technical data tmc-x4 tmc-x4shock wave lithotripter nibp method : oscillation mode : manual,...

2
TMC-X4 extracorporeal shock wave lithotripter NiBP Method : Oscillation Mode : Manual, Periodic Measuring Range: SYS 25-255 mmHg DIA 10-220 mmHg MEAN 15-235 mmHg Resolution : 1 mmHg Accuracy : Maximum Mean error ±5 mmHg ECG Lead Mode : 5 Leads (RA, LA, RL, LL, C) Lead selection : I, II, Ill, aVR, aVL, aVF, V Waveform : 7 channels Gain : X.5, X1, X2, X4 Input impedance : > 5 MΩ CMRR: >90dB Electrode offset potential : ± 300mV Leakage Current : < 30µA ECG Signal Range : ± 5 mV (peak to peak value) SPO2 Measuring Range : 0 - 100% Resolution : 1 % Accuracy : 70 - 100% ±2% 40-69% ±3% 0 - 39% unspecified Display Waveform Screen: True color, 12.1 inch TFT type LCD, resolution 800x600 Control Screen (HMI): 256 Color, 7 inch, resolution 320 x 210 Technical Data TMC-X4 Specifications are based on the information available at the time of printing and are subject to change without notice. Treatment Treatment Modes: AUTO and MANUAL Parameters : SISO and SITO Levels: SITO 3 Levels Digital SISO 3 Levels Digital (optional) Therapy Session Presets: 30, 60 and 90 min. (Default = 60 Min.) External trigger: Patient’s ECG Bio Comfort Mode: For trigger ratio 1:2 ECG trigger range: 40-120 bpm Pressure Range : Digitally Adjustable 100-350 mmHg Safety Automatic Stop and pressure release : In case of ventricular fibrillation In case of extra early systole In case of power failure In case of High Heart rate(>120bpm) Emergency Stop : Easily accessible mushroom type push button. Circuit breakers : For Main Unit and Compressor Service Reminder : Reminder messages on control panel for service due or any maintenance due. Audible Alarm : 3 Sound Mode corresponding Alarm If heart rate goes out of range If SPO2 goes out of the set range If NiBP goes out of the set range Environment OPERATING Temperature : 0 to 40° C Humidity : <= 85% non-condensing Altitude : -500 to 4,600 m Atmosphere : Free of inflammable and corrosive gases TRANSPORTATION AND STORAGE Temperature : -20 to 50° C Humidity : <= 95% non-condensing Altitude : -500 to 13,600 m Atmosphere : Free of inflammable and corrosive gases Size and Weight Main Unit : Height 900 mm Width 750 mm Length 1980 mm Weight 155 Kg Control Panel : Height 50 mm Width 450 mm Length 450 mm Weight 9.5 Kg Outdoor Unit : Height 750 mm Width 600 mm Length 1000 mm Weight 290 Kg Power rating Main Unit : 24 Volts DC Pmax 160 W Fuse 2.5 A Outdoor Unit : 380 ~ 460 (V), 50 (Hz) Pmax 3 KVA MCB 32 A Treatment Cuffs 1 Set of 6 pieces : Calves, Lower thighs and Upper thighs. Over Pressure Protection : Yes Cuffs Life : Extra Long Life SPL Cuffs Easy Operation Site preparation Pre-delivery inspection System installation On site application training On site maintenance training Troubleshooting guide Preventive maintenance log Online issue tracking Online knowledge base Telephonic help-line Annual maintenance contracts Multilingual Control Multi-langauge support HMI in 8 languages Auto Self Maintenance The SL-200e automatically performs on regular intervals, self maintenance, cleaning and tuning.this increases life of the parts and ensures trouble free operation for long period of time. The Human Machine Interface with preset Auto function capabilities of SL-200e enables the user to operate with more ease. Extended Support While efforts have been made to provide accurate information, there could be printing errors, which may have crept in. In the event of any discrepancy, the product operating instructions supplied with the equipment shall be the authentic reference point. All specifications mentioned above may not be available in standard model. www.2tmc.com [email protected] 36797

Upload: others

Post on 24-Jan-2021

17 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Technical Data TMC-X4 TMC-X4shock wave lithotripter NiBP Method : Oscillation Mode : Manual, Periodic Measuring Range: SYS 25-255 mmHg DIA 10-220 mmHg MEAN 15-235 mmHg Resolution :

TMC-X4extracorporealshock wave lithotripter

NiBPMethod : OscillationMode : Manual, PeriodicMeasuring Range: SYS 25-255 mmHg DIA 10-220 mmHg MEAN 15-235 mmHg Resolution : 1 mmHg Accuracy : Maximum Mean error ±5 mmHg

ECGLead Mode : 5 Leads (RA, LA, RL, LL, C)Lead selection : I, II, Ill, aVR, aVL, aVF, VWaveform : 7 channelsGain : X.5, X1, X2, X4Input impedance : > 5 MΩCMRR: >90dBElectrode offset potential : ± 300mV Leakage Current : < 30µAECG Signal Range : ± 5 mV (peak to peak value)

SPO2Measuring Range : 0 - 100% Resolution : 1 % Accuracy : 70 - 100% ±2% 40-69% ±3% 0 - 39% unspecified

DisplayWaveform Screen: True color, 12.1 inch TFT type LCD, resolution 800x600Control Screen (HMI): 256 Color, 7 inch, resolution 320 x 210

Technical Data TMC-X4

Specifica

tions a

re b

ase

d o

n th

e in

form

atio

n a

vaila

ble

at th

e tim

e o

f prin

ting a

nd a

re su

bje

ct to ch

ange w

ithout n

otice

.

