table of contents · 800-444-7161 fax: 318-797-4864 box 5705 l shreveport, louisiana. 71135 phone:...
TRANSCRIPT
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
2.3 and 4-Inch Digit Displays ..........................
8 and 12-Inch Digit Displays ...........................
AE Series Clock/Timer .....................................
Multi-Function Clock/Timer Displays ................
Run Time Accumulator ....................................
Run Time Accumulator Displays .....................
Tenths and Hundredths Timers .......................
Timer Controls ..................................................
Precision Timer STD-11-2 and STD-525T ......
Specials / OEM Products ................................
Serial Data Interface ........................................
Desktop Control Terminal-AE21 ........................
RS232 Serial Input Displays ............................
Analog Input .....................................................
Analog Input Displays ......................................
Counters, Up/Down Counters ...........................
Counter Displays ...............................................
Production Monitoring Systems .......................
Production Monitors, Tote Board Displays .....
NEMA 4X Digital Clocks, Bezel Mounts .........
Special Enclosures ...........................................
Time Switches, AP21-BP1 Bell Programmer ..
MC41-BP1 Bell Programmers, Bell Kits ..........
1
Tab
le o
f C
on
ten
ts
Viewing DistancesDigit Size: Typical Maximum
1.8" 50 FT 85 FT 2.3" 70 FT 110 FT 4" 120 FT 200 FT 8" 240 FT 350 FT 12" 360 FT 500 FT
To determine what size digitsyou need for your AE andCC2000 Series Displays,
refer to this chart.
Master Clocks ...................................................
Master Clock Options and Accessories ..........
System Clocks - CC2000 and CC186 ..............
Eight and Twelve Inch System Clocks ..........
Display Guards ...............................................
Transformer Assemblies, Bells and Horns .....
Computer Based Clock Systems ....................
GPS Based Clock Systems ...........................
GPS-TR3 Master Clock Interface ....................
Time Zone Master Clock Systems .................
World Time Zone Clocks .................................
Synchronized World Time Zone Clocks .........
Council Chamber Timer ..................................
Project Completion/Julian Clock .....................
Pace Counters ..................................................
Numerical Call System ....................................
Alpha-Numeric Displays ...................................
Alpha-Numeric Displays ...................................
AE Series Options and Accessories ................
Free ATS Software ..........................................
Power and Mounting Options .........................
About Applied Technical Systems ..................
Notes .................................................................
TABLE OF CONTENTS
All products can be configured for your needs.
If you can't find it - Call us.
Custom Configurations Available.See inside back cover.
2
3
4
5
6
7
8
9
10
11
12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
37
38
38
39
40
41
42
43
44
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
VISIBLE UP TO 100 FEET
HOSPITALS
SCHOOLS
RADIO / TV STUDIOS
THEME PARKS / MUSEUMS
FACTORIES
PRODUCTION LINES
MASTER CLOCK SYSTEMS
RACK MOUNTED SYSTEMS
IDEAL FOR:
AE26 DIGITAL CLOCK
AE24 PROCESSINDICATOR
AVAILABLE WITH:
BRIGHT RED Bar Segment LED's4, 5, 6 or More Digits
llll
AE26R RACK MOUNT DIGITAL CLOCK
120 VAC, 60 Hz Operation (Other power is optional)
Anodized Aluminum EnclosuresMounting Brackets
Optional Rack Mount and NEMA EnclosuresRS232 Interface
Scaled Analog Inputs (4 - 20 MA, 0 - 5 VDC, or 0-10 VDC)
Wireless RF ControlATS DEMO SOFTWARE
Custom Versions
AE2412 FLUSH MOUNTDIGITAL CLOCK
Clocks, Timers, Counters, Process Indicators, 4-20mA, BCD, RS232,Connects to Master Clocks, PLC'S, Computers and Control Switches.
VISIBLE UP TO 200 FEET
Super Bright RED Dot LED's, orSuper Bright RED Bar Segment LED's2, 3, 4, 5, 6 or More Digits
llllll
AE43D PROCESS INDICATOR
AE46S PROCESS INDICATOR AE44S DIGITAL CLOCK
4 - Inch High Digits
2.3 - Inch High Digits
AE SERIES 2.3 and 4-INCH DIGIT DISPLAYS
2
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
VISIBLE UP TO 350 FEET
IDEAL FOR: AVAILABLE WITH:
SUPER BRIGHT RED Dot LED's2, 3, 4, 5, 6 or More Digits
llll
Clocks, Timers, Counters, Process Indicators, 4-20mA, BCD, RS232,Connects to Master Clocks, PLC'S, Computers and Control Switches.
VISIBLE UP TO 500 FEET
Super Bright RED Dot LED's2, 3, 4, 5, 6 or More Digits
llll
12 - Inch High Digits
8 - Inch High Digits
AE SERIES 8 and 12-INCH DIGIT DISPLAYS
AE84 DIGITAL CLOCK
FACTORIES
PRODUCTION LINES
HOSPITALS
SCHOOLS
SPORTING EVENTS
SWIM CENTERS
THEME PARKS / MUSEUMS
MASTER CLOCK SYSTEMS
AE86 PROCESS INDICATOR
AE82 PROCESS INDICATOR
3
AE122 PROCESS INDICATOR
AE124 DIGITAL CLOCK
Lar
ge
Dig
it D
isp
lays
120 VAC, 60 Hz Operation (Other power is optional)
Anodized Aluminum EnclosuresMounting Brackets
Optional Rack Mount and NEMA EnclosuresRS232 Interface
Scaled Analog Inputs (4 - 20 MA, 0 - 5 VDC, or 0-10 VDC)
Wireless RF ControlATS DEMO SOFTWARE
Custom Versions
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE SERIES CLOCK / TIMERS
2.3" - VISIBLE at 70 FEET
USE STAND-ALONE orAS A MASTER / REMOTE SYSTEM
DESCRIPTIONFEATURES
12 or 24 HOUR TIME OF DAY
COUNT UP ELAPSED TIME
COUNT DOWN ELAPSEDTIME
CODE BLUE OVERRIDE
BUILT-IN CONTROLS
PROGRAMMABLE PRESETVALUES
BUILT-IN CORRECTION
59TH MINUTE, MIDNIGHT /NOON CORRECTION.
FOR SCHOOLS, HOSPITALS, FACTORIES, SPORTS FACILITIES,THEATERS, BOARDROOMS and MUSEUMS.
FOUR AND SIX DIGIT MULTI-FUNCTION CLOCK / TIMERS
8" - VISIBLE at 350 FEET
AVAILABLE with 2.3", 4", 8" and 12" DIGITS and a VARIETY OF ENCLOSURES...
AE Series Multi-Function Clock / Timers function as 12or 24 hour stand-alone or secondary clocks, and simul-taneously as presettable up or down counting elapsedtimers. All clock and timer functions are programmedand controlled from built-in control switches. Optionalremote switch panels are available for control up to100 feet away.
The Master/Driver option can be installed which allowsthe Clock / Timer to serve as a master for AE Seriesremote displays. Other options are available.
Complete systems are available to cover any size facil-ity. Options are available to reference your time of dayto your computer, to NIST or to the GPS system.Other sizes and configurations are available.Contact the factory for more details.
4
USE BUILT- IN CONTROLSOR A REMOTE SWITCH PANEL
AL
SO
, S
EE
SY
ST
EM
CL
OC
KS
ON
PA
GE
26
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE44S Four Digit 16"W x 6.1"H x 3.5"D Built-in Controls
AE46S Six Digit 24"W x 6.1"H x 3.5"D Built-in Controls
5
AE2412R Six Digit 19"W x 5.2"H x 3"D Sec. are 1" high - Built-in Controls
AE26R Six Digit 19"W x 3.5"H x 6"D Built-in Controls
AE84 Four Digit 30"W x 10"H x 3.5"D Built-in Controls
AE86 Six Digit 44"W x 10"H x 3.5"D Built-in Controls
AE124 Four Digit 48"W x 15"H x 3.5"D Built-in Controls
AE126 Six Digit 72"W x 15"H x 3.5"D Built-in Controls
12-Inch Multi-Function Clock/Timers
8-Inch Multi-Function Clock/Timers
4-Inch Multi-Function Clock/Timers
AE2412 Six Digit 12"W x 6.1"H x 3.5"D Sec. are 1" high - Built-in Controls
AE2412H Six Digit 12"W x6.25"H x3.25"D Sloping Front Wall Mount Enclosure Sec. are 1" high - NO Built-in Controls May Require a 2101 or 2102 Switch Panel
AE24 Four Digit 12"W x 6.1"H x 3.5"D Built-in Controls
AE26 Six Digit 12"W x 6.1"H x 3.5"D Built-in Controls
Rack Mount
Super Bright Red, Dot LED'sWall Mount
AE44D Four Digit 16"W x 6.1"H x 3.5"D Built-in Controls
4-Inch Multi-Function Clock/TimersBright Red, Diffused Bar LED'sWall Mount
AE46D Six Digit 24"W x 6.1"H x 3.5"D Built-in Controls
MULTI-FUNCTION CLOCK / TIMERS2.3-Inch Multi-Function Clock/TimersBright Red, Diffused Bar Sement LED's
Wall Mount
AE-OPT-PC8 8 foot power cordAE-OPT-273 RF Wireless Control (2 channel). Provides
wireless control of the Start/Stop and Resetfunctions of the elapsed timer.Requires one AERFTX2 Handheld RF RemoteControl.
AERFTX2 Handheld RF Remote Control (2 channel).AE-OPT-348 Master/Driver Output. Sends display data to
other AE Series Large Displays with Option349 installed.
AE-OPT-376 Relay Output, SPDT (15 Amps, 120 VAC or24 VDC) Typical wiring is provided by pigtaillead wires. Specify wiring configurationwith your order.
AE-OPT-412 Automatic Reset/Restart or Single InputReset/Restart
0900-7015 Power Module, 120VAC/12VAC, 500ma0900-7025 Power Module, 120VAC/12VAC, 1A8901-1821 Transformer Assembly 24 VAC, 8 AMPS
Powers up to 25 CC2002’s or 24 VAC Bells.
Delete built-in controls, add 30 foot 10 conductorcable for 2101/2102 Remote Switch Panel.Remote Switch Panel with key-lock SET switchRemote Switch Panel with toggle SET switchControl, Red Push Button Switch, PlasticEnclosure. Flange Mount. Specify label:Reset, Run, Count, Hold, Increment, etc.Control, Keylock Switch, Plastic EnclosureFlange Mount. Specify label:Reset, Run, Count, Hold, Increment, etc.Control Station (2101 Keylock) Plastic Enclosure – Flange MountControl Station (2102 Toggle) Plastic Enclosure –Flange MountPendant Control, provides two momentary pushbutton switches. Handheld pushbutton controlfor Start / Stop and Reset control of AE and CCSeries Elapsed Timer Displays. Controls Countand Reset functions on AE Series EventCounters and Production Monitors. Enclosure:Black, ABS plastic. 5.5”L x 2.5”W x 1.2”D.
Multi-Function Clock / Timer Options and Accessories
For pictures of select options and controls see page 40.
