taking care of your formulations - 2003
TRANSCRIPT
Exactly your chemistry.
Taking care of yourFormulations
Functional Chemicals Division
Cosmetic Raw MaterialsEdition 2003
> Pages
Foam Baths and Shower GelsA I, A XV > 05
Foam Baths > 06 – 07Bath Oils > 08Shower Gels > 08 – 11Shower Baths > 11 – 15
http:// fun.clariant.com
> 03
Contents
Taking care of your Formulations
Special Body Care AgentsA II > 17
Liquid Soaps > 18 – 19Wash Creams > 19Washing Lotions > 20 – 21Beauty Bar > 21
Skin Care PreparationsA VI > 23
Liquid Oil-in-Water Emulsions > 24 – 35
Liquid Water-in-Oil Emulsions > 36 – 37
Oil-in-Water Creams > 38 – 48Water-in-Oil Creams > 49 – 52Cream Gels > 53
> Pages
Hair Cleansing PreparationsB I > 55
Hair Shampoos > 56 – 59Care Shampoos > 59Baby Shampoos > 60Antidandruff Shampoos > 61 – 63Conditioning Shampoos > 64 – 65
Hair Care PreparationsB II, B III, B IV, B V > 67
Hair Aftertreatment Preparations > 68 – 75
Hair Tonics > 76Permanent Waves > 76Hair Styling Preparations > 76 – 77
Special Protection AgentsA VII, A II > 79
Antiperspirants > 80 – 81Foot Sprays > 82Hand Sanitizers > 82
This information is based on our present state ofknowledge and is intended to provide general noteson our products and their uses. It should not thereforebe construed as guaranteeing specific properties ofthe products described or their suitability for a parti-cular application. Any existing industrial propertyrights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
Printed in the Federal Republic of Germany
January 2003
http:// fun.clariant.com
> 05
Contents
Foam Baths and Shower Gels
Foam BathsFoam Bath A I / 1071 > 6clear, economical quality
Foam Bath A I / 2010 > 6with a pearl lustre effect
Foam Bath A I / 6006 > 6in tablet form
Creamy Foam Bath A I / 3026 > 7with a pearl lustre effect
Baby Bubble Bath A I / 4013 > 7clear
Bath OilsCreamy Bath Oil A XV / 1010 > 8clear, low viscosity
Shower GelsShower Gel A I / 8069 > 8clear
Shower Gel A I / 8072 > 8with a pearl lustre effect
Fitness Shower Gel AI/ 8077 > 9clear
Shower Gel A I / 8078 > 9with a pearl lustre effect
Shower Gel A I / 8083 > 10clear
Shower Gel A I / 8085 > 10with a pearl lustre effect
Shower Gel A I / 8091 > 11clear
Shower BathsShower Bath A I / 8070 > 11with a silk lustre effect
Clear Cream Body Wash A I / 8087 > 12Moisturizing Body Wash A I / 8088 > 13Silk Lustre Cream Body Wash A I / 8089 > 14
Care Shower Bath A I / 8092 > 15
> Pages> Pages
> 06
Foam
Bat
hs
Product name Recipe Procedure
Foam Baths and Shower Gels
http:// fun.clariant.com
Foam Baths and Shower Gels
Foam
Bat
hs
Product name Recipe Procedure
[A] Genapol® LRO liquid (Clariant) 60.00%Sodium Laureth Sulfate
[B] Medialan® LD (Clariant) 8.00%Sodium Lauroyl Sarcosinate
Fragrance 1.50%Cetiol® HE PEG-7 Glyceryl Cocoate 5.00%Genapol® PGL (Clariant) 5.00%Glycol Distearate (and) Cocamide MEA (and) PPG-4-Deceth-4
Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
Genapol® L-3 (Clariant) 1.00%Laureth-3
[C] Sodium Chloride 0.50%
[A] Allantoin (Clariant) Allantoin 0.10%[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 20.00%
Sodium Laureth Sulfate
Hostapon® KCG (Clariant) 18.00%Sodium Cocoyl Glutamate
Fragrance 0.50%Water ad 100.00%Bisabolol 2.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genapol® L-3 (Clariant) 2.75%Laureth-3
Genagen® CAB (Clariant) 10.00%Cocamidopropyl Betaine
[D] PEG-120 Methyl Glucose Dioleate 0.50%
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscosity with [C].
[1] Dissolve [A] in [B] while heating slightly.
[2] Stir the components of [C]one after another into [1].
[3] If necessary adjust the pH.
[4] Finally adjust the viscosity with [D].
Creamy Foam Bath A I / 3026with a pearl lustre effect,21.7% active ingredient
Baby Bubble Bath A I / 4013clear, 15.5% active ingredient
[A] Genapol® LRO liquid (Clariant) 25.00%Sodium Laureth Sulfate
[B] Hostapur® SAS 60 (Clariant) 5.00%Sodium C14 – 17 Sec Alkyl Sulfonate
Fragrance 0.50%Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Sodium Chloride 2.00%
[A] Genapol® LRO liquid (Clariant) 40.00%Sodium Laureth Sulfate
Hostapon® SCI-65 (Clariant) 5.00%Sodium Cocoyl Isethionate
[B] Water ad 100.00%[C] Fragrance 1.00%
Genapol® L-3 (Clariant) Laureth-3 1.00%Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
Genapol® PGL (Clariant) 4.00%Glycol Distearate (and) Cocamide MEA (and) PPG-4-Deceth-4
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[D] Sodium Chloride 0.80%
[A] Hostapon® TPHC (Clariant) 10.00%Sodium Methyl Oleyl Taurate
Sodium Bicarbonate 46.30%Tartaric Acid (powder) 32.00%Sodium Perborate 5.00%Polyglycol 4000 P (Clariant) 2.00%PEG-90
[B] Fragrance 3.00%Alcoholic dyestuff solution q.s.
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscosity with [C].
[1] Dissolve the components of[A] in [B] while stirring and heating to approx. 60°C.
[2] Cool down and add thecomponents of [C] at approx. 35°C while stirring.
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
[1] Mix the components of [A].
[2] Spray [B] over [1] and mix until homogeneous.
[3] Finally press in a tablet press.
Foam Bath A I / 1071clear, economical quality,10.0% active ingredient
Foam Bath A I / 2010with a pearl lustre effect,17.5% active ingredient
Foam Bath A I / 6006in tablet form, high bubbling,with oxygen emission, 6.4% active ingredient
> 07
Bath
Oils
Show
er G
els
Product name Recipe Procedure
Foam Baths and Shower Gels
> 08
http:// fun.clariant.com
> 09
Foam Baths and Shower Gels
Show
er G
els
Product name Recipe Procedure
[A] Hostaphat® KL 340 D (Clariant) 2.00%Trilaureth-4 Phosphate
Emulsogen® LP (Clariant) Oleth-5 2.00%Mineral Oil, high viscosity 53.00%Soja Oil 10.00%Isopropyl Palmitate 30.00%Fragrance 3.00%Dyestuff solution q.s.
[A] Genapol® LRO liquid (Clariant) 35.00%Sodium Laureth Sulfate
[B] Genapol® SBE (Clariant) 8.00%Disodium Laureth Sulfosuccinate
Fragrance 0.50%Water ad 100.00%Genapol® L-3 (Clariant) Laureth-3 3.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Sodium Chloride 1.50%
[A] Genapol® LRO liquid (Clariant) 40.00%Sodium Laureth Sulfate
[B] Hostapon® KCG (Clariant) 6.00%Sodium Cocoyl Glutamate
Fragrance 1.00%Genapol® L-3 (Clariant) Laureth-3 1.50%Cetiol® HE PEG-7 Glyceryl Cocoate 5.00%Genapol® PGL (Clariant) 4.00%Glycol Distearate (and) Cocamide MEA(and) PPG-4-Deceth-4
Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB 818 (Clariant) 6.00%Cocamidopropyl Betaine
[C] Sodium Chloride 2.30%
[1] All of the components aremixed in any sequence atroom temperature.
[1] One after another the components of [B] are added to [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscositywith [C].
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscositywith [C].
Creamy Bath Oil A XV / 1010clear, low viscosity
Shower Gel A I / 8069clear, 13.9% active ingredient
Shower Gel A I / 8072with a pearl lustre effect,16.2% active ingredient
[A] Menthol 0.20%Camphor 0.10%Rosemary Oil 0.30%Genapol® L-3 (Clariant) 2.00%Laureth-3
[B] Propylene Glycol 2.00%[C] Genapol® LRO liquid (Clariant) 45.00%
Sodium Laureth Sulfate
Genapol® AMS (Clariant) 4.00%TEA-PEG-3 Cocamide Sulfate
Water ad 100%Horse chestnut extract 0.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[D] Sodium Chloride 2.80%
[A] Hostapon® CT paste (Clariant) 6.00%Sodium Methyl Cocoyl Taurate
Hostapon® SCI-65 (Clariant) 2.70%Sodium Cocoyl Isethionate
[B] Water ad 100%[C] Genapol® LRO liquid (Clariant) 40.00%
Sodium Laureth Sulfate
Genapol® PGM (Clariant) 6.00%Sodium Laureth Sulfate (and) Glycol Distearate(and) Cocamide MEA
Fragrance 0.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genapol® L-3 (Clariant) 3.00%Laureth-3
[D] Sodium Chloride 0.40%
[1] Dissolve [A] in [B].
[2] Stir the components of [C]one after another into [1].
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
[1] Dissolve the components of[A] in [B] while stirring andheating to approx. 60°C.
[2] Cool down and add thecomponents of [C] one afteranother into [1] at approx.35°C while stirring.
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
Fitness Shower Gel A I / 8077clear, 16.2% active ingredient
Shower Gel A I / 8078with a pearl lustre effect,19.8% active ingredient
> 10
Show
er G
els
Product name Recipe Procedure
Foam Baths and Shower Gels
http:// fun.clariant.com
> 11
Foam Baths and Shower Gels
Show
er B
aths
Show
er G
els
Product name Recipe Procedure
[A] Genapol® LRO liquid (Clariant) 48.10%Sodium Laureth Sulfate
Fragrance 0.50%[B] Water ad 100.00%
Genagen® CAB 818 (Clariant) 6.70%Cocamidopropyl Betaine
Bozequat® 4000 (Clariant) 0.70%Polyquaternium-43
Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Dyestuff solution q.s.[D] Sodium Chloride 2.10%
[A] Genapol® LRO liquid (Clariant) 30.00%Sodium Laureth Sulfate
Hostapon® SCI-85 (Clariant) 5.00%Sodium Cocoyl Isethionate
[B] Water ad 100.00%[C] Fragrance 0.30%
Genapol® TSM (Clariant) 4.00%PEG-3 Distearate (and) Sodium Laureth Sulfate
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
[D] Sodium Chloride 1.40%
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Add the components of [C] to [2]
[4] Finally adjust the viscositywith [D].
[1] Dissolve the componentsof [A] in [B] while stirring andheating to approx. 60°C.
[2] Cool down and add thecomponents of [C] at approx. 35°C while stirring.
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
Shower Gel A I / 8091clear,with Bozequat 4000,15.0% active ingredient
Shower Bath A I / 8070with a silk lustre effect
[A] Genapol® LRO liquid (Clariant) 40.00%Sodium Laureth Sulfate
[B] Hostapon® CCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Fragrance 0.50%PEG-7 Glyceryl Cocoate 2.00%
[C] Allantoin (Clariant) Allantoin 0.40%[D] Water ad 100.00%[E] Genagen® CAB (Clariant) 6.00%
Cocamidopropyl Betaine
Genapol® L-3 (Clariant) Laureth-3 1.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Citric Acid (50% in water) 0.55%[F] Sodium Chloride 1.20%
[A] Allantoin (Clariant) Allantoin 0.40%[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 30.00%
Sodium Laureth Sulfate
Cetiol® HE 2.00%PEG-7 Glyceryl Cocoate
Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Fragrance 0.50%[D] Genagen® CAB (Clariant) 6.00%
Cocamidopropyl Betaine
Genapol® L-3 (Clariant) Laureth-3 2.00%Genapol® PDB (Clariant) 4.00%Glycol Distearate (and) Laureth-4 (and)Cocamidopropyl Betaine
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[E] Sodium Chloride 1.20%
[1] One after another the components of [B] are added to [A].
[2] Dissolve [C] in warmed [D].
[3] Stir [2] into [1].
[4] One after another the components of [E] are added to [3].
[5] If necessary adjust the pH.
[6] Finally adjust the viscositywith [F].
[1] Dissolve [A] in [B], while heating to approx. 60°C.
[2] Cool [1] down to approx. 35°Cand add to [C].
[3] One after another the components of [D] are added to [2].
[4] If necessary adjust the pH.
[5] Finally adjust the viscositywith [E].
Shower Gel A I / 8083clear
Shower Gel A I / 8085with a pearl lustre effect,16.8% active ingredient
> 12
Show
er B
aths
Product name Recipe Procedure
Foam Baths and Shower Gels
http:// fun.clariant.com
> 13
Foam Baths and Shower Gels
Show
er B
aths
Product name Recipe Procedure
[A] Glucamate® DOE-120 2.25%PEG-120 Methyl Glucose Dioleate
UCARE® Polymer JR 400 0.30%Polyquaternium-10
Edenor® K 12-18 2.00%Coconut Fatty Acid
Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 39.00%
Sodium Laureth Sulfate
Genagen® CAB (Clariant) 21.10%Cocamidopropyl Betaine
Hostapon® CLG (Clariant) 2.80%Sodium Lauroyl Glutamate
Glycerin 2.00%[D] Fragrance 0.50%
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Stir the components of [A] into [B] at approx. 80°C.
[2] Mix together the componentsof [C] and heat to approx. 80°C.
[3] Add [1] into [2] and stir until cool.
[4] If necessary adjust the pH.
[5] Add [D] to [3].
Moisturizing Body Wash A I / 8088
mild Cream Body Wash, Cleanserplus Moisturizer
Aristoflex® PEA helps to improveyour skin’s condition and keepsyour skin feeling soft and smooth
especially mild formulation with Genagen® CAB andHostapon® CLG
[A] Glucamate® DOE-120 2.25%PEG-120 Methyl Glucose Dioleate
UCARE® Polymer JR 400 0.30%Polyquaternium-10
Edenor® K 12-18 2.00%Coconut Fatty Acid
Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 37.00%
Sodium Laureth Sulfate
Genagen® CAB (Clariant) 3.10%Cocamidopropyl Betaine
Hostapur® SAS 30 (Clariant) 2.00%Sodium C14 – 17 Alkyl Sec Sulfonate
Genagen® LDA (Clariant) 10.20%Sodium Lauroamphoacetate
Hostapon® CLG (Clariant) 9.40%Sodium Lauroyl Glutamate
Glycerin 2.00%[D] Citric Acid (25%) 2.20%[E] Urea 0.50%
Fragrance 0.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Stir the components of [A] into [B] at approx. 80°C.
