table of contents - scientific.net · the effect of mn and si on the properties of advanced high...
TRANSCRIPT
Table of Contents
Committees
Preface and Overview
Symposium A: Advanced Steels and ProcessingCharacterization of Substructure Evolution in Ferrous Lenticular MartensiteA. Shibata, S. Morito, T. Furuhara and T. Maki 1
Crystallography of Ferrite Nucleation at Austenite Grain Boundary in a Low Carbon SteelT. Furuhara, H. Saito, G. Miyamoto and T. Maki 7
Review on the Hall-Petch Relation in Ferritic SteelS. Takaki 11
Continuous Casting of Advanced Steels of Near-Peritectic CompositionR.J. Dippenaar 17
Towards Radiation Tolerant Nanostructured Ferritic AlloysM.K. Miller, D.T. Hoelzer and K.F. Russell 23
Application of Quenching and Partitioning to Improve Ductility of Ultrahigh Strength LowAlloy SteelW.Q. Cao, C.Y. Wang, J. Shi and H. Dong 29
Microstructural Evolution during the Novel Quenching and Partitioning (Q&P) HeatTreatment of SteelT.D. Bigg and D.V. Edmonds 33
Study of a Novel Ultra-High Strength Steel with Adequate Ductility and Toughness byQuenching-Partitioning-Tempering ProcessY. Wang, S. Zhou, Z.H. Guo and Y.H. Rong 37
Advanced Steel Design by Multi-Scale ModelingB.C. De Cooman, H.K.D.H. Bhadeshia and F. Barlat 41
A Systematic Study on Iron Carbides from First-PrinciplesI.G. Kim, G. Rahman, J.H. Jang, Y.Y. Song, S.W. Seo, H.K.D.H. Bhadeshia, A.J. Freeman andG.B. Olson 47
The Effect of Inclusions on Mechanical Behaviour in Ultra-High Strength Alloy SteelsX.S. Xie and Y.P. Zeng 51
The Development of Mn-Series Air-Cooled and Water-Quenched Bainitic Steels in ChinaH.S. Fang, G.H. Gao, Y.K. Zheng, Z.G. Yang and B.Z. Bai 57
Effect of Nb Content on Hot Flow Stress, Dynamic Recrystallization and StrainAccumulation Behaviors in Low Carbon Bainitic SteelC.L. Miao, G.D. Zhang and C.J. Shang 62
The Study on the Precipitation and Mechanical Properties of Steel with CopperC. Li, X.M. Wang, X.L. He, C.J. Shang and Y. He 66
Topology of Spheroidized PearliteY. Adachi and Y.T. Wang 70
Evolution of Different Recrystallization Textures in Steels Having {111}<112> RollingTextureS.J. Kim, H.N. Han and D.N. Lee 74
Effect of Austenite on Drawing Limit of Ferrite-Austenite Dual Phase WireS.H. Lee and H.C. Lee 78
Application of Quenching-Partitioning-Tempering Process in Hot Rolled Plate FabricationS. Zhou, Y. Wang, N.L. Chen, Y.H. Rong and J.F. Gu 82
Microstructural Evolution of Medium Carbon Steels during the Quenching andPartitioning ProcessH.Y. Li and X.J. Jin 86
Characterization of Microstructure and Mechanical Properties of a Nb-Microalloyed Steelafter Quenching-Partitioning-Tempering ProcessX.D. Wang, Z.H. Guo and Y.H. Rong 90
PRICM7PRICM7PRICM7PRICM7ISBN(softcover): 978-0-87849-255-8 ISBN(eBook): 978-3-03813-330-8
The Effect of Mn and Si on the Properties of Advanced High Strength Steels Processed byQuenching and PartitioningB. Mašek, H. Jirková, D. Hauserová, L. Kučerová and D. Klauberová 94
The Isothermal Transformation of Low-Alloy Low-C CMnSi Steels below MSD.H. Kim, J.G. Speer and B.C. De Cooman 98
Nano-Scale Analysis of Nano-Bainite Formed in Advanced High Strength SteelsI.B. Timokhina, H. Beladi, X.Y. Xiong, E.V. Pereloma and P.D. Hodgson 102
Nitriding of a Nb-Microalloyed Thin Strip Cast Steel at 525oCK.Y. Xie, C. Zhu, J.M. Cairney, S.P. Ringer, C.R. Killmore, F.J. Barbaro and J.G. Williams 106
An Investigation on Precipitation Behaviour of Cu-Rich Phase in Super304H Heat-ResistantSteel by Three Dimensional Atom ProbeC.Y. Chi, J.X. Dong, W.Q. Liu and X.S. Xie 110
Study on Carbonitride Precipitating Process in Nb-V Micro-Alloyed SteelW.Q. Liu, X.Y. Zhu, X.J. Wang and X.Y. Xiong 114
650°C Long-Term Structure Stability Study on 18Cr-9Ni-3CuNbN Heat-Resistant SteelH.Y. Yu, J.X. Dong and X.S. Xie 118
In Situ TEM and APT Analysis on the Dislocations Associated with Solute Carbons inStrain-Aged Low Carbon Pipeline SteelsH.S. Park, J.S. Kang, J.Y. Yoo and C.G. Park 122
In Situ Observation of Microstructure Evolution in Low Carbon Bainite Steels IsothermallyHeld Below A1 TemperatureR. Zhang, S.W. Yang, C. Sun and X.L. He 126
Isothermal Martensitic Transformation in a Sensitized SUS304 Stainless Steel underMagnetic FieldJ.Y. Choi, T. Fukuda and T. Kakeshita 130
Microstructural Observation on Materials of the Japanese Sword under Fold-ForgingProcessG. Takami, T. Ohba, S. Morito and A.K. Das 134
Evidence of Lath Martensite in High-C Japanese Sword Produced from Tamahagane Steelby Tatara ProcessA.K. Das, T. Ohba, S. Morito and M. Yaso 138
Colored Metallography Study of Bainite Steel Used for High Speed Railway CrossingF.C. Zhang, B. Han, B. Lv and T.S. Wang 142
Relationship between Particle Size and Martensitic Transformation in an Fe-30at%Ni AlloyJ.M. Nam, T. Terai, M. Mino, Y. Aikawa and T. Kakeshita 146
Spheroidization Behavior of Cementite in a High Carbon SteelT.K. Ha, C.H. Lee and K.S. Kim 150
Influence of Silicon on the Spheroidization of Cementite in Hypereutectoid Bearing SteelsK.H. Kim, J.S. Lee and D.L. Lee 154
Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic SteelsContaining Ni and CuB.C. Hwang, T.H. Lee, S.J. Park, C.S. Oh and S.J. Kim 158
Role of Microstructure in Susceptibility of X70 Pipeline Steel to Hydrogen EmbrittlementD. Hejazi, A.J. Haq, N. Yazdipour, D.P. Dunne, F.J. Barbaro and E.V. Pereloma 162
Microstructure and Tensile Properties of ODS Ferritic Steels Produced by MechanicalAlloying in Argon and Hydrogen Gas EnvironmentsN.Y. Iwata, R. Kasada, A. Kimura, T. Okuda, M. Inoue, F. Abe, S. Ukai, S. Ohnuki and T.Fujisawa 166
Effect of Grain Boundary Serration on the Tensile Properties of the Super 304H HeatResistant Austenitic Stainless SteelS.M. Hong, D.J. Min and E. Fleury 170
Tensile Deformation Behavior of Tempered Martensitic Steels Produced in CGL LinesT.J. Song, J.H. Kwak and B.C. De Cooman 174
Scale-Bridging Analysis of Stress Partitioning in High Nitrogen SteelM. Ojima, Y. Adachi and Y. Tomota 178
Effect of Niobium Content on Laminar Precipitate and High Temperature MechanicalProperties of 21-2N Valve SteelS.C. Cheng, Z.D. Liu, Z.J. Lin and H.S. Bao 182
b PRICM7
Effect of Copper Sulfide on the Fatigue Properties of Bake Hardening SteelsI.D. Choi, S.G. Kang, J.H. Jang, S.B. Lee and M.H. Hong 186
Stress Dependence of Microstructural Evolution in Heat Resistant SteelsY. Murata, Y. Saoto, Y. Tsukada, T. Koyama, M. Morinaga, Y. Sasaki and Y. Hasegawa 190
The Effect of Temperature on the Tensile Properties of Steel 0Cr18Ni9W.F. Li, W. Niu, Z.M. Hao and M.H. Li 194
Recent Product Developments with Ultra-Thin Cast Strip Products Produced by theCASTRIP® ProcessC.R. Killmore, D.G. Edelman, K.R. Carpenter, H.R. Kaul, J.G. Williams, P.C. Campbell andW.N. Blejde 198
Research and Production Practice of DR Material in BaosteelX.J. Li and Y.P. Chen 202
Analysis of Advanced Strip Shape during Cold Rolling of Thin StripZ.Y. Jiang, X.Z. Du, Y.B. Du, D.B. Wei and X.F. He 206
A Pilot Rolling Mill Designed for High Strength SteelsZ.J. Jiao, J.P. Li and J. Sun 210
Cold Rolling and Annealing Microstructures and Textures of Low Carbon SteelsM. Almojil and P.S. Bate 214
Effects of Deformation Strains and Annealing Temperatures on Mechanical Properties ofMartensitic SteelsJ.C. Lee, U.G. Kang, C.S. Oh, S.J. Kim and W.J. Nam 218
Analysis of Edge Crack of Thin Strip during Cold RollingH.B. Xie, Z.Y. Jiang, D.B. Wei and A.K. Tieu 222
Study on New Model of Tension Process in Continuous RollingS.B. Zheng, J.H. Ma and Z.F. Li 226
Study on the Production of Ti Micro-Alloyed High Strength Hot Rolled Steel by CSPProcessG.Q. Li, A.D. Xiao, D.Z. Wen, G.H. Jiao, B.P. Zheng and J. Fu 230
Hot Ductility of High Carbon Steel Produced by CSPG. Huang, G.H. Jiao, D.Z. Wen, C.Q. Zhou and K.M. Wu 234
Ultrafine Grained High Strength Low Alloy Steel with High Strength and High DuctilityJ. Shi, W.Q. Cao and H. Dong 238
Mechanical Properties of Micro-Alloyed TRIP SteelJ.H. Jung, S.G. Kim and B.C. De Cooman 242
Mechanical Properties of Hypereutectoid Steel with Microduplex (α+θ) Structure Formedby Hot Deformation of Undercooled AusteniteL.F. Li, W. Chen, W.Y. Yang and Z.Q. Sun 246
Hot-Rolled TRIP Steels Based on Dynamic Transformation of Undercooled AusteniteW.Y. Yang, L.F. Li, Y.Y. Yin, Z.Q. Sun and X.T. Wang 250
Effect of Thermomechanical Processing Parameters on the Microstructure Development inLow Si TRIP SteelF. Al Harbi and E.V. Pereloma 254
Selective Oxidation and Sub-Surface Phase Transformation during Austenitic Annealing ofTWIP SteelsY.F. Gong, H.S. Kim, S.K. Kim and B.C. De Cooman 258
Effect of N on Microstructure and Tensile Behavior of TWIP SteelS.W. Lee, J.K. Kim, S.K. Kim, K.G. Chin and B.C. De Cooman 262
Hot-Working Behaviour of Advanced High-Manganese C-Mn-Si-Al SteelsL.A. Dobrzański and W. Borek 266
Constitutive Modeling of TWIP Steel in Uni-Axial TensionJ.K. Kim, Y. Estrin, H. Beladi, S.K. Kim, K.G. Chin and B.C. De Cooman 270
Development of a Robust TRIP800 Concept for GI/GA Automotive ApplicationsY.Y. Lee, J.H. Kwak, J.S. Kim and B.C. De Cooman 274
On the Stretch-Flangeability of High Mn TWIP SteelsL. Chen, J.K. Kim, S.K. Kim, K.G. Chin and B.C. De Cooman 278
Processing, Properties and Microstructure of a 1.2%Al TRIP SteelD.L. Liu, J. Zhang and Z.Y. Li 282
Materials Science Forum Vols. 654-656 c
Ultra Fine-Grained 6wt% Manganese TRIP SteelS.W. Lee, K.Y. Lee and B.C. De Cooman 286
Effect of Heat Treatment on Microstructure and Mechanical Properties of Low-CarbonTRIP Steel TubeZ.C. Zhang, F.X. Zhu, H.S. Di, Y.M. Li and K. Manabe 290
Grain Size Dependence of the Flow Stress of TWIP SteelG. Dini, R. Ueji and A. Najafizadeh 294
Effects of Processing Parameters on Microstructure Development in X70 Pipeline SteelA. Al Shahrani, T. Schambron, A. Dehghan-Manshadi, J.G. Williams and E.V. Pereloma 298
Influence of Phosphorous and Boron on the Recrystallization, Grain Growth andMechanical Properties of 3% Si SteelS.I. Lee and B.C. De Cooman 302
Influence of Initial Microstructure on Mechanical Properties of Cu Bearing Extra LowCarbon Steel SheetsS.K. Min, S.I. Kim, J.S. Kim and M.H. Hong 306
Hot Deformation Behavior of V-Microalloyed SteelA.C. Ren, Y. Ji, G.F. Zhou, Z.X. Yuan, B. Han, Y. Li and J. Yang 310
Influence of Strain Path Changes on Microstructure Inhomogeneity and MechanicalBehavior of Wire Drawing ProductsK. Muszka, M. Wielgus, J. Majta, K. Doniec and M. Stefanska-Kadziela 314
Effects of Alloying Elements on Mechanical Properties in Hyper-Eutectoid Steel WiresJ.W. Lee, U.G. Kang, Y.S. Lee, K.T. Park and W.J. Nam 318
Evaluation of Press Formability Using Servo Die Cushion in Deep DrawingA. Watanabe, Y. Kotani, H. Watari and T. Shimizu 322
Aluminide Coating Formation on Hot Press Forming SteelsD.W. Fan, H.S. Kim, R.B. Park and B.C. De Cooman 326
Influence of Thermal History on Microstructure and Mechanical Properties of Steels forHot StampingT. Senuma and Y. Takemoto 330
Phase Transformation and Annealing Behavior of SUS 304 Austenitic Stainless SteelDeformed by High Pressure TorsionI. Shuro, M. Umemoto, Y. Todaka and S. Yokoyama 334
Torsion Textures Simulation by Considering Rigid Body RotationY.D. Liu and Y.Q. Yang 338
Slide-Bend Forming of Very Thin Metal Sheet Using Slide-Ironing ToolR. Nakagawa, T. Matsuno, Y. Marumo, Y. Hayano, L.Q. Ruan, H. Sakamoto and H. Harada 342
A Study on Tool Wear of Sheet Metal Stamping Die Using Numerical MethodX.Z. Wang and S.H. Masood 346
Back Bead Characteristics during Butt Welding of a Thick Plate for Various BackingConditionsC.H. Kim 350
Welding Technology of Ultra-Low Carbon and Nitrogen Ferrite Stainless SteelB.S. Wang, S.C. Zhu and X.N. Ye 354
The Oxide Inclusion and Heat-Affected-Zone Toughness of Low Carbon SteelsW. Shu, X.M. Wang, S.R. Li and X.L. He 358
Preliminary Investigation into Repair of High Strength Steel Using Laser CladdingR. Mohammed, Q.C. Liu, M. Janardhana and G. Clark 362
Unconventional Short-Term Glow Discharge Nitriding of 316L Austenitic SteelT. Frączek, M. Olejnik and J. Jasiński 366
Effect of Carbon on Frictional Wear Behaviours of High Vanadium High Speed Steel underDry Sliding ConditionL.J. Xu, S.Z. Wei, Y.P. Ji, G.S. Zhang, J.W. Li and R. Long 370
Effect of Microshot Peening on Surface Characteristics of Spring SteelY. Harada and K. Yoshida 374
Mechanical Properties and Marine Corrosion Resistance of P-Bearing ULCB SteelsW.F. Cui, C.M. Liu and S.X. Zhang 378
d PRICM7
Compatibility Evaluation for Application of Lean Duplex Stainless Steels to SeawaterSystems in Nuclear Power PlantsH.Y. Chang, H.B. Park, Y.S. Kim, S.K. Ahn, K.T. Kim and Y.Y. Jang 382