AE2412F Six Digit 13.4"W x 8.4"H x3.6"D Sec. are 1" high - NO Built-in Controls May Require a 2101 or 2102 Switch Panel
AE24F Four Digit 13.4"W x 8.4"H x3.6"D NO Built-in Controls May Require a 2101 or 2102 Switch Panel
Flush Mount
CL
OC
K /
TIM
ER
S
MFCT2
210121022121B-P
2122B-P
2101B-P
2102B-P
2171-1
N E E DA S S I S T A N C E ?
CALL US.Super Bright Red, Dot LED'sWall Mount
Super Bright Red, Dot LED'sWall Mount
Standard Configuration: 120 VAC 60 Hz pigtails exit rear enclosure unless marked otherwise. See page 42 for optional power and mounting configurations.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-75086
RUN TIME ACCUMULATOR
RUN / HOLD
RESET
LIMIT SWITCH
OR
Two inputs are required: Run/Hold and Reset.Easily connects to a variety of input devices including:
control switches, photo-electrics, limit switches, and 24 Volt - PLC outputs.
Isolated inputs allow for long wire hookup, up to 1000 feet away.Adapts to all types of signals such as Dry contacts, TTL signals, and
12 to 120 VDC or 12 to 120 VAC control signals.
Accumulates elapsed time in any combination of hours, minutes andseconds when the Run/Hold signal is applied. Reset sets the display to zero.
Retains accumulated time on power outages,
Provides 12 to 15 VDC (50 mA) output for powering sensors.
Monitor Production Line Down Time,Machine Run Time, or Cycle Time.
AE SERIES DISPLAYS are available with: 2.3", 4", 8", and 12" High Digits.
TWO YEAR WARRANTY
Available for all 2, 3, 4, 5, and 6 digit AE Series Displays
Displays Elapsed Time up to 99:59:59
Visible from 5 feet to 500 feet away...
AE SERIES - OPTION 373
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 7
AE122-373 12-Inch, Two Digit 24"W x 15"H x 3.5"DAE123-373 12-Inch, Three Digit 35"W x 15"H x 3.5"DAE124-373 12-Inch, Four Digit 48"W x 15"H x 3.5"DAE125-373 12-Inch, Five Digit 60"W x 15"H x 3.5"DAE126-373 12-Inch, Six Digit 72"W x 15"H x 3.5"D
AE82-373 8-Inch, Two DigitAE83-373 8-Inch, Three DigitAE84-373 8-Inch, Four DigitAE85-373 8-Inch, Five DigitAE86-373 8-Inch, Six Digit
AE42S-373 4-Inch, Two DigitAE43S-373 4-Inch, Three DigitAE44S-373 4-Inch, Four DigitAE45S-373 4-Inch, Five DigitAE46S-373 4-Inch, Six Digit
AE24-373 2.3-Inch, Four DigitAE26-373 2.3-Inch, Six Digit
12-Inch Run Time Accumulators
8-Inch Run Time Accumulators
4-Inch Run Time AccumulatorsSuper Bright Red, Dot LED's
2.3-Inch Run Time Accumulators
4-Inch Run Time AccumulatorsSuper Bright Red, Diffused Bar Segment LED'sAE42D-373 4-Inch, Two Digit 7.5"W x 6.1"H x3.5"DAE43D-373 4-Inch, Three Digit 12"W x 6.1"H x 3.5"DAE44D-373 4-Inch, Four Digit 16"W x 6.1"H x 3.5"DAE45D-373 4-Inch, Five Digit 24"W x 6.1"H x 3.5"DAE46D-373 4-Inch, Six Digit 24"W x 6.1"H x 3.5"D
Super Bright Red, Dot LED's
Super Bright Red, Dot LED's
AE24F-373 2.3-Inch, Four DigitFlush Mount
Wall MountBright Red, Diffused Bar Segment LED's
Option 373 accumulates elapsed time when the count input is active. This option is ideal formonitoring Production Run Time or Down Time. Opto-Isolated Inputs provide easy connection to drycontacts or 120 VAC signals for Count and Reset functions.
2, 3, 4, 5, or 6 digit models can be configured for various combinations of Hours, Minutes, andSeconds. For example a 4-digit model can be configured for Hours and Minutes (HH:MM) orMinutes and Seconds (MM:SS).Specify with your order.
RUN TIME ACCUMULATOR DISPLAYS
2121B-P Control, Red Push Button Switch, PlasticEnclosure, Flange Mount.Specify label:Reset, Run, Count, Hold, Increment, etc.
2122B-P Control, Keylock Switch, Plastic EnclosureFlange Mount.Specify label:Reset, Run, Count, Hold, Increment, etc.
2171-2 Pendant Control, provides one momentary andone latching push button switch.Handheld pushbutton control of the STDSeries Precision Timers and the AE SeriesRun Time Accumulators.Includes 10-foot, strain relieved cable.Enclosure: ABS plastic. 5.5”L x 2.5”W x1.2”D.
AE-OPT-273 RF Wireless Control (2 channel).Requires a minimum of one AERFTX2Handheld RF Remote Control per system.
AERFTX2 Handheld RF Remote Control (2 channel)
AE-OPT-PC8 8 foot power cord
AE-OPT-348 Master/Driver Output
AE-OPT-12V1 12 VAC, 60 HZ power
0900-7015 Power Module, 120VAC/12VAC, 500ma
0900-7025 Power Module, 120VAC/12VAC, 1A
1380-8442 Cable, 2 Conductor #22 Per Foot
Run Time Accumulator Options and Accessories
For pictures of select options and controls see page 40.
EL
AP
SE
D T
IME
RS
12"W x 6.1"H x 3.5"D14"W x 6.1"H x 3.5"D
7.5"W x 6.1"H x 3.5"D12"W x 6.1"H x 3.5"D16"W x 6.1"H x 3.5"D24"W x 6.1"H x 3.5"D24"W x 6.1"H x 3.5"D
13.4"W x 8.4"H x3.6"D
16"W x 10"H x 3.5"D24"W x 10"H x 3.5"D30"W x 10"H x 3.5"D37"W x 10"H x 3.5"D44"W x 10"H x 3.5"D
Standard Configuration: 120 VAC 60 Hz pigtails exit rear enclosure unless marked otherwise. See page 42 for optional power and mounting configurations.
12VAC ONLY
12VAC ONLYN E E D
A S S I S T A N C E ?CALL US.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 8
10ths and 100ths of SECONDS
AE Series Displays with Option 267 are used for counting up elapsed time in hundredths of seconds. They are available with digit heights of2.3", 4", 8", or 12", and in 2, 3, 4, 5, and 6 digit versions. Displays are factory configured in various combinations to display minutes, seconds,tenths of seconds, and hundredths of seconds (MM:SS.TH), depending on the number of digits. For example a 3-digit version could beconfigured to display seconds and tenths of seconds (SS.T), or seconds, tenths and hundredths of seconds (S.TH).
Standard models have pigtail lead wires for power and signal. All AE Series Displays require local power. Two controls are required. Connectyour dry contact controls (push button switches, limit switches, etc.) to the Start/Stop, and Reset pigtail wires. Controls can be located upto 100 feet away. In most applications 22 gauge wire is adequate for the signal inputs. Optional built-In controls and external control panelsare available.
Operation is similar to a stop watch. The Reset button sets the display to all zeroes. Pressing the Start/Stop button starts the elapsed timecount. Pressing it again, stops the count and holds the display. Pressing it again resumes the count up. The display will count up to themaximum count, roll over to zero, and continue to count if not stopped or reset.
Option 267 can also be added to any of the AE Series Multi-Function Clock/Timer Displays. In this case the standard presettable count upelapsed timer is replaced with the Option 267 elapsed timer.
For information on the AE Series Clock/Timers and Displays refer to the specific product brochures. For details on operation, refer to thespecific product manuals at www.ats-usa.com.
AE46S-267
OPTION 267 - PROVIDES TENTHS AND HUNDREDTHS OF SECONDS FOR COUNT UP ELAPSED TIMERS
OPT-251 Count Up Elapsed Timer (HH:MM:SS). May require fixed preset time.OPT-252 Count Down Elapsed Timer (HH:MM:SS). May require fixed preset time.OPT-267 Count Up Tenths and Hundredths of seconds (MM:SS:TH)
ELAPSED TIMERS
Count
Start/Stop
OR
ResetPLC
Options 251, 252, and 267 all require momentary inputs for the Start/Stop and Reset controls.
2, 3, 4, 5, or 6 digit models can be configured for various combinations of Hours, Minutes, and Seconds. For example a 4-digit model can beconfigured for Hours and Minutes (HH:MM) or Minutes and Seconds (MM:SS).Specify with your order.
Count Up or Count DownElapsed Time,
Cycle Time, Run Time,or Down Time
For programmable elapsed timers use the AE Series Multi-Function Clock/Timers. See pages 4-5.
For computer controlled elapsed timers see AE-OPT-354 on pages 12-13.
AE SERIES - OPTION 267
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 9
PENDANT CONTROLS
Handheld Pendant Controlsfor Elapsed Timers, Counters, and Production Monitors.
The 2171-1 provides handheld push button control for Start/Stop and Reset control of AE and CC Series Elapsed TimerDisplays. It can also be used for Count and Reset functions on AE Series Event Counters and Production Monitors.
The 2171-2 includes a momentary push button and a latching push button. It is ideal for handheld, push button controlof the STD Series Precision Timers and the AE Series Run Time Accumulators.
Both models have a strain relieved, 10 foot cable with pigtail lead wires. The cable can beextended up to 100 feet from the Display. For extension cable, use Belden 8443 (ATS P/N1380-8443) or equivalent.
Be sure to check your local codes for all wiring requirements.
Two Models Available:
High Impact Plastic Enclosure
2171-1 Provides Two Momentary Push Button Switches.
2171-2 Provides One Momentary, and One LatchingPush Button Switch.
Ten - Foot, Strain Relieved Cable
Durable, Comfortable handheld Control
Black ABS Plastic Enclosure measures 5.5"L x 2.5"W x 1.2"D. Tapered and conformed forhandheld applications.
Custom labels available.
The 2101 and 2102 Remote Switch Panels can be used with any of the AE Series Clock/Timer products in place of theBuilt-in Controls. The 2101 has a Keylock RUN/SET Switch to prevent unauthorized changes to the AE Device. The2102 has a Toggle Switch. Additional switch panels are available for other special functions. These Remote SwitchPanels can be located up to 100 feet away from the AE Series device.
REMOTE SWITCH PANELS
2101
2102
2101B-P
2102B-P
EL
AP
SE
D T
IME
RS
Remote Switch Panel for Multi-Function Clock/Timers -Keylock RUN/SET switch.
Remote Switch Panel for Multi-Function Clock/Timers -Toggle RUN/SET switch.
Remote Switch Panel for Multi-Function Clock/Timers -Keylock RUN/SET switch.
Remote Switch Panel for Multi-Function Clock/Timers -Toggle RUN/SET switch.
N E E DA S S I S T A N C E ?
CALL US.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
STD-525TMeasure and Display Accurate Elapsed Time in Minutes,
Seconds, Tenths of Seconds, and Hundredths of Seconds
Replaces Standard Electric Time models.No panel modifications are required.
