table of contentspdf.lowes.com/howtoguides/697285500037_how.pdf · 2014-08-06 · adapters, caps,...
TRANSCRIPT
2
Table of Contents
SYSTEM DATA SHEET ................................................................................................................................... 3
ENGINEERING SPECIFICATIONS .................................................................................................................... 4
THE SHARKBITE DESIGN (1/4” – 1”) .............................................................................................................. 7
WHY SHARKBITE? ........................................................................................................................................ 7
CONNECTING A SHARKBITE FITTING ............................................................................................................. 8
DISCONNECTING A FITTING.......................................................................................................................... 9
SHARKBITE SLIP PRODUCTS ......................................................................................................................... 9
SHARKBITE SLIP PRODUCTS ....................................................................................................................... 10
SHARKBITE FOR CONCEALED AREAS ........................................................................................................... 11
DIMENSIONS ............................................................................................................................................. 11
PRESSURE LOSS AND FLOW RATES ............................................................................................................. 13
ASSE 1061 TESTING .................................................................................................................................... 15
THE SHARKBITE 2XL DESIGN (1-1/4” – 2”) .................................................................................................. 18
WHY SHARKBITE 2XL? ................................................................................................................................ 19
HOW TO MAKE A SHARKBITE 2XL CONNECTION ......................................................................................... 20
DISCONNECTING A SHARKBITE 2XL CONNECTION ...................................................................................... 21
SHARKBITE 2XL DIMENSIONS ..................................................................................................................... 22
SHARKBITE 2XL PRESSURE LOSS AND FLOW RATES ..................................................................................... 23
SHARKBITE PEX TUBING ............................................................................................................................. 25
PEX PIPE SPECS AND DIMENSIONS ............................................................................................................. 27
PROJECT PROFILE ....................................................................................................................................... 29
PROJECT PROFILE ....................................................................................................................................... 30
IAPMO RESEARCH AND TESTING, INC. ........................................................................................................ 31
WARRANTY ............................................................................................................................................... 36
3
SYSTEM DATA SHEET
System Description The SharkBite Push-Fit quick-connect plumbing system is the easiest and most dependable way to join copper, CPVC or PEX pipe in any combination—with no soldering, clamps, unions or glue. Available in an assortment of over 200 fittings and sizes ranging from ¼” to 2” copper tube size (CTS). Applications Tubing: Hard drawn copper pipe Type K, L and M and annealed Type M not to exceed 3/8 nominal complying with ASTM B 88, PEX tubing complying with ASTM F 876 or CSA B137.5, or CVPC tubing complying with ASTM D 2846 or CSA B137.6. SharkBite fittings are approved for installations above and below ground applications. Please consult with local code for final approval. Failure to comply with the above types of pipe or application could result in connection failures. Operating Parameters Operating Pressure: 200 PSI Max Operating Temperature: 200°F Max Approved Applications Potable Water Hydronic Heating (w/ Glycol
concentration up to 100%)
System Benefits Instant push-fit connection for
increased ease of use No soldering, clamps, unions or
glue needed
Reduces installation time with no
tightening of nuts, clamps and
unions.
Connects three types of pipe in any combination
No mapping of system Can be installed wet or dry Rotatable after installation Approved for behind the wall and
underground applications. Removable after installation Clean, professional installation
Fittings SharkBite push-fit fittings are available in 200+ configurations including: Couplings, Elbows, Tees, Reducers, Threaded Adapters, Caps, Stops, Stub Outs, Ball Valves, Slips, Water Heater Hoses and Valves with SharkBite Connections. Made from Lead Free Dezincification Resistant (DZR) brass and available in sizes ¼” – 2” CTS. Push-to-Connect Technology The SharkBite fitting works via a two stage process that ensures a quick, easy connection. The tubing passes through the
release collar and then through the stainless steel grab ring.
The tube is pushed through an o-ring protector that aligns the tube. It then passes through a specially formulated o-ring that compresses between the pipe and the wall of the fitting before it reaches the tube stop.
How to Make a Connection
1. Cut the pipe. Make sure the cut is square and even.
2. Deburr the end of the pipe to remove any sharp edges. Sharp edges can cut the o-ring and lead to leaks.
3. Mark the pipe with the proper insertion depth (see below for reference).
4. Push the pipe into the fitting. The mark made on the pipe should rest against the collar of the fitting, ensuring a proper seal.