[2] Mix together the componentsof [C] and heat to approx. 80°C.
[3] Add [1] into [2] and stir until cool.
[4] Adjust the pH with [D] to pH > 6,3.
[5] Add [E] to [4].
Clear Cream Body Wash A I / 8087all day Cleanser plus Moisturizer,formulated with Aristoflex® PEA to keep your skin feeling soft and smooth
provides silky skin feel and creamy lather
mild formulation with Genagen® LDA and Hostapon® CLG
> 14
Show
er B
aths
Product name Recipe Procedure
Foam Baths and Shower Gels
http:// fun.clariant.com
> 15
Foam Baths and Shower Gels
Show
er B
aths
Product name Recipe Procedure
[A] Genapol® LRO liquid (Clariant) 30.00%Sodium Laureth Sulfate
Hostapon® SCI-85 (Clariant) 5.00%Sodium Cocoyl Isethionate
[B] Water ad 100.00%[C] Glucamate® DOE 120 2.50%
PEG-120 Methyl Glucose Dioleate
[D] Cetiol® HE 2.00%PEG-7 Glyceryl Cocoate
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
Glycerin 2.0%Dyestuff solution q.s.Fragrance 0.50%Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Add the components of [A]into [B]. Stir until clear whileheating to approx. 65°C.
[2] Dissolve [C] in still warmed [1].
[3] Add the components of [D] one after another into [2].
[4] If necessary adjust the pH.
Care Shower bath A I / 8092clear, 14% active ingredient
[A] Glucamate® DOE-120 2.25%PEG-120 Methyl Glucose Dioleate
UCARE® Polymer JR 400 0.30%Polyquaternium-10
Edenor® K 12-18 2.00%Coconut Fatty Acid
Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
Genapol® TS Powder (Clariant) 2.00%PEG-3 Distearate
[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 37.00%
Sodium Laureth Sulfate
Genagen® CAB (Clariant) 3.10%Cocamidopropyl Betaine
Hostapur® SAS 30 (Clariant) 2.00%Sodium C14 – 17 Alkyl Sec Sulfonate
Genagen® LDA (Clariant) 10.20%Sodium Lauroamphoacetate
Hostapon® CLG (Clariant) 9.40%Sodium Lauroyl Glutamate
Glycerin 2.00%[D] Citric Acid (25%) 2.20%[E] Urea 0.50%
Fragrance 0.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Stir the components of [A] into [B] at approx. 80°C.
[2] Mix together the componentsof [C] and heat to approx. 80°C.
[3] Add [1] into [2] and stir until cool.
[4] Adjust the pH with [D].
[5] Add [E] to [3].
Silk Lustre Cream Body WashA I / 8089
all day Cleanser plus Moisturizer,formulated with Aristoflex® PEA to keep your skin feeling soft and smooth
provides silky skin feeling andcreamy lather
especially mild formulationwith Genagen® LDA andHostapon® CLG
http:// fun.clariant.com
> 17
Contents
Special Body Care Agents
Liquid SoapsLiquid Soap A II / 1023 > 18Liquid Soap A II / 1027 > 18clear
Liquid Soap A II / 1034 > 19with a pearl lustre effect
Wash CreamsWash Cream A II / 2001 > 19Facial Wash Cream A II / 2002 > 19
Washing LotionsWashing Lotion A II / 4021 > 20clear
Body wash A II / 4022 > 20mild
Washing Lotion A II / 4024 > 21clear, with a bacteriostatic effect
Beauty BarClear Beauty Bar A II / 5009 > 21
> Pages
http:// fun.clariant.com
> 19
Special Body Care Agents
Was
h Cr
eam
s
Product name Recipe Procedure
Liqu
id S
oaps
Product name Recipe Procedure
Special Body Care Agents
> 18
[A] Hostaphat® CS 120 (Clariant) 1.00%Stearyl Phosphate
Stearic Acid 4.00%Cetyl Alcohol 4.00%
[B] Hostapon® SCI-65 (Clariant) 25.00%Sodium Cocoyl Isethionate
Hostapon® CCG (Clariant) 10.00%Sodium Cocoyl Glutamate
Zinc Chloride 0.40%[C] Water ad 100.00%[D] Fragrance 0.30%
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[A] Hostapon® SCI-65 (Clariant) 25.00%Sodium Cocoyl Isethionate
Genagen® LAA (Clariant) 10.00%Sodium Lauroamphoacetate
Stearic Acid 4.00%Starch 5.00%Water ad 100.00%
[B] Fragrance 0.30%Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Melt [A] in a vacuum kettle with a stirrer at approx. 60°C.
[2] Dissolve [B] in [C] at 70°C.
[3] Add [D] to [2].
[4] Stir [2] into [1] and continuestirring under vacuumuntil cool.
[1] Melt [A] at about 80 – 90°C.
[2] Stir until cool (minimum 1h).
[3] At about 35°C add thecomponents of [B] to [2].
Wash Cream A II / 2001
Facial Wash Cream A II / 2002
[A] Genapol® LRO liquid (Clariant) 48.00%Sodium Laureth Sulfate
Hostapur® SAS 30 (Clariant) 8.00%Sodium C14 – 17 Sec Alkyl Sulfonate
Fragrance 0.30%Water ad 100.00%Genapol® PGM (Clariant) 4.00%Sodium Laureth Sulfate (and) Glycol Distearate (and) Cocamide MEA
Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genapol® L-3 (Clariant) 3.00%Laureth-3
[B] Sodium Chloride 1.50%
[A] Genapol® LRO liquid (Clariant) 35.00%Sodium Laureth Sulfate
[B] Fragrance 0.20%Cetiol® HE 1.00%PEG-7 Glyceryl Cocoate
Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genapol® L-3 (Clariant) 2.00%Laureth-3
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
[C] Sodium Chloride 0.50%
[1] Mix the components of [A].
[2] If necessary adjust the pH,then adjust the viscositywith [B].
[1] One after another thecomponents of [B] areadded to [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscositywith [C].
Liquid Soap A II / 1023with a pearl lustre effect, 13.6% active ingredient
Liquid Soap A II / 1027clear, 11.2% active ingredient
[A] Tylose® H 10000 G4 (Clariant) 1.00%Hydroxyethylcellulose
[B] Water ad 100.00%[C] Hostapon® SCI-65 (Clariant) 12.00%
Sodium Cocoyl Isethionate
Hostapon® KCG (Clariant) 6.00%Sodium Cocoyl Glutamate
Water 40.70%[D] Fragrance 0.30%
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Dissolve [A] under stirring in [B].
[2] Dissolve the components of [C] at 60°C, stir into [1], cool down to 30°C.
[3] Add the components of [D] to [1].
[4] If necessary adjust the pH.
Liquid Soap A II / 1034with a pearl lustre effect,12.3% active ingredient
Liqu
id S
oaps
> 20
http:// fun.clariant.com
> 21
Special Body Care Agents
Beau
ty B
ar
Product name Recipe Procedure
Was
hing
Lot
ions
Was
hing
Lot
ions
Product name Recipe Procedure
Special Body Care Agents
[A] Hostapon® CCG (Clariant) 30.00%Sodium Cocoyl Glutamate
Water ad 100.00%[B] Glucamate® DOE 120 2.50%
PEG-120 Methyl Glucose Dioleate
[C] Genagen® CAB (Clariant) 10.00%Cocamidopropyl Betaine
Genapol® PDB (Clariant) 3.00%Glycol Distearate (and) Laureth-4 (and)Cocamidopropyl Betaine
Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[D] Citric Acid (50% solution in water) 3.30%[E] Sodium Chloride 0.60%
[1] Dissolve [B] in [A] while stirring and heating slightly.
[2] Add one after another thecomponents of [C] into [1].
[3] Adjust the pH with [D].
[4] Finally adjust the viscositywith [E].
Body Wash A II / 4022mild, with 12% active ingredient
[A] Octopirox® (Clariant) 0.20%Piroctone Olamine
[B] Water 10.00%[C] Genapol® AMS (Clariant) 19.00%
TEA-PEG-3 Cocamide Sulfate
Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[D] Allantoin (Clariant) Allantoin 0.20%[E] Water ad 100.00%[F] Genapol® L-3 (Clariant) Laureth-3 0.50%
Genagen® CAB (Clariant) 8.00%Cocamidopropyl Betaine
[G] Glucamate® DOE 120 0.20%PEG-120 Methyl Glucose Dioleate
[1] Mix [A] with [B].
[2] Add [C] to [1] and keep stirring until a clear solution has been obtained.
[3] Dissolve [D] in [E] whileheating slightly.
[4] Add [3] to [1].
[5] Add the components of [F].
[6] If necessary adjust the pH.
[7] Adjust the viscosity with [G].
Washing Lotion A II / 4024clear, 10.4% active ingredient
[A] Propylene Glycol 18.00%Sorbitol (70%) 12.00%Genapol® LRO paste (Clariant) 17.80%Sodium Laureth Sulfate
Alcohol denat. 2.00%Tocopheryl Acetate 0.10%Jojoba Oil 0.25%Panthenol 0.10%Glycerin 12.00%Water ad 100.00%Stearic Acid 13.00%Myristic Acid 6.00%
[B] Sodium Hydroxide 6.00%(50% aqueous solution)
[C] Tetrasodium EDTA 0.40%Hostapon® SCI-85 Powder (Clariant) 5.00%Sodium Cocoyl Isethionate
Sandopan LS-24 N (Clariant) 3.50%Sodium Laureth-13-Carboxylate
[D] Dyestuff solution q.s.Fragrance q.s.
[1] Mix all Components of [A], heat to 59 – 62°C.
[2] Add [B] dropwise to maintaintemperature below 70°C.
[3] Stir mixture for 1 hour.
[4] Add [C] one at a time, allowing to stir 5 minutes between additions.
[5] Add [D] and pour into molds.
[6] Allow to cool; remove from molds and wrap.
Clear Beauty Bar A II / 5009
[A] Hostapon® KCG (Clariant) 30.00%Sodium Cocoyl Glutamate
[B] Fragrance 0.30%[C] Water ad 100%
Glucamate® DOE 120 3.00%PEG-120 Methyl Glucose Dioleate
Sodium Chloride 1.50%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB (Clariant) 10.00%Cocamidopropyl Betaine
[1] Dissolve [B] in [A].
[2] Add one after another thecomponents of [C] to [1].
[3] If necessary adjust the pH.
Washing Lotion A II / 4021clear, 10.5% active ingredient
http:// fun.clariant.com
> 23
Contents
Skin Care Preparations
Liquid Oil-in-Water EmulsionsO/W-Skin Milk A VI / 1001 > 24O/W-Skin Milk A VI / 1111 > 25with co-emulsifier leading to high stability
O/W-Skin Milk A VI / 1119 > 25manufacturing at room temperature
O/W-Skin Milk A VI / 1257 > 26cold processing, no ethoxylated substances
O/W-Skin Milk A VI / 1465 > 26cold processing
O/W-Skin Milk A VI / 1467 > 27O/W-Skin Milk A VI / 1468 > 27O/W-Skin Milk A VI / 1469 > 28O/W-After Sun Milk A VI / 3016 > 28
O/W-Sun Screen Milk A VI / 7003 > 29
O/W-Sun Screen MilkA VI / 7403 > 30no ethoxylated substances
O/W-Sun Protection Milk A VI / 7405 > 31
O/W-Sprayable Sun Protection A VI / 7407 > 32
O/W-Sun Screen Milk A VI / 7408 > 32
O/W-Sun Milk A VI / 7409 > 33O/W-Sun Screen A VI / 7417 > 33O/W-Skin Milk A VI / 8100 > 34O/W-Skin Milk A VI / 8706 > 34Après Spray A VI / 9001 > 35Basic Sprayable Emulsion A VI / 9003 > 35
> Pages > Pages > Pages
Liquid Water-in-Oil EmulsionsW/O-Skin Milk A VI / 2202 > 36W/O-Skin Milk A VI / 2300 > 36W/O-Skin Milk A VI / 3300 > 37W/O-Sun Protection Milk A VI / 7300 > 37
Water-in-Oil CreamsW/O-Cream A VI / 2713 > 49W/O-Cream A VI / 2807 > 50W/O-Cream A VI / 2808 > 50W/O-Baby Cream A VI / 5802 > 51W/O-Baby Cream A VI / 5804 > 52soft
W/O-Baby Cream A VI / 5805 > 52no ethoxylated substances
Cream GelsMoisturizing Cream Gel A VI / 8708 > 53
Moisturizing Cream Gel A VI / 8718 > 53
Oil-in-Water CreamsO/W-Sun Protection Milk A VI / 7404 > 46
O/W-Tanning Cream A VI / 8505 > 47
O/W-Cream A VI / 8608 > 47O/W-Facial Mask A VI / 8707 > 48
Oil-in-Water CreamsO/W-Cream A VI / 1503 > 38no ethoxylated substances
O/W-Cream A VI / 1852 > 38O/W-Night Cream A VI / 1711 > 39heavy
O/W-Cream A VI / 1951 > 39cold processing
O/W-Cream A VI / 1952 > 40no ethoxylated substances
O/W-Cream A VI / 1954 > 40no ethoxylated substances
O/W-Cream A VI / 1956 > 41no ethoxylated substances
O/W-Soft Cream A VI / 1957 > 41O/W-Cream A VI / 1960 > 42O/W-Cream A VI / 1975 > 42cold processed
O/W-Day Cream A VI / 1973 > 43with UVA and UVB protection
Hand Protection Cream A VI / 6600 > 44
Depilatory Cream A VI / 8703 > 44O/W-Sun Blocker Cream A VI / 7401 > 45no ethoxylated substances
> 24
http:// fun.clariant.com
> 25
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[A] Hostaphat® CS 120 (Clariant) 1.00%Stearyl Phosphate
Tegin® M 1.00%Glyceryl Stearate
Stearic Acid 1.00%Cetyl Alcohol 0.50%Abil® 100 1.00%Dimethicone
Mineral Oil, low viscosity 4.00%Cetiol® V 4.00%Decyl Oleate
Isopropyl Isostearate 3.00%Tocopheryl Acetate 0.50%
[B] Carbopol® 980 0.20%Carbomer
[C] Hostapon® CCG (Clariant) 0.60%Sodium Cocoyl Glutamate
Allantoin (Clariant) 0.20%Allantoin
Extrapon® Chamomile special 0.50%Bisabolol
Sorbitol 4.00%Glycerin 5.00%Sodium Hydroxide (10% in water) 1.80%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
Water ad 100.00%[D] Fragrance 0.30%
[1] Melt [A] at 80°C,then add [B].