Range 00.00.00 to 99.59.99MM.SS.TH
Accuracy .003%, +/- 1 digit.0.01 second resolution.
PRECISION TIMERSSTD-11-2
Measure and Display Accurate Elapsed Timefrom 0.000 to 9999.999 Seconds
Replaces Standard Electric Time models. No panel modifications are required.
Four (.56-inch high) bright red LED digits.
Four range settings.
Accuracy .003%, +/- 1 digit on any range.1-millisecond resolution.
TWO YEAR WARRANTY
10
2171-2 Provides One Momentary, and OneLatching Push Button Switch.See page 9 for details.
Handheld Pendant Controlsfor Elapsed Timers.
Black, high strength ABS plastic enclosure. Shelf mount or panel mount. ( 5"W x 5"H x 5"D).
Black, high strength ABS plastic enclosure. Shelf mount or panel mount. ( 5"W x 5"H x 5"D).
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
SPECIALS / OEM
11
SP
EC
IAL
S /
OE
M
Track Timers with arrow indicators
Line Frequency MonitorBar Code Counter InterfaceCustom Drum Timer
Hospital Timers
Alpha-Numeric Annunciators
Alpha-Code Clock
OEM Displays
ATS provides private-labeled and custom productsto meet your special requirements.
Modular products - easy to modify
Low setup costsQuick turn-around
Private labeled includinginstruction manuals,brochures, and drawings,
Drop shipped to your customer
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750812
SERIAL DATA INTERFACE
TWO YEAR WARRANTY
RS232 or USB INPUT
or
Send time or data to multiple displays throughout your facility.
ComputerPLC
MC Series Master Clock(with MC-OPT-354)
Multi-drop, multi-address, multi-mode:12 / 24 hour time, up / down elapsed time, ASCII, and number modes.
Two wire system - easily connects to PLC's, computers, master clocks, multi-media systems, andAE21 Display Controllers . Connect up to 50 AE devices to a
standard RS232 port, up to 2000 feet away. Expand the number of devices andthe distance using the AE-455DR6, Eight Channel RS232 Driver.
Keeps time and retains last data sent during power outages.
Available for all 2, 3, 4, 5, and 6 digit AE Series Displays
DISPLAY CONTROL TERMINAL - AE21 SERIES
Control AE Series RS232 Displays, Set Time, Send Numbers,Run Count Up and Count Down Elapsed Timers
AE21Terminal
CC2000 Series4" Display
AE Series8" Display
Each AE21 Display Control Terminal comescomplete with a power module and ten-foot
data cable.
Easily connect multiple displays of any size on one system using simple two-conductor cable, up to 2000feet away. All system displays require local power.
Ideal for computer or master clock controlled clock systems, timers, process indicators,and World Time Zone Clock Displays.
Menu Driven - Easy to Use
Set time in 12 or 24 hour format
Start count up elapsed timer from zero
Preset, start, stop, and resetcount down elapsed timer
Send up to six numbers
Send "Fire", "bELL", or"HELP" messages
Jody Mathews
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE122-354 12-Inch, Two Digit 24"W x 15"H x 3.5"DAE123-354 12-Inch, Three Digit 35"W x 15"H x 3.5"DAE124-354 12-Inch, Four Digit 48"W x 15"H x 3.5"DAE125-354 12-Inch, Five Digit 60"W x 15"H x 3.5"DAE126-354 12-Inch, Six Digit 72"W x 15"H x 3.5"D
AE82-354 8-Inch, Two DigitAE83-354 8-Inch, Three DigitAE84-354 8-Inch, Four DigitAE85-354 8-Inch, Five DigitAE86-354 8-Inch, Six Digit
AE42S-354 4-Inch, Two Digit 7.5"W x 6.1"H x 3.5"DAE43S-354 4-Inch, Three Digit 12"W x 6.1"H x 3.5"DAE44S-354 4-Inch, Four Digit 16"W x 6.1"H x 3.5"DAE45S-354 4-Inch, Five Digit 24"W x 6.1"H x 3.5"DAE46S-354 4-Inch, Six Digit 24"W x 6.1"H x 3.5"D
AE24-354 2.3-Inch, Four DigitAE2412-354 2.3-Inch, Six Digit
Digits 5&6 are 1-In.AE26-354 2.3-Inch, Six Digit
12-Inch Serial Input Displays
8-Inch Serial Input Displays
4-Inch Serial Input DisplaysSuper Bright Red, Dot LED's
2.3-Inch Serial Input Displays 4-Inch Serial Input DisplaysSuper Bright Red, Diffused Bar Segment LED'sAE42D-354 4-Inch, Two Digit 7.5"W x 6.1"H x3.5"DAE43D-354 4-Inch, Three Digit 12"W x 6.1"H x 3.5"DAE44D-354 4-Inch, Four Digit 16"W x 6.1"H x 3.5"DAE45D-354 4-Inch, Five Digit 24"W x 6.1"H x 3.5"DAE46D-354 4-Inch, Six Digit 24"W x 6.1"H x 3.5"D
Super Bright Red, Dot LED's
Super Bright Red, Dot LED'sAE24F-354AE2412F-354
Flush Mount
Wall MountBright Red, Diffused Bar Segment LED's
RS232 SERIAL INPUT DISPLAYS
13
AE-OPT-24VAC 24 VAC Operation (9W max)Call us for other available power options.
AE-OPT-PC8 8 foot power cord
0900-7015 Power Module, 120VAC/12VAC, 500ma
0900-7025 Power Module, 120VAC/12VAC, 1A
8901-1821 Power Supply, 24VAC, 200 VA8-Fused Outputs, 120 VAC Input
AE-455DR6 Eight Channel RS232 Driver.
AE21 Display Control Terminal for CC2000 andAE Series Displays with Option 354 Installed.
9110-1111 Cable Assembly, DB9M to DB9F
9110-1115 Cable Assembly, DB9F – Pigtail, 10 Ft.3 Wire: 2,3,5 with 4,6,8 jumpered.
9800-1010 ATS Software
AE-OPT-348 Master/Driver Output
AE-OPT-376 Relay Output, SPDT
Serial Input Display Options and Accessories
For pictures of select options and controls see page 40.
8 - CHANNEL RS232 DRIVER
AE-455DR6
Eight RS232 Output Drivers
Connects to the RS232 output of yourcomputer or MC Series Master Clocks.
One RS232 Input connects to TDX andCommon of the host device.
Eight, RS232 Driver Ouputs Connect up to 50 AE and/or CC Series
devices to each output.
Terminal Block Wiring.
12 VAC Powered - 120 VAC to 12 VAC, 60HZ Power Module is provided.
Sturdy, Painted Steel Enclosure withKnockouts.
Dimensions: (9" W x 12" H x 4" D)
Each driver output provides data forup to 50 AE or CC Devices.
SE
RIA
L I
NT
ER
FA
CE
USB Interface Low CostEasy to install
16"W x 10"H x 3.5"D 24"W x 10"H x 3.5"D 30"W x 10"H x 3.5"D 37"W x 10"H x 3.5"D 44"W x 10"H x 3.5"D
12"W x 6.1"H x 3.5"D12"W x 6.1"H x 3.5"D
14"W x 6.1"H x 3.5"D
13.4"W x 8.4"H x3.6"D13.4"W x 8.4"H x3.6"D
2.3-Inch, Four Digit 2.3-Inch, Six Digit Digits 5&6 are 1-In.
Use with any AE Series Large Displayor Clock/Timer with the Option 354
Serial Data Interface
For AE Series Large Displays,World Time Zone Clocks,
and MC Series Master clocks
Standard Configuration: 120 VAC 60 Hz pigtails exit rear enclosure unless marked otherwise. See page 42 for optional power and mounting configurations.
12VAC ONLY
12VAC ONLY
AE26R-354
Rack Mount
19"W x 3.5"H x6"D 2.3-Inch, Six Digit
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750814
ANALOG INPUT
Available for all 2, 3 , 4, 5, and 6 digit AE Series Displays
Wide range of input signals: 0-20 mA, 4-20 mA, 0- 5 vdc, or 0-10 vdc
12 - Bit A/D Converter (4096 count resolution)
Built-in Controls for easy scaling and calibration
Range can be scaled from " - " to " + " indication
Overrange and Underrange indications
Selectable decimal point and leading zero blanking
Set digits 5 and 6 for degrees C or F indication, or fixed zeroes
Optional Master / Driver Output for multiple display systems
AE Series Displays are available with: 2.3", 4", 8", and 12" High Digits
YOURSIGNAL CONDITIONER,
TRANSMITTER , OR PLC
TWO YEAR WARRANTY
0-10 VDC
0-20 MA
SCALE AND DISPLAYTEMPERATURE, PRESSURE, FLOW, LEVEL
FROM 5 FEET TO 500 FEET AWAY...
0-5 VDC
4-20 MA
AE SERIES - OPTION 341
4-20 mA 0-5 VDC
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 15
OPT-317 Temperature Indicator (Includes Sensor, Specify 0 to 212 F or 0 to 100 C)
TEMPERATURE INDICATORSAdd Option 317 to any 2, 3, or 4 digit AE Series Display to make a large digit temperature display.
AE Series Display with Option 341 can be used with a variety of temperature modules for displaying a specific temperaturerange. Two are listed below, call for other types of modules.
Add AE-OPT-341 to any AE Series Display for displaying Temperature, Pressure, Flow and otherprocess variables (12 bit A/D - 4096 count resolution). Built-in controls provide easy scaling andcalibration. Other features include: Overrange and Underrange indications, selectable decimalpoint, leading zero blanking, degrees C and F indicators, and fixed 00's.
Add this Option to any 2, 3, or 4 digit AE Series Display with up to 12" high digits. Range can becalibrated for up to 4 digits maximum. Additional digits, up to six maximum, may be required for "-" to "+" ranges, or for fixed 00's, or degrees C and F indicators.
Option 341 does not read negative signals, but can be scaled for negative to positive indications.
A 4 to 20 mA signal could be displayed with a range of -500 to 500, where 4 mA would be -500, 12mA would be 000, and 20 mA would be 500.
ANALOG INPUT DISPLAYS
AE-OPT-348 Master/Driver Output
AE-OPT-317 Temperature Indicator with Sensor -
Specify 0-212 F or 0-100 C
0900-7015 Power Module, 120VAC/12VAC, 500ma
0900-7025 Power Module, 120VAC/12VAC, 1A
AE-OPT-PC8 8 foot power cord
Analog Input Display Options and Accessories
For pictures of select options and controls see page 40.
