tbe master-y3_r-2154-101h_r0 (storage tank)_20091022

8/11/2019 TBE Master-Y3_R-2154-101H_R0 (Storage Tank)_20091022

1/4

TECHENICAL BID EVALUATIONPROJECT NAME : YANBU EXPORT REFINERY PROJECT

INQUIRY NO. : R-2154-101H REVISION : 0 DISC

INQUIRY NAME : STORAGE TANKS DATE : 20-Oct-09 ST'D CU

HEC

DESCRIPTION UNIT WT(Total) WT(Total) RE

(Ton) UNIT PRICE USD (Ton)

1 TERMS & CONDITIONS

1.1 Proposal No./ Date

1.2 Delivery

1.3 Delivery Condition / Sea Port

2 COMMENT ON QUOTATION

2.1 EQUIPMENT NO.

117-D-0013 1 0.0 0.0 0.0 0.0

119-D-0008 1 0.0 0.0 0.0 0.0

119-D-0010 1 0.0 0.0 0.0 0.0

119-D-0500 1 0.0 0.0 0.0 0.0

140-D-0003 1 0.0 0.0 0.0 0.0

140-D-0004 1 0.0 0.0 0.0 0.0

142-D-0004 1 0.0 0.0 0.0 0.0

142-D-0025 1 0.0 0.0 0.0 0.0

Start-up Spare Parts(Gasket : 200%, Bolt/Nut : 10%, Min. 3sets) sets 0.0 0.0

Others 0.0 0.0

TOTAL 8 0.0 0.0 0.0

USD/Ton #DIV/0!

3 OPTION PRICES

3.1 Electric & hydro water at field Required 0.0

3.2 Foundation chipping and grouting work and material Required 0.0

3.3 Touch Up Paint BQ (m2) = [Total Surface Area for Painting (m2)] x 10% USD Required 0.0

3.4 Capital Spare Parts N/R N/A

3.5 Operation Spare Parts for two (2) years Set Required 0.0

(Gasket : 100%, Bolt/Nut : 10%, Min. 4sets) Vendor Rec.

4 SCOPE OF WORK Inclusion Exclusion Quotation Final Remarks

4.1 Mechanical Guarantee X Included

4.2 Equipment Complete Design X

4.3 Vent calculation in accordance with API 2000 X

4.4 Equipment and Material Procurement X

4.5 Material certification to be submitted X

4.6 Fabrication(shop and field), site erection and installation work X

4.7 Manufacturing and Assembly X

4.8 Internal painting/coating as per coating data sheet X

4.9Painting up to Finish Coat in accordance with Project Specification (Vendor shall Get

X

4.10 Rust Prevention for Storage X

4.11 Detail design & drawing for platform and ladder(circular stairway) X

4.12 All Sub-Vendor and Internal Vendor Coordination X

4.13 PWHT for stress relieve as per Data Sheet, Code and Standard, if required X

4.14 Impact test as per Code and Standard, if required X

4.15 Stress analysis for External force & moment X

4.16 Pre-Inspection Meeting X

4.17 Shop/field inspection and test as per standards, design code & specification X

4.18 PMI (Positive Material Identification) & Its Reports, if requested X

4.19 Hydrostatic test and calibration at site X

4.20 Chemical cleaning on the surface of stainless steel, if requested X

4.21 Cleaning tank inside after hydrotest and before final inspection X

4.22 Marking, Packing and Transportation X

4.23 Documentation as per the Requirements of this Requisition X

4.24 All documents and support for Government approval as required X

4.25 Compliance with statutory requirements, Code and Standard X

4.26Consideration of equipment design and shipping arrangements for ease of delivery to

the job siteX

4.27Local regulation approval work & all documents and certificates for government

