table of contents - scientific.net filetable of contents sponsors, committees and preface 1. iron...
TRANSCRIPT
Table of Contents
Sponsors, Committees and Preface
1. Iron and Steel
Simulation Research on the Penetration Phenomenon of Long Rod Armour-PiercingProjectile with Different MaterialsW.B. Li, F. Fan, X.M. Wang, W.B. Li and C. Chen 3
Adsorption Behavior of Sulfamethoxazole as Inhibitor for Mild Steel in 3%HCl SolutionG.H. Zhang, L.L. Yin, S.T. Zhang and X. Li 8
Precipitates and Lüders Elongation in Ferritic Stainless Steels Stabilized with Ti and VF. Gao, W.N. Zhang, Z.B. Zhang, Z.Y. Liu and G.D. Wang 16
The Analysis of Temperature Field and Residual Stress Distribution during H-BeamCooling ProcessY. Zang, B. Zhang, L.H. Cui and Z.Y. Gao 20
Research of a Novel Low-Carbon High-Manganese Alloy Containing BoronJ.X. Guo, J.Y. Liu and J. Liu 26
Effects of Mn on the Precipitation Behaviors in High-Nitrogen Austenitic Stainless SteelsF. Shi, Y. Qi and C.M. Liu 32
Fractal Analysis of Raceway Boundary in COREX Melter Gasifier ModelZ.G. Luo, Z.X. Di, Z.S. Zou and R. Chen 38
Corrosion Inhibition of 45# Mild Steel in Acidic Solution by Some NorfloxacinF.R. Xu, S.T. Zhang and X. Li 44
Microstructures and Textures During Annealing in Low Carbon Al-Killed Steels with LowFinishing Temperatures and High Coiling TemperaturesB.C. Wu, F. Shi, X.Y. Cheng, R.M. Lin and C.M. Liu 52
Numerical Simulation for Direct Reduction of Pure Zinc Oxide Pellet Containing CarbonX.W. An, J.S. Wang, X.F. She, Y.G. Ding and Q.G. Xue 56
A New Evaluation Index of Coke High Temperature Properties - Starting ReactionTemperatureX. Zhang, J.L. Zhang and H. Guo 61
Effect of High Magnetic Field on Diffusion Behavior of Carbon in Pure IronY. Wu, Y. Lu, X. Zhao and L. Zuo 67
Synthesis Pathway of Dioxins in Iron Ore Sintering ProcessH.M. Long, J.X. Li, P. Wang and R.F. Wei 71
Effect of Magnetic Field Direction on Texture Evolution in Cold-Rolled IF Steel Sheet at theInitial Stage of RecrystallizationY. Wu, X. Zhao, C.S. He and L. Zuo 75
Atomistic Model of Amorphous Silicon Nitride by Melt-Quench MethodN.B. Liao, M. Zhang, R. Jiang and X. Tao 80
Study on the Recrystallization Behaviour of Hot Deformed Austenite in GCr15 BearingSteelG.Y. Xiong, Y.L. Wang, B.L. He and L.Z. Zhao 84
Microstructure and Properties of 65Mn Steel after Austenite Inverse Phase Transformationby Sub-Temperature QuenchingA.M. Li and M.J. Hu 89
A Study on Microstructure of Ductile Ni-Resist Cast Iron for Exhaust Manifolds andMechanical Property at the Condition of Altermative Thermal CyclesY.L. Yang, Z.Y. Cao, Z.S. Lian and H.X. Yu 95
Preparation of Fe-Cu-Ni-Mo-C Alloy with High Performance by Powder Metallurgy WarmCompactionJ.S. Huang and S. Min 100
Crack Research for Welded Joint of Steel Truss BridgeZ.S. He and J. Liu 104
Synthesis and Dielectric Properties of Ba(Ti,Y)O3 Solid Solutions to Ba3Ti2YO8.5-BaTiO3CompositesM. Huang and Y.W. Wang 109
Hypereutectic Al-Si-Mg In Situ Composite Prepared by Melt SuperheatingZ. Liu and M. Xie 113
The Study of Low-Velocity Impact Characteristics and Residual Tensile Strength of CarbonFiber Composite Lattice Core Sandwich StructuresX.M. Lu, Y.F. Ma and S.X. Wang 117
Simulation of Microstructure and Grain Size in Welding Heat Affected Zone Using MonteCarlo MethodS.X. Zhang and G.Y. Cai 121
Microstructure and Mechanical Properties of Hot-Rolled Low-Carbon Medium-ManganeseTRIP SteelsZ. Li, A.M. Zhao, D. Tang and B.H. Li 127
Synergistic Inhibition Effect of Sodium Silicte and Phytic Acid for Carbon Steel in NeutralSalt WaterH.Y. Ma, S.Z. Yi and Q. Zhang 134
Precipation and Dissolution Behaviours of Secondary Phase in J55 Steel During ContinuousCasting, Conveying and HeatingM.L. Wang, H. Zhang and Z.H. Zhu 139
The Influence of Enamel Firing Process on Microstructure and Mechanical Properties ofSteel SubstrateA.W. Zhang, S.H. Jiao, Z.Y. Jiang, Q.S. Sun and D.B. Wei 144
Characteristics of Hot Ductility and Fracture in Micro-Alloyed Q345B Structural SteelF. Dong, C. Su and Y.Y. Bai 150
Electrochemical and Quantum Chemical Investigations of Tinidazole as Corrosion Inhibitorfor Mild Steel in 3% HCl SolutionL. Zhang, S.T. Zhang and X. Li 157
Effect of Quenching Temperature on Microstructures and Mechanical Properties of Boron-Nickel-Added Nb-Treated HSLA H-BeamsX. Wang, Z.C. Wang, X.B. Wang, X.D. Li, J.Q. Gao, X.L. Zhao and C.X. Dong 165
Melting Temperature of a Selected Area in CaO-MgO-Al2O3-SiO2 Slag SystemJ.F. Xu, J.Y. Zhang, C. Jie, L. Tang and K.C. Chou 169
Effects of Temperature and Strain Rate on Thermal Deformation-Behaviour of Cu-PWeathering SteelX. Zhang and Y. Xiong 175
Experiment Research on Argon Shroud for the Protection of Steel CastingZ.J. Gong, W. Song and Y.L. Ma 179
Study on Thermal Physical and Chemical Properties of Sodium Pyroxenite in BaiyuneboIron OreY.C. Wang, Y.C. Wang, G.P. Luo, G.J. Zhang and Q.B. Lu 185
Effects of Impact Angles on Erosion-Abrasion Properties of Hypereutectic Al-Mn AlloyMatrix Composite Reinforced with Al2O3 ParticulatesB. Liu, X.M. Li, X. Liu and C.Y. Wang 190
Study on Heavy Section Forging Steel for Reactor Pressure Vessel Applying SimulationMethodsX.X. Xu, B.Z. Bai and W. You 194
Effects of Compound Silicate Gangue on Mineral Composition and Microstructure of SinterProduced by Baiyunebo Iron Ore ConcentratesG.P. Luo, S.L. Wu, Y.C. Wang, G.J. Zhang, Z.Z. Hao and H.L. Wu 201
Studies on Technological Parameters of Optimal Soft Reduction about Superwide SlabCasterX.X. Qi, G. Zhang and Q. Jia 207
Effect of Nitrogen on Mechanical Properties of 20MnSi at High TemperatureJ.C. Yang and N. Liu 213
Structure Evolution in Steel Wires During DrawingH.B. Huang, L. Wang and F. Li 218
A Novel Characteristic Method on Fatigue Crack Growth of N80 Casing Drilling SteelD.H. Wang and T.H. Xu 224
b Advanced Engineering Materials
Study on the Durable Factors of the Grain Size in 18CrNiMo7-6 by Heating and CoolingMethodJ.X. Liu, Z.J. He, L.H. Wang, G.P. Feng, Z.J. Zhang and L.P. Qiu 228
Aluminizing Mechanism and Corrosion Resistance of Pipeline Steel X80 by Combined PackCementation Process under Low TemperatureM. Huang, Y. Wang and X.H. Lv 232
Effects of Rare Earths on Structural Transformation of Heavy Rail SteelC.J. Liu, Y.H. Huang and M.F. Jiang 237
Development of Texture and Grain Boundary Character in a Boron Bearing IF Steel afterRecrystallization AnnealingX.L. Song, Z.X. Yuan, J. Jia, L.X. Fan and P.H. Li 243
Discussion on Burden Calculation of Ferromanganese Alloy ProductionS.J. Chu, P.X. Liu and P.X. Chen 248
Effect of Heat Imput on Microstructure and Toughness of High Strength Bridge SteelK.N. Jia 255
Study on Ultrasonic Test Defects Causes of Medium PlateY.L. Chen, H. Yan, B. Hu, S.Y. Ren, R.C. Liu, X.T. Deng and L.Q. Chen 259
Research on the Impact Toughness of Basalt Fiber Reinforced CompositesZ.F. Guo and Z.L. Zhong 263
Study on Characteristics of Ultrasonic Fields by Hydraulic Model of Ladle RefiningS.M. Kang, M.G. Shen, C.w. Li and H. Chen 267
Study on Effects of Pretreatment on Carbide of a Medium-Alloy High Carbon SteelY.M. Dai and Y.Q. Ma 271
The Comparison of Electrolysis Manganese Craft on Stainless Steel and TitaniumJ.H. Tan, H.Y. Chen, S.T. Zhang and Q. Xiang 275
The Influence of Basalt Fiber Orientation on the Mechanical Property of Composite BoardF.F. Zhu, Z.L. Zhong, H.W. Liu and Z.F. Guo 283
Effect of Mold Flux for Casting on Microstructe of Mould PowderL.N. Liu, X.L. Han, C.C. Li and H.P. Yang 287
Study on the Cooling Process of Low Yield Ratio 590-780MPa Grade Steel Plates for High-Rise BuildingsJ. Kang, Z.D. Wang and G.D. Wang 292
Effect of Divorced Eutectoid Transformation Temperature on Behaviour of CementiteGrowth in GCr15 SteelH.B. Yang, F.X. Zhu, X.H. Liu and K.S. Wang 296
Cold Model Study of Raceway in COREX Melter GasifierZ.X. Di, L.H. Han, Z.G. Luo and Z.S. Zou 301
Behaviours of Zinc and Lead in Blast Furnace of Baotou Iron and Steel Group Co.F. Zhang, S.L. An, G.P. Luo and S.Z. Zhang 306
Tensile Strength Statistical Analysis of B610CF SteelB. Xue, T.H. Zhang and R.P. Xu 310
Evolution of Microstructure and Oxidation Layer of 430 Stainless Steel During Hot RollingL.H. Yang, Y.Z. Liu, L.Y. Zhou and L.J. Li 316
Effect of Heat Treatment on the Structure and Mechanical Properties of the Hot-RollingPlate of Fe-42% Ni (4J42)L.J. Li and R.W. Shao 321