4-20
mA
0-
5 V
DC
AE122-341 12-Inch, Two Digit 24"W x 15"H x 3.5"DAE123-341 12-Inch, Three Digit 35"W x 15"H x 3.5"DAE124-341 12-Inch, Four Digit 48"W x 15"H x 3.5"DAE125-341 12-Inch, Five Digit 60"W x 15"H x 3.5"DAE126-341 12-Inch, Six Digit 72"W x 15"H x 3.5"D
AE82-341 8-Inch, Two DigitAE83-341 8-Inch, Three DigitAE84-341 8-Inch, Four DigitAE85-341 8-Inch, Five DigitAE86-341 8-Inch, Six Digit
AE42S-341 4-Inch, Two Digit 7.5"W x 6.1"H x 3.5"DAE43S-341 4-Inch, Three Digit 12"W x 6.1"H x 3.5"DAE44S-341 4-Inch, Four Digit 16"W x 6.1"H x 3.5"DAE45S-341 4-Inch, Five Digit 24"W x 6.1"H x 3.5"DAE46S-341 4-Inch, Six Digit 24"W x 6.1"H x 3.5"D
AE24-341 2.3-Inch, Four DigitAE2412-341 2.3-Inch, Six Digit
Digits 5&6 are 1-In.AE26-341 2.3-Inch, Six Digit
12-Inch Analog Input Displays
8-Inch Analog Input Displays
4-Inch Analog Input DisplaysSuper Bright Red, Dot LED's
2.3-Inch Analog Input Displays 4-Inch Analog Input DisplaysSuper Bright Red, Diffused Bar Segment LED'sAE42D-341 4-Inch, Two Digit 7.5"W x 6.1"H x3.5"DAE43D-341 4-Inch, Three Digit 12"W x 6.1"H x 3.5"DAE44D-341 4-Inch, Four Digit 16"W x 6.1"H x 3.5"DAE45D-341 4-Inch, Five Digit 24"W x 6.1"H x 3.5"DAE46D-341 4-Inch, Six Digit 24"W x 6.1"H x 3.5"D
Super Bright Red, Dot LED's
Super Bright Red, Dot LED'sAE24F-341AE2412F-341
Flush Mount
Wall MountBright Red, Diffused Bar Segment LED's
16"W x 10"H x 3.5"D 24"W x 10"H x 3.5"D 30"W x 10"H x 3.5"D 37"W x 10"H x 3.5"D 44"W x 10"H x 3.5"D
12"W x 6.1"H x 3.5"D12"W x 6.1"H x 3.5"D
14"W x 6.1"H x 3.5"D
13.4"W x 8.4"H x3.6"D13.4"W x 8.4"H x3.6"D
2.3-Inch, Four Digit 2.3-Inch, Six Digit Digits 5&6 are 1-In.
Standard Configuration: 120 VAC 60 Hz pigtails exit rear enclosure unless marked otherwise. See page 42 for optional power and mounting configurations.
12VAC ONLY
12VAC ONLY
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
COUNTERS
SOUP
COUNT EVENTSDISPLAY PRODUCTION COUNT
FROM 5 FEET TO 500 FEET AWAY...EASILY CONNECTS TO A VARIETY OF INPUT DEVICES INCLUDING:
PUSH BUTTON SWITCHES, PHOTO-ELECTRICS, LIMIT SWITCHES, AND PLC'S.
ISOLATED INPUTS FOR COUNT AND RESET ALLOW FOR LONG WIRE HOOKUP.
ADAPTS TO ALL TYPES OF SIGNALS SUCH AS:
DRY CONTACTS, TTL, 6V to 120V DC PULSES, OR 12V to 120V AC SIGNALS.
RETAINS COUNT ON POWER OUTAGES,
PROVIDES 12 TO 15 VDC OUTPUT TO POWER SENSORS.
SELECTABLE LEADING ZERO BLANKING.
OPTIONAL MASTER / DRIVER OUTPUT FOR MULTIPLE DISPLAY SYSTEMS.
SOUP SOUP SOUP SOUP
AE SERIES - OPTION 230
UP / DOWN COUNTERSAE SERIES - OPTION 483
COUNT PRODUCTION, SUBTRACT REJECTS
VISIBLE FROM 5 FEET TO 500 FEET AWAY...
COUNT REJECT
EASILY CONNECTS TO A VARIETY OF INPUT DEVICES INCLUDING:
PUSH BUTTON SWITCHES, PHOTO-ELECTRICS, LIMIT SWITCHES, AND PLC'S.
ISOLATED INPUTS - ALLOWS FOR LONG WIRE HOOKUP.
ADAPTS TO ALL TYPES OF SIGNALS SUCH AS:
DRY CONTACTS, TTL, 6V to 120V DC PULSES, OR 12V to 120V AC SIGNALS.
RETAINS COUNT ON POWER OUTAGES,
PROVIDES 12 TO 15 VDC OUTPUT TO POWER SENSORS.
SELECTABLE LEADING ZERO BLANKING.
OPTIONAL MASTER / DRIVER OUTPUT FOR MULTIPLE DISPLAY SYSTEMS
16
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE122-230 12-Inch, Two Digit 24"W x 15"H x 3.5"DAE123-230 12-Inch, Three Digit 35"W x 15"H x 3.5"DAE124-230 12-Inch, Four Digit 48"W x 15"H x 3.5"DAE125-230 12-Inch, Five Digit 60"W x 15"H x 3.5"DAE126-230 12-Inch, Six Digit 72"W x 15"H x 3.5"D
17
AE82-230 8-Inch, Two DigitAE83-230 8-Inch, Three DigitAE84-230 8-Inch, Four DigitAE85-230 8-Inch, Five DigitAE86-230 8-Inch, Six Digit
AE42S-230 4-Inch, Two DigitAE43S-230 4-Inch, Three DigitAE44S-230 4-Inch, Four DigitAE45S-230 4-Inch, Five DigitAE46S-230 4-Inch, Six Digit
AE24-230 2.3-Inch, Four Digit 12"W x 6.1"H x 3.5"DAE26-230 2.3-Inch, Six Digit 14"W x 6.1"H x 3.5"D
12-Inch Event Counters
8-Inch Event Counters
4-Inch Event CountersSuper Bright Red, Dot LED's
2.3-Inch Event Counters
COUNTER DISPLAYS
4-Inch Event CountersSuper Bright Red, Diffused Bar Segment LED'sAE42D-230 4-Inch, Two DigitAE43D-230 4-Inch, Three DigitAE44D-230 4-Inch, Four DigitAE45D-230 4-Inch, Five DigitAE46D-230 4-Inch, Six Digit
Super Bright Red, Dot LED's
Super Bright Red, Dot LED's
AE24F-230 2.3-Inch, Four Digit 13.4"W x 8.4"H x3.6"D
Flush Mount
Wall MountBright Red, Diffused Bar Segment LED's
Add AE-OPT-230 or AE-OPT-483 to any AE Series Display for event counter applications. Easily
connects to a variety of input devices such as push button switches, limit switches, photo-electrics,
and transistor outputs from PLC's, etc. Input signals: 12V AC or DC to 120V AC or DC, > 20 msec.
duration. A 12-15 VDC (100 Ma) output is provided for powering small solid state sensors or photo-
electrics.
AE-OPT-PC8 8 foot power cord
AE-OPT-348 Master/Driver Output. Sends display data toother AE Series Large Displays with Option349 installed.
AE-OPT-376 Relay Output, SPDT (15 Amps, 120 VAC or24 VDC) Typical wiring is provided by pigtaillead wires. Specify wiring configurationwith your order.
0900-7015 Power Module, 120VAC/12VAC, 500ma
0900-7025 Power Module, 120VAC/12VAC, 1A
8975-1001 Photo-Electric Sensor(Microswitch MHP-D33L)
2106 Control Station, 2-Button Count and Reset
Control, Red Push Button Switch, PlasticEnclosure. Flange Mount.Specify label:Reset, Run, Count, Hold, Increment, etc.
Control, Keylock Switch, Plastic EnclosureFlange Mount.Specify label:Reset, Run, Count, Hold, Increment, etc.
Pendant Control, provides two momentary pushbutton switches. Handheld pushbutton controlfor Start / Stop and Reset control of AE and CCSeries Elapsed Timer Displays. Controls Countand Reset functions on AE Series EventCounters and Production Monitors. Enclosure:Black, ABS plastic. 5.5”L x 2.5”W x 1.2”D.
Event Counter Options and Accessories
For pictures of select options and controls see page 40.
EV
EN
T C
OU
NT
ER
S
For the Up/Down Counter Option, change the suffix "230" to "483".
16"W x 10"H x 3.5"D24"W x 10"H x 3.5"D30"W x 10"H x 3.5"D37"W x 10"H x 3.5"D44"W x 10"H x 3.5"D
7.5"W x 6.1"H x 3.5"D 12"W x 6.1"H x 3.5"D 16"W x 6.1"H x 3.5"D 24"W x 6.1"H x 3.5"D 24"W x 6.1"H x 3.5"D
7.5"W x 6.1"H x 3.5"D 12"W x 6.1"H x 3.5"D 16"W x 6.1"H x 3.5"D 24"W x 6.1"H x 3.5"D 24"W x 6.1"H x 3.5"D
2121B-P
2122B-P
2171-1
NEED ASSISTANCE?CALL US.
Standard Configuration: 120 VAC 60 Hz pigtails exit rear enclosure unless marked otherwise. See page 42 for optional power and mounting configurations.
12VAC ONLY
12VAC ONLY
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
PRODUCTION MONITORS
Monitor Production "GOAL" and "ACTUAL" Performance
Computer Interface forData Acquisition and Control
The AE44-503J provides: a programmable pace that automatically paces the "GOAL" display, a "COUNT" input that increments the countby one each time the input is activated, a "RUN/HOLD" switch to hold the pace during breaks or down periods, and separate "RESET"buttons for both the "GOAL" and "ACTUAL" displays. Painted Steel Enclosure (24"W x 18"H x 4"D).
Built-In Controlsfor Stand-Alone Operation
Four-Inch High LED Digits . .Red for Goal, Green for Actual
Visible up to 150 feet
Production GOAL automaticallyadvances at a programable pace
For Computer Control and Data Acquisition.
AEQuerySoftware
9200-0509
Using your computer, set the display parameters, and collect Goal, Count, and Run Time data from up to 32 AE44-503J Production Monitors. Requires AEQuery Software and one 9200-0509, RS232 to RS485 Adapter persystem.
RS232 to RS485Adapter
Add the Optional 2121B-P Remote COUNT Switch
The AE44-503J has an Opto-Isolated "COUNT" Input that can be connected to a variety of push-buttons, limitswitches, or control equipment.
AE14-503J Two Line Production Monitor with 1-Inch Digits.AE44-503J Two Line Production Monitor with 4-Inch Digits.
9200-0509 RS232 to RS485 Adapter for AEXX-503J Series.9800-1010 ATS Software. Includes AE Query program.
Control and Data Acquisition Software for AE44-503J Displays.
18
AE44-503J
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
PRODUCTION MONITORS
Used with the AE-503DX1 Remote Display Interface
MONITOR PRODUCTION "GOAL"and "ACTUAL" PERFORMANCE
Four-Inch High, LED DigitsRed for Goal, Green for Actual
Visible up to 150 feet.
AE-503DX1 Controller
Rugged Steel Enclosure24"W x 18"H x 4"D
EASILY CONFIGURED TO YOUR NEEDS.
The AE-503DX1 provides a programmable pace thatautomatically paces the "GOAL" display, a RUN/HOLDswitch to hold the pace during breaks or down periods,and separate RESET buttons for both the GOAL andACTUAL displays. Count Up and Count Down push-buttons or signals are connected to the AE-503DX1. Itthen sends all data to the AEXX-503C Displays atdistances up to 2000 feet away. The RS485 I/O portallows it to be connected to a PC for data acquisition(Requires AEQuery Software).