[2] Heat [C] to 80°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] Add [D] to [4] at 35°C.
[6] Finally homogenizethe emulsion.
O/W-Skin Milk A VI / 1001no ethoxylated substances,with dimethicone
[A] Hostaphat® KL 340 D (Clariant) 1.00%Trilaureth-4 Phosphate
Hostacerin® DGSB (Clariant) 3.00%PEG-4 Polyglyceryl-2 Stearate
Wheat Germ Oil 2.00%Soybean Oil 5.00%Isopropyl Palmitate 3.00%
[B] Carbopol® 980 0.60%Carbomer
[C] Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Sodium Hydroxide solution 2.40%(10% in water)
Glycerin 3.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Hostaphat® KL 340 D (Clariant) 0.75%Trilaureth-4 Phosphate
Hostacerin® DGI (Clariant) 1.00%Polyglyceryl-2 Sesquiisostearate
Mineral Oil, low viscosity 8.00%Isopropyl Palmitate 6.00%Cetiol® 868 5.00%Octyl Stearate
[B] Carbopol® 980 0.40%Carbomer
[C] Water ad 100.00%Sodium Hydroxide solution 1.60%(10% in water)
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 60°C, then add [B].
[2] Heat [C] to 60°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At 35°C add [D] to [4].
[6] Finally homogenizethe emulsion.
[1] Mix [A] and [B].
[2] Stir [C] into [1], then add [D].
[3] Finally homogenize theemulsion.
O/W-Skin Milk A VI / 1111with co-emulsifier leading to highstability
O/W-Skin Milk A VI / 1119manufacturing at roomtemperature, W/O-emulsifier Hostacerin® DGIas co-emulsifier
> 26
http:// fun.clariant.com
> 27
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[A] Hostaphat® KL 340 D (Clariant) 0.50%Trilaureth-4 Phosphate
Mineral Oil, high viscosity 4.50%[B] Aristoflex® AVC (Clariant) 0.80%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%[D] Fragrance 0.30%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Aristoflex® PEA (Clariant) 1.50%Polypropylene Terephthalate
Hostacerin® DGL (Clariant) 1.50%PEG-10 Polyglyceryl-2-Laurate
Isopropyl Palmitate 4.00%Almond Oil 5.00%Cetiol® SN 8.00%Cetaryl Isononanoate
Cetyl Alcohol 1.20%[B] Aristoflex® AVC (Clariant) 1.00%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Mix [A] and [B].
[2] Stir [C] into [1], then add [D].
[3] Finally homogenize theemulsion.
[1] Melt [A] at approx. 60°C,then add [B].
[2] Add [C] and stir well.
[3] At approx. 35°C add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Skin Milk A VI / 1467very low amount of emulsifier,manufacturing at roomtemperature;economic formulation
O/W-Skin Milk A VI / 1468formulated with polymericemulsifier Aristoflex® PEA
excellent spreadability and fastabsorption, provides dryaesthetic feel without tackiness
light O/W milk suitable aselegant after sun formulationwith cooling effect
[A] Hostacerin® DGI (Clariant) 2.00%Polyglyceryl-2 Sesquiisostearate
Cetiol® 868 Octyl Stearate 5.00%Almond Oil 8.00%Avocado Oil 5.00%
[B] Carbopol® 980 Carbomer 0.30%[C] Hostacpon® KCG (Clariant) 0.60%
Sodium Cocoyl Glutamate
Sodium Hydroxide solution 0.50%(10% in water)
Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Glycerin 3.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Emulsogen® SRO (Clariant) 1.00%Rapeseed Oil Sorbitol Esters
Mineral Oil, perliquidum 5.00%Isopropyl Palmitate 6.00%Jojoba Oil 2.00%Caprylic/Capric Triglyceride 4.00%Soybean Oil 3.00%
[B] Aristoflex® AVC (Clariant) 1.00%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Tetrasodium EDTA 0.10%Citric Acid (10% aqueous) 0.30%Glycerin 3.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Mix [A] and [B].
[2] Stir [C] into [1].
[3] Add [D] to [2].
[4] Finally homogenize theemulsion.
[1] Mix [A] and [B].
[2] Stir the solution of [C] into [1].
[3] Add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Skin Milk A VI / 1257cold processing, free of ethoxylated substances,free of mineral Oil
O/W-Skin Milk A VI / 1465cold processing
> 28
http:// fun.clariant.com
> 29
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[A] Hostaphat® KL 340 D (Clariant) 1.50%Trilaureth-4 Phosphate
Hostacerin® DGSB (Clariant) 4.00%PEG-4 Polyglyceryl-2 Stearate
Mineral Oil, low viscosity 3.00%Isopropyl Palmitate 3.00%Cetiol® SN Cetearyl Isononanoate 3.00%Jojoba Oil 3.00%Walnut Oil 3.00%D-Panthenol 1.00%Beta-Carotene q.s.Antioxidant q.s.
[B] Carbopol® 980 Carbomer 0.40%[C] Allantoin (Clariant) Allantoin 0.20%
Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Glycerin 3.00%Sodium Hydroxide solution (10%) 1.60%Water ad 100.00%
[D] Collagen 3.00%Alcohol denat. 1.50%Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
After Sun Milk A VI / 3016co-emulsifier enhances stability
[1] Melt [A] at approx. 70°C,then add [B].
[2] Heat [C] to approx. 70°C.
[3] Stir [2] into [1] and stiruntil cool.
[4] At approx. 35°C add [D] to [3].
[5] Homogenize the emulsion.
[A] Hostaphat® KL 340 D (Clariant) 3.00%Trilaureth-4 Phosphate
Mineral Oil, high viscosity 10.00%Isopropyl Palmitate 5.00%
[B] Aristoflex® AVC (Clariant) 0.80%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Glycerin 3.00%Water ad 100.00%Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Mix [A] and [B].
[2] Stir [C] into [1], then add [D].
[3] Finally homogenize theemulsion.
O/W-Skin Milk A VI / 1469manufacturing at roomtemperature
[A] Hostaphat® KL 340 D (Clariant) 3.00%Trilaureth-4 Phosphate
Hostacerin® DGSB (Clariant) 5.00%PEG-4 Polyglyceryl-2 Stearate
Mineral Oil, low viscosity 6.00%Isopropyl Palmitate 6.00%Cetiol® V Decyloleate 6.00%Neo Heliopan® AV 4.00%Ethylhexyl Methoxycinnamate
Avocado Oil 1.00%Panthenol 0.50%
[B] Carbopol® 980 Carbomer 0.40%[C] Sodium Hydroxide solution 1.60%
(10% in water)
Glycerin 3.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C, then add [B].
[2] Heat [C] to approx. 70°C.
[3] Stir [2] into [1] and stir until cool.
[4] At approx. 35°C add [D] to [3].
[5] Homogenize the emulsion.
O/W-Sun Screen Milk A VI / 7003co-emulsifier enhances viscosityand stability
[A] Hostaphat® CC 100 (Clariant) 1.00%Cetyl Phosphate
Abil Care® 85 0.50%Dimethicone Copolyol
Stearic Acid 0.50%Cetyl Alcohol 0.50%Cutina® GMS 1.00%Glyceryl Stearate
Cetearyl Isononanoate 4.00%Caprylic/Capric Triglyceride 4.00%Neo Heliopan® AV 6.00%Ethylhexyl Methoxycinnamate
Neo Heliopan® BB 1.50%Benzophenone-3
Neo Heliopan® MBC 4.00%4-Methylbenzylidene Camphor
[B] Carbopol® 980 0.20%Carbomer
[C] Tetrasodium EDTA 0.10%Glycerin 3.00%Eusolex® 232 2.00%Phenylbenzimidazone Sulfonic Acid
Sodium Hydroxide solution 2.20%(10% in water)
Citric Acid (10% in water) 0.30%Water ad 100.00%Tocopheryl Acetate 0.50%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C, then add the components of [B].
[2] Heat [C] to 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] At 35°C add [D] to [3].
[5] Finally homogenize theemulsion.
O/W-Sun Protection MilkA VI / 7405
easy spreadability, with Cetyl Phosphate as specialemulsifier for organic sun filters,contains Oxybenzon
> 30
http:// fun.clariant.com
> 31
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[1] Mix [A] and [B] at 80°C.
[2] Stir [C] into [1].
[3] Add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Sun Screen Milk A VI / 7403contains no ethoxylatedsubstances, contains Oxybenzon
[A] Hostaphat® CS 120 (Clariant) 3.00%Stearyl Phosphate
Mineral Oil, low viscosity 4.00%Cetiol® SN 4.00%Cetearyl Isononanoate
Cetiol® 868 4.00%Octyl Stearate
Neo Heliopan® E 1000 8.50%Isoamyl p-Methoxycinnamate
Neo Heliopan® BB 8.50%Benzophenone-3
Panthenol 1.00%[B] Carbopol® 980 0.50%
Carbomer
[C] Hostapon® CCG (Clariant) 0.60%Sodium Cocoyl Glutamate
Tetrasodium EDTA 0.10%Allantoin (Clariant) 0.30%Allantoin
Sodium Hydroxide solution 2.90%(10% in water)
Citric Acid (10% in water) 0.25%Glycerin 5.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
> 32
[A] Emulsogen® SRO (Clariant) 4.00%Rapseseed Oil Sorbitol Esters
Eutanol® G Octyldodecanol 4.50%Parsol® MCX 10.00%Ethylhexyl Methoxycinnamate
Parsol® 1789 5.00%Butyl Methoxydibenzoylmethane
Parsol® 5000 4.00%4-Methylbenzylidene Camphor
[B] Aristoflex® AVC (Clariant) 0.60%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water 40.00%[D] Water ad 100.00%
Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Glycerin 3.00%Panthenol 0.50%Citric Acid (10% in water) 0.20%
[E] Alcohol denat. 5.00%Fragrance 0.30%Tocopheryl Acetate 0.50%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
Isopropyl Palmitate 5.00%Mineral Oil, perliquidium 10.00%Neo Heliopan® E 1000 8.50%Isoamyl p-Methoxycinnamate
Neo Heliopan® BB Benzophenone-3 1.50%[B] Aristoflex® AVC (Clariant) 0.60%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%Glycerin 3.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C.
[2] Then add [B] to [1].
[3] Heat [C] to approx 70°C.
[4] Prepare intermediate W/Oemulsion: stir [3] into [1] withhigh speed dispersion tool(Ultra Turrax) for about 2 min.
[5] Stir solution [D] slowly into [4] at room temperature and stiruntil cool (minimum 2 hours).
[6] Stir [E] into [4] and stir for 1 hour.
[1] Melt [A] at approx. 60°C, then add [B].
[2] Add [C] and stir well.
[3] At approx. 35°C add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Sprayable Sun ProtectionA VI / 7407
smooth skin feeling due toacyl glutamate, no ethoxylated substances
O/W Sun Screen Milk A VI / 7408formulated with polymericemulsifier Aristoflex® PEA
excellent spreadability and fastabsorption, provides dryaesthetic feel without tackiness
fast breaking formulation withcooling effect
contains Oxybenzon
http:// fun.clariant.com
> 33
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[A] Hostaphat® KL 340 D (Clariant) 3.00%Trilaureth-4 Phosphate
Mineral Oil, low viscosity 10.00%Isopropyl Palmitate 5.00%Neo Heliopan® E 1000 8.50%Isoamyl p-Methoxycinnamate
Neo Heliopan® BB Benzophenone-3 1.50%[B] Aristoflex® AVC (Clariant) 0.90%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Glycerin 3.00%Water ad 100.00%Allantoin (Clariant) Allantoin 0.30%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 40°C.
[2] Stir [B] into [1].
[3] Heat [C] to approx. 40°C.
[4] Stir [3] into [2] and stir until cold, then add [D].
[5] Homogenize the emulsion.
O/W-Sun Milk A VI / 7409contains Oxybenzone
[A] Hostaphat® KL 340 D (Clariant) 2.00%Trilaureth-4 Phosphate
Glyceryl Stearate 0.50%Cetyl Alcohol 0.50%Myritol® 318 Caprylic/Capric Triglyceride 1.00%Crodamol® AB C12 – 15 Alkyl Benzoate 4.00%Neo Heliopan®AV Octyl Methoxycinnamate 6.00%Eusolex® 6300 4-Methylbenzylidene Camphor 3.00%Nanox® 200 Gel C12 – 15 Alkyl Benzoate 4.00%(and) Zinc Oxide (and) Polyhydroxystearic Acid
SilCare™ Silicone 41M15 (Clariant) 1.00%Caprylyl Methicone
SilCare™ Silicone 41M65 (Clariant) 2.00%Stearyl Dimethicone
[B] Aristoflex® AVC (Clariant) 1.00%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%Propylene Glycol 3.00%Tinosorb® M 5.00%Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 80°C.
[2] Heat [C] to approx. 80°C.
[3] Stir [B] into [A] and add [C] to [1].
[4] At approx. 30°C stir [D] into [3].
O/W-Sun Screen A VI / 7417very good spreadability and skin feeling,in vitro SPF 17
> 34
[A] Emulsogen® SRO (Clariant) 4.00%Rapseseed Oil Sorbitol Esters
Caprylic/Capric Triglyceride 1.00%Cetearyl Isononanoate 0.50%Mineral Oil, low viscosity 0.50%Isopropyl Palmitate 0.50%Cetearyl Alcohol 0.50%
[B] Carbopol® 980 Carbomer 0.20%[C] Water 44.10%
Sodium Hydroxide solution (10% in water) 0.50%[D] Water ad 100.00%
Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Glycerin 5.00%Panthenol 0.50%
[E] Tocopheryl Acetate 0.20%Alcohol denat. 4.00%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C.