Study of the Coefficient of Thermal Expansion for Steel Q235J.X. Fu, X.D. Li and W.S. Hwang 326
Study of Bake Hardenability for Hot Rolling Low Carbon SteelW.J. Li and G.D. Wang 331
Effect of Ultrasonic Treatment Time on Inclusions in High Carbon SteelJ. Lie, C.L. Ge, H.C. Wang, L. Li, Q.X. Rui and G.W. Tang 336
Effects of Applied Compressive Stress on Microstructure and Mechanical Properties of Cr-Mo Steel During Continuous Cooling Bainitic TransformationS.B. Zhang and W.J. Li 341
A Study on Flow Characteristics of Coherent Jet Oxygen InjectorZ.Q. Lv, Q.Y. Ma and X.J. Su 347
Advanced Materials Research Vols. 194-196 c
Investigation on Friction and Wear Property of Al2O3-Sio2(Sf) / AZ91D CompositeG.J. Liu, X.H. Mao, F. Tian and H.R. Zhang 351
Investigation on Aging Behaviour of Al2O3-Sio2(Sf) / AZ91D CompositesG.J. Liu, W.F. Li and J.H. Peng 355
A New Idea for Improving Heat Fade Performance of Organic Based Friction MaterialsG.H. Hou, Z.H. Wang and Y.C. Cui 359
Wear Behaviour of Thermal Spray Welded FeNi and CeO2 Composite CoatingsB.N. Liang, B. Chen, Z.Y. Zhang and P.L. Zhang 363
Effect of Static Magnetic Field on Distribution of Elements in the Fe-S, Fe-Si, and Fe-MnAlloysH.C. Wang, Z.Y. Liao, R.P. Pang, P. Hong, S.J. Wang, J. Lie, G. Wang and M.S. Dargusch 367
Effect of Pulsed Electric Field on the Distribution and Migration of P, S, and Si Elements ofFe-Based AlloysZ.Y. Liao, H.C. Wang, P. Hong, X. Li, J. Lie, S.J. Wang, G. Wang and M.S. Dargusch 371
The Effect of Hot-Rolled Coiling Time on the Texture of a New Cold-Rolled Non-OrientedElectric SteelG.Q. Hu, Y.P. Zeng and H.L. Chen 375
2. Micro / Nano Materials
Physicochemical, Gel Structure and Morphology Properties of Nano Rice Starch Preparedby UltrasoundA.J. Hu, C. Wu, J. Zheng, Z.H. Zhang, Q.X. Chen, R. Liu, X. Liu and Y.M. Wang 381
Facile Preparation of Nanoporous SnO2 for Application in Photodegradation of MethyleneBlueH.J. Wang, F.Q. Sun, M.Z. Ren and Q.W. Guo 385
Preparation of PS@SiO2, PS@TiO2PS@TiO2/SiO2 Core-Shell Composites by a SprayDrying Process and Their Hollow Spheres after Removing PS Cores by CalcinationsL. Li, H.L. Li, Y.C. Zhu, A.P. Fu, Y. Wan and X.S. Zhao 389
Combined Manufacturing Process of Electrochemical-Etching and Electroplating onNanoporous Silicon for its MetallizationJ.C. Lin, M.K. Hsu, H.T. Hou and J.C. Pan 393
Synthesis of Gold Nano- and Microplates by Tryptophan and 5-Hydroxy-TryptophanY.N. Sun, X.Y. Ding, L.N. Du, Z. Jiang, H. Xu, Y.B. Yu, Y. Li and Q.Q. Zhang 397
Influence of Temperature for Synthesis of Carbon Nanofibers from the V-Type PyrolysisFlameY.C. Liu and B.M. Sun 402
Characterization of Protein Powder from Waste Rabbit HairH.Q. Li, J.X. Gong and Y. Zhang 407
Corrosion Behaviour of AISI 304 Austenitic Stainless Steel Fabricated by Equal-ChannelAngular PressingG.X. Chen, Y. Gao, S.H. Wu and J.L. Hu 411
Controllable Assembly of Au Nanorods through Recognition of h-IgG and Anti-h-lgG FabY. Wang, X. Zhou, L.B. Zhong, Y.F. Shi, Y.C. Huang, S.C. Wu and Q.Q. Zhang 416
Magnesium-Based Hydrogen-Storage Materials from Milling for SulfocompoundHydrodesulfurizationS.X. Zhou, M.L. Zhang, H.L. Niu, T.H. Zhang and H.P. Chen 421
Fabrication of Ti2AlN by Mechanical Alloying and Hot Press SinteringJ.F. Zhu, N. Han, K. Wang and F. Wang 425
Electrochemical Synthesis for Uniform and Large-Scale Zinc Oxide Nano Structure FilmsW. Zhang, Y.N. He, W.Y. Cui and C.B. Zhou 429
Study on the Spread of the Energy Gap in Nanostructure SystemJ. Quan, Y. Tian and L.X. Shao 436
Carbon Nanotubes with Uniform Wall Thickness Synthesized Via a Solid-Liquid ReactionC.L. Yin, G.F. Wen, Q.Z. Huang and X.F. Wang 442
Synthesis, Characterization and Gas Adsorption of Titania NanotubesB.F. Leo, K.H. Tan, M.N. Ng and R.J. Mohd 446
d Advanced Engineering Materials
Preparation of Nano-Powders of ITOM.Y. Zhang, L.P. Wang and Q.Z. Huang 450
Research on Ultrafine PTFE Particles with Grease Tribological PropertiesZ.J. Ma, J.H. Yin and Y. Jiang 454
Synthesis of Nanocrystalline TiC1-xNx by High Energy MillingJ.F. Zhu, L. Ye, H. Tong and F. Wang 458
Researching on the Adsorption of Protein on Gold NanoparticlesJ. Yuan, Q.Q. Guo, X.Z. He and Y.P. Liu 462
The Lattice Change of Ni-P Layer Coated on Single-Walled Carbon NanotubesW.X. Li, G. Shi, J.F. Dai and Q. Wang 467
The Acoustic Insulation Property of a New Non-Woven MaterialJ.J. Chen and Z. Guo 471
Fabrication and Characterization of Nanocrystalline NiO Prepared by Sol-Gel ProcessY. Cai, Z.Y. Wu, S.L. Zhao and J.N. Zhu 476
Rapid Fabrication of Cu-Al2O3 Nanocomposition CoatingsJ.S. Chen 480
Preparation and Characterization of Cassava Starch-Chitosan/MontmorilloniteNanocompositesX.Z. Mo, C. Mo, X. Qi and R.H. Li 484
Absorption of Eriochrome Blue Black on Polyaniline/Attapulgite NanocompositesH. Xu, Y. Xu and Y. Chen 488
Synthesis of Type-A Zeolite in Hydrothermal Condition with StelleriteN.C. Chen, Q. Tang, A.P. Deng, W. Wang and X.H. Zhang 492
Synthesis and Characterization of Titanate Nanotubes and Nanowires in a RevolvingAutoclaveX.F. Li, Q.Z. Jiao, Y. Zhao and H.S. Li 497
Large-Scale Patterning and Assembly of Carbon Nanotubes by Microfluidic HydrodynamicFocusingM. Liu, Y. Peng, Q.Q. Guo, L. Jun and J. Yang 503
Engineering of Soybean Extract Powder: Identification, Characterisation and StabilityEvaluationP. Sobharaksha, R. Indranupakorn and M. Luangtana-Anan 507
Preparation, Characterization of Nanoscale Zero-Valent Iron and its Application in CokingWastewater TreatmentX. Zhang, S.Q. Li and K. Ayijamali 511
Fabrication of the SnO2/Al2O3 Catalysts through ElectrospinningL. Cui, Q.X. Li, W.M. Kang and B.W. Cheng 515
Electromagnetic Characteristics and Microwave Absorption Properties of CNT CompositeM. Zhang, H.Y. Zhang and G.X. Zeng 520
Influences of Nd3+ Ions Substitution on the Structure and Electromagnetic Properties of theNanocrystalline Co0.5Zn0.5Fe2O4 FerriteR.T. Ma, S.K. Chen and G. Zhang 524
Ni-Al2O3 Nanocomposites Electroforming Process under Ultrasonic and AgitationW.N. Lei, B. Jiang, W.Q. Liu and X.X. Wang 529
Study the Relative Permeability of Ferrofluid with the Mean Value Analysis ofExperimental Apparent GravityJ.E. Ho 533
Effect of Edge Activator on Characteristic and in Vitro Skin Permeation of MeloxicamLoaded in Elastic LiposomesS. Duangjit, P. Opanasopit, T. Rojanarata and T. Ngawhirunpat 537
Development of Chitosan Nanoparticles for Gene Delivery Using ElectrohydrodynamicSpraying TechniquesO. Paecharoenchai, T. Suksamran, T. Ngawhirunpat, T. Rojanarata and P. Opanasopit 541
PbSe Nanocrystals Synthesized by an Ultrasonic Electrochemical MethodW.R. Feng and H. Zhou 545
A Hollow Microneedle Carrier for Enhancing Skin Penetration of Large MolecularCompoundsN. Wonglertnirant, T. Ngawhirunpat, P. Opanasopit, H. Todo and K. Sugibayashi 549
Advanced Materials Research Vols. 194-196 e
Corrosion Behaviour of Ultra-Fine Grain Chromium Bronze Prepared by Equal-ChannelAngular Pressing in Nacl SolutionY.N. Zhang, C.Z. Xu, M.S. Zheng and J.W. Zhu 554
Preparation and Characterisation of TAM-PLGA Microspheres by Solvent EvaporationS.B. Li, X.M. Xue, Q.M. Zhang, Y.L. Liu, Z.H. Ma, H.L. Nie, L.M. Zhu and L.Y. Du 558
Synthesis of High Surface Area Porous Silicon Carbide by a Modified Sol-Gel MethodD.H. Wang and X. Fu 562
Self-Supporting Honeycomb Films of Polyphenylene Oxide Fabrication andCharacterizationH.W. Chen, X.P. Shang, W.Q. Zhang and D.Y. Zhang 566
Investigation of Nano-Powders Made by Spark Discharging ReactionS. Zhou, S.Q. Zhou, K.C. Mak, Q. Liu, M.L. Zhong, B. Li and Z.Z. Zhang 571
Sputtering Phenomena of ZnS Nanoparticles with Graphite Sheaths by Impacting of High-Energy Electron in a Transmission Electron MicroscopeK.J. Zhang, Y.P. Tong, X.H. Liu and X. Wang 576
Study on Design for Remanufacturing Facing Total Remanufacturing ProcessJ.K. Yao, S. Zhu, P.Z. Cui and X.J. Shi 581
Preparation Principle and Crystal Growth Kinetics of Loaded Nanocrystal TiO2Y.N. Zhao and W.L. Zhang 585
Synthesis and Field Emission of ZnO Bundles with High Aspect Ratio by Solution MethodJ. Liu, A.X. Wei and H.Y. Zhang 589
Carbon Nanotube Templated Growth of the Nano-Crystalline NaY ZeoliteK. Tang, X. Hong and J.G. Qi 594
Fabrication of Large-Area Silicon Nanowire Arrays Based on Electroless Metal DepositionX. Liu, L.J. Zhao and P. Feng 598