Tote Board Displays - Configured to your requirements.
The "GOAL" and "ACTUAL" counts can be sent via RS232 from your Computer, PLC, a Tote BoardDisplay, or other production monitor displays up to 2000 feet away. Uses the same data signal asthe popular AE Series Option 354 Displays.Call for Details.
AE44-503CDual Line Display
AE44-503C SERIES
19
PR
OD
UC
TIO
N M
ON
ITO
RS
The AE4X46-503J shown above is made up of 24, Four-Digit Displays with 4-Inch high Red and Green LED digits.Dimensions: 144"W x 32"H x 3.5"D
CONNECTS TO COMPUTER, PLC, OR AE503DX1.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
NEMA 4X DIGITAL CLOCKS
12 or 24 Hour Format.
Maintains time in memory during power outages - No Batteries.
STAINLESS STEEL - NEMA 4XDigital Clocks for Harsh Environments
Serial Data, 59th Minute, and Midnight/Noon Correction.
IDEAL FOR:
Food Processing Plants,
Hose Down Locations,
and Harsh Environments.
Synchronize to computer or master clock.
Simple Surface Mount Installation.
AE16B-AE24B-AE2412B-AE42SB-AE44DB-OPT-FC
BEZEL MOUNT DISPLAYS - NO ENCLOSURESBezel Mount Versions are available for many of the AE Series Large Displays for mounting in user suppliedequipment or enclosures. Only a few are listed below.Call us for your specific requirements.
Typical rear view of an AE43SB
AE2412B
AE16B
20
CC2001N4X
One Inch, Six Digit, 12 VAC powered.2.3-Inch, Four Digit, 12 VAC powered.2.3-Inch, Six Digit, One-Inch Seconds, 12 VAC powered.Four Inch, Two Digit, 12 VAC powered.Four Inch, Four Digit, 12 VAC powered.Add Front Panel Controls (for Multi-Function Clock/Timer, only)
CC2001N4X NEMA 4X Digital Clock 120 VAC 60 Hz (16"W x8"H x 6"D)
CC2002N4X NEMA 4X Digital Clock 24 VAC 60 Hz (16"W x8"H x 6"D)
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 21
SPECIAL ENCLOSURESOptional NEMA 12 and NEMA 4X Enclosures
for AE2X , AE4X, and 8X Series DisplaysFor some applications where the environment is rough, or where there are hose down requirements,special enclosures may be required. Optional NEMA 12 and NEMA 4X Enclosures are availablefor most AE2X, AE4X, and AE8X Series Large Displays. All AE Series functions are availableincluding Multi-Function Clock/Timers, Counters, 4-20 mA Process Indicators, RS232 Input Dis-plays, and other special functions.
NEMA 12 Painted Steel(shown with an AE26 installed)
AE-OPT-N4XA NEMA 4X Stainless Steel Enclosure (16"W x 8"H x 6"D)AE-OPT-N4XB NEMA 4X Stainless Steel Enclosure (24"W x 8"H x 6"D)
AE-OPT-N12A NEMA 12 Painted Steel Enclosure (16"W x 8"H x 6"D)AE-OPT-N12B NEMA 12 Painted Steel Enclosure (24"W x 8"H x 6"D)
NEMA 12 Painted Steel(shown with an AE44S installed)
NEMA 4X Stainless Steel(shown with an AE44D installed)
Specify one of these options when a NEMA enclosure is required
NE
MA
En
clo
sure
s
NEMA 4X Stainless Steel(shown with an AE85 installed)
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750822
AP21LV TIME SWITCH
Up to 30 powerful program steps - 210 events per week.
Up to 10 annual skip plans for skipping holidays and special events.
Easy - Autoprompt Programming.
Powerfail Backup. Keeps Time and Program for 48 hours .NO BATTERIES REQUIRED!
Programmable, Automatic Daylight Savings Time, and Leap Year adjustment.
Relay Output - 15 amp SPDT Latched or 0-99 second momentary operation.
Dual Power - 24 VAC, 60 HZ or 12 VDC (Power Module is included).Separate models are not required. 50 HZ optional.
Low Power - Ideal for solar applications.
LOW VOLTAGE TIME SWITCH.
BELL PROGRAMMER SYSTEMAP21-BP1 BELL PROGRAMMER SYSTEM
TWO YEAR WARRANTY
The AP21-BP1 Bell Programmer System provides an Easy to Install Plug
and Play solution for ringing bells in small schools and factories.
The system consists of an AP21LV Time Switch mounted in a keylocked box (7"W x 12"H x 4"D), pre-wired to a Six-InchBell and a 120 VAC to 24 VAC power module. A 15 foot cable is included so the bell can be located up to 15 feet from thekeylocked box.
Mounting hardware is included. Simply hang the enclosure and bell, plug it in and enter your program. See the AP21LV
brochure and manual at www.ats-usa.com for more details on programming and operation.
Single Schedule, Single Zone with up to 30 Bell rings per day.
Plug and Play. No Wiring Required.
Includes all the features of the AP21LV Time Switch.
AP21-BH1 EXTRA LOUD BREAK BUZZER SYSTEM FOR INDUSTRIAL WORK AREAS
Similar to the AP21-BP1, but has a 100dB Buzzer instead of a
bell. Includes AP21LV Time Switch, F-350-24 Buzzer, Heavy
Duty Power Module, and 100 feet of cable.
Buzzer must be mounted at least 10 feet
above employee work area.
RING BELLS.. CONTROL LIGHTING AND SECURITY EQUIPMENT.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
BELL PROGRAMMER SYSTEM
The MC41-BP1 Bell Programmer System provides an Easy to Install Plug and Playsolution for ringing bells in small schools and factories.
The system consists of an MC41LV Master Clock mounted in a keylocked box (7"W x 12"H x 4"D), andpre-wired to a 24 VAC Six-Inch Bell. A 15 foot cable is included so the bell can be locatedup to 15 feet from the keylocked box. Powered with a 24 VAC power module (included).
The MC41LV Master Clock can be used as a four circuit time switch with four relays.The MC41-BP1 is pre-wired to relays 1 and 2 for two different bell durations,
leaving three additional relays for future applications.
Mounting hardware is included. Simply hang the enclosure and bell, plug it in and enter your program.
See the MC41LV brochure and manual for more details on programming and operation.
MC41-BP1BELL PROGRAMMER SYSTEM
PLUG and PLAY - NO WIRING REQUIRED . . .
Multi-Schedule, Single Zone with
up to 100 Bell rings per day.
Programmable for multiple bell ring durations.
Annual Programming and Custom Weeks
Includes all the features of the MC41LV Master Clock.
TWO YEAR WARRANTY
EXTRA BELL ASSEMBLIES
F-4436-24A1
One F-4436-24A1 can be added to the AP21-BP1 or MC41-BP1 Bell Programmer.
23
Tim
e S
wit
ch /
Bel
l P
rog
ram
mer
s
Multi-Schedule
PLUG AND PLAY MODELS AVAILABLE
AP21-BP1 30 rings with 6-Inch Bell
AP21-BH1 30 rings with Extra Loud Buzzer
MC41-BP1 100 rings with 6-Inch Bell
MC41-BH1 100 rings with Extra Loud Buzzer
Six-Inch, 24 VACBell with 100 feet
of cable.
Multiple Bell and Buzzer Systems are available using the MC4181N Series Master Clock.However, an electrician will be required to insure proper wiring and installation. Consultyour system installer, or call us for more information.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750824
MASTER CLOCKS
Corrects all major analog and digital secondary clocks,including AE Series RS232 Clocks and CC2000 Series.
LOW COST, EASY SOLUTIONS TO FIT ANYSIZE SYSTEM. Ideal for Schools, Hospitals,Factories ....
RING BELLS - CONTROLCLOCK SYSTEMS
Multi-Zone, Multi-Schedule - Four and Eight Circuit models provide AnnualProgramming with up to 100 events per day.
Non-Volitile Memory - Keeps time and program for indefinite power outages.
Heavy Duty Relays rated at 48 VAC - 15 AMPMC4181N
MC81LV
MC41LV
Automatic Daylight Savings Time and Leap Year Correction.
Rack Mount, Wall Mount and Compact Wall Mount units are available in Fourand Eight Circuit (Zone) versions.
Options available for some models, including:
RS232 I/O for remote PC programming using MCPROGRAMMINGSoftware and for driving AE and CC Series RS232 Clock Displays
Built-In AC and DC Power Supplies for driving secondary clocks and bells.Connectors and Wiring Harnesses.
120 VAC - 50 Hz, 220 VAC- 60 Hz or 220 VAC- 50 Hz operation.(24 VAC - 60 HZ is standard on most models)
MC4181LV
18:01:20 18:01:20
18:01:20
AE SERIES OR CC2000 SERIES CLOCKS
MC4181LV
18:01:20 18:01:2018:01:20
Can be interfaced to most time and attendance systems.
Sample Applications ... Call us for your application.
MC4181N W/ OPTION 354 AE SERIES OR CC2000 SERIES CLOCKS
Free Software
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
Program Up to 100 Events per Day plus Secondary Clock Correction. Up to 200 Powerful Program Steps (Events) and20 Annual Plans (Schedules). Programmable, Automatic Daylight Savings Time Adjustment. Easy to Program -AutoPrompt Programming and Alpha-Numeric display.
MC4181N-4 Master Clock, 4 SPDT Outputs
Wall Mount Enclosure (12"W x 16"H x 4.5"D) with Conduit Knockouts on all sides, top, bottom and back. 4 and 8 Circuit Models with Up to100 Events/Day, Built-in Correction Modes. 120 V 60 HZ .
MC41LV / MC81LV SERIES
MC4181N SERIES WALL MOUNT MODELS
MC41LV Master Clock, 4 SPDT Outputs,Up to 100 Events/Day, Built-inCorrection Modes. Power -24 VAC, 60 HZ.Terminal Block Wiring.Enclosure - 4.75" W x 8" H x 2"D.
Multi-zone, Multi-schedule.... Ring Bells, Correct Secondary Clocks, Control LightingLOW COST, Calendar Programmable, Solid State, - Ideal for Schools, Hospitals, Factories
Built-In Secondary Clock Correction Modes Include:Mode 1 Synchronous wired - Dukane 57th Min 24EF214AMode 2 Synchronous wired - Simplex 59th Min (D10)Mode 3 Minute Impulse - Cincinnati D3Mode 4 Minute Impulse - Cincinnati D2, D4Mode 5 Synchronous wired - Cincinnati D8Mode 6 Synchronous wired - Dukane 57th Min 24EF212
Automatic, 10-Year Back-up System. Keeps Time and Programs During Power Outages - NO BATTERIES.Adjustable Pulse (Momentary) Output from 1 to 9 Seconds for Bell Ringing or Control. Four and Eight Circuit Models.15 Amp SPDT Relay Outputs. Optional RS232 I/O Interface for driving system clocks and data communication.
Mode 7 Synchronous wired - Standard ElectricMode 8 Bi-Polar Minute Impulse - Franklin Mark 5M / ATS SC5AMode 9 Minute Impulse - Cincinnati D6Mode 10 Synchronous wired - National E-SRX SeriesMode 11 Minute Impulse - Standard Electric Time AR-2 and AR-3Opt 354 Works with all ATS AE and CC Series Digital Clocks.
