technical data sheet · novosplit+ a – 2016-09-30 4 / 6 product performance lubricant system: ud...
TRANSCRIPT
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
1 / 6
NOVOSPLIT+
PRODUCT DESCRIPTION
This TDS describe the standard Novosplit+ products, It is a bundle of thick-walled microducts (DB) fixed together with a
thin tight jacket,
This Novosplit+ is a Microduct assembly for direct buried (DB) applications,
Remark: The product designed for subducting is Novospeed (assembly of Novomicro DI pipes),
Available for Microduct sizes 4 – 16 mm, For diameter > 16, see Novomulti product program.
Detection wire or rib cords can be included on request
APPLICATION AREA - Direct buried
- Can be used for subducting - Feeder - Drop
- Micro-trenching - Creating new line
PRODUCT FEATURES
- Available in lubrication system UD (micro cables) or on request antistatic UF (fibre bundles)
- Inner friction of the microducts < 0,1 - Microducts are DB design with improved impact and strength - Outer skin can be peeled off, non-sticking,
- UV stabilised skin and microducts - The bundle will resist most of the soil set,
- Some resistance against impact, crush and stones, - Length differences in Microduct on drum is under control by respecting internal
undulation test limits
- Easy to access for branching, No special connector needed, Novofit connector Novofit will fulfil
- No fixing of microducts needed at duct ends during laying
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
2 / 6
PRODUCT RANGES Table 1 Standard configuration and colours 1)
2 3 4 5
6 7 10 12
14 18 19 24 1) For duct sizes and performance see group TDS Micoroduct DB
PRODUCT COMPONENTS Part description No of parts
1. Microducts DB max 24 2. Assembly sheet 1
PRODUCT SPECIFICATIONS
Materials 1, Microducts DB HDPE
2, Assembly sheet HDPE
Dimensions Sheet thickness: 0,75-1.0 mm ± 0,2 mm
Width/Height See table 2.
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
3 / 6
Table 2 Average width-height of standard configurations (with sheet 0,75 mm ) Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 (7x1,5) 15,5
8,5
15,5
14,6
20,6
15,5
22,5
14,6
20,6
19,0
22,5
20,6
29,5
20,6
29,5
26,7
29,5
27,7
36,5
27,7
36,5
36,5
43,5
32,7
10 (10x2) 21,5
11,5
21,5
20,2
28,8
21,5
31,5
20,2
28,8
26,5
31,5
28,8
41,5
28,8
41,5
37,5
41,5
38,8
51,5
38,8
62,02) 46,7
12 (12x2) 25,5
13,5
25,5
23,9
34,3
25,5
37,5
23,9
34,3
31,5
37,5
34,3
49,5
34,3
49,5
44,7
49,5
46,3
61,5
46,3
14 (14x2) 29,5
15,5
29,5
27,6
39,7
29,5
43,5
27,6
39,7
36,5
43,5
39,7
57,5
39,7
57,5
51,9
16 (16x2) 33,5
17,5
33,5
31,5
45,2
33,5
49,5
31,4
45,2
41,5
49,5
45,2
Tolerance 1)
0,6 0,6 0,7 0,7 0,7 0,7 0,8 0,8 0,8 0,9 0,9 0,9
1) Tolerance on width and height 2) With sheet thickness 1,00 mm
Not possible
Tools are available
Table 3 Weight/length (kg/km)
Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 77 106 136 165 193 219 297 356 410 518 546 675
10 134 188 243 298 350 400 549 659 761 965 1306
12 165 233 277 368 434 496 683 818 946 1200
14 196 277 358 439 518 592 816 978
16 227 321 416 510 602 688
Colours
See for RAL numbers TDS Novomicro DB Fixed colour sequence:
If more than 12 colours needed, the second set will be striped microducts,
Outer sheet colour: Opaque orange RAL 2003, no stripes
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
4 / 6
PRODUCT PERFORMANCE Lubricant system: UD for micro cable (on request UF for fibre bundles
Ovality (Novotech method): < 5 % Flexibility (IEC 60794-21): OK (10 loops, 30 min < 15 % deformation)
Nominal hydrostatic pressure resistance: Identical to TDS Novomicro DB Minimum bending radius: Identical to TDS Novomicro DB Vertical undulation (Novotech method): < 5 mm
Horizontal undulation (Novotech method): < 5 cm
Table 4 Maximum pulling force (N) Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 760 1140 1520 1900 2280 2660 3800 4560 5320 6840 7220 9120
10 1500 2250 3000 3750 4500 5250 7500 9000 10500 13500 18000
12 1880 2820 3760 4700 5640 6580 9400 11280 13160 16920
14 2260 3390 4520 5650 6780 7910 11300 13560
16 2620 3930 5240 6550 7860 9170
Table 5 Crush resistance (N) at 5 % (EN 61386-24) Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 >750 >750 1500 - - 4700 >750 4500 >2000 7000 >2000 8000
10 - - >750 - - >2000 - 3500 - - 9000
12 >750 2500 2100 >4300 - 5500 - - - -
14 4300 >750 2100 4300 1800 2000 >750 -
16 3700 1800 >750 - 1500 >750
Table 6 Impact resistance (Joules) at -25 ˚C + 50 ˚C (IEC 60794-5-10) Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 - - - - - 43
36
- 14
7
- 45
21
- 30
25
10 - - - - - -
- - - - -
12 - 24
15
- - - - - - - -
14 19
9
- 25
15
28
18
19
18
24 17
18 10
- -
16 25
22
70
30
- - 35
27
-
Grey data are for product with 1 mm PP sheet
Life time Products have a expected life time of 50 years when transported, stored and installed in a good way,
UV resistance and storage conditions: See TG 12,
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
5 / 6
INSTALLATION For installation guidelines see IDS 18, Tips for near surface installation are given in TG 07,
PRACTICAL RECOMMENDATIONS Ends of Novosplit+ must be protected by appropriate end-stop shrinkable materials, in order to prevent ducts from environment pollution.
PACKAGING AND LABELLING
Packaging Standard: Lost wooden drum Length: 1000 or 2000 meter, see table 7 and 8
Table 7 Drum size 1) delivery 1000 meter
Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 N255B N255B N255B N255B N255B N255B N074 N072 N072 N086 N130 N130
10 N255B N255B N074 N255B N072 N072 N086 N130 N130 N140 N180
12 N255B N074 N072 N086 N086 N130 N130 N180 N180 N180
14 N255B N072 N086 N086 N130 N130 N180 N2701)
16 N074 N086 N130 N130 N140 N180 1) Lost wooden drums : N255B=1300x520x500 N060=1400x800x600 N074=1450x600x670 N072=1400x800x1000
N086=1600x800x1000
N130=1900x1000x1000 N140=2100x1100x1000 N180=2400x1200x1000 N270=2400x1400x1000 1) Drum with maximum length 875 meter
Table 8 Drum size 1) delivery 2000 meter
Microduct
diameter
Configuration (nr of microducts DB)