Technological Properties of Poplar Particle/Waste Rubber Powder CompositesS.Y. Xin, Y. Cui, M. Xu and J. Li 602
Effect of Additive on Microstructure and Property of Bulk Nanocrystalline Co-Ni AlloysPrepared by JEDG.Y. Qiao, T.F. Jing, F.R. Xiao and L.N. Sun 606
Coagulation Method for Preparing Antimony-Doped Tin Oxide (ATO)/Poly(methylMethacrylate) Nanocomposites and their Electrical Conductivity and Thermal StabilityB.H. Dong, T. Jiang, Z.X. Xu, H.B. Lu and S.M. Wang 610
Preparation and Photoluminescence Properties of Tadpole-Like Amorphous SilicaNanowiresZ.F. Ni and Y.G. Wang 614
Optical Studies on Multiwalled Carbon Nanotubes via Modified Wolff-Kishner ReductionProcessK.H. Tan, B.F. Leo, M.N. Ng, R. Ahmad and R.J. Mohd 618
Preparation of Coral-Like α-Fe2O3 Nanostructures and Magnetic PropertiesH. Wang, M. Gong and J.Y. Zhang 625
Effects of Solution Parameters on Morphology and Diameter of Electrospun PolystyreneNanofibersT. Nitanan, P. Opanasopit, P. Akkaramongkolporn, T. Rojanarata and T. Ngawhirunpat 629
One-Step Wet Synthesis and Characterisation of Hydrophobic Magnesium HydroxideJ.Z. Xu, T.T. Tang and H.Q. Qu 633
Facile Fabrication of Single Crystalline Fe3O4 Nanorods and its Magnetic PropertiesG.L. Li, X.M. Liu and W.D. Yin 638
Preparation of Composite Conductive Microspheres Used in Anisotropic ConductiveAdhesive FilmsJ. Ma, H. Gao and X. Chen 643
Fabrication and Characterization of Chitosan-Ethylenediaminetetraacetic Acid/PolyvinylAlcohol Blend Electrospun NanofibersN. Charernsriwilaiwat, P. Opanasopit, T. Rojanarata and T. Ngawhirunpat 648
Preparation of Nicob/SiO2 Nanoalloy Catalysts and their Catalytic HydrogenationPerformanceC.H. Du 652
f Advanced Engineering Materials
Influence of Sintering Temperature on Densification and Microstructure of Zn3Nb2O8Ceramics Derived from NanopowdersP. Pakawanit and S. Ananta 656
Rapid Preparation of V2O3 and VN Nanocrystals by Ammonolysis of the PrecursorVOC2O4•H2OH. Lin, B.W. Tao, Q. Li and Y.R. Li 660
Appropriate Conditions for Preparation of Nanosized WO3 through High-Energy-MillingC.H. Chen and R.M. Ren 665
The Tribological Properties of PA6/UHMPE Blended Short Carbon Fiber Nanoclay FilledNanocompositesJ. Li and C.L. Cai 669
Analysis the Structure Parameters of the SOI Rib WaveguideX.W. Shen, X.Z. Sang, C.X. Yu, J.H. Yuan and C. Jin 674
Spin Polarized Transport through Structures Consist of the Ferromagnetic Semiconductorin Presence of a Inhomogeneous Magnetic FieldZ. Bamshad 679
Surfactants-Controlled Morphosynthesis of Strontium CarbonateC. You, Q. Zhang, Y. Zhao and Q.Z. Jiao 683
Preparation of ZnO Nano-Suspension and its Antibacterial Effect on Escherichia ColiX.H. Li, Y.Q. Jiang, Y.H. Jiang, W.L. Li and Y.L. Ding 689
Hydrothermal Preparation and Formation Mechanism of ZnSn(OH)6 Cubic Aggregatesand Zn2SnO4 OctahedraL.X. Yang, J.Y. Liu, P.J. Zhang, Y.X. Yang, P. Yin, X.P. Jiang, L.F. Qin and Y.Y. Tang 693
Effects of Process Conditions on Properties of Nano-Magnetic FluidB. Chen and Y.G. Fan 700
Synthesis and Characterization of Pyrochlore Lead Zinc Niobate Nanopowders Derivedfrom Zn3Nb2O8 PrecursorP. Pakawanit and S. Ananta 704
Synthesis, Characterization and Optical Properties of a Novel Piperazine DerivativeMicrocrystalC.S. Ruan, Y.L. Wang, M.L. Zhang and B.B. Zhang 708
Microstructure and Microhardness of Copper Subjected to High Pressure TorsionZ.L. Xie, L.Z. Sun, F. Yang and X.B. Li 712
Study on Pore Structure and Sulfur Fixation Characteristics of Alkali Industrial WasteG.J. Zhao, F.J. Yin, J. Li and X.Y. Li 716
Thermo-Responsive Dispersion of Multi-Walled Carbon Nanotubes Modified with Poly(N-Isopropylacrylamide-Co-Acrylic Acid)Y.L. Xiao, G.Y. Duan, G.R. You and X.D. Zhao 722
Spunbonded Nonwovens Made from Segmented Pie FilamentsZ.M. Lu and X.M. Qian 726
Fabrication of Flake-Shaped Core-Shell Micro Particles by Way of Thermal Decompositionof Pentacarbonyl Iron on Diatomite SurfaceW.Q. Zhang, D.Y. Zhang and J. Cai 730
Synthesis and Antioxidant Activity of Resin of Chitosan Cerium Encapsulated Green TeaExtract MicrospheresL.N. Yu, D.F. Wang, Q.L. Yang, H.Y. Li, B.J. Liu and Y. Xu 734
Fabrication of Micro-Silicon Filter and Separating of Blood CellsX.Z. Wang and C.H. Wang 742
Carbon Nanolines Grown on Carbon Cloth Prepared by a Two-Step MethodC.L. Yin, G.F. Wen, Q.Z. Huang, P. Zhou, L.M. He, J.L. Liang and B.R. Liu 747
Synthesis of Nano-Strontium Titanate Immobilised on the Silica Gel G and its Applicationin Removal of Heavy Metal Ions from WaterD. Zhang and Y. Cheng 751
Synthesis and Characterisation of Bicone-Shaped and Monodispersed Nanoparticles ofCu2SM. Yang and K. Zhou 755
Research on Cement Pulverized Admixture of Waste Concrete PowderF. Tian, X.S. Xie and W.X. Hu 759
Advanced Materials Research Vols. 194-196 g
Preparation of Porous Nano-Strontium Titanate and its Application in Removal of HeavyMetals from Environmental WaterD. Zhang and Y.L. Zhang 765
A Facile Method for Fabrication Zinc Oxide Nanoparticles with Green-PhotoluminescenceZ.B. Xu and Y. Wang 769
Preparation and Characterization of Thermo-Sensitive HydroxypropylmethylCellulose/Poly (N-Isopropylacrylamide) HydrogelY.L. Xiao, C.C. Xia, G.Y. Duan and X.D. Zhao 773
Dihexadecyl Phosphate-Assisted Synthesis of Unusual Calcium Carbonate MicrospherulesX.H. Liu, H.X. Bai and Y.F. Sha 777
Characterization of Well-Dispersed CeO2 Nanoparticles Prepared by a New Method ofReverse MicroemulsionF.M. Feng, J.Q. Xie, L.K. Zou and B. Xie 781
Hydrothermal Synthesis and Characterization of Novel MoS2 Nanoflowers Directed byIonic LiquidB. Dong, Y.M. Chai, Y.Q. Liu and C.G. Liu 785
The Effect of Biology Activity on WS during Anaerobic DigestionD.S. Bi and X.P. Guo 790
Solvothermal Synthesis of Cd1-xZnxS (x = 0-1) Nanorods Using Single-Source MolecularPrecursorsH. Chen, W.W. Chen, Y.C. Zhang and M. Zhang 794
Leaching Behaviour of Heavy Metals from the Class C Fly Ash-Based GeopolymersX.L. Guo and H.S. Shi 798
Effects of Bentonite Clarificants on Organic Acids Contents in Red Wine duringClarificationZ.S. Wu, X.F. Sun and C. Li 802
3. Building Materials
Performance Tests of Surface Burning for Firestop MaterialsS.F. Kao, Y.S. Wu, C.J. Huang and T.M. Kuo 809
Preparation and Charcterisation of PSt/GMA/DVB Microspheres by Soap-Free EmulsionPolymerizationH.B. Liu 813
Petal-Like Morphology on the Surface of Porous Anodic AluminaY. Song, Q.M. Ye, P. Liu, J.J. Hu and X.H. Zhu 818
Influence of Fly Ash on Crack Resistance of Mass ConcreteJ. Wang, S.H. Liu and W. Yang 825
Application of an Anisotropic Material of Thermal Conductivity in Building EnvelopeS.Y. Su, J. Chen and C.Z. Zhang 829
The Concrete Structure Strengthen Technology and Engineering ApplicationJ.H. Li 835
A New Fatigue Strength Measuring Method of Steel Bar in ConcreteX.N. Peng and W.W. Lan 840
Study of Rubber Asphalt Modification MechanismX.F. Wang 844
State of the Art of Constitutive Model of Concrete Materials Based on Damage MechanicsD.X. Zhang and Q.Y. Wang 848
Setting Behaviour of Phosphate CementZ.H. Li, H.F. Gao, S.R. Feng and C. Su 853
Experimental Investigation into the Impact of Polypropylene Fibers and SRA on the EarlyCrack Resistance of ConcreteX.S. Xie, F. Tian and Y.H. Hong 858
The Application of Carbon Fiber Reinforcement in Tunnel Second Lining CracksC.Z. Yang, Y.J. Wang and Y.L. Chen 865
The Analysis on the Mechanical Property and Durability of Carbon Fiber ReinforcedConcreteS.Q. Cao, X.F. Xin and M. Yang 869
h Advanced Engineering Materials
In Situ Observation Microstructure Character Changes in the Carbonation Process ofHardened Cement Paste Using ESEM/EDSJ.D. Han, G.H. Pan and W. Sun 873
Synthesis and Characterisation of Tb4L3(Phen)0.75•7H2O NanorodsH.J. Ren, Z.F. Cui, D.H. Sun and G.Y. Hong 878
The Function Study of TiO2 Catalysts on Zinc Air BatteryC.S. Zhou, P.X. Zhu and J.X. Guo 882
Electromagnetic Shielding Effectiveness of Cement Based Materials with Scrap Tires Wire -FeCuNbSiB Amorphous Alloy PowderS.W. Huang, X.S. Yi, G.H. Chen, M. Deng and M.S. Tang 886
Slag-Clay Foam Cement as Roof Material for Passive Evaporative CoolingX.Q. Tan and L.J. Wang 890
Experimental Research on the Mechanical Parameters of Frozen Pipes under LowTemperatureD.W. Li, H.Y. Liu, J.H. Fan, R.H. Wang and B.J. Luo 895
