technologies - voipacwlan board wireless ieee802.11b (11mbit), (optional 802.11a / 802.11g) wireless...
TRANSCRIPT
Company profile
2011
Technologies
Company history
• 1996 – Voipac, s.r.o., with focus at VoIP technology was established.
• 2002 – Voipac company has began to focus at development ofcustomer-driven SW and HW solutions in the area of telecommunications.
• 2003 – Besides telecommunication solutions, company has broadenedits range of its activities by entering the area of automatization,automotive and information technologies.
• 2004 – New projects launched – DVB-T Set Top Box, Car NavigationSystem with DVD and TV (Analog/DVB-T).
• 2005 – New projects of PXA270 200pin DIMM Module and base board, PNI module launched.
• 2006 – Transformation of Voipac, s.r.o. into a new joint stock companyVOIPAC TECHNOLOGIES a.s.
Company’s range of activities
Embedded Solutions
Customized
HW&SW Development Service & Support
Consumer electronics
PXA255 Development Kit
DIMM Module
DIMM Base Board
STN Display
with touchscreen
JTAG Cable
Source Codes
Applications
Schemes
PXA255 DIMM Module
Intel® XScale® Core Processor PXA255 200/400MHz
FLASH 8 - 16 - 32MB
SDRAM 16 - 32 - 64MB
Audio AC97
Touch screen support
DIMM 144 connector
Power supply 3.3V
OS Linux preinstalled
Win CE BSP
May -June 2003
PXA255 DIMM Base Board
CPU Intel® XScale® PXA255
2 x 100Mb Ethernet
2 x PCMCIA slot
1 x Compact Flash socket
1 x IDE connector (ATA2 interface for
HDD or CDROM)
in real time can work:
- 2 x PCMCIA
- 1 x PCMCIA + 1 x Compact Flash +
1 x IDE
RS232 connector (terminal output)
Connectors for STN Hitachi and TFT
Sharp displays
Touch screen interfaceSeptember 2003 -January 2004
PXA255 DIMM Base Board
IR serial interface
SPI interface
Header for USB 1.1 client
UART serial connector (3.3 - 5V)
JTAG connector
AC97 audio (stereo LINE IN/OUT,
MIC IN)
2 x PS/2 - mouse and keyboard -
controller
Real Time Clock battery backup
RESET switch
9 - 30V power supply
Power through Ethernet cable
support
September 2003 -January 2004
PXA255 Dev. Kit – STN Display
STN Display Hitachi with
touch screen
Display size: 14cm (5.7”) Diagonal
Resolution: 320 x 240 dots
Power Supply Voltage: 3.3V only
PXA255 Dev. Kit - JTAG Cable
For program burning
into FLASH memory
It is used together with
JflashMM program.
ArmBoot as a basic
bootloader with
implemented functions
Useful and simple to
work with
November 2003
PXA255 Dev. Kit - Support
Free Web Support available on web site
- related articles (how to prepare source codes, connect
various peripheries and work with them, etc.
- includes forum with frequently asked question (FAQ)
- download area with documentation, schemes, source codes, etc.
Additional support (allows for rapid shortening of the product
development period)
- Individual Voipac HW specialists support
- SW troubleshooting support
µPC Board
Intel® XScale® Core Processor PXA255, 200MHz
FLASH 16/32MB
SDRAM 32/64MB
2 x 10Mb Ethernet
RS232 and UART 3 - 5V connector
JTAG connector
Audio AC97 (Optional) – stereo line
IN/OUT, Stereo headphones output
FLASH-erase-protection switch
Reset button
Power supply 7.5V (5.5x2.1 mm connector)
October -December 2002
ISDN Gateway
February 2003
Interconnects ISDN network
and IP network
H.323 stack implemented
Codecs G.711, G.723,
G.729 supported
Two-way communication:
– ISDN dialing client
– ISDN incoming calls
acceptance server
LANRS-232ISDN1
PSTN
ISDN2
NetGate Server
Intel® PXA255 / 200MHz Processor
16 MB FLASH memory
64 MB SDRAM memory
2 x 10Mb Ethernet
RS232 connector, output to terminal
FLASH-erase-protection switch
Power LED
Power consumption up to 5W
Size: 100 x 107 x 27 mm
Temperatures: 0°C to +70°C (commercial
version)In production since March 2003
NetPhone 210
Intel® XScale® Core Processor PXA255 - 200MHz
2 x LED
Full graphics display (128 x 64 dots)
FLASH 8 MB / SDRAM 32 MB
29-button keypad
2 x 10Mb Ethernet
Headset connector
Speaker
PS/2 interface for external keyboard
Power 9 - 40V
In production since October 2003
USB Phone 120
Built-in DTMF
Own ringer
H.323 compatible PC Phone client, supporting
Gatekeeper, H.245 Tunneling, Fast start and
H.245 in setup
USB 1.1 compatible
All Internet connections compatible: Dial UP
modem, ISDN, LAN xDSL, Cable modem and
leased line
Supported compressions: G.729A, G.723.1, G.711
uLaw, G.711 Alaw, MS-GSM, GSM-06.10, LPC-10
No need for external power source
Integrated sound cardIn production since October 2003
Ypsilon adapter
x51 architecture USB microcontroler
PSTN interface based on ProSLIC
Special equipment enabling
redirecting of call from the
Internet using a PC to common
telephone device connecting
to PSTN.