2 3 4 5 6 7 10 12 14 18 19 24
7 N255B N060 N074 N074 N072 N086 N086 N130 N130 N140 N180 N180
10 N060 N072 N086 N086 N130 N140 N180 - - - -
12 N074 N086 N130 N140 N140 N180 - - - -
14 N086 N130 N180 N180 N180 - - -
16 N086 N140 N180 - - - 1) See drums in table 7.
Labelling
Elementary duct: “ 0000 m – YYYY/MM/DD ” ( every 1 m )
Central duct: “ 0000 m – YYYY/MM/DD ” ( every 1 m )
Assembly sheet: “ 0000 m WAVIN 35 NOVOSPLIT+ nr ducts*diameter duct x wall
thickness(+central duct size) *lubrication code YYYY/MM/DD ”
( every 1 m )
TECHNICAL DATA SHEET
Novosplit+ a – 2016-09-30
6 / 6
ALTERNATIVES New development
In case the following parameters are requested a new development has to be started, - Combination of different pipe sizes, or assemblies with central duct
- Other assembly configurations - Sizes exceed maximum duct size as given in the table - Other stripes
- Non-standard colours - Other Microduct designs than standard (see Novomicro DB)
Easy ordering
Small changes like the following, do not need a development, - Other (standard) Microduct colours or colour sequence - Other colour outer sheet
- Four stripes, approximately 3mm width - Including a detection wire or rip cord
- Other marking - Other lengths on standard drums - The (non-standard) configurations as given in table 9.
- UF lubrication for 7x1,5 mm ducts.
Table 9 Non standard products (tools available, colours are examples)
4x12 +1x5
4x14 +1x6
5x12 + 1x8
5x16 + 1x12
22x7+1x12 8x8+2x20
12x7+1x14 6x8+3x14 12x7+2x14 8x14
9x7+1x14 24x7+1x14 4x 16 + 4x7 8x7 + 2x14
TECHNICAL DATA SHEET SPLIT+ 232-ANG – 2016-06-14
1 / 3
NOVOSPLIT+ 24x 10x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 750 N
Weight: ~ 1264 kg/km
Maximum pulling force (on microducts): ~ 18000 N
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 10 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
61.5 ± 0.8 46.2 ± 0.8
1
2
TECHNICAL DATA SHEET SPLIT+ 232-ANG – 2016-06-14
2 / 3
NOVOSPLIT+ 24x 10x2 UD
B Elementary Duct (10x2) Crush resistance 5% (IEC 60794-5-10): ~ 1000 N
Maximum pulling force: ~ 750 N
Nominal hydrostatic pressure resistance: PN 29
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Blue RAL 5015, Orange RAL 2003, Green RAL 6017
Brown RAL 8011, Grey RAL 7031, White RAL 9010
Red RAL 3016, Yellow RAL 1023, Black RAL 9017
Turquoise RAL 6027, Pink RAL 4003, Violet RAL 4005
Natural with 4 smalls stripes Blue RAL 5015
Natural with 4 smalls stripes Orange RAL 2003
Natural with 4 smalls stripes Green RAL 6017
Natural with 4 smalls stripes Brown RAL 8011
Natural with 4 smalls stripes Grey RAL 7031
Natural with 4 smalls stripes White RAL 9010
Natural with 4 smalls stripes Red RAL 3016
Natural with 4 smalls stripes Yellow RAL 1023
Natural with 4 smalls stripes Black RAL 9017
Natural with 4 smalls stripes Turquoise RAL 6027
Natural with 4 smalls stripes Pink RAL 4003
Natural with 4 smalls stripes Violet RAL 4005
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
TECHNICAL DATA SHEET SPLIT+ 232-ANG – 2016-06-14
3 / 3
NOVOSPLIT+ 24x 10x2 UD
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 24*10x2*UD YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 181–ANG– 2014-06-11
1 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF PROVISIONAL
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 Assembly sheath 2 1 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
44 ± 1.0 33.2 ± 0.9
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (IEC 61386-24): > 2000 N
Weight: ~ 702 kg/km
Maximum pulling force (on microducts): ~ 912 daN
1
2
TECHNICAL DATA SHEET SPLIT+ 181–ANG– 2014-06-11
2 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF PROVISIONAL
B Elementary Duct (7x1.5)
Crush resistance 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD **Option pre-lubrication: UF
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Red RAL 3016, Green RAL 6017, Blue RAL 5015
Yellow RAL 1023, White RAL 9010, Grey 1 RAL 7031
Brown RAL 8011, Violet RAL 4005, Turquoise RAL 6027
Black RAL 9017, Orange RAL 2003, Pink RAL 4003
Red RAL 3016 with 4 smalls stripes White RAL 9010
Green RAL 6017 with 4 smalls stripes White RAL 9010
Blue RAL 5015 with 4 smalls stripes White RAL 9010
Yellow RAL 1023 with 4 smalls stripes White RAL 9010
White RAL 9010 with 4 smalls stripes White RAL 9010
Grey RAL 7031 with 4 smalls stripes White RAL 9010
Brown RAL 8011 with 4 smalls stripes White RAL 9010
Violet RAL 4005 with 4 smalls stripes White RAL 9010
Turquoise RAL 6027 with 4 smalls stripes White RAL 9010
Black RAL 9017 with 4 smalls stripes White RAL 9010
Orange RAL 2003 with 4 smalls stripes White RAL 9010
Pink RAL 4003 with 4 smalls stripes White RAL 9010
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary
ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017
with 4 smalls stripes pink RAL 4003.
TECHNICAL DATA SHEET SPLIT+ 181–ANG– 2014-06-11
3 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF PROVISIONAL
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 24*7x1.5*UD Date ” ( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 24*7x1.5*UF Date ” ( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 2000 x 1200 x 1000 ) mm.
Length: 1000 m.