Influence of Cu Contents in Hot Shortness of Cu Bearing EAF SteelsY.S. Lee, C.H. Jung, Y.H. Jiang, J.T. Im, Y.H. Lee, S.K. Chang, M.R. Kim and J.H. Jun 386
Interfacial Properties Prediction of Liquid Iron-Si Inclusion-MgO RefractoryD. Pradhan and R.G. Reddy 390
Mold Thermocouple Locations and their Impact on Prevention of Caster BreakoutsI. Sohn and A. Sinha 394
Symposium B: Advanced High Temperature Structural MaterialsMaterials Technology for PC-TPP in Green Economic EraJ.T. Kim and B.G. Kong 398
The Fabrication of Titanium Aluminide Matrix Composite Sheet by Rolling and ReactionAnnealingL. Geng, H.L. Wang, Y.B. Song and J. Zhang 404
Welding Soundness of a Thick-Walled 9Cr-1Mo SteelW.S. Ryu, S.H. Kim and D.W. Kim 408
Fundamentals of Spark-Plasma Sintering: Applications to Net-Shaping of High StrengthTemperature Resistant ComponentsE. Olevsky, E. Khaleghi, C. Garcia and W. Bradbury 412
Construction of a High Temperature Grade 91 Sodium Component Test LoopH.Y. Lee, J.H. Lee, T.H. Lee, J.H.E. Lee, T.J. Kim and Y.B. Lee 416
Mo Effect on the Microstructure in Co-Al-W-Based SuperalloysF. Xue, Z.Q. Li and Q. Feng 420
High Temperature Strength of Ir/Ir2Y Two Phase Alloys in the Ir-Pt-Y SystemN. Sekido and Y. Yamabe-Mitarai 424
Grain Refinement and Nuclei Formation Mechanism of Ni-Based Superalloy K417 withLow Voltage Pulsed Magnetic CastingY.S. Yang, X.P. Ma and Y.J. Li 428
The Effect of Ti Addition on Phase Equilibria among Ni (A1), Ni3Al (L12) and Ni3V (D022)PhasesE. Hayashi, S. Kobayashi, K. Sato, T.J. Konno, Y. Kaneno and T. Takasugi 432
Microstructural Characterization of Nb-Al Base ODS AlloysS. Ukai, A. Minami, S. Hayashi, N. Sakaguchi and S. Miura 436
Alloying Behavior of Ni3Nb, Ni3V and Ni3Ti CompoundsH. Sugimura, Y. Kaneno and T. Takasugi 440
Alloy Design of Nb-Si Based High Temperature Alloys by Phase Stability ControlS. Miura, T. Tanahashi, Y. Mishima and T. Mohri 444
The Stability of γ ’-Co3(Al,W) Phase in Co-Al-W Ternary SystemY. Tsukamoto, S. Kobayashi and T. Takasugi 448
The Effect of Alloying Elements on Microstructure and Strength Property of Dual Two-Phase Intermetallic Alloys Based on Ni3Al-Ni3V Pseudo-Binary Alloy SystemK. Kawahara, T. Moronaga, Y. Kaneno, A. Kakitsuji and T. Takasugi 452
Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In SituDiffraction ExperimentsT. Schmoelzer, S. Mayer, F. Haupt, G.A. Zickler, C. Sailer, L. Lottermoser, V. Güther, K.D. Lissand H. Clemens 456
Effect of Y on Microstructure and Mechanical Properties of a Ti AlloyZ.G. Liu, C.J. Zhang, L.H. Chai, Y.Y. Chen and K.D. Woo 460
Effects of Electropulsing Treatment on the Precipitation Behaviour of Grain BoundaryCarbides in GH3044 AlloyY. Liu, L. Wang, Y.C. Wang, H.Y. Liu, X.J. Chen and Y. Yu 464
Property Responses in Nb-Si-Hf-Ti-Al-W-B-Cr Alloys for High-Temperature ApplicationsX.X. Yang, J.B. Sha and H. Zhang 468
The Effect of Refractory Elements on Microstructure and Mechanical Properties ofNi3(Si,Ti) Intermetallic AlloysA. Kai, D. Imajo, Y. Kaneno and T. Takasugi 472
Materials Science Forum Vols. 654-656 e
Microstructure and High Temperature Strength in Fe3Al Base Alloys Containing FineCarbide ParticlesS. Kobayashi, R. Makihara and T. Takasugi 476
Microstructure and Mechanical Properties of Al Added Ni3(Si,Ti) Intermetallic Thin SheetsY. Kaneno, Y. Fujimoto and T. Takasugi 480
The Effect of Grain Size on Cutting Force in End Milling of Inconel 718CZ.L. Zhao, C.H. Ai and L. Liu 484
The Potential of HAZ Property Improvement through Control of Grain BoundaryCharacter in a Wrought Ni-Based SuperalloyH.U. Hong, I.S. Kim, B.G. Choi, H.W. Jeong, S.M. Seo, Y.S. Yoo and C.Y. Jo 488
Phase-Field Simulation on Phase Transformation during Creep Deformation in Type 304SteelY. Tsukada, A. Shiraki, Y. Murata, S. Takaya, T. Koyama and M. Morinaga 492
The Role of Interfacial Precipitates on Creep Behaviour of Power Metallurgy (PM) Ti-48Al-2Cr-2Nb+1W AlloyD.Y. Seo, S. Bulmer, H. Saari, H.L. Zhu and P. Au 496
The Effect of Heat Treatments on Microstructure and Creep Properties of PowderMetallurgy Beta Gamma Titanium Aluminide AlloysT. Sawatzky, D.Y. Seo, H. Saari, D. Laurin, D.J. Kim and Y.W. Kim 500
Creep Behaviour and Microstructural Changes of Advanced Creep Resistant Steels afterLong-Term Isothermal AgeingV. Sklenička, K. Kuchařová, M. Svoboda, A. Kroupa and J. Čmakal 504
Creep Behavior for Alloy 617 in Air at 950oCW.G. Kim, S.N. Yin, G.G. Lee and Y.W. Kim 508
Microstructure and Creep Behavior of a Single Crystal Nickel-Base Superalloy with [011]OrientationS.G. Tian, S. Zhang, L.L. Yu, H.C. Yu and B.J. Qian 512
Statistical Analysis of Creep Crack Growth Behavior in Modified 9Cr-1Mo SteelS.J. Kim, W.G. Kim, I.H. Jung and Y.W. Kim 516
Effects of Ferrite Content on the Tensile Strength and Impact Toughness of 2.25Cr-1Mo-0.25V SteelsT.K. Kim, C.H. Han, S.H. Kim, H.K. Kwon and D.J. Kim 520
Creep Crack Growth Rates on the Base and Welded Metals of Modified 9Cr-1Mo SteelW.G. Kim, J.Y. Park, S.N. Yin, Y.W. Kim and S.J. Kim 524
Evaluation of Creep-Fatigue Crack Growth for Grade 91 Steel Wide PlateH.Y. Lee, J.B. Kim and J.H. Lee 528
Fretting Wear Resistance of ATW Cr3C2/Ni3Al Composite Hardfacing on IC6SXS.S. Li, M.L. Wu, L. Sun, L.W. Jiang and Y.F. Han 532
Isothermal Oxidation Behavior of a New Directionally Solidified Ni-Base Superalloy in Airat Different TemperatureL. Wang, Y. Huang, Z. Zhao, Y. Liu, J.T. Wu and P. Yan 538
High Temperature Oxidation Behavior of Si-Mo Ferritic Ductile Cast IronK.H. Choe, S.M. Lee and K.W. Lee 542
Formation of Protective Intermediate Phase in Ta Addition TiAl during High TemperatureOxidationK. Hashimoto and K. Seita 546
Cobalt-Based Alloys for High Temperature ApplicationsR. Mahapatra, M.A. Imam, C.S. Lei and C.R. Feng 550
Study of a New Type High Strength Ni-Based Superalloy DZ468 with Good Hot CorrosionResistanceZ. Zheng, E. Liu, Y.S. Yu and Y.X. Zhu 554
Oxidation Resistance of Innovative Carbon-Based Materials Results of ExtreMatR. Moormann, H.K. Hinssen and B. Schlögl 558
Oxidation of TiAl Alloys Coated by Fluorine Resin in SO2 Containing AtmosphereA. Gil, Z. Żurek and A. Stawiarski 562
High-Temperature Sulfurization of Crofer 22APU in H2/H2S AtmosphereZ. Żurek, A. Jaron, A. Stawiarski and A. Gil 566
High Temperature Alloys from Nb-Cr-Si System with Minor AdditionsB. Portillio, D. Alvarez, A. Vazquez and S.K. Varma 570
f PRICM7
Symposium C: Light Metals and AlloysThixomolded® and Thermomechanically Processed Fine-Grained Magnesium AlloysR.F. Decker, J. Huang, S. Kulkarni and J.W. Jones 574
Development of the Microstructure and Texture of RE Containing Magnesium Alloysduring Hot RollingK.U. Kainer, J. Wendt, K. Hantzsche, J. Bohlen, S.B. Yi and D. Letzig 580
Research on High Strength and High Toughness Titanium Alloy with Damage ToleranceY.Q. Zhao and H.L. Qu 586
Precipitation Sequence in an Al-Si-Mg Foundry AlloyB. Rinderer, M. Couper, X.Y. Xiong, S.X. Gao and J.F. Nie 590
Microstructure and Joint Strength of Similar- and Dissimilar Lap Joints Fabricated bySeveral Advanced Solid-State Welding MethodsS. Kumai, M. Watanabe and K. Feng 596
Building Capability through Benchmarking and Technology TransferR.M. Hodge, S. Palanisamy and M.S. Dargusch 602
Temperature Dependence of Compressive Deformation Behavior of Mg89Zn4Y7 ExtrudedLPSO-Phase AlloysK. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda and Y.Umakoshi 607
Thermal Stability and Mechanical Properties of Extruded Mg-Zn-Y Alloys with Long-Period Stacking Order PhaseM. Noda and Y. Kawamura 611
Multimodal Microstructure Evolution in Wrought Mg-Zn-Y Alloys with High Strength andIncreased DuctilityM. Yamasaki, K. Hashimoto, K. Hagihara and Y. Kawamura 615
Preparation and Mechanical Property of Mg-Zn-Y Alloy with a Long Period Ordered PhaseT. Itoi, Y. Kuroda, Y. Kawamura and M. Hirohashi 619
Formation of a Novel X Phase in Mg–Gd–Zn–Zr AlloyY.J. Wu, L.M. Peng, X.Q. Zeng, D.L. Lin and W.J. Ding 623
TEM Observation of Precipitates in a Mg-Gd-Sc Alloy with High Content of ScT. Fujii, T. Kawabata, K. Matsuda and S. Ikeno 627
Effect of Sc Addition on Aging Behavior of Mg-Gd AlloysT. Kawabata, K. Matsuda and S. Ikeno 631
Effect of Minor Additions of Al and Si on the Mechanical Properties of Cast Mg-3Sn-2CaAlloys in Low Temperature RangeK.P. Rao, K. Suresh, N. Hort and K.U. Kainer 635
Microstructure and Tensile Properties of an Mg-5Sn-5Zn AlloyJ.X. Zhou, Y.S. Yang, S.Q. Tang and C.W. Tian 639
Microstructures and Mechanical Properties of Mg-9Zn-Zr Magnesium AlloysJ. Zhang, Q. Ma, F.S. Pan and R.L. Zuo 643
Effect of Bi Addition on Thermal Stability and Tensile Ductility of Mg-3%Zn-0.4%Zr AlloyJ.H. Jun and M.H. Lee 647
Study on Mechanical Properties and Microstructures of Mg-6Zn-2Gd-0.6Zr New Sand-Casting Magnesium AlloyG.Y. Yang, J.H. Li, W.Q. Jie and Z. Yu 651
Effects of Trace Cu Addition on the Microstructure and Tensile Properties of ZK60 AlloyH.M. Zhu, C.P. Luo, J.W. Liu, Z.W. Liu and S.P. Ringer 655
Effect of Quenching on Aging Behavior of Binary Mg-Zn AlloysR. Nakanishi, T. Kawabata, K. Matsuda and S. Ikeno 659
Effect of Casting Method and Al Contents on Microstructure in AM-Type MagnesiumAlloysK. Watanabe, K. Matsuda, T. Gonoji, T. Kawabata, K. Sakakibara, Y. Sanpei, S. Saikawa and S.Ikeno 663
Microstructural Evolution of Rheo-Diecast AZ91D Magnesium Alloy with GadoliniumAdditionJ.L. Zhang, X.T. Wang, Y. He and Y.L. Wang 667
Materials Science Forum Vols. 654-656 g
Inoculation during Metal Castings: Beyond Grain RefiningD. Qiu and M.X. Zhang 671
Aluminium-Rich Coring Structures in Mg-Al Alloys with Carbon InoculationY.D. Huang, X.H. Zheng, A. Okechukwu, G.S. Kim, K.U. Kainer and N. Hort 675
Microstructure and Aging Behavior in AM60 Magnesium Alloy Cast into Sand andPermanent MoldsH. Yamada, M. Furui, S. Ikeno, Y. Sanpei, K. Sakakibara and S. Saikawa 679
The Influence of Eutectic Morphology on the Impact Properties of High Pressure Die CastMg-Rare-Earth AlloysM. Easton, K. Strobel, S.M. Zhu, M.A. Gibson and J.F. Nie 683
Development of Heat-Resistance and Creep-Resistance Magnesium Alloy of Die-CastingMg-4Al-4La and/or CeJ. Meng, J.H. Zhang, D.P. Zhang, Z. Tian, W. Sun, H.Y. Lu and D.X. Tang 687
The Skin Effect in an Mg-RE High Pressure Die Cast AlloyK. Yang, A.V. Nagasekhar, C.H. Cáceres and M. Easton 691
Influence of Grain Boundary on Activation of Slip Systems in Magnesium: CrystalPlasticity AnalysisT. Mayama, T. Ohashi and K. Higashida 695
Deformation Behavior of Magnesium Single Crystal in c-Axis Compression and a-AxisTensionS. Ando, M. Tsushida and H. Kitahara 699
Microstructure and Mechanical Properties of Extruded Mg-Zn-Ca AlloyM.Y. Zheng, L.B. Tong, S.W. Xu, X.S. Hu, K. Wu and S. Kamado 703
Twinning-Induced Negative Strain Rate Sensitivity in Wrought Magnesium Alloy AZ31Y.B. Chun and C.H.J. Davies 707
Grain Refinement of Magnesium Alloy AZ31 under Torsion Extrusion with a Square-HoleDieS. Mizunuma, T. Iizuka, K. Mitsui, H. Okumura and M. Kohzu 711
Twinning Behavior in AZ31-B Polycrystal Texture Subjected to In-Situ Bending TestI. Sato, S. Miura and T. Mohri 715
Texture and Mechanical Properties of AZ31 Magnesium Alloy Sheets Processed bySymmetric/Asymmetric Combination Hot-RollingJ. Horiuchi, H. Inoue and T. Takasugi 719
Crystallographic Orientation Dependence of Fatigue Crack Propagation Behavior in RolledAZ31 Magnesium AlloyS. Morita, N. Ohno, F. Tamai and Y. Kawakami 723
Microstructure Evolution in AZ31 Magnesium Alloy Worked by Torsion at WarmTemperatureK. Aoyama, M. Furui and S. Ikeno 727
Deep Drawing of AM31 Magnesium AlloysJ.H. Cho, L.L. Chang and S.B. Kang 731
Grain Refinement by Combined ECAE/Extrusion and Dieless Drawing Processes for AZ31Magnesium Alloy TubesT. Furushima, T. Shimizu and K. Manabe 735
Warm Hydroforming Process with Non-Uniform Heating for AZ31 Magnesium Alloy TubeK. Manabe, T. Morishima, Y. Ogawa, K. Tada, T. Murai and H. Nakagawa 739
Sound Insulation Study on Mg Sheet and Mg Honeycomb PanelsG.F. Quan, Z.M. Liu, X. Gu and F. Yan 743
Effect of Temperature on Plastic Buckling Strength of Shot Peened Pipe of MagnesiumAlloysI. Fukuda, Y. Harada and Y. Tanaka 747
Microstructural Evolution during Friction Stir Processing of Magnesium Alloy CastingsJ.D. Robson, S. Cui and Z.W. Chen 751
Welding Interface in Magnetic Pulse Welded JointsM. Watanabe and S. Kumai 755
Microstructure of Laser Treated ZE41A-T5 Magnesium AlloyY. Durandet, S. Sun and M. Brandt 759
Surface Modification and Repair for Aircraft Life Enhancement and Structural RestorationQ.C. Liu, P. Baburamani, W. Zhuang, D. Gerrard, B. Hinton, M. Janardhana and K. Sharp 763
