1 | P a g e

Tamil Nadu Tourism Development Corporation Limited

Tamil Nadu Tourism Complex,

Wallajah Road, Chennai –600 002

INVITATION FOR BIDS (TWO COVER SYSTEM)

Bid Invitation No : 808/Engg/TTDC/2017 Date: 21.08.2017

Contract Title : “Pilgrimage Rejuvenation and Spiritual Augmentation Drive” (PRASAD) for

Velankanni in Tamil Nadu.

Development of Velankanni

1. The Tamil Nadu Tourism Development Corporation Limited has received financial assistance from

Govt. of India (GOI) for implementation of “Pilgrimage Rejuvenation and Spiritual Augmentation

Drive” (PRASAD) for Velankanni in Tamil Nadu. The Part of this financial assistance from

Government of India will be utilized for eligible payments under the Contract named above.

2. For and on behalf of Tamil Nadu Tourism Development Corporation Limited, superscribed sealed

tenders under “Two bid” system namely “Technical bid” and “price bid” are invited from the

registered Civil Contractors with Public Works Department, Central Public Works Department or any

other State / Central Government Undertaking for the following works and the bidder should meet the

following requirement :-

Sl.

No Name of Work

Cost of

Tender

Document

Earnest

Money

Deposit

Period of

Contract

Eligibility / class of

Registration

1. Pilgrimage Rejuvenation and

Spiritual Augmentation Drive

(PRASAD) for Development of

Velankanni

Est. Amt. Rs.442.00 lakhs

Rs. 15,000/-

+ GST 18% Rs.4,00,000/- 18 months

Class I registration

with GST

(Refer Bid Document)

I. Velankanni Beach

Providing paver block road

II. Bus Stand

Construction of toilet block

III. Improvement of Oorani

Mariamman Kulam

a. Compound wall

b. Retaining wall

c. Pathway with handrails

d. Toilet

e. Lighting poles

f. Seating benches

IV. City Level Interventions

Street lighting

However, for complete eligibility and qualification requirements refer to Evaluation and Qualification

of the bidding document.

2 | P a g e

3. Eligibility criteria: Details furnished in Instruction to bidders of Volume I and for other conditions

refer bid document.

4. Interested Bidders may inspect the Bidding Document and obtain further information from the office

of The Chairman & Managing Director, Tamil Nadu Tourism Development Corporation Limited,

Tamil Nadu Tourism Complex, Wallajah Road, Chennai –600 002

5. A complete set of the Bidding Document in English language may be purchased by interested Bidders

on submission of a written application to “The Chairman & Managing Director, Tamil Nadu Tourism

Development Corporation Limited” address given above, on payment of a non-refundable document

fee of INR 15,000 (Rupees fifteen thousand only) plus 18% GST for the Contract package

separately, only in the form of Demand Draft (Indian Rupees only) during 10:00 hours to 17:00

hours on all working days starting from 21.08.17 to 20.09.17.

6. Further the Bidding Document may also be downloaded from the website www.tenders.tn.gov.in

and www.tamilnadutourism.org . The method of payment of document fee will be in the form of

Demand Draft in favour of “The Chairman & Managing Director, Tamil Nadu Tourism

Development Corporation Limited” payable at Chennai. In case the Bidding Document is

downloaded from the website, the document fee has to be paid along with the Bid as a separate

instrument other than that of Bid security.

7. Sealed Bids must be delivered at the address above on or before 21.09.17 (15:00 hours). Technical

bid must be accompanied by a Bid Security in requisite form for an amount as indicated in Bid data of

the bid document. The EMD / Bid Security shall be in the form of “Bank Guarantee‟ and “Fixed

Deposit Receipt‟. The Fixed Deposit Receipt Shall be drawn in favour of “The Chairman &

Managing Director, Tamil Nadu Tourism Development Corporation Limited”, payable at

Chennai.

8. Late bids shall be rejected. Technical Bids will be opened on the same day 21.09.17 (15:30 hours) in

the presence of the bidders or bidder’s representatives who choose to attend. In the event of the

specified date of bid submission/opening being declared a holiday for the Employer, the bids shall be

received and opened at the same time and place on the next working day

9. The Employer will not be responsible for any costs or expenses incurred by Bidders in connection

with the preparation or delivery of Bids.

10. The Employer reserves the right to accept or reject any bid, and to annul the bidding process and

reject all bids at any time prior to contract award, without thereby incurring any liability to Bidders.

11. Pre-bid meeting with the Bidders will be held at Office of The Chairman & Managing Director,

Tamil Nadu Tourism Development Corporation Limited, Tamilnadu Tourism complex, at No.2

Wallajah Road, Chennai –600 002 on 30.08.17 at 11:00 hours & 12:00 hours for this Contract

Package only. Bidders interested in participating in the pre bid meeting are advised to attend the

same.

12. Bidders are encouraged to visit the site, at their own cost, before the pre-bid meeting /submission of

bid. Bidders may visit the respective sites from 21.08.17 to 19.09.17 for this Package during 10:00

3 | P a g e

hours to 17:00 hours. A list of contact officers may be obtained from the office addresses given

above.

