telco test equipment - all trades · "a - z product solutions to trade and industry”...
TRANSCRIPT
“Service, Knowledge, Experience” A – Z Industry & Trade Solutions -Since 1995
Telco Test Equipment
Brochure 2018
ALL TRADES MFG PTY LTD; 11/5 HUDSON AVENUE CASTLE HILL NSW 2154
03/ 9780 4850
ALL TRADES MFG PTY LTD; 4/5 KELLETS ROAD ROWVILLE VIC 3178
02/ 8850 2700
www.all-trades.com.au
GX-2009
Four gas monitor with standard charger
R72-0306RKC24 monitor dimensions: 75mm x 70mm x 30mm
3m Hose and Sample Draw Pump
R81-1160RK-03
Calibration Cup/Sample Cup
R81-1107RK
Hard CarryCase 12 VDC Adaptor with Vehicle Plug
R49-2020RK
Complete Gas Detector KitGX-2009 Gas Detector, 3mt Hose & Probe,
240V charger, 12VdcCharger, and Carry Case
IN HOUSE CALIBRATION SERVICE AVAILABLE!
See below if you wish to order separately
ALTAIR 4X MULTIGAS DETECTOR
The ALTAIR 4X Multigas Detector surpasses industry standards in several crucial areas. Its
four-year sensor life is 60% longer than the industry average, while its 24-hour run time exceeds
the industry average by 71%.
This versatile portable detector is a perfect match for the utility industry, and its digital sensor
output makes it less likely to suffer from RF interference. The unit features exclusive
MotionAlert™, which lets others know if the user has become immobile, and InstantAlert™, a
manual alarm that alerts others of potentially dangerous situations. This rugged unit is designed to
withstand a drop of up to 20 feet and uses less than half as much calibration gas as the industry
average.
"When purchased in kit form the user can perform and print their own calibration certificates if needed, as well as carry out regular bump testing"
Ordering info;MSA-10110447 - detector only
MSA-10110447K - detector, charger, cal gas, regulator & case
MSA-10110447KP – detector, charger, cal gas, regulator, aspirator tube & carry case
•
FEATURES:
• Two-way Speakerphone
• ADSL Compatible
• Meter Pulse Detection (Option)
• Detection and Lockout of
Data Services: T-1, E1,
ISDN (BRI and PRI), SW56,
xADSL, HDSL
Built-in Ringer with
Adjustable Ring Tones
• 10 x 32 digit Speed Dial
Memory
• Last Number Redial
• Microphone Mute
• Easy-to-use Talk and Monitor
Keys
• Audible and Visual Mode
Indicators
• Line Polarity Test in any Mode
• Digital Safe Line Monitor
• Speaker Volume Control
• Unique ‘Quick Release’ Belt
Clip
K EY SPECIFICATIONS:
• Award Winning Waterproof Design
• Works dial tone on ADSL lines
• High Voltage protection with alarm
• Safe around digital services
TEL-D361
P R O D U C T D E S C R I P T I ON
In today’s evolving world of communications, technicians encount er an ever increasing amount of data on copper lines.
Whether installing, servicing or simply maintaining voice servi ce, the technician must consider the possible presence of digital
traffic. Tempo’s D361 Test Sets offer the latest in data protection, allowing technicians to test the POTS service on a live ADSL
line without fear of bringing down the data service.
With this innovative design, Tempo continues on the cutting edge of but t-in test set technology, setting new, unmatched
standards in both quality and custome r satisfaction. Our test sets give new meaning to the term “weatherproof” with an award-
winning, waterproof ca se design that allows technicians to operate with confidenc e in even the most extreme weather
conditions. Other key advancements include a high-volt age alarm and a quick release, non-metallic belt clip comp osed of
Verton® RF, a strong, lightweight structural composite. This combination of rugged technology enab les Tempo to offer the best
warranty in the industry - 3 years.
ADSL Compatible Telephone Test Set
"TELSTRA APPROVED"
D361 alarms & does
not loop the line.
This mode cannot be
overridden.
D361 alarms & does
not loop the line.
This mode can be
overridden.
D361 loops the line.