Lost wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ 182–ANG– 2014-06-11
1 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 Central duct 2 14 ± 0.1 2 ± 0.1
Assembly sheath 3 44 ± 0.1 1 ± 0.2
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (IEC 61386-24): ~ 3000 N
Weight: ~ 790 kg/km
Maximum pulling force (on microducts): ~ 1025 daN
1
2
3
TECHNICAL DATA SHEET SPLIT+ 182–ANG– 2014-06-11
2 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
B Elementary Duct (7x1.5)
Crush resistance 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD **Option pre-lubrication: UF
C Central Duct (14x2) Crush resistance 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Red RAL 3016, Green RAL 6017, Blue RAL 5015
Yellow RAL 1023, White RAL 9010, Grey 1 RAL 7031
Brown RAL 8011, Violet RAL 4005, Turquoise RAL 6027
Black RAL 9017, Orange RAL 2003, Pink RAL 4003
Red RAL 3016 with 4 smalls stripes White RAL 9010
Green RAL 6017 with 4 smalls stripes White RAL 9010
Blue RAL 5015 with 4 smalls stripes White RAL 9010
Yellow RAL 1023 with 4 smalls stripes White RAL 9010
White RAL 9010 with 4 smalls stripes White RAL 9010
Grey RAL 7031 with 4 smalls stripes White RAL 9010
Brown RAL 8011 with 4 smalls stripes White RAL 9010
Violet RAL 4005 with 4 smalls stripes White RAL 9010
Turquoise RAL 6027 with 4 smalls stripes White RAL 9010
TECHNICAL DATA SHEET SPLIT+ 182–ANG– 2014-06-11
3 / 3
NOVOSPLIT+ 24x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
Elementary duct*: Black RAL 9017 with 4 smalls stripes White RAL 9010
Orange RAL 2003 with 4 smalls stripes White RAL 9010
Pink RAL 4003 with 4 smalls stripes White RAL 9010
Central duct*: Yellow RAL 1023
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary
ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017
with 4 smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 24*7x1.5*UD + 1*14x2*UD Date ”
( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 24*7x1.5*UF + 1*14x2*UD Date ”
( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 2200 x 1300 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 140-ANG-TWIST – 2015-04-15
1 / 2
NOVOSPLIT+ 18x 7x1.5 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information) A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 7000 N
Nominal weight: ~ 516 kg/km
Maximum pulling force (on ducts): ~ 6840 N
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 7 ± 0.1 1.5 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
36.5 ±0.9 27.6 ±0.8
1
2
TECHNICAL DATA SHEET
SPLIT+ 140-ANG-TWIST – 2015-04-15
2 / 2
NOVOSPLIT+ 18x 7x1.5 UD
B Elementary duct (7x1.5)
Crush resistance at 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31 Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing) Elementary duct: Turquoise RAL 6027, White RAL 9010, Grey RAL 7031
Black RAL 9017, Pink RAL 4003, Violet RAL 4005
Yellow RAL 1023, Red RAL 3016, Green RAL 6017
Blue RAL 5015, Brown RAL 8011, Orange RAL 2003
Green RAL 6017 with 4 smalls stripes White RAL 9010
Red RAL 3016 with 4 smalls stripes White RAL 9010
Yellow RAL 1023 with 4 smalls stripes White RAL 9010
White RAL 9010 with 4 smalls stripes White RAL 9010
Blue RAL 5015 with 4 smalls stripes White RAL 9010
Grey RAL 7031 with 4 smalls stripes White RAL 9010
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct**: “ 0000 m – Date ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 18*7x1.5*UD Date ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2000 x 1200 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 178–ANG– 2014-06-10
1 / 2
NOVOSPLIT+ 14x 7x1.5 UD-UF PROVISIONAL
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 Assembly sheath 2 1 ± 0.2
Width (mm) Height (mm) Total assembly sheath 2
30 ± 0.8 28.1 ± 0.8
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (IEC 61386-24): > 2000 N
Weight: ~ 430 kg/km
Maximum pulling force (on microducts): ~ 532 daN
1
2
TECHNICAL DATA SHEET SPLIT+ 178–ANG– 2014-06-10
2 / 2
NOVOSPLIT+ 14x 7x1.5 UD-UF PROVISIONAL
B Elementary Duct (7x1.5)
Crush resistance 5% (IEC 61386-24): ~ 1700 N Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD
**Option pre-lubrication: UF
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Turquoise RAL 6027, White RAL 9010, Grey RAL 7031
Black RAL 9017, Pink RAL 4003, Violet RAL 4005
Yellow RAL 1023, Red RAL 3016, Green RAL 6017
Blue RAL 5015, Brown RAL 8011, Orange RAL 2003
Green RAL 6017 with 4 smalls stripes White RAL 9010
Red RAL 3016 with 4 smalls stripes White RAL 9010
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary
ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017
with 4 smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 14*7x1.5*UD Date ” ( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 14*7x1.5*UF Date ” ( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING Lost wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ 169–ANG-1-BUCH– 2014-03-11
1 / 2
NOVOSPLIT+ 12x 10x2 UD PROVISIONAL
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 3500 N
Nominal weight: ~ 708 kg/km
Maximum pulling force (on ducts): ~ 900 daN
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 10 ± 0.1 2.0 ±0.1 Assembly sheath 2 1.0 ± 0.2
Width (mm) Height (mm) Total assembly sheath 2
42 ±0.8 35.8 ±0.8
1
2
TECHNICAL DATA SHEET SPLIT+ 169–ANG-1-BUCH– 2014-03-11
2 / 2
NOVOSPLIT+ 12x 10x2 UD PROVISIONAL
B Elementary duct (10x2) Crush resistance at 5% (IEC 61386-24): ~ 2800 N
Maximum pulling force: ~ 750 N
Nominal hydrostatic pressure resistance: PN 39
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Green RAL 6017, Red RAL 3016, Blue RAL 5015
White RAL 9010, Yellow RAL 1023, Pink RAL 4003
Orange RAL 2003, Black RAL 9017, Turquoise RAL 6027
Violet RAL 4005, Brown RAL 8011, Grey RAL 7031
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct*: “ 0000 m – Date ” ( every 1 m )
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 12*10x2*UD Stadtwerke
Breitband Glasfaser Date ” ( every 1 m )
* Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+183–ANG – 2014-06-11
1 / 2
NOVOSPLIT+ 12x 7x1.5 UD-UF
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 4500 N
Nominal weight: ~ 355 kg/km
Maximum pulling force (on ducts): ~ 456 daN
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ±0.1 Assembly sheath 2 0.75 ± 0.2
Width (mm) Height (mm) Total assembly sheath 2
29.5 ±0.8 26.7 ±0.8
1
2
TECHNICAL DATA SHEET SPLIT+183–ANG – 2014-06-11
2 / 2
NOVOSPLIT+ 12x 7x1.5 UD-UF
B Elementary duct (7x1.5)
Crush resistance at 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31 Pre-lubrication class: UD
Option pre-lubrication class: UF
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Green RAL 6017, Red RAL 3016, Blue RAL 5015
White RAL 9010, Yellow RAL 1023, Pink RAL 4003
Orange RAL 2003, Black RAL 9017, Turquoise RAL 6027
Violet RAL 4005, Brown RAL, Grey RAL 7031
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct*: “ 0000 m – Date ” ( every 1 m )
Assembly sheath*: “ 0000 m WAVIN 35 Novosplit+ 12*7x1.5*UD Date ” ( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 12*7x1.5*UF Date ”
( every 1 m ) * Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 1900 x 1000 x 1000 ) mm.
Length: 2000 m.
