te103685 - 2017-08-02t02:46:43z 760180034
TRANSCRIPT
FINISH MATERIAL
TITLEDRAFTER
CHECKER
ENGINEER DOCUMENT NO.
SHEET
© 2016 CommScope, Inc. ConfidentialNOTICE: These drawings and specifications are the proprietary property of COMMSCOPE, INC.and may be used only for the specific purpose authorized in writing by COMMSCOPE, INC.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
SAP-ENTERPRISE-A1-2014.FRM
SIZE SCALE
TOLERANCES SAP MATERIAL MASTER
COMMSCOPE, INC.
SYMB
OLOG
Y AG
REES
WIT
H AS
MEY1
4.5M
- 2
009.
AL
L SH
EETS
AR
E TH
E SA
ME R
EVIS
ION
AND
STAT
US.
PAUL LIU ASSEMBLY
DISTRIBUTION MODULE CAT5E PANELGORDON SPISANY
PAUL LIU A1 3/16 A13RH3659 ECN 8000006210
ALL SURFACES WORK AREA: 52 MODEL DRAWING
1 OF 3VERSION STATUS REVISION VERSION STATUS REVISION
00 03 RE D
DENSITY g/mm3
MASS kg
VOLUME mm3
SURFACE AREA mm2
HEIGHT mm
LENGTH mm
WIDTH mm
NOTES: 1. THIS IS A PRO/ENGINEER DATABASE. THE ROOT FILE NAME IS A13RH3659 . 2. ITEMS REFERENCING THIS NOTE ARE SHIPPED LOOSE, NOT ASSEMBLED. 3. WHEN SHIPPED, FOUR OF 847079902 SHALL BE PLACED INTO A BAG AS 847773983. 4. REAR LABEL B (ITEM 7) SHALL BE ASSEMBLED INTO THE REAR HOUSING OF THE MODULE (ITEM 5) WITH THE TEXT ORIENTED UPRIGHT WHEN THE MODULE IS ORIENTED WITH THE PLUG LATCHES AT THE BOTTOM. 5. 860574797 CAN BE ORDERED AS 760199760. 6. THE COUNTRY OF ORIGIN LABEL SHALL BE PER A09OH3071.THE LABEL SHALL BE APPLIED TO THE BACK OF THE PANEL FRAME (ITEMS 1, 2, 3, AND 4) SUCH THAT IT IS VISIBLE WHEN THE MODULES (ITEM 5) ARE INSTALLED. 7. ITEM 12, 14 SHALL BE LOCATED APPROXIMATELY AS SHOWN IN SHEETS 1 AND 2. 8. ITEM 16 AND 17 SHALL BE INSTALLED ON THE PANEL MODULES FOR 760180000 ,760180018, 760180026 AND 760180034, SEE SHEETS 1 AND 2. 9. THIS PRODUCT SHALL MEET THE REQUIREMENTS OF CTV-72-004 . 10. A MANUFACTURING DATE CODE LABEL SHALL BE PLACED ON THE PRODUCT. THE CODE CAN BE PRINTED ON LABEL 860550169 OR A SIMILAR LABEL THAT IS APPROVED BY COMMSCOPE R&D . THE CODE CAN ALSO BE PRINTED ON AN EXISTING LABEL SUCH AS THE COUNTRY OF ORIGIN LABEL OR SECURITY LABEL. THE LABEL NEEDS TO BE PLACED ON THE REAR SIDE OF THE PANEL FRAME IN A LOCATION THAT WILL STILL BE VISIBLE AFTER MODULES ARE INSTALLED. THE PRINT CODE SHALL BE ESTABLISHED SUCH THAT THE PRODUCT CAN BE TRACED BACK TO THE YEAR, THE WEEK, AND THE LOCATION OF MANUFACTURE. FOR EXAMPLE, IF THE PRODUCT IS MADE BY ANDREW IN REYNOSA ON THE 14TH WEEK OF 2013, THE CODE MIGHT BE 13RMX14, WHERE 13 IS USED FOR 2013, RMX IS THE LOCATION CODE, AND 14 IS USED FOR THE 14TH WEEK. LABEL 860537448 CAN BE USED BY SUZHOU AND CONTAINS THE PRE-PRINTED "ASZ" ON THE LABEL AND LABEL 860458536 CAN BE USED BY GOA AND CONTAINS THE PRE-PRINTED "GI" ON THE LABEL. 11. THE CE LABEL SHALL BE ADHERED TO THE BACK OF THE PANEL FRAME (ITEM 1, 2, 3, OR 4). THE LABEL NEEDS TO BE VISIBLE AFTER ALL MODULES HAVE BEEN FULLY ASSEMBLED INTO THE FRAME, AND IT IS RECOMMENDED THAT THE LABEL BE PLACED BETWEEN ONE SET OF THE PANEL MOUNTING HOLES LOCATED ON THE OUTERMOST ENDS OF THE PANEL. THE LABEL SHALL BE POSITIONED PARALLEL TO THE EDGE OF THE FRAME AND SHOULD NOT TOUCH THE EDGE OF THE FRAME OR THE SIDE OF A MODULE. THE CE LABEL SHOULD NOT COVER UP ANY OTHER MARKINGS OR LABELS. THE LABEL EDGES SHOULD BE PARALLEL TO THE EDGES OF THE MODULE AND SHOULD NOT OVERHANG ANY OF THE EDGES ON THE SIDE OF THE MODULE. IT IS RECOMMENDED THAT THE MANUFACTURING LOCATION ESTABLISH A CONSISTENT LABEL POSITIONING PRACTICE WITH REGARD TO THE LABEL PLACEMENT AND ORIENTATION.