h PRICM7
Improvement of Corrosion Resistance of Extruded Mg-Zn-Y Mg/LPSO Two-Phase Alloysby Fourth Element AdditionS. Izumi, M. Yamasaki and Y. Kawamura 767
Mechanical Properties and Microstructure of AZ Magnesium Alloys Anodized byPhosphate ElectrolyteT. Kanadani, S. Hikino, A. Saijo, M. Hino, K. Murakami and A. Sakakibara 771
Characterization of Nickel Oxide Layers on the AZ91 Mg Alloys by Plasma ElectrolyticOxidationI.J. Hwang, K.M. Lee, B.Y. Yoo and D.H. Shin 775
The Effect of Cd Addition on NDE of As-Cast Mg-Cd Alloy in 0.1M NaCl SolutionJ.H. Dong, S.N. Xu, W. Ke and N. Chen 779
Modelling of the Metal/Mould Interactions in the DC Casting Process for Aluminium andMagnesiumA. Prasad and I.F. Bainbridge 783
Continuous Casting of Magnesium Alloy Billet Using Electromagnetic TechniquesM.G. Kim, J.H. Kim, J.P. Park, G.C. Lee and W.J. Kim 787
Thermal Analysis of a Bi-Metallic Chill Vent for High Pressure Die CastingM. Imran, R. Dhaliwal and S.H. Masood 791
In-Line Rolling of Aluminum Alloy Strip Cast by a High Speed Twin Roll CasterR. Nakamura, S. Hanada, S. Kumi and H. Watari 795
Technology of Molten Salt Electrolysis of Magnesium ChlorideM.S. Choi, C.K. Lee, G.G. Lee, S.K. Cho and J.Y. Jung 799
LCA Study of Rare Earth Metals for Magnesium Alloy ApplicationsP. Koltun and A. Tharumarajah 803
Production of Ti-6Al-4V Strip by Direct Rolling of Blended Elemental PowderG.M.D. Cantin, N.A. Stone, D. Alexander, M.A. Gibson, D. Ritchie, R. Wilson, M. Yousuff, R.Rajakumar and K. Rogers 807
Effects of Impurity Elements on Green Strength of Powder CompactsJ.B. Lim, C.J. Bettles, B.C. Muddle and N.K. Park 811
Mechanical Properties of Oxide Dispersion Strengthened Pure Titanium Produced byPowder Metallurgy MethodT. Yoshimura, T. Thrirujirapaphong, H. Imai and K. Kondoh 815
Spark Plasma Sintering of Ti-4.5Al-3V-2Fe-2Mo (SP-700)G. Kikuchi, H. Izui, Y. Takahashi and S. Fujino 819
Microstructural Evolution in Chips during Machining of Commercially Pure (Grade 2)TitaniumS.J. Sun, M. Brandt, W.Q. Song and M.S. Dargusch 823
Effect of Pore Size on Mechanical Properties of Titanium FoamsY. An, C.H. Yang, P.D. Hodgson and C.E. Wen 827
Effect of Hydrogen Content on Superplastic Forming and Diffusion Bonding in Ti600 AlloyX.L. Wang, Y.Q. Zhao, H.L. Hou and W.D. Zeng 831
Improvement in Hot Workability of Titanium Matrix Composite by ThermohydrogenTreatmentW.J. Lu, J.Q. Lu, D. Zhang and H.L. Hou 835
Study of Thermal Behavior in a Kroll Reactor for the Optimization of Ti SpongeProductionH.N. Bae, S.H. Kim, G.G. Lee, S.K. Jo and J.Y. Jung 839
The Ageing Behavior of Titanium Alloy Ti-10V-2Fe-3AlH. Al-Salihi, C.J. Bettles and B.C. Muddle 843
The Effect of Temperature on the Microstructure of a Metastable β Ti AlloyG. Wang, W.Q. Wang, Y.L. Yang, D. Kent and M.S. Dargusch 847
Effect of Aging Treatment on Microstructure and Mechanical Properties of a Two-PhaseTitanium AlloyM. Song, J.F. Lei, Y.J. Ma and Y.Y. Liu 851
Phase Constitution and Heat Treatment Behavior of Ti-7mass% Mn-Al AlloysM. Ikeda, M. Ueda, R. Matsunaga and M. Niinomi 855
Aging Response of TB-13 Titanium AlloyZ.B. Zhou, J.S. Li, H.C. Kou, Z.S. Zhu, B. Tang and H. Chang 859
Materials Science Forum Vols. 654-656 i
Recent Developments in Mechanisms and the Kinetics of Deformation Twinning inTitanium AlloysZ. Wyatt and S. Ankem 863
Electron Microscopy Study of Deformation Microstructure in Metastable β Titanium AlloyH. Xing and J. Sun 867
Influence of Heat Treatment on the Pseudoelastic Behaviour of a β Ti-25Nb-3Zr-3Mo-2SnAlloyD. Kent, G. Wang, L.H. Zheng, Z.T. Yu and M.S. Dargusch 871
Plastic Deformation Characteristics and Evaluation of Press Formability for Ti-6Al-4VSheet at Warm TemperatureJ.G. Park, N.K. Park and Y.S. Kim 875
Modelling the High Temperature Deformation of Ti-6Al-4VJ.K. Zhong, M.S. Dargusch and C.H.J. Davies 879
Study on Tensile Property and Fracture of Welded Joint of Ti-6.5Al-2Zr-1Mo-1V Alloy byHydrogen ProcessingQ. Wang, D.L. Sun, H. Yang and J. Wang 883
Assessment of Durability and Damage Tolerance of β-Annealed Ti-6Al-4VA. Shekhter, S. Barter, M. McDonald and R. Wanhill 887
Characterization of the Mechanical Behaviour of Both Fusion Zone and Base Metal ofElectron Beam Welded TA6V Titanium AlloyJ. Huez, C. Buirette, E. Andrieu, S. Perusin and S. Audion 890
3D Transient Thermal Modelling and Experimental Validation of the TemperatureDistribution during Laser Heating of Ti6Al4V AlloyJ.H.N. Yang, S.J. Sun, M. Brandt and W.Y. Yan 894
Characterisation of Cold Spray Titanium CoatingsS. Gulizia, A. Trentin, S. Vezzù, S. Rech, P. King, M.Z. Jahedi and M. Guagliano 898
Drawability of Ti-6Al-4V Sheet at Elevated TemperaturesN.K. Park, J.G. Park, S.H. Seo and J.H. Kim 902
Screw Form Rolling of Beta Type Titanium Alloy Preliminary Worked by TorsionK. Kume, M. Furui, S. Ikeno, Y. Ishisaka and M. Yamamoto 906
Microstructural Characteristics of Electron Beam Processed Al-2ScD. Tomus, M. Qian, P. Yu, C.A. Brice, C.J. Bettles and B.C. Muddle 910
Quantitative Analysis of Precipitate Compositions in an Al-Li-Mg-Cu Alloy Using AtomProbe TomographyX.Y. Xiong, S. Moutsos, R. King and B.C. Muddle 914
Effect of Pre-Ageing on the Artificial Ageing Response of Al-Mg-Si(-Cu) AlloysL.F. Cao, P.A. Rometsch, H. Zhong and B.C. Muddle 918
Effect of Applied Stress on Nucleation and Growth of Precipitates in a Cu-Be-Co AlloyR. Monzen, T. Terazawa and C. Watanabe 922
Dispersoid Phases in 6xxx Series Aluminium AlloysK. Strobel, E. Sweet, M. Easton, J.F. Nie and M. Couper 926
TEM Observation of Metastable Phases in Aged Al-Mg-Ge AlloysK. Matsuda, J. Nakamura, K. Yamamoto, T. Kawabata, Y. Uetani and S. Ikeno 930
Influence of Solution Treatment on Microstructure and Quench Cracking in a Water-Quenched Aluminium Alloy 7150D.K. Xu, P.A. Rometsch, H. Chen and B.C. Muddle 934
Low-Cycle Fatigue Behavior of an Al-Mg-Si Alloy with and without a Small Addition of ScC. Watanabe and R. Monzen 938
Solute Segregation at Σ11(113)[110] Grain Boundary and Effect of the Segregation onGrain Boundary Cohesion in Aluminum from First PrinciplesT. Uesugi and K. Higashi 942
Understanding the Directional Dependence of Intergranular Corrosion in AluminiumAlloysS.P. Knight, G. Clark, A.J. Davenport and A.R. Trueman 946
Experimental Investigation of the Dynamic Behavior of Aluminum FoamsS.Q. Xu, D. Ruan, J.H. Beynon and G.X. Lu 950
Alloy Design for Enhancing the Fracture Resistance of Heat Treated High Pressure Die-CastingsR.N. Lumley, M. Gershenzon and D.R. Gunasegaram 954
j PRICM7
Refinement of TiB2 in Al-Ti-B Grain Refiner Alloys by Ultrasound and the Effect on AlGrain SizeD. Shu, B.D. Sun, J.W. Mi and P.S. Grant 958
Microstructural Evolution in Various Regions of Stir Zone during Friction Stir Processingof Al-7Si-0.3Mg Cast AlloyZ.W. Chen, S. Cui, W. Gao and T.P. Zhu 962
Application of Laser Remote Welding to an Aluminum Automotive PartC.H. Kim, W.H. Choi and K.Y. Park 966
Joint Interface Morphology of Friction Stir Spot Welded Aluminum Alloy Sheets andPlated Steel SheetsK. Feng, M. Watanabe and S. Kumai 970
Morphological Variation of Fe/Cr-Rich Intermetallic Phase in Recycled Al-Si Alloy as aFunction of Solidification Rate: Time-Resolved RadiographyB.H. Kim, S.M. Lee and H. Yasuda 974
Roll Casting of Al-SiCp StripR. Nakamura, T. Nakamura, S. Kumi and H. Watari 978
Effect of Electromagnetic Field on Horizontal Direct Chill Casting of 7075 Aluminum AlloyQ.F. Zhu, Z.H. Zhao, X.J. Wang and J.Z. Cui 982
The Microstructure Characteristics and Wear Resistance of Rapidly SolidifiedHypereutectic Al-Si AlloysJ.W. Li, A.Q. Wang, J.P. Xie, W.Y. Wang and L.L. Li 986
Untrasonic-Assisted Fabrication of SiC Nanoparticles Reinforced Aluminum MatrixCompositesW.Z. Li, S.Y. Liu, Q.Y. Zhang and X. Zhu 990
Solidification Structure and Sound Absorbability of A356 Alloy FoamsY.X. Li, W.W. Yuan and X. Chen 994
Effect of Rapid Solidification Processing on Hydrogen Behaviour in AluminiumI.I. Tashlykova-Bushkevich, T. Shikagawa, V.G. Shepelevich and G. Itoh 998
Microstructure and Corrosion Behavior in Al-Mg Based Alloys Subjected to ContinuousCyclic Bending and AnnealingY. Takayama, Y. Kido, H. Kato and H. Watanabe 1002
Dynamic Deformation of Submicrocrystalline Aluminum AlloysY.G. Ko, Y.G. Kim, S. Namgung, D.H. Shin and S.H. Lee 1006
Effect of Zr Addition on Microstructure and Warm Formability of Al-Mg Sheet AlloysH.L. Zhu and M.S. Dargusch 1010
Adiabatic Shear Banding in an Al-Mg-Si Alloy Processed by Equal Channel AngularPressingM. Vaseghi, A.K. Taheri, J.H. Yoo, S.H. Joo and H.S. Kim 1014
Texture Distribution through Thickness in 6xxx Aluminum Alloy Sheet Fabricated byCross-Roll Rolling MethodK.J. Lee, J.Y. Jeon and K.D. Woo 1018
Assessing of Bendability of Aluminum Alloy Sheets for AutobodiesK. Masuda, G. Itoh and N. Itoh 1022
Durability of Aluminum Alloy/Rubber Joints in Corrosive EnvironmentM. Mori, N.L. The, G. Itoh, N. Itoh and Y. Shimada 1026
Structure of Porous Copper Fabricated by Unidirectional Solidification under PressurizedHydrogenH. Du, J.Z. Qi, J.X. Wu, S.Q. Du and T.Y. Xiong 1030
Structural Behavior of FRP Lighting Pole SystemS.H. Kim, G.N. Kim, S.J. Hong, C.W. Kim, W.S. Jang and S.J. Yoon 1034
Symposium D: Bulk Metallic Glasses and NanomaterialsLocal Atomic Arrangements of Pd-Based Bulk Metallic Glasses of the Metal-Metalloid TypeDemonstrated by Molecular Dynamics SimulationsA. Takeuchi and A. Inoue 1038
High Glass-Forming Ability and Unusual Deformation Behavior of New Zr-Cu-Fe-Al BulkMetallic GlassesQ.S. Zhang, W. Zhang, D.V. Louzguine-Luzgin and A. Inoue 1042
Materials Science Forum Vols. 654-656 k
Viscous Flow Behaviour of Supercooled Liquids and Mechanical Properties in Zr-Cu-Ni-AlBulk Metallic GlassesT. Yamasaki, M. Yamada, T. Mori, T. Kikuchi, Y. Yokoyama, A. Inoue and D.H. Kim 1046
Effect of Residual Stress on Mechanical Property of Monolithic Bulk Metallic GlassM.H. Lee, J.H. Jun and J. Eckert 1050
Microstructural Assessment of the Oxidation Behavior of Cu-Based Metallic Glass PowderM. Yan, X.P. Li, P. Yu, G.B. Schaffer and M. Qian 1054
Mechanical Properties and Structures of High Entropy Alloys and Bulk Metallic GlassesCompositesY. Zhang 1058
Bulk Metallic Glass Formation, Crystallization, and Magnetic Properties of RE4Fe72B22M2AlloysX.H. Cui, Z.W. Liu and D.C. Zeng 1062
Characteristics of Ti-Ni-Zr Thin Film Metallic Glasses Exhibiting a Shape Memory Effectafter CrystallizationJ. Sakurai, Y. Aono, Y. Ishida and S. Hata 1066
Relaxation Behavior of Zr-Cu-Al Ternary Bulk Glassy Alloy Studied by Using PositronAnnihilation TechniquesA. Ishii, S. Mineno, A. Iwase, Y. Yokoyama, T.J. Konno and F. Hori 1070
Influence of Solidification Speed on Quality and Quantity of Structural Defects inFe61Co10Zr2.5Hf2.5Y2W2B20 Amorphous AlloyM. Nabiałek, M. Dośpiał, M. Szota and P. Pietrusiewicz 1074
Amorphous Magnesium Sheet Produced by Twin Roll CastingD.R. East, M. Kellam, M.A. Gibson, A. Seeber, D. Liang and J.F. Nie 1078
Devitrification Studies of Mg60Cu29Gd11 Bulk Metallic GlasD.R. East, M.H. Reid, M.A. Gibson, R.J. Dippenaar and R.G. O'Donnell 1082
Consolidation Behavior of Cu-Zr-Al Metallic Glass Powder by Spark Plasma SinteringG.Q. Xie, D.V. Louzguine-Luzgin, M. Fukuhara, H. Kimura and A. Inoue 1086
Formation of Amorphous Fe-Cr-P-C Alloy Coating Films by a Newly Developed ThermalSpraying TechniqueM. Komaki, T. Mimura, Y. Kusumoto, R. Kurahasi, M. Kouzaki and T. Yamasaki 1090
Low Temperature Synthesis of Silicon Nanocrystals Fabricated by PECVD and theirOptical PropertyD.H. Jang, G.H. Gu and C.G. Park 1094
FePBNbCr Soft Magnetic Glassy Alloys “SENNTIX” with Low Loss Characteristics forCommercial Inductor CoresH. Matsumoto, A. Urata, Y. Yamada and A. Inoue 1098
High Bs FeSiBPCu Nanocrystalline Wide Ribbons Using Industrial Raw MaterialsA. Urata, H. Matsumoto, S. Yoshida and A. Makino 1102
Effect of Nitridation Magnetic Properties of Nanocrystalline Fe-Co Alloy PowdersY.Q. He, C.H. Mao and J. Yang 1106
Mechanical and Physical Properties of Nano-MetalsM. Lewandowska, A. Zagorski and K.J. Kurzydłowski 1110
Tensile Properties of Bulk Nanocrystalline Ni and Ni-W Fabricated by Sulfamate BathI. Matsui, Y. Takigawa, T. Uesugi and K. Higashi 1114
High Strength and High Ductility in Electrodeposited Nanocrystalline Ni–W AlloyK. Fujita, T. Suidu and T. Yamasaki 1118
Processing and Excellent Oxidation Resistance of Nanocrystalline Fe-Cr AlloysR.K. Gupta, B.V. Mahesh, R.K. Singh Raman and C.C. Koch 1122
Controlled Growth of 1-D Nanomaterials Base on Electro-Deposited Nanocrystalline Films:A OverviewC.X. Pan, J.C. Chen, X.Z. Li and Y.L. Liu 1126