Lost Wooden drum ( 1600 x 1100 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+184–ANG – 2014-06-23
1 / 3
NOVOSPLIT+ 12x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 450 N
Nominal weight: ~ 439 kg/km Maximum pulling force (on ducts): ~ 569 daN
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 7 ± 0.1 1.5 ±0.1 Secondary duct 2 14 ± 0.1 2 ±0.1 Assembly sheath 3 0.75 ± 0.2
Total assembly sheath 3 Width (mm) Height (mm)
37 ±0.8 29.5 ±0.7
1
2
3
TECHNICAL DATA SHEET SPLIT+184–ANG – 2014-06-23
2 / 3
NOVOSPLIT+ 12x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
B Elementary duct (7x1.5)
Crush resistance at 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD
Option pre-lubrication class: UF
C Secondary Duct (14x2)
Crush resistance 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20 Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Green RAL 6017, Blue RAL 5015, Yellow RAL 1023
White RAL 9010, Grey RAL 7031, Brown RAL 8011
Black RAL 9017, Orange RAL 2003, Pink RAL 4003
Turquoise RAL 6027, Red RAL 3016, Violet RAL 4005
Secondary duct*: Yellow RAL 1023
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
TECHNICAL DATA SHEET SPLIT+184–ANG – 2014-06-23
3 / 3
NOVOSPLIT+ 12x 7x1.5 UD-UF + 1x 14x2 UD PROVISIONAL
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Secondary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 12*7x1.5*UD + 1*14x2*UD Date ”
( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 12*7x1.5*UF + 1*14x2*UD Date ”
( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2000 x 1200 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 120-ANG-DNS-Net – 2013-05-21
1 / 2
NOVOSPLIT+ 10x 14x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 4300 N
Weight: ~ 824 kg/km
Maximum pulling force (on microducts): ~ 1130 daN
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
57.5 ± 0.7 39.8 ± 0.7
1
2
TECHNICAL DATA SHEET
SPLIT+ 120-ANG-DNS-Net – 2013-05-21
2 / 2
NOVOSPLIT+ 10x 14x2 UD
B Elementary Duct (14x2)
Crush resistance 5% (IEC 61386-24): ~ 1500 N
Maximum pulling force: ~ 1130 N Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Red RAL 3016, White RAL 9010, Yellow RAL 1023
Blue RAL 5015, Green RAL 6017, Violet RAL 4005
Brown RAL 8011, Black RAL 9017, Orange RAL 2003
Turquoise RAL 6027
Assembly sheath: Opaque Red RAL 3016
3 MARKING
Elementary duct: “ 0000 m – YYYY/MM/DD ” ( every 1 m)
Assembly sheath: “ 0000 m WAVIN 35 NOVOSPLIT+ 10*14x2*UD DNS:NET Internet
Service GmbH 0800 0 367 638 YYYY/MM/DD ” (every 1 m)
4 PACKAGING
Lost Wooden drum ( 2400 x 1400 x 1000 ) mm. Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 249-ANG – 2018-05-31
1 / 2
NOVOSPLIT+ 8x 10x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 750 N Weight: ~ 454 kg/km
Maximum pulling force (on microducts): ~ 6000 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 10 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
31.5 ±0.7 37.5 ±0.8
1
2
TECHNICAL DATA SHEET SPLIT+ 249-ANG – 2018-05-31
2 / 2
NOVOSPLIT+ 8x 10x2 UD
B Elementary Duct (10x2)
Crush resistance 5% (IEC 61386-24): ~ 2200 N
Maximum pulling force: ~ 750 N
Nominal hydrostatic pressure resistance: PN 29
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Violet RAL 4005, Green RAL 6017, Blue RAL 5015
Yellow RAL 1023, White RAL 9010, Grey RAL 7031
Brown RAL 8011, Red RAL 3016
Assembly sheath*: Opaque Green RAL 6017
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 8*10x2*UD YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 1900 x 1000 x 1000 ) mm.
Length: 1250 m.
TECHNICAL DATA SHEET SPLIT+ 235-ANG – 2016-08-30
1 / 2
NOVOSPLIT+ 7x 20x2.5 UT
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information) A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 1000 N
Weight: ~ 1196 kg/km
Maximum pulling force (on novolub): ~ 15540 N
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 20 -0.0/+0.3 2.5 -0.0/+0.4 Assembly sheat 2 1 ±0.2
Total assembly sheath 2 Width (mm) Height (mm)
62 -0.4/+1.3 56.7 -0.4/+1.3
1
2
TECHNICAL DATA SHEET SPLIT+ 235-ANG – 2016-08-30
2 / 2
NOVOSPLIT+ 7x 20x2.5 UT PROVISIONAL B Elementary Duct (20x2.5)
Crush resistance 5% (IEC 61386-24): > 1000 N
Maximum pulling force: ~ 2220 N
Nominal hydrostatic pressure resistance: PN 18 Pre-lubrication class: UT
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Black RAL 9017
Black RAL 9017 with 1 stripe Green RAL 6024
Black RAL 9017 with 2 stripes Green RAL 6024
Black RAL 9017 with 3 stripes Green RAL 6024
Black RAL 9017 with 4 stripes Green RAL 6024
Black RAL 9017 with 5 stripes Green RAL 6024
Black RAL 9017 with 6 stripes Green RAL 6024
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m WAVIN 35 NOVOLUB 20x2.5*UT – YYYY/MM/DD ”
(every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 7*20x2.5*UT YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1400 x 1000 ) mm.
Length: 700 m.
TECHNICAL DATA SHEET SPLIT+ 013-ANG-c – 2015-12-07
1 / 2
NOVOSPLIT+ 7x 16x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information) A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ≥ 750 N Nominal weight: ~ 688 kg/km Maximum pulling force (on ducts): ~ 9170 N
Component Key number Nominal outside diameter (mm) Nominal thickness (mm)
Elementary duct 1 16 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm) 49.5 ±0.7 45.2 ±0.7
1
2
TECHNICAL DATA SHEET SPLIT+ 013-ANG-c – 2015-12-07
2 / 2
NOVOSPLIT+ 7x 16 UD B Elementary duct (16x2) Crush resistance (IEC 60794-5-10): 1000 N Maximum pulling force: ~ 1310 N Nominal hydrostatic pressure resistance: PN 17 Pre-lubrication class: UD 2 COLOUR IDENTIFICATION (see drawing) Elementary duct*: Blue RAL 5015, Orange RAL 2003, Green RAL 6017
Brown RAL 8011, Grey RAL 7031, White RAL 9010 Red RAL 3016
Assembly sheath*: Opaque Orange RAL 2003 * Option: other colours and stripes possible for the external sheath or elementary ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4 smalls stripes pink RAL 4003. 3 MARKING Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m) Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 7*16x2*UD YYYY/MM/DD ”
(every 1 m) ** Option: numbering and/or specific text in accordance with customer’s specification. 4 PACKAGING Lost wooden drum ( 2400 x 1200 x 1000 ) mm. Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 179–ANG – 2014-06-10
1 / 2
NOVOSPLIT+ 7x 14x2 UD
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Total Assembly sheath 2 44 ± 0.7 1 ± 0.2
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ~ 2000 N
Weight: ~ 640 kg/km
Maximum pulling force (on microducts): ~ 791 daN
Impact resistance
SPEC.TECHN-003-FRA-1 / IEC 60794-5-10
Punching resistance SPEC.TECHN-003-FRA-1
- 25°C + 50°C - 5°C + 50°C
24 Joules 18 Joules 12 Joules 7 Joules
1
2
TECHNICAL DATA SHEET SPLIT+ 179–ANG – 2014-06-10
2 / 2
NOVOSPLIT+ 7x 14x2 UD
B Elementary Duct (14x2) Crush resistance 5% (according to IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Red RAL 3016, Blue RAL 5015, Green RAL 6017
Brown RAL 8011, Grey RAL 7031, White RAL 9010
Yellow RAL 1023
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct: “ 0000 m – Date ” (every 1 m)
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 7*14x2*UD ”(every 1 m)
4 PACKAGING
Lost wooden drum ( 2200 x 1300 x 1000 ) mm.