SPECIFICATIONS:
5 k ohm
10 mA
300 ohm
Electrical:
Loop Limit:
Minimum Loop Current:
Maximum Off-hook DC Resistance:
Minimum DC Resistance in Idle,
Monitor and Lockout:
Minimum AC Impedance in Monitor:
Span Power Lockout Range:
10 M ohm at 300 Vdc
400 k ohm at 1 kHz
120 Vdc minimum
450 Vdc maximum
10 pps +/- 0.1 pps
60/40% +/- 1%
800 +/- 50 ms
-6 dBm nominal
+/- 1% maximum
2 dB +/- 1 dB
100 ms nominal
PULSE (Rotary) Dial:
Pulse Rate:
Break/Make:
Interdigit Interval:
DTMF Output:
Tone Level:
Tone Frequency Error:
Tone Twist:
Flash Duration:
Memory dialling:
Stored Number Capacity:
Stored Number Length:
10 plus last number
redial
32 digits per stored
number
4 secondsPBX Pause:
POWER SOURCE:
9Vdc Alkaline Battery Life:
Low Battery:
Auto Shut-off:
3 months nominal
30 hours of continuous
loudspeaking
Visual and audible indication
5 minutes with no line DC
20 minutes with line DC
ENVIRON MENT
Operating Temperature:
Storage Temperature:
Water Resistance:
Physical Shock:
-29º F to 140º F
(-34º C to 60º C)
-58º F to 167º F
(-50º C to 75º C)
IP67 per IEC 60529
(submersion in one
metre of water for 30
minutes)
20 foot drop test onto
concrete Bellcore
TR-TSY-000344
Physical:
Length:
Width:
Height:
Weight:
Warranty:
9.75in (248mm)
2.75in (70mm)
3.375in (86mm)
1.32lbs with battery
Three Years
ORDERING INFOR M ATION:
Part Number
M0401/10
M0401/12
Description
DigAlert 361, ETSI Compliant,ADSL Compatible, 2 Way Hands Free
DigAlert 361, ETSI Compliant, 12kHz Meter Pulse,
ADSL Compatible, 2 Way Hands Free
M0023/16 DigAlert 361 Ground Start Cordset
D361 ADSL Compatible Telephone Test Set
Novel circuit design takes account of the diverse
conditions found on modern distribution line plant
D E S C R I P T I O N .
The Alert 340 Test Telephone incorporates all the Nautilus design features that provide a durable and robust instrument for
applications where DigAlert™ circuit technology is not required or necessary.
Digital Services Protection (DSP) Test Telephones are designed to operate safely in situations where telephone wiring may
be carrying Digital traffic, Voltage feed to remote electronics or Hazardous voltages that result from fault conditions or
misuse of the cable. The Alert 340 also features loud-speaking (listen only) capability.
• Loudspeaker listening
• Volume boost
• Microphone mute
• Confirmatory key beeps
• Talk/Monitor status LED
• Battery low audible tone
• Tone/ pulse
• Redial (10x24 memories)
• Flash
• Pause
• Super Hi Zpolarity
• Super Hi Zmonitor
• High monitor level
• Warble ringer
• Selectable ringer tones
• High impact resistance
• High chemical resistance
• Quick change cord
• Quick change battery
• Easy shoulder placement
• Rugged belt clip
Digital Services Protection (DSP)
In the “on hook” mode, on connection to a circuit, the Test Telephone sounds an alarm to alert the user to the presence of voltages
above 75V DC. Such voltages are normally present on circuits carrying digital services. If the circuit is active, the user can select the
high impedance MONITOR mode and listen to the sound to determine if the circuit is carrying digital services without disrupting the
traffic.
Selecting “off hook” mode will stop the alarm signal and loop the line without damage to the test set. If the alarm signal
persists, it indicates that the voltage on the line is above 120V. In this case the line is not looped avoiding damage to the test set
as well as alerting the user to the presence ofhazardous voltages.
Alert 340 Test Telephone withDSP
ITEM CODE; TEL-TEMPO340
Code: ATM-CZ20252 Contractor’s Test Phone
Designed for line installers, repair technicians and other authorised personnel for telecomms line testing and temporary communications.
Performs all functions of a base level Buttinski and has added features such as speaker phone, 13 number memory, and is “Quickswitch” ready for connection to Krone, Siemens, Madison and many other termination blocks.
Voltage testing, polarity and a high impedance monitor make this phone suitable for everyday use on today’s modern networks.
Weather and particle resistant to IP54, lightweight and rugged, the CZ20252 is ready to
perform everytime. Dimensions: 230mm x 82mm x 89mm. Weight; 0.63kg
Protection: 240Vac Battery: 9V
Loop Limit: 2k Ohm / Talk: 300 ohm typical/ Monitor: 39k Ohm Nom @ 1kHz/ IP54/
Meets safety standard AS/NZ 60950:1:2015
Great Value!!