MC81LV Master Clock, 8 SPDT Outputs, Up to100 Events/Day, Built-in CorrectionModes. Power - 24 VAC, 60 HZ .Wiring - Two, 48" Connector / CableWiring HarnessesEnclosure - 4.75" W x 8" H x 3.2"D.
MC41-091
MC-OPT- 011 Built-in 24 VAC, 2 Amp Power Supply forbells / clocks (MC4181-4 and MC4181N only).
MC-OPT- 012 Built-in 24 VDC, 2 Amp Power Supply forbells / clocks (MC4181-4 and MC4181N only).
MC-OPT- 013 Built-in 24 VAC and 24 VDC, 2 AMP PowerSupplies for bells / clocks (MC4181N only).
MC-OPT- 014 Built-in 24 VDC, .75A Power Supply forclock circuits (MC4181-4 and MC4181N only).
MC-OPT- 016 Built-in 24 VAC, 4 Amp Power Supply(MC4181N only).
MC SERIES OPTIONS AND ACCESSORIES
MC4181N-8 Master Clock, 8 SPDT Outputs
MC-OPT- PWR1 120 VAC 50 HZMC-OPT- PWR2 220 VAC 50 HZ
RS232 I/O Interface for MC Series Master Clocks
The RS232 I/O Interface is included with the MC4181LV Master Clock, but can be added as an option (MC-OPT-354) to the MC4181N Series MasterClocks. This interface provides several system functions. The Master Clock can be programmed from a computer using MCPROGRAMMINGSoftware (included on 9800-1010, ATS Software). Using other utility programs provided on 9800-1010, time and date can be sent to RS232 digitalclocks such as the AE Series and CC2000 Series System Clocks, and/or to a computer. If desired, your computer may be used as the master clock.9800-1010 ATS Software is available at no charge.
25
Built-in Power Supplies
Optional Power
9800-1010 ATS Software, includes MCPROGRAMMING Software and Utilty Programs for sending time and date to and from a computer.
MC4181LV RACK MOUNTFits standard 19" equipment rack. 8 Circuits with Up to 100 Events/Day, Built-in Correction Modes. (19"W x 3.5"H x 9"D)
MC4181LV
MC-OPT- 354 Add RS232 I/O Interface (MC4181N and MC4181-4 only).
Mas
ter
Clo
cks
MC41 with Built-In 24 VDC,(.75A) Power Supply.Corrects up to (75) SC5ASecondary Clocks.Powercord (120 V, 60 HZ).Enclosure - 4.75" W x 8" H x 3.2"D.
Low Voltage, 8 SPDT Outputs.RS232 I/O Interface connects to computers, masterclocks and digital clocks (see description below).
Free Software
**
* These options apply to theMC4181N models only.
N E E DA S S I S T A N C E ?
CALL US.
MCProgramming Software is included (P/N 9800-1010)Powered by a 12 VAC, 60 HZ. Power Module (included).Optional power Modules are available for 220 V, 50Hz
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
CC2002 Wall Mount, 24 VAC, 60HZ*(12"W x 6.1"H x 3.5"D)
CC2002W2 2-Sided Wall Mount, 24 VAC, 60HZ*(12"W x 6.1"H x 3.5"D)
CC2002C2 2-Sided Ceiling Mount, 24 VAC,60HZ*(12"W x 6.1"H x 3.5"D)
CC2000 SERIES - Low Cost, 4-Inch, 4-Digit System ClocksBuilt-In 59th Minute, Midnight/Noon, & RS232 Correction.. 12 or 24 Hour Format.
CC2002 Series - Low Cost, 4-Inch, Digital Secondary Clocks. 24 VAC models are available. A 12 volt to 48 volt, AC orDC pulse on the correction input automatically corrects for 59th minute or Midnight/Noon correction (depending onpulse duration). A separate input allows for RS232 control and correction. Easily controlled using any of the MC SeriesMaster Clocks or computer.
CC2002F Flush Mount 24 VAC, 60HZ*(13.4"W x 8.4"H x 3.6"D)
CC2002H Sloping Front Wall Mount, 24 VAC, 60HZ*(12"W x 6.25"H x 3.25"D)
See our 24 VAC Power Supply (8901-1821) on page 29.
26
SYSTEM CLOCKS - CC2000 Series
FOR SCHOOLS, HOSPITALS, FACTORIES,SPORTS FACILITIES, THEATERS,
BOARDROOMS, CHURCHES,and MUSEUMS.
FOUR INCH, FOUR DIGITLOW COST, LOW VOLTAGE,
SYSTEM CLOCKS
CC2002W2 2-Sided Wall Mount
CC2002 Wall Mount
CC2002F Flush MountCC2002C2 2-Sided Ceiling Mount
CC2002H Sloping Front
SYSTEM CLOCKS CC186 SERIES1.8 INCH, 6 DIGIT - RS232 CONTROLLED, SYSTEM CLOCKSFor Studios, Courtrooms, Museums, Theaters, Boardrooms, and Churches.
12 / 24 Hour Format... RS232 Controlled.Bright Red Diffused LED Digits - Visible over 50 feet away.
Capacitive Backup - No Batteries Required.Stand Alone, Wall Mount, and Double Sided models.
CC186 Series System Clocks can be manually set, or set and controlled via RS232 communications. All CC186 Series System Clocks canreceive serial data input from computers or other controllers, for setting time and/or displaying short messages such as "FirE" and "bELL". Upto 50 clocks can be connected to a standard RS232 Port at distances of up to 2000 feet away. Signal drivers are available for adding additionalclocks and greater distances.
Low Voltage : 12 VAC Powered.
MODELS AVAILABLEAll CC186 Series Clocks have a black anodized aluminum enclosure (12"W x 3.5"H x 3.5"D) with 1/8" red acrylic lenses.
CC186 System Clock, Single Sided, (w/ rubber feet), 12 VACCC186/2 System Clock, Double Sided, (w/ rubber feet), 12 VAC1210-0102 Optional Mounting Angles for bottom and top mounting applications (Two Required).1220-0303-2 Optional Wall Mount Plate for side mounting applications.
Easily Connect to Computers, Master Clocks, or other system controllers via RS232.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 27
AE84-354 SYSTEM CLOCK
Eight Inch High Digits
SUPER BRIGHT RED Dot LED's
4 and 6 Digit Models Available
Visible up to 350 feet
AE126-354 SYSTEM CLOCK
Twelve Inch High DigitsSUPER BRIGHT RED Dot LED's
4 and 6 Digit Models Available
Visible up to 500 feet
Easily Connect to Computers, Master Clocks, or other system controllers via RS232.
EIGHT and TWELVE INCH SYSTEM CLOCKSIdeal for Gyms and Cafeterias
Specifications
120 VAC, 60 Hz Operation (24VAC and other power optional)
Simple two-wire Data Input - Receives standard ATS 10-Byte control messagesfrom ATS MC Series Master Clocks, from your computer or other host device
via RS232 up to 2000 feet away.
Free AECOMM Software - send time, messages,count up, and count down elapsed time from your computer.
Black Anodized Aluminum Wall Mount EnclosuresTwo-Sided Versions and optional mounting hardware are available.
TWO YEAR WARRANTY
AE124-354 SYSTEM CLOCK
Sys
tem
Clo
cks
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
DISPLAY GUARDS
DG-0716
HEAVY DUTY POLYCARBONATE DISPLAY GUARDS
Light weight, strong, easy to install . . . Unobstructed view .
Heavy Duty, Clear Polycarbonate Guard designed to protectAE Series Clocks and Displays.
Mounts to the wall, totally independent of the clock or fixture for maximum protection.
DG-1232
For AE Series2.3-Inch and 4-Inch Clocks and Displays.
Also works with CC Series.Size is 16"W x 7"H x 4"D
For AE Series 12-InchClocks and Displays.
Size is 50"W x 17"H x 4"D
DG-0716
DG-1232
DG-1750
For AE Series 8-InchClocks and Displays.
Size is 32"W x 12"H x 4"D
SBG10Wire Guard For AE Series 8-Inch
Clocks and Displays.Size is 35"W x 20"H x 8"D
WG-2091Wire GuardFor AE Series
2.3-Inch and 4-Inch Clocks andDisplays.Also works with CC Series.Sizes is 17"W x 8"H x 5"D
28
WG-2091
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
Eight, 24 VAC Fused Ouputs.Terminal Block Wiring.
120 VAC, 60 HZ Input
Sturdy, Painted Steel Enclosurewith Knockouts.
Dimensions: (12" X 12" X 4")
Power for up to (25)CC2002 Series System Clocks,
or F-44XX-24 Bells
Power for Bells, Clocks and Other Low Voltage Equipment
24 VAC, 200 VA (8 Amps )
BELLS & HORNS
F-4436-24
6" and 10", 24 VAC BELLS
Easy to install. Mounts on standard 4" box
Low operating currentHigh dB output
The F-4436 and F-4431 Series Bells provide an easy low cost solution for all bell ringing applications. They are availablein 24 VAC versions. They are easily controlled using any of the MC Series Master Clocks, or for smaller schools orfactories the AP21 Time Switch can be used. 24 VAC bell systems require a transformer. The size is determined bythe number of bells on the system. ATS provides an optional, 2 amp built-in, bell transformer for some of the MC SeriesMaster clocks (drives up to six bells). External mounted transformer assemblies such as the 8901-1821 can be usedfor larger systems. For Plug-n-Play Bell systems see the Bell Programmers on pages 22 and 23.
F-350-24
F-3014
F-3014
29
Clo
ck /
Bel
l Sys
tem
Acc
esso
ries
F-4436-24 Bell, Six-Inch, 24 VAC .17 amps, 91dB typical at 10 ftF-4431-24 Bell, Ten-Inch, 24 VAC .17 amps, 94 dB typical at 10 ft
F-350-24 Buzzer, High Output, 24 VAC, .9 amps, 100 dB typical at 10 ftF-350-120 Buzzer, High Output, 120VAC, .18 amps, 100 dB typical at 10 ft
8901-1821 POWER SUPPLY ASSEMBLY
Cast aluminum weatherproof box for 1/2" conduit.
4" , 24 VAC and 120 VAC HORNS
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
RS232 >>>
MC4181N W/ OPTION 354
18:01:20 18:01:2018:01:20
AE SERIES OR CC2000 SERIES CLOCKS
COMPUTER BASED CLOCK SYSTEMS
18:01:20 18:01:2018:01:20
AE SERIES OR CC2000 SERIES CLOCKS
RS232 >>>
Use your Computer as a Master Clock.
Up to 2000 feet
Up to 2000 feet
18:01:2018:01:20 RS232 >>>
Up to 2000 feet18:01:20 18:01:20
AE-455DR6
EIGHT
18:01:20 18:01:20
Up 50 AE or CC2000 Seriesat up to 2000 feet, each circuit
All System Clocks require local power.
All System Clocks require local power.