[2] Then add [B] to [1].
[3] Heat [C] to approx 70°C.
[4] Prepare intermediate W/Oemulsion: stir [3] into [1] withhigh speed dispersion tool(Ultra Turrax) for about 2 min.
[5] Stir solution [D] withoutheating slowly into [4] and stiruntil cool (minimum 2 hours).
[6] Then add [E] to [5].
Après Spray A VI / 9001contains no ethoxylatedsubstances, no PIT method
http:// fun.clariant.com
> 35
Skin Care Preparations
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Liqu
id O
il-in
-Wat
er E
mul
sion
s
Product name Recipe Procedure
Skin Care Preparations
[A] Hostaphat® KW 340 D (Clariant) 6.00%Triceteareth-4 Phosphate
Cetyl Alcohol 2.50%[B] Urea 5.00%
Citric Acid (50% in water) 1.50%Water ad 100.00%Preservative q.s.
[C] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 70°C.
[2] Heat [B] to 70°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] Add [C] to [4] at 35°C.
O/W-Skin Milk A VI / 8100with urea, pH 3.5
[A] Hostaphat® KL 340 D (Clariant) 1.00%Trilaureth-4 Phosphate
Hostacerin® DGSB (Clariant) 4.00%PEG-4 Polyglyceryl-2 Stearate
Mineral Oil, low viscosity 5.00%Eutanol® G Octyldodecanol 8.00%Isopropyl Isostearate 5.00%Jojoba Oil 2.00%
[B] Carbopol® 980 0.30%Carbomer
[C] Octopirox® (Clariant) 0.20%Piroctone Olamine
[D] Propylene Glycol 10.00%[E] Sodium Hydroxide (10% in water) 0.40%
Water ad 100.00%[F] Fragrance 0.30%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 60°C, then add [B].
[2] Dissolve [C] in warmed [D].
[3] Stir [2] into [1].
[4] Heat [E] to 60°C.
[5] Stir [4] into [3].
[6] Stir until cool.
[7] At 35°C add [F] to [6].
[8] Homogenize if necessary.
O/W-Skin Milk A VI / 8706anti acne, with Octopirox®
[A] Emulsogen® SRO (Clariant) 4.00%Rapseseed Oil Sorbitol Esters
Soybean Oil 1.00%Almond Oil 0.40%Avocado Oil 0.40%Jojoba Oil 0.20%Glyceryl Stearate 1.00%Dow Corning® 2501 Cosmetic Wax 2.00%Dimethicone Copolyol
[B] Carbopol® 980 Carbomer 0.20%[C] Water 59.40%
Sodium Hydroxide solution (10% in water) 0.40%[D] Water ad 100.00%
Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Citric Acid (10% in water) 0.20%Fragrance 0.20%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C.
[2] Then add [B] to [1].
[3] Heat [C] to approx 70°C.
[4] Prepare intermediate W/Oemulsion: stir [3] into [1] withhigh speed dispersion tool(Ultra Turrax) for about 2 min.
[5] Stir solution [D] without heating slowly into [4] and stir until cool (minimum 2 hours).
Basic Sprayable EmulsionA VI / 9003
contains no ethoxylatedsubstances, no PIT method,with dimethicone copolyol
> 36
http:// fun.clariant.com
> 37
Skin Care Preparations
Product name Recipe ProcedureProduct name Recipe Procedure
Skin Care Preparations
Liqu
id W
ater
-in-O
il Em
ulsi
ons
[A] Hostacerin® WO (Clariant) 2.00%Polyglyceryl-2 Sesquiisostearate (and)Beeswax (and) Microcrystalline Wax (and)Mineral Oil (and) Magnesium Stearate (and) Aluminum Stearate
Arlacel® 989 2.00%PEG-7 Hydrogenated Castor Oil
Mineral Oil, high viscosity 15.00%Isopropyl Palmitate 5.00%Eutanol® G 5.00%Octyldodecanol
[B] Sodium Chloride 2.00%Water ad 100.00%
[C] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Emulsogen® SRO (Clariant) 2.00%Rapeseed Oil Sorbitol Esters
PEG-7 Hydrogenated Castor Oil 2.00%Mineral Oil, low viscosity 14.00%Isopropyl Palmitate 5.00%Octyldodecanol 5.00%Magnesium Stearate 0.70%
[B] Sodium Chloride 2.00%Water ad 100.00%
[C] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C.
[2] Stir the cold solution of [B]into [1].
[3] Stir until cool.
[4] Add [C] to [3] at 35°C.
[1] Melt [A] at 80°C.
[2] Stir cold [B] into [1].
[3] Stir until cool.
[4] At 35°C add [C] to [3].
W/O-Skin Milk A VI / 2202with salt for enhanced coldstability
W/O-Skin Milk A VI / 2300with salt
Liqu
id W
ater
-in-O
il Em
ulsi
ons
[A] Hostacerin® WO (Clariant) 2.00%Polyglyceryl-2 Sesquiisostearate (and) Mineral Oil(and) Beeswax (and) Microcrystalline Wax (and)Magnesium Stearate (and) Aluminum Stearate
Arlacel® 989 3.00%PEG-7 Hydrogenated Castor Oil
Petrolatum 10.00%Mineral Oil, high viscosity 10.00%Isopropyl Palmitate 5.00%Eutanol® G Octyldodecanol 5.00%Tocopheryl Acetate 0.50%Panthenol 0.50%Beta-Carotene q.s.
[B] Sodium Chloride 2.00%Water ad 100.00%
[C] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Hostacerin® WO (Clariant) 2.00%Polyglyceryl-2 Sesquiisostearate (and) Mineral Oil(and) Beeswax (and) Microcrystalline Wax (and)Magnesium Stearate (and) Aluminum Stearate
Arlacel® 989 2.00%PEG-7 Hydrogenated Castor Oil
Mineral Oil, low viscosity 10.00%Eutanol® G Octyldodecanol 5.00%Isopropyl Palmitate 5.00%Neo Heliopan® E 1000 4.00%Isoamyl p-Methoxycinnamate
Neo Heliopan® BB Benzophenone-3 1.00%[B] Sodium Chloride 2.00%
Water ad 100.00%[C] Fragrance 0.30%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C.
[2] Stir cold solution [B] with high speed dispersion tool (Ultra Turrax) into [1].
[3] Stir [C] in [2] at 35°C.
[1] Melt [A] at 80°C.
[2] Stir the cold solutionof [B] into [2].
[3] Stir until cool.
[4] Add [C] to [3] at 35°C.
W/O-Skin Milk A VI / 3300very rich skin feeling
W/O-Sun Protection MilkA VI / 7300
contains Oxybenzon
[A] Hostacerin® DGL (Clariant) 1.00%Polyglyceryl-2 PEG-10 Laurate
Hostacerin® DGSB (Clariant) 5.00%PEG-4 Polyglyceryl-2 Stearate
Almond Oil 10.00%Sun Flower Oil 4.00%Jojoba Oil 2.00%
[B] Carbopol® 980 Carbomer 0.40%[C] Tetrasodium EDTA 0.10%
Citric Acid (10% in water) 0.30%Glycerin 3.00%Sodium Hydroxide solution (10% in water) 1.60%Water ad 100.00%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 70°C, then add [B].
[2] Heat [C] to 70°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] Add [D] to [4] at 35°C.
[6] Finally homogenize theemulsion.
O/W-Cream AVI / 1852free of mineral oil, co-emulsifier enhances stabilityand viscosity
> 38
http:// fun.clariant.com
> 39
Skin Care Preparations
Product name Recipe ProcedureProduct name Recipe Procedure
Skin Care Preparations
Oil-i
n-W
ater
Cre
ams
[A] Hostaphat® CS 120 (Clariant) 1.00%Stearyl Phosphate
Tegin® M Glyceryl Stearate 2.00%Stearic Acid 2.00%Cetyl Alcohol 1.00%Abil® 100 Dimethicone 1.00%Cetiol® 868 Caprylic/Capric Triglyceride 5.00%Mineral Oil, low viscosity 4.00%Isopropyl Palmitate 4.00%Jojoba Oil 2.00%Tocopheryl Acetate 0.50%
[B] Hostapon® KCG (Clariant) 0.60%Sodium Cocoyl Glutamate
Allantoin (Clariant) Allantoin 0.20%Sorbitol 2.00%Panthenol 1.00%Sodium Hydroxide solution (10% in water) 1.00%Glycerin 3.00%Water ad 100.00%
[C] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 70°C.
[2] Heat [B] to 60°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] Add [C] to [4] at 35°C.
[6] Finally homogenize theemulsion.
O/W-Cream A VI / 1503no ethoxylated substances,no carbomer, with dimethicone
Oil-i
n-W
ater
Cre
ams
[A] Hostaphat® KW 340 D (Clariant) 2.00%Triceteareth-4 Phosphate
Hostacerin® DGMS (Clariant) 3.00%Polyglyceryl-2 Stearate
Stearic Acid 2.00%Cetyl Alcohol 2.00%Cetyl Palmitate 1.00%Lunacera® M Microcrystalline Wax 1.00%Miglyol® 812 Caprylic/Capric Triglyceride 7.00%Abil® 100 Dimethicone 1.00%Mineral Oil, low viscosity 5.00%Jojoba Oil 2.00%Tocopheryl Acetate 1.00%
[B] Carbopol® 980 Carbomer 0.20%[C] Sodium Hydroxide solution (10% in water) 0.80%
Glycerin 3.00%Water ad 100.00%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C,then add [B].
[2] Heat [C] to approx. 70°C.
[3] Stir [2] into [1] and stir until cool.
[4] At approx. 35°C add [D] to [3].
[5] Homogenize the emulsion.
O/W-Night Cream AVI / 1711heavy
[A] Emulsogen® SRO (Clariant) 1.00%Rapeseed Oil Sorbitol Esters
Mineral Oil, low viscosity 5.00%Isopropyl Palmitate 5.00%Avocado Oil 5.00%Caprylic/Capric Triglyceride 5.00%Jojoba Oil 2.00%
[B] Carbopol® 980 Carbomer 0.70%[C] Hostapon® CCG (Clariant) 0.60%
Sodium Cocoyl Glutamate
Sodium Hydroxide solution (10% in water) 1.00%Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.30%Glycerin 4.00%Water ad 100.00%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Mix [A] and [B].
[2] Stir the solution of [C] into [1].
[3] Add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Cream AVI / 1951cold processing, free of ethoxylated substances
> 40
http:// fun.clariant.com
> 41
Skin Care Preparations
Product name Recipe ProcedureProduct name Recipe Procedure
Skin Care Preparations
[A] Emulsogen® SRO (Clariant) 1.00%Rapeseed Oil Sorbitol Esters
Glycerin Stearate 3.00%Stearic Acid 2.00%Octylstearate 4.00%Decyl Oleate 3.00%Octyldodecanol 2.00%
[B] Carbopol® 980 Carbomer 0.30%[C] Tetrasodium EDTA 0.10%
Hostapon® CCG (Clariant) 0.60%Sodium Cocoyl Glutamate
Citric Acid (10% in water) 0.30%Sodium Hydroxide solution (10% in water) 0.50%Glycerin 4.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 70°C, then add [B].
[2] Heat [C] to 70°C.
[3] Stir [2] into [1], then stir untilcool.
[4] At 35°C add [D] to [3].
[5] Finally homogenize theemulsion.
O/W-Softcream AVI / 1952no ethoxylated substances,free of mineral oil
Oil-i
n-W
ater
-Cre
ams
Oil-i
n-W
ater
-Cre
ams
[A] Hostacerin® DGI (Clariant) 2.00%Polyglyceryl-2 Sesquiisostearate
Isopropyl Palmitate 4.00%Octyldodecanol 4.00%
[B] Aristoflex® AVC (Clariant) 1.20%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Hostapon® CCG (Clariant) 0.80%Sodium Cocoyl Glutamate
Water ad 100.00%[D] Fragrance 0.40%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Stir [B] into [A], then add [C] and stir well.
[2] Stir [D] into [1].
[3] Finally homogenize theemulsion.
O/W-Cream AVI / 1956no ethoxylated substances,manufacturing at roomtemperature, special texture,fast absorption, less sticky
[A] Hostaphat® CC 100 (Clariant) 1.00%Cetyl Phosphate
Myritol® 318 Caprylic/Capric Triglyceride 5.00%Cetiol® OE Dicaprylyl Ether 5.00%Almond Oil 3.00%Avocado Oil 2.00%Dow Corning® 345 Cyclomethicone 5.00%Stearic Acid 4.00%Cetyl Alcohol 1.00%Cutina® GMS Glyceryl Stearate 4.00%
[B] Water ad 100.00%Glycerin 5.00%Sodium Citrate 1.00%Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%
[C] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C.
[2] Heat [B] at approx. 70°C.
[3] Stir [2] into [1] and stir until cool. At approx. 35°C add [C] to [3].
[4] Homogenize the emulsion.
O/W-Cream AVI / 1954no ethoxylated substances,free of mineral oil, contains cyclomethicone
[A] Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
Isopropyl Palmitate 6.00%Jojoba Oil 5.00%Cetiol® V 7.00%Decyl Oleate
Cetyl Alcohol 0.50%[B] Aristoflex® AVC (Clariant) 0.90%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%[D] Fragrance 0.30%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 60°C, then add [B].
[2] Add [C] and stir well(300 RPM).
[3] At approx. 35°C add [D] to [2].
[4] Finally homogenize theemulsion.
O/W-Soft Cream AVI / 1957formulated with polymericemulsifier Aristoflex® PEA
excellent spreadability and fastabsorption, provides dry,aesthetic feel without tackiness
fast breaking formulation withcooling effect
light O/W cream suitable aselegant after sun formulation
http:// fun.clariant.com
> 43> 42
Oil-i
n-W
ater
-Cre
ams
Product name Recipe ProcedureProduct name Recipe Procedure
[A] Aristoflex® PEA (Clariant) 2.00%Polypropylene Terephthalate
Myritol 318 Caprylic/Capric Triglyceride 5.00%Cetiol OE Dicaprylyl Ether 5.00%Almond Oil 3.00%Avocado Oil 2.00%Dow Corning 345 Cyclomethicone 5.00%Stearic Acid 4.00%Cetyl Alcohol 1.00%Cutina GMS Glyceryl Stearate 4.00%
[B] Aristoflex® AVC (Clariant) 1.00%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Glycerin 5.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 60°C,then add [B].