Nanocrystalline Phosphors for Lighting and Detection ApplicationsC.J. Summers, H.M. Menkara, R.A. Gilstrap, M. Menkara and T. Morris 1130
Effect of Sol-Gel Synthesis on the Structural and Photoluminescence Properties ofMagnetoplumbite-Type Strontium FerriteG.B. Teh, Y.C. Wong, J. Wang, S.G. Tan and B. Samini 1134
l PRICM7
Combined Field and Thermionic Emission Process in ZnO Nanostructure Cold EmissionCathodeQ. Zhang, J.J. Qi, Y. Zhang, Q.L. Liao and X. Li 1138
Synthesis and Characterization of CdSe Microspheres via Solvothermal ProcessJ. Yang, C.L. Zang and X.N. Cheng 1142
Preparation and Characterization of BNC Compounds with Cylindrical and BambooNanotubesD.M. Zhu and E.H. Kisi 1146
Investigation on the Plasma-Induced Electron Emission Properties of ZnO Nanorod andCarbon Nanotube ArraysQ.L. Liao, Y. Zhang, Y.H. Huang, J.J. Qi and Z. Zhang 1150
The Characterization and Gas Sensing Properties of Polythiophene Coated V2O5 NanotubesY. Lu, W. Jin and W. Chen 1154
Current Steps in Poly(3-Hexylthiophene)/ZnO Nanobelt Hybrid DiodesW. Guo, Y. Yang, J.J. Qi and Y. Zhang 1158
Mechanical Properties of Electrodeposited Ni-SiO2 NanocompositeH. Miyamoto, K. Ueda and T. Uenoya 1162
Modelling the Crystallization Reactions of Amorphous Precursors in Fe3B/Nd2Fe14BNanocomposite MagnetsV. Ly, S. Gorsse, K. Suzuki and C.R. Hutchinson 1166
New Crystallographic Textures of Nd2Fe14B/α-Fe Nanocomposite Materials Prepared byControlled Melt SpinningX.R. Zeng, H.C. Sheng, J.Z. Zou and S.H. Xie 1170
Effect of Organic Capping on the Magnetic Properties of Au NanoparticlesH. Zhang, K. Suzuki, K. Saito, J.S. Garitaonandia, E. Goikolea and M. Insausti 1174
The Electrical Characterization of Single ZnO Nanowries Field-Effect TransistorsH.F. Li, Y.H. Huang, X.J. Xing, J. Su and Y. Zhang 1178
Preparation of Photoluminescent Silicon Nanowires Based on Multicrystalline SiliconWafersX.Z. Sun and J.Y. Feng 1182
Shape-Controlled Synthesis and Formation Mechanism of Cobalt Nanopowders by a PVP-Assisted MethodB.C. Zhang, H.Y. Yu and D.B. Sun 1186
Symposium E: Solidification, Deformation and Related ProcessingAtomic-Scale-Deformation-Dynamics (ASDS) of Nanowires and NanofilmsZ. Zhang, Y.F. Zhang, K. Zheng, Y.H. Yue, L.H. Wang, P. Liu and X.D. Han 1190
Microstructure and Texture Evolution during Friction Stir Processing of AZ31 Mg AlloyR.L. Xin, B. Li and Q. Liu 1195
Nanostructure Formation during Deep Wire-Drawing of CopperN. Tsuji and K. Hanazaki 1201
Work-Softening, High Pressure Phase Formation and Powder Consolidation by HPTM. Umemoto, B.D. Long, Y. Todaka and K. Tsuchiya 1205
The Influence of Processing Conditions on Hardness Homogeneity Evolution inCommercially Pure Cast Aluminium Processed by ECAPS. Lathabai, M. Vargas, M. Larroque and C. Urbani 1211
Grain Refinement and Texture Evolution during Equal Channel Angular Extrusion of PureCu and Cu-Zn AlloysH.H. Chen, S.Y. Li, D.H. Zhang and X. Huang 1215
Enhancing Ductility of ECAP Processed MetalsN. Llorca-Isern, T. Grosdidier and J.M. Cabrera 1219
Ultrafine Grained Structure Formation in Low Carbon Steel Processed by SPDJ. Zrník, S.V. Dobatkin, G. Raab and L. Kraus 1223
Effects of Phase Transformation Temperature on Formation of Wear-Induced Layer in Fe-Ni AlloysH. Sato, Y. Kubota, E. Miura-Fujiwara and Y. Watanabe 1227
Materials Science Forum Vols. 654-656 m
Formation of Deformation Twins and Related Shear Bands in Copper Single CrystalsPressed by ECAPT. Ikeda, H. Miyamoto, T. Uenoya, S. Hashimoto and A. Vinogradov 1231
Susceptibility to Hydrogen Embrittlement of IF Steel with Ultrafine-Grained StructureProduced by Accumulative Roll-Bonding ProcessT. Haruna, Y. Nakagawa, D. Terada, N. Takata and N. Tsuji 1235
High Strength and Ductility in Ball-Milled Titanium Powders Consolidated by High-Pressure TorsionK. Edalati, Z. Horita, H. Fujiwara, K. Ameyama, M. Tanaka and K. Higashida 1239
Aging Behavior of Al-Li-Cu-Mg Alloy Processed by High-Pressure TorsionS. Lee, D. Akama, Z. Horita, T. Masuda, S. Hirosawa and K. Matsuda 1243
Visualization and Quantification of Severe Internal Deformation on Compressive TorsionProcessY. Kume, M. Motohashi, M. Kobashi and N. Kanetake 1247
Deformation Characteristics in AlphaType Brass Worked by TorsionM. Shinsen, M. Furui, S. Ikeno and T. Nagae 1251
Structure and Mechanical Properties of Asymmetrically Rolled IF Steel SheetD. Orlov, R. Lapovok, L.S. Tóth, I.B. Timokhina, P.D. Hodgson, D. Bhattacharjee and A. Haldar 1255
Texture Change of Severe Plastically Deformed Al Alloy SheetsI. Kim, S.K. Nam and S. Akramov 1259
Steel-Magnesium Composite Wire Obtained by Repeated Co-ExtrusionO. Bouaziz, X. Sauvage and D. Barcelo 1263
Mechanisms of Dynamic Recrystallization in Cu-Sn-P AlloyH. Miura, M. Watanabe, T. Shirai and A. Ishibashi 1267
Dynamic Recrystallization Behaviour in Cu-Sn-P Alloy for High Strength Copper TubeM. Watanabe, T. Shirai, A. Ishibashi and H. Miura 1271
Dynamic Recrystallization Behavior of Biomedical CCM Alloys in Hot CompressionProcessY.P. Li, S. Kurosu, E. Onodera, H. Matsumoto and A. Chiba 1275
Texture and Substructure Development during Post-Dynamic Softening in Ni-30%FeAusteniteH. Beladi, P. Cizek and P.D. Hodgson 1279
Evaluation of Plastic Work Density, Strain Energy and Slip Multiplication Intensity atSome Typical Grain Boundary Triple JunctionsT. Ohashi, M. Sato and Y. Shimazu 1283
Cyclic Softening of Cu-Ni-Si Alloy Single Crystals under Low-Cycle FatigueT. Fujii, H. Kamio, Y. Sugisawa, S. Onaka and M. Kato 1287
Precipitates Behavior during Thermomechanical Processing of Low Mn, Ti Added PipelineSteelsA. Dehghan-Manshadi and R.J. Dippenaar 1291
Numerical Simulation for Effects of Friction on Deformation Behaviors in a 3-DimensionalHot Upsetting ProcessY.C. Lin and Y.B. Ding 1295
The Effect of Oxygen on the Brittle-to-Ductile Transition in Silicon Single CrystalsY.J. Hong, M. Tanaka and K. Higashida 1299
Effect of Si Content on Fracture Behaviour Change by Strain Rate in Si SteelsT. Mizuguchi, R. Oouchi, R. Ueji, Y. Tanaka and K. Shinagawa 1303
Formability of Pure Titanium Long-Cup by Multi-Stage Deep DrawingY. Harada, T. Araki and T. Tsuda 1307
Influence of Roll Speed Schedule on Transverse Wall Thickness Evenness of ShellElongated by Mandrel MillS.Z. Li, Z.C. Zhang, H.Y. Bao and Z.Y. Zhou 1311
Effect of Prior Cold-Working on Strength and Electrical Conductivity of Cu-Ti Dilute AlloyAged in a Hydrogen AtmosphereS. Semboshi, H. Numakura, W.L. Gao, H. Suda and A. Sugawara 1315
Simultaneous Enhancement of Electrical Conductivities and Mechanical Properties in Cu-Ti Alloy by Hydrogenation ProcessA. Kamegawa, T. Iwaki and M. Okada 1319
n PRICM7
Development of High Strength and High Conductivity Cu-Ag-Zr AlloyH. Cho 1323
Cold Joining of Dissimilar Metal Sheets by Shot PeeningY. Harada 1327
Study on Powder Metallurgical Preparation of NiCoMnIn Alloy FoamG. Wang, X.M. Xiong, Y.D. Liu, C.Y. Wang, Y.D. Wang and L. Zuo 1331
Optimization of the Cooling Process of a Heavy Hydraulic Turbine Runner Band Casting inHeat TreatmentJ.W. Kang, T.J. Wang, H.L. Yu, T.Y. Huang and B.C. Liu 1335
Heterogeneous Nucleation and Grain Formation on Spherical and Flat SubstratesM. Qian 1339
Researches on the Nucleation Behaviors of NH4Cl Crystal on Coarse Aluminum SurfacesM. Wang, S.F. Zhu, Y. Zhang, X. Lin and W.D. Huang 1343
Directional Solidification and Characterization of Al2O3/Er3Al5O12 Eutectic In SituComposite by Laser Zone RemeltingH.J. Su, J. Zhang, Y.F. Deng, K. Song, L. Liu and H.Z. Fu 1347
Microstructure Evolution and Compression Properties of a Directionally Solidified Ni-24.8%Nb Hypereutectic AlloyS.M. Li, B.L. Jiang and H.Z. Fu 1351
The Contribution of Diffusion Coefficient to the Eutectic Instability and Amorphous PhaseFormationN. Wang, X. Wang and W.J. Yao 1355
Analysis of an Equiaxed Dendrite Growth Model with Comparisons to In-Situ Results ofEquiaxed Dendritic Growth in an Al-Ge AlloyS. McFadden, P.L. Schaffer, R.H. Mathiesen and D.J. Browne 1359
Modelling and Experiments Concerning Dendrite Re-Melting and Its Role inMicrostructural Evolution in Spray Formed Ni SuperalloysY. Zhang, Z. Guo, G. Zhang, J.W. Mi and P.S. Grant 1363
The Influence of External Mechanical Stresses on Agglomeration and Bending ofSolidifying CrystalsS. Otarawanna, C.M. Gourlay, H.I. Laukli and A.K. Dahle 1367
Undercooling Behavior and Solidification Microstructure Evolution of Sn-Cu-Ni SoldersModified by Minute Amount of Mixed Rare Earth La-CeM.B. Zhou, X. Ma and X.P. Zhang 1373
Strength and Conductivity of Deformed Cu-Fe Composites after Solidified with aHorizontal Magnetic FieldX.W. Zuo, E.G. Wang, L. Qu, P. Jia, L. Zhang and J.C. He 1377
Solidification Mechanisms in the Sn-Cu-Ni Lead-Free Solder SystemT. Ventura, Y.H. Cho and A.K. Dahle 1381
The Correlation between the Liquid Structure and the Solidification Microstructure of Sn-Cu Lead-Free SoldersX.M. Pan, N. Zhao, R.F. Ding, G.L. Wei and L. Wang 1385
Effect of Polygonal Rotor Process on Solidification Structure of Lead-Free Bismuth BronzeT. Kose, Y. Uetani, K. Nakajima, K. Matsuda and S. Ikeno 1389
Non-Equilibrium Solidification in Cu-Mg-Sn Alloys for Tribological ApplicationsA. Bravo, R. Schouwenaars, V.H. Jacobo and A. Ortiz 1393
Formation of Primary Intermetallic Compounds in Sn-Ag-Cu AlloysY. Takamatsu, H. Esaka and K. Shinozuka 1397
Electromagnetic Continuous Casting Process for Near Net Shape Aluminum Alloy BilletJ.H. Kim, M.G. Kim, J.P. Park, G.C. Lee and J.B. Kim 1400
Monte Carlo Simulation of Thermophysical Properties for Al-Ce Liquid AlloysW.J. Yao and N. Wang 1404
Semisolid Sinter-Forging of Hyper-Eutectic Al-Si Alloy Using Rapid Resistance HeatingS. Maki, M. Noda and E. Nakanishi 1408
The Character of Melt of A357 Alloy and Its Influences on the SolidificationMicrostructuresR. Zhang, L.M. Zhang, Z.H. Yang and L. Liu 1412
Materials Science Forum Vols. 654-656 o
Improving the Microstructures and Mechanical Properties of Hypereutectic Al-Si Alloys bySpray Forming TechniqueH. Cui, L.G. Hou, Y.H. Cai and J.S. Zhang 1416
Mechanical Properties and Microstructure of Aluminum Alloy Al-6061 Obtained by theLiquid Forging ProcessC.W. Su, P.H. Oon, Y.H. Bai and A.W.E. Jarfors 1420
Effect of Various Processing Route on Microstructure and Mechanical Properties of Spray-Deposited Al-8.6Zn-2.6Mg-2.2Cu AlloyF. Wang, B.Q. Xiong, Y.A. Zhang, B.H. Zhu, H.W. Liu, Z.H. Li and X.W. Li 1424
Microstructure and Mechanical Properties of a Friction Stir Processed Al-Zn-Mg-Cu AlloyM. Vargas and S. Lathabai 1428
Application of a Criterion for Cold Cracking to Casting High Strength Aluminium AlloysM. Lalpoor, D.G. Eskin, H.G. Fjær, A. Ten Cate, N. Ontijt and L. Katgerman 1432
Observation of Hot Tear Formation by Acceleration SensorH. Esaka, Y. Naitoh, D. Uotani and K. Shinozuka 1436
Mechanical Properties and Metallurgical Qualities of High Aluminum Content MagnesiumAlloys Fabricated by Twin-Roll CastingH. Watari, Y. Nishio, M. Suzuki, R. Nakamura, N. Koga and K. Davey 1440
Grain Refinement Performance of Al Cast Using Machining ChipsY. Watanabe, K. Tabushi, H. Sato and E. Miura-Fujiwara 1444
The Effect of Cu on the Microstructure and the Elevated Temperature Properties ofFerritic Heat Resistant Cast IronK.H. Choe, S.M. Lee, M.H. Kim and K.W. Lee 1448
Fabrication of Porous Metals with Directional Pores through Unidirectional Solidificationof Gas-Dissolved MeltH. Nakajima 1452
The Effect of Constricting the Melt Flow on Mechanical Properties of High Pressure DieCastingsD.R. Gunasegaram, R.G. O'Donnell, M. Givord and B.R. Finnin 1456
Development of a Magnesium Alloy Rotor with a Pin-Point Gate MoldY.C. Lee, H.H. Jo and I.D. Park 1460
Effect of Rare-Earth Elements on the Ignition-Proof Behavior of Industrial PureMagnesiumW.M. Zhao, Z.F. Shi, Z.F. Wang, Y.Y. Li, J. Ding, B.Y. Hur and R. Zhao 1464
Production Magnesium Alloy Strip with Boss and Rib Section by Melt Drag Process andExperimental ConditionsS. Nishida, K. Fukudome, J. Kudo and M. Motomura 1468
Effect of Oxygen on the β-Grain Size of Cast TitaniumM.J. Bermingham, S.D. McDonald, M.S. Dargusch and D.H. StJohn 1472
Symposium F: Modelling and Simulation of Microstructures andProcessesSolving Complex Thermal and Mass Transport Problems with the Lattice Monte CarloMethodT. Fiedler, G.E. Murch and I.V. Belova 1476
Numerical Simulation of Grain Selection Behavior of Single Crystal Ni3Al Based SuperalloyCastingD. Pan, Q.Y. Xu and B.C. Liu 1482
Monte-Carlo Modeling of Recrystallization Kinetics of Cold-Rolled TitaniumY.B. Chun, S.L. Semiatin and S.K. Hwang 1486
