talia - ares ill · 2019-06-10 · talia 209 65 50 30 170 60 180 correct fixing method correct...
TRANSCRIPT
205
LED VERSION: Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced
A++
A+
A
TALIA65
Talia
.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced
Protection againstimpact.IK 08 - 5,00 joule
Pre-wired with approx 200mm of cable
Bollard light
• Bollard light.• Configuration: extruded aluminium structure.
Polycarbonate diffuser: opal UV-stabilised. • Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: II• Installation: The LED module is housed in a sealed
transparent polycarbonate cylinder with compensation valve. The luminaire is equipped with a piece of cable and a wiring kit with crimp connectors and an adhesive heat-shrink tubing for a watertight electrical connection. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
• During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion.Chemical substances affect the anticorrosion covering protection.
206 Talia
120 35
360
180 60
120 35
360
180 60
C0 / C180 C90 / C270
cd / 1000 lm
450
60˚
90˚
120˚360
-1-2 10m
1
0
515
2545
Lux
2-1
C0 / C180 C90 / C270
cd / 1000 lm
60˚
90˚
120˚200
-1-2 10m
1
0
515
2545
Lux
2-1
65
65
503006White 3000K Lm LED 216 ≠ Lm OUTPUT 73
503008White 3000K Lm LED 2x216 ≠ lm OUTPUT 2x73
503011White 4000K Lm LED 216 ≠ Lm OUTPUT 73
503012White 4000K Lm LED 2x216 ≠ lm OUTPUT 2x73
@4000K
@4000K
Light Source: Low-Power LED / 3W / Total power 4W / CRI>80 / 220÷240V / Integral electronic power supply/
Light Source: Low-Power LED / 2x(3W) / Total power 7W / CRI>80 / 220÷240V / Integral electronic power supply
Talia - H. 360 mm - Single Emission
Talia - H. 360 mm - Double Emission
207Talia
120 35
560
180 60
120 35
560
180 60
C0 / C180 C90 / C270
cd / 1000 lm
450
60˚
90˚
120˚360
-1-2 10m
1
0
515
2535
Lux
2-1
C0 / C180 C90 / C270
cd / 1000 lm
450
60˚
90˚
120˚ 210
-1-2 10m
1
0
515
2535
Lux
2-1
65
65
503002White 3000K Lm LED 360 ≠ lm OUTPUT 123
503004White 3000K Lm LED 2x360 ≠ lm OUTPUT 2x123
503009White 4000K Lm LED 360 ≠ lm OUTPUT 123
503010White 4000K Lm LED 2x360 ≠ lm OUTPUT 2x123
@4000K
@4000K
Light Source: Low-Power LED / 5W / Total power 6W / CRI>80 / 220÷240V / Integral electronic power supply
Light Source: Low-Power LED / 2x(5W) / Total power 11W / CRI>80 / 220÷240V / Integral electronic power supply
Talia - H. 560 mm - Single Emission
Talia - H. 560 mm - Double Emission
208 Talia
209Talia
65
5030
170
60
180
Incorrect Fixing MethodCorrect Fixing Method Correct Fixing MethodBollard �xed on plinth + plug Bollard �xed on plinth + �xing bolts Do not �x the bollard directly on the ground
acc. code
prod. code 139 237
503002 • •503004 • •503006 • •503008 • •503009 • •503010 • •503011 • •503012 • •
Accessories: Talia
237SPD: (SURGE PROTECTION DEVICE) 275Vac MAXIMUM DISCHARGE CURRENT 10KA (8/20μs) MAXIMUM OPERATING CURRENT 5ASUITABLE FOR SERIES CONNEC-TION - IP66
139BASE PLATE AND FIXING BOLTS180 x 60 x H 170mm
Incorrect Fixing MethodDo not fix the bollard directly on the ground
Correct Fixing MethodBollard fixed on plint + suitable installation screws
Correct Fixing MethodBollard fixed on plinth + fixing bolts