Research on the Pore Structure of Alkali-Slag Cement Stone Activated with Water GlassJ. He and C.H. Yang 899
Influences of Environment Climate Conditions on Concrete Carbonation RateG. Li, Y.S. Yuan, X. Liu, J.M. Du and F.M. Li 904
Study on the Hydraulic Conductivity of Sand-Bentonite mixtures used as Liner System ofWaste LandfillS.F. Xu, Z. Wang and Y. Zhang 909
Numerical Simulation of The Drying Shrinkage Process of ConcreteY.C. Zhang and Q.N. Li 913
The Frost Model of Concrete in the View of Damage MechanicsD.F. Pan, Y.F. Qiao, C.S. Sun and X.B. Liu 919
Effect of Ground Phosphate Slag on the Resistance to Chloride Ion Penetration of ConcreteJ.X. Ye, Y.J. Wang, S. Zhao, M.C. Yang and C.H. Yang 924
Simulation of Fracturing Process for Heterogeneous Material under Uniaxial CompressionG.S. Su, G.Q. Chen and H.F. Zhou 930
A Study of Interfacial Transition Zone in Lightweight Aggregate ConcreteH.J. Chen, C.K. Lin, W.P. Tsai and T.H. Liu 935
Effect of Fly Ash on the Workability of Nondispersible Underwater ConcreteJ.S. Niu and X.W. Ma 942
Effect of Pore Structure of Sandstone on Hydrophilic CharacteristicisL. Zhou 947
Photoinitiated Emulsion Polymerization of P(MMA-co-DVB) Microspheres with LowPower Ultraviolet LightL.J. Tao and F.Q. Sun 952
Study on Interfacial Properties of Ultra-High Performance Concrete Containing Steel SlagPowder and Fly AshY.Z. Peng, K. Chen and S.G. Hu 956
Preparation and Characterisation of a Compatilizer of PP-RTV BlendsY.M. Sun, H.A. Li and M. Li 961
Carbon Sequestration Analysis of Wood Construction ArchitectureS.Y. Yu, H.Y. Tan, X.L. Weng and M. Xu 968
3-D Numerical Modelling of Mesoscopic Configuration and Cracking of ConcreteL.S. Hu and S.F. Chen 972
Numerical Simulation of Temperature and Creep of Concrete Surrounding Spiral Case in aHydraulic PlantX.Y. Xu, Q.S. Luo and Z.Y. Ma 977
Material Test on Aluminum Alloy Round Pipe for Building StructureY.T. Gao and X. Hu 981
The Experimental Study on Strength of Subgrade Soil Treated with Liquid StabilizerO. Ou, X.G. Zhang and N.P. Yi 985
Comparative Study on Crack Width Prediction for Concrete Flexural Members with GFRPReinforcementJ.Y. Cai, Y.Y. Liu, X.L. Wang, J.L. Xiong, H.X. Wan and Z.F. Tu 989
Advanced Materials Research Vols. 194-196 i
Study on the Influence of Chloride Ion Content on Pavement Performance of Base Materialwith Fly-Ash-Flushed-By-SeawaterL.S. Bao, X.F. Zhang, L. Yu and G.S. Zhu 993
Microscopic Mechanism Study on Carbonation Resistance of Recycled Aggregate ConcreteH.F. Yang, Z.H. Deng and X.L. Li 1001
Influence of Cement Particle Size Distribution on Strength of Cement PasteB.L. Zhu, X. Huang and Y. Guo 1007
Prognosis of Alkali Aggregate Reaction with SEMX.Y. Zhang, E. Gallucci and K. Scrivener 1012
A Study for Substituting Part of Raw Materials by Bottom Ash in Portland CementH.M. Hsu, H.H. Chen, S.J. Chao, A. Cheng, C.Y. Wu and C.T. Ma 1017
Properties of the Mortar Modified with the Styrene-Acrylic EmulsionS. Zhang, G.Z. Li and C. Ning 1022
Study on Mechanical Properties of Soda Residue / Fly Ash Composite CementitiousMaterialB.J. Li and G.Z. Li 1026
Experiments for Strength Properties of Polypropylene Fiber-Reinforced ConcreteX.R. Shao 1030
Mechanism of Preferential Adsorption of Carboxylic-Vinyl Copolymer, HydroxyCarboxylate and Sulfonation - Polyol in Cement Hydration ProcessH.B. Tan, B.G. Ma, K. Ke and J. Xiao 1035
Triaxial Shrinkages Tests of Unsaturated Compacted ClayD.L. Wang 1041
Experimental Study on Relationship between Saturation Degree and Void Ratio ofRemolded Soils on Drying PathD.L. Wang 1045
Experimental Investigation Properties on Resistance of Slag Cement Concrete to SulfateAttackJ. Wang and Z.J. Zhang 1049
Research on Mechanical Property of Single Panel Fire-Resistant Glass with Cs+ Ion andRb+ Ion ExchangeQ. Wang, Z.Y. Ding, J. Da, J. Zhang and Z.T. Sui 1053
Effects of Adhered Mortar Content on Quality of Recycled Coarse Aggregate of ConcreteH.Z. Quan 1059
Experimental Research on New Concrete Air Entraining AgentB.M. Wang and N. Tu 1063
Research on Application Technology of TLA Modified Asphalt MixtureX.J. Feng and X.D. Zha 1069
Mechanical Property of Solidified Concrete by Explosion as Concrete is in Flow PatternH.L. Wang, Z. Cui, C. Li and R.C. Bao 1073
Preparation of Potato Starch Graft Copolymer and its Application in Functional CoatingsM.L. Jiang, J.F. Guo, R.M. Wang, Y.F. Zhu, X.W. Wang and Y.F. He 1077
Research on Moisture Porosity Test of Explosive Lining Materials after Long-Term WaterImmersionH.L. Wang, L.Z. Meng, Z. Cui and S.X. Li 1081
Effect of Gypsum on Strength Development of Steam-Cured ConcreteZ.M. He, X.J. Shen and J.Z. Liu 1085
Research on Performance of Cement Stabilized Skeleton-Dense Structure Aggregate BaseCourse MaterialL.Q. Hu and A.M. Sha 1089
Mesoscopic Thermal-Mechanical Fire Damage Modeling of High Performance ConcreteJ. Zhao, J.J. Zheng, G.F. Peng and K. van Breugel 1095
SEM and XRD Investigation on Mechanism of Expansion and High-Early-Strength of aCementitious Composited Grouting MaterialG.C. Sang, H.B. Zhang and Y.Y. Zhu 1099
Basalt Fiber Reinforced ConcreteY.X. Yang and J. Lian 1103
j Advanced Engineering Materials
Experimental Study on Dynamic Mechanical Behaviour of Concrete with HighTemperatureB. Jia, Z.L. Li, L. Cheng and H.C. Yao 1109
Experimental Research on Performance of Anchorage of Planting Rebars with InorganicMaterial in ConcreteH.Q. Luan 1114
Research Status and Prospects of the Smart ConcreteJ. Sun and W.X. Ding 1118
Preparation and Properties of New Polycarboxylate-Type SuperplasticizerS.H. Lv, R.J. Gao, J.P. Duan, X.L. Yan and M.M. Hou 1122
Researches and Application of Railway Wind-Break WallB. Li, S.H. Feng, Q.S. Yang and Y.W. Hou 1126
Impact Strength Test and Numerical Fitting of Plybamboo FormY.S. Yu, B.G. Li and W.H. Zhou 1130
The Status and Development of New-Type Wall MaterialD.L. Jiang, J. Zhao and G.W. Ni 1134
The Study on the Properties of Super Absorbent Polymer in Expansive ConcreteL.F. Pang, Y.T. Cai and Q.S. Chang 1138
Effect of Particle Size on Expansive Behaviour of MgO-Based Expansive Agent in CementPasteZ.B. Zhang, L.L. Xu and M.S. Tang 1143
Experimental Study on the Bending Resistance Performance of GFRP Tube Filled withSteel-Reinforced High-Strength Concrete Flexural ComponentL. Zhou, L.G. Wang, S. Li and H.T. Liu 1147
Calculation of Flexural Capacity of SRC Beams Strengthened with CFRPX.C. Wang, X.X. Liu, L. Zhou, H.T. Liu and M. Yang 1154
Reliability Research of RPC Low-Height T-Beam in Railway BridgeT.Y. Zhong, M.B. Zhang and W.Q. Wang 1160
Shear Lag in Thin-Walled Box Girder with Variable SectionY.H. Zhang, Z.J. Yang and S.Z. Liu 1165
Properties of Recycled-Cement Produced from Waste ConcreteH.M. Ai, J. Wei, J.y. Bai and P.G. Lu 1170
Determination of Tensile Strength of Compacted Loess by Double Punch TestX.J. Li, Y.R. Liu, L.H. Jiang and Y.C. Tang 1176
4. Metal Alloy Materials
Enhancing the Toughness of Heavy Thick X80 Pipeline Steel Plates by MicrostructureControlW.J. Nie, W.F. Xin, T.M. Xu, P.J. Shi and X.B. Zhang 1183
Effect of Ultrasonic Power on the Microstructure and Hardness of Commercially PureAluminumH.C. Wang, D. Liu, Z.Y. Liao, M. Li, J. Lie, G. Wang and M.S. Dargusch 1192
Recent Developments for Isochronal Transformation Kinetics Model and their ApplicationsY.C. Liu, L.F. Zhang, X. Yang and D.J. Wang 1197
The Kinetics of the Austenite-Ferrite Phase Transformation of Fe-4Cr Alloy duringContinuous CoolingL.F. Zhang, D.T. Zhang, Z.S. Yan and Y.C. Liu 1203
Plastic Strain Energy in Low-Cycle Fatigue of A356 (Al-7Si-0.4Mg) Aluminum AlloysM.S. Song and M.W. Ran 1210
Microstructures and Hardness of Silver Alloys after Internal Oxidation ProcessK. Wathanyu and S. Rojananan 1217
Effects of Erbium Addition on the Corrosion Resistance and Microstructure of AZ91Magnesium AlloyZ.J. Wang, Y. Xu and J. Zhu 1221
Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties ofCr20Ni32AlTi AlloyC.C. Yang, Y.L. Kang, S. Qin and L.X. Wang 1225
Advanced Materials Research Vols. 194-196 k
Study on Interaction between Cerium and ArsenicJ.Z. Zhang and S.T. Dou 1231
Flow Stress Behaviour of TWIP Steel during the Hot Compression DeformationQ. Liu, D.J. Li, F. Shangguan, Y.R. Feng and K. Tong 1235