Numerical Simulation on Semi-Solid Metal Slurry Preparation by A-EMSZ.F. Zhang, J. Xu and X.R. Chen 1492
Application of Continuous Displacement Cluster Variation Method to Study PhaseEquilibriaT. Mohri 1496
Numerical Characterization of Anisotropic Heat Sink CompositesT. Fiedler, G.E. Murch, T. Bernthaler and I.V. Belova 1500
p PRICM7
Phase Field Simulation of Ni4Ti3 Precipitation in Porous NiTi Shape Memory Alloys underApplied StressesC.B. Ke, X. Ma and X.P. Zhang 1504
The Identification of Phase by Overlapping of First Derivative of Dilatation in Low CarbonSteels Multi-Phase PresentingB.J. Park, J.M. Choi, S.H. Lee, K.S. Lee and K.J. Lee 1508
A Monte Carlo Simulation of Melting in Prototype CrystalK. Sato, S. Takizawa and T. Mohri 1512
Three-Dimensional Modeling and Simulation of Dendrite Morphology of Cast Mg AlloysL. Huo, Z.Q. Han and B.C. Liu 1516
A New Algorithm of Phase Field Approach to Polycrystalline Dendritic Solidification inTwo and Three DimensionsM.Y. Wang and T. Jing 1520
Phase Field Modelling of Dendrite Fragmentation during Thermal ShockZ. Guo, J.W. Mi and P.S. Grant 1524
A Cellular Automaton Model with the Lower Mesh-Induced Anisotropy for DendriticSolidification of Pure SubstanceX. Lin, L. Wei, M. Wang and W.D. Huang 1528
Homogenisation of Cast Microstructures: Thermodynamic Calculation and KineticSimulationZ.L. Guo, A.P. Miodownik and R.S. Qin 1532
Modeling of Microstructure Development in a Continuously Solidified Immiscible AlloyJ.Z. Zhao, H.L. Li and Q.L. Wang 1536
Thermal Modeling of Direct Digital Melt-Deposition ProcessesK.P. Cooper and S.G. Lambrakos 1540
Physical and Numerical Simulation of Flow and Temperature in Molten Pool during StripCasting ProcessS.B. Ren, J.F. Fan, Y. Yu and Y. Fang 1545
Numerical Simulation of Bubbles Expansion and Solidification of Metal FoamsH. Hao, M. Diop, S. Yao and X.G. Zhang 1549
Physical Model of Aluminium Refining Process in the Batch and Continuous ReactorsM. Saternus and J. Botor 1553
Modeling Study of the Influence of Subflux Controller of Turbulence on the Molten SteelFlow in TundishT. Merder 1557
Optimum Pass Design of Bar Rolling for Producing Bulk Ultrafine-Grained Steel byNumerical SimulationT. Inoue 1561
Numerical Simulation of Deformation during Hot Procedure for Large Hydraulic TurbineRunner BladeP. Wang, N.M. Xiao, D.Z. Li and Y.Y. Li 1565
Grain Fragmentation in Equal Channel Angular Pressed CopperC.F. Gu, L.S. Tóth, B. Beausir, T. Williams and C.H.J. Davies 1570
Finite Element Analysis of Multi-Pass Equal Channel Angular Extrusion/Pressing ProcessA. Krishnaiah, K. Kumaran and C. Uday 1574
Statistics for Quantifying the Mechanical Properties of NanomaterialsC.S. Lu 1578
Molecular Dynamics Based Observations of Grain Boundaries and Lattice DefectsFunctions in Fine Grained MetalT. Kameda and B.R. Zhang 1582
Analysis of {10-12} Twin Structure by Molecular Dynamics MethodK. Nakamura, H. Kitahara and S. Ando 1586
Effect of Micro-Elasticity on Grain Growth and Texture Evolution: A Phase Field StudyD.U. Kim, S.G. Kim, W.T. Kim, J.H. Cho, H.N. Han and P.R. Cha 1590
Advanced Material-Technological Modelling of Complex Dynamic ThermomechanicalProcessesB. Mašek, H. Jirková, J. Malina and Š. Jeníček 1594
Materials Science Forum Vols. 654-656 q
A Multi-Scale Constitutive Model in High Temperature Deformation of Near Alpha Ti-5.6Al-4.8Sn-2.0Zr AlloyM.Q. Li and J. Luo 1598
Study on Casting Roll during Twin-Roll Casting of Thin StripX.M. Zhang, Z.Y. Jiang, D.B. Wei, X.H. Liu and G.D. Wang 1602
Crystal Plasticity Finite Element Modelling of the Influence of Friction on SurfaceRoughening during Uniaxial Planar CompressionH.J. Li, Z.Y. Jiang, D.B. Wei, J.T. Han and A.K. Tieu 1606
Rigid-Plastic Finite Element Analysis of Cross Wedge RollingD.C. Chen, C.S. You, G.N. Lai and S.C. Ji 1610
Research on Design Method of Polygonal Roll Pass for Stretch Reduced Seamless TubesS.Z. Li, H.Y. Bao, Z.C. Zhang, Y.H. Li and G.M. Long 1614
Effects of Forging Processing Parameters on Axial Effective Strain in Heavy ForgingsY.C. Lin, M.S. Chen and J. Zhang 1618
The Material Flow Analysis in the Modified Orbital Forging TechnologyJ. Nowak, Ł. Madej, F. Grosman and M. Pietrzyk 1622
Research on Winding Technology of Thin Helical Tube of Pd-Y AlloyG. Ma, J. Zheng, Y.E. Li and Y. Wang 1626
Numerical Simulation on Adiabatic Shearing Behavior of Vanadium Alloy V-5Cr-5Ti Hat-Shaped SpecimenY.X. Yan, X.C. Huang and W.J. Hu 1630
Advances on Modelling of the Tool/Workpiece Interface during High Shear ProcessingM. Krzyzanowski and M.W. Rainforth 1634
Effects of Hub Contact Shape on Contact Pressure and Fatigue Life in a Press-Fitted ShaftD.H. Lee, S.J. Kwon, J.W. Seo and W.H. You 1638
Residual Stresses in Cold Spray Process Using Finite Element AnalysisT.D. Phan, S.H. Masood, M.Z. Jahedi and S. Zahiri 1642
Thermal-Structural Finite Element Analysis of Injection Moulding Dies with OptimizedCooling ChannelsA.B.M. Saifullah, S.H. Masood and I. Sbarski 1646
Modeling Corrosion of a Metal under an Aerosol DropletM.S. Venkatraman, I.S. Cole, D.R. Gunasegaram and B. Emmanuel 1650
Determination of Interphase Thickness and Mechanical Properties of Effective Nanofillersin Polymer Nanocomposites by Molecular Dynamic SimulationW. Xu, Q.H. Zeng, A.B. Yu and D.R. Paul 1654
Theoretical Study of Growth Mechanism of Goethite in the Presence of SurfactantsJ. Yue, X.C. Jiang and A.B. Yu 1658
First-Principles Calculation of Water Molecules with Adsorbed Ions on the Fe(001) SurfaceN. Nunomura and S. Sunada 1662
First-Principles Calculations of C2H4 Adsorption on Pd Surface Stacked on Fcc-AuN. Taguchi, S. Tanaka, T. Akita, M. Kohyama and F. Hori 1666
Mechanical Properties and Size Effects of ZnO Nanowires Studied by First-PrinciplesCalculationZ.J. Gao, Y.S. Gu and Y. Zhang 1670
First-Principles Study of Formation and Properties of Fcc-NdOx in Nd-Fe-B SinteredMagnetsY. Chen, S. Hirosawa and S. Iwata 1674
First-Principles Investigation of the Electronic Structure and Magnetic Properties for Co-Doped Fe3O4Y.H. Hou, Y.J. Zhao, D.C. Zeng, Z.W. Liu and L.S. Wen 1678
Simulation of Dislocation Accumulation in ULSI Cells of Reduced Gate LengthM. Sato, T. Ohashi, K. Aikawa, T. Maruizumi and I. Kitagawa 1682
Microstructure of a Paint Primer - a Data-Constrained Modeling AnalysisS. Yang, D.C. Gao, T. Muster, A. Tulloh, S. Furman, S. Mayo and A. Trinchi 1686
The Effect of the Doping Profile in Aluminum Back-Surface-Field on the ElectronicProperties of c-Si Solar CellsJ.C. Zhou and Y.M. Chen 1690
r PRICM7
Symposium G: Thin Films and Surface EngineeringApplication of High Power DC Arc Plasma for Mass Production of High QualityFreestanding Diamond Films and Diamond Film Coated Cutting ToolsF.X. Lu, C.M. Li, Y.M. Tong, W.Z. Tang, G.C. Chen, J.H. Song and L.F. Hei 1694
Crater Eruption Induced by High Current Pulsed Electron Beam (HCPEB) TreatmentT. Grosdidier, X.D. Zhang, J. Wu, N. Allain-Bonasso, K.M. Zhang, J.X. Zou, Y. Qin, X.N. Li,S.Z. Hao and C. Dong 1700
Constrains of Super-Current Flow in YBCO Coated ConductorsS. Pysarenko, A.V. Pan and S.X. Dou 1704
Study of Deposition of Aluminum Nitride Thin Films by Hollow Cathode Electron BeamVapor Deposition MethodZ.X. Mu, X.D. Mu, C. Wang and C. Dong 1708
Synthesis and Its Characteristic of Silicon Nitride Film Deposited by ECR-PECVD at LowTemperatureA.M. Wu, H.Y. Yue, X.Y. Zhang, F.W. Qin, T.J. Li and X. Jiang 1712
Effect of Nitridation on GaN Film Grown on Glass Substrate by ECR-PEMOCVD MethodF.W. Qin, A.M. Wu, F.C. Liu, B.D. Liu and X. Jiang 1716
Research on Influence of Ion-Assisted Deposition to the Optical and Mechanical Propertiesof SiO2 FilmD.S. Wang, C.T. Luo, T. Chen, Y.Q. Xiong and J.Z. Wang 1720
Fabrication of Numerous Ferromagnetic Metal Nanowires Using ElectrodepositionTechniqueT. Ohgai, T. Fujimaru, K. Takao and A. Kagawa 1724
Fabrication of Co/Cu Multilayered Nanowires Using a Pulsed Current DepositionTechniqueT. Ohgai, K. Hashiguchi, T. Morimura, K. Takao and A. Kagawa 1728
Electrodeposition of ZnTe Compound Semiconductors from Aqueous SolutionT. Ohgai, T. Ikeda, Y. Kawanaka, K. Takao and A. Kagawa 1732
The Effect of Cobalt Addition on Structural and Magnetic Properties of ElectrodepositedIron-Platinum Nanocrystalline Thin FilmsS.H. Teh and I.I. Yaacob 1736
Deposition of GaN Films on Freestanding CVD Thick Diamond FilmsD. Zhang, Y.Z. Bai, F.W. Qin and J.M. Bian 1740
The Preparation for Cu(Sn) Films of Barrierless InterconnectionL.Y. Xu, X.N. Li, J.P. Chu and C. Dong 1744
The Effects of Substrate Temperature on the Composition and IR Transmission Propertiesof Germanium Carbon Films Deposited by Reactive RF Magnetron SputteringY.P. Li, Z.T. Liu, F. Yan and W.T. Liu 1748
Technological Parameters and Electrical Properties of Ti/TiN Multilayer Films Prepared byMagnetron SputteringM. Hu, Y. Liu and Z.Q. Lai 1752
Investigation on the Mechanical Properties of Molybdenum-Doped Zinc Oxide TransparentThin Film by Sputtering TechniqueT.H. Chen, P.T. Hsieh, C.Y. Huang, J.Q. Wang and R.W.K. Chuang 1756
Preparation and Characterization on Cellulose Nanofiber FilmL.Y. Zhang, T. Tsuzuki and X.G. Wang 1760
Effect of Iodine Doping on Surface and Optical Properties of Polyterpenol Thin FilmsK. Bazaka and M.V. Jacob 1764
Triangular Dislocation Loop Model for Surface Displacement in Indented Thin FilmsS. Muraishi, H. Chinen, M. Takaya and K. Hara 1768
Structural Stabilities in GaAs Nanocrystals Grown on Si (111) SurfaceH. Yasuda, K. Matsumoto, T. Furukawa, M. Imamura, N. Nitta and H. Mori 1772
Effect of Ultra-Thin Pt Layer on the Preferred Orientation of AlN FilmsT. Harumoto, S. Muraishi, J. Shi and Y. Nakamura 1776
Synthetic Properties of the c-Axis Tilted AlN Thin FilmsC.J. Chung, C.L. Wei, P.T. Hsieh, C.Y. Huang, J.F. Lin, Y.C. Chen and C.C. Cheng 1780
Materials Science Forum Vols. 654-656 s
Enhancement of Photocatalytic Reaction of Titanium Dioxide Film by Surface TexturingJ. Shimizu, L.B. Zhou, K. Takamori, H. Ojima, T. Yamamoto and H. Huang 1784
Growth and Characterization of Ge1-xSnx Layers for High Mobility Tensile-Strained GeChannels of CMOS DevicesO. Nakatsuka, Y. Shimura, S. Takeuchi, N. Tsutsui and S. Zaima 1788
The Optimization of SMR-Based Filter by Thermal Annealing TreatmentC.L. Wei, Y.C. Chen, C.C. Cheng, K.S. Kao, C.J. Chung and W.T. Chang 1792
Effect of Interlayer Thickness on Stress and Dielectric Properties of MgTiO3 Modified(Ba,Sr)TiO3 Multilayer Thin FilmsS.B. Lu and Z.K. Xu 1796
Direct Measurement for Electric Resistance of Ferromagnetic Metal- Nano-Contact inOxide LayerM. Sahashi, Y. Watanabe, S. Kawasaki and K. Miyake 1800
Surface Treatment of 316L Stainless Steel by High Current Pulsed Electron BeamS.Z. Hao, Y. Xu, M.C. Li and C. Dong 1803
Numerical Simulation for Surface Modification of Thermal Barrier Coatings by High-Current Pulse Electron BeamY. Qin, W. Qu, X.X. Mei, S.Z. Hao, J.J. Zhao, W. Lu and C. Dong 1807
Effect of Pre-Deforming on Plasma Nitriding Response of 304 Stainless SteelA. Nishimoto and K. Akamatsu 1811
The Addition of Silica Nanoparticles with Different Sizes for a Silica Film on Stainless Steelwithout Crack FormationH.Y. Kim, G.T. Kim, H.Y. Lee and T.J. Hwang 1815
Development of Infrared Ray Curing Technology at Continuous Coil Coating LineJ.P. Kyung and I.W. Dae 1819
PEM Fuel Cell Separator with Thermally Nitrided Low Carbon SteelD.G. Nam, C.Y. Choi, J.H. Jang, Y.D. Park and N.H. Kang 1823
Thermal Barrier Systems and Multi-Layered Coatings Fabricated by Spark PlasmaSintering for the Protection of Ni-Base SuperalloysD. Monceau, D. Oquab, C. Estournès, M. Boidot, S. Selezneff and N. Ratel-Ramond 1826
Electrochemical Characteristics of Sintered Duplex Ferritic-Austenitic Stainless SteelsProduced by Powder Metallurgy ProcessS. Sunada, K. Arai, K. Mori, M. Miyahara and K. Majima 1832
Multilayered Approach to Step-Edge Josephson JunctionsO.V. Shcherbakova, A.V. Pan, S. Fedoseev, S.X. Dou, S.K.H. Lam, J. Du and C.P. Foley 1836
Deposition of Superconducting Thin Films of Magnesium Di-Boride on Various Substratesby Electroless Plating ProcessS.K. Putatunda, K.S. Vijayaragavan and G. Lawes 1840
Raman Scattering Studies in Oxygen-Vacancy Induced Ferromagnetism of Co-Doped ZnOFilmsS.J. Chen and K. Suzuki 1844
Characterization Performance of Laser Melted Commercial Tool SteelsM. Bonek and L.A. Dobrzański 1848
Fundamental Property of Metals – Grain Boundaries Phase Transition as a Basis ofNanostructured Layers, Materials and Composites ProductionY.A. Minaev 1852