TreatmentTreatment Modes: AUTO and MANUALParameters : SISO and SITOLevels: SITO 3 Levels Digital SISO 3 Levels Digital (optional)Therapy Session Presets: 30, 60 and 90 min. (Default = 60 Min.)External trigger: Patient’s ECGBio Comfort Mode: For trigger ratio 1:2ECG trigger range: 40-120 bpmPressure Range : Digitally Adjustable 100-350 mmHg

SafetyAutomatic Stop andpressure release : In case of ventricular fibrillation In case of extra early systole In case of power failure In case of High Heart rate(>120bpm)Emergency Stop : Easily accessible mushroom type push button.Circuit breakers : For Main Unit and CompressorService Reminder : Reminder messages on control panel for service due or any maintenance due.Audible Alarm : 3 Sound Mode corresponding Alarm If heart rate goes out of range If SPO2 goes out of the set range If NiBP goes out of the set range

Environment OPERATINGTemperature : 0 to 40° C Humidity : <= 85% non-condensing Altitude : -500 to 4,600 mAtmosphere : Free of inflammable and corrosive gases

TRANSPORTATION AND STORAGETemperature : -20 to 50° C Humidity : <= 95% non-condensing Altitude : -500 to 13,600 mAtmosphere : Free of inflammable and corrosive gases

Size and WeightMain Unit : Height 900 mm Width 750 mm Length 1980 mm Weight 155 KgControl Panel : Height 50 mm Width 450 mm Length 450 mm Weight 9.5 KgOutdoor Unit : Height 750 mm Width 600 mm Length 1000 mm Weight 290 Kg

Power ratingMain Unit : 24 Volts DC Pmax 160 W Fuse 2.5 AOutdoor Unit : 380 ~ 460 (V), 50 (Hz) Pmax 3 KVA MCB 32 A

Treatment Cuffs1 Set of 6 pieces : Calves, Lower thighs and Upper thighs.Over Pressure Protection : YesCuffs Life : Extra Long Life SPL Cuffs

Easy Operation

Site preparation

Pre-delivery inspection

System installation

On site application training

On site maintenance training

Troubleshooting guide

Preventive maintenance log

Online issue tracking

Online knowledge base

Telephonic help-line

Annual maintenance

contracts

Multilingual ControlMulti-langauge support HMI in 8 languages

Auto Self MaintenanceThe SL-200e automatically performs on regular intervals, self maintenance, cleaning and tuning.this increases life of the parts and ensures trouble free operation for long period of time.

The Human Machine Interface with preset Auto function capabilities of SL-200e enables the user to operate with more ease.

Extended Support

While efforts have been made to provide accurate information, there could be printing errors, which may have crept in.In the event of any discrepancy, the product operating instructions supplied with the equipment shall be the authenticreference point. All specifications mentioned above may not be available in standard model.

[email protected]

Page 2: Technical Data TMC-X4 TMC-X4shock wave lithotripter NiBP Method : Oscillation Mode : Manual, Periodic Measuring Range: SYS 25-255 mmHg DIA 10-220 mmHg MEAN 15-235 mmHg Resolution :

The TMC-X4 is a fully integrated Extra-corporeal Shock Wave Lithotripter with state-of-the-art design combining proven 'TeraMed' painless Extracorporeal Shock Wave Lithotripsy (ESWL) technology, advanced dual imaging fluoroscopy and ultrasound, and highly automated operation options.

TMC-X4 Extracorporeal Shock Wave Lithotripter

Electromagnetic Source Flat Coil type electromagnetic shock wave source is specifically designed to harness optimal benefits, its high penetration depth and optimized focal volume provides exceptional results.

Ultrasound ImagingThe integrated ultrasound scanner for loca l i zat ion and rea l t ime monitoring.

ECG controlled triggerECG triggering provides shock wave pulses in synchronization with the QRS-complex. Shock waves are released only on systolic phase of the cardiac cycle.

Remote WorkstationRemote workstation capabi l i ty allowing behind the lead glass shield control and operation for physician.

True Color HMIThe touch screen graphical human machine interface allows easy and quick communicat ion with a l l functions like, lithotripsy, fluoroscopy, patient stretcher positioning and shock wave energy control.

Auto Roll U ArmThe U-Arm automatically swivels to provide view in two projections, straight and oblique.

High Resolution Imaging

The TMC- X4 with integrated sub-systems from TeraMed Corporation has most advanced features like dual shock wave source, electromagnetic and electrohydraulic, integrated dual imaging fluoroscopy and ultrasound. All in a rugged, higly automated and self-contained machine that is re-defining Lithotripsy.

Integrated Fluoroscopy

Integrated Ultrasound

Motorized U-Arm

Proven Efficacy