Discussion on Relationship between Viscosities of Molten Zr-Cu Based Alloys and theirGlass Forming AbilityJ.S. Wang, L.J. Cao, J.H. Wang, H.Y. Sun, S.Y. Huang and Q.G. Xue 1242
Forecast and Analysis of Transformation Point of TC6 Titanium AlloyM.C. Yin, T. Gao and E.Z. Chen 1247
Effect of Cr and Zr Addition on the Corrosion Behaviour of Copper in the ChlorideSolutionY.N. Zhang, M.S. Zheng and J.W. Zhu 1253
Effect of High Pressure Heat Treatment on Microstructure and Corrosion Resistance ofBrassY.W. Liu, L. Liu, W. Zhang, J.H. Liu, G.R. Peng and R.J. Zhang 1257
The Influence of Deformation on Dechromization Corrosion of CuCr Alloy in H3PO4SolutionsY.W. Liu, W. Lu, J.Z. Song, J.H. Liu and R.J. Zhang 1261
Effect of Element Re on Creep Behaviour of a Single Crystal Nickel-Based SuperalloyH. Liu, M.G. Wang and S.G. Tian 1265
Microstructure and Properties of Cu-17Fe Alloy Aged Treatment in High Magnetic FieldK.M. Liu, D.P. Lu, H.T. Zhou, S.F. Wen, S.Y. Wei, Q. Hu and Z.Z. Wan 1270
Characterization of Precipitates in Bend-Age-Formed 2124 Aluminium AlloyL.W. Quan, G. Zhao, Y. Liu, N. Tian and T. Peng 1275
Effect of Composition and Temperature on the Formation of Delta Ferrite in the Billet forP92 SteelH.M. Jing, B. Wang, D.S. Xiong, Y.G. Xu, J.J. Wang, P.Z. Wang, G.H. Liu and Y. Zhang 1280
Effect of Trace Boron on Microstructure and Mechanical Properties of Ti-9V-3Al-3Cr-3Zr-3.5Mo AlloyX.L. Liu, Y.Q. Ma, S.Y. Yang, Y.N. Wang, C.P. Wang and X.J. Liu 1287
Analysis of the Valence Electron Structures of the Strengthening Phases Al8Fe4Ce andAl4Ce in Al-Fe-Ce AlloyH. Qu, W.D. Liu and Y.Y. Liu 1291
Effect of Sr + RE Combination Modifier on Microstructure and Mechanical Properties ofAl-40 Wt Si AlloyX.S. Li, W. Hu, A.H. Cai, H. Chen and Y. Zhou 1296
Microstructures and Properties of Cu-Cr-Y Alloy after Cold Worked and AgingS.H. Guo, M. Zhang, G.Y. Peng and J.C. Tang 1301
Hot Corrosion of Cobalt-Based Alloy with (Na, K)2SO4 Coating at 900 °CG.Y. Fu, X. Zhao, Q. Liu and Y. Su 1305
Mechanism of the Flux Improving the Microstructure and Mechanical Properties of AZ91DMagnesium AlloyZ.X. Wang, Y. Liu, Y.T. Le and F. Liu 1309
Effect of Temperature on Recrystallisation Texture and Microstructure for Non-OrientedSilicon Steel under Asymmetrically Rolling Process16Z.G. Zhang, Y.D. Liu and F. Wang 1314
Influence of Yttrium and Heat Treatment on Microstructure and Mechanical Properties ofAM60 AlloyZ. Tian, Z.Y. Cao and J. Meng 1319
Study on the Thermal Fatigue Resistance of Cr17Mn10Ni3 Heat-Resistant SteelJ.Y. Liu, J. Liu, Q.h. Zhao and J.X. Song 1326
Numerical Simulation of Surface Hardened Layer of the Hydraulic TrackR.B. Bai, F.S. Liu and Z.M. Xu 1333
Effects of Two-Step Aging Temperature on Exfoliation Corrosion of an Al-Zn-Mg-Cu AlloyX. Chen, Z.Y. Liu, L.H. Lin and S. Bai 1338
The Influence of Thermomechanical Treatment on the Microstructure and Properties of aWrought Al-Mg-Si AlloyJ. Man, L.L. Yang, C.F. Xia, G.J. Shao and M. Jin 1342
l Advanced Engineering Materials
Effect of Ni on Characteristics and Structure of Aluminium BrassW. Cai, Z.Q. Hu and H.F. Liu 1347
Recrystallisation Behaviour of Cu-20Ni-5Sn AlloyR.Q. Liu, L.J. Peng and J.S. Yang 1352
Characterization of β′ Precipitate Phase in Aged Mg-12Gd-2Y-0.5Sm-0.5Sb-0.5Zr AlloyK.J. Li, Q.a. Li and X.H. Zhang 1357
A Study on Corrosion of Cast-On-Strap AlloysA.J. Li, H.Y. Chen, L.C. Dou, H. Wang and W. Zhang 1361
Displacement Based Seismic Design Method of RC Frame with Friction DampersC.L. Fan and H. Ji 1365
Effect of Ca on Microstructure and Properties of Mg-Al-Si AlloysC.X. Xu, H. Ju and Y. Zhou 1369
Effects of Sb on Microstructure and Mechanical Properties of Mg-5.5Al-1.2Y AlloyC.Q. Li, Q.a. Li, X.Y. Zhang and Q. Zhang 1374
Solid Solution Strengthening of Sm in Mg-10Y-1.5Sm AlloyQ. Zhang, Q.A. Li, X.T. Jing and C.Q. Li 1378
5. Composites
Preparation and Characterisation of Al/Pb Layered Composite MaterialsS.G. Zhou, P.X. Zhu, Y. Sun and L.D. Sun 1385
An Analytical Method for 3-Phase Model of Electro-Magneto-Elastic Fiber Composites withPeriodically Distributed Reinforced PhasesY.L. Xu and H.L. Hou 1389
Sensitivity Analysis of Static Response for Composite Laminated Plates in Hamilton SystemJ.X. Xu and D.H. Li 1396
Meshless Method with Radial Basis Functions for Hamilton Canonical EquationD.H. Li, C. Dou and J.X. Xu 1407
Study on Manufacture Technology and Mechanical Properties of Three DimensionalBraided Composite Support with Irregular ShapeY. Sun, J. Yang, Y.H. He and J.L. Li 1417
Thermomechanical Properties and Morphology of Liquid Crystalline Polyurethane/EpoxyResin CompositesJ.F. Ban, S.R. Lu, D. Guo, K. Liu and C.X. Luo 1421
Recent Progress on Carbon Coated Lithium TitanateY.M. Zhu, H.L. Hu and W. Weppner 1426
Preparation and Characterisation of Konjac Glucomannan (KGM)/SiO2 NanoparticlesBlend FilmC. Wang, B.J. Xie and B. Li 1431
Effects of Particle Size and Volume Fraction on Extrusion Texture of SiCp/Al Metal MatrixCompositesC.L. He, J.M. Wang and Q.K. Cai 1437
Experimental Research and Regression Analysis for Constant Temperature Drying ofWheat StrawJ.J. Hu, Q.G. Zhang and H. Huang 1442
Experimental Investigation on First Crack Strength and Crack Widthof ReinforcedConcrete Beamsby Side-Bonding CFRP SheetsG.B. Li, X.Y. Sun and Y.G. Guo 1449
The Stability Research of Montmorillonite/Octadecyl Trimethyl Ammonium ComplexesJ. Qiu, X.J. Lu, L.J. Sun, G.F. Wang, P. Li and Z.W. Zhang 1453
Preparation and Flame Resistance of Hydrotalcite/Epoxy Nanocomposites Containing RedPhosphorousY.T. Zhang, Y.W. Zhang, H.Q. Zhang and J.D. Liu 1460
Pressureless Sintering and Properties Investigation of Silicon NitrideB. Li, Y. Feng, H.Q. Liu, Y.F. Zhu, D.B. Yu, X.B. Zhang, X.B. Pan, J. Tu, X.P. Ouyang, L.Z.Cao and H.C. Wu 1464
Study on the Natural Fiber/pp Wrap Spun Yarns Reinforced Thermoplastic CompositesL. Zhang, G. Huang and Z.Z. Liu 1470
Advanced Materials Research Vols. 194-196 m
Effect Of PP-G-MAH on the Compatibility of Lignin/LDPE CompositesX.Y. Lv, Y.H. Zhang and M.W. Di 1476
Study on the Characterisation and Photocatalysis Reactivity of TiO2/Cu CompositeParticlesB. Wang, J. Yan, S.G. Du and H.P. Cui 1480
Manufacture and Testing of a Moderate Size Integrated Marine Composite PropellerX.D. He, H.M. Zhang, R.G. Wang and Y. Hong 1485
Study of the Structural Design and Capacitance Characteristics of Fabric SensorR.Q. Zhang, J.Q. Li, D.J. Li and J.J. Xu 1489
Separable K-Canonical Formulation of Rectangular Element and Symplectic IntegrationMethod for Analysis of Laminated PlatesG.H. Qing, L. Wang and L.Z. Shi 1496
Rheology and Thermal Properties of Polypropylene/Poly(phenylene Sulfide) MicrofibrillarCompositesH. Wang, J. Guo and X.Y. He 1506
Preparation and Characterisation of Polyaniline Grafted Multiwalled CarbonNanotubes/Epoxy CompositeJ. Xu, S. Ren, Y. Wu, J.G. Li, M. Li and Y. Guo 1510
Thermodynamics on Formation of Condensed Phases during CVD Si3N4 Process with Sicl4-NH3-H2 PrecursorsJ.L. Deng, L.F. Cheng, Z.L. Hong and K.H. Su 1516
The Effects of Particle Size-Matching Filling of Spherical Silica on the Flowability of EpoxyMolding Compounds for Large-Scale Integrated Circuits PackagingM.S. Yang, L.K. Li and Y. Liu 1524
Preparation and Characterisation of Wool-Keratin Films Based on SMS NonwovensJ.Q. Li, R.Q. Zhang, X.J. Zhou and D.Q. Li 1529
Effects of Wood Powder on Mechanical Properties of PP/Wood Powder CompositesC.B. Yu, Y.Y. Rui, S.S. Chen, X. Lv and X.L. Lv 1536
High Quality Al2O3-ZrO2-C Slide Gate Properties Adding Si-Fe Sintered by both Nitrogenand Carbon Monoxide AtmosphereL. Liu, Y. Li, Y.W. Zhai, W.D. Xue and J.H. Chen 1542
Study on High Performance Fe3Si-Si3N4-SiC Composite Preparation and its Application inBlast FurnaceY. Li, X.Y. Zhu, Y.W. Zhai, J.P. Wang, W.D. Xue, J.H. Chen and J.L. Sun 1547
Electrical Conductivity and Electromagnetic Interference Shielding Effectiveness ofMultiwalled Carbon Nanotubes Filled ABS CompositesH.Y. Shen, Q.Z. Jiao, Y. Zhao, H.S. Li and Z. Sun 1554
Application of Carbon Fiber Composite on Space Camera FrameQ.F. Guo, W. Li, J.H. Dong, Y.C. Li, K.J. Wang, H.P. Wang and W.G. Zhao 1558
High Performance Si-Si3N4-Sic Sagger Composite Materials Preparation and its AttackMechanism after UsageY.W. Zhai, Y. Li, L. Liu, X.Y. Zhu, J.P. Wang and J.L. Sun 1564
