techno elastomer-hinged wafer-style check valvesfulfillment.directedje.com/directresources...2...
TRANSCRIPT
TECHNO Elastomer-Hinged Wafer-Style Check ValvesLow pressue loss, lightweight design with compact construction
1
TECHNO ELaSTOmEr-HiNgEd WafEr-STyLE CHECk VaLVES
Introduction ........................................................................................................ 2
Features .............................................................................................................. 3
TECHNO Check Styles 5412, 5118, 5355 and 5355-316 ..................................... 4
TECHNO Check Style 5296 ................................................................................. 5
Pressure Drop Charts for Water and Air Service ................................................... 6
CAMSERV Aftermarket Services for Valves and Actuation .................................... 7
Trademark Information ....................................................................................... 8
Weights by Model ............................................................................................... 8
Table of Contents
2
TECHNO Elastomer-Hinged Wafer-Style Check Valves
Cameron is a leading provider of valves, valve automation and measurement systems
to the oil and gas industry. Our products are primarily used to control, direct and
measure the flow of oil and gas as it is moved to refineries, petrochemical plants and
industrial centers for processing.
We provide valve products that are sold through distributor networks worldwide for use
in both oil and gas and industrial applications, and include widely recognized brands such
as DEMCO®, NAVCO®, NEWCO®, NUTRON®, THORNHIll CRAVER®, TECHNO™,
TOM WHEATlEy®, WHEATlEy® and WKM®.
The design features of Cameron’s TECHNO elastomer-hinged and metal-hinged check
valves include a tight shut-off feature. TECHNO check valves are known for their ease of
maintenance and exceptional flow characteristics. Cameron provides economical and
dependable TECHNO elastomer-hinged wafer-style check valves for use within a wide
range of service conditions.
Oklahoma City, Okla., USa
3
fEaTUrES
Non-Slam Quick Closure feature The valve plate design reduces travel from fully open to fully closed position and offers complete metal-to-metal valve plate structural support.
Unique flexible Elastomer SealContinuous elastomer seal provides closure around valve bore with the strength and durability to ensure prolonged cycle life.
Clamp Plate Support
Cameron’s TECHNO line has been a leading supplier of high-quality check valves to the industry for many years. A large number of TECHNO products are presently in service, demonstrating a superior performance record.
The TECHNO check valve design, combined with an extensive selection of materials, results in high performance and reliability for most liquid and gas applications.
The elastomer-hinged TECHNO wafer-style check valve offers compact design along with heavy-duty construction.
The scalloped body design ensures proper and easy alignment between mating gaskets and line flanges. It offers strength and reduces the need for expensive supports, expansion joints and foundations that may be necessary with a conventional check valve.
Our unique design, combined with years of experience, allows us to satisfy some of the most difficult applications.
Other configurations are available upon request.
design features
• The stationary hinge-post and hinge-clamp design reduces wear to hinges, pins, valve seats, springs and the need
for routine maintenance.
• The valve plate design reduces travel from a fully open to fully closed position and provides complete metal-to-metal
valve plate structural support, resulting in a non-slam, quick closure feature.
• Our unique flexible elastomer seal provides final closure around the valve bore with continuous strength and
durability to ensure prolonged cycle life, outwearing traditional metal-seated valves.
4
TECHNO CHECk STyLES 5412, 5118, 5355* aNd 5355-316
Valve Size (in.) a B C d E f
2 1-3/8 4-3/4 1/2 3/8 4 4-3/4
2-1/2 1-5/8 5-1/2 9/16 3/8 4 5-1/2
3 1-7/8 6 11/16 3/8 4 6
4 2-3/8 7-1/2 7/8 3/8 8 7-1/2
5 2-7/8 8-1/2 1-1/8 7/16 8 8-1/2
6 3-3/8 9-1/2 1-1/2 7/16 8 9-1/2
8 4-3/8 11-3/4 2-1/4 7/16 8 11-3/4
10 5-3/8 14-1/4 2-1/2 1/2 12 14-1/4
12 6-3/8 17 3 1/2 12 17
14 7-3/8 18-3/4 3-1/4 9/16 12 18-3/4
16 8-3/8 21-1/4 3-3/4 9/16 16 21-1/4
18 9-3/8 22-3/4 4-1/4 5/8 16 22-3/4
20 10-3/8 25 4-3/4 5/8 20 25
24 12-3/8 29-1/2 5-3/4 11/16 20 29-1/2
30 15-3/8 36 7-3/4 11/16 28 36
36 18-3/8 42-3/4 8-1/2 13/16 32 42-3/4
*for sizes 2“ to 8”, see Style 5296 on page 5.all dimensions are in inches.for weights by model, see page 8.