FITTING SIZE INSERTION DEPTH
1/4” 0.813” 3/8” 0.875”
1/2” 0.938”
5/8” 1.125”
3/4” 1.125”
1” 1.313”
1-1/4” 2.000”
1-1/2” 2.250”
2” 2.500”
Tube Liner SharkBite fittings ranging in sizes 3/8” to 1” come with an integral tube liner preinstalled for use with PEX pipe. SharkBite sizes 1-1/4” to 2” do not come with tube liners preinstalled and are sold separately. The tube liner must be used when PEX piping is utilized. Tools Tools are available to make the installation process easier. SharkBite depth & deburring tool for
1/4” to 1” CTS SharkBite depth & deburring tool for
1-1/4” to 2” CTS SharkBite disconnect clip (1 size per
tubing) SharkBite disconnect tongs (1 size
per tubing) History SharkBite was launched in the Australian market in 1999 and in the North America market in 2004, ushering in a new way to do plumbing. Reliance Worldwide, an ISO 9001 organization, is one of the world’s largest manufacturers of thermostatic water control valves and has been a major world supplier of hot water safety valves for over 50 years. Warranty SharkBite fittings carry a 25 year warranty against any manufacturer’s defect as long as the item has been installed per installation instructions and comply with local code. Please contact Customer Service for more information. IAPMO
http://pld.iapmo.org/default.asp (Select Listee Name and enter “Reliance Worldwide”)
For more information on SharkBite products, contact: Reliance Worldwide Corporation 2727 Paces Ferry Road Building 2, Suite 1800 Atlanta, GA 30339 United States: 1-877-700-4242 Canada: 1-888-820-0120 Web: www.sharkbite.com
8/6/2014
4
ENGINEERING SPECIFICATIONS
The push-fit fitting shall be installed on hard drawn copper type K, L and M complying with ASTM B88, cross-linked polyethylene pipe (PEX) complying with ASTM F 876 or CSA B137.5 or CPVC piping complying with ASTM D 2846 or CSA B137.6. The fitting shall be made of lead free dezincification brass and compliant with ASSE 1061, NSF/ANSI 61 and NSF/ANSI 372. The fitting shall consist of an EPDM O-ring, a grade 316 stainless steel grab ring, and contain a polysulfone tube liner for PEX applications. The fitting shall be used in a potable water system or a hydronic heating water distribution up to 200 psi and 200°F. The fitting shall be a SharkBite fitting.
PART 1: GENERAL 1.1 SUMMARY
A. Push-Fit Connection System for Potable Water Distribution and Hydronic Heating Water Distribution 1.2 DEFINITIONS
A. ASME: American Society of Mechanical Engineers B. ASSE: American Society of Safety Engineers C. ASTM: American Society for Testing and Materials D. CSA: Canadian Standards Association E. EPDM: Ethylene Propylene Diene Monomer F. IAPMO: International Association of Plumbing and Mechanical Officials G. NSF: National Sanitation Foundation
1.3 REFERENCES
A. ASSE 1061: Performance Requirements for Push-Fit Fittings B. NSF/ANSI Standard 61: Certification for Drinking Water System Components – Health Effects C. NSF/ANSI Standard 14: Plastics Piping System Components and Related Materials D. NSF/ANSI Standard 372: Lead Content Certification E. ASTM B 88: Standard Specifications for Seamless Copper Water Tube F. ASTM F 876: Standard Specification for Cross-linked Polyethylene (PEX) Tubing G. CSA B137.5: Cross-linked Polyethylene (PEX) Tubing Systems for Pressure Applications H. CSA B137.6 I. ASTM D 2846: Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot-and Cold-Water
Distribution Systems. J. IAPMO: Uniform Plumbing Code K. IAPMO: National Plumbing Code of Canada L. IAPMO: International Plumbing Code M. AWWA C904: Cross-Linked Polyethylene (PEX) Pressure Pipe, ½ In. (12mm) Through 3 In. (.76 mm) for Water
Service.
1.4 QUALITY ASSURANCE A. Installer shall be well informed on installation instructions prior to installing. B. The installation of tubing and fittings for hot and cold water distribution systems shall conform to the
requirements of the ICC International Plumbing Code or IAPMO Uniform Plumbing Code. C. The piping shall be cut square, even and have no rough edges.
8/6/2014 8/6/2014
5
1.5 WARRANTY
A. SharkBite Push-Fit Fittings have a 25 year limited warranty from point of sale. B. All products must be installed in accordance with all applicable codes and in accordance with any local,
state, provincial or federal requirements. C. The installing contractor must use construction techniques compliant with applicable codes to install the
range of products and use the product(s) within the design parameters specified in any installation guidelines and technical notes for the applicable system. This shall include field pressure testing prior to concealing with concrete or by other means.
D. Products must not be installed in a system that may operate at temperatures or at pressures that exceed the printed rating on the product, packaging or installation instructions.
E. Evidence of tampering, mishandling, neglect, accidental damage, freeze damage or unauthorized modifications or repairs that cause damage to RWC warranted products void any warranty coverage of those particular products. It is expressly understood that failure as a result of any freezing fluids within the pipes does not constitute a defect in material or workmanship and shall not be covered by this warranty.
