tec 7 - technical data sheet - real safety...shelf life applications title tec 7 - technical data...

1
Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861 Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861 • SEALING - ADHESIVE BONDING - ASSEMBLING WITH 1 PRODUCT • Unique bonding capacity • High UV and fungus resistance • Fast curing • Cures shrink-free • Permanently flexible and resists vibrations • Adheres to both wet and dry substrates • Applicable both indoors and outdoors Flow Skin formation Tack-free Full hardening E-modulus 100% Electric resistance Volume shrinkage after curing Hardness - DIN 53505 Tensile strength Tear strength - DIN 53504 Thermal stability Elongation at break - DIN 53504 Air permiability (according to report 3P02093 of the SP TRI in Sweden) Toxicity 5 bar / 3 mm / 23°C 140g/min 23°C 50% R.V. 8 minutes 23°C 50% R.V. 25 minutes 23°C 50% R.V. 25 h - 6 mm 172N/cm 2 / 1.72 Mpa 10 10 < 3% 60 Shore A 265/cm 2 / 2.65 Mpa 140N/cm 2 / 1.40 Mpa -30°C tot +95°C /peak: 155°C max. 30 minutes > 350% > 0,2m³/m² Non-toxic. 48 h - 7 mm 72 h - 8 mm Good Moderate Poor water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes esters, ketones, aromatics concentrated acids, chlorinated solvents, chlorine of swimming pools 12 months. • For all applications: in the construction and sanitary sectors and general maintenance. TEC7 replaces mounting, wood and PU adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive, butyl caulking. • As a universal adhesive, TEC7 adheres to most substrates and does not attack synthetic materials. • To mirrors (vertical adhesive beads), natural stone (does not bleed through), polyester, polystyrene foam, moist substrates, even under water. • Overpaintable with most common paints. • Alkyd resin-based lacquer, applied to TEC7, can have a slower drying process. • TEC7 has lower adhesion on PP, PE, bitumen and silicones. TEC 7 Technical data sheet Technical information Properties Chemical Resistance Shelf life Applications

Upload: others

Post on 05-May-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: TEC 7 - technical data sheet - Real Safety...Shelf life Applications Title TEC 7 - technical data sheet Author Torben Created Date 4/10/2017 10:58:20 AM

Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

• SEALING - ADHESIVE BONDING - ASSEMBLING WITH 1 PRODUCT• Unique bonding capacity• High UV and fungus resistance• Fast curing• Cures shrink-free• Permanently flexible and resists vibrations• Adheres to both wet and dry substrates• Applicable both indoors and outdoors

Flow

Skin formation

Tack-free

Full hardening

E-modulus 100%

Electric resistance

Volume shrinkage after curing

Hardness - DIN 53505

Tensile strength

Tear strength - DIN 53504

Thermal stability

Elongation at break - DIN 53504

Air permiability (according to

report 3P02093 of the

SP TRI in Sweden)

Toxicity

5 bar / 3 mm / 23°C 140g/min

23°C 50% R.V. 8 minutes

23°C 50% R.V. 25 minutes

23°C 50% R.V. 25 h - 6 mm

172N/cm2 / 1.72 Mpa

1010

< 3%

60 Shore A

265/cm2 / 2.65 Mpa

140N/cm2 / 1.40 Mpa

-30°C tot +95°C /peak: 155°C max. 30 minutes

> 350%

> 0,2m³/m²

Non-toxic.

48 h - 7 mm

72 h - 8 mm

Good

Moderate

Poor

water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes

esters, ketones, aromatics

concentrated acids, chlorinated solvents, chlorine of swimming pools

12 months.

• For all applications: in the construction and sanitary sectors and general maintenance. TEC7 replaces mounting, wood and PU adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive, butyl caulking.• As a universal adhesive, TEC7 adheres to most substrates and does not attack synthetic materials.• To mirrors (vertical adhesive beads), natural stone (does not bleed through), polyester, polystyrene foam, moist substrates, even under water.• Overpaintable with most common paints.• Alkyd resin-based lacquer, applied to TEC7, can have a slower drying process.• TEC7 has lower adhesion on PP, PE, bitumen and silicones.

TEC 7Technical data sheet

Technical information

Properties

Chemical Resistance

Shelf life

Applications