6
7 8
16
12
17
760180018
2
10
5
16
12
5
7 8
6
760180000
10
1
STOCKLIST*
760180000
CPP-5E-DM-1U-24
760180018
CPP-5E-DM-2U-48
760180026
CPPA-5E-DM-1U-24
760180034
CPPA-5E-DM-2U-48
ITEM COMCODE IDENT NO. DESCRIPTION REFNOTE
QTY QTY QTY QTYSYM NO.
1 860555119 UNIVERSAL CAT5E FRAME 1U 1
2 860555127 UNIVERSAL CAT5E FRAME 2U 1
3 860555135 ANGLED UNIVERSAL CAT5E FRAME 1U 1
4 860555143 ANGLED UNIVERSAL CAT5E FRAME 2U 1
5 860553171 ASSEMBLY, UNP-U-510 MODULE BLACK 4 8 4 8
6 860509439 RETENER B,360 REAR CABLE MANANGMENT 2 1 2 1 2
7 860058379 LABEL, REAR, B 4 4 8 4 8
8 860058387 LABEL, REAR, A 2 4 8 4 8
9 860574797 MANAGER, TERMINATION, 4-HOLE, BAG OF 28 2,5 1 2 1 2
10 860551076 LABEL HOLDER 4 8 4 8
11 847079902 SCREW, COMBO HD. MACHINE, #12-24 X 0.50" 2,3 4 4 4 4
12 860469428 LABEL MODE IN MEXICO 6,7 1 1 1 1
13 401682273 CABLE TIE 2 4 8 4 8
14 860459346 LABEL, PATENT, M2000 7 1 1
15 860633169 INSTRUCTIONS, CPP-5E-DM-TYPE PANELS 2 1 1 1 1
16 860526995 LABEL, FRONT LOWER 1-24, UNP10G 8 1 1 1 1
17 860527001 LABEL, FRONT LOWER 25-48, UNP10G 8 1 1
18 860554765 LABEL COVER 2 1 2 1 2
19 860554757 LABEL 2 1 2 1 2
20 860550169 MANUFACTRUING DATE CODE LABEL 10 1 1 1 1
21 860548189 LABEL, CE MARK 11 1 1 1 1
22 860563188 LABEL,REAR 25-PAIR 2 4 8 4 8
REVISIONS
REV DESCRIPTION DATE APPROVED
C UPDATE PANELS FOR NEWTERM. MGR.
19-JAN-2015 BJF
DECN 8000017359INSTRUCTION SHEET UPDATE, REMOVE UNIPRISE WORD
18-NOV-2016 PL
TE103685 - 2017-08-02T02:46:43Z
TITLE
DOCUMENT NO.
SHEET© 2016 CommScope, Inc. Confidential
NOTICE: These drawings and specifications are the proprietary property of COMMSCOPE, INC.and may be used only for the specific purpose authorized in writing by COMMSCOPE, INC.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
SAP-ENTERPRISE-A1-2014.FRM
SIZE SCALE
COMMSCOPE, INC.
ASSEMBLY DISTRIBUTION MODULE CAT5E PANEL
A1 3/16 A13RH3659
DRAWING
2 OF 3VERSION STATUS REVISION
03 RE D
4
10
7 8
6
16
12
17
14
5
16
3
12
5
7 8
6
14
10
760180026760180034
TE103685 - 2017-08-02T02:46:43Z
TITLE
DOCUMENT NO.
SHEET© 2016 CommScope, Inc. Confidential
NOTICE: These drawings and specifications are the proprietary property of COMMSCOPE, INC.and may be used only for the specific purpose authorized in writing by COMMSCOPE, INC.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
SAP-ENTERPRISE-A1-2014.FRM
SIZE SCALE
COMMSCOPE, INC.
ASSEMBLYDISTRIBUTION MODULE CAT5E PANEL
A1 3/16 A13RH3659
DRAWING
3 OF 3VERSION STATUS REVISION
03 RE D
760180000760180018
760180034760180026
TE103685 - 2017-08-02T02:46:43Z