In Situ TiB2 Particles Reinforced Copper Matrix Composite Coating on Mould Steel byLaser CladdingX. Liu and S. Yang 1856
Determination of Mechanical Properties of TiN Coating Using a Notched CylindricalStainless Steel SubstrateJ. Elambasseril, R.N. Ibrahim and R. Das 1860
Liquid Phase Separation Behaviors in Cu-Fe Alloy Coatings Synthesized by Laser CladdingY. Lu and Y.Z. He 1864
Microstructure and Wear Behaviour of Laser Induced In-Situ Formation of TiBx and TiCTitanium Composite CoatingsJ. Liang, C.X. Ren, C.S. Liu and S.Y. Chen 1868
t PRICM7
Composition Design and Laser Cladding of Cu-Zr-Al Alloy Coating on the MagnesiumAlloyC.S. Wang, T. Li, B. Yao, R. Wang and Q. Wang 1872
Effect of Titania Nanoparticles on Micro-Arc Anodizing of AM60B Magnesium AlloyA. Da Forno, L. Ke and M. Bestetti 1876
Structure and Properties of Cold Spray CoatingsK. Spencer, V. Luzin and M.X. Zhang 1880
Aluminizing of TiAl-Based Alloy Using Thermal Spray CoatingT. Sasaki, T. Yagi and T. Watanabe 1884
Production of Stainless Cast Iron Base Deposits with Dispersed Titanium Carbide Particlesby Plasma SprayingY. Hoshiyama, T. Miyazaki and H. Miyake 1888
Effect of Ultrasonic Surface Peening on Fatigue Property of 7B04 High Strength andToughness Aluminum AlloyQ.F. Zhu, Z.M. Sun, T.D. Ma, V.A. Klimenov, V. Borozna and B.H. Zhu 1892
Multi-Layer Coating for Optical Mold of Strengthening by Electroplating Ni-W andElectroless Plating Ni-Mo-P by Nonisothermal MethodY.F. Chang, K.H. Hou and M.D. Ger 1896
Investigation of Super-Hydrophobic Coatings with Hierarchical Structures Surface on MildSteelZ.P. Zhang, Y.H. Qi, Y. Zhang, G.K. Mo and J.Z. Wang 1900
Electrochromic Properties of Nano-Columnar Nickel OxideC.M. Wang, K.S. Kao, D.L. Cheng, C.C. Cheng, P.T. Hsieh, S.Y. Lin, T.Y. Shih and C.Y. Wen 1904
Preparation and Property of a Fe-Doped DLC Multilayer by Ion SourcesN. Ren, Z.J. Ma, D.C. Zhao, G.J. Xiao and S.H. Wu 1908
Electrodeposition of CuSn Alloy from Noncyanide Sulfosuccinate BathT. Nakamura, T. Nagayama, T. Yamamoto, Y. Mizutani and H. Nawafune 1912
Development of a Processing Window for the Transformation Hardening of Nickel-Aluminium-BronzeR. Cottam and M. Brandt 1916
The Investigation of the Interdiffusion Barrier in TiAl/MCrAlY SystemW. Wang, Y.X. Cheng, S.L. Zhu, F.H. Wang and L. Xin 1920
Effect of Pre-Oxidation Treatment on the Thermal Shock Resistance of Thermal BarrierCoatings in a Combustion Gas EnvironmentH. Mei, L.F. Cheng, Y.N. Liu and L.T. Zhang 1924
Investigation on Interfacial Bonding Strength of Anisotropic Conducive Adhesive with aNew Cohesive Zone ModelJ. Zhang, Y.C. Lin, X.L. Wei and L.G. Huang 1928
The Effects of Heat Treatment on the Bonding Strength of Surface-Activated Bonding(SAB)-Treated Copper-Nickel Fine Clad MetalsK.H. Kim, S.C. Lim and H.C. Kwon 1932
Investigation on Oxidation Resistance of NiCoCrAlY Coating Irradiated by High CurrentPulsed Electron BeamX.X. Mei, C.X. Wang, W. Qu, Y. Qin, C. Dong and Y.N. Wang 1936
Influence of Cryomilling on Microstructure, Phase Stability and Oxidation Behavior ofNiCrAlY Bond Coat in Thermal Barrier Coatings: Experimentation and MechanisticInvestigationK.K. Ma and J.M. Schoenung 1940
Hot Corrosion Behavior of a Novel Enamel-Based Thermal Barrier CoatingM.L. Shen, S.L. Zhu, L. Xin and F.H. Wang 1944
High Temperature Corrosion of Fe-Cr, Fe-Al, Fe-Si and Fe-Si-Al Alloys in CO2-H2O GasesT. Gheno, H. Li, J.Q. Zhang and D.J. Young 1948
Corrosion and Oxidation Protection of Ti6Al4V Alloy by an Inorganic Metal ModifiedSilicate Composite CoatingC. Wang, S.L. Zhu and F.H. Wang 1952
Surface Modification for Enhanced Corrosion Resistance Using Fluid Bed ReactorChemical Vapour Deposition (FBR-CVD)K.D. Ralston, D. Fabijanic and N. Birbilis 1956
Materials Science Forum Vols. 654-656 u
Development of Laser Surface Treatment with Excellent Corrosion Resistance andConductivity Performance on Magnesium Alloy ProductsM. Hino, Y. Mitooka, K. Murakami, K. Nishimoto and T. Kanadani 1960
Corrosion Behavior of 6000 Series Aluminum Alloys Produced by Conventional andPowder Extruded Process through Electrochemical Impedance MethodS. Sunada, N. Nunomura and K. Majima 1964
Electrochemical Corrosion Behaviors Using Double Glow Forming TiN Multi-PermeationLayerY.P. Liu, J.X. Xue and P.D. Han 1968
Symposium H: Advanced CeramicsImpact Indentation Properties and Interfacial Strength of Ceramic CoatingsY.W. Bao, K.M. Li, D.T. Wan and X.Q. Cao 1972
Relaxor Ferroelectricity and Electrostrictive Behavior of KNN-ST CeramicsH.Q. Fan, Z. Li, P.R. Ren and G.C. Jiao 1978
Environmental Impact Evaluation and Rationalization of Ceramics Process on the Basis ofExergy AnalysisH. Kita, H. Hyuga, T. Nagaoka and N. Kondo 1982
Densification Behavior in Spark-Plasma-Sintering of MgAl2O4 SpinelK. Morita, B.N. Kim, H. Yoshida and K. Hiraga 1986
Optimization of Dielectric Properties of Glass Added BaxSr1-xTiO3 Ceramics for PulsedPower ApplicationsQ.M. Zhang, L. Wang, J. Luo, Q. Tang and J. Du 1990
VSintering and Nonlinear Dielectric Properties of Ba0.6Sr0.4TiO3 Ceramics Prepared byCitrate MethodX.F. Zhang, Q. Xu, W. Chen and H.X. Liu 1994
Structure and Diffused Ferroelectric Properties in Ba(Ti0.8Sn0.2)O3 CeramicsD.Y. Gui, H. Hao, Y. Sun, M.H. Cao, Z.Y. Yu, L.H. Xue and H.X. Liu 1998
Millimeter-Wave Reactive Sintering of Neodymium-Doped Yttrium Aluminum GarnettM.A. Imam, A.W. Fliflet, S.H. Gold, R.W. Bruce, C. Stephenson and C.R. Feng 2002
Solid-State Reaction Synthesis and Mechanism of Lithium SilicatesT. Tang, H.G. Huang and D.L. Luo 2006
Reaction Sintering Kinetics of Mullite Ceramics Prepared from High Aluminum Fly AshJ.H. Li, H.W. Ma, L.X. Tong and X.Q. Jiang 2010
Solid-State Synthesis and Properties of Y-Doped BaCeO3Y. Li, Y.S. Ding and C.Z. Wang 2014
Effect of Ti Content on Microstructure and Mechanical Properties of Si3N4/Si3N4 JointsBrazed with Ag-Cu-Ti+Mo Composite FillerJ. Zhang and Y.M. He 2018
Preparation of Magnesium Carbonate Whisker by Using Magnesite TailingsN. Wang, Y.Y. Li and H.W. Ni 2022
Preparation and Luminescent Properties of Na5Eu(MoO4)4-x(PO4)x Red Phosphors forWhite Light-Emitting Diodes ApplicationC.S. Xi, S.K. Shi, H.L. Gong and J. Zhou 2025
Ferroelectric and Photocatalytical Properties of Ta-Based and Nb-Based Oxide Ceramicsand Powders from Environmentally Friendly Water-Soluble Tantalum and NiobiumPrecursorsA.D. Li, H.F. Zhai, J.Z. Kong and D. Wu 2029
Influence of Fiber Properties on the Performance of Piezoelectric 1-3 CompositesW.W. Peng, J. Zhou, L. Xu and W. Chen 2033
Effect of LiNbO3 on Piezoelectric Properties of K0.5Na0.5NbO3 CeramicsM.H. Cao, Z. Li, F. Li, H. Hao and H.X. Liu 2037
Optical Properties of Transparent MgO-Doped Alumina Fabricated by Spark PlasmaSinteringB.N. Kim, K. Hiraga, K. Morita and H. Yoshida 2041
Characterization and Energy Storage Density of BaTiO3 - Ba(Mg1/3Nb2/3)O3 CeramicsY.Q. Li, H.X. Liu, Z.H. Yao, J. Xu, Y.J. Cui, H. Hao, M.H. Cao and Z.Y. Yu 2045
v PRICM7
High Performance of Sub-Micro-Layered Ti3C2/(Cu-Al) Cermets Prepared by In-Situ Hot-Extruding MethodZ.Y. Huang, H.X. Zhai, M.Q. Li and X.H. Chen 2049
Symposium I: Biomaterials, Smart Materials and StructuresNanostructured Titanium Biomaterials: Understanding and ApplicationsY.M. Im, D.W. Khang and T.H. Nam 2053
Laser Forming of Ti-6Al-7Nb Alloy Powder Compacts for Medical DevicesH. Miura, K. Okawachi, H.G. Kang, F. Tsumori, K. Kurata and N. Arimoto 2057
Nanotube and Micropore of Ti Alloy Systems for BiocompatibilityH.C. Choe 2061
In Vitro and In Vivo Evaluation Of Calcium Phosphate Bone Graft SubstitutesH.Y. Song, Y.H. Kim, J.M. Anirban, I.S. Byun, K.A. Kwak and B.T. Lee 2065
Mathematical Modeling of Polymer Biodegradation and ErosionY.H. Chen and Q. Li 2071
Development of Polyimide/SMA Thin-Film ActuatorA. Ishida and M. Sato 2075
Australian Defence Applications of Advanced Smart Materials ResearchC.M. Scala, M.E. Ibrahim, A.R. Wilson, D.P. Edwards and V.T. Truong 2079
The High Temperature Connecting Strength and Thermal Stability of Ti44Ni47Nb9 SMAPipe CouplingW. Jin 2083
Design of a New Biocompatible Ti-Based Shape Memory Alloy and Its SuperelasticDeformation BehaviourJ.Y. Xiong, Y.C. Li, P.D. Hodgson and C.E. Wen 2087
Computational Modelling of Deformation of NiTi Plates with Circular HolesB. S. Shariat, Y. Liu and G. Rio 2091
Effect of the Addition of Gd on Ni53Mn22Co6Ga19 High-Temperature Shape Memory AlloyY.Q. Ma, S.Y. Yang, S.L. Lai, S.W. Tian, C.P. Wang and X.J. Liu 2095
Hysteretic Behavior of Concrete Cylinders Confined by Active Confining SMA WireJacketsE.S. Choi, H.S. Lee, J.N. Park and B.S. Cho 2099
Compression Behavior and Texture Development of Polymer Matrix Composites Based onNiMnGa Ferromagnetic Shape Memory Alloy ParticlesM. Okuno, T. Inamura, H. Kanetaka and H. Hosoda 2103
Shape Memory Effect in Fe-Pd Magnetic Shape Memory Alloy Thin FilmsJ.H. Han, T. Ahn, H. Kim and K.K. Jee 2107
New SMA Actuator with High Energy Efficiency and Quick ResponseK.K. Jee, J.H. Han, J.M. Park and W.Y. Jang 2111
Phase Stability and Mechanical Properties of Ti-Cr Based Alloys with Low Young’sModulusY. Murayama, S. Sasaki, H. Kimura and A. Chiba 2114
Phase Constitution and Mechanical Properties of Ti-(Cr, Mn)-Sn Biomedical AlloysY. Kusano, T. Inamura, H. Kanetaka, S. Miyazaki and H. Hosoda 2118
Phase Constituents of Ti-Cr-Au and Ti-Cr-Au-Zr Alloy SystemsY. Shinohara, T. Ishigaki, T. Inamura, H. Kanetaka, S. Miyazaki and H. Hosoda 2122
Effect of Nitrogen Addition on Mechanical Property of Ti-Cr-Sn AlloyY. Nakahira, T. Inamura, H. Kanetaka, S. Miyazaki and H. Hosoda 2126
Biomedical Titanium Alloy with Ultralow Elastic Modulus and High StrengthY.L. Hao and R. Yang 2130
Effect of Oxygen Addition on Isothermal Omega Phase Stability in Ti-29Nb-13Ta-4.6ZrM. Nakai, M. Niinomi, T. Akahori and H. Tsutsumi 2134
Effect of Y2O3 on Mechanical Properties of Ti-29Nb-13Ta-4.6Zr for BiomedicalApplicationsX. Song, M. Niinomi, H. Tsutsumi, T. Akahori, M. Nakai, S. Yonezawa and L. Wang 2138
Improvement of Mechanical Performance and Biocompatibility of Spinal Implant RodMade of Beta-Type Ti-Nb-Ta-Zr AlloyM. Niinomi, K. Narita, M. Nakai, T. Akahori, H. Tsutsumi and K. Oribe 2142
Materials Science Forum Vols. 654-656 w
Microstructure Characterization of Laser Welded Near-β Titanium Alloy ‘TLM’ underDifferent Process ConditionsA. Buddery, G. Wang, Z.T. Yu, M.S. Dargusch and S. Nabulsi 2146
Effect of Aging on Mechanical Properties of Ti-Mo-Al Biomedical Shape Memory AlloyH. Hosoda, M. Taniguchi, T. Inamura, H. Kanetaka and S. Miyazaki 2150
Self-Accommodation Morphology in Ti-Nb-Al Shape Memory AlloyT. Inamura, H. Hosoda, H. Kanetaka, H.Y. Kim and S. Miyazaki 2154
Fabrication of Ti-Based Biodegradable Material Composites Prepared by Spark PlasmaSintering MethodE. Miura-Fujiwara, T. Teramoto, H. Sato, E. Kobayashi and Y. Watanabe 2158
Calcium Phosphate Coating on Titanium Using Dry ProcessT. Narushima, K. Ueda, T. Goto, J. Kurihara and H. Kawamura 2162
MAO-Prepared Hydroxyapatite Coating on Ultrafine-Grained TitaniumM. Qi, Z.Q. Yao, Y. Ivanisenko and H.J. Fecht 2168
Pack Cementation Treatment of Titanium Using Tetracalcium Phosphate Powder forBiomedical ApplicationsK. Ueda, H. Suto, K. Nakaie and T. Narushima 2172
Phase and Morphology of Carbides in ASTM F75 Co-Cr-Mo-C Alloys Formed at 1473 to1623 KS. Mineta, Alfirano, S. Namba, T. Yoneda, K. Ueda and T. Narushima 2176
Heat Treatment of ASTM F75 Co-Cr-Mo-C-Si-Mn AlloysAlfirano, S. Mineta, S. Namba, T. Yoneda, K. Ueda and T. Narushima 2180
Grain Refining Technique and Mechanical Properties of the Biomedical Co-Cr-Mo AlloyS. Kurosu, Y.P. Li, H. Matsumoto and A. Chiba 2184
Effect of Temperature and Strain Rate on Microstructure of Dynamically RecrystallizedNi45Co5 Mn36.7In13.3 AlloyG. Wang, W.R. Zhao, Y.D. Liu, C.Y. Wang, Y.D. Wang and L. Zuo 2188
Biodegradable Mg-Ca and Mg-Ca-Y Alloys for Regenerative MedicineY.C. Li, M.H. Li, W.Y. Hu, P.D. Hodgson and C.E. Wen 2192
Calcium Phosphate Deposition on Magnesium Alloy for Bioimplant ApplicationsM.B. Kannan, Y.H. He and A. Sandham 2196
Effect of Cu Content on Unique Hardening Behavior of Dental Ag-Pd-Au-Cu System AlloySubjected to Solution TreatmentY.H. Kim, M. Niinomi, T. Akahori, M. Nakai, H. Tsutsumi and H. Fukui 2200
Investigation of Biomimetic Apatite Growth on DLC-ZrO2 Thin Films Prepared byMOCVDS. Admin, L. Randeniya, A. Bendavid, P. Martin and E. Preston 2204
Effect of Grain Boundary Segregated Dopant on Phase Stability in Tetragonal ZirconiaPolycrystalY. Takigawa, T. Yamamoto and K. Higashi 2208