Intuitive on-screen menus make
the RD7000+ easy to setup and provide easy access to advanced
features
High contrast LCD with auto-backlight
Base tray for accessories
High contrast LCD with
auto-backlight
Ergonomic
robust ABS case
High visibility reflective safety arrows
Powered by 2 x NiMH or
alkaline LR20 (D-Cell) batteries, or optional
rechargeable battery pack
Accessory/USB
connections
Headphone connection
Splash-proof keypad
Compass orientation display
Splash-proof keypad
Ergonomic robust ABS case
IP54 environmental protection
“Data loggingfeatures
Available”
Power IndustryThe RD7000PL+ identifies the target cable reliably, even in areas of
large-scale, trunked cable deployment of complex electrical networks.
One of the biggest challenges to operators working in the power industry is locating
pipes and cables when operating near high voltage environments, such as substations
and conduits where the presence of large signals overpower most locators.
The RD7000PL+ is designed for use in areas where excessive magnetic fields,
generated by high voltage equipment and cables, can prevent accurate locating.
Dynamic Overload Protection reduces this effect, allowing uncompromised locator
accuracy.
The RD7000PL+ has both Peak and Null modes and also a combined Peak/
Null mode which allows the identification of signal/ground distortion effects by
displaying both Peak and Null response simultaneously.
In addition, the RD7000PL+ can indicate depth in Power mode. This is particularly
useful when direct connection of a transmitter to a power cable may be hazardous
or impractical. The Compass feature aids correct alignment with the target cable,
maximising depth measurement accuracy.
The 8kHz Fault Find function is a technique that locates a cable sheath fault using
an A-frame attached to the Locator. On-screen arrows help show the fault’s
direction and help the operator locate the fault accurately to within 10cm (4").
Model No. RD7000PL+
Passive Frequencies:
Power
Radio
Active Frequencies:
512Hz
640Hz
8kHz
33kHz
65kHz
Sonde Frequencies:
33kHz
Features:
Compass
Dynamic Overload
Protection
TruDepth™
Peak mode
Depth in Power mode
8kHz Fault Find
Null mode
Peak/Null mode
StrikeAlert™
Centros™
eCAL™
Telecom IndustryLarge bundled pairs of cables require specialized location equipment
to find a selected signal.
As the Telecommunication utilities continue to deploy highly insulated copper or
fiber cables, tracing bundled cables becomes harder. The RD7000TL+ features
additional high locate frequencies capable of pinpointing high impedance cables to
help address this problem.
Most domestic telecom cables have no earth but are sheathed; using high
frequencies allows tracing without needing to ground connections. Once the
correct pipe or cable is located, the operator can accurately locate any cable
sheath faults to within 10cm (4") meter using 8kHz Fault Find mode with a
Radiodetection A-Frame.
The RD7000TL+ has both Peak and Null modes and also a combined Peak/
Null mode which allows the identification of signal/ground distortion effects by
displaying both Peak and Null response simultaneously.
Featuring Compass and Dynamic Overload Protection as standard, the
RD7000TL+ aids cable and pipe location even in electrically noisy environments,
while the addition of three sonde frequencies adds more capability and flexibility.
Model No. RD7000TL+
Passive Frequencies:
Power
Radio
Active Frequencies:
512Hz
640Hz
8kHz
33kHz
65kHz
131kHz
200kHz
Sonde Frequencies:
512Hz
640Hz
33kHz
Features:
Compass
Dynamic Overload
Protection
TruDepth™
Peak mode
Null mode
Peak/Null mode
8kHz Fault Find
StrikeAlert™
Centros™
eCAL™
“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995
oPit Lid Locator
"A - Z Product solutions to trade and industry”
ORDERING INFO
AD300A – PIT LID LOCATOR - HIGH PERFORMANCE LOW COST LOCATOR USED BY TELSTRA AND WATER UTILITIES.