SMALL SYSTEMS
LARGE SYSTEMS
COMPLETE CLOCK AND BELL SYSTEMS
Using programs provided on ATS Software Disk, 9800-1010 you can send your computer's time toa variety of System Clocks throughout your facility. Up to 50 AE Series Clocks with Option 354,and/or CC2000 Series System Clocks can be connected to a single RS232 port at distances up to2000 feet away. For more clocks and greater distance, add the AE-455DR6 I/O Expander for eightadditional circuits, each of which can drive up to 50 System Clocks at up to 2000 feet. See pages12-13 and 26-27 for System Clocks.
ATS Software Disk, 9800-1010 for controlling master clocks and system clocks is available with clocksystem purchases, or can be downloaded from our website at www.ats-usa.com.The CD-ROM provides numerous programs to meet a variety of clock system applications. They arecompatible with all AE Series and CC2000 Series System Clocks, including World Time Zone Clocksand Date Displays.
FREE SOFTWARE
CIRCUITS
30
All System Clocks require local power.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 31
Clo
ck S
yste
ms
18:01:20 18:01:20
GPS-427A GPS Antenna/Receiver Wall Mount (5"W x 5"H x 3"D).AE2412R-427A GPS Master Clock, Rack Mount (19"W x 5.2"H x 3"D).AE26R-427A GPS Master Clock, Rack Mount (19"W x 3.5"H x 6"D).9800-1010 ATS CD ROM Software for setting Computers Time and Date from a GPS Master Clock
AE26R-427A
MC4181 W/ OPTION 354, SEE PAGE 17
AE SERIES OR CC2000 SERIES CLOCKS
AE Series GPS Systems provide accurate time of day, traceable to NIST, for single digital clocks orcomplete bell/clock systems. All AE Series and CC2000 Series System Clocks are compatiblewith the GPS System
Send Accurate GPS Time and Date to all the clocks and computers throughout your facility ...
Compatible with all AE Series and CC2000 Series System Clocks, including World TimeZone Clocks and Date Displays
GPS-427A
Each system requires a GPS-427A Antenna/Receiver and a GPS Master Clock.Choose either the AE2412R-427A or the AE26R-427A GPS Master Clock.
The GPS-427A Antenna / Receiver receives (UTC) Universal Coordinated Time from the GPS(Global Positioning Satellite) system, and provides a series of NMEA sentences for the AE SeriesGPS Master Clock, or for a computer.
The AE Series, GPS Master Clock constantly analyzes the data from selected NMEA sentencesfor signal quality, and to be sure it has locked on to at least three satellites. It then extracts UTC fromthese data for use by the system. After a satelite signal is obtained, a “Locked On” indication isprovided by illuminating the decimal point on the sixth digit. Time is then updated each minute at the30th second. A programmable, time zone offset is entered to provide local time for any world timezone. This offset is added to the Hours of the UTC. The RS232 serial data output provides localtime, date, Julian date, and day of the week data that can be displayed on unlimited numbers of AESeries, or CC2000 Series Remote Displays. For analog clock correction and bell ringing applica-tions, this output can be connected to an MC Series Master Clock with the RS232 I/O Optioninstalled. MC Series Master Clocks provide clock correction outputs such as 59th Minute correctionfor three-wire, synchronous, analog secondary clocks, and bell circuit outputs.
For System Clocks and Displays choose any of the AE Series Displays with Option 354 installed,or any of the CC2000 Series System Clocks.
18:01:20
GPS BASED CLOCK SYSTEMS
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750832
GPS-TR3 MASTER CLOCK INTERFACE
Complete clock systems are available for any sizefacility or campus. Call for details.
For Factories, Schools, Hospitals,Military Installations and more.
The GPS-TR3 System includes the GPS-427A Antenna / Receiver and theGPS-TR3 Interface.
Accurate GPS Time for clock systems, master clocks,computers, and other time based equipment.
Easy to install.
Includes 59th Minute, Midnight, andSerial Data Correction.
GPS-TR3 tracks the Atomic Clock,Provides user selected
correction for most analog anddigital clock systems
DigitalClock
MC4181LV, SEE PAGE 24
DateDisplay
JulianClock
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 33
Ideal for Boardrooms,Hotels, Trading Rooms,
and Multi-NationalCompanies ....
TIME ZONE MASTER CLOCKGPS-427A
MC4181-388
MC4181-388 World Time Zone Master Clock, Rack Mount. Controls AE Series System Clocks (up to 15 zones) Built-In RS232 I/O port.
Standard power is 12VAC, 60 Hz. A 120/12VAC Power Module is provided that uses a standard 120 VAC power outlet (95 VAC to 135VAC,60 Hz at 5 VA maximum). For optional powered units (220 VAC and 50 Hz), refer to the option addenda provided.
A DB9 connector mounted on the back panel provides the RS232 I/O connection. The RS232 I/O is also available on the terminal blockson the back panel.
Anodized aluminum enclosure that measures 19”W x 3.5”H x 9”D. Rack mounts in a standard 19” equipment rack. Mounting ears areincluded.
Features:
Built-In World Time Zone Plans, including seasonal offsets, for most major cities.
Line synchronous time keeping for long term accuracy.
Non-Volatile Memory keeps time and stored programs for indefinite power outages.
Options include: GPS Antenna/Receiver for reference to UTC.
Computer Interface for setting time from your PC.
Controls all ATS AE Series World Time Zone Clocks.
Programmable Offsets from GMT, Including 1/2 Hour Offsets.
Programmable Seasonal Time Changes for up to 15 DifferentWorld Time Zones. . . Including Leap Year Correction.
Non-Volatile Memory - Keeps time and program for indefinitepower outages. No Batteries required.
Rack Mount, 12 VAC, 60 HZ Powered, Optional 50 HZ.
MC4181N-388 Wall Mount, 120 VAC Version - Also Available.
Optional GPS Interface-Automatically tracks the Atomic Clock.
GP
S I
nte
rfac
e /
Tim
e Z
on
e M
aste
r C
lock
NEEDASSISTANCE?
CALL US.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
WORLD TIME ZONE CLOCKS
TWO YEAR WARRANTY
Optional GPS Antenna / Receiver tracks the Atomic Clock.
Stand-alone Versions, orComplete Master Clock or Computer Controlled SystemsProgrammable Offsets from GMT and Seasonal Adjustments.
Attractive Black Anodized Aluminum EnclosuresFrom one zone to ten zones in a single enclosure.
Enclosures can be stacked end to end or on top of each other as required.
Synchronized Time For Up To 24 World Time Zones
12 or 24 Hour Format - With or Without Seconds.
2.3", 4", 8" and 12" High Super Bright LED DigitsVisible from 5 feet to 500 feet away.
Optional Name RailsOptional Name Rails with Labels can be attached to any 4", 8", or 12" models.
(Not required for 1" and 2.3" models)
For Boardrooms, Trading Rooms, Hotel Lobbies, Airports, Zulu Clocks.
8" Digits, Five Zones (186"W x 16.1"H x 3.5"D). Shown with optional name rail for zone labels.
4" Digits, Nine Zones (180"W x 6.1"H x 3.5"D). Shown with optional name rail for zone labels.
34
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE24-388-2 World Time Zone Clock, Two Zones, 2.3-Inch Digits. Hour and Minutes (HH:MM). Wall Mount (24"W x 6.1"H x 3.5"D).AE24-388-4 World Time Zone Clock, Four Zones, 2.3-Inch Digits. Hour and Minutes (HH:MM). Wall Mount (48"W x 6.1"H x 3.5"D).AE24-388-10 World Time Zone Clock, Ten Zones,
SOME TYPICAL MODELS WITH 2.3" HIGH DIGITS:
AE44D-388-2 World Time Zone Clock, Two Zones, 4-Inch Digits. Hour and Minutes (HH:MM). Wall Mount 42"W x 6.1"H x 3.5"D).AE44D-388-4 World Time Zone Clock, Four Zones, 4-Inch Digits. Hour and Minutes (HH:MM). Wall Mount 84"W x 6.1"H x 3.5"D).AE44D-388-5 World Time Zone Clock, Five Zones,AE44D-388-6 World Time Zone Clock, Six Zones,
Up to ten, 2.3" - four digit zones are available in one enclosure. Time Zone Name Labels are includedand are placed on the lens under each zone. Name Rails are not required.
SOME TYPICAL MODELS WITH 4" HIGH DIGITS:Up to six, 4" - four digit zones are available in one enclosure. Time Zone Name Labels are included,which can be placed on the wall, above or below the unit. Optional Name Rails may be required.
SYNCHRONIZED TIME ZONE DISPLAYS
Sample Models
LOCAL ZULU
AE24-388-2 2.3" Digits, Two Zones (24"W x 6.1"H x 3.5"D)
AE24-388-4 2.3" Digits, Four Zones (48"W x 6.1"H x 3.5"D)
EST CST MST PST
AE44D-388-4 4" Digits, Five Zones (84"W x 6.1"H x 3.5"D).
AE44D-388-5 4" Digits, Five Zones (107"W x 6.1"H x 3.5"D). Shown with optional name rail for zone labels.
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5
35
OPTIONAL NAME RAILS
Name Rails are factory attached to the bottom of World
Time Zone Clocks, Julian / Project Completion Clocks, and
other special displays. Includes labels.
AE4X-NR42 Name Rail 24" to 48" W x 3.15"H x 3.5"DAE4X-NR84 Name Rail 49" to 84" W x 3.15"H x 3.5"DAE4X-NR108 Name Rail 85" to 120" W x 3.15"H x 3.5"DAE4X-NR120 Name Rail 85" to 120" W x 6.1"H x 3.5"D
Tim
e Z
on
e C
lock
s
2.3-Inch Digits. Hour and Minutes (HH:MM). Wall Mount (112"W x 6.1"H x 3.5"D).
4-Inch Digits. Hour and Minutes (HH:MM). Wall Mount 107"W x 6.1"H x 3.5"D).4-Inch Digits. Hour and Minutes (HH:MM). Wall Mount 120"W x 6.1"H x 3.5"D).
Call for your requirements
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
COUNCIL CHAMBER TIMER
AE21, Controller
For City Council Chambers, Boardrooms, Courtrooms, and Conference rooms.
SIX DIGIT CLOCK / TIMER SYSTEM
CC Series Clock / Timer Systems function as 12 or 24 hour stand-alone or secondary clocks, andsimultaneously as presettable up or down counting elapsed timers. All clock and timer functions areprogrammed and controlled from the AE21 Terminal. Each system requires one AE21 Terminaland one or more CC Series Displays.
Time Speakers, Meetings, Proceedings
Plug and Play - Easy to Install - Easy to Use
Display 12 or 24 Hour Time of Day,Count Up or Count Down Elapsed Time
Attractive Desk-Top Terminal Controls all FunctionsUp to 2000 Feet Away
Models:
AE21 Desk-Top Terminal with back-lighteddisplay, 12 VAC power module and 10-foot datacable are included. Extended cables available.
CC186 Single Sided Display with Six 1.8" HighRed LED Digits, 12 VAC power module is included.
CC186/2 Double Sided Display with Six 1.8" HighRed LED Digits per side, 12 VAC power module isincluded.