-S/d-

CHAIRMAN AND MANAGING DIRECTOR

Tamilnadu Tourism Development Corporation Ltd., Chennai 600 002 TAMILNADU

Tamil Nadu, India Phone No: 044-25367851-54

4 | P a g e

BIDDING DOCUMENT

For Procurement of the work of

Pilgrimage Rejuvenation& Spiritual Augmentation Drive” (PRASAD) for

Velankanni in Tamilnadu. Works comprising;

Providing Paver Block Road, Construction of Toilet Block, and

Providing Improvement works to MariammanKoil Kulam& Street

Lighting in Velankanni inNagapattinam District (Single Stage Two Cover System)

Volume 2- Price BID

Issued on :

Invitation for Bids No. :

Package No. :

Employer: The Chairman & Managing Director,

Tamil Nadu Tourism Development Corporation Limited,

Tamil Nadu Tourism Complex,

2, Wallajah Road,Chennai – 600 002,

Tamil Nadu

Telephone: +91- 44- 25333851-85Email:ttdc@vsnl.com,

5 | P a g e

Letter of Price Bid

Contract Package No. :

Invitation Bid No. : Date:

Title of contract :Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD)

for Velankanni in Tamilnadu. Providing Paver Block Road, Construction

of Toilet Block, and Providing Improvement works to Mariamman- Koil

Kulam & Street Lighting

To:

………………………………………………………………………………………………………………

………………………………………………………………………………………………………………

………………………………………………………………………………………………………………

We, the undersigned, declare that:

a) We have examined and have no reservations to the Bidding Documents, including Addenda

issued in accordance with Instructions to Bidders (ITB) 8;

b) We offer to execute in conformity with the Bidding Documents the following Works:

c) The total price of our Bid, excluding any discounts offered in item (d) below is:

d) The discounts offered and the methodology for their application is:

e) Our Bid shall be valid for a period of . . . . . days from the date fixed for the bid submission

deadline in accordance with the Bidding Documents, and it shall remain binding upon us and may

be accepted at any time before the expiration of that period;

f) If our Bid is accepted, we commit to obtain a performance security in accordance with the

Bidding Documents;

g) We have paid, or will pay the following commissions, gratuities, or fees with respect to the

bidding process or execution of the Contract: **

Name of Recipient Address Reason Amount

………………………………………………………………………………………………………………

………………………………………………………………………………………………………………

……………………………………………………………………………………………………………….

h) We understand that this bid, together with your written acceptance thereof included in your

notification of award, shall constitute a binding contract between us, until a formal contract is

prepared and executed; and

6 | P a g e

i) We understand that you are not bound to accept the lowest evaluated bid or any other bid that you

may receive.

j) We agree to permit Government of India or its representative to inspect our accounts and records

and other documents relating to the bid submission and to have them audited by auditors

appointed by GOI.

k) If awarded the contract, the person named below shall act as Contractor’s Representative.

Name ……………………………………………………………………………………………………….

In the capacity of ……………………………………………………………………………………………

Signed ………………………………………………………………………………………………………

Duly authorized to sign the Bid for and on behalf of ……………………………………………………….

Date …………………………………………………………………………………………………………

** If none has been paid or is to be paid, indicate “none”

7 | P a g e

Name of Work:-Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD) for Velankanni in

Tamilnadu Invitation of Bid No:

Contract Package No: Development of Velankanni under PRASAD Scheme (Pilgrimage Rejuvenation and Spiritual Augmentation Drive)

Name of Bidder &

Address

Schedule A

Sl.

No. Qty Description of Work

TNDSS

No

Rate in Rupees Unit in

Figure and

in words

Amount in

Rs. In

Figure

In Words

1 2909.00 Earth work excavation for foundation in all

soils and sub-soils and to full depth as may be

directed except in rock requiring blasting

inclusive of shoring shuttering, bailing out

water wherever necessary and depositing the

surplus earth within the compound in places

shown by the departmental officers with an

initial lead of 10 mts. and initial lift of 2 mts.

and clearing and levelling the site, etc.,

complete complying with standard

specification.

23 &

24

V, VI

S2

- 1M³(One

Cubic

Metre)

-

2 490.00 Refilling with excavated earth other than sand

with an initial head load of 100 mts. and

depositing the earth as shown by the

departmental officers in layers of not more

than 15 cm thick well rammed, watered and

consolidated etc. complete complying with

standard specification

24 &

25 V,

VI

S2

- 1M³(One

Cubic

Metre)

-

8 | P a g e

3 309.00 Supplying and filling in foundation, basement,

etc. with filling sand in layers of not more than

15 cm thick well watered, rammed and

consolidated etc. complete complying with

standard specification and as directed by the

departmental officers.

24 &

25 V,

VI

S2

- 1M³(One

Cubic

Metre)

-

4 1362.00 Supply delivery and filling of quarry rubbish in

layer of not more than 15cm thick including

watering with all layers and consolidation

complying with standard specifications

including cost and conveyance of all materials

and labour charges etc., complete

24 &

25 V,

VI

S2

- 1M³(One

Cubic

Metre)

-

5 258.00 Supply delivery and filling of gravel in layer of

not more than 15cm thick including watering

with all layers and consolidation complying

with standard specifications including cost and

conveyance of all materials and labour charges

etc., complete

37 B - 1M³(One

Cubic

Metre)

-

6 3415.00 Providing and laying of 80mm thick high

strength type conforming IS 15658-2006 of

rubberized interlocking paver block in required

sizes of minimum compressive strength of 40

N/mm2 in uniform shape of approved make to

be laid in flurrying bone pattern with approved

non-sticking surface in the top and the rate

including levelling the base preparation of sub

base with stone dust cushion 100mm thick,

laying out the pavement cut the pieces to fit the

edge, vibrating the pavers, sweeping

transporting, loading unloading and laying of

paver block as per standard specification.-10

Sq.m

SS - 1M² (One

Square

Metre)

-

9 | P a g e

7 710.00 Cement Concrete 1:4:8 (One part of cement,

four part of fine aggregate and eight part of

course aggregate) mix using 40mm HBG ISS

metal from approved quarry including cost and

conveyance of all materials to site and labour

charges, including dewatering if found

necessary and laid in layers of not more than

15cm thick and compacted etc., complete

complying with standard specifications as

directed by the departmental officers

28

V, VI

S2

(SS.A)