Sliding Wear Behaviour of Cu-10Fe-3Ag In Situ CompositeY. Li, D.Q. Yi, R.Q. Liu and S.P. Sun 1572
Thermal Conductivity Polypropylene/Aluminium Nitride CompositesA.J. Ma, J.W. Gu and W.X. Chen 1577
Progressive Damage Model of FRP Composite Laminates with Central HoleC.Q. Sun, J.Y. Zhang and B.J. Fei 1581
Winding of High Performance Thermoplastic PPESK Composites Using on-Line SolutionImpregnation and In Situ ConsolidationW. Li, W.J. Gao and P. Chen 1586
Structure and Properties Study of Porous Silicon Carbide Composite Based on SLAJ. Jin, M. Ni and S.H. Wang 1590
Microstructure and Properties of La-Doped Ag-SnO2/Cu Contact MaterialC. Fu, J.B. Wang, M.G. Yang, X.H. He, X.L. Su and J. Xu 1594
Microstructure and Compressive Behaviour of 3D Needled C/SiC CompositesS.W. Fan, L.T. Zhang, L.F. Cheng and F. Xu 1599
Study on Electron Beam Curing of APTES Functionalized MWNTs/ Epoxy CompositesY.Y. Lu, H. Li and H.Z. Liu 1607
n Advanced Engineering Materials
Effects of Stitching Reinforcement on Mechanics Behaviour of Composite Π Joint underTensile LoadingJ.Y. Zhang, Y. Fu and L.B. Zhao 1611
Preliminary Research on Interfacial Evolution Behaviour of Ti-Cu Laminated CompositeMaterialsH.M. Yang, P.X. Zhu, S.G. Zhou, J. Xu, H.Y. Ma and J.X. Guo 1615
Effect of Carbon Fiber Felt Pretreatment on Properties of Carbon Fiber PaperX.J. Zhang, H. Pei and Z.M. Shen 1620
Random Response and Statistic Characteristics Analysis of Random Parameters NonlinearSystemsF.X. You and F.H. Lu 1624
Research on New Technology to Control Highway Semi-Rigid Base Asphalt PavementCracksH.L. Deng, X.Y. Fu, W.X. Gao, T.T. Ni and K.J. Chen 1632
Effects of Cold Deformation on Microstructure and Mechanical Properties of Cu-0.35Al2O3(Y) CompositeB.H. Tian, Y.Q. Dai, Y. Zhang and Y. Liu 1639
Surface Analyses of High-Temperature Oxidized In Situ Synthesized Ti-40Al-2.0CCompositesH.G. Wang, F. Wang, Y.P. Song and Z.J. Wei 1643
The Study of Existential State of Protein in Protein/Montmorillonite ComplexesY.H. Lv, G.J. Li, L.Q. Cui, H.X. Yan and S.X. Zhou 1647
Preparation and Characterisation of Sulfonic Acid-Functionalized Carbon/Loess CompositeD.Y. Zhang, Y. Ma, Y. Wang, H.X. Feng, J. Chen, J.C. Zhu and Y. Hao 1652
Study on the Orientation Angle of the Yarns in 3D Integrated Cellular Woven StructureW. Tian, Y.Q. Li, F. Ye and C.Y. Zhu 1656
Antibacterial Property of Chinese fir/TiO2 CompositeS.Y. Huang and K.F. Li 1663
Characterisation of Ti-Al and Ti-Cu Laminated Composite Electrode MaterialsJ. Xu, P.X. Zhu, H.Y. Ma and S.G. Zhou 1667
The Different Probabilistic Method for the Conservatism Analysis of Composite StructureDamage Tolerance DesignT.C. Zou, Z.Y. Feng, H.L. Mou and K.Y. Mao 1672
One-Step Synthesis of ZnS Nanocrystals with Graphite Sheaths from a Single-SourcePrecursorK.J. Zhang, H.Y. Zhou, X.H. Liu and X. Wang 1676
Thermal Properties of the Aluminum Particle Reinforced Silicone Rubber CompositesW.Y. Zhou, J.T. Cai and A.N. Zhou 1680
The Addition of Acid Treated Carbon Nanotube on the Tribological Properties of CarbonFiber Reinforced UHMWPE CompositeJ. Li 1685
Investigation of Microstructure and Property of the Fe3Al/Al2O3 Composites Fabricated byMechanical Alloying Process and Plasma Active Sintering ProcessT. Jiang 1689
On the Improvement of Fiber Reinforced Concrete through Surface Modification ofPolypropylene by Grafting MethodL.H. Chou, L.K. Lin and M.T. Lee 1693
Interlaminar Fracture Toughness of Composite Laminate with Splicing PliesL. Liang, P.R. Jia and G.Q. Jiao 1697
Synthesis of B4C/Al-B4C/TiB2 Composite with a Two-Layer StructureX.Y. Yue, H.Q. Ru, C.P. Zhang and W. Wang 1703
Preparation and Properties of Tapioca Starch-Banana Fiber Composites Modified withMagnesium HydroxideX.Z. Mo, X. Qi, Y.X. Zhong, R.H. Li and C. Mo 1707
Seismic Reliability Analysis of MDOF Systems Based on Odd Exponent WaveletM.L. Xiao, L.Y. Ye and C.T. Gao 1711
Fabrication Porous Si3N4 -Glass Composite by Combustion SynthesisW.K. Li, S.S. Luo and H.R. Zhuang 1716
Advanced Materials Research Vols. 194-196 o
Microstructure and Mechanical Property of an ECAP Processed Al-Mg2Si In SituComposite by Using a Combined RouteL.P. Bian, W. Liang and W.L. Zhang 1720
Improvement in the Thermal Shock Resistance of Zirconia Ceramic by the Addition ofAluminium TitanateH.Y. Wei, L.X. Yu, Z.F. Wang, J.L. Bu, S.L. Ma and Y. Wang 1724
Mechanical and Tribological Properties of PTFE Composites Filled with POBS. Zhang, S.B. Wang and Y. Mao 1728
Effect of Sintering Temperature on Al2O3/TiAl Composite from Ti-Al-TiO2-Eu2O3 SystemF. Wang, X.F. Wang, J.F. Zhu and L.Y. Xiang 1732
Microstructure and Mechanical Properties of Al2O3/Tial In Situ Composites Doped withCr2O3F. Wang, L.Y. Xiang, J.F. Zhu, D. Li and X.F. Wang 1736
Tensile Property of the Flax/Polyester Composites after Water TreatmentQ.H. Wang and G. Huang 1740
Effect of Molar Ratio of Al2O3 to Fe2O3 on the Sintering and Thermal Shock Resistance ofAl2O3-Fe2O3 CompositeZ.F. Wang, J.S. Wang, Y.J. Chen, L.X. Yu, J.L. Bu and R.L. Wang 1745
Preparation and Characterisation of Polyborazine as Novel Precursor to Boron NitrideCeramicC. Deng, Y.C. Song, M.F. Zhu, H.B. Su, X.D. You and P. Chen 1749
Effect of Sintering Temperatures on the Sintering Performance and Thermal ShockResistance of MgO-Al2O3-Fe2O3 CompositeJ.L. Bu, Y.Q. Cai, L.X. Yu, Z.F. Wang and R.L. Wang 1755
Properties Research of Cotton Fiber Reinforced Gypsum Based CompositesW.H. Zhang, G.Z. Li and M.R. Liu 1759
Research on Oxidation Reaction of AlN PowderR.L. Wang, J.L. Bu, L.X. Yu, Z.F. Wang and J.L. Sun 1763
Microstructure and Mechanical Properties of High-Strength Graphite Particles CoatedTiO2 Film Embedded in SiC CompositeL. Yu, Y.L. Jiang, D. Kan and H.Q. Ru 1768
Mechanical and Tribological Properties of Phenol Formaldehyde Resin Reinforced withNano-SilicaC.B. Yu and C. Wei 1772
Finite Element Analysis and Experimental Investigation of Carbon Fiber CompositeCircular TubeL. Fu, G.Q. Tao, Y.N. Huang and Z. Wu 1776
Research on the Flexural Behaviour of Reinforced Concrete Beams Strengthened withCFRPH. Wei, J.Y. Zhang, D.W. Zhu, Z.Y. Peng and H.J. Wang 1781
Microstructure of In Situ Tic-Mo-Ni And Tic-WC-Mo-Ni Cermets Synthesized by ReactiveHot-Pressing SinteringZ.D. Liu, L.P. Zhao, Y.R. Bao and B. Li 1785
Microstructure Characterisation and Mechanical Behaviour of 2D C/SiC-C Composite withSiC/PyC Multilayer MatrixZ.X. Meng, L.F. Cheng, Q.M. Liu, X.F. Han and L.T. Zhang 1789
Dynamic Effective Properties of Particle-Reinforced Composites with Imperfect InterfaceX.Q. Liu, P.J. Wei, L. Wang and G. Zhang 1793
Microstructure and Mechanical Properties of In Situ WC Particles Reinforced Iron-BasedComposite CoatingY.H. Fu and L.B. Niu 1803
Preparation and Characterisation of TiO2-Supported on the Surface of SiO2S. Bu, Z.W. Gao, J.L. Li and W. Tikkanen 1807
Wood-Polymer Composite Prepared by Combined Two-Step Method and its DimensionalStabilityY.F. Li, J.L. Gao, F. Li, D.W. Gong and Y.X. Liu 1811
Chemical Modification of Poplar Wood on the Mechanical PropertiesG.F. Wu, Q. Lang, B. Wang, Y.F. Jiang and J.W. Pu 1815
p Advanced Engineering Materials
Influence of Hydrothermal Environment on the Composite Laminate Plate with a HoleL. Li, P.Y. Wang, Y. Wang, X. Guan and Z.F. Yue 1819
Three-Dimensional Effective Elastic Moduli for Multidirectional Filament-Wound Tubewith LiningG.L. Xu, W.J. Ruan, H. Wang, Q.P. Yang and J.W. Liu 1823
Effects of Fe on Friction and Wear Properties of Cu-Based Friction AterialR. Fu, F. Gao and B.Y. Song 1830
Study on Porous Structure and Surface Characteristics of Al-Pillared MontmorilloniteG.F. Wang, S.J. Ma, S. Zhang, X.J. Lu, W. Mo and J.L. Yang 1834
A Study of Ramie Fiber Reinforced Polypropylene CompositesY.M. Sun, D. Peng and M. Li 1839
Preparation and Performance Study of Carbon Fiber Reinforced ABS Modified NylonResin Base Composite MaterialH.K. Zhao 1845
Characteristic of Raman Spectra, Crystal Structure and Superconductivity of Fe-DopedGdBa2Cu3-xFexO7-δ SystemsT. Li, R.Z. Xue, C.M. Wang, L. Su, H.Y. Dai and Z.P. Chen 1849
Design of the Stitching Parameters Applied to the Laminates with Cut-OutY. Wang, Z.F. Yue and L. Li 1854
Experimental Study on the Axial Behaviour of Cold-Formed Thin-Walled Steel FramingWall StudsY. Shi, X.H. Zhou, X.L. Yuan and S.F. Nie 1858