7
DON’T FORGET WE SUPPLY CIVIL SAFETY EQUIPMENT!We are able to put together package or customised civil safety products to suit your particular needs. Products are supplied from leading Australian and overseas manufacturers to ensure that we provide you with quality merchandise
TRAFFIC CONES PORTABLE TRAFFIC SIGNS SAFETY DIGGING AND HOLING TOOLS BARRIERS RESCUE EQUIPMENT SAFE ENTRY BARRIER TAPES & MESH
“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995
o Loop a Line kit
"A - Z Product solutions to trade and industry”
ORDERING INFO
TEL-TX916 – LOOP A LINE KIT
IDEAL FOR NEW SERVICE INSTALLS & REPAIRS IDENTIFY THE PAIR AND CONTROL THE LINE
TERMINATION AT THE OSCILLATOR FOR :-Open Circuit, Connect ServiceShort Circuit, 600 Ω Quiet LinePair Short Circuit Detection
8
o Lines Test Set # 2
ORDERING INFO
ATM-CZ1000 – CABLE PAIR IDENTIFIER “F SET”
INDUSTRY STANDARD FOR 25YEARS MULTI-WAY LEAD SET WITH KRONE,RJ AND CLIPS LINE POLARITY INDICATION. 240V MAINS PROTECTED CARRY CASE
o Cable Pair Identifier
ORDERING INFO
MAS-LTSN2 – LINES TEST SET NUMBER 2
2 WAY SPEAKERPHONE WATERPROOF DESIGN WORKD DIAL TONE ON ADSL LINE HIGH VOLTAGE PROTECTION WITH ALARM SAFE AROUND DIGITAL SERVICES
o Cable Gauge
ATM-CZ20050 – CABLE GAUGE 750M
MEASURE LENGTH TO 750M EVEN IF CABLE IS BOXED
MEASURE VOLTAGE TO 250V
“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995
oTraceable Rodders – 4.5 & 6mm O/D
oTraceable Rodders – 9 & 11mm O/D
"A - Z Product solutions to trade and industry”
ORDERING INFO ATM-45TR60 – RODDER &FRAME – 4.5MM X 60MTR ATM-45TR80 – RODDER & FRAME – 4.5MM X 80MTR
ATM-6TR100 – RODDER & FRAME – 6MM X 100MTR ATM-6TR120 – RODDER & FRAME – 6MM X 120MTR
ACCESSORIES ATM-SL4.5 – FLEXIBLE LEADER – 4.5MM ATM-SL6 – FLEXIBLE LEADER – 6MM ATM-4.5JK – REPAIR KIT FOR 4.5MM ATM-6JK – REPAIR KIT FOR 6MM
DIMENSIONS ATM-45TR60 – 560 X 180 X 370 - 3.5KG ATM-45TR80 - 560 X 180 X 370 – 4KG ATM-6TR100 - 620 X 190 X 510 – 7KG ATM-6TR120 - 620 X 190 X 510 – 8KG
ORDERING INFO
ATM-9TR125 – RODDER & FRAME – 9MM X 125MTR ATM-9TR150 – RODDER & FRAME – 9MM X 150MTR
ATM-11TR200 – RODDER & FRAME – 11MM X 200MTR ATM-11TR250 – RODDER & FRAME – 11MM X 250MTR
ACCESSORIES ATM-SL9/11 – FLEXIBLE LEADER – 9MM ATM-SL9/11 – FLEXIBLE LEADER – 11MM ATM-9JK – REPAIR KIT FOR 9MM ATM-11JK – REPAIR KIT FOR 11MM
DIMENSIONS ATM-9TR125 – 920 X 185 X 510 - 32KG ATM-9TR150 - 920 X 185 X 510 – 36KG ATM-11TR200 - 1150 X 500 X 1000 – 50KG ATM-11TR250 - 1150 X 500 X 1000– 18KG
!! ABOVE ROD LENGTHS ARE THE MOST COMMONLY SOLD !!
13
As well as stocking a large range of popular Telco test equipment, We also have a range of accessories, tools, and product services.
For example –
Replacement Test Leads and repair services if required.
Test hardware such as Proving Mandrels, Safety Fuses etc.
Inhouse Calibration and repairs for Gas Detectors
Terminating, splicing, cutting and stripping tools of all types
Flexible Payment plans for big ticket items or package deals
“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995
AT ALL TRADES WE PRIDE OURSELVES ON PROVIDING QUALITY SERVICE WITH QUALITY PRODUCTS –
REMEMBER IF YOU DON’T SEE WHAT YOU NEED IN THIS BROCHURE, PLEASE CALL OR EMAIL US WITH YOUR ENQUIRY.
IN ADDITION TO OUR TEST EQUIPMENT RANGE WE ARE ALSO PROVIDE A-Z PRODUCT SOLUTIONS IN : -
• Battery and Hand Operated Crimping and cutting equipment used by Utilities and electrical contractors
• Cable Pulling equipment and accessories• Height & Safety equipment ( B-SAFE, Honeywell, MSA ,SALA
,FERNO and more )• Electrical Test & Measurement products• Dewalt,Milwaukee, Stanley Power Tools• Quality Tradesman Hand tools ( Sidchrome, Crescent, Stanley
etc )
AND MUCH MORE
2
Rodding Truck circa 1920’s