VII

- 1M³(One

Cubic

Metre)

-

8 0.00 Supplying and erecting cantering for sides and

soffits including necessary supports and

strutting upto 3.29 M height for plane surfaces

as detailed below in all floors with all cross

bracings using Mild Steel sheets of size 90 x 60

cm and 10 BG stiffened with welded Mild Steel

angle of size 25mm x 25mm x 3 mm for

boarding laid over silver oak joists of size 10cm

x 6.50 cm spaced at above 90 cm centre to

centre and supported by casurina props of 10cm

to 13 cm dia spaced at not more than 75 cm

centre to centre etc. complete complying with

the standard specification. (Payment for

cantering shall be given after the concrete is

laid)

30(S)

86 86

A V, VI

(S3)

VII

-

a) 888.00 Footing and Plinth - 1M² (One

Square

Metre)

-

b) 436.00 Cantering for soffits of RCC slabs - 1M² (One

Square

Metre)

-

10 | P a g e

c) 2842.00 For vertical Surfaces - 1M² (One

Square

Metre)

-

d) 310.00 Rate for RCC Square or rectangular column

and wall top & bottom slab of boxing sill slab

sunshade with necessary facia etc., complete

complying with standard specifications.

- 1M² (One

Square

Metre)

-

9 Providing and laying in position, Standardised

Concrete Mix M-25 Grade in accordance with

IS:456-2000, using 20mm and downgraded

hard broken granite stone jelly for all RCC

items of works with minimum cement content

of 350 kg/mᶾ and maximum water cement ratio

of 0.50, including admixture (plasticiser / super

plasticiser) in recommended proportions as per

IS:9103 to accelerate, retard setting of concrete,

improve workability without impairing strength

and durability with about (5.0 cu.m.) 7730 kg.

Of 20mm machine crushed stone jelly and with

about (3.3 cu.m.) 5156 kg. Of 10-12mm

machine crushed stone jelly and with about

(4.79 cu.m.) 7670 kg. of sand, but excluding

cost of reinforcement grill and fabricating

charges, cantering and shuttering and also

including laying, vibrating with mechanical

vibrators, finishing, curing, etc. and providing

fixtures like fan clamps in the RCC floor/ roof

slabs wherever necessary without claiming

extra, etc., complete complying with standard

specification and as directed by the

departmental officers. The coarse and fine

aggregates to be used should comply with the

requirements of IS Standards. (No separate

payment will be made by the Department for

30 -

11 | P a g e

the excess usage of materials).

a) 386.00 Foundation and Basement - 1M³

(One Cubic

Metre)

-

b) 69.00 For Ground Floor - 1M³

(One Cubic

Metre)

-

12 | P a g e

c) 1208.00 Add the basic rate for works above 1.50m depth

and upto 4.5m depth below ground level

- 1M³

(One Cubic

Metre)

-

c) 10.00 For First Floor - 1M³

(One Cubic

Metre)

-

10 1255.00 Supplying, fabricating and placing in position

Mild Steel / Ribbed Tor Steel grills for all RCC

works as per design given including cost of

steel and G.I. binding wire in all floors etc.

complete complying with standard

specification. (Contractor has to make his own

arrangements for the supply of steel and

binding wire)

SS 86

& 86 A

V, VI

(S3)

(S6)

VII

- 1Qtl

(One

Quintal)

-

11 Brick work in Cement Mortar 1:5 using best

quality of Second Class Ground Moulded

Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for

foundation and basement including curing, etc.,

complete complying with standard

specification.

31 -

a) 76.00 Up to Plinth Level - 1M³

(One Cubic

Metre)

-

b) 180.00 In Super Structure Ground Floor - 1M³

(One Cubic

Metre)

-

13 | P a g e

c) 70.00 Brick work in Cement Mortar 1:3 using best

quality of Second Class Ground Moulded

Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for

foundation and basement including curing, etc.,

complete complying with standard specification

in Partition Wall

- 1M² (One

Square

Metre)

-

12 1635.00 Plastering with Cement Mortar 1:5 (One

cement and Five sand), 12mm thick in all floors

including curing etc. complete complying with

standard specification and as directed by the

departmental officers.

61 V,

VI

(S4) 3

- 1M² (One

Square

Metre)

-

13 368.00 Special ceiling plastering and finishing the

exposed surface of all RCC items of work such

as slabs, beams, sunshades, facia, canopy slab,

staircase waist slab, landing slab etc., with

Cement Mortar 1:3 (One Cement and Three

Sand) 10mm thick including hacking the

surfaces, providing cement mortar nosing,

beading for sunshades, staircases, steps, landing

slabs and curing, etc., in all floors complying

with standard specification and as directed by

the departmental officers

56 &

57

- 1M² (One

Square

Metre)

-

14 35.00 Damp proof course with Cement Mortar 1:4

(One Cement and Four sand) 12mm thick

mixed with best approved quality water

proofing compound conforming to Indian

Standard specification as specified by the

departmental officers at 2% by weight of

cement used and finishing, curing etc. complete

complying with standard specification.

S38

(S6) &

V, VI

- 1M² (One

Square

Metre)

-

14 | P a g e

15 27.00 Weathering course in brick jelly lime concrete

using broken brick jelly of size 20mm uniform

gauge in pure slaked lime (no sand to be used)

to the proportion of brick jelly to lime being

32:12.5 by volume and laid over the RCC roof

slab in a single layer of required slope and

finished by beating the concrete with wooden

beaters of approved pattern, keeping the surface

constantly wet by sprinkling lime jaggery

water, etc., complete as per standard

specification and as directed by the

departmental officers.

