re

d o

ra

ng

er

ed

ora

ng

er

ed vio

let

y e l lo w o r a n g ey e l lo w

gr

ee

n

violetblue violet

bl

ue

gr

ee

n

yello

w

green

blue

brown.0

.13

.1.11

.8

.22.2

.5.6 .66

.14.29

.46.44

.34.4

.3.03.04

re

d o

ra

ng

er

ed

ora

ng

er

ed vio

let

y e l lo w o r a n g ey e l lo w

gr

ee

n

violetblue violet

bl

ue

gr

ee

n

yello

w

green

blue

brown.0

.13

.1.11

.8

.22.2

.5.6 .66

.14.29

.46.44

.34.4

.3.03.04

Additional colours that can be used as a toner

9.0, 10.0, 9.03, 10.3, 9.1, 10.1, 9.11, 10.11, 9.13, 10.13, 9.14, 10.14, 9.3, 10.3

Primary Colours these cannot be created by mixing other colours:

blue yellow red

Secondary Colours Created by mixing two primary colours in equal.

yellow+blue=green blue+red=violet red+yellow=orange

Complementary Colours opposite each other on the colour wheel when mixed together, they will neutralise each other and eliminate the undesired tone, brown is intended for natural.

yellow+violet=neutral red+green=neutral blue+orange=neutral

Colour Wheel Mixing Ratios and Timing

desired result Mixing ratio developer timing

demi 1:2 3.5 vol 20–25 minutes

Permanent 1:1.5 10 vol–40 vol 30–40 minutes

Superlightener 1:2 40 vol 40–50 minutes

Colour bath 1:3 3.5 vol visual timing

Developer

3.5 vol deposit only tone on tone demi

10 vol 1 level of lift deposit Colour

20 vol 1–2 levels of liftgrey Coverage normal Colouring

30 vol 2–3 levels of liftSuperlightener intense Colouring

40 vol 3–5 levels of lift Superlightener

Underlying Pigments – Counteracting Colours

natural level of Hair

underlying Pigment

Counteracting Colour

10 lightest blonde Palest yellow violet

9 very light blonde Pale yellow violet

8 light blonde yellow orange violet blue

7 blonde orange yellow blue violet

6 dark blonde orange blue

5 light brown red orange green blue

1–4 black to brown red green

Tip: You also must consider the underlying pigment of the artificial colour.

Tint Back 2 Step – Methodology

1. Choose the target level carefully. Proceed to choose corresponding filler.

2. Mix equal parts of the filler chosen with water. (1 part colour + 1 part water) mix well until it becomes creamy.

3. Apply on to dry hair evenly through the lighter sections. Once finished, dry hair off completely. This will finish your filling process.

4. Proceed to apply your target shade.

Tip 1: If hair is too porous, apply Fanola Nutricare Restructuring Spray Mask.

Tip 2: This method is only for people who wish to go back to their natural level permanently.

Tip 3: This method is not recommended for people who wish to change colour frequently.

White/Grey Coverage

natural .0 - designed for the clients with no resistant white/grey hair.

Tip 1: Always use one shade darker for white/grey coverage. Natural .00 – Designed for clients with very resistant white/grey hair.

Tip 2: Always use one shade lighter for white/grey coverage. Natural Warm .03 – Will give more of a translucent result with warmth.

2 Step Tint Back – Filling the missing underlying pigments

target level underlying Pigmentrecommended Filler

8 light blonde yellow orange 9.3

7 blonde orange yellow 8.43

6 dark blonde orange 7.4

5 light brown red orange 6.6 + 6.4

4 Medium brown red 5.6

1–3 black to brown red 4.6

Toning

toner Mixing ratio timing tone on tone intense toning

beige 1:2 5–10 minutes 3.5 vol 10 vol

Silver 1:2 5–10 minutes 3.5 vol 10 vol

natural 1:2 5–10 minutes 3.5 vol 10 vol

Fanola Powder Lightener - Lifts up to 7 levels

direction: Mix 1 part Powder lightener (30 grams) + 2 parts of developer (60 grams).

For on scalp use: 1 part Powder lightener (30 grams) + 2 parts of 20 voldeveloper (60 grams).

For off scalp use: 1 part Powder lightener (30 grams) + 2 parts of developer (60 grams).

Tip: If you prefer the Powder Lightener to be of a thick consistency, try the following ratio 1:1.5.

Kit Cleaner - Artificial pigment removal for removing unwanted tones/reflects or if the colour is too dark

1. Mix equal parts of 1a and 1b.

2. apply to dry unwashed hair. Massage the product into the hair starting from the ends working towards the regrowth area.

3. wrap the hair and leave in for 5–15 minutes.

4. rinse off product thoroughly from the hair. use Shampoo Cleaner and distribute evenly all over the hair. repeat for a second time.

5. if hair has not come up to the desired level, dry the hair and apply Kit Cleaner again.

Tip: For better results, it is advised to do a colour bath at the basin. Make sure not to touch the hair that does not need this procedure. Doing this will ensure that you have completely removed all old colour.

teCHniCal CHartwww.Fanola.CoM.au