Experimental Study on Applying Bentonite for Mango StorageW. Mo, J.P. Feng, S.J. Ma, Y. Gao, K. Liu and X.J. Su 1864
Study on Preparation Technique of SiC/Cu-Al Composite by Pressureless InfiltrationS.M. Du, C. Hu, M.J. Wang and W.T. Zhao 1869
A Study of Test for Polyethylene / Modified Montmorillonite NanocompositesM.K. Chang, J.Y. Lin, Y.H. Peng, J.J. You and Y.M. Wang 1876
In-Plane Anisotropic Mechanical Properties of Three-Dimensional Angle-InterlockArchitectural CompositesC.Y. Yang and Y. Liu 1880
6 Earthquake Resistant Structures, Materials and Design
Parametric Study of Hysteretic Behaviour of Combined Welded Heavy Steel Plates withAccumulative DamageN. Yang, J.J. Zhang and T. Guo 1887
TRIZ and its Application in Industrial DesignJ.Y. Zhang and J.Q. Cao 1892
Shear Strength Upgrade of Perforated RC Shearwalls Using Prestress and Steel PlateC.S. Choi, B.I. Bae, H.K. Choi and I.S. Park 1896
Nonlinear Finite Element Analysis of Shearwalls with Various Types of OpeningsB.I. Bae, H.K. Choi and C.S. Choi 1900
Seismic Performance of CFRP Strengthened Unreinforced Masonry StructuresS.L. Yuan 1904
The Effect on Scattering of SH-Wave in a Layered Half-Space with the Subsurface CircularCavitiesD.N. Chen, H. Qi and Y. Shi 1908
The Dependence of the Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to H2SO4 Solution onthe 4Cr/ (2Mo+Cu)L.H. Pan and R.C. Yang 1912
Study on Properties of Foam Concrete Based on Fractal TheoryW.L. Tian, J.B. Yang and X.Y. Zhao 1916
The Dependence of the Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to HCL Solution on the4Cr/ (2Mo+Cu)P. Li Hua and R.C. Yang 1920
Advanced Materials Research Vols. 194-196 q
Dynamic Analysis of Steel Tube and Concrete-Filled Steel Tube High-Limit ProtectionRacks under Impact LoadsA.T. Ju, S.Y. Qu, X.M. Hou and J.T. Wang 1924
Research on a New Type of Rolling Ball IsolatorJ.Y. Sui, Y.W. Gong and W.F. Liu 1929
Experimental Study of the Steel Type Buckling Restrained BracesX.D. Li and X.L. Wang 1933
Analysis and Countermeasures on Seismic Damages of Gas Pipeline Network in WenchuanEarthquakeX.J. Wang, E.D. Guo and M.J. Zhang 1938
Seismic Isolation Effect of a Tunnel Covered with Expanded Polystrene GeofoamD.L. Wang 1943
Seismic Damage Analysis on Water Supply System in Wenchuan EarthquakeD. Yang, E.D. Guo and Q. Wang 1947
A Comparative Study on Seismic Reinforcement Test of Beijing Rural Brick BuildingW. Yang, M.S. Wang, E.Y. Zhu and Y. Cheng 1951
Experimental Research on Seismic Behaviour of Low-Carbon Construction Materials RACFrame ColumnsC. Liu, G.L. Bai and H.J. Zhao 1958
Analysis for Seismic Response of Long Span Rigid Frame BridgeX.J. Ning and Y.T. Zhou 1962
Collision Analysis of Protection Frame for Height Limit and Over-High TrucksJ.T. Wang, S.Y. Qu, X.M. Hou and A.T. Ju 1967
Comprehensive Evaluation of Construction System on Steel Structure HousingX.H. Xu 1973
Research on the Application of Periodic Truss-Core Structures to Structural Design ofMachine ToolD.Q. Gao, Z.Y. Mao, Z.Y. Li and F. Zhang 1977
Finite Element Analysis of Air Cooler Used in Nuclear Power StationS.Q. Hu and Y.L. Zhang 1982
Seismic Behaviour on Composite Strengthening for Existing Reinforced Concrete ShortColumnsG.T. Zhao 1986
Modal Comparison and Bridge-Type Optimization of Light-Rail Box Girder BridgesJ.J. Zhao, D.M. Wei and Z.H. Huang 1990
Research on Semi-Active Control of Large-Scale AqueductL. Huang, B. Wang and J.G. Xu 1997
Comparative Study on the Pseudo-Dynamic Testing of Semi-Rigid Connection of SteelFrames with or without BraceJ. Lv and Q.L. Zhang 2001
A New Seismic-Isolation Device Applied in Continuous Beam BridgeB. Yan 2008
The Seismic Behaviour of the Materials Used in the Steel-Plate Shear Walls with ConcreteFilled Steel Tube ColumnsY.H. Wang, W.L. Cao and G. Li 2014
Dynamic Responses of RC Underground Subway Station and Soil during the StrongEarthquakeJ. Bian, L.J. Tao, W.P. Wang and B. Zhang 2018
7. Tooling Testing and Evaluation of Materials
The Evaluation of Organic Coating with Artificial Defect Degradation with EISMeasurement: Phase Angle at High FrequenciesJ. Liu, X.B. Li, J. Wang and S.B. Li 2027
The Micro-Mechanism Analysis on Rock Creep DamageQ. Sun, H.F. Duan, L. Xue and L. Qin 2031
Dynamic Fracture Toughness Test and Evaluation for S135 Drill PipeY.X. Sun, Y.H. Lin, L. He, T.h. Shi, D.J. Zhu, L.P. Chen and S.J. Liu 2035
r Advanced Engineering Materials
Effect of Salt in Aqueous Solution on the Swelling and Water-Retention Capacity ofBentoniteZ.M. Sun, J. Yu, S.L. Zheng and C.H. Bai 2039
Surface Characterisation of the Corundum-Route Lead Magnesium Niobate FerroelectricCeramicsL. Srisombat, R. Wongmaneerung, R. Yimnirun and S. Ananta 2046
The Photocatalytic Characteristics of TiO2 Films: an Expeditious EvaluationK.S. Kao, W.C. Shih, D.L. Cheng, P.H. Kuo, P.S. Hung, C.Y. Chan, C.M. Wang and P.T. Hsieh 2050
Applying Ultrasonic Testing to Detect Hole Defect Near the SurfaceM.K. Chang, H.S. Sun and J.C. Ciou 2054
8. Waste Engineering and Management
Treatment and Disposal of Municipal Sewage Sludge and it’s Resources Utilization asConstruction MaterialD.L. Jiang and G.W. Ni 2061
The Physical and Chemical Properties of Fly Ash fom Municipal Solid Wastes IncinerationM.T. Jin, C.J. Huang and Z.F. Jin 2065
A Review on the Treatments and Minimization Techniques of Stainless Steel PicklingSludgeX.M. Li, S.J. Wang, J.X. Zhao, Y.R. Cui and S.B. Hou 2072
A Study on the Continuous Manufacturing Technique of A-GypsumL.C. Han, Y.C. Wang and X.F. Shi 2077
Experimental Study of Glass Ceramics from Liquid Hematite SlagY.M. Nie, F.S. Niu and J.X. Zhang 2082
Study of Fluorgypsum ModificationY.Y. Wang, G.Z. Li and F.F. Wang 2086
Using Thermal Analysis Studying Reaction Process of Forsterite with Iron Ore TailingsJ.H. Liu, Q. Wang and J. Li 2090
Study on Clean Treatment of Urea-Formaldehyde Waste Using Fast PyrolysisJ.S. Gou, J.M. Chang, X.Y. Ren, Y. Han, H. Si and Y. Huang 2097
The Microstructure and Properties of Restored WCP/Fe-C CompositesY.P. Song and H.G. Wang 2105
Recycling and Characterisation of Amorphous Silica from Zr-Containing Silica ResidueX.J. Zhang, H. Ding and B.K. Wang 2109
Gallium and Arsenic Recovery from Waste Gallium Arsenide by Wet Refined MethodsW.T. Chen, Y.C. Chu, J.M. Wei, L.C. Tsai, F.C. Tsai, C.P. Lin and C.M. Shu 2115
Hydration Characteristics and Cementious Properties of Pyrolytic Steel SlagD. Ou Yang, C.B. Yi, W.T. Xu and L.L. Lu 2119
Research on Kitchen Waste Disposal Equipment and TechnologyF.Q. He, H.L. Wang, P. Qian and S.M. Xu 2127
Effect of Brown Corundum Dust Powder on the Sintering Performance of Corundum-Silicon Nitride CastableW.D. Xue, Y. Li, J. Tong, X.X. Huang and J.L. Sun 2131
The Preparation of High-Strength and Micropore Lightweight Bauxite Aggregate by In SituPolymerization and DecompositionY.N. Fang, H.Z. Gu, Y.S. Fen, L.J. Wang and Y.J. Li 2135
Mineral Sequestration of CO2 Using Basic Oxygen Furnace (BOF) Steelmaking SlagG.J. Ma, H. Tang and Y.B. Jin 2140
Thermodynamic Analysis on Separation Process of Iron and Niobium for Iron TailingsContaining NiobiumB. Zhang, J. Qi, C.J. Liu and M.F. Jiang 2145
Effect of Microwave-Treatment Power on the Properties of Activated Carbons as ElectrodeMaterials for SupercapacitorsX.J. He, R.C. Li, M.D. Zheng, T. Wang and X.Y. Zhang 2151
Shrimp Waste Fermentation Using Symbiotic Lactic Acid BacteriaS. Duan, Y.X. Zhang, T.T. Lu, D.X. Cao and J.D. Chen 2156
Advanced Materials Research Vols. 194-196 s
Preparation and Characterisation of Amorphous Silica from Alkali Wastewater Producedin Manufacturing Process of ZrOCl2B.K. Wang, H. Ding, Y.X. Zheng and N. Liang 2164
Study on Desulfurization and Denitration of with Industry Solid Waste by MicrowaveZ.J. He, Y.L. Jin and J.X. Liu 2169
Thermodynamics of Slag Formation in Multi-Component Oxide Systems in ThermalProcessing of Incineration Bottom Ash - Equilibrium Phase Relation in CaO-SiO2-FeOx-MgO SystemN. Wang, Z.S. Zou, Z. Zhang, Y.P. Xiao and Y.X. Yang 2175
In Situ Synthesis of β-Sialon Powder from Fly AshB.Y. Ma, Y. Li, L.B. Xu and Y.C. Zhai 2179
A New Interior Plywood Adhesive Based on Oil -Tea CakeD.B. Fan, T.F. Qin and F.X. Chu 2183
Study on the Hydrolysis of Corn Stalk and Photosynthetic Bacteria Group FermentationHydrogen ProductionB.C. Cui, G.X. Zhang, B. Hou, J.Y. Zhao and R. Li 2187