51

(10-1)

V, VI

(S5)

VII, 3

- 1M² (One

Square

Metre)

-

16 219.00 Finishing the top of roof with one course of

machine pressed tiles of size 230mm x 230mm

x 20mm of approved quality set in Cement

Mortar 1:3 (One Cement and Three Sand)

12mm thick mixed with water proofing

compound conforming to ISS at 2% by weight

of cement used and the joints pointed neatly to

full depth of tiles with the same cement mortar

mixed with red oxide and water proofing

compound including curing etc., complete

complying with standard specification and as

directed by the departmental officers

44 H

V, VI

(S5A)

VII, 3

- 1M² (One

Square

Metre)

-

17 406.00 Dadooing walls with following best approved

quality, white / colour glazed tile of size

(300mm x 450mm x 6mm) set in Cement

Mortar 1:2 (One Cement and Two sand) 10mm

thick and pointing the joints with white cement

mixed with colouring pigments at the rate of

0.40 Kg. / sq.m. Neatly in all floors, curing,

etc., complying with standard specification and

as directed by the departmental officers.

39 A - 1M² (One

Square

Metre)

-

15 | P a g e

18 185.00 Paving the floor with pre-polished concrete

anti-skid step tiles (Required shape and design)

of 20mm thick of approved quality and colour

laid in Cement Mortar 1:3 (One Cement and

Three sand) 20mm thick and pointed with white

cement mixed with colouring pigment at the

rate of 0.40 Kg. / sq.m., curing, etc., complete

complying with standard specification and as

directed by the departmental officers. (The

make and brand of the tiles should be got

approved by Executive Engineer before use on

works)

39 A - 1M² (One

Square

Metre)

-

19 4.00 Flooring with following ceramic tiles of size

305 x 305 x 6 mm laid over 20 mm thick

cement mortar 1:3 (One Cement and Three

Sand) base mortar over the existing slab / floor

including cutting the tiles to the required size

with special cutter wherever necessary, laying

in position and pointing with white cement

mixed with colouring pigment at the rate of 0.3

Kg. / sq.m. etc., complete complying with

standard specification. (The make and brand of

the tiles should be got approved by Executive

Engineer before use on works)

39 A - 1M² (One

Square

Metre)

-

20 13.00 Paving the floor with best quality Vitrified

Tiles of size 600 x 600 x 8mm of approved

colour, shade and quality laid in cement mortar

1:3 (one cement and three sand) 20mm thick in

all floors and the top pointed with the white

cement mixed same colour pigments etc.,

complete complying with standard

specification. (The make and brand of the tiles

should be got approved by Executive Engineer

before use on works)

SS - 1M² (One

Square

Metre)

-

16 | P a g e

21 86.00 Providing and fixing of Decorative pressed

tiles of 12 mm thick of all sizes and shape of

approved quality and colour of approved make,

quality and colour with pointed neatly with

colour cement at the rate of 0.40kg/m2 laid

without any air gap in the tiles neatly and fixing

in position as per standard specifications and as

directed by the departmental officer. The

colour & quality of tiles should be got approved

by Municipal Engineer before use on work

44 H

V, VI

(S5A)

VII, 3

- 1M² (One

Square

Metre)

-

22 31.00 Providing and fixing of Solid PVC door

shutters using 19 Gauge 19mm MS square

tubes for styles and outer frames. 15mm

MS square tubes for top, lock and bottom

rails. The steel tubes shall be covered

with 5mm thick solid PVC sheets.

Shutter using 5mm thick solid PVCsheets for

panelling shall rigidly fixed in

position including necessary furnitureand

fittings. The overall size ofstyles shall

be50mm x 30mm. The overall size of top rail,

Lock rail and bottomrail shall be75mm x

30mm. The overall size of frames shall be

50mm x 45mm, with suitable rabate for

housing the shutter. a) Solid panel PVC door

with frame

74 - 1M² (One

Square

Metre)

-

17 | P a g e

23 9.00 Supplying, fabrication and fixing in position of

aluminium Powder Coating matt finish

ALUMINIUM DOUBLE LEAF DOOR of size

1.80m x 2.10m half glazed and half plb board

fully 12mm thick board fully 5.5mm thick

glazed door using rectangular aluminium box

section of following sizes of frames and

shutters with necessary accessories such as

rubber beading, aluminium clips, best double

action floor spring door closer, handle locks

and glass including all materials labour and

power consumption charges required for

fabrication if necessary chopping dismantling

making necessary holes in RCC columns,

beams or masonary wherever necessary with

power drill to the extent required and made

good to the original conditions after fixing etc.,

complete. The aluminium surface must be

anodised with matt finish under electrically

controlled condition in accordance with IS

specifications 1868/1962 of anodic film

thickness of not less than 15 microns for all

sections. All the materials should be got

approved by the Engineer in charge before

fixing as directed

81 A - 1M² (One

Square

Metre)

-

24 10.00 Supplying and erecting pull and push type

rolling shutter with ISI make of approved size

and section using 18 GI sheet. The shutter shall

be painted with one coat of red oxide primer

and the rate is inclusive of hood covers

transportation charges etc.,

84-A - 1M² (One

Square

Metre)

-

18 | P a g e

25 425.00 Supplying and painting the walls with two coats

of cement paint over one coat of cement primer

as instructed by the departmental officers

including preparation of surface curing, etc.,

complete in all floors complying with standard

specifications (The colour and shade of the

cement paint shall be got approved by the

Executive Engineer before use of work).

65-A - 1M² (One

Square

Metre)

-

26 1570.00 Painting two coats with Plastic Emulsion paint

of approved quality colour over new wall

surfaces including cleaning and preparing the

surface, scaffolding etc., complete.