Evaluation and Control of Crystallographic Alignment of Biological Apatite Crystallites inBonesT. Nakano, T. Ishimoto, J.W. Lee, S. Miyabe, N. Ikeo and H. Fukuda 2212
Change in Biological Apatite Orientation in Beagle MandibleW. Fujitani and T. Nakano 2216
Evaluation of Mechanical Properties of Regenerated Bone by Nanoindentation TechniqueT. Ishimoto and T. Nakano 2220
Effect of Penetration Rate on Insertion Force in Trabecular Bone BiopsyR. Mulligan, L. Yin, A. Lamont, Z.X. Peng, M.R. Forwood and S.H. Teoh 2225
Creating Biomaterials Inspired by the Microstructure of CuttleboneJ. Cadman, Y.H. Chen, S.W. Zhou and Q. Li 2229
Fabrication of Artificial Bone by the Combination of Electrospinning, Extrusion and SlurryProcessesT.H. Nguyen and B.T. Lee 2233
Biomimetic Artificial Cortical Bone with Aligned Microstructure Formed by a Combinationof Multi-Extrusion and Rolling ProcessesD.W. Jang, S.K. Sakar, M.S. Kim, Y.K. Min, H.Y. Song and B.T. Lee 2237
x PRICM7
Quantity and Quality of Regenerated Bone in Grooves Aligned at Different Angles from theImplant SurfaceY. Noyama, T. Ishimoto, K. Kuramoto, T. Sakai, H. Yoshikawa and T. Nakano 2241
Fabrication of Bone Substitutes by the Sponge Replica MethodM.S. Kim, D.W. Jang, Y.K. Min, H.M. Yang, H.Y. Song and B.T. Lee 2245
Changes of Bone Quality and Quantity in rhM-CSF-Treated Osteopetrotic (op/op) MiceJ.W. Lee and T. Nakano 2249
Nano-Hardness Testing of Wear Particles in Sheep Knee JointsC. Allen, Z.X. Peng, L. Yin and E. Carmichael 2253
Formation of Hydroxyapatite on Titanium Oxides in Simulated Body Fluid under UVIrradiationM. Ueda, H. Sai, M. Ikeda and M. Ogawa 2257
A Study of a Retention of Antimicrobial Activity by Plasma Polymerized Terpinen-4-olThin FilmsK. Bazaka, M.V. Jacob and E.P. Ivanova 2261
Simultaneous Incorporation of 5-Fluorouracil and Leucovorin into Chitosan Nanoparticleas Drug Carrier and Its CharacterizationP.W. Li, Y.C. Wang, Z. Peng and L.X. Kong 2265
A Novel Biodegradable Multichamber Microstructure for Implantable Drug ControlledReleaseR.X. Yu, X.Y. Zhou and Z. Zhao 2269
On the Effective Mechanical Properties of Fluid-Saturated Composites: A HomogenizationApproachL.H. Ma, B.F. Rolfe, Q.S. Yang and C.H. Yang 2273
Synthesis and Characterization of Mesoporous Carbon with MoO3 Loading via UltrasonicAssemblyX. Long, W. Chen, S.J. Chen and C.X. Zhao 2277
The Study of Cotton Finishing by Artemsia Argyi Oil MicrocapsulesG.R. He, L. Li, W.M. Au, T.K.S. Wong, Z.H. Yang and Q.L. Jiang 2281
Electrochemical Synthesis of Sensitive Layer of Polyaniline: Effects of Acid Doping onEthylene Gas SensingP. Pattananuwat and D. Aht-Ong 2285
Properties of Polyethylene Foam Incorporated with Extracted Lignin from Pulping BlackLiquorA. Boonprasertpoh, D. Pentrakoon and W. Chavasiri 2289
Symposium J: Materials Characterisation and EvaluationDynamic Atomic Mechanisms of Plasticity of Ni Nanowires and Nano Crystalline Ultra-Thin FilmsX.D. Han, L.H. Wang, P. Liu, Y.H. Yue, M.J. Yang, J.L. Sun and Z. Zhang 2293
Defect and Damage Evolution Quantification in Dynamically-Deformed Metals UsingOrientation-Imaging MicroscopyG.T. Gray III, V. Livescu and E.K. Cerreta 2297
3D Characterisation of Grain Deformation under Synchrotron RadiationM. Kobayashi, H. Toda, K. Uesugi, A. Takeuchi and Y. Suzuki 2303
Characterization of Crack-Tip Dislocations and their Effects on Materials FractureK. Higashida, M. Tanaka and S. Sadamatsu 2307
Mechanical Properties Evaluation of Nano-Structured Materials in Scanning ElectronMicroscopeS.H. Nahm, H.S. Jang, S.K. Jeon and H.J. Lee 2312
Multiscale Mapping of Mechanical Properties by Instrumented Indentation TestK.H. Kim, Y.C. Kim, S.K. Kang, K.H. Kim and D.I. Kwon 2316
X-Ray Phase-Contrast Tomography for Quantitative Characterisation of Self-HealingPolymersS. Mayo, A. Stevenson, S. Wilkins, D.C. Gao, S. Mookhoek, S. Meure, T. Hughes and J. Mardel 2322
Nucleation of Bainite on Allotriomorphic Ferrite/Austenite Interface in a Low Carbon SteelH. Guo, Y. Bai, S.W. Yang and X.L. He 2326
Precipitation Behavior in AL6XN Austenitic Stainless SteelL.J. Meng, H. Xing and J. Sun 2330
Materials Science Forum Vols. 654-656 y
The Study on the Nucleation Behaviours in IF Steel by 3-D EBSD TomographyW.Q. Xu and M. Ferry 2334
Grain Boundary-Dependent Selection Criteria for Nucleation of Gamma-Massive Grains inTiAl-Based AlloysA. Sankaran, E. Bouzy, M.R. Barnett and A. Hazotte 2338
Precipitation Behavior and Magnetic Properties of Nano–Scale Particles in a Cu–Fe–NiAlloyS. Kang, M. Takedo, Z. Hiroi and M. Takeguchi 2342
Coarsening Process of Decomposed Phases in Cu-Ni-Cr AlloysF. Hernandez-Santiago, V.M. Lopez-Hirata and M.L. Saucedo-Muñoz 2346
Grain Boundary Engineering and Alterations in Anisotropy of Interfacial PropertiesP. Lejček, V. Gärtnerová and A. Jäger 2350
Texture Distribution and Development through the Thickness of Grain Oriented SiliconSteelZ.F. Wang, R.D. Han, P.H. Li, J.X. Liu and Y.Q. Sun 2354
Three Dimensional Microstructure Characterization of an Al-Zn-Mg Alloy Foam UsingSynchrotron X-Ray MicrotomographyQ. Zhang, H. Toda, M. Kobayashi, Y. Suzuki and K. Uesugi 2358
TEM and STEM Study of the Au Nano-Particles Supported on Cerium OxidesT. Akita, S. Tanaka, K. Tanaka and M. Kohyama 2362
Challenges Associated with the Characterisation of Nanocrystalline Materials Using AtomProbe TomographyF.Z. Tang, T. Alam, M.P. Moody, B. Gault and J.M. Cairney 2366
The Fluctuation of Indium Composition in InGaN Based LED Investigated by Atom ProbeTomography (APT)B.H. Kim, G.H. Gu and C.G. Park 2370
Characterisation of the Densification Mechanism of Plasma Sprayed CordieriteN. Llorca-Isern and G. Bertran-Vidal 2374
Microstructure for Printed Multilayer LTCC Tape of Different Paste RheologyS.M. Shapee, R. Alias, A. Ibrahim, Z. Ambak, M.Z.M. Yusoff and M.R. Saad 2378
Effect of Alumina Starting Materials on Spheroidization in Flame Fusion MethodS.H. Eom, J.H. Pee, J.K. Lee, K.T. Hwang and W.S. Cho 2382
Effects of Doping Elements on Residual Oxygen/Nitrogen Contents in Red Pigment ofTantalum Nitrides (Ta3N5)E.Y. Park, J.H. Pee, Y.J. Kim and W.S. Cho 2386
The Bonding Structure of the Various High Purity or Binderless Polycrystalline CubicBoron Nitride Compacts Sintered at 5 to 7GPa and 1600 to 2000 °CE. Akhmadi, A. Minoru and T. Itsuro 2390
Defect Observation of Embedded Components of a Low Temperature Co-Fired CeramicR. Alias, S.M. Shapee, M.Z.M. Yusoff, A. Ibrahim, Z. Ambak and M.R. Saad 2394
Thermal Decomposition of Pyrite FeS2 under Reducing ConditionsL. Charpentier and P.J. Masset 2398
Shape-Controlled Syntheses of Silver Nanoparticles: Role of the SeedsC.Y. Chen, X.C. Jiang, S.X. Xiong and A.B. Yu 2402
Preparation of Highly Crystalline Mesoporous TiO2 by Using Carbon to Protect the PoreStructure at Elevated TemperatureY.D. Zhu, Y.L. Ding, X.H. Lu, W. Zhuang and L.H. Lu 2406
Properties of Screen Printed Ceramic Green Films Determined by Optical LaserProfilometryR. Mücke, N.H. Menzler, H.P. Buchkremer and D. Stöver 2410
Using Chemiluminescence to Study the Photodegradation of MaterialsK.R. Millington, M.J. Jones, S.F. Zakaria and G. Maurdev 2414
Studies on Estimating Methods of Polarization Performance for Coated Steel in SeawaterY.H. Qi, Z.P. Zhang, M. Miao and X.Z. Zhang 2418
Post-Hydrogen Permeation Characterization of V-Based Crystalline Alloy MembranesG.S. Song, M. Dolan, D. Liang and M. Kellam 2422
High-Throughput Evaluation of Crystallization Temperature of Pd-Cu-Si System UsingIntegrated Thin Film SamplesY. Aono, J. Sakurai, A. Shimokohbe and S. Hata 2426
z PRICM7
Structural Characterization of Electrodeposited Nickel-Iron Alloy FilmsY. Marita and I.I. Yaacob 2430
Surface Damage in Riveted Aircraft Aluminium Lap Joints, in the Presence of LubricantsA. Jaya, U.H. Tiong and G. Clark 2434
Testing of Aluminium Carbide Formation in Hall-Heroult Electrolytic CellS. Pietrzyk and P. Palimaka 2438
Thermodynamic Evaluation of the Fe-Pr Binary SystemG.J. Zhou and D.C. Zeng 2442
Nanoindentation Characterization of Intermetallics Formed at the Lead-Free Solder/CuSubstrate InterfaceH. Tsukamoto, Z.G. Dong, H. Huang, T. Nishimura and K. Nogita 2446
Formation and Mechanical Properties of Intermetallic Compounds in Sn-Cu High-Temperature Lead-Free Solder JointsD. Mu, H. Tsukamoto, H. Huang and K. Nogita 2450
Micro-Scratching of UHMW Polyethylene SurfacesY.Y. Liu, L.G. Gladkis and H. Timmers 2455
A New Micromechanical Elasto-Plastic Constitutive Model for Fiber-Reinforced CompositeLaminatesH.S. Zhang and Y.X. Zhang 2459
Mechanical Properties of Metallized Single NanofibersH.R. Kim, N. Kimura, H.S. Bang, B.S. Kim, Y. Watanabe and I.S. Kim 2463
Synthesis, Characterization and Analytical Modelling of Mechanical Behavior of aConducting Polymer ActuatorA. Kaynak, C.H. Yang and A. Kouzani 2467
Rheological Properties of a Particulate-Filled Polymeric Composite through FusedDeposition ProcessM. Nikzad, S.H. Masood, I. Sbarski and A.M. Groth 2471
Structural Characteristics of Pultruded FRP Composite Experienced Freezing and ThawingCyclic TemperatureJ.W. Kim, K.Y. Shin, D.M. Ok, D.J. An and S.J. Yoon 2475
Fatigue Fracture Behavior of ARB Processed AluminumH. Kitahara, T. Horike, M. Tsushida, S. Ando and N. Tsuji 2479
Numerical Simulation of Double Specimens in Split Hopkinson Pressure Bar TestingM.A. Kariem, J.H. Beynon and D. Ruan 2483
Study on Stress Distribution Near Crack Tip in Beryllium Compact Tension SpecimenP. Dong, R.W. Li and S.H. Li 2487
Microstructure Features and Contact Fatigue Crack Growth on RailJ.W. Seo, S.J. Kwon, H.K. Jun and D.H. Lee 2491
Evaluation of Residual Stress of Railway Wheel Regarding to DeteriorationS.J. Kwon, D.H. Lee, J.W. Seo and S.T. Kwon 2495
Evaluation of Surface Defects of Wheel and Rail for Korean High-Speed RailwayC.W. Lee and S.J. Kwon 2499
Influence of Mechanical Loading on Failure of Aircraft Protective CoatingsU.H. Tiong, B.R. Crawford and G. Clark 2503
Properties of PH 13-8 Mo Steel for Fatigue Application in HelicoptersS.L.H. Chan, U.H. Tiong and G. Clark 2507
The Laser Surface Remelting of Austenitic Stainless SteelB. Zbigniew, M. Bonek, L.A. Dobrzański, D. Ugues and M.A. Grande 2511
A Study of Toughness Degradation in CA6NM Stainless SteelY. Iwabuchi and I. Kobayashi 2515
Hydrogen Evolution Behavior during Tensile Deformation in Austenitic Stainless SteelsExposed to High Compressed Hydrogen AtmospheresK. Horikawa, H. Kobayashi and M. Kanno 2519
The Microstructure and Mechanical Properties of Ni-Based Superalloy after ServiceExposure in Gas TurbineK.B. Yoo and H.S. Lee 2523
Materials Science Forum Vols. 654-656 aa
Wear Resistance and Microstructural Study of Diamond Coated WC ToolsJ.N. Boland, X.S. Li, R.P. Rassool, C.M. MacRae, N.C. Wilson, S. Elbracht, V. Luzin, P. Imperiaand B. Sobott 2527
Tool Failure Criteria while Drilling Titanium AlloysS. Palanisamy, L. Cong, V. Verijenko, S.D. McDonald, R. Owen and M.S. Dargusch 2531
Effects of Strain Rate on Mechanical Properties and Microstructure of V-5Cr-5Ti AlloyW.J. Hu, X.C. Huang, F.J. Zhang, J. Mei, Y.X. Yan and Y.M. Chen 2535
Failure Analysis on the RivetH.Y. Yu, D.C. Zeng and Z.W. Liu 2539
High-Speed Fracture Phenomena of Glass Bottle by Underwater Shock WaveH. Sakamoto, S. Kawabe, Y. Ohbuchi and S. Itoh 2543
Design of Pre-Weakening and Evaluation of Structural Safety for Explosive Demolition ofConcrete SiloS.Y. Park, H. Choi, S.C. Baek, H.J. Kim and S.J. Yoon 2548
Microstructure and Mechanical Properties of High Strength Brass Alloy with SomeElementsH. Atsumi, H. Imai, S.F. Li, Y. Kousaka, A. Kojima and K. Kondoh 2552
Tensile Properties of Processed FDM Polycarbonate MaterialS.H. Masood, K. Mau and W.Q. Song 2556
Mechanical Properties of 5083 Aluminium Welds after Manual and Automatic Pulsed GasMetal Arc Welding Using E5356 FillerK. Mutombo and M. Du Toit 2560
Evaluation of Fretting Wear Behavior on the Simulated Supporting Structures of a Dual-Cooled Nuclear Fuel RodY.H. Lee and H.K. Kim 2564
Effects of Aging Parameters on the Mechanical Properties in Corson Alloy System withHigh Contents of Ni and SiG. Hagino, H. Eguchi, Y. Takayama and H. Kato 2568
Symposium K: Composites and Hybrid MaterialsThermo-Physical Properties of Ti-Coated Diamond/Al Composites Prepared by PressureInfiltrationY. Zhang, X.T. Wang, S.B. Jiang and J.H. Wu 2572
Computational Analysis of the Structural Integrity of Self-Healing CompositesF. Zhou, C.H. Wang and A.P. Mouritz 2576
Effects of Deformation-Induced Heating on Bond Strength of Rolled Metal MultilayerD.K. Yang, P.D. Hodgson and C. Wen 2579