Length: 1000 m.
Lost wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 1500 m.
TECHNICAL DATA SHEET SPLIT+ 091-ANG-a – 2015-12-07
1 / 2
NOVOSPLIT+ 7x 12x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information) A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ~ 5500 N Nominal weight: ~ 496 kg/km Maximum pulling force (on ducts): ~ 6580 N
Component Key number Nominal outside diameter (mm) Nominal thickness (mm)
Elementary duct 1 12 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm) 37.5 ±0.7 34.3 ±0.7
1
2
TECHNICAL DATA SHEET SPLIT+ 091-ANG-a – 2015-12-07
2 / 2
NOVOSPLIT+ 7x 12x2 UD B Elementary duct (12x2) Crush resistance (IEC 60794-5-10): 1000 N Maximum pulling force: ~ 940 N Nominal hydrostatic pressure resistance: PN 23 Pre-lubrication class: UD 2 COLOUR IDENTIFICATION (see drawing) Elementary duct*: Blue RAL 5015, Orange RAL 2003, Green RAL 6017
Brown RAL 8011, Grey RAL 7031, White RAL 9010 Red RAL 3016
Assembly sheath*: Opaque Orange RAL 2003 * Option: other colours and stripes possible for the external sheath or elementary ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4 smalls stripes pink RAL 4003. 3 MARKING Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m) Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 7*12x2*UD YYYY/MM/DD ”
(every 1 m) ** Option: numbering and/or specific text in accordance with customer’s specification. 4 PACKAGING Lost wooden drum ( 2400 x 1200 x 1000 ) mm. Length: 2000 m. Lost wooden drum ( 1900 x 1000 x 1000 ) mm. Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 102-ANG-EUROM-NBG – 2015-09-11
1 / 2
NOVOSPLIT+ 7x 10x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 2000 N
Nominal weight: ~ 400 kg/km Maximum pulling force (on ducts): ~ 5250 N
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 10 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
31.5 ±0.6 28.8 ±0.6
2
1
TECHNICAL DATA SHEET
SPLIT+ 102-ANG-EUROM-NBG – 2015-09-11
2 / 2
NOVOSPLIT+ 7x 10x2 UD
B Elementary duct (10x2) Crush resistance at 5% (IEC 61386-24): ~ 2200 N
Maximum pulling force: ~ 750 N
Nominal hydrostatic pressure resistance: PN 29
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Red RAL 3016, Yellow RAL 1023, White RAL 9010
Grey RAL 7031, Brown RAL 8011, Green RAL 6017
Blue RAL 5015
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 7*10x2*UD YYYY/MM/DD ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ 177–ANG – 2014-06-10
1 / 2
NOVOSPLIT+ 7x 7x1.5 UD-UF
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 Total Assembly sheath 2 23 ± 0.7 1 ± 0.2
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ~ 4700 N
Weight: ~ 237 kg/km
Maximum pulling force (on microducts): ~ 266 daN
Impact resistance
SPEC.TECHN-003-FRA-1 / IEC 60794-5-10
Punching resistance SPEC.TECHN-003-FRA-1
- 25°C + 50°C - 5°C + 50°C
43 Joules 36 Joules 6 Joules 4 Joules
1
2
TECHNICAL DATA SHEET SPLIT+ 177–ANG – 2014-06-10
2 / 2
NOVOSPLIT+ 7x 7x1.5 UD-UF
B Elementary Duct (7x1.5)
Crush resistance 5% (according to IEC 61386-24): ~ 1700 N Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD
**Option pre-lubrication: UF
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Green RAL 6017, Brown RAL 8011
Grey RAL 7031, White RAL 9010
Red RAL 3016, Yellow RAL 1023
Blue RAL 5015
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct: “ 0000 m – Date ” (every 1 m)
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 7*7x1.5*UD ”( every 1 m )
“ 0000 m WAVIN 35 Novosplit+ 7*7x1.5*UF ”( every 1 m )
4 PACKAGING
Lost wooden drum ( 1400 x 800 x 600 ) mm.
Length: 1000 m.
Lost wooden drum ( 1600 x 800 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ -165–ANG-1-SEAS– 2014-03-03
1 / 2
NOVOSPLIT+ 6x 20x2.5 UT PROVISIONAL
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 1000 N Weight: ~ 1052 kg/km
Maximum pulling force (on microducts): ~ 1332 daN
Bending radius (20°C): ~ 1100 mm
Kink radius (according to IEC 60794-1-21): > 620 mm
Note: Smaller bending ratio can be used after cutting the outer sheath.
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 20 -0.0/+0.3 2.5 -0.0/+0.4 Thickness (mm)
Assembly sheath 2 1 ± 0.2
Width (mm) Height (mm) Total assembly sheath 2
57 -0.4/+1.3 52 -0.4/+1.0
1
2
TECHNICAL DATA SHEET SPLIT+ -165–ANG-1-SEAS– 2014-03-03
2 / 2
NOVOSPLIT+ 6x 20x2.5 UT PROVISIONAL
B Elementary Duct (20x2.5)
Crush resistance 5% (IEC 61386-24): > 1000 N
Maximum pulling force: ~ 222 daN
Nominal hydrostatic pressure resistance: PN 17 Pre-lubrication class: UT
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Black with 6 stripes Blue RAL 5015
Black with 6 stripes Orange RAL 2003
Black with 6 stripes Green RAL 6017
Black with 6 stripes Brown RAL 8011
Black with 6 stripes White RAL 9010
Black with 6 stripes Grey RAL 7031
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 6*20x2.5*UT Date ”
( every 1 m ) ** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1400 x 1000 ) mm.
Length: 800 m.
TECHNICAL DATA SHEET SPLIT+ 012-ANG-b – 2015-12-07
1 / 2
NOVOSPLIT+ 6x 16x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 1500 N
Nominal weight: ~ 602 kg/km
Maximum pulling force (on ducts): ~ 7860 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 16 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
45.2 ±0.7 41.5 ±0.6
1
2
TECHNICAL DATA SHEET SPLIT+ 012-ANG-b – 2015-12-07
2 / 2
NOVOSPLIT+ 6x 16x2 UD
B Elementary duct (16x2)
Crush resistance (IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 1310 N
Nominal hydrostatic pressure resistance: PN 17
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing) Elementary duct*: Blue RAL 5015, Orange RAL 2003, Green RAL 6017
Brown RAL 8011, Grey RAL 7031, White RAL 9010
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4 smalls stripes pink RAL 4003.