SS - 1M² (One

Square

Metre)

-

27 11.00 Supplying and fixing 50mm thick (both side

polished) marble slabs for shelves (4 tier) with

neat finishing. The rate inclusive of cost of slab

and labour charges for fixing etc., complete as

directed by the departmental officer.

39-A - 1M² (One

Square

Metre)

-

19 | P a g e

28 11.00 Supplying and fixing in position Indian Water

Closet (Oriya type) of size 580 x 440mm colour

glazed earthen ware of approved quality and

brand with "P" or "S" trap conforming to BIS

with sand cushion and forming flooring alround

the closet using 40mm broken brick jelly in

lime concrete 1:2:5 (One lime, Two sand and

Five brick jelly) 100mm thick and finishing the

top to the required slope and including giving

necessary connection to CI soil pipes (including

the cost of 100mm dia CI pipe for a length of

600mm) by dismantling brick masonry wall /

reinforced cement concrete roof / floor slab and

making good the dismantled portion to the

original condition with leakages etc., complete

complying with standard specifications and as

directed by the departmental officers. (The

water closet should be got approved by the

Executive Engineer before use on works).

102-A - Each

-

29 6.00 Supplying and fixing in position white / colour

glazed European Water Closet of best quality

and approved make with 100 mm "P" or "S"

trap connecting with CI pipe of 100mm dia /

PVC pipe of 110mm dia, double flapped rigid

PVC black seat and seat cover with CP brass

hinges including cost of white cement, cement

for packing, spun yarn, teak wood plugs, brass

screws, etc., including supplying and fixing 10

litres capacity PVC / 12.5 litres capacity

porcelin low level flushing tank with a pair of

CI brackets, etc., complete with all fittings such

as 15mm brass ball valve with polythene float

with brass handle, union, coupling connected

by means of 40mm white PVC flush hand using

Indian adopter joint including all internal

102-A - Each

-

20 | P a g e

fittings.

30 16.00 Supply and fixing in position of best Indian

make white / colour glazed earthenware lipped

mouth flat back urinal of best quality and

approved make of size 430mm x 260mm x

350mm with GI pipe, 32mm dia bell mouth

PVC connection and waste pipe, 15mm dia GI

pipe of required length, 15mm dia GM wheel

valve, 15mm dia brass nipple 2 Nos., and fixing

the urinals in position with necessary TW

plugs, clamps, screws, etc., including

dismantling masnory and re-doing the same to

the original condition, etc., including painting

the pipe with two coats of best quality approved

synthetic enamel paint over one coat of red

oxide primer and checked without any leakage

etc. complete complying with standard

specifications and as directed by the

departmental officers. (The urinal should be

got approved by the Executive Engineer before

use on works.)

102-A - Each

-

21 | P a g e

31 9.00 Supplying and fixing in position best quality

and approved make Indian made white / colour

glazed earthenware wash hand basin of size 550

x 400mm (with pedestal / without pedestal)

with a pair of cast iron brackets, including cost

15mm dia brass CP pillar tap, 32mm dia "B"

class GI waste pipe with rubber plug and chain,

15mm dia GM wheel valve, 15mm brass

nipple, 15mm dia nylone connection, 32mm dia

CP brass waste coupling including fixing of

wash basin using CI brackets on to the wall in

position with TW plugs and screws, rubber

washers, white lead and giving necessary water

supply connection and painting the brackets

with two coat of painting over a priming coat of

anti-corrosive paint including testing for

leakages etc., complete complying with

standard specification and as directed by the

departmental officers. (The wash hand basin

and specials should be got approved by the

Executive Engineer before use on works).

102 - Each

-

32 25.00 Supplying and fixing in position 15mm dia

brass CP screw down tap / Pillar tap (heavy

duty) of approved make conforming to BIS

specifications and quality including cost of

shellac, thread, etc., complete complying with

standard specification and including cutting and

threading wherever necessary. (Taps should be

got approved by the Executive Engineer before

use on the works)

102-A - Each

-

22 | P a g e

33 4.00 Supplying and fixing in position Indian make

bevelled edge mirror of approved quality and

brand PVC / Fibre Glass framed 600 x 450 x

5.5mm thick mirror, shelf type with hard board

backing of approved colour fixed with brass

screws, rawl plug, etc., complete complying

with standard specification. (The mirror should

be got approved by the Executive Engineer

before use on woks)

102-A - Each

-

34 4.00 Supplying and fixing approved best quality

brass CP towel rail 600mm long and 20mm dia

with brackets of same materials including cost

of teak wood plugs and CP screws, etc.,

complete complying with standard

specifications. (The tower rail should be got

approved by Executive Engineer before use on

works).

102-A - Each

-

35 8.00 Supplying and fixing best approved best quality

brass CP soap tray of size 150 x 150mm

including cost of teak wood plugs, brass

screws, etc., complete complying with standard

specifications. (The soap tray should be got

approved by Executive Engineer before use on

works).

102-A - Each

-

36 20.00 Drilling of bore wells of size 4" (100 mm) to 5"

(125mm) dia in Sedimentary formation using

hand bore sets including insertion of casing

pipes and removal of casing pipes etc.,

including supplying and packing of pebbles and

conveyance of hand Bore set including loading

and unloading.