July 2002 -September 2003
USB
chip
USB
Switch 1
PHONE
LINE
Off-Hook
Detector
SLIC chip
Analog
Interface
Fayn Solution
Voipac Softswitch
E-commerce web portal
Network Operating Center (NOC)
Billing, Admin Module
Terminal equipment (Start Pack)
Implementation service
Customization
Voipac SW Client 1.0 - SW
• Registers to Voipac solutions
• Supports IP to IP or IP to PSTN (GSM, ...) calls or point-to-point to any H.323 client
• Uses USB Phone or sound card
• OS: Windows 98+, Windows 2000+
• Supports codecs: G.723.1, G.729A, GSM-06.10, MS-GSM, G.711-uLaw, G.711-ALaw, LPC-10
• Supported video codecs:H.261, H.263
• Minimal HW configuration: CPU 300 MHz, 64MB RAM, soundcard or USB port PSTN.
Voipac Softswitch
Dynamic call routing
Subscriber management
Password or static IP address authentication
Real time category matching
Call charging
Load balancing on call
routes resulting in faster
and more reliable
communication
Testing Board - ISDN Gateway
• Intel® XScale® Core Processor
PXA255 / 400MHz
• 32MB FLASH / 64 SDRAM
• Audio, Ethernet
• 2 x ISDN Line
February -March 2003
Procesor PXA 250
PowerISDN
Controller 1ISDN
Controller 2
Interfaces:RS-232
UART, SSP
FLASHMemory
SDRAMMemory
EthernetController
Testing Board - Universal Board
Intel® XScale® Core Processor
PXA255/400MHz
32MB FLASH / 64 SDRAM
Audio, Ethernet
2 x PCMCIA
1 x Compact Flash
1x IDE
April -May 2003
Mobile gas station
Intel® XScale® Core Processor PXA255/400MHz,
32MB FLASH, 64MB SDRAM
Display Siemens 640 x 480 dots (10.5’’)
10Mb Ethernet
CF slot, Audio
Full UART shared between RS232 and
GSM/GPRS
GPS, CAN, RS485
Keypad input
OS Linux
Build-to-order board designed for explosive
environment, with extended temperature range
June -August 2003
XOT Terminal Adapter - SW
Voipac DIMM Module Core
- Intel® Xscale PXA255 200MHz Processor
- 8MB FLASH/16MB SDRAM memory
Customer-build base board
- 1 x 100Mb Ethernet
- 2 x NT/TE ISDN interface
- 1 x RS232
- Power supply 9V
- Dimensions 100 x 120mm
- SW - Linux 2.4.19/2.6.7
- 2 x ISDN S0 interface NT/TE mode
- X.31 to TCP
June -August 2004
WLAN Board
Wireless IEEE802.11b (11Mbit),
(optional 802.11a / 802.11g)
Wireless LAN Access Point /
Station Adapter / Ad-Hoc
2 modes - bridge and router
OS LINUX
Intel RISC 32bit processor PXA255
1 Ethernet port 10/100Mbit (RJ45)
1 PCMCIA slot
PPPoE and PPTP Support
Fixed or Dynamic IP address
Packet’s prioritization (voice, SSH, J)
Virtual LAN – IEEE 802.1Q
December 2004
WLAN Board
VPN Support (IP Sec)
WEP Support
Access Control
DHCP Server
Password Protected Configuration
NAT
Statefull Inspection Firewall
Radius support
QoS (Shaping) + QoS for NAT
Easy to install set up
Power LAN 24V – power through Ethernet
cable support
Possibility to change WLAN PCMCIA card
December 2004
CAR PC – Navigation system
Functional description:
CD, CDR, MP3, DVD Player
Navigation system
Radio, TV Tuner (analog/DVB-T)
Power Supply – 11-24V - Permanently via
car battery or Cigarette plug
OS - Windows 2000/XP, Linux
HW Specification
Processor VIA C3 EBGA
(from 400MHz – 1GHz)
CLE266 North Bridge
VT8235 South Bridge
256MB on board DDR266
1x miniPCI
20GB HDD
2x USB 2.0
November 2004 –September 2005
CAR PC – Navigation system
1x ATAPI50 connector
NAND FLASH on board memory
2x serial line
4x45W Audio amplifier
1x IR remote controller
Award BIOS / Linux BIOS
2x PS2 (Mouse and Keyboard)
Audio IN / OUT
1x 100Mb Ethernet
TV OUT
Video capturing
VGA connector
Size 170 x 170mm
November 2004 –September 2005
DVB-T/S Set top box
Processor STx5105ALB
DVB-T/MPEG-2 Compatible
Input Frequency Range: 174~~~~230, 470~862MHz VHF&UHF
IF Bandwidth: 7 or 8MHz
Input impedance: 75Ω
Video decode: ISO/IEC13818-2
MPEG2 (MP@ML Compatible)
Video resolution: 720××××576
Video code rate: 15Mbit/s Max.