3 MARKING Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 6*16x2*UD YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING Lost wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET NOVOSP+ –041–ANG-1– 2012-03-07
1/3
NOVOSPLIT+ 6 X 14*2 UD
*4 stripes on the duct at 90°
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to NF EN 50086-2-4): ~ 1800 N
Minimum bending radius (on drum): ~ 0.65 m
Weight: ~ 574 kg/km Maximum pulling force (on microducts): ~ 678 daN
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct* 1 14 ±0.1 2 ±0.1
Total assembly sheath 2 44 ±0.7 1 ±0.2
1
2
TECHNICAL DATA SHEET NOVOSP+ –041-ANG-1– 2012-03-07
2 / 3
NOVOSPLIT+ 6 X 14*2 UD
Impact resistance
SPEC.TECHN-003-FRA-1 / IEC 60794-5-10
Punching resistance
SPEC.TECHN-003-FRA-1
- 25°C + 50°C - 5°C + 50°C
19 Joules 18 Joules 12 Joules 7 Joules
B Elementary Duct* (14*2)
Crush resistance 5% (NF EN 50086-2-4): ~ 1000 N Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20
Minimum bending radius (on drum): ~ 260 mm
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Natural with 4 smalls stripes Red RAL 3016
Natural with 4 smalls stripes Yellow RAL 1023
Natural with 4 smalls stripes Blue RAL 5015
Natural with 4 smalls stripes Violet RAL 4005
Natural with 4 smalls stripes Green RAL 6017
Natural with 4 smalls stripes White RAL 9010
Assembly sheath: Opaque Violet RAL 4005
TECHNICAL DATA SHEET NOVOSP+ –041-ANG-1– 2012-03-07
3 / 3
NOVOSPLIT+ 6 X 14*2 UD
3 MARKING
Elementary duct: “ Metering – Date ” ( every 10 cm)
Assembly sheath: “ 0000m WAVIN 35 NOVOSPLIT+ 6x14*2*UD Date ” ( every 1 m )
4 PACKAGING
Lost Wooden drum ( 2200 x 1300 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 241-ANG – 2017-01-11
1 / 3
NOVOSPLIT+ 6x 10x2 UD +1x 16x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ≥ 750 N Nominal weight: ~ 896 kg/km
Maximum pulling force (on ducts): ~ 5810 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 10 ± 0.1 2 ±0.1 Central duct 2 16 ± 0.1 2 ±0.1
Assembly sheath 3 0.75 ± 0.2
Total assembly sheath 3 Width (mm) Height (mm)
37.5 ±0.7 33.5 ±0.7
2
3
1
TECHNICAL DATA SHEET SPLIT+ 241-ANG – 2017-01-11
2 / 3
NOVOSPLIT+ 6x 10x2 UD +1x 16x2 UD
B Elementary duct (10x2) Crush resistance (IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 750 N
Nominal hydrostatic pressure resistance: PN 29
Pre-lubrication class: UD
C Central duct (16x2)
Crush resistance (IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 1310 N Nominal hydrostatic pressure resistance: PN 17
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Red RAL 3016, Green RAL 6017, Blue RAL 5015
Yellow RAL 1023, White RAL 9010, Grey RAL 7031
Central duct*: Orange RAL 2003
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
TECHNICAL DATA SHEET SPLIT+ 241-ANG – 2017-01-11
3 / 3
NOVOSPLIT+ 6x 10x2 UD +1x 16x2 UD
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Central duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 6*10x2*UD + 1*16x2*UD
YYYY/MM/DD ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ 170–ANG-2-BUCH – 2014-03-11
1 / 3
NOVOSPLIT+ 5x 20x2 UT + 1x 14x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 1600 N
Nominal weight: ~ 859 kg/km
Maximum pulling force (on microducts): ~ 1043 daN
Impact resistance
SPEC.TECHN-003-FRA-1 / IEC 60794-5-10
Punching resistance
SPEC.TECHN-003-FRA-1
- 25°C + 50°C - 5°C + 50°C
45 Joules 30 Joules 15 Joules 10 Joules
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 20 -0.0/+0.3 2 -0.0/+0.4 Central duct 2 14 ±0.1 2 ±0.1
Total assembly sheath 3 56 -0.5/+1.1 1.1 ± 0.2
2
3
1
TECHNICAL DATA SHEET SPLIT+ 170–ANG-2-BUCH – 2014-03-11
2 / 3
NOVOSPLIT+ 5x 20x2 UT + 1x 14x2 UD
B Elementary duct (20x2)
Crush resistance at 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1860 N
Nominal hydrostatic pressure resistance: PN 14
Pre-lubrication class: UT
C Central duct (14x2) Crush resistance at 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Black RAL 9017 with 1 stripe Green RAL 6017
Black RAL 9017 with 2 stripes Green RAL 6017
Black RAL 9017 with 3 stripes Green RAL 6017
Black RAL 9017 with 4 stripes Green RAL 6017
Black RAL 9017 with 5 stripes Green RAL 6017
Central duct*: Black RAL 9017
Assembly sheath*: Opaque Red RAL 3016
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
TECHNICAL DATA SHEET SPLIT+ 170–ANG-2-BUCH – 2014-03-11
3 / 3
NOVOSPLIT+ 5x 20x2 UT + 1x 14x2 UD
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Central duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 5*20x2*UT + 1*14x2*UD
Stadtwerke Breitband Glasfaser Date ” ( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 2400 x 1400 x 1000 ) mm.
Length: 500 m.