[2] Add [C] and stir well.
[3] At approx. 35°C add [D] to [2].
[4] Finally homogenize theemulsion.
O/W Cream AVI / 1960formulated with polymericemulsifier Aristoflex® PEA,excellent spreadability
Skin Care PreparationsSkin Care Preparations
Oil-i
n-W
ater
-Cre
ams
[A] Hostacerin® DGO (Clariant) 2.00%Polyglyceryl-2 sequiisooleate
SilCare™ Silicone 1M71 (Clariant) 6.00%Stearoxy Trimethylsilane
Myritol 318 Caprylic/Capric Triglyceride 10.00%Abil 100 Dimethicone 1.00%Dow Corning 345 Cyclomethicone 3.00%
[B] Aristoflex® AVC (Clariant) 0.80%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%[D] Keltrol F Xanthan Gum 0.30%[E] Polyglycol 400 (Clariant) PEG-8 3.00%
Hostapon® KCG (Clariant) 1.00%Sodium Cocoyl Glutamate
[F] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Stir [D] into [C] and let swellfor 24 h and add [E].
[2] Stir [B] into [A].
[3] Add [1] into [2].
[4] Finally stir the components of [F] into [3].
O/W-Cream AVI / 1975cold processed,with SilCare™ 1M71 as opacifier,high gloss
[A] Hostaphat® KW 340 D (Clariant) 1.00%Triceteareth-4 Phosphate
Glycerin Stearate 0.50%Cetearyl Alcohol 0.50%Mineral Oil, low viscosity 7.00%Isopropyl Palmitate 6.00%SilCare™ Silicone 41M15 (Clariant) 1.00%Caprylyl Methicone
Caprylic/Capric Triglyceride 2.00%Benzophenone-3 1.00%
[B] Aristoflex® AVC (Clariant) 1.00%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%Glycerin 5.00%Tinosorb® M 3.00%Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
Allantoin (Clariant) 0.30%Allantoin
[D] Tocopheryl Acetate 1.00%Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at about 70°C.
[2] Heat [C] to about 70°C.
[3] Stir [B] into [A] and add heated [C] immediately and stir until cool.
[4] At about 30°C stir [D] into [3].
O/W-Day Cream with UVA and UVB protectionAVI / 1973
with Triceteareth-4 Phosphate,volatile Caprylyl Methicone,Aristoflex® AVC,Allantoin
in vitro SPF: about 5
http:// fun.clariant.com
> 45> 44
Oil-i
n-W
ater
-Cre
ams
Product name Recipe Procedure
Oil-i
n-W
ater
-Cre
ams
Product name Recipe Procedure
[A] Hostaphat® CS 120 (Clariant) 5.00%Stearyl Phosphate
Tegin® M 2.50%Glyceryl Stearate
Stearic Acid 2.00%Cetyl Alcohol 1.00%Abil® 100 2.00%Dimethicone
Mineral Oil, low viscosity 3.00%Cetiol® 868 3.00%Octyl Stearate
Myritol® 318 3.00%Caprylic/Capric Triglyceride
Eusolex® 6300 5.00%4-Methylbenzylidene Camphor
[B] Pemulen® TR 1 0.20%Acrylates/C10 – 30 Alkylacrylate Cross Polymer
UV-Titan M210 5.00%Ultrafine Titanium Dioxide
[C] Hostapon® CLG (Clariant) 0.60%Sodium Lauroyl Glutamate
Eusolex® 232 4.00%Phenylbenzimidazone Sulfonic Acid
Tris (hydroxymethyl) aminomethan 2.21%Tromethamine
Allantoin (Clariant) 0.20%Allantoin
Glycerin 5.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C, then add the components of [B].
[2] Homogenize [1] (Ultra Turrax).
[3] Heat [C] to 80°C.
[4] Stir [2] into [1].
[5] Stir until cool.
[6] Add [D] to [4] at 35°C.
[7] Finally homogenize theemulsion.
O/W Sun Blocker CreamAVI / 7401
no ethoxylated substances
[A] Hostaphat® KW 340 D (Clariant) 2.00%Triceteareth-4 Phosphate
Mineral Oil, high viscosity 3.00%Isopropyl Palmitate 1.00%Polyglycol 400 (Clariant) 1.50%PEG-8
Stearic Acid 10.00%[B] Triethanolamine 1.00%
Sorbitol (70% in water) 2.00%Water ad 100.00%
[C] Luviskol® VA 64 Powder 10.00%PVP/VA Copolymer
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Hostacerin® DGSB (Clariant) 6.00%PEG-4 Polyglyceryl-2 Stearate
Hostacerin® T-3 (Clariant) 5.00%Ceteareth-3
Mineral Oil, high viscosity 2.00%Coconut Oil 2.00%Isopropyl Palmitate 1.00%Antioxidant q.s.
[B] Water ad 100.00%Propylene Glycol 5.00%Urea 3.00%
[C] Calcium Thioglycolate (trihydrate) 7.50%Calcium Hydroxide, powder 1.50%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 90°C.
[2] Dissolve [C] in [B] at 90°C.
[3] Stir [2] into [1] and stir at 90°C for 30 minutes, then stir until cool.
[4] Add [D] to [3] at 35°C.
[5] Finally homogenize theemulsion.
[1] Melt [A] at about 70°C.
[2] Heat [B] at about 70°C.
[3] Stir [2] into [1] and stir until cool.
[4] Stir the components of [C]into [3], then add [D].
[5] Homogenize the emulsion.
Hand Protction Cream AVI / 6600with film forming agent
Depilatory Cream AVI / 8703high pH-value
Skin Care PreparationsSkin Care Preparations
http:// fun.clariant.com
> 47> 46
Oil-i
n-W
ater
-Cre
ams
Product name Recipe Procedure
Oil-i
n-W
ater
-Cre
ams
Product name Recipe Procedure
[A] Hostaphat® KL 340 D (Clariant) 3.50%Trilaureth-4 Phosphate
Cetearyl Alcohol 13.50%Mineral Oil, high viscosity 18.00%
[B] Dihydroxyacetone 5.00%[C] Phosphate buffer, pH 6 15.00%
(see procedure)
[D] Water ad 100.00%[E] Fragrance 0.40%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Hostaphat® KW 340 D (Clariant) 2.00%Triceteareth-4 Phosphate
Hostacerin® DGSB (Clariant) 7.00%PEG-4 Polyglyceryl-2 Stearate
Mineral Oil, low viscosity 5.00%Eutanol® G 8.00%Octyldodecanol
Isopropyl Isostearate 5.00%[B] Carbopol® 980 Carbomer 0.30%[C] Octopirox® (Clariant) 0.20%
Piroctone Olamine
Propylene Glycol 10.00%[D] Sodium Hydroxide solution
(10% in water) 0.40%Water ad 100.00%
[E] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 70°C.
[2] Heat [C] to approx. 70°C.
[3] Stir [2] into [1] and stir cool.
[4] Dissolve [B] in [C] while gentlyheating.
[5] At approx. 35°C add warmed[B] to [3].
Composition of phosphate buffer [C]1000ml of 0.1mol KH2PO4-solution = 13.62g/l
114ml of 0.1mol NaOH-solution= 4g/l
886ml destilled water
[1] Melt [A] at 60°C, then add [B].
[2] Dissolve [C] in warmed [D].
[3] Stir [2] into [1].
[4] At 35°C add [E] to [3].
[5] Homogenize if necessary.
O/W-Tanning Cream AVI / 8505with dihydroxyacetone
O/W-Cream AVI / 8608with bacteriostatic effect,co-emulsifier enhances stability
[A] Hostaphat® CC 100 (Clariant) 2.00%Cetyl Phosphate
Stearic Acid 3.50%Cetyl Alcohol 1.00%Cetiol LC 2.00%Coco-Caprylate/Caprate
Cetiol® V 2.00%Decyl Oleate
Caprylic/Capric Triglyceride 1.00%Dow Corning® 200 0.50%Dimethicone
Antaron® V-220 1.00%PVP/Eicosene Copolymer
Eusolex® 6300 2.00%4-Methylbenzylidene Camphor
Eusolex® 9020 1.00%Butyl Methoxydibenzoylmethane
[B] Tocopheryl Acetate 0.50%Panthenol 1.00%Carbopol® 980 0.20%Carbomer
[C] Eusolex® T-2000 3.00%Titanium Dioxide (and) Alumina (and) Simethicone
Water ad 100.00%[D] Tetrasodium EDTA 0.10%
Tris (hydroxymethyl) aminomethan 0.90%Tromethamine
Eusolex® 232 2.00%Phenylbenzimidazone Sulfonic Acid
Propylene Glycol 5.00%Sodium Hydroxide solution 3.60%(10% in water)
Allantoin (Clariant) 0.20%Allantoin
[E] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C, then add the components of [B].
[2] Allow [C] to swell over night at room temperature, then add [D] and heat up to 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] At 35°C add [E] to [3].
[5] Finally homogenize theemulsion.
O/W-Sun Protection MilkAVI / 7404
with Titanium Dioxide, however easy spreadability, no whitening effect
Skin Care PreparationsSkin Care Preparations
http:// fun.clariant.com
> 49> 48
Wat
er-in
-Oil
Crea
ms
Product name Recipe Procedure
Oil-i
n-W
ater
-Cre
ams
Product name Recipe Procedure
[A] Hostacerin® WO (Clariant) 10.00%Polyglyceryl-2 Sesquiisostearate (and) Beeswax (and) Microcrystalline Wax (and) Mineral Oil (and) Magnesium Stearate (and) Aluminum Stearate
Permulgin® 3510 4.00%Mineral Oil (and) Isopropyl Myristrate (and) Beeswax
Mineral Oil, low viscosity 7.00%Isopropyl Palmitate 7.00%Sunflower Oil 5.00%Almond Oil 3.00%Wheat Germ Oil 2.00%Antioxidant q.s.
[B] Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.25%Glycerin 4.00%Magnesium Sulfate 1.00%Water ad 100.00%
[C] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C.
[2] Heat [B] to 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] Add [C] to [3] at 35°C.
W/O-Cream AVI / 2713[A] Hostaphat® KW 340 D (Clariant) 2.00%Triceteareth-4 Phosphate
Hostacerin® DGSB (Clariant) 7.00%PEG-4 Polyglyceryl-2 Stearate
Solulan® 98 1.00%Polysorbate 80 (and) Cetyl Acetate (and)Acetylated Lanolin Alcohol
Cetylstearyl Alcohol 3.00%Panthenol 1.00 %Mineral Oil, perliquidum 5.00%Eutanol® G 8.00%Octyldodecanol
Isoproypl Isostearate 5.00%Phytoconcentrol Camomile, oil soluble 0.50%Bisabolol
[B] Kaolin 3.00%Carbopol® 980 0.50%Carbomer
[C] Sodium Hydroxide Solution 1.05%(10% in water)
Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Crataegus Monogina Fruit Extract 1.00%Allantoin (Clariant) 0.20%Allantoin
Water ad 100.00%[D] Octopirox® (Clariant ) 0.20%
Piroctone Olamine
[E] Propylene Glycol 15.00%[F] Veragel liquid 2.00%
Aloe Barbadensis Leaf Juice
Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 70°C, then add the components of [B].
[2] Heat [C] to 70°C.
[3] Stir [2] into [1] and stir until cool.
[4] Dissolve [D] in [E] at approx. 40°C.
[5] Stir the solution of [4] into [3].
[6] At 35°C stir the components of [F] into [5].
[7] Finally homogenize theemulsion.
ApplicationAllow to work for 15 minutes,remove with a damp cloth.
O/W-Facial Mask AVI / 8707anti acne with Octopirox®
Skin Care PreparationsSkin Care Preparations
http:// fun.clariant.com
> 51> 50
Wat
er-in
-Oil
Crea
ms
Product name Recipe Procedure
Wat
er-in
-Oil
Crea
ms
Product name Recipe Procedure
[A] Hostacerin® WO (Clariant) 10.00%Polyglyceryl-2 Sesquiisostearate (and) Beeswax (and) Microcrystalline Wax (and)Mineral Oil (and) Magnesium Stearate (and) Aluminium Stearate
Lunacera® MW 1.00%Microcrystalline Wax
Beeswax 1.00%Amerlate® W 1.00%Isopropyl Lanolate
Petrolatum 23.00%Mineral Oil, high viscosity 10.00%Calendula Oil 2.00%Antioxidant q.s.
[B] Zinc Oxide 25.00%Talc 20.00%
[C] Water ad 100.00%Citric Acid (10% in water) 0.25%Allantoin (Clariant) 0.20%Allantoin
Tetrasodium EDTA 0.10%[D] Fragrance 0.20%
Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx 80°C, add [B].
[2] Heat [C] to approx 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] At approx. 35°C add [D] to [3].
W/O-Baby Cream AVI / 5802with high amount of zinc oxideand talcum
[A] Emulsogen® SRO (Clariant) 4.00%Rapeseed Oil Sorbitol Esters
Beeswax 2.00%Lunacera® M Microcrystalline Wax 2.00%Magnesium Stearate 1.50%Mineral Oil, low viscosity 7.00%Isopropyl Palmitate 5.00%Myritol® 318 Caprylic/Capric Triglyceride 4.00%Cetiol® V Decyl Oleate 4.00%
[B] Tetrasodium EDTA 0.10%Citric Acid (10% in water) 0.30%Glycerin 4.00%Magnesium Sulfate 0.70%Water ad 100.00%
[C] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Emulsogen® SRO (Clariant) 2.00%Rapeseed Oil Sorbitol Esters
Hostacerin® DGI 1.00%Polyglyceryl-2 Sesquiisostearate
Beeswax 1.00%Microcrystalline Wax 1.00%Isopropyl Isostearate 4.00%Squalane 3.00%Caprylic/Capric Triglyceride 4.00%Avocado Oil 4.00%Wheat Germ Oil 1.00%
[B] Magnesium Stearate 1.00%[C] Tetrasodium EDTA 0.10%
Citric Acid (10% in water solution) 0.30%Glycerin 4.00%Magnesium Sulfate 0.70%Water ad 100.00%
[D] Fragrance 0.40%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at 80°C.
[2] Heat [B] to 70°C.
[3] Stir [2] into [1] and stir until cool.
[4] At 35°C add [C] to [3].
[1] Melt [A] at 80°C, then add [B].