36
SE
E O
TH
ER
TIM
ER
S O
N P
AG
ES
4-1
1
CC186 Display
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
AE127-515 Seven Digit Project Completion, 12 Inch Digits with Name Rail
AE29-479A Nine, 2.3-Inch High Digits. Days, Hours, Minutes, and Seconds (DDD HH:MM:SS). (30"W x 6.1"H x 3.5"D).AE49D-479A Nine, Four-Inch High Digits. Days, Hours, Minutes, and Seconds (DDD HH:MM:SS). (48"W x 6.1"H x 3.5"D).AE89-479A Nine, Eight-Inch High Digits. Days, Hours, Minutes, and Seconds (DDD HH:MM:SS). (86"W x 10"H x 3.5"D).AE129-479A Nine, Twelve-Inch High Digits. Days, Hours, Minutes, and Seconds (DDD HH:MM:SS). (120"W x 15"H x 3.5"D).
Julian and Project Completion Clocks are available in Stand-Alone and Computer Controlled versions with digit sizes ranging from
2.3 Inches to 12 Inches high. 120VAC/60Hz power cord included. Some Wall Mount displays are listed below.
PROJECT CLOCK / JULIAN CLOCK
Shows the remaining number of days, hours, minutes andseconds to project completion date, or upcoming event.
Great for advertising and promotions.
Super Bright red LED Digits - 2.3", 4", 8" or 12" high.
Attractive, black anodized aluminum enclosures to fit any decor.
JULIAN CLOCK - Shows the day of the year, and time of day inhours, minutes and seconds, in 24 hour format.
Count Down to Project Completion ...or use it as a JULIAN CLOCK
37
Pace Counters
Or. . Set Production Pace, Growth, Dollars Spent, Hamburgers Served, etc
From 2 digits to 12 digits in sizes ranging from 2.3 inches high to 12 inches high.
Stand-Alone and Computer Controlled Versions. Call for details.
AE127-515 Seven, Twelve-Inch High Digits. Hours, Minutes, and Seconds (HHH:MM:SS). (84"W x 15"H x 3.5"D).E
ven
t T
imer
s
World Population Counter
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750838
NUMERICAL CALL SYSTEM
NF21Terminal
CC2002 Series4" Display
AE Series8" Display
Call parents to the nursery. Display hymn numbers. Announce "NOW SERVING"
For churches, waiting rooms, restaurants, shipping areas.
Call people bynumber, quietly . . .
Basic NF21 System includes (1) NF21 Terminal with power moduleand cable and (1) CC2002 System Display.
NF21 System with add-on display. Includes (1)NF21 Terminal with power module and cable,
(1) CC2002 Display, and (1) AE83-354 Display.
NF21 Desktop Terminal for NF21 Numerical Call System. Includes: 12 VAC Power Module (ATS P/N 0900-7015) and 10-Foot SignalCable. For additional data cable use Belden 8442 (or equivalent) two-conductor cable.
CC2002 System Display, Four 4-Inch Digits, Wall Mount, 24 VAC (12"W x 6.1"H x 3.5"D). 24 VAC Power Modules are available.
NF21 Series Numerical Call Systems - consist of an NF21 Terminal and one or more CC2000 Series Displays and/orAE Series Displays with Option 354 (RS232 Input) installed. A 12 VAC power module is provided for powering the NF21Terminal. All system displays are connected in parallel to the signal output cable using simple, two-conductor cable.A ten-foot data cable with phone jack is provided to connect the terminal to the field wiring. Use Belden 8442 orequivalent (ATS P/N 1380-8442) to extend the signal wiring to the system displays up to 2000 feet from the terminal.Each system display requires local power.
TWO YEAR WARRANTY
ALPHA-NUMERIC DISPLAYAN86P Multi-FunctionClock / Timer / Display
Black Panel Mount Enclosure144mm x 72mm x 170mm Conforms to DIN 43700
Six 0.8 - Inch Alpha-Numeric Characters
BRIGHT RED 16-Segment LED's
User Selected Functions
Four or Six Digit Multi-Function Clock/Timer with Midnight, 59th Min. and RS232 Correction.Displays time of day in 12 or 24 Hour format. Counts UP and Counts DOWN Elapsed Time withPresets and Alarms. Also Functions as a Serial Data Display for displaying production or processdata, time, and messages from your computer or PLC.
Six Character Serial Data Display/Timer
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508 39
ALPHA-NUMERIC DISPLAYSDM3X SERIES
The DM3X Series Display Modules are designed to provide special, alpha-numeric displays with as few asone character, or up to 250 characters. Each character is individually addressed by the control program ordedicated controller.
For example, up to 50, five-character displays in 50 different locations, each with its own message, can beconnected to a single controller or computer.
Three-Inch High, 5 x 7 dot matrix characters withSuper Bright Red LED's.
Use with your PC - FREE Software is provided, or use a custom AE21Desk-Top Terminal with your specific functions built-in.
TWO YEAR WARRANTY
Cal
l Sys
tem
s / A
lph
a-N
um
eric
Dis
pla
ys
AN2X SERIES
2.3-Inch High, 16-Segment characters withSuper Bright Red LED's.
Six characters standard. Custom versions up to 90 characters.Use for clocks, timers, counters and message displays. Stand-alone or with RS232 Input.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750840
AE SERIES OPTIONS AND ACCESSORIES
Control, Red Push Button Switch, PlasticEnclosure. Flange Mount. Specify label:Reset, Run, Count, Hold, Increment etc.
Control, Keylock Switch, Plastic Enclosure Flange Mount.Specify label: Reset, Run, Count, Hold, Increment etc.
0900-7015 Power Module, 120VAC/12VAC, 500ma0900-7025 Power Module, 120VAC/12VAC, 1A0900-7080 Power Module, 24VAC, 500 mA0900-7084 Power Module, 24VAC, 1.66 Amp 40 VA
Screw Terminals
2101 Remote Switch Panel with key-lock SET switch
2102 Remote Switch Panel with toggle SET switch
2102B-P
RF Wireless Control (2 channel).Provides wireless control of the Start/Stop and Resetfunctions of the elapsed timer.Requires one AERFTX2 Handheld RF Remote Control.
Handheld RF Remote Control (2 channel).
Pendant Control, provides two momentary pushbutton switches. Handheld pushbutton controlfor Start / Stop and Reset control of AE and CCSeries Elapsed Timer Displays. Controls Countand Reset functions on AE Series EventCounters and Production Monitors. Enclosure:Black, ABS plastic. 5.5”L x 2.5”W x 1.2”D.
Pendant Control, provides one momentary andone latching push button switch. Handheldpushbutton control of the STD Series PrecisionTimers and the AE Series Run Time accumulators.Includes 10-foot, strain relieved cable.Enclosure: Black, ABS plastic.5.5”L x 2.5”W x 1.2”D.
9200-0509 RS232 to RS485 Adapter for AEXX-503J Series.
AE-OPT-348 Master/Driver Output. Sends display data toother AE Series Large Displays with Option349 installed.
MASTER (OPT 348) REMOTE #40 (OPT 349) REMOTE #1 (OPT 349)
1000 ft - 3-conductor, 22 AWG
AE-OPT-349 Remote Display - Displays data sent fromany AE Device with Master/Driver Output.
Control Station (2101 Keylock) Plastic Enclosure– Flange Mount
Control Station (2102 Toggle) Plastic Enclosure– Flange Mount
2101B-P
2121B-P
2122B-P
AE-OPT-273
AERFTX2
2171-1
2171-2
Call forEuropean or UK Versions
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
9800-1010 ATS SOFTWARE
AECOMMIncludes programs for controlling all
AE and CC Series Displays with the RS232Interface Option.
For Clock Systems, Time ZoneClocks, Elapsed Timers, and Production
Displays Systems.
MCPROGRAMMINGComplete program control for MC Series
Master Clocks. Create and store unlimited bellprograms. Upload and download using your
PC's RS232 port.
Includes utilities for setting your PC's time froman MC Series Master Clock or GPS TimeProduct and setting an MC Series Master
Clock from your PC.
ATS WEBSITE ON DISKVisit our website for product brochures,manuals,drawings and software without
getting online.
AE PACEFor controlling ATS Production Monitors.Program for setting unit's GOAL count.
AE QUERYAE Capture Application for
Production Monitors.Program for acquiring unit data.
Also Includes:AE Utilities, MC Utilities, TR Comp
Programs and Utilities for ATS Master Clockand Display Systems
41
You can also find the current ATS Catalog on Disk.
FREE
with purchase
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750842
AE SERIES PRODUCTS ARE CONFIGURED FOR YOUR NEEDS
AE SERIES Large Displays are available with 2.3", 4", 8" and 12" high digits as Clocks, Timers,Counters, Process Indicators and Serial Input Displays.
Most models are built to meet your specific requirements from pre-assembled, Off-The-Shelfcomponents and subassemblies, enabling rapid delivery and competitive pricing.
The standard Black Anodized Aluminum Enclosure is suitable for Stand-Alone or Wall Mountapplications. Wall Mount Brackets are provided for mounting to a single or double gang box.Optional enclosures such as flush mount, rack mount, and NEMA rated enclosures are available.See page 21 for optional NEMA rated enclosures.
Typical Wiring is provided by labeled, pigtail lead wires as shown below.
Optional wiring is also available.
Built-In Controls
Standard Wall Mount Bracket andPigtail Lead Wires
Optional Eyehooks Optional Stud Mounts Flush Mount Enclosures
Choose the required power: Standard models come with 120 VAC, 60 HZ power. Optional power, suchas 12 VAC, 12 VDC, 220 VAC and 50 HZ is available for most models. Power cords and power modulesare also available.
Sloping Front Displays Stacked Enclosures
Optional Hub Mount
Power: 120 VAC, 60 HZ - Pigtails exit through rear of enclosure.Enclosure: Standard black anodized aluminum enclosure.Mounting: ATS standard wall mount brackets are included with AE Series displays.
AE Series Standard Configuration
N E E DA S S I S T A N C E ?
CALL US.
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-7508
ABOUT APPLIED TECHNICAL SYSTEMSAPPLIED TECHNICAL SYSTEMS, a Shreveport, Louisiana Corporation, was founded in1987 as a manufacturer of high quality electronic systems and equipment. Our initialemphasis began with a line of programmable TIME SWITCHES and later developed into acomplete line of time control and display products, including customized systems to meetspecific requirements, including OEM applications. Our products are in use in schools,hospitals, factories, churches, military installations, government offices, museums, majortheme parks and boardrooms all across the United States and in countries around the world.
Many ATS products are shipped the same day the order is received. Some of our productsare configured to our customer's specific needs. These are built from pre-assembled, off-the-shelf components and subassemblies, enabling rapid delivery and competitive pricing.
You will be delighted with the features and quality of our TIMERS, CLOCKS and DIGITALDISPLAYS. To help you or your customer make the final buying decision, ask about ourdemo program.
For your convenience, we accept American Express, MasterCard or Visa. Net thirty dayterms are available with approved credit.
Also, prices, specifications, user's manuals and application notes on ATS products areavailable on the internet at: www.ats-usa.com
Please call us at 800-444-7161 for any additional information.
We are very proud of our reputation for quality and performance.
All ATS products carry a Two Year Unconditional Warranty.
43
www.ats-usa.com800-444-7161 FAX: 318-797-4864
BOX 5705 ll SHREVEPORT, LOUISIANA. 71135 phone: 318-797-750844
NOTES