TECHNICAL DATA SHEET SPLIT+ 228-ANG – 2016-05-12
1 / 3
NOVOSPLIT+ 5x 16x2 UD + 1x 12x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ≥ 750 N
Nominal weight: ~ 610 kg/km
Maximum pulling force (on microducts): ~ 9030 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 16 ± 0.1 2 ± 0.1 Central duct 2 12 ±0.1 2 ±0.1
Assembly sheath 3 1 ± 0.2
Total assembly sheath 3 Width (mm) Height (mm)
44.7 ±0.7 43.5 ±0.7
2
3
1
TECHNICAL DATA SHEET SPLIT+ 228-ANG – 2016-05-12
2 / 3
NOVOSPLIT+ 5x 16x2 UD + 1x 12x2 UD
B Elementary duct (16x2)
Crush resistance (according to IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 1310 N Nominal hydrostatic pressure resistance: PN 17
Pre-lubrication class: UD
C Central duct (12x2)
Crush resistance (according to IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 940 N Nominal hydrostatic pressure resistance: PN 23
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Blue RAL 5015, Orange RAL 2003, Green RAL 6017
Brown RAL 8011, Red RAL 3016
Central duct*: White RAL 9010
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary
ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017
with 4 smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Central duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 5*16x2*UD + 1*12x2 YYYY/MM/DD ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
TECHNICAL DATA SHEET SPLIT+ 228-ANG – 2016-05-12
3 / 3
NOVOSPLIT+ 5x 16x2 UD + 1x 12x2 UD
4 PACKAGING
Lost Wooden drum ( 2400 x 1400 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 084-ANG-TWIST – 2015-04-09
1 / 2
NOVOSPLIT+ 5x 14x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 4300 N Weight: ~ 438 kg/km
Maximum pulling force (on microducts): ~ 5650 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
43.5 ±0.7 27.6 ±0.6
1
2
TECHNICAL DATA SHEET
SPLIT+ 084-ANG-TWIST – 2015-04-09
2 / 2
NOVOSPLIT+ 5x 14x2 UD
B Elementary Duct (14x2)
Crush resistance 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Yellow RAL 1023, Green RAL 6017
Red RAL 3016, Blue RAL 5015
White RAL 9010
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct: “ 0000 m – Date ” (every 1 m)
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 5*14x2*UD Date ” (every 1 m)
4 PACKAGING Lost Wooden drum ( 1900 x 1000 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 239-ANG-SINSHEIM – 2016-11-23
1 / 2
2
NOVOSPLIT+ 4x 20x2.5 UT
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 20 -0.0/+0.3 2.5 -0.0/+0.4 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
56.2 -0.4/+1.3 41.5 -0.4/+1.0
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 750 N
Weight: ~ 686 kg/km Maximum pulling force (on novolub): ~ 8880 N
1
TECHNICAL DATA SHEET
SPLIT+ 239-ANG-SINSHEIM – 2016-11-23
2 / 2
NOVOSPLIT+ 4x 20x2.5 UT
B Elementary Duct (20x2.5)
Crush resistance 5% (IEC 61386-24): > 1000 N
Maximum pulling force: ~ 2220 N
Nominal hydrostatic pressure resistance: PN 17 Pre-lubrication class: UT
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Blue RAL 5015 with 1 small stripe Green RAL 6017
Red RAL 3016 with 1 small stripe Green RAL 6017
Yellow RAL 1023 with 1 small stripe Green RAL 6017
Green RAL 6017
Assembly sheath: Opaque Green RAL 6017
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 4*20x2.5*UT YYYY/MM/DD ”
(every 1m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 070-ANG – 2015-12-08
1 / 2
NOVOSPLIT+ 4x 16x2 UD
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 16 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
45.2 ± 0.7 33.5 ± 0.6 1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ≥ 750 N
Weight: ~ 416 kg/km
Maximum pulling force (on microducts): ~ 5240 N
1
2
TECHNICAL DATA SHEET SPLIT+ 070-ANG – 2015-12-08
2 / 2
NOVOSPLIT+ 4x 16x2 UD B Elementary Duct (16x2)
Crush resistance (IEC 60794-5-10): 1000 N
Maximum pulling force: ~ 1310 N
Nominal hydrostatic pressure resistance: PN 17
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing) Elementary duct*: Blue RAL 5015, Orange RAL 2003
Green RAL 6017, Brown RAL 8011
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4 smalls stripes pink RAL 4003.
3 MARKING Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 4*16x2*UD YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING Lost wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 2000 m.
Lost wooden drum ( 1900 x 1000 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ –020–ANG-1– 2011-01-07
1 / 2
NOVOSPLIT+ 4x 14x2 UD PROVISIONAL
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Central duct 2 6 ± 0.1 1 ± 0.1
Total assembly sheath 3 36 ± 0.7 1 ± 0.1
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to NF EN 50086-2-4): > 450 N
Weight: ~ 417 kg/km Maximum pulling force (on microducts): ~ 475 daN
B Elementary Duct (14x2) Crush resistance 5% (NF EN 50086-2-4): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
1
2
3
TECHNICAL DATA SHEET SPLIT+ –020–ANG-1– 2011-01-07
2 / 2
NOVOSPLIT+ 4x 14x2 UD PROVISIONAL
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Blue RAL 5015, Orange RAL 2003
Green RAL 6017, Brown RAL 8011
Central duct: Natural
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours for the external sheath or the elementary ducts possible in
accordance with the customer’s specification. Ex: Opaque Green RAL 6017.
3 MARKING
Elementary duct**: “ Metering – Date ” ( every 1 m )
Central duct: “ Metering – Date ” ( every 1 m )
Assembly sheath: “ 0000m WAVIN 35 Novosplit+ 4*14x2*UD Date ” ( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 2400 x 1200 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET
SPLIT+ 192-ANG-TWIST – 2015-02-26
1 / 2
NOVOSPLIT+ 4x 14x2 UD
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
39.8 ± 0.7 29.5 ± 0.6
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 2100 N
Weight: ~ 368 kg/km Maximum pulling force (on microducts): ~ 452 daN
1
2
TECHNICAL DATA SHEET
SPLIT+ 192-ANG-TWIST – 2015-02-26
2 / 2
NOVOSPLIT+ 4x 14x2 UD
B Elementary Duct (14x2)
Crush resistance 5% (NF EN 50086-2-4): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20 Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Red RAL 3016, Green RAL 6017
Blue RAL 5015, Yellow RAL 1023
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 4*14x2*UD Date ” (every 1 m) ** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 1900 x 1000 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 133–ANG-TWIST – 2015-04-14
1 / 2
NOVOSPLIT+ 4x 7x1.5 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): ~ 1500 N
Weight: ~ 134 kg/km
Maximum pulling force (on microducts): ~ 1520 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
20.7 ± 0.7 15.5 ± 0.6
1
2
TECHNICAL DATA SHEET
SPLIT+ 133–ANG-TWIST – 2015-04-14
2 / 2
NOVOSPLIT+ 4x 7x1.5 UD
B Elementary Duct (7x1.5) Crush resistance 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Red RAL 3016, Green RAL 6017
Blue RAL 5015, Yellow RAL 1023
Assembly sheath: Opaque Orange RAL 2003
3 MARKING Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 4*7x1.5*UD Date ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING Lost Wooden drum ( 1400 x 800 x 600 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 240-ANG-SINSHEIM – 2016-11-23
1 / 2
NOVOSPLIT+ 3x 20x2.5 UT
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 450 N
Nominal weight: ~ 526 kg/km
Maximum pulling force (on novolub): ~ 6660 N
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 20 -0.0/+0.3 2.5 -0.0/+0.4 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
41.5 -0.4/+1.0 38.9 -0.4/+1.0
2
1
TECHNICAL DATA SHEET
SPLIT+ 240-ANG-SINSHEIM – 2016-11-23
2 / 2
NOVOSPLIT+ 3x 20x2.5 UT
B Elementary duct (20x2.5) Crush resistance at 5% (IEC 61386-24): > 1000 N
Maximum pulling force: ~ 2220 N
Nominal hydrostatic pressure resistance: PN 18
Pre-lubrication class: UT
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Blue RAL 5015 with 1 small stripe Grey RAL 7031
Red RAL 3016 with 1 small stripe Grey RAL 7031
Green RAL 6017 with 1 small stripe Grey RAL 7031
Assembly sheath: Opaque Grey RAL 7031
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 3*20x2.5*UT YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 2100 x 1100 x 1000 ) mm.
Length: 1200 m.
