technical data sheet - rubber sheet roll · notice of cancellation inch-pound mil-r-6855e notice 1...
TRANSCRIPT
REV 1—1/10 PMS
MIL R 6855 E MILITARY SPECIFICATION (1992)
SUPERCEDED BY SAE-AMS-R-6855 (1998)
ELASTOMER, SYNTHETIC, SHEETS,
SOLID, MATERIAL.
MIL R 6855 E - Technical Specification Data
MIL R 6855 E SYNTHETIC RUBBER SHEET will resist most oils,
not effected by sunlight or harsh environmental extremes. MIL R
6855 E maintains superior flexibility in hot or cold conditions, and
also has the resiliency to maintain temperature and environmental
cycles. The synthetic material is configured based on Type and
Class. This specification data covers the governing MIL SPEC call
out, not individual classes or types. Certifications are available for
classes and type variations.
Fire Rated: Not Fire Rated | Chemical Resistance: Moderate
UV Rated: Moderate | Composition: Synthetic Rubber
PO BOX 171Shippensburg, PA 17257Phone: 866.834.8606Fax: 888.440.5797E-mail: [email protected]
www.facebook.com/Rubber-Sheet-Roll
www.twitter.com/rubbersheetroll
TECHNICAL DATA SHEET
COLOR: BLACKSURFACE: SMOOTHTEMPERATURE RANGE: SEE ATTACHED DOCTENSILE: SEE ATTACHED DOCDUROMETER: 60A NOMINALELONGATION: SEE ATTACHED DOC
RUBBER SHEET ROLL
MIL-R-6855ENOTICE 215 June 2001SUPERSEDINGNOTICE 118 December 1998
MILITARY SPECIFICATION
RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES,GENERAL SPECIFICATION FOR
MIL-R-6855E, dated 31 July 1992, is hereby reinstated and may be used for acquisition.
Custodians: Preparing activity: Army - MR Navy - AS Navy - AS Air Force - 11 DLA - IS
(Project 9320-0040)Review activities: Army - AR, AT, AV, CE, CR, MI Navy - OS, SH, YD Air Force - 82, 99 DLA – CC, GS
AMSC N/A FSC 9320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
NOTICE OFREINSTATEMENT INCH POUND
NOTICE OF CANCELLATION
INCH-POUND
MIL-R-6855ENOTICE 118 December 1998
MILITARY SPECIFICATION
ELASTOMER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES,GENERAL SPECIFICATION FOR
MIL-R-6855E, dated 31 July 1992, is hereby canceled. Future acquisition for this materialshould refer to SAE-AMS-R-6855, “Elastomer, Synthetic, Sheets, Strips, Molded or ExtrudedShapes, General Specification for”.
(Application for copies of SAE - Aerospace Material Specifications should be addressed toSAE, 400 Commonwealth Drive, Warrendale, PA 15096.)
Preparing activity: Navy - AS
(Project 9320-0022)
AMSC N/A FSC 9320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
