take advantage of the space around your loading doors with over … · 2020. 1. 31. ·...
TRANSCRIPT
![Page 1: Take advantage of the space around your loading doors with Over … · 2020. 1. 31. · info@steelking.com • REG. # 5 02 EPS0908 OverDockRack 10/21/08 4:11 PM Page 2 888-877-3861](https://reader033.vdocuments.mx/reader033/viewer/2022060821/609a957b71bd827eea5d9c2c/html5/thumbnails/1.jpg)
Over-DockPallet Storage
Racks
Your Solution to Empty Pallet Storage ProblemsLoading docks cluttered with loose pallets and cartons are a commonproblem for many facilities. It’s not just an aesthetic problem; it’s oneof safety and operational efficiency.
Two decades ago, Steel King recognized the problem and pioneeredthe solution: Over-Dock Pallet Storage Racks.
Steel King’s standard SK2000 or SK3000 can be designed andconfigured to fit around your loading dock doors – letting you takeadvantage of otherwise wasted space.
Great for storing:• Empty pallets• Empty cartons• Packing materials
Take advantage of thespace around yourloading doors with
OverDockRack 10/21/08 4:11 PM Page 1
www.cisco-eagle.com888-877-3861
![Page 2: Take advantage of the space around your loading doors with Over … · 2020. 1. 31. · info@steelking.com • REG. # 5 02 EPS0908 OverDockRack 10/21/08 4:11 PM Page 2 888-877-3861](https://reader033.vdocuments.mx/reader033/viewer/2022060821/609a957b71bd827eea5d9c2c/html5/thumbnails/2.jpg)
Use your loading area efficientlySteel King has designed two unique over-dock racking products to helpyou efficiently use space and reduce the chance of lift-truck impact.Two designs are offered – a single-leg, wall-tied system and aceiling-supported system with no lower legs.
Single-Leg, Wall-TiedThe single-leg, wall-tied design features an uprightframe with a special offset leg and a single, backcolumn support up to a height that will clear the door. Single-leg, wall-tiedsystems are best suited for buildingswith poured concrete walls orexposed-column buildings. The heavy-duty wall ties used to stabilize the framevary in length; beam lengths also vary to clear thedoor. Single-leg, wall-tied racking systems shouldbe used primarily for empty pallets or light loads.
One advantage of this system is that the front post, where most potential damageoccurs, is removed. The single-leg, wall-tied design is anchored to the floor withfour bolts. The rack system needs to be secured with heavy-duty wall ties. Eachwall tie is bolted to the rack column and anchored to the concrete wall or exposedbuilding column.
Rack Construction• Structural channel load beams with
bolted connections• Two bolt-in pallet supports under
each pallet position• Safety netting or bolt-in steel
retaining straps used at the back ofeach rack bay to positively retainpallets
Optional Accessories• Post protection with the Steel Guard
system (recommended for single legracks)
• Column Core adds five times thestrength to columns
• Guard Dawg safety rail system
Your local Steel King representative,along with our engineering department,would be pleased to develop a designspecifically for your facility.
2700 Chamber St., Stevens Point, WI 54481(715) 341-3120 • (800) 826-0203
Fax: (715) 341-8792
[email protected] • www.steelking.comREG. #5020
EPS0908
OverDockRack 10/21/08 4:11 PM Page 2
www.cisco-eagle.com888-877-3861