Drilling of 140/150 mm pilot bore

Upto 20 mt. Depth ending below ground level

26-A - 1 RM

(One

Running

Metre)

-

37 15.00 Providing and Fixing PVC CASING PIPE AS

PER IS 12818 / 2010 with Excise Duty 150 mm

dia CS

102-A - 1 RM

(One

Running

-

23 | P a g e

Metre)

38 1.00 Providing and fixing PVC SPECIALS AS PER

IS 10124/1982 Part-II 140 mm dia pipe end cap

102-A - Each

-

39 Providing and fixing HDPE PIPES - PE 100

AS PER IS 4984/1995 of the following dia with

necessary TW clamps, plugs, shoes, bends,

other lamps, screws nails etc., complete

complying with standard specifications. The

rate is inclusive of cost of removable iron

gratings of appropriate size. The size of Teak

wood plugs used is 150 x 25mm in front & 200

x 75mm in rear (wall side) with a depth of

110mm. The pipe is to be fixed by means of U

clamps at the centre of pipes to be fixed

102-A -

a) 120.00 For 110mm dia HDPE pipes - 1 RM

(One

Running

Metre)

-

b) 80.00 For 75mm dia HDPE pipes - 1 RM

(One

Running

Metre)

-

40 10.00 Supplying and fixing position CI Nahani Trap /

Floor Trap of the following sizes with best

stainless steel gratings of approved brand and

quality, fixed over a bed of brick jelly lime

concrete 1:2:5 (One part of lime, two part of

sand and five part of 40mm gauge brick jelly)

and finished with Cement Mortar 1:3 (One

102-A - Each

-

24 | P a g e

Cement, Three sand) including dismantling

masonry works wherever found necessary and

making good the dismantled portions to the

original condition and giving connection to the

CI / PVC pipes, etc., complete complying with

standard specification. (The Nahani Trap

should be got approved by the Executive

Engineer before use on works)

41 20.00 Supplying and fixing in position 150 x 100mm

"P" or "S" stoneware gully trap 'A' grade with

CI double gratings of size 150 x 150mm and

230 x 230mm at bottom and top respectively

with necessary earth work excavation laid over

a bed of brick jelly cement concrete 1:3:6 (One

cement, Three sand and Six broken brick jelly)

150mm thick using 40mm size broken brick

jelly including necessary brick work and

plastering including dismantling masonry

wherever necessary and re-doing the damaged

portions to the original conditions using cement

concrete 1:3:6 using 20mm stone jelly for

fixing the gully trap and giving connections to

stoneware sewer line etc., complete complying

with standard specifications. [Earth work

excavation, brick work, plastering shall be

measured and paid separately]. The stoneware

gully trap should be got approved by the

Executive Engineer before use on works.

102-A - Each

-

42 1.00 Supply and delivery of Single phase

Submersible Pump set as per IS 8034 1 HP

15X70 LPM including PVC INSULATED

AND SHEATHED 3 CORE FLAT TYPE

COPPER CABLE CONFORMING TO IS

694/1990 WITHOUT PANEL BOARD

including all charges etc. complete as per

standard specification.

98 - Each

-

25 | P a g e

43 1.00 Supply and delivery of Single phase Panel

Board 1HP with two level guard and auto start

including all charges etc. complete as per

standard specification.

98 - Each

-

44 1.00 Labour charges for the erection of submersible

pump set 5HP in bore well/open well including

fixing and jointing submersible cable with

proper clamps upto the starter to required depth

and also fixing of riser pipes to the required

depth valves erection clamps, pressure gauges

upto the exterior wall of pump room and

erection of panel board consisting of TPICN

switches starter, voltmeter, Ammeter, three

pilot (indicating) lamps capacitor single

phasing preventer, water level guard and laying

and jointing the cables and twin earthing as per

IE rules etc., complete and testing the pump set

and trail run for 10 days

98 - Each

-

45 85.00 Supply and run of 2 of 6 sqmm PVC insulated

SC unsheathed Cu. Conductor of 1100 V grade

on 7/20 GI bearer wire for SERVICE

CONNCETIONS MAINS.(SD-62)

102-A - 1 RM

(One

Running

Metre)

-

46 70.00 Supply and run of 2 of 1.5 Sq.mm PVC

insulated SC unsheathed Cu. Conductor of

1100 V grade on 7/20 GI bearer wire for

SERVICE CONNCETIONS MAINS.(SD-62)

102-A - 1 RM

(One

Running

Metre)

-

26 | P a g e

47 24.00 Wiring with 2 x 1.5 Sq.mm (22/0.3)PVC

insulated SC unsheated copper conductor cable

of 1100 V grade in suitable heavy gauge MS

conduit pipe concealed in wall and ceiling with

MS accessories with switch box with 5A FT

switch Two way in flush with sall and covered

with 3mm thick hylem sheet for MS switch box

with continuous earth wire connection of 14

SWG TC wire wire and making good of the

concealed portion with suitable colour for

concealed PVC FAN POINT (SD-3)

102-A - 1 RM

(One

Running

Metre)

-

48 525.00 Supply, laying and jointing of 2 core x 10

Sq.mm armouredaluminium UG CABLE from

meter board to EB pole to service connections

including cost and conveyance of all materials

and labour charges for laying and fixing the

cable etc., complete (SD-198)

SS - 1 RM

(One

Running

Metre)

-

49 17.00 Supply and fixing of 12 W / 18 W square type

latest model LED light with necessary

accessories fixing on Ceiling/ false ceiling with

PVC unsheathed Copper leads from terminals

to the fitting.