[2] Heat [C] to 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] At 35°C add [D] to [3].
W/O-Cream AVI / 2808no ethoxylated substances
W/O-Cream AVI / 2807free of mineral oil
Skin Care PreparationsSkin Care Preparations
http:// fun.clariant.com
> 53> 52
Crea
m G
els
Product name Recipe Procedure
Wat
er-in
-Oil
Crea
ms
Product name Recipe Procedure
[A] Mineral Oil, low viscosity 6.00%Isopropyl Palmitate 3.60%Soybean Oil 2.40%
[B] Aristoflex® AVC (Clariant) 1.00%Ammonium Acryloyldimethyltaurate/VP Copolymer
[C] Water ad 100.00%Glycerin 8.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Eutanol G 14.00%Octyldodecanol
SilCare™ 31M30 (Clariant) 10.00%Caprylyl Trimethicone
[B] Aristoflex® HMB (Clariant) 0.70%Ammonium Acryloyldimethyltaurate/Beheneth-25 Metacrylate Crosspolymer
[C] Water ad 100.00%Glycerin 4.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Mix [A] and [B].
[2] Stir [C] into [1], then add [D].
[3] Finally homogenizethe emulsion.
[1] Mix [A] and [B].
[2] Stir [C] into [1], then add [D].
[3] Finally homogenizethe emulsion.
[1] Heat the components of [A] to about 80°C, then add [B].
[2] Heat [C] to approx. 80°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At approx. 35°C add [D] to [4].
Moisturizing Cream Gel AVI/ 8708
manufacturing at roomtemperature
light and fresh, with moisturing effect
provides smooth silky skin feel
fast absorbing, non greasy,non sticky
Moisturizing Cream GelAVI/8718
manufacturing at roomtemperature
light and fresh, with moisturing effect
provides smooth silky skin feel
fast absorbing, non greasy,non sticky
[A] Hostacerin® WO (Clariant) 8.00%Polyglyceryl-2 Sesquiisostearate (and) Beeswax(and) Microcrystalline Wax (and) Mineral Oil (and)Magnesium Stearate (and) Aluminium Stearate
Lunacera® MW Microcrystalline Wax 2.00%Amerlate® W Isopropyl Lanolate 2.00%Petrolatum 10.00%Mineral Oil, high viscosity 15.00%Isopropyl Palmitate 5.00%Calendula Oil 2.00%Antioxidant q.s.
[B] Zinc Oxide 10.00%Talc 5.00%
[C] Water ad 100.00%Panthenol 0.60%Citric Acid (10% in water) 0.25%Allantoin (Clariant) Allantoin 0.20%Tetrasodium EDTA 0.10%
[D] Fragrance 0.20%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[A] Emulsogen® SRO (Clariant) 3.00%Rapeseed Oil Sorbitol Esters
Hostacerin® DGI (Clariant) 2.00%Polyglyceryl 2-Sesquiisostearate
Microcrystalline Wax 2.00%Beeswax 1.00%Magnesium Stearate 1.00%Petrolatum 15.00%Mineral Oil, low viscosity 10.00%
[B] Talc 10.00%Zinc Oxide 10.00%
[C] Allantoin (Clariant) Allantoin 0.30%Calendula Officinalis Flower Extract 2.00%Panthenol 2.00%Water ad 100.00%
[D] Fragrance 0.30%Nipaguard® PDU (Clariant) q.s.Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
[1] Melt [A] at approx. 80°C, add [B].
[2] Heat [C] to approx. 80°C.
[3] Stir [2] into [1] and stir until cool.
[4] At approx. 35°C add [D] to [3].
W/O-Baby Cream AVI / 5804soft
W/O-Baby Cream AVI / 5805free of ethoxylated substances
Skin Care PreparationsSkin Care Preparations
http:// fun.clariant.com
> 55
Contents
Hair Cleansing Preparations
Hair ShampoosHair Shampoo B I / 1134 > 56clear, for daily use
Hair Shampoo B I / 1138 > 56mild
Hair Shampoo B I / 2124 > 57with a silk lustre effect
Hair Shampoo B I / 2131 > 57for dry hair, with a pearl lustre effect
Hair Shampoo B I / 2134 > 58with a pearl lustre effect
Hair Shampoo B I / 2141 > 58with a pearl lustre effect
Hair Shampoo B I / 6123 > 59clear, for greasy hair
Care ShampoosCare Shampoo B I / 1137 > 59clear, for daily use
Baby ShampoosBaby Shampoo B I / 4027 > 60clear
Baby Shampoo B I / 4042 > 60no ethoxylated substances
Conditioning ShampoosConditioning ShampooB I / 6140 > 64with a silk lustre effect
Conditioning ShampooB I / 6156 > 65clear
Antidandruff ShampoosAntidandruff ShampooB I / 6126 > 61with a pearl lustre effect
3 in 1 Antidandruff ShampooB I / 6142 > 61
Antidandruff ShampooB I / 6144 > 62clear
Antidandruff ShampooB I / 6146 > 63clear
> Pages > Pages
> 56
Hair
Sham
poo
Product name Recipe Procedure
Hair Cleansing Preparations
http:// fun.clariant.com
> 57
Hair Cleansing Preparations
Hair
Sham
poo
Product name Recipe Procedure
[A] Genapol® LRO liquid (Clariant) 35.00%Sodium Laureth Sulfate
Water ad 100.00%Genapol® TS powder (Clariant) 1.50%PEG-3 Distearate
Sodium Chloride 1.50%Genagen® CAB (Clariant) 8.00%Cocamidopropyl Betaine
[B] Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Sodium Chloride 0.50%
[A] Genapol® LRO liquid (Clariant) 30.00%Sodium Laureth Sulfate
UCARE® Polymer JR 400 0.20%Polyquaternium-10
Hostapon® SCI-65 (Clariant) 3.00%Sodium Cocoyl Isethionate
[B] Water ad 100.00%[C] Hostapon® KCG (Clariant) 6.00%
Sodium Cocoyl Glutamate
Fragrance 0.30%Genapol® L-3 (Clariant) 0.50%Laureth-3
Genapol® PGM (Clariant) 4.00%Sodium Laureth Sulfate (and) GlycolDistearate (and) Cocamide MEA
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[D] Sodium Chloride 1.00%
[1] Melt the components of [A] at 70°C.
[2] Stir until cool.
[3] At 40°C add the componentsof [B] to [2].
[4] If necessary adjust the pH.
[5] Finally adjust the viscositywith [C].
[1] Dissolve the componentsof [A] while stirring and heating to approx. 60°C in [B].
[2] Cool down and add thecomponents of [C] at approx. 35°C while stirring.
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
Hair Shampoo B I / 2124with a silk lustre effect,12.2% active ingredient
Hair Shampoo B I / 2131for dry hair,with a pearl lustre effect,15.6% active ingredient
[A] Genapol® LRO liquid (Clariant) 30.00%Sodium Laureth Sulfate
[B] Genapol® SBE (Clariant) 6.00%Disodium Laureth Sulfosuccinate
Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Fragrance 0.30%Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen CAB (Clariant) 6.00%Cocamidopropyl Betaine
Genapol® L-3 (Clariant) 2.00%Laureth-3
[C] Sodium Chloride 2.00%
[A] Ucare® Polymer JR 400 0.30%Polyquaternium-10
[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 42.90%
Sodium Laureth Sulfate
Genagen® LAA (Clariant) 6.70%Sodium Lauroamphoacetate
Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB (Clariant) 6.70%Cocamidopropyl Betaine
[D] Citric Acid (50% in water) q.s.
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscositywith [C].
[1] Dissolve [A] at 50°C in [B].
[2] Add the components of [C] one after another ino [1].
[3] Adjust the pH with [D] to 5.5.
Hair Shampoo B I / 1134clear, for daily use,15.6% active ingredient
Hair Shampoo B I / 1138mild, amphoacetate supportsconditioning effect
> 58
Hair
Sham
poo
Product name Recipe Procedure
Hair Cleansing Preparations
http:// fun.clariant.com
> 59
Hair Cleansing Preparations
Hair
Sham
poo
Care
Sha
mpo
o
Product name Recipe Procedure
[A] Hostapon® SCI-65 (Clariant) 3.60%Sodium Cocoyl Isethionate
[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 40.00%
Sodium Laureth Sulfate
Fragrance 0.30%Genapol® PGM (Clariant) 5.00%Sodium Laureth Sulfate (and) GlycolDistearate (and) Cocamide MEA
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
[D] Sodium Chloride 1.15%
[A] Genapol® LRO liquid (Clariant) 10.50%Sodium Laureth Sulfate
Water ad 100.00%[B] Genagen® CAB (Clariant) 22.10%
Cocamidopropyl Betaine
Genagen® LAA (Clariant) 15.30%Sodium Lauroamphoacetate
[C] Citric Acid (50% in water) q.s.[D] Genapol® PDB (Clariant) 4.00%
Glycol Distearate (and) Laureth-4 (and)Cocamidopropyl Betaine
[E] Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Dissolve [A] in [B] while heating to approx. 60°C and cool down.
[2] At approx. 30°C stir thecomponents of [C] one afteranother into [1].
[3] If necessary adjust the pH.
[4] Finally adjust the viscositywith [D].
[1] Add the components of [B]one after another into [A].
[2] Adjust the pH with [C].
[3] Add [D] into [2].
[4] Finally add the componentsof [E] to [3].
Hair Shampoo B I / 2134with a pearl lustre effect,16.6% active ingredient
Hair Shampoo B I / 2141with a pearl lustre effect,14% active ingredient
[A] Glucamate® DOE-120 0.70%PEG-120 Methyl Glucose Dioleate
Aristoflex® PEA 2.00%Polypropylene Terephthalate
PEG-150 Distearate 1.00%[B] Water ad 100.00%[C] Genapol® LRO liquid (Clariant) 35.00%
Sodium Laureth Sulfate
Genapol® L-3 (Clariant) Laureth-3 0.90%Genapol® AMS (Clariant) 6.00%TEA-PEG-3 Cocamide Sulfate
Genagen® CAB (Clariant) 10.00%Cocamidopropyl Betaine
[D] Merquat® 550 Polyquaternium-7 1.00%Glycerin 2.00%Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[E] Sodium Chloride 1.60%
[1] Dissolve the components of [A] into [B] at approx. 80°C.
[2] Stir the components of [C]one after another into [1].
[3] Cool down to approx. 35°Cand add the components of [D] one after another into [2] while stirring.
[4] If necessary adjust the pH.
[5] Finally adjust the viscositywith [E].
Care Shampoo B I / 1137formulated with Aristoflex® PEA
especially mild formulation with Genagen® CAB and Genapol® AMS
[A] Genapol® LRO liquid (Clariant) 50.00%Sodium Laureth Sulfate
[B] Hostapur® SAS 60 (Clariant) 6.00%Sodium C14 – 17 Sec Alkyl Sulfonate
Extrapone 5 special 3.00%Fragrance 0.30%Water ad 100.00%Genagen® CAB (Clariant) 6.00%Cocamidopropyl Betaine
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Sodium Chloride 2.00%
[1] One after another the compo-nents of [B] are added to [A].
[2] If necessary adjust the pH.
[3] Finally adjust the viscositywith [C].
Hair Shampoo B I / 6123clear, for greasy hair,19.4% active ingredient
> 60
Baby
Sha
mpo
o
Product name Recipe Procedure
Hair Cleansing Preparations
http:// fun.clariant.com
> 61
Hair Cleansing Preparations
Antid
andr
uff S
ham
poo
Product name Recipe Procedure
[A] Genapol® LRO liquid (Clariant) 21.00%Sodium Laureth Sulfate
[B] Genapol® AMS (Clariant) 10.00%TEA-PEG-3 Cocamide Sulfate
Fragrance 0.30%Water ad 100.00%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[C] Tylose® H 10000 G4 (Clariant) 1.20%Hydroxyethylcellulose
[A] Genagen® LAA (Clariant) 33.00%Sodium Lauroamphoacetate
Hostapon® CCG (Clariant) 9.00%Sodium Cocoyl Glutamate
Water ad 100.00%Citric Acid (50% in water) 4.30%Extrapone Chamomille Special 2.00%Fragrance q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] Stir the components of [B]one after another into [A].
[2] If necessary adjust the pH.
[3] Add [C] to [2] while stirringslowly and keep stirringuntil a homogeneousshampoo free of lumps hasbeen obtained.
[1] Mix one after another.
[2] Adjust viscosity with pH-value.
Baby Shampoo B I / 4027clear, 10.0% active ingredient
Baby Shampoo B I / 4042Cocamidopropyl Betaine-free,Ethersulfate-free, no ethoxylated substances, with Chamomille
[A] Octopirox® (Clariant) 0.50%Piroctone Olamine
[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 40.00%
Sodium Laureth Sulfate
[D] Genapol® PGL (Clariant) 4.00%Glycol Distearate (and) Cocamide MEA (and) PPG-4 Deceth-4
Fragrance 0.30%Water ad 100.00%Dyestuff solution q.s.Genagen® CAB (Clariant) 10.00%Cocamidopropyl Betaine
[E] Sodium Chloride 1.00%
[A] Octopirox® (Clariant) 0.40%Piroctone Olamine
[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 30.00%
Sodium Laureth Sulfate
Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Genamin® KSL (Clariant) 2.00%PEG-5 Stearyl Ammonium Lactate
Cetiol® HE PEG-7 Glyceryl Cocoate 1.00%Belsil® DMC 6032 2.00%Dimethicone Copolyol Acetate
Merquat® 550 Polyquaternium-7 5.00%Fragrance 0.30%
[D] Water ad 100.00%[E] Glucamate® DOE 120 1.00%
PEG-120 Methyl Glucose Dioleate
[F] Genagen® CAB (Clariant) 8.00%Cocamidopropyl Betaine
Genapol® L-3 (Clariant) 2.00%Laureth-3
Genapol® TSM (Clariant) 3.00%PEG-3 Distearate (and) Sodium Laureth Sulfate
[1] Mix [A] and [B].
[2] [C] is added by continuing stirring until the solution is clear.
[3] One after another thecomponents of [D] are added to [2].
[4] If necessary adjust the pH.
[5] Finally adjust the viscositywith [E].
[1] Mix [A] and [B].
[2] Add the components of [C]one after another to [1] andstir well.
[3] Dissolve [E] in [D], add to [2]and stir well.
[4] Stir the components of [F]one after another into [3].