A Study on Improvement of Fatigue Life for Woven Glass Fabric/Epoxy LaminateComposite Applied to Railway VehicleH.Y. Ko, K.B. Shin and J.S. Kim 2583
Preliminary Review of Physically Based Methodologies for Predicting the Strength ofVisibly Damaged Composite LaminatesA. Harman, A. Litchfield and R. Thomson 2587
Crack Propagation Monitoring of DCB Composite Specimens Using Distributed OpticalFiber SensorH.J. Yoon, K.Y. Song, J.S. Kim, K.B. Shin and S.C. Kim 2592
Residual Strength of a Helicopter Composite Structure Subjected to Small Arms FireR.J. Callinan, J. Wang and C. White 2596
Effect of Humidity and Thermal Cycling on Carbon-Epoxy Skin/Aramid HoneycombStructureE.S.Y. Yeo, J. Wang, L. Mirabella and A.N. Rider 2600
Mechanical Reinforcement of Three-Dimensional Spacer Fabric CompositesS.K. Wang, M. Li, Y.Z. Gu, Z.G. Zhang and B.M. Wu 2604
Quantification of the Interface Interactions in Polymer NanocompositesQ.H. Zeng, W. Xu, A.B. Yu and D.R. Paul 2608
Polymer Based Composite and Hybrid Materials for Wind Power GenerationN.M. Chikhradze, F.D.S. Marquis, L.A. Japaridze, G.S. Abashidze and L.M. Okujava 2612
bb PRICM7
The Indentation Behaviour of Carbon Fibre Composite Tubes-Experiments & ModellingR. Sudharsan, B.F. Rolfe and P.D. Hodgson 2616
Development of High Modulus/High Strength Carbon Fiber Reinforced Nanoparticle FilledPolyimide Based Multiscale Hybrid CompositesK. Naito, J.M. Yang and Y. Kagawa 2620
Characterization and Properties of Recycled Cellulose Fibre- Reinforced Epoxy-HybridClay NanocompositesH. Alamri and I.M. Low 2624
Mechanical Properties of Metallic Closed Cellular Materials Containing PolymerFabricated by Polymer PenetrationS. Kishimoto, T. Shimizu, F.X. Yin, K. Naito and Y. Tanaka 2628
Extended-Chain Crystals of High-Pressure Crystallized Poly (Ethylene Terephthalate)Oligomer/Bisphenol-A Polycarbonate BlendsJ. Lu, D.K. Xi and R. Huang 2632
Improvement of Mechanical Properties of Injection Molded Wood/PolypropyleneComposites Parts with Ultrasonic Oscillation AssistantL. Xie, T. Grueneberg, L. Steuernagel, G. Ziegmann and H. Militz 2636
Strength Evaluation of Bolted Connection in PFRP Structural MemberY.G. Lee, S.S. Lee, J.H. Nam, H.T. Kim and S.J. Yoon 2640
An Experimental Investigation on the Structural Behavior of FRP-Concrete CompositeCompression MembersJ.S. Park, I.K. Kang, J.H. Park, J.K. Park, H.T. Kim and S.J. Yoon 2644
Form Factor for the Design of Pultruded FRP Structural Members under CompressionJ.W. Choi, S.S. Lee, H.J. Joo, Y.J. Sim and S.J. Yoon 2648
Thermal Decomposition and Kinetic Study on Different Types of Glass Fiber/UnsaturatedPolyester Pipe WasteK. Saetiaw, D. Atong, V. Sricharoenchaikul and D. Aht-Ong 2652
Performance of Aluminium / Vinylester Particulate CompositeJ.A. Epaarachchi and M.T. Reushle 2656
Strength & Stiffness Estimation for Center Frame of Low-Floor VehicleY.S. Kim 2664
A Study on Structual Strength in Body Structure of Composite MaterialS.C. Yoon, J.H. Ryu and J.G. Kim 2668
Modelling of Reinforced Asphalt Products for Road ApplicationsB.T. Vuong, S.K. Choi and Z. Hoque 2672
Design of a Composite Side Beam for the Railway Bogie FrameJ.S. Kim, H.J. Yoon and K.B. Shin 2676
High Strength and Lead-Free Machinable Brass by Powder Metallurgy ProcessH. Imai, S.F. Li, Y. Kousaka, A. Kojima, H. Atsumi and K. Kondoh 2680
The Effect of a Small Volume Liquid Phase on the Hot Deformation in the BaPbO3/2024AlCompositeG.H. Fan, Z.Z. Zheng, J.C. Pang and L. Geng 2684
Composite Filler Metals for Joining Temperature-Sensitive Aluminium- Matrix CompositesB. Wielage, I. Hoyer and S. Weis 2688
Fabrication of Carbon Nano-Fiber / Aluminum Composites by Low-Pressure InfiltrationMethodG. Sasaki, Y. Hara, Z.F. Xu, K. Sugio, H. Fukushima, Y.B. Choi and K. Matsugi 2692
Effect of Interfacial Reaction on High Temperature Properties of Fe-Cr-Si Fiber ReinforcedAC8A Aluminum CompositesN. Fuyama, A. Terayama, T. Fujii, T. Shiraishi, Y. Miyake and G. Sasaki 2696
Ballistic Performance of Zr-Based Bulk Metallic Glass/Ti Surface Composites Fabricatedby High-Energy Electron-Beam IrradiationJ.H. Do, C.W. Jeon, D.H. Nam, C.N.P. Kim, Y.B. Song and S.H. Lee 2700
Microstructure and Interface Of Mg3Zn6Y Quasicrystal Particulate Reinforced Mg-8Gd-3YAlloyS.P. Wu, H.J. Kang and J.J. Guo 2704
Interfacial Characteristics of WC Particles Reinforced Hadfield Steel Matrix CompositesG.S. Zhang, Y.M. Gao, J.D. Xing, S.Z. Wei, J.W. Li and L.J. Xu 2708
Materials Science Forum Vols. 654-656 cc
Cast Bonding of Cast Irons to Ferritic Stainless SteelC. Cingi, V. Rauta, E. Niini and J. Orkas 2712
Effectiveness of Residual Stress on Forming Copper Patterns of Printed Circuit BoardH.S. Lee and H.C. Kwon 2716
Thermal Stability of Fe Filaments in Deformed Cu-Fe CompositesE.G. Wang, L. Qu, X.W. Zuo, L. Zhang and J.C. He 2720
Effects of Cu Powder Size on the Microstructure of TiB2/Cu Composites Fabricated byReactive Infiltration ProcessS. Kato, M. Kobashi and N. Kanetake 2724
Fabrication and Properties of a Combined Structural Cu Sheet for Interconnect MaterialJ.S. Shin, H.K. Moon, B.H. Kim, H.S. Lee and H.C. Kwon 2728
A Research on Interfacial Reaction of Brazing Joint of Alumina Ceramics to MetalsX.D. Ma, X.Y. Wang, J.W. Li and S.Z. Wei 2732
Anatase-Type Ti1-2xNbxAlxO2 Solid Solution/Silica (SiO2) Composite Nanoparticles:Synthesis, Phase Stability, and Photocatalytic PerformanceM. Hirano and N. Kuno 2735
Synthesis of Ni3Al/ZrO2 Nanocomposite and Study on Its High Temperature Oxidation inMixed Gas EnvironmentR. Ismail and I.I. Yaacob 2739
Crystallization of Amorphous SiCN Matrix of C/SiCN Composite under Conditions ofVacuum and Tension-Tension FatigueY. Xia, S.R. Qiao, C. Yan and C.Y. Zhang 2743
Electronic Structure of Bilayer (Fe, Ni) Metallic α-Al2O3(0001) Catalysts Towards CH4Adsorption and DissociationK. Wong, Q.H. Zeng and A.B. Yu 2747
Application of SPH for Modelling Heat Transfer and Residual Stress Generation in ArcWeldingR. Das and P.W. Cleary 2751
A Study on B-Stage CNT / Epoxy Composite Films for Electronic Packaging ApplicationsK.W. Paik and S.H. Han 2755
Superconductive Property and Microstructure of MgB2 Particle-Dispersed AluminumBased Composite MaterialsM. Mizutani, K. Matsuda, K. Makino, K. Nishimura, T. Kawabata, Y. Hishinuma, S. Aoyama andS. Ikeno 2759
Friction and Wear Behaviors of Solid Lubricants/Polyimide Composites in Liquid MediumsL.W. Mu, X. Feng, Y.J. Shi, H.Y. Wang and X.H. Lu 2763
Corrosion and Wear Resistances of Ni-P-Al2O3 Composite Film Prepared by ElectrolessPlatingR.G. Wang, H. Sawada and M. Kido 2767
Effect of TEOS Addition on Adhesion and Electrochromic Properties of Silica-PolyanilineCore-Shell Composite Films on ITO GlassG.T. Kim, H.Y. Kim, T.J. Hwang and H.Y. Lee 2771
A Method to Extract Materials Properties from Multilayer Material SystemsC. Moy, M. Bocciarelli, S.P. Ringer and G. Ranzi 2775
Synthesis and Characterization of the Layered Hybrids (CnH2n+1NH3)2MCl4 (M=Co,Cu,Znand n=2,4,6,8,10,12)L.L. Guo, X. Wu and H.X. Liu 2779
Effects of Carbon Black and Carbon Nanotube on Mechanical and Thermal Properties of80NR/20SBR CompositesA. Boonmahitthisud and Z.H. Song 2783
Symposium L: Energy Generation, Harvesting and Storage MaterialsFabrication of Solid Oxide Fuel Cells via Thin Film TechniquesY.H. Lee, G.Y. Cho, Y.S. Jee, I. Chang, S.K. Kang, J.H. Lee, J.W. Son and S.W. Cha 2787
Superior Radiation Resistance of ODS Ferritic SteelsR. Kasada, H. Takahashi, H. Kishimoto, K. Yutani and A. Kimura 2791
Thermoelectric Performance of Half-Heusler TiNiSn Alloys Fabricated by Solid-LiquidReaction SinteringY. Kimura, C. Asami, Y.W. Chai and Y. Mishima 2795
dd PRICM7
Broad-Band Vibro-Impacting Energy HarvesterS. Moss, I. Powlesland, M. Konak, A. Barry, S. Galea and G. Carman 2799
Structural Design for the Development of the Floating Type Photovoltaic EnergyGeneration SystemH. Choi, H.J. Joo, J.H. Nam, K.S. Kim and S.J. Yoon 2803
Fabrication of Nanocrystalline TiO2 Films by Aerosol Deposition Method for Dye-SensitizedSolar CellsD.L. Cheng, C.Y. Lin, C.S. Liu, K.S. Kao and C.M. Wang 2807
Variation of Heat Dissipation Properties of LED Packages with Thermal ViasH.S. Lee, H.W. Shin and S.B. Jung 2811
Thermodynamic Characterization on Hydrogen Absorption and Desorption Reactions ofLithium – Silicon AlloyK. Doi, S. Hino, H. Miyaoka, T. Ichikawa and Y. Kojima 2815
Hydrogen Storage in Nitrides by the Use of Ammonia as a Hydrogen CarrierH. Imamura, N. Shimomura, K. Watanabe, K. Tanaka, F. Nakamura and Y. Sakata 2819
Hydrogen Permeation Properties of Pd-Coated Ni37.5Nb27.5Zr25Co5Ta5 AmorphousMembraneH.S. Chin, Y.C. Kim, Y.B. Kim, J.Y. Suh, W.Y. Lee, T.W. Hong and E. Fleury 2823
A New Concept for Alloy Design of Nb-Based Hydrogen Permeable Alloys with HighHydrogen Permeability and Strong Resistance to Hydrogen EmbrittlementH. Yukawa, M. Morinaga, T. Nambu and Y. Matsumoto 2827
Hydrogen Permeation of Pd-Free V-Based Metallic Membranes for Hydrogen Separationand PurificationC.Y. Kim, H.S. Chin, G. Yoo, K.W. Park and E. Fleury 2831
Influence of Temperature on Self-Discharge and High-Rate Discharge Characteristics ofLa-Rich AB5-Based MH Alloy ElectrodeH.Y. Zhou, P.P. Wang, Z.M. Wang, R.P. Zou and C.Y. Ni 2835
Effect of Annealing on the Hydrogen Permeation and Mechanical Behaviour of Nb-Ni-ZrAlloy MembranesT. Wong, Z. Yu, K. Suzuki, M.A. Gibson, K. Ishikawa and K. Aoki 2839
Hydrogen Storage Properties of Mg-Ni Alloy Catalysed by Multi-Walled Carbon NanotubesS. Aminorroaya and H.K. Liu 2843
The Effects of Cryogenic Milling and Catalytic Additives on the Hydrogen DesorptionBehaviour of Nanostructured MgH2C.Y. Seo, X.D. Wu and K. Suzuki 2847
Characterisation of Hydrogen Release Behaviour in Cast Mg-Ni Alloys by SynchrotronXRD and XAFSK. Nogita, M. Jenke, D. Wood, A. Duguid and S.D. McDonald 2851
Hydrogen Exchange Effect in MgH2-LiBH4 SystemL. Zeng, H. Miyaoka, T. Ichikawa and Y. Kojima 2855
Observation of Hydrogen Distribution in a Eutectic Mg-Ni Alloy by the Silver DecorationMethodH. Saitoh and M. Shimpo 2859
Catalysing Effect of Intermetallic Compounds on Hydrogen Desorption Kinetics in CastMagnesium AlloysY.H. Cho and A.K. Dahle 2863
In-Situ TEM Observation for Dehydrogenation Mechanism in MgH2 with CatalystE. Morita, A. Ono, S. Isobe, Y.M. Wang, N. Hashimoto and S. Ohnuki 2867
High Water Diffusivity in Low Hydration Plasma-Polymerised Proton ExchangeMembranesV.K. Peterson, C. Corr, G.J. Kearley, R. Boswell and Z. Izaola 2871
Development of High Power Density Solid Oxide Fuel Cells (SOFCs) for Long-TermOperationN.H. Menzler, W. Schafbauer, F. Han, O. Büchler, R. Mücke, H.P. Buchkremer and D. Stöver 2875
Effect of Flow Fields and Scan Rates on Performance of Micro-DMFCY.H. Lu and R.G. Reddy 2879
Rare Earth Element Aliovalent Doping Substitution and Electrochemical Performance ofLiFe1-x NdxPO4M.S. Zhao and L. Zhang 2883
Materials Science Forum Vols. 654-656 ee
Effect of Dissolved Hydrogen on the SCC Susceptibility of SUS316L Stainless SteelK. Nakagawa, M. Nono and A. Kimura 2887
Joining of ODS Steels and Tungsten for Fusion ApplicationsS. Noh, R. Kasada, N. Oono, T. Nagasaka and A. Kimura 2891
Effects of Chemical Composition on the Impact Properties of A533B SteelsB.J. Kim, R. Kasada and A. Kimura 2895
Resistance to Hydrogen Embrittlement and Behavior of Hydrogen in 6000 Series AluminumAlloysG. Itoh, M. Watanabe, K. Kuroyanagi and P.Z. Zhao 2899
Visualization of Diffusive HydrogenT. Watakabe, G. Itoh and Y. Hatano 2903
Synthesis of Ni-Al Intermetallic Nanoparticle Catalysts by Vacuum Arc PlasmaEvaporationY. Xu, J.Y. Yang, M. Demura, T. Hara and T. Hirano 2907
Neutron Irradiation Hardening of Fe-Based Binary AlloysK. Yabuuchi, M. Saito, R. Kasada and A. Kimura 2911
Evaluation of Irradiation Hardening of Fe-Ion Irradiated F82H by Nano-IndentationTechniquesY. Takayama, R. Kasada, K. Yabuuchi, A. Kimura, D. Hamaguchi, M. Ando and H. Tanigawa 2915
Microstructural Evaluation of Dy-Ni-Al Grain-Boundary-Diffusion (GBD) Treatment onSintered Nd-Fe-B MagnetN. Oono, M. Sagawa, R. Kasada, H. Matsui and A. Kimura 2919
Chemical Property of Ground Calcium Carbonate as Carbon Dioxide AbsorbentS. Yokoyama, M.N. Nik Hisyamudin and S. Hirano 2923
Storage of CO2 in Low Al2O3 EAF Oxidizing Slag by Grinding with Vibration MillM.N. Nik Hisyamudin, S. Yokoyama and M. Umemoto 2927
Fabrication of (Al2O3-Al3Nb)/Al Composite Materials by In-Situ Reaction Using MAProcessed Al/Nb2O5 PowderH.B. Lee, H. Tezuka, E. Kobayashi, T. Sato and K.D. Woo 2931
Symposium M: IOMMMS Global Materials ForumResearch and Development of Nano-Composite Materials for Hydrogen StorageY. Kojima 2935