SS - Each

-

50 1.00 Supply and fixing of 32 Amps DPIC Switch of

500 V with metal clad with fuse and neutral

(Side Handle) on suitable TW Board , with

earth connection only SD 143

SS - Each

-

51 2.00 Supply and fixing of TNEB METER BOARD

suitable for 32A single phase service

connection with 32A fuse unit 500V 32 A

neutral link and earth link (1"x1/8" Copper flat)

on TW plank of size 375mm x 300mm x 19mm

with supporting TW reepers of 1" thick an

SS - Each

-

27 | P a g e

either side with painting with suitable bold and

nuts for fixing the TW plank on wall with earth

connection and inter connection with 7/20 PVC

insulated copper wire form EB meter to FUSE

ONLY (SD-125)

52 80.00 Providing Pathway hand rail using 304 Grade

16SWG SS pipe 40 mm Dia as verticals at high

spaced at 1 Meter centre with top railing 50 mm

Dia and 25 mm dia pipe intermediaterigidly

fixed with spacing of 0.30 mtr centre to centre

vertically in the existing concrete / brick wall

structure and properly fixed including all

materials and labour charges polishing

transport charges etc., complete

SS - 1 RM

(One

Running

Metre)

-

53 1380.00 Providing and fixing Kerb Slab of size 0.45

X0.125 X 0.30 Mtr

Supply and fixing of PCC precast kerb wall in

PCC 1:2:4 mix using 20mm gauge hard broken

granite stone jelly and river sand .Labour

charges for fixing the kerb wall in position

complying with standard specification as

directed by the departmental officers etc.,

complete

30 - 1 RM

(One

Running

Metre)

-

54 Supplying, laying and jointing of following

size of CPVC pipes of approved make and

ISI quality FINOLEX (OR) EQUIVALENT

(WITH lSI MONOGRAM) including fixing

CPVC specials but excluding cost of CPVC

specials, cutting, threading of pipes

concealing the pipes into wall with

necessary clamps and nails , dismantling the

wall, laying pipes and making good the

dismantled portion to original condition with

necessary brick work and plastering wherever

necessary etc. complete as directed by the

Corporation Officers.

SS -

28 | P a g e

a) 50.00 For 40 mm Dia CPVC Pipe -Working Pressure

10 kg/ sq.m

- 1 RM

(One

Running

Metre)

-

b) 30.00 For 25 mm Dia CPVC Pipe -Working Pressure

10 kg/ sq.m

- 1 RM

(One

Running

Metre)

-

c) 20.00 For 20 mm Dia CPVC Pipe -Working Pressure

10 kg/ sq.m

- 1 RM

(One

Running

Metre)

-

d) 50.00 For 15 mm Dia CPVC Pipe -Working Pressure

10 kg/ sq.m

- 1 RM

(One

Running

Metre)

-

55 Supplying and fixing in position first quality

and approved variety of Gun metal Gate Valve

/ Wheel Valve with BIS make of the following

dia including cost of shellac, thread balls, etc.,

complete complying with standard

specifications (for both internal and external

water supply arrangements). The valves to be

used on work shall be got approved by the

Executive Engineer before use on work.

102 A -

a) 15.00 20mm

- Each

-

b) 3.00 40mm

- Each

-

29 | P a g e

56 Supplying and fixing in position the following

CPVC, PVC& GI Specials of heavy type and

approved quality and good variety excluding

fixing charges but including necessary cutting

and threading of GI pipes, jointing the GI

specials and painting with two coats with good

variety and best quality synthetic enamel paint

over a coat of red oxide primer and jointing the

specials with pipe line using shellac etc.,

complete complying with standard

specification. (The GI specials should be got

approved by the Executive Engineer concerned

before use on works.)

102 A -

a) 20.00 25 mm Dia CPVC Elbow

- Each

-

b) 20.00 25 mm Dia CPVC Tee

- Each

-

c) 25.00 25 mm Dia CPVC coupling

- Each

-

e) 10.00 20mm Dia CPVC Elbow

- Each

-

e) 12.00 20mm dia CPVC Tee

- Each

-

f) 40.00 20 & 15mm dia CPVC elbow

- Each

-

30 | P a g e

g) 10.00 40mm dia GI Tee

- Each

-

h) 8.00 40mm dia GI Elbow

- Each

-

i) 4.00 40mm dia GI Union

- Each

-

j) 12.00 40mm dia GI Nipple

- Each

-

k) 15.00 40mm x 25mm dia GI Nipple

- Each

-

l) 5.00 40mm dia GI Coupling

- Each

-

m) 10.00 75mm dia PVC Plain elbow

- Each

-

n) 10.00 75mm dia PVC Door Elbow

- Each

-

o) 10.00 75mm dia PVC Door Tee

- Each

-

31 | P a g e

p) 10.00 75mm dia PVC Tee

- Each

-

q) 10.00 110mm dia PVC Door Tee

- Each

-

r) 5.00 110mm dia PVC Bend

- Each

-

s) 2.00 110mm dia PVC Cowl

- Each

-

t) 15.00 110mm dia PVC door Bend

- Each

-

u) 10.00 110mm dia PVC Tee

- Each

-

57 6.00 Supplying and fixing in position CI manhole

covers with CI frames (Heavy duty) of size

60cm x 60cm of best approved quality as per

standard specification etc., complete complying

with standard specifications

100 - Each

-

32 | P a g e

58 27.00 Exterior Façade;

Supplying, fabricating and fixing in position of

glazed designer tiles of dimension 450 X 450

mm and. structural the frame to be made with

45 mm X25 mmX 2 mm type angle aluminium

powder coated for support the cladding at equal

interval.. The rate including cost of all material

labour and conveyance to site etc. complete

SS - 1M² (One

Square

Metre)

-

59 1410.00 Supply, fabrication and fixing of Compound

Gate and Truss work with one coat of priming

coat including Cost and conveyance of all

materials and labour charges to site etc.

complete- Providing and fixing pre-fabricated

Double leaf compound gate with outer frame

120 X60 mm Box section with 16mm bright

square bars scroll of 16 X 8 mm flat with

aldrop tower – built , cover plate and bearing

including providing 450 mm height 300 mm

width motifs of M S plate 4 mm thick and

locking arrangement, pintals and hold fast

embedded in cement concrete 1:2:4 (1 cement:

2 coarse sand : 4 granitic or basaltic aggregate

20mm nominal size) including applying

priming coat with ready mixed red lead paint

and painting 2 or more coats with superior

ready mixed paint of approved brand and

manufacture in all shades as per direction of

Engineer including transportation and loading ,

unloading charges etc. complete.