TECHNICAL DATA SHEET
SPLIT+ 010-ANG-TWIST – 2015-04-14
1 / 2
NOVOSPLIT+ 3x 16x2 UD
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ~ 1800 N
Nominal weight: ~ 320 kg/km
Maximum pulling force (on ducts): ~ 393 daN
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 16 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
33.5 ±0.6 31.5 ±0.6
1
2
TECHNICAL DATA SHEET
SPLIT+ 010-ANG-TWIST – 2015-04-14
2 / 2
NOVOSPLIT+ 3x 16x2 UD
B Elementary duct (16x2)
Crush resistance at 5% (IEC 61386-24): ~ 800 N
Maximum pulling force: ~ 1310 N Nominal hydrostatic pressure resistance: PN 17
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Blue RAL 5015, Green RAL 6017, Red RAL 3016
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct**: “ 0000 m – Date ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 3*16x2*UD Date ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost Wooden drum ( 1800 x 1200 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET
SPLIT+ 162-ANG-a-3066011 – 2015-02-25
1 / 2
NOVOSPLIT+ 3x 14x2 UD (SAP article 3066211)
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 450 N
Nominal weight: ~ 284 kg/km Maximum pulling force (on ducts): ~ 339 daN
Component Key number Nominal outside
diameter (mm)
Nominal
thickness (mm)
Elementary duct 1 14 ± 0.1 2 ±0.1 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
29.5 ±0.6 27.7 ±0.6
2
1
TECHNICAL DATA SHEET
SPLIT+ 162-ANG-a-3066011 – 2015-02-25
2 / 2
NOVOSPLIT+ 3x 14x2 UD (SAP article 3066211)
B Elementary duct (14x2)
Crush resistance at 5% (IEC 61386-24): ~ 1500 N
Maximum pulling force: ~ 1130 N Nominal hydrostatic pressure resistance: PN 20
Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct: Blue RAL 5015, Red RAL 3016, Green RAL 6017
Assembly sheath: Opaque Orange RAL 2003
3 MARKING
Elementary duct: “ 0000 m – Date ” (every 1 m)
Assembly sheath: “ 0000 m WAVIN 35 Novosplit+ 3*14x2*UD Date ” (every 1 m)
4 PACKAGING Lost Wooden drum ( 1600 x 800 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 229-ANG – 2016-05-12
1 / 2
2
NOVOSPLIT+ 2x 20x2.5 UT
Component Key number Nominal outside diameter
(mm)
Nominal thickness
(mm)
Elementary duct 1 20 -0.0/+0.3 2.5 -0.0/+0.4 Assembly sheath 2 0.75 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
41.5 -0.4/+1.3 21.5 -0.4/+0.7
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+
Crush resistance at 5% (according to IEC 61386-24): > 1000 N Nominal weight: ~ 366 kg/km
Maximum pulling force (on novolub): ~ 4440 N
1
TECHNICAL DATA SHEET SPLIT+ 229-ANG – 2016-05-12
2 / 2
NOVOSPLIT+ 2x 20x2.5 UT
B Elementary Duct (20x2.5)
Crush resistance 5% (IEC 61386-24): > 1000 N
Maximum pulling force: ~ 2220 N
Nominal hydrostatic pressure resistance: PN 18 Pre-lubrication class: UT
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Black with 1 stripes Opaque Master batch Green
Black with 2 stripes Opaque Master batch Green
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – YYYY/MM/DD ” (every 1 m)
Assembly sheath**: “ 0000 m WAVIN 35 NOVOSPLIT+ 2*20x2.5*UT YYYY/MM/DD ”
(every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 1600 x 800 x 1000 ) mm.
Length: 1000 m.
TECHNICAL DATA SHEET SPLIT+ 001-ANG-a – 2014-06-11
1 / 2
NOVOSPLIT+ 2x 14x2 UD
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 14 ± 0.1 2 ± 0.1 Assembly sheath 2 1.0 ± 0.2
Width (mm) Height (mm) Total assembly sheath 2
30 ± 0.6 16 ± 0.5
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ~ 4300 N
Weight: ~ 217 kg/km
Maximum pulling force (on microducts): ~ 226 daN
Impact resistance
SPEC.TECHN-003-FRA-1 / IEC 60794-5-10
Punching resistance SPEC.TECHN-003-FRA-1
- 25°C + 50°C - 5°C + 50°C
19 Joules 9 Joules 10 Joules 7 Joules
2
1
TECHNICAL DATA SHEET SPLIT+ 001-ANG-a – 2014-06-11
2 / 2
NOVOSPLIT+ 2x 14x2 UD
B Elementary Duct (14x2)
Crush resistance 5% (IEC 61386-24): ~ 1000 N
Maximum pulling force: ~ 1130 N
Nominal hydrostatic pressure resistance: PN 20 Pre-lubrication class: UD
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Green RAL 6017, Red RAL 3016
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 2*14x2*UD Date ”
( every 1 m )
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Lost wooden drum ( 1300 x 520 x 500 ) mm.
Length: 1000 m.
Lost wooden drum ( 1600 x 800 x 1000 ) mm.
Length: 2000 m.
TECHNICAL DATA SHEET SPLIT+ 180-ANG – 2014-06-11
1 / 2
2
NOVOSPLIT+ 2x 7x1.5 UD-UF PROVISIONAL
Component Key number Nominal outside
diameter
(mm)
Nominal
thickness
(mm)
Elementary duct 1 7 ± 0.1 1.5 ± 0.1 Assembly sheath 2 1 ± 0.2
Total assembly sheath 2 Width (mm) Height (mm)
16 ± 0.6 9 ± 0.5
1 CHARACTERISTICS at 23°C (Nominal average values, indicated for information)
A NOVOSPLIT+ Crush resistance at 5% (according to IEC 61386-24): ≥ 450 N
Weight: ~ 83 kg/km
Maximum pulling force (on microducts): ~ 76 daN
B Elementary Duct (7x1.5)
Crush resistance 5% (IEC 61386-24): ~ 1700 N
Maximum pulling force: ~ 380 N
Nominal hydrostatic pressure resistance: PN 31 Pre-lubrication class: UD
Option pre-lubrication class: UF
1
TECHNICAL DATA SHEET SPLIT+ 180-ANG – 2014-06-11
2 / 2
NOVOSPLIT+ 2x 7x1.5 UD-UF PROVISIONAL
2 COLOUR IDENTIFICATION (see drawing)
Elementary duct*: Natural with 4 smalls stripes Green RAL 6017
Natural with 4 smalls stripes Red RAL 3016
Assembly sheath*: Opaque Orange RAL 2003
* Option: other colours and stripes possible for the external sheath or elementary ducts
in accordance with the customer’s specification. Ex: Opaque Green RAL 6017 with 4
smalls stripes pink RAL 4003.
3 MARKING
Elementary duct**: “ 0000 m – Date ” ( every 1 m )
Assembly sheath**: “ 0000 m WAVIN 35 Novosplit+ 2*7x1.5*UD Date ” (every 1 m)
“ 0000 m WAVIN 35 Novosplit+ 2*7x1.5*UF Date ” (every 1 m)
** Option: numbering and/or specific text in accordance with customer’s specification.
4 PACKAGING
Watertight wooden drum ( 1300 x 520 x 460 ) mm.
Length: 2000 m.
Watertight wooden drum ( 1000 x 520 x 460 ) mm.
Length: 500 m.