[5] Adjust the pH to 6.0.
Antidandruff Shampoo B I / 6126with a pearl lustre effect,14.2% active ingredient
3 in 1 Antidandruff ShampooB I / 6142
17.2% active ingredient
> 62
Antid
andr
uff S
ham
poo
Product name Recipe Procedure
Hair Cleansing Preparations
http:// fun.clariant.com
> 63
Hair Cleansing Preparations
Antid
andr
uff S
ham
poo
Product name Recipe Procedure
[A] Octopirox® (Clariant) 0.50%Piroctone Olamine
[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 30.00%
Sodium Laureth Sulfate
[D] Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Fragrance 0.30%[E] UCARE® Polymer JR 400 0.30%
Polyquaternium-10
[F] Water ad 100.00%[G] Dyestuff solution q.s.
Extrapone Chamomille Special 2.00%Genagen® CAB (Clariant) 8.00%Cocamidopropyl Betaine
Genapol® L-3 (Clariant) 1.50%Laureth-3
[H] Sodium Chloride 1.50%
[1] Mix [A] and [B].
[2] Add [C] to [1] and keepstirring until a clear solutionhas been obtained.
[3] Stir the components of [D]one after another into [2].
[4] Dissolve [E] in [F] understirring while heatingslightly and then stir into [3].
[5] Stir the components of [G]one after another into [4].
[6] If necessary adjust the pH.
[7] Finally adjust the viscositywith [H].
Antidandruff Shampoo B I / 6144clear, 13.6 % active ingredient
[1] Mix [A] and [B].
[2] Add [C] to [1] and keepstirring until a clear solutionhas been obtained.
[3] Stir the components of [D]one after another into [2].
[4] Dissolve [E] in [F] understirring while heatingslightly and then stir into [3].
[5] Stir the components of [G]one after another into [4].
[6] If necessary adjust the pH.
[7] Finally adjust the viscositywith [H].
Antidandruff Shampoo B I / 6146clear, 12.3 % active ingredient
[A] Octopirox® (Clariant) 0.50%Piroctone Olamine
[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 30.00%
Sodium Laureth Sulfate
[D] Belsil® DMC 6032 0.50%Dimethicone Copolyol Acetate
Fragrance 0.30%[E] Allantoin (Clariant) 0.30%
Allantoin
[F] Water ad 100.00%[G] Dyestuff solution q.s.
Panthenol 1.00%Genagen® CAB (Clariant) 8.00%Cocamidopropyl Betaine
Genapol® L-3 (Clariant) 1.50%Laureth-3
[H] Sodium Chloride 1.50%
> 64
http:// fun.clariant.com
> 65
Hair Cleansing Preparations
Cond
ition
ing
Sham
poo
Product name Recipe Procedure
Cond
ition
ing
Sham
poo
Product name Recipe Procedure
Hair Cleansing Preparations
[Premix]Genagen® LAA (Clariant) 30.00%Sodium Lauroamphoacetate
Genamin® PDAC (Clariant) 4.00%Polyquaternium-6
Water 66.00%[A] Genagen® LAA (Clariant) 15.00%
Sodium Lauroamphoacetate
Water ad 100.00%[B] Genagen® CAB (Clariant) 13.00%
Cocamidopropyl Betaine
Hostapon® CLG (Clariant) 12.00%Sodium Lauroyl Glutamate
Premix 10.00%[C] Citric Acid (50% in water) q.s.[D] Glucamate® DOE 120 0.75%
PEG-120 Methyl Glucose Dioleate
[E] Fragrance 0.30%Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[1] The components of the premixare mixed homogeneous.
[2] Add the components of [B]one after another into [A].
[3] Adjust the pH with [C].
[4] Dissolve [D] while heatingslightly in [3].
[5] Finally add the components of [E] at room temperature.
Conditioner Shampoo B I / 6156clear, with 14% active ingredient
[A] Cocamide DEA 2.20%[B] Water 10.00%[C] Genapol® LRO liquid (Clariant) 40.00%
Sodium Laureth Sulfate
Hostapon® KCG (Clariant) 5.00%Sodium Cocoyl Glutamate
Genamin® KSL (Clariant) 2.00%PEG-5 Stearyl Ammonium Lactate
Softigen® 767 0.40%PEG-6 Caprylic/Capric Glycosides
Fragrance 0.30%Belsil® DMC 6032 1.00%Dimethicone Copolyol Acetate
Genapol® TSM (Clariant) 2.00%PEG-3 Distearate (and)Sodium Laureth Sulfate
[D] UCARE® Polymer JR 400 0.60%Polyquaternium-10
[E] Water ad 100.00%[F] Genagen® CAB (Clariant) 7.00%
Cocamidopropyl Betaine
Dyestuff solution q.s.Nipaguard® DCB (Clariant) q.s.Phenoxyethanol (and) Methyldibromoglutaronitrile
[G] Sodium Chloride 2.00%
[1] Dissolve [A] in warmed [B].
[2] One after another the compo-nents of [C] are added to [1].
[3] Dissolve [D] in warmed [E], then stir into [2].
[4] One after another the compo-nents of [F] are added into [3].
[5] If necessary adjust the pH.
[6] Finally adjust the viscositywith [G].
Conditioning Shampoo B I / 6140with a silk lustre effect,18% active ingredient
http:// fun.clariant.com
> 67
Contents
Hair Care Preparations
Hair Aftertreatment PreparationsCream Rinse B II / 1052 > 68Cream Rinse B II / 1054 > 68Cream Rinse B II /1055 > 69Cream Rinse B II / 1057 > 69Cream Rinse B II / 1058 > 69Cream Rinse B II / 1060 > 70Cream Rinse B II / 1066 > 70Cream Rinse B II / 1067 > 71Cream Rinse B II / 1090 > 71Cream Rinse B II / 1091 > 72Cream Rinse B II / 1096 > 72Cream Rinse B II / 1097 > 73Cream Rinse B II / 3000 > 73Instant Antidandruff Vitamin Hair Repair B II / 3001 > 74
Hair Conditioner SprayB II / 3004 > 75clear, liquid
Hair ConditionerB II / 2026 > 75clear
Hair TonicsAntidandruff Hair Tonic B III / 3009 > 76
Permanent WavesPermanent WaveB IV / 1000 > 76for damaged/coloured hair
Hair Styling PreparationsSetting Lotion B V / 1020 > 76for blow-dried hair
Hair Gel B V / 3001 > 77clear
Antidandruff Setting Lotion B V / 5002 > 77
> Pages > Pages
> 68
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
Hair Care Preparations
http:// fun.clariant.com
> 69
Hair Care Preparations
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
[A] Genamin® KDMP (Clariant) 2.00%Behentrimonium Chloride
Hostaphat® KL 340 D (Clariant) 1.50%Trilaureth-4 Phosphate
Cetyl Stearyl Alcohol 2.00%Mineral Oil, high viscosity 2.00%
[B] Water ad 100.00%[C] Fragrance 0.30%
Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[A] Genamin® STAC (Clariant) 2.50%Steartrimonium Chloride
Hostacerin® DGSB (Clariant) 2.00%PEG-4 Polyglyceryl-2 Stearate
Cety Alcohol 3.20%Mineral Oil, high viscosity 1.00%
[B] Water ad 100.00%[C] Fragrance 0.30%
Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[A] Genamin® DSAC (Clariant) 2.50%Distearyldimonium Chloride
Hostacerin® DGL (Clariant) 0.80%PEG-10 Polyglyceryl-2 Laurate
Cetyl Alcohol 3.20%Mineral Oil, high viscosity 1.50%
[B] Water ad 100.00%[C] Fragrance 0.30%
Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[1] Melt [A] at 75°C.
[2] Heat [B] to 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At 35°C add the components of [C] to [4].
[6] Finally adjust the pH with [D].
[1] Melt [A] at approx. 75°C.
[2] Heat [B] to approx. 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At approx. 35°C add thecomponents of [C] to [4].
[6] Finally adjust the pH with [D].
[1] Melt [A] at approx. 75°C.
[2] Heat [B] to approx. 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At approx. 35°C add thecomponents of [C] to [4].
[6] Finally adjust the pH with [D].
Cream Rinse B II / 1055
Cream Rinse B II / 1057
Cream Rinse B II / 1058
[A] Genamin® DSAC (Clariant) 1.50%Distearyldimonium Chloride
Hostacerin® DGSB (Clariant) 1.50%PEG-4 Polyglyceryl-2 Stearate
Cetyl Alcohol 2.00%Mineral Oil, high viscosity 1.00%
[B] Genamin® CTAC (Clariant) 2.00%Cetrimonium Chloride
Water ad 100.00%[C] Fragrance 0.30%
Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[A] Genamin® KDMP (Clariant) 2.50%Behentrimonium Chloride
Hostaphat® KL 340 D (Clariant) 1.50%Trilaureth-4 Phosphate
Cetyl Stearyl Alcohol 3.00%Mineral Oil, high viscosity 1.00%
[B] Water ad 100.00%Genamin® KSL (Clariant) 2.50%PEG-5 Stearyl Ammonium Lactate
[C] Fragrance 0.30%Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[1] Melt [A] at approx. 75°C.
[2] Heat [B] to approx. 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At approx. 35°C add thecomponents of [C] to [4].
[6] Finally adjust the pH with [D].
[1] Melt [A] at 75°C.
[2] Heat [B] to 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At 35°C add thecomponents of [C] to [4].
[6] Finally adjust the pH with [D].
Cream Rinse B II / 1052
Cream Rinse B II / 1054
> 70
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
Hair Care Preparations
http:// fun.clariant.com
> 71
Hair Care Preparations
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
[A] Genamin® STAC (Clariant) 3.50%Steartrimonium Chloride
Hostacerin® T-3 (Clariant) 1.50%Ceteareth-3
Mineral Oil, low viscosity 1.00%[B] Tylose® H 100 000 YP2 (Clariant) 1.50%
Hydroxyethylcellulose
[C] Water ad 100.00%[D] Fragrance 0.50%
Dyestuff solution q.s.Genapol® PDC (Clariant) 4.00%Glycol Distearate (and) Laureth-4 (and) Cocamidopropyl Betaine (and) Mica (and) Titanium Dioxide
Preservative q.s.[E] Citric Acid a pH 4.0 q.s.
[1] Heat the components of [A] to about 75°C.
[2] Dissolve [B] well in [C] and heat to about 75°C.
[3] Add [2] to [1] while stirring.
[4] Cool down under stirring.At about 30°C add thecomponents of [D] one afteranother into [3].
[5] Finally adjust the pH with [E].
Cream Rinse B II / 1090with a pearl lustre effect
[A] Genamin® STAC (Clariant) 1.50%Steartrimonium Chloride
Genamin® CTAC (Clariant) 1.00%Cetrimonium Chloride
Hostacerin® DGSB (Clariant) 1.20%PEG-4 Polyglyceryl-2 Stearate
Cetyl Alcohol 2.50%[B] Tylose® H 10000 G4 (Clariant) 0.50%
Hydroxyethylcellulose
[C] Water ad 100.00%[D] Fragrance 0.30%
Panthenol 0.30%Calendula Officinalis Flower Extract 0.50%Preservative q.s.Dyestuff solution q.s.
[E] Citric Acid a pH 4.0 q.s.
[1] Melt [A] at 75°C.
[2] Stir [B] into [C], heat it to 75°C.
[3] Add [2] under stirring to [1].Stir until cool.
[4] At 40°C add the componentsof [D].
[5] Adjust the pH with [E].
Cream Rinse B II / 1066
[A] Genamin® CTAC (Clariant) 6.00%Cetrimonium Chloride
Hostaphat® KML (Clariant) 1.20%Laureth-4 Phosphate (and)Polyglyceryl-2 Sesquiisostearate
Cetearyl Alcohol 3.00%Mineral Oil 1.00%
[B] Water ad 100.00%[C] Fragrance 0.30%
Panthenol 0.30%Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.Preservative q.s.
[1] Melt [A] at 75°C.
[2] Heat [B] to 75°C.
[3] Add [2] under stirring to [1].Stir until cool.
[4] At 40°C add the componentsof [C].
[5] Adjust the pH with [D].
Cream Rinse B II / 1067[A] Genamin® KDMP (Clariant) 1.50%Behentrimonium Chloride
Genapol® L-3 (Clariant) 2.00%Laureth-3
Cetyl Alcohol 2.50%Jojoba Oil 1.00%
[B] Water ad 100.00%[C] Fragrance 0.30%
Preservative q.s.Dyestuff solution q.s.
[D] Citric Acid a pH 4.0 q.s.
[1] Melt [A] at approx. 75°C.
[2] Heat B to approx. 75°C.
[3] Stir [2] into [1].
[4] Stir until cool.
[5] At approx. 35°C add thecomponents of [C] to [4].
[6] Finally adjust the pH with [D].
Cream Rinse B II / 1060
> 72
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
Hair Care Preparations
http:// fun.clariant.com
> 73
Hair Care Preparations
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
[A] Genamin® CTAC (Clariant) 10.00%Cetrimonium Chloride
Genamin® KDMP (Clariant) 0.50%Behentrimonium Chloride
Glycerin 4.00%[B] Water ad 100.00%[C] Tylose® H 10 000 G4 (Clariant) 1.20%
Hydroxyethylcellulose
[D] Water 50.00%[E] Fragrance 0.30%
Dyestuff solution q.s.Preservative q.s.
[F] Citric Acid a pH 4.0 q.s.
[1] Dissolve [C] well in [D].
[2] Stir the components of [A]into [B]; stir until clear while heating to about 75°C.
[3] Cool [2] down to roomtemperature.
[4] Add [3] to [1] and stir until clear.
[5] Add the components of [E]one after another into [4].
[6] Finally adjust the pH with [F].
Leave on for Hairends B II / 3000clear
[A] Genamin® CTAC (Clariant) 5.00%Cetrimonium Chloride
Genamin® KDMP (Clariant) 1.00%Behentrimonium Chloride
Genaminox® CSL (Clariant) 6.00%Cocamine Oxide
[B] Water ad 100.00%[C] Tylose® H 10 000 G4 (Clariant) 1.20%
Hydroxyethylcellulose
[D] Water 50.00%[E] Fragrance 0.50%
Dyestuff solution q.s.Preservative q.s.
[F] Citric Acid a pH 4.0 q.s.
[1] Dissolve [C] well in [D].