9. Other Related Topics
Numerical Simulation of High Inner-Pressure Hydroforming of T-Branch TubeL. Chu, J. Zhang and D.S. Bi 2193
The Die Design of Large Diameter Tee Multi-Pass Extrusion ProcessJ. Zhang, T. Li, L. Chu and D.S. Bi 2199
Velocity Optimization on Squashing and Bending Process of Large Diameter ElbowJ. Zhang, T.M. Xiao, L. Chu and D.S. Bi 2204
High Anticorrosion Nano Zn-Fe Coatings by Pulse ElectrodepositingH.L. Hu, Y.M. Zhu, Z.M. Tu and W.J. Liu 2209
Reverse Engineering Application in Automobile Parts DesignX.L. Yang, T.R. Zhou and L.M. Wang 2216
Molecular Dynamics Simulations of Structures of Amorphous Carbon Films via DepositionH.Q. Lan and Z.L. Kang 2220
α/β Phase Transformation in Porous Reaction-Bonded Silicon Nitride CeramicsJ. Xu, J.B. Wang, W.H. Cui, X.L. Su and W.C. Zhou 2225
Analysis of Characteristic of Microstrip Signal Loss in Course of Signal TransmissionQ.S. Xiong, Z.H. Wu, P. Chen and S. Zhang 2229
Structures and Properties of ZnO-Based Ceramic Films for Low-Voltage Varistors by theR.F. Magnetron SputteringY.Q. Hua, Z.Z. Sun, R.F. Chen and R.L. Xu 2233
Synthesis of Aluminium Diethylphosphinate by Gas-Liquid Free Radical Addition Reactionunder Atmospheric PressureL. Yang, X.Y. Han, L.L. Li, C.L. Bi, X.J. Tang and B.G. Zhang 2237
Comparative Study of GaN—Based LED Grown on Different SubstratesD.S. Peng, K. Jin, R.S. Zheng, L. Liu and Z.C. Feng 2241
Influence of Dope Concentration on Morphology And Properties of Cellulose Hollow FiberMembranes Prepared from Cellulose/[Amim]Cl Dope SolutionY. Liang, B.W. Cheng, J. Song, X.J. Ji, F. Lu and Z.G. Guo 2245
Study of Mg(Zr0.05Ti0.95)O3 Dielectric Thin Films by Sol-Gel MethodC.F. Tseng, P.C. Yang, C.H. Lai and C.W. Lee 2249
Fabrication of Ti-Doped ZnO Thin Films by Chemical Bath DepositionC.H. Hsu, W.S. Chen, C.H. Lai and S.F. Yan 2254
Research on ZnS Buffer Layer by RF Magnetron Sputtering for Cu(In,Ga)Se2 Solar CellsY.Q. Hua, J. Yu, R.F. Chen, C. Chen and R.L. Xu 2259
Preparation and Characterization of Radar Wave Absorbing CB/PP FibersB. Yu, H. Sun and J. Han 2263
Electromagnetic Properties of Polyaniline Co-Doped with CSA and Ni2+
S.B. Zhu, M. Jiang, A. Zhao, W. Wei and Z.W. Zhou 2268
t Advanced Engineering Materials
Electrical and Optical Properties of Indium and Aluminium Doped Zinc Oxide FilmsPrepared by RF Magnetron SputteringL.T. Yan, J. Rath and R. Schropp 2272
Analysis of T-Peel Weld-Bonded Joint with Single Overlap SupportA.M. Al Samhan 2276
Effect of Aging Treatment on Microstructure and Wear Behaviour of a Nickel BasedHardfaced CoatingD. Kesavan and M. Kamaraj 2284
Surface Characteristics of Ni-Mn-Fe-Ga Sputtered Thin FilmsH.B. Wang, J.Y. Xu and W. Cai 2290
Preparation and Characterization of Ce-Implanted TiO2 Thin FilmsS.K. Zheng 2296
Preparation and Characterizaion of Hydrophobic Transparent Hard Sol–Gel Nano-Composite FilmsL.F. Yao, S. Wang, L. Li, R.Q. Xu, Y.P. Chen and J.L. Kang 2300
Dependence of Film Thickness on Properties of Al Doped ZnO Thin FilmsY.G. Yang, D.M. Zeng, H. Zhou, W.R. Feng, S. Lu and W.B. Feng 2305
Effect of Film Thickness on the Structural and Physical Properties of CdZnTe Thin FilmsD.M. Zeng, W.Q. Jie, H. Zhou, Y.G. Yang and F. Chen 2312
Preparation of C60 Thin Film and Investigation of its Optical PropertiesX.L. Yang, J.X. Deng, T. Li, Y. Qin and L. Kong 2317
Preparation and Dielectric Measurement of Pb(Zr0.95Ti0.05)O3 Ferroelectric FilmsD.S. Yu, C. Zhang, Z.K. Wei, Y. Wang and Y.Y. Chi 2322
Research on Reflectivity per Wavelength by Foaming Ratio of Plastics and OpticalCharacteristicsE. Han, S.W. Cha and Y.H. Kim 2326
Effect of Sulfuric Acid /Sodium Hydroxide /Sodium Chloride on Properties of PolyureaP. Lv, X.M. Li and W.B. Huang 2330
Stability of AZO Thin Films under the Environment of Hydrogen PlasmaQ.N. Zhao, W.H. Yuan, H.Y. Liang, W.Y. Wang, P.L. Yang and Y.H. Dong 2334
Effect of RF Sputtering Power on the Structural, Optical and Hydrophobic Properties ofSiNx Thin FilmH.Y. Liang, Q.N. Zhao, F. Gao, W.H. Yuan and Y.H. Dong 2340
Study on the Properties of LDPE/POE/Zeolite Molecular Sieves Composite FilmZ.N. Zhao, X.X. Nie and R. Wang 2347
Nonisothermal Crystallization Kinetics of HDPE/UHMWPE/n-HA CompositesH.L. Shen and N. Zhang 2351
Preparation and Electrochromic Characterization of Nanocrystalline Nio-Base Thin FilmsL.C. Wang 2355
Manufacture of Non-Toxic Lava from Recovery of the Incineration Ash by Plasma FusingTechnologyJ.H. Leu, L.F. Wu and A. Su 2365
Effect of a Thin Cr Layer on the Microstructures and Fracture Behaviours of Copper FilmsH.L. Sun, Z.X. Song, F. Ma and K.W. Xu 2376
Evaluation of The Wool Fiber Surface Modified by Chlorine and Pilling Propensity ofSingle JerseyA.L. Wan and W.D. Yu 2380
Growth of Double-Side Tl-2212 Thin Film on CeO2-Buffered MgO SubstrateQ.L. Xie, Y.T. Zhang, F.C. Fang, G.H. Huang, L. Ji, X.J. Zhao, L. Fang and S.L. Yan 2384
Investigation of Dynamic Stray Capacitance and Circuit Network Model for PlanarInductor with Nanocrystal Magnetic CoreJ.Y. Lou, F. Dang, L. Gao, C.P. Niu and F.J. Jiao 2388
Effects of Heating on the Tensile Property of Soybean Protein FibersQ.B. Yang and X. Yang 2396
Influence of Sputtering Power of Te and Annealing on Sb-Te Thin Films Fabricated by RFand DC Co-SputteringT.B. Chen, P. Fan, Z.H. Zheng, D.P. Zhang, X.M. Cai, G.X. Liang and J.R. Chi 2400
Advanced Materials Research Vols. 194-196 u
Electrodeposited Crack-Free CdS Thin Films Using Organic SolventsH.N. Chen, A.M. Qin, L. Liao, P. Tang and Q. Pang 2404
Surface Modification of Starch and its Application in Rubber Composite with Low HeatGeneration and High Fatigue ResistantQ.H. Fang, T.Y. Li, N. Wang, L.J. Jin and Y. Liang 2409
The Theoretical Prediction and Experimental Verification of Modal Parameters for CarbonFiber Reinforced Composites with Sandwich StructureG.L. Zhang, Y.N. Wang, J.L. Li, G.W. Chen, L. Chen and F.Y. Wang 2415
The Effect of Reinforcement Structure on the Modal Parameters for Sandwich StructureComposite PlateG.L. Zhang, Y.N. Wang, J.L. Li, G.W. Chen, L. Chen and F.Y. Wang 2420
Synthesis of Waterborne Polyurethane for Coating on HNIWS.R. Liao, Y.J. Luo, J. Sun and H.M. Tan 2425
Study on Analysis Methods of Tear Propagation of Fabric LaminatesJ.H. Meng, D.X. Liu, Y. Zhang, Z. Jia and M.Y. Lv 2429
Fabrication and Characterization of Transparent P-Type ZnO Films Obtained by In SituOxidation of Sputtering Zn3N2 :AlJ. Zhang, L.X. Shao, W. Xie and C.W. Zou 2435
Room Temperature Deposition and Properties of AZO Thin Films by DC MagnetronSputtering under Different Plasma PowerJ.R. Chi, P. Fan, G.X. Liang, D.P. Zhang, X.M. Cai, Z.H. Zheng and T.B. Chen 2440
Analysis of Influence of Optical Electrode Geometry Effects on Manipulation UsingLateral-Field Optoelectronic TweezersC.F. Song, K. Chen and Z.H. Ni 2444
The Detection of Different Physical Properties of Laser-Damaged HfO2 Film on SiO2Substrate by Scanning Probe Acoustic MicroscopeW.G. Yao and Q. Cheng 2448
Synthesis and Characterization of one Component Heat Cured Polyurethane-AcrylateSealantsF. Zhu, G.Y. Wang and Q. Xu 2452
Fabrication of CaWO4:Eu3+ Thin Films via Electrochemical Methods Assisted by a NovelPost TreatmentL.P. Chen, Y.H. Gao, J.X. Yuan, Q.H. Zhang, Y.H. Yin and C.X. Wang 2458
Theoretical Analysis of Thin Film Oxide as Insulator of Planar Micro-CoilsJ. Yunas, A.A. Hamzah and B.Y. Majlis 2462
Influence of Film Thickness on Dielectric Properties of (Pb0.97La0.02)(Zr0.95Ti0.05)O3Antiferroelectric Thin FilmsJ. Liu, J. Wang, Y.T. Zhang, W.P. Geng and X.J. Chou 2467
Preparation of Activated Carbons from Lignite for Electrochemical Capacitors byMicrowave and Electrical Furnace HeatingB.L. Xing, C.X. Zhang, L.J. Chen and G.X. Huang 2472
Research on the Oil-Gas Permeability of Mixed Hollow Fiber Membrane Made by PTFEand PHFPW.G. Chen and M. Hao 2480
Electrochemical Properties of NiO thin Film Prepared by Sol-Gel ProcessJ.N. Zhu, S.L. Zhao, J.B. Wen and Z.Y. Wu 2487
Effect Analysis of Ar-N2 Flow Rates on ZrNX Film by Pulsed Magnetron Sputtering UsingDesign of Experimental MethodH.J. Wen, F.L. Wen, K.H. Chang, C.H. Wen and Y.L. Lo 2491
The Properties of Organosolv Pulp and Cellulose from Eucalyptus with MK2H. Zhang, J. Zhang and J.W. Pu 2499
Esterification over Nano Solid Superacid So42-/ZrO2–Sm2O3-SiO2
F. Li and C.M. Ding 2503