technical training lab models d-line. characteristics fully automatic user friendly fixed programs...
TRANSCRIPT
Technical TrainingLAB Models D-Line
Characteristics
Fully Automatic
User Friendly
Fixed Programs
Up to 20 customizable programs
Available from 28 to 160 Liters
Multilingual
Automatic door locking
Sterilization Temperature range from 105°C to 137°C
Automatic message for maintenance or filter replacement
New features
Stores the last 100 cycles
Up to 10 fixed programs
Up to 20 customizable programs
Up to 30 identification codes and passwords for level control
Two PT100 sensors according to ISO 61010-40 or EN 61010-40
Up to 6 temperature sensors and 4 pressure sensors can be connected
Controller and software complies with CFR part11
Several options possible
Optional programs or features:F0 control ( optional)
Disinfection/Isothermal Temperature range from 60°C to 105°C
Optional Independent Recording for cross-checking cycle measurements
Vertical Autoclaves
Benchtop Autoclaves
Available options
Fast cooling by water and compressed air
Super fast cooling with Radial Fan
Vacuum pump for pre and post vacuum
Integrated steam generator for tabletop and vertical models
Biohazard filter for air exhaust filtration
Example of a cycle
Piping diagram 2840 EL-PV models
Piping diagram 38XX models
Piping 38XX ELC F G PV
Piping 38XX ELC PV G BH
Piping 38XX ELVC PV
Piping 38XX ELVC PV G
Electrical Diagram AC part
Layout Main & IO board
Analog Inputs
Digital Inputs
Digital Outputs
Electrical diamgram
generator
Control system generator
Assistance/parts required?
If possible fax/ email printouts of the machine
Always give us serialnumber and type of the model
Parts have to be ordered by fax/email: [email protected]
T:+31 (0)76 54 23 510
F:+31 (0)76 54 23 540
FTP://213.125.139.19
http://www.tuttnauer.com