RF Input::::IEC-type, Female
RF out: IEC-type, Male
Double Scart (one for TV & one for VCR)
1 x RCA video output
2 x RCA audio output
1 x Coaxial digital audio outFebruary 2005 –November 2005
1 x RS 232 serial connector
1 x Optical digital audio output (optional)
English, Czech and Polish OSD andEPG
PNI Module
Intel® XScale® Core Processor PXA255/200-400MHz
FLASH 8 - 16 - 32MB
SDRAM 16 - 32 - 64MB
Ethernet CS8900 (10Mbit)
Real time clock
Watchdog
JTAG connection directly from
PNI module board
Linux 2.4.19
File-System: JFFS2
Drivers:
Serial 1 RS232
Serial 2 TTL logical
Ethernet CS8900
January 2006 –March 2006
PXA270 DIMM Module
• Core Processor PXA270 (scalable up to 624 Mhz)
• FLASH 8 / 16 / 32 / 64 MB (16bit)
• SDRAM 8 / 16 / 32 / 64 /
128 / 256 MB (32bit)
• 10/100 Mbps Ethernet (32bit)
• Audio AC`97 with touch controller
• TFT/STN controller (800x600 18bit)
• DIMM 200 pin connector
• 1x USB dedicated host
• 1x USB 2.0 OTG host/device
• 3x Serial and SSP port
• I2C bus
• PCMCIA/CF, MMC/SD
• Power supply 3.3V with flexible PMIC
• Commercial/ext. temperature range
• Dimensions: 67.6 x 38.0mm
• OS Linux 2.6 / WindowsCE 6.0(Optional)
June 2005 –November 2006
PXA270 DIMM Base Board
1x USB 2.0 OTG host/device
1x USB dedicated host
1x 100Mb Ethernet
1x PCMCIA slot
1x Compact Flash socket
1 x IDE connector
(ATA2 interface for HDD or CDROM)
2x PS2 mouse and keyboard controller
1x RS232 connector (terminal output)
AC97 audio (stereo LINE IN/OUT, MIC IN)
Touch screen interface
Real Time Clock battery backup
JTAG connector
RESET switch
9 - 30V power supply (12V recommended)
December 2005 –December 2006
PXA270 Dev. Kit - Displays
TFT Display Hitachi with
touch screen
Display size: 14.5cm (5.7”) Diagonal
Resolution: 640 x 480 dots
Power Supply Voltage: 3.3V only
TFT Display DataImage with
touch screen
Display size: 17.8cm (7”) Diagonal
Resolution: 800 x 480 dots
Power Supply Voltage: 5.0V only
PXA270M DIMM Module
• Core Processor PXA270M (scalable up to 624 Mhz)
• FLASH 64 / 128 / 256 MB (16bit)
• SDRAM 8 / 16 / 32 / 64 /
128 / 256 MB (32bit)
• 10/100 Mbps Ethernet (32bit)
• Audio AC`97 with touch controller
• TFT/STN controller (800x600 18bit)
• DIMM 200 pin connector
• 1x USB dedicated host
• 1x USB 2.0 OTG host/device
• 3x Serial and SSP port
• I2C bus
• PCMCIA/CF, MMC/SD
• Power supply 3.3V with flexible PMIC
• Commercial/ext. temperature range
• Dimensions: 67.6 x 38.0mm
• OS Linux 2.6
JTAG Cable with serial line
Based on FT2232D chip
USB2.0 (full-speed, 12Mbits/sec)
JTAG Baudrate up to 6Mbits/sec
JTAG signals from 1.65V to 5.5V
ARM Multi-ICE 20-pin header compatible
USB Hot-Plug / JTAG Hot-Plug
For program burning into the FLASH memory
For quick
- debugging
- programming
- testing
Includes RS232 interface
Operates with OS Linux and Windows
i.MX25 Development kit
i.MX25 (Freescale) SODIMM Module, up to 400MHz, ARM9
i.MX25 SODIMM Base Board
Aluminium Case
Support CD with Documentation
JTAG Cable with Serial Line
Serial Port Cable
Crossover Ethernet Cable
200pin SODIMM Socket
Pitch Compression Connector
OS Linux 2.6 /
WinCE 6.0 / Android 2.3
i.MX51 Development kit
i.MX51 (Freescale) SODIMM Module, up to 800MHz, ARM Cortex A8
i.MX25 SODIMM Base Board
Aluminium Case
Support CD with Documentation
JTAG Cable with Serial Line
Serial Port Cable
Crossover Ethernet Cable
200pin SODIMM Socket
Pitch Compression Connector
OS Linux 2.6 /
WinCE 6.0 / Android 2.3
Contact
VOIPAC TECHNOLOGIES a.s.
Dolny Sianec 18B, 911 01 Trencin
Slovak Republic
Tel.: +421 32 3810821
E-mail: [email protected]
Web site: http://www.voipac.com