approvalX

VENDOR NAME


2/4


INQUIRY NO. : R-2154-101H REVISION : 0 DIS

INQUIRY NAME : STORAGE TANKS DATE : 20-Oct-09 ST'D C

HEC



VENDOR NAME

4.30 Others specified in this Requisition X

4.31 Other Accessories Required for Safe Operation (Not Referred in this Requisition) X

5 SCOPE OF SUPPLY Inclusion Exclusion Quotation Final Remarks

5.1 Equipment proper X Included

5.2 Equipment with nozzles, flanges and its supports X

5.3 All internals unless otherwise noted on equipment data sheet X

5.4 Attachments for internals X

5.5 Internal pipe such as dip pipe, feed pipe, etc. and its supports X

5.6 Other parts welded on tank (wear plate, deflector, vortex breaker, etc) X

5.7 Blind flanges, bolts, nuts & gaskets for manhole, vent and drain nozzles X

5.8 Grounding lugs per drawing PIP X

5.9 Sump as per data sheet X

5.10 Oil skimmer X

5.11 Bird screen for open vent, if required X

5.12 Lifting lugs for installation and maintenance, if required X

5.13 Earth lugs X

5.14 Settlement check piece X

5.15 Name plate (Stainless Steel) with bracket X

5.16 Hot dip galvanized anchor bolt/nuts/washers X

5.17 Landing Platform(50% Roof Area) and circular stairway (hot dip galvanized grating) X

5.18 Internal flange in including bolt/nut & Gasket (Non-Asbestos sheet) X

5.19 All parts shown on applicable data sheets, standards and drawings X

5.20 Hand grip and internal ladder, if required X

5.21 Support clip for ladder, platforms X

5.22 Support clip for Pipe support, if required X5.23 Temporary support and skid for erection X

5.24 Special tools for erection & maintenance, if required X

5.25 Touch-up paint for field repair works X

5.26 Internal and external accessories for 117-D-0013

- Gauge hatch for nozzle "G" X

- Emergency vent cover for nozzle "M2" X

- Pressure/vacuum vent for nozzle "J" X

- Air sparger for nozzle "F" X

- Internal pipe for nozzle "A" X

- Caustic distributor for nozzle "B" X

- Landing platform and Circular stairway (grating type) X

- Roof handrail (All Around) X

- Internal lining and external painting (including underside of bottom plate) X5.27 Internal and external accessories for 119-D-0008

- Gauge hatch for nozzle "EM" (non-spark, self closing gauge hatch cover and

slotted gauge well)X

- Emergency vent cover for nozzle "CM" X

- Pressure/vacuum vent with flame arrester for nozzle "BV" X

- Draw-off sump (API 650 type) for nozzle "AW" X

- Stilling well for nozzle "CL", "GL" X

- Inlet distributor for nozzle "AI" X

- Skimmer sump with flexible hose for nozzle "BW" X

- Internal floating roof (metallic pontoon type) X

- Mechanical seals X

- Foam system X



- Internal lining and external painting (including underside of bottom plate) X

- Insulation support ring X


- Gauge hatch for nozzle "BM" (non-spark, self closing gauge hatch cover and slotted

gauge well)X

- Emergency vent cover for nozzle "AM" X


- Draw-off sump (API 650 type) for nozzle "CW" X


3/4


INQUIRY NO. : R-2154-101H REVISION : 0 DIS

INQUIRY NAME : STORAGE TANKS DATE : 20-Oct-09 ST'D C

HEC



VENDOR NAME

- Skimmer sump with flexible hose for nozzle "AW" X



- Foam system X






- Gauge hatch for nozzle "EM" (non-spark, self closing gauge hatch cover and slotted

gauge well)X

- Emergency vent cover for nozzle "AM" X


- Jet mixer for nozzle "BI" X

- Stilling well for nozzle "BL" X


- Skimmer sump with flexible hose for nozzle "AW" X



- Foam system X


- Roof handrail X




- Gauge hatch for nozzle "M" (non-spark, self closing gauge hatch cover with lock) X- Emergency vent cover for nozzle "C2" X

- Pressure/vacuum vent for nozzle "D" X







- Gauge hatch for nozzle "H" (non-spark, self closing gauge hatch cover with lock) X

- Emergency vent cover for nozzle "MH-2" X

- Pressure/vacuum vent for nozzle "D" X


- Roof handrail (All Around) X- External painting (including underside of bottom plate) X


- Gauge hatch for nozzle "G" (non-spark, self closing gauge hatch cover with lock) X


- Pressure/vacuum vent for nozzle "R" X

- Draw-off sump (API 650 type) for nozzle "D" X





- Gauge hatch for nozzle "G" (non-spark, self closing gauge hatch cover) X


- Pressure/vacuum vent for nozzle "V" X

- Draw-off sump (API 650 type) for nozzle "D" X



- External painting (including underside of bottom plate) X

6 HIGHLIGHT IN PROPOSAL

6.1 Activities to be confirmed before selecting the vendor

- Shop drawing for Platform & Ladder Required

- Painting including finish coat Required


4/4


INQUIRY NO. : R-2154-101H REVISION : 0 DISCIPLINE : MS

INQUIRY NAME : STORAGE TANKS DATE : 20-Oct-09 ST'D CURRENCY : USD

HEC

DESCRIPTION UNIT WT(Total) WT(Total) REMARKS


VENDOR NAME

6.2 Vendors Deviations/Clarifications

- Deviation and/or Alternative Yes or No

6.3 Special Note (if any)

7 Result of Technical Evaluation (Techenically Acceptable)

4 of 4

tbe master-y3_r-2154-101h_r0 (storage tank)_20091022

Documents