General Dimensions for Styles 5412, 5118, 5355* and 5355-316
Style Body internals flange Class Cold Working Pressure (psi)
5412 aluminum aluminum 125 (ff) 125
5118 Cast iron aluminum 125 (ff) 125
5355* Steel 316 Stainless Steel 150 (rf) 150
5355-316 316 Stainless Steel 316 Stainless Steel 150 (rf) 150
Standard Models and Materials
Standard Elastomer: Buna-N (ff) = flat face (rf) = raised face
a
B dia
flow
C
radius Holes Equally Spaced Ondia Bolt Circle
E
d
f
available materials
Internal Materials
• Aluminum
• 316 Stainless Steel
Sealing Member Materials
maTEriaL TEmPEraTUrE raNgE**
• Buna-N -60° F to 225° F (-51° C to 107° C)
• EPDM -40° F to 300° F (-40° C to 149° C)
• FKM (Viton®) -20° F to 400° F (-29° C to 204° C)
• Silicone -100° F to 500° F (-73° C to 260° C)
** This temperature range is for general guidance.
The figures may vary with application.
Spring(s) Are Optional.
• Material is 302 Stainless Steel.
5
TECHNO CHECk STyLE 5296
For sizes 2“ to 8”, Style 5355 with carbon steel bodies are known as Style 5296.
They are rated at 150 psi cold working pressure and have raised-face ends. Bodies are made from solid round
material and do not have the scalloped edges like the 5355 which is produced from a casting.
The outside diameter is made to fit within the bolting pattern of ASME 150# flanges.
Valve Size (in)
a B C
2 1-3/8 4-1/8 1/2
2-1/2 1-5/8 4-7/8 9/16
3 1-7/8 5-3/8 11/16
4 2-3/8 6-7/8 7/8
5 2-7/8 7-3/4 1-1/8
6 3-3/8 8-3/4 1-1/2
8 4-3/8 11 2-1/4
General Dimensions for Style 5296
a
B dia
flow
C
all dimensions are in inches.for weights by model, see page 8.
6
PrESSUrE drOP CHarTS fOr WaTEr aNd air SErViCE
flow of Water at 70˚ f (21˚ C) in gal/min
air flow at 70˚ f (21˚ C) in cf/min
100 1000 10,000 100,000 1,000,000 10,000,000
10.0
1.0
0.1
0.01
Pres
sure
dro
p in
psi
10 100 1000 10,000 100,000 1,000,000
100.0
10.0
0.1
0.01
Pres
sure
dro
p in
psi
2” 3” 5” 8”
2-1/2” 4” 6” 10”
12” 16”
14” 18”
20”
24”
30”
36”
2” 3” 5” 8” 12” 16” 20” 30”
2-1/2” 4” 6” 10” 14” 18” 24” 36”
7
CamSErV™ aftermarket Services for Valves and actuation
global Network and Local Support
Cameron is well-positioned to deliver total aftermarket support, quickly and efficiently, with unmatched OEM expertise. Our highly skilled engineers and technicians are available around the clock, seven days a week, to respond to customer queries, troubleshoot problems and offer reliable solutions.
Easily accessible Parts and Spare Valves
• OEM spare valves, actuators and parts (including non-Cameron brands)
• Handling, storage, packaging and delivery
• Dedicated stocking program
Comprehensive aftermarket Services Portfolio
• Parts and spare valves
• Repair
• Field services
• Preventative maintenance
• Equipment testing and diagnostics
• Remanufacturing
• Asset preservation
• Customer property management
• Training and recertification services
• Warranty
Customized Total Valve CareSm (TVC) Programs
Customized asset management plans that optimize uptime, availability and dedicated services.
• Engineering consultancy
• Site management
• Flange management
• Startup and commissioning
• Spare parts and asset management
• Operational support
WE BUiLd iT. WE BaCk iT.
USA • CANADA • LATIN AMERICA • EUROPE • RUSSIA • AFRICA • MIDDLE EAST • ASIA PACIFIC
8
Trademark information
Weights by model
TECHNO and CAMSERV are trademarks of Cameron.
This document contains references to registered trademarks or product designations that are not owned by Cameron.
registered Trademark Owner
Viton E.i. duPont de Nemours & Company
model Number
5118 5412 5296 5355-316
Valve Size (in)
Weight (lb)
2 3 2-1/2 7 7
2-1/2 5 3 8 8
3 6 4 10 10
4 12 7 16 16
5 20 10 23 23
6 22 15 34 29
8 45 25 55 55
10 63 38 – 85
12 110 65 – 140
14 170 – – –
16 225 – – –
18 275 – – –
20 340 – – –
24 450 – – –
30 800 – – –
36 1150 – – –
9
©2013 Cameron | dEmCO, NaVCO, NEWCO, NUTrON, THOrNHiLL CraVEr, TOm WHEaTLEy, WHEaTLEy aNd Wkm are registered trademarks of Cameron. TECHNO and CamSErV are trademarks of Cameron. Total Valve Care is a service mark of Cameron. Viton is a registered trademark of E.i. duPont de Nemours & Company. | SWP 1.5m 8/13 ad00977V
HSE Policy Statementat Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed.
HEALT
H S
AFE
TY S
ECURITY AND ENVIRONM
ENTAL EX
CELLENCE
CAMERON
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA
Tel 1 281 499 8511
For more about TECHNO check valves:
www.c-a-m.com/TECHNO
HEALT
H S
AFE
TY A
ND ENVIRONMENTAL EX
CELLEN
CE
CAMERON