tdi fcr data 9 625 47ppf n80 btc rev 6 (2)
TRANSCRIPT
-
TDI-FCR
9-5/8 (9.625) OD 47.00 lb/ft BTC N80Pipe
Plain EndWeight
WallThickness
InsideDiameter
DriftDiameter
Plain EndArea
LongitudinalPlain End Yield
InternalYield
CollapsePressure
Lbs/Ft Inches Inches Inches Sq. Inches Lb PSI PSI46.18 0.472 8.681 8.525 13.572 1,085,800 6,870 4,760
Connection PressureCoupling Outside Diameter
Standard Sp. Clearance
REGULARCouplingLength
REGULARMake-up
Loss
LongitudinalJoint Strength
(Pipe Body)
InternalPressure
ResistanceInches Inches Inches Inches Lb PSI
10.625 10.125 10.625 4.873 1,161,000 6,870
Torque Compression Bending TensionUsing MIN PFWPin Face Width
75%
Min.Ft-lb
Opt.Ft-lb
Max.Ft-lb
MaximumLb
Max.Bend
Radius
Max. Rec.SettingDepth
Est Make-Up Torque 8,500 9,650 10,500 740,000 /100 Feet S.F.Delta Torque 10,850 26,500 42,150 31 15,440
201.6
Total Torque 19,350 36,150 52,650
Note:
Delta torque is the torque applied after pin nose/center ring contact.Delta Torque is 75% of recommended to allow for Minimum PFW.Add the makeup torque to the Delta Torque to obtain the total torque.
9 Tuas Drive 1, Singapore 638676. Tel: 65-68620311 Fax: 65-6862 0313 Email: [email protected]
PAT# 7,510,219 USREV. # 6 21/03/2012
PART # TD-9.625-47.00-N80
Caution: Est Make-up Torquevalues and Final Field TorqueValues are approximation andfor guidance only.