84-A - 1 KG

(One

Kilograms)

-

33 | P a g e

60 35.00 Supply, fabrication & installation of Opaque

glass of cladding. The UPVC frame shall be

made out of extruded high impact resistant rigid

thermo vinyl polymers corresponding to DIN

53479 with excellent UV stabilization. The fire

property of the extruded section is

corresponding to DIN 52613. The Outer frame

shall dimensions of 96 x45 mm with wall

thickness of 1.5mm ± 0.3 mm with overall

process variation. The sliding shutter frame

shall be made 57 x 32 mm with wall thickness

of 2mm ± 0.3mm. The glazing beading shall be

made out of extruded section having overall

dimensions of 14 x 18.8 x 21 mm with wall

thickness of 1.3 mm ± 0.3 mm. The

interlocking system made out of extruded

section having overall dimensions of 35mm x

5mm shall be provided in between all shutters.

The interlocking section will be ultrasonically

welded on the shutter. EPDM weathering seals

and glazing seals shall be provided along with

necessary fittings.

SS - 1M² (One

Square

Metre)

-

61 21.00 Seating Benches

Providing and laying cast iron with handle

garden benches of approved design with

Wooden Strip Model RI B02 (Normal Size)

seat of length 5ft x2ft (1.5 X 0.60 Mtr) width

placed and fixed with necessary bolts and nuts

with painting the cast-iron parts and other

members and varnishing the battens etc. all

complete as per directions of engineer in-

charge. Including Transportation cost and

embossing logo on the benches etc. as

approved by Engineer- in - charge etc.

complete

SS - Each

-

34 | P a g e

62 55.00 Supplying and erecting LED square / circular

16 to 20W down lighter having pressure die-

cast aluminium housing, opal translucent cover,

mounting arrangement with board for surface

type or spring loaded mounting clips for flush

type complete.

SS - Each

-

63 81.00 Supply and fixing of 80 W LED Light,

complete with all accessories on the existing

bracket on street light poles; 1 amps 240 VAC

Lumen output = 95-100 Lumens/watt voltage:

100-277 VAC 50/60Hz., ColorTemperature:

white.5000-6500K.

• (Seoul Semiconductor brand / body material

Casing – Aluminium Die cast )

SS - Each

-

64 1.00 Supply and fixing of A.C Ceiling fan

complete 1200 mm (48") sweep with

300mm Down rod and Stepped electronic

300W / 450W square type fan

regulator (Anchor Deluxe / Equivalent) with

necessary accessories fixing on Ceiling/ false

ceiling with PVC unsheathed Copper leads

from terminals to the fitting. CONFORMING

TO ISS 374 / 1979

SS - Each

-

35 | P a g e

65 Supplying, fabrication and fixing in position of

StructuralGlazing DOOR and FACAD with

Toughened Glass 12mm t/g with cut-out

charges and Ozone Glass fittings with Silicon

paste with necessary accessories such as rubber

beading, aluminium clips, best double action

floor spring door closer, handle locks and glass

including all materials labour and power

consumption charges required for fabrication if

necessary chopping dismantling making

necessary holes in RCC columns, beams or

masonary wherever necessary with power drill

to the extent required and made good to the

original conditions after fixing etc., complete.

All the materials should be got approved by the

Engineer in charge before fixing as directed

SS -

a) 1.00 For Glass Door size 1.8 x 2.7 Mtr double Leaf

Door with Top Panel)( Refer Sketch No 1)

- Each

-

b) 1.00 For Fixed Glazing Partition 2 X 1.00 X 2.70

Mtrs ( Refer Sketch No8)

- Each

-

36 | P a g e

66 Paving the floor with Granite slabs (super fine

polished with machine cut edges) of approved

quality and colour of following sizes and 18

mm to 20 mm thick of approved make, quality

and colour in all floors over a base layer of

cement mortar 1:3(one cement three sand)

20mm thick and laid straight alignment and

pointed neatly with colour cement at the rate of

0.40kg/m2 laid without any air gap in the tiles

neatly and fixing in position as per standard

specifications and as directed by the

departmental officer. The colour & quality of

stone should be got approved by Municipal

Engineer before use on work

3 -

a) 35.00 For 50 mm/ 25 mm strip Rough Granite Dry

cladding at compound wall or similar places

- 1M² (One

Square

Metre)

-

67 4.00 Providing & erecting 3 m high (clear height)

precast decorative Heritage light pole with

Granite Appearance (3 Lined dressed granite

Pillar) of approved quality and colour of size

9" X9" of precast RCC pole concealment with

10 mm thick granite tile of approved make,

quality and colour with groove over a base

layer of cement mortar 1:3(one cement three

sand) 20mm thick and laid straight alignment

and pointed neatly with colour cement at the

rate of 0.40kg/m2 laid without any air gap in

the granite stone neatly and fixing in position

as per standard specifications complete with all

accessories, driver / power supply (if any),

connecting wire complete as required and

directed by the departmental officer. Supplier

must provide 5years warranty on the product.

The colour & quality of stone should be got

SS - Each

-

37 | P a g e

approved by Municipal Engineer before use on

work.

68 54.00 Providing and fixing Bitumen Felt 15 mm thick

pad For Expansion Joint.

- 1M² (One

Square

Metre)

-

Total Work Value

GST at 18%

Grand Total

Total Number of Items- 68 (Sixty Eight items

only)

-