages
10
Client Information
Complete address: type, street, city, state, zip code and time zone
The Phone #1 must correspond to the number where the client can be contacted and devices will be installed.
If there is an alternate contact number, enter it and the type as Phone #2.
Recommended: entering Provider information….
11
Client Demographics
A provider can be the primary care physician, or any other type. • Enter last and first names, phone
numbers, email address• Select provider specialty (pop-up menu)• Check if provider is primary• Select if provider should receive
priorities, notes or both from the drop-down menu
• Click ‘Add’
Provider listings once completed can be edited or removedAny number of providers can be listed at any time
12
Provider Information
Do not make changes here.
To move to Page 2, click ‘Next’By doing this, all entered information will automatically be saved
13
Provider Information
At any time, after you’ve clicked ‘Save’, you will be brought to the Registration Page
You can review and print your client’s completed information
‘Edit’ will return you to the corresponding section
15
Setting up monitoring devices for the patient
It is on this page you select devices and connectivity for the patient, based upon their program, clinical requirements and home situation
• Select the modem and either the landline or wireless option• The blood pressure device, scale and glucose meter (if selected) need to be
identified for either a wired or Bluetooth connection• For blood pressure devices, the cuff size needs to be identified. The upper arm
circumference is noted in parentheses.
17
If Glucose Meter is selected, then Glucose Testing Information will be requested based on patient requirements and their current meter type
At a minimum, the following information needs to be completed before moving to the next page:• Insulin Dependent• Has Glucose Meter• Glucose Meter Type• Testing Frequency
18
Glucose Meter Selected
Entering patient insurance information
Enter insurance information: Type (in pop-up menu), Check if primary, member ID and group numberWhen completed, click ‘Add’
19
If a glucose meter is selected, this section needs to be completed
Glucose Testing and Insurance completed:
• Additional insurance types may be added
• Information on TelehealthInsurance Episodes is optional
• Click ‘Next’ to move to the next section: Priority Limits
20
Clinicians have the option of changing these according to understood clinical needs. Default is clinical parameters based on standard guidelines.
Understanding priority limits and setting up IVR
22
What appears on this page corresponds to devices selected and IVR
23
Target and priority ranges appear at default settings. They can be adjusted by clinicians based on each patient’s need.
If the scale is selected, the Delta Weight Priority Range is the default setting. Users have the option to select Delta Weight, Reference Weight, or both
Target and priority ranges
24
Setting up IVR Autofills with Phone # listed on page 1 of registration; if another number is to be used, enter information.
Enter phonetic spelling if name is unusual
Available Templates are pre-set by customer
25
Users have the choice of setting up number of call back attempts and timing :• Same day• Next day
Preferred language autofills with client’s selected language. One of three depending on customer setup
IVR Call Back Attempts
27
• Recurrence pattern: how frequently • Range of recurrence: select start and end dates, or number• Template type: if IVR is scheduled for a time, or after a
device is used (device triggered) and frequency• Click ‘Save’ to retain your selected information
Setting Scheduling Pattern
29
This is set as Daily (every 3 days), starting 3/15/2011 (does not end) and triggered by the device reading
Setting Scheduling Pattern
30
After IVR setup is completed, it is available for• Edit, view or to
trigger an IVR call directly
• Click ‘Calendar View’ to view template scheduling, or “Send Call Now’ to generate a call immediately
Click ‘Next’ to move to the next section, Medication, Allergy , Hospitalization List
IVR Setup Review
32
Medications, Hospitalizations, Time Away
Information in this section is usually entered by clinical staff. These fields are optional.
ImportantHospitalization and time away information cannot be entered prior to device installation and activation
34
Patient diagnosis may be added at time of registration. Select from the drop-down menu, add onset year (if known), check box if it is a primary diagnosis, then click ‘Add’
When completed
Click ‘Next’ to move to the next section, Case Managers & Patient Contact
36
Assigning Care Managers, other priority recipients All authorized care managers are listed for your organization. These may be assigned or reassigned based on patient need—click ‘Remove’ or ‘Edit’. • You may designate a care
manager as “primary” by clicking the box.
• You may designate who will receive priority/alert notification emails by checking the box.
If any additional (not already designated) people are to be notified of priorities, add them here
37
Adding other contact information and comments
Add alternative contacts such as family members or other caregivers here. Use drop-downs for phone type and relationship type
Add any pertinent comments about the client in this field. This may be related to device installation, days available, patient physical condition (e.g. ROM), limitations, name of caregiver to be present, etc.
This is useful information for clinicians and service support personnel to reach out to clients
By pressing ‘Save’ at the end of this page, the user is able to bring up a summary of all entered information
39
Review all patient information prior to final registration.Scroll down for complete record Click ‘Edit’ to correct or add.
Client Information Review
45
The patient record will not register if mandatory information is not completeThis is missing Client Address Type
Click ‘Edit’, save your work and use the Administrative drop-down, select Status Reports, click on Referred/Identi-fied Report. By the patient’s listing, click View/UpdateThis will return you to the Registration Page.
46
To complete registration:Return to top--click ‘Change Status” and select ‘Registered’ again to completeThe screen will reload and your work will be saved
Tip: To confirm if Registration is completed, click Change Status. Only the Registered option will appear.
Status Reports
In ‘Administrative’ on any page, drop down and click ‘Status Reports’
47
If you are looking for a client with a previously incompleted registration, use the Status Report
Click on ‘Referred/Identified Report’
48
Referred/Identified
Until clients are fully registered, all saved information can be found on the Referred/Identified Report
In the list of Referred Clients Reported, click on ‘View/Update’ for the patient (Mr. Platter)
49
To access this information
50
Returning to your registered client
• Select Status Reports in the Administrative menu at the left• Click on ‘Registered Report’ to view all Registered clients