[2] Stir the components of [A]into [B]; stir until clear whileheating to about 75°C.
[3] Cool [2] down to roomtemperature.
[4] Add [3] to [2] and stir until clear.
[5] Add the components of [E]one after another into [4].
[6] Finally adjust the pH with [F].
Cream Rinse B II / 1096clear
[A] Genamin® CTAC (Clariant) 5.00%Cetrimonium Chloride
Genamin® KDMP (Clariant) 1.00%Behentrimonium Chloride
Genaminox® CSL (Clariant) 6.00%Cocamine Oxide
[B] Water ad 100.00%[C] Tylose® H 10 000 G4 (Clariant) 1.60%
Hydroxyethylcellulose
[D] Water 50.00%[E] Fragrance 0.50%
Dyestuff solution q.s.Preservative q.s.Genapol® PDC (Clariant) 4.00%Glycol Distearate (and) Laureth-4 (and)Cocamidopropyl Betaine (and) Mica (and) Titanium Dioxide
[F] Citric Acid a pH 4.0 q.s.
[1] Dissolve [C] well in [D].
[2] Stir the components of [A]into [B]; stir until clear whileheating to about 75°C.
[3] Cool [2] down to roomtemperature.
[4] Add [3] to [2] and stir until clear.
[5] Add the components of [E]one after another into [4].
[6] Finally adjust the pH with [F].
Cream Rinse B II / 1097with a pearl lustre effect
[A] Genamin® KSL (Clariant) 7.00%PEG-5 Stearyl Ammonium Lactate
Hostaphat® KL 340 D (Clariant) 1.50%Trilaureth-4 Phosphate
[B] Tylose H 100 000 YP2 (Clariant) 1.20%Hydroxyethylcellulose
[C] Water ad 100.00%[D] Fragrance 0.50%
Dyestuff solution q.s.Genapol® PDC (Clariant) 3.00%Glycol Distearate (and) Laureth-4 (and) Cocamidopropyl Betaine (and) Mica (and)Titanium Dioxide
Preservative q.s.[E] Citric Acid a pH 4.0 q.s.
[1] Heat the components of [A]to about 75°C.
[2] Dissolve [B] well in [C] andheat to about 75°C.
[3] Add [2] to [1] while stirring.
[4] Cool down under stirring.At about 30°C add thecomponents of [D] one afteranother into [3].
[5] Finally adjust the pH with [E].
Cream Rinse B II / 1091with a pearl lustre effect
> 74
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
Hair Care Preparations
http:// fun.clariant.com
> 75
Hair Care Preparations
Hair
Afte
rtrea
tmen
t Pre
para
tions
Product name Recipe Procedure
[A] Genamin® KSL (Clariant) 5.00%PEG-5 Stearyl Ammonium Lactate
Genamin® KDMP (Clariant) 1.00%Behentrimonium Chloride
Genaminox® CSL (Clariant) 4.00%Cocamine Oxide
Cetiol® HE 2.00%PEG-7 Glyceryl Cocoate
Panthenol 0.20%[B] Water ad 100.00%[C] Fragrance 0.50%
Dyestuff solution q.s.Preservative q.s.
[D] Citric Acid a pH 4.0 q.s.
[A] Genamin® CTAC (Clariant) 5.00%Cetrimonium Chloride
Genamin® KSL (Clariant) 5.00%PEG-5 Stearyl Ammonium Lactate
Genamin® KDMP (Clariant) 1.00%Behentrimonium Chloride
Genaminox® CSL (Clariant) 6.00%Cocamine Oxide
Cetiol® HE 2.00%PEG-7 Glyceryl Cocoate
Panthenol 0.70%[B] Water ad 100.00%[C] Tylose® H 100 000 YP2 (Clariant) 1.50%
Hydroxyethylcellulose
[D] Water 50.00%[E] Fragrance 0.50%
Dyestuff solution q.s.Preservative q.s.
[F] Citric Acid a pH 4.0 q.s.
[1] Stir the components of [A]into [B]; stir until clear while heating to about 75°C.
[2] Cool [2] down to roomtemperature.
[3] Add the components of [C]one after another into [2].
[4] Finally adjust the pH with [D].
[1] Dissolve [C] well in [D].
[2] Stir the components of [A]into [B]; stir until clear whileheating to about 75°C.
[3] Cool [2] down to roomtemperature.
[4] Add [3] to [1] and stir untilclear.
[5] Add the components of [E] one after another into [4].
[6] Finally adjust the pH with [F].
Hair Conditioner Spray B II / 3004clear, liquid
Hair Conditioner B II / 2026clear
[A] Propylene Glycol 0.70%[B] Octopirox® (Clariant) 0.05%
Piroctone Olamine
[C] Carbopol 980 0.60%Carbomer
[D] Genamin KDMP (Clariant) 0.20%Behentrimonium Chloride
Genamin CTAC (Clariant) 0.50%Cetrimonium Chloride
Wheat Starch 0.50%Belsil® DMC 6032 0.80%Dimethicone Copolyol Acetate
Dow Corning® 190 0.50%Dimethicone Copolyol
[E] Water ad 100.00%Panthenol 0.20%Celquat® L 200 0.10%Polyquaternium-4
Uvinul® MS 40 0.05%Benzophenone-4
Nicotinamide 0.30%Niacinamide
Tocopheryl Acetate 0.10%Sodium Hydroxide (50% in water) 0.80%
[F] Cosmedia® Guar 0.20%Guar Hydroxypropyltrimonium Chloride
[G] Fragrance 0.30%Preservative q.s.
[1] Dissolve [B] in [A].
[2] Melt [D] at about 80°C.
[3] Stir [F] in [E] with high sheardispenser tool (Ultra Turrax).
[4] Add [1] into [3].
[5] Heat [4] to about 80°C.
[6] Add [C] to [2] and add [5] directly.
[7] Stir until cool.
[8] Add the components of [G]at about 35°C.
Instant Antidandruff Vitamin Hair Repair (Leave on) B II / 3001
> 76
Hair
Toni
csPe
rman
ent W
aves
Hair
Styl
ing
Prep
arat
ions
Product name Recipe Procedure
Hair Care Preparations
http:// fun.clariant.com
> 77
Hair Care Preparations
Hair
Styl
ing
Prep
arat
ions
Product name Recipe Procedure
[A] Octopirox® (Clariant) 0.08%Piroctone Olamine
Alcohol denat. 30.00%[B] Water ad 100.00%[C] Luviskol® VA 641 2.00%
PVP/VA Copolymer (and) Isopropyl Alcohol
[D] Genapol® C 100 (Clariant) 0.40%Coceth-10
Fragrance 0.20%[E] Dyestuff solution q.s.
Preservative q.s.[F] Aristoflex® AVC (Clariant) 1.00%
Ammonium Acryloyldimethyltaurate/VP Copolymer
[G] Citric Acid (50% in water) q.s.
[A] Octopirox® (Clariant) 0.10%Piroctone Olamine
Luviskol® VA 641 5.50%PVP/VA Copolymer (and) Isopropyl Alcohol
Genamin® KSL (Clariant) 1.00%PEG-5 Stearyl Ammonium Lactate
Polyglycol 400 (Clariant) 0.50%PEG-8
Iso-Adipate 0.60%Diisopropyl Adipate
Fragrance 0.30%[B] Isopropyl Alcohol 35.00%
Water ad 100.00%Preservative q.s.
[1] Dissolve the components of [A].
[2] Mix the components of [D].
[3] Add [1] to [2] and stir.
[4] Add [C] to [3].
[5] Dissolve [F] in [B] while stirring.
[6] Add [4] to [5] while stirring.
[7] Add the components of [E] to [6] .
[8] If nessecary adjust the pH with [G].
[1] Dissolve the componentsof [A] one after another in [B].
Hair Gel B V / 3001clear, with Octopirox
Antidandruff Setting LotionB V / 5002
[A] Octopirox® (Clariant) 0.10%Piroctone Olamine
[B] Alcohol denat. 35.00%[C] Fragrance 0.30%
Emulsogen® HCP 049 (Clariant) 0.60%PEG-40 Hydrogenated Castor Oil (and)Propylene Glycol (and) Water
[D] Water ad 100.00%Gemanin® KSL (Clariant) 0.30%PEG-5 Stearyl Ammonium Lactate
Panthenol 0.50%[E] Citric Acid a pH 4.0 q.s.
[A] Water ad 100.00%[B] Ammonia (25%) 8.20%
Thioglycolic Acid (80%) 10.00%Ammonium Hydrogen Carbonate 1.50%Gemanin® PDAC (Clariant) 1.50%Polyquaternium-6
[C] Fragrance 0.40%Emulsogen® HCP 049 (Clariant) 0.40%PEG-40 Hydrogenated Castor Oil (and) Propylene Glycol (and) Water
Sandopan® LS 24 N (Clariant) 0.40%Sodium Laureth-13-Carboxylate
[D] Antara® 430 Styrene/VP Copolymer 0.20%
[A] Aristoflex® A 60 (Clariant) 1.50%VA/Crotonates Copolymer (and) Isopropyl Alcohol
Genamin® KSL (Clariant) 1.00%PEG-5 Stearyl Ammonium Lactate
Polyglycol 400 (Clariant) PEG-8 0.20%Iso-Adipate Diisopropyl Adipate 0.20%Fragrance 0.20%
[B] Isopropyl Alcohol 45.00%Water ad 100.00%Preservative q.s.
[1] Dissolve [A] in [B].
[2] Stir [1] in the mixture of [C].
[3] The mixture of [D] stir into [2].
[4] Finally adjust the pH with [E].
[1] Add the components of [B]one after another to [A] whilestirring.
[2] Mix the components of [C]and add to [1].
[3] Add [D] to [2].
[1] Dissolve the componentsof [A] one after another in [B].
Antidandruff Hair Tonic B III / 3009
Permanent Wave B IV / 1000for damaged/coloured hair,pH-value 8.4
Setting Lotion B V / 1020for blow-dried hair
http:// fun.clariant.com
> 79
Contents
Special Protection Agents
AntiperspirantsAntiperspirant AVII / 2008 > 80roll-on
Antiperspirant AVII / 2010 > 80pump spray
Antiperspirant AVII / 2011 > 81stick
Antiperspirant AVII / 2012 > 81stick
Foot SpraysFoot Spray AVII / 3000 > 82
Hand SanitizersHand Sanitizer A II / 1035 > 82
> Pages
> 80
Antip
ersp
irant
s
Product name Recipe Procedure
Special Protection Agents
http:// fun.clariant.com
> 81
Special Protection Agents
Antip
ersp
irant
s
Product name Recipe Procedure
[A] SilCare™ 15M50 (Clariant) 13.80%Phenyl Trimethicone
Cetearyl Alcohol 19.30%Cetiol CC 13.80%Dicaprylyl Carbonate
Stearic Acid 3.50%Emulsogen® HCO 040 (Clariant) 4.10%PEG-40 Hydrogenated Castor Oil
Cithrol® 4 DS 4.10%PEG-8 Distearate
Petrolatum 6.90%[B] Locron® LIC (Clariant) 34.50%
Aluminum Chlorohydrate
[A] SilCare™ 31M30 (Clariant) 15.30%Caprylyl Trimethicone
Stearyl Alcohol 36.70%Cetiol CC 22.90%Dicaprylyl Carbonate
Arlacel® 60 2.10%Sorbitan Stearate
[B] Locron® P (Clariant) 23.00%Aluminum Chlorohydrate
[1] Melt the components of [A]at about 70°C.
[2] Heat [B] to about 70°C.
[3] Stir [2] into [1].
[4] Cool down to about 50°C and fill in stick container.
[1] Melt the components of [A]at about 70°C.
[2] While stirring add [B] into [1].
[3] Cool down to about 50°C and fill in stick container.
Antiperspirant AVII / 2011stick
Antiperspirant AVII / 2012stick
[A] Locron® L (Clariant) 30.00%Aluminum Chlorohydrate
Water ad 100%Polyglycol 400 (Clariant) 3.00%PEG-8
Alcohol denat. 17.00%Dyestuff solution q.s.Preservative q.s.Fragrance 0.30%
[B] Tylose® H 4000 G4 (Clariant) 3.00%Hydroxyethlycellulose
[A] Allantoin (Clariant) 0.10%Allantoin
[B] Water ad 100.00%[C] Locron® L (Clariant) 10.00%
Aluminum Chlorohydrate
Alcohol denat. 50.00%Farnesol 0.50%Fragrance 0.30%
[1] Mix the components of [A].
[2] [B], which is added bycontinuing stirring, shouldswell until a homogenousformulation, free of lumps,obtains.
[1] Dissolve [A] in warmed [B].
[2] Add the components of[C] into [1].
Antitranspirant AVII / 2008roll-on
Antiperspirant AVII / 2010pump spray
> 82
Product name Recipe Procedure
Special Protection Agents
Foot
Spr
ays
Hand
San
itize
rs
[A] Octopirox (Clariant) 0.30%Piroctone Olamine
Menthol 0.05%[B] Alcohol denat. 55.00%[C] Propylene Glycol 5.00%
Fragrance 0.30%[D] Allantoin (Clariant) 0.10%
Allantoin
[E] Water ad 100.00%Panthenol 0.50%
[F] Citric Acid a pH 5.5 – 6.0 q.s.
[A] Aristoflex® AVC (Clariant) 0.80%Ammonium Acryloyldimethyltaurate/VP Copolymer
Isopropyl Alcohol 50.60%[B] Water ad 100.00%[C] Imwitor 312 2.00%
Glyceryl Laurate
Propylene Glycol 2.00%Glycerin 2.00%
[D] Dyestuff solution q.s.
[1] Dissolve [A] in [B].
[2] Add [C] to [1].
[3] Dissolve [D] in warmed [E],add [2].
[4] Adjust the pH with [F].
[1] Dissolve the components of [A] under stirring in [B].
[2] Add the components of [C]to [1].
[3] Add [D] to [2].
Foot Spray AVII / 3000with Octopirox®
Hand Sanitizer A II / 1035clear, with Aristoflex® AVC
Clariant GmbHFunctional Chemicals DivisionBU II Personal CareD-65840 Sulzbach/Ts.Germany
Marketing:T +49 61 96 757 78 56F +49 61 96 757 89 35
Research & Development:T +49 69 30 51 81 00F +49 69 31 84 35
http:// fun.clariant.com
Exactly your chemistry.
fuen
fwer
ken.
com