technical sheet - brackets for gravestones support

9
Technical Sheet – Gravestone support brackets (“Compact brackets” model) Features, size and mounting methods

Upload: real-votiva-store

Post on 13-Apr-2017

120 views

Category:

Services


3 download

TRANSCRIPT

Page 1: Technical sheet - Brackets for gravestones support

Technical Sheet – Gravestone support brackets (“Compact brackets” model)

Features, size and mounting methods

Page 2: Technical sheet - Brackets for gravestones support

General features

The bronze brackets are used to support flat marble or granite gravestones.The "Compact Bracket" has adjustable lugs variable from 0.8 to 2 cm.Brackets are available in different sizes and colours, such as simple material like bronze, glitter / glitter light bronze, black or white ceramismalt, chromium, mercury, marble colours like Carrara, Botticino, Guatemala green or Marquinia black.

2

Page 3: Technical sheet - Brackets for gravestones support

Brackets sizes

The typical bracket sizes are:• height of the main body (H1).• total height of the bracket (H2)

including the lugs.

Depending on bracket size, the diameter (M) of the central fixing threaded pin (to be screwed in the back) can vary from 6 mm to 10 mm.

3

Page 4: Technical sheet - Brackets for gravestones support

Technical specifications

The compact bracket is available in the following sizes:• cm 6 x 14, M8 or M10 (body height 6 cm, short lugs)• cm 6 x 18, M8 (body height 6 cm, long lugs)• cm 8 x 16, M8 or M10 (body height 8 cm, short lugs)• cm 8 x 19, M8 (body height 8 cm, long lugs)Also available are half brackets to be used for the first and last of a vertical series of flat headstones. Half brackets are available in the following sizes:• cm 4,5 x 8, M8 or M10 (body height 4,5 cm, short lugs)• cm 4,5 x 10, M8 (body height 6 cm, long lugs)

4

Page 5: Technical sheet - Brackets for gravestones support

Technical specifications: common sizes

5

L1 = 2,5 cm

L2= 5 cm

P = 3 cm

S = 0,8 ÷ 2 cm

M = 8 o 10 mm

Page 6: Technical sheet - Brackets for gravestones support

How to mount the brackets

For mounting the brackets it is used a threaded steel pin which, on one hand, is screwed into the back of the bracket (see figure), and, on the other, is attached to the wall by means of an expansion bolt.Once fastened the brackets, loosen the lugs using the nuts and place the tombstones on the top edge of the body of each bracket; lower brackets are load-bearing while the upper ones are blocking the headstone through the lugs.

6

Page 7: Technical sheet - Brackets for gravestones support

Assembly drawing

7

The vertical distance between a flat grave and the other is determined by the height of the central body of the bracket (H1).

Page 8: Technical sheet - Brackets for gravestones support

Mounting example

8

Page 9: Technical sheet - Brackets for gravestones support

Information

9

For information:REAL VOTIVA STORE - Online funeral articles shopContrada Pozzo, 73040 - Melissano - LECCE (Italy)www.realvotivastore.com [email protected]