tabulated data fr appendix

8/17/2019 Tabulated Data FR Appendix

http://slidepdf.com/reader/full/tabulated-data-fr-appendix 1/27

Details of tables:

Table B1: Has physical properties of several compounds, with information such as, normal

boiling point (at 1 atm.), heat of vaporization at normal boiling point, heat of fusion, critical

temperature and pressure, etc. Useful for chapters 5 to 8.

Table B2: Has heat capacity (at constant pressure) formula and constant values for several

compounds in different phases, solid, liquid, and gas. Useful for calculating enthalpy

change with temperature change in problems starting from Chapter 8.

Table B3: Has vapour pressure data for water at various temperatures. Useful in several

material balance problems, avoiding the need for using equations.

Table B4: Has Antoine equation (Useful for estimating vapour pressure for any compound)

constants for several compounds.

Tables B5: Gives specific volume, specific internal energy, and specific enthalpy values for

saturated steam (falling on the V-L eqlb. Curve) at various temperatures.


saturated steam (falling on the V-L eqlb. Curve) at various pressures and is a more

exhaustive table compared to Table B5.


superheated steam (falling outside the V-L eqlb. Curve) at various temperatures and

pressures. The data in the box corresponds to liquid water.

Tables B5 – B7 are useful to do energy balance problems involving steam/water (Chapter 7),

without the need to use equations and methods learned in chapter 8 for enthalpy change

calculations. The reference state for all the three tables is liquid water at its triple point.

Tables B8 and B9: Give enthalpy data for selected gases (ideal) at various temperatures.

These tables avoid the need to use equations and methods learned in chapter 8 for

enthalpy change calculations, just for these gases.

Table B10: Gives heat capacities of elemental species in solid and liquid state. Useful to

estimate heat capacity of compounds using their chemical formulae (Kopp’s rule).

Table B11: Gives heats of solution/mixing for HCl in water, NaOH in water, and H2SO4 in

water at 25OC. Useful to obtain enthalpies of the above solutions/mixtures at 25

OC and

various concentrations.

tabulated data fr appendix

Documents