F. Although RWC provides a plumbing system to facilitate a complete installation, other manufacturers tubing and/or fittings may be installed in any given installation provided manufacturing of the tubing and/or fittings demonstrates compliance with the applicable ASTM standards, and the product has been certified by a recognized third-party testing agency. The RWC product in the given installation will continue to be covered under this warranty. NOTE: RWC will be responsible only for proven defects in material or workmanship in RWC products. Problems in products manufactured by another company should be reported to that manufacturer.
G. For full warranty information, please see page 30. PART 2: PRODUCTS 2.1 MANUFACTURERS A. RWC, 2727 Paces Ferry Road, Building 2, Suite 1800, Atlanta, GA 30339 Telephone: 1-877-700-4242, Website: www.sharkbite.com 2.2 MATERIAL
A. Tubing Standard: Copper tubing shall be hard drawn Type K, L, or M and annealed Type M copper complying with ASTM B 88.
B. Tubing Standard: Cross-linked polyethylene pipe (PEX) shall conform to ASTM F 876 or CSA B137.5.
C. Tubing Standard: CPVC tubing shall conform to ASTM D 2846 or CSA B137.6. D. O-ring shall be made from EPDM. E. Grab ring shall be made from Grade 316 Stainless Steel. F. Push-fitting: Brass fitting shall comply with ASSE 1061 and NSF/ANSI 61.
2.3 SOURCE QUALITY A. All fittings in contact with drinking water shall be listed by a third party agency to NSF 61.
8/6/2014
6
PART 3: EXECUTION 3.1 EXAMINATION
A. If installing PEX pipe, ensure that the tube liner has been installed. B. Ensure the fitting is free from any damage, including but not limited to damaged or missing O-ring, cracked
brass forging or deformed grab ring. 3.2 PREPARATION
A. The tubing shall be cut square to ensure a proper connection. B. The tubing shall be free of dirt, debris or scale buildup. Any burrs shall be removed using a deburring tool. C. Mark the piping to use as verification of proper insertion into the fitting.
3.3 INSTALLATION A. Push-fit fitting shall be installed in accordance with the manufacturer’s installation instructions. B. Pressure Rating: Install components having a pressure rating equal to or less than the system operating
pressure. C. Threaded Joints: Threaded joints shall have thread seal tape applied to the male threads only. Tighten joint
with a wrench and backup wrench as required. D. Pipe Protection: Provide protection against abrasion where tubing/fitting is in contact with other building
materials (including burial) by wrapping with an approved tape, pipe insulation or otherwise suitable method of isolation.
E. Hydronic Heating: Glycol mixture for hydronic heating application is acceptable up to and including 100%. F. Behind the wall installation: Pressure test system for no less than 24 hours to ensure no leakage. G. Removal and reuse of push-fit fitting is allowed when executed in accordance with manufacturer’s
installation instructions. 3.4 FIELD QUALITY CONTROL
A. Water Testing: The copper tubing system shall be water tested for joint tightness. The piping system shall be filled with water. The system shall be pressurized to the maximum pressure and length of time required by the code or standard. The system shall have no leaks at the rated pressure.
8/6/2014
7
THE SHARKBITE DESIGN (1/4” – 1”)
The SharkBite Fitting incorporates a number of unique and patented features.
WHY SHARKBITE?
Instant push-fit connection for increased ease-of-use: o No soldering, clamps, unions, or glue required.
Fittings certified to 200 PSI and 200°F (93°C): o Proven durability and quality.
Fits copper tubing, and CTS CPVC and PEX: o Connects all three types in any combination.
Integral tube liner for PEX installations: o Integrated design means no loose components, ensures secure, reliable connection.
Design certified and agency listed: o Inspector friendly, peace of mind!
Compact, robust DZR brass body: o Foundation of a strong, corrosion resistant, durable fitting.
Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution:
o Quality engineered and manufactured.
Approved to be used underground and behind walls without access panels. o Designed for hydronic heating as well as potable water distribution.
8
CONNECTING A SHARKBITE FITTING
1. Cut the desired length of pipe.
Make sure cuts are square and even.
2. Deburr the end of the pipe to remove any
sharp edges.
This will ensure that the o-ring will not
be damaged upon insertion of the pipe.
3. Using a depth gauge, mark the pipe.
A 1” mark on the pipe can be used as a
guideline. Proper insertion depths are
listed below.
This will let you know if your
connection is successful.
Pipe Size Insertion Depth
1/4” 0.813” 3/8” 0.875”
1/2” 0.938”
5/8” 1.125”
3/4” 1.125”
1” 1.313”
4. Push the pipe into the fitting.
The mark you made on the pipe should
rest against the edge of the fitting.
8/6/2014
9
DISCONNECTING A FITTING
With the Disconnect Clip
1. Place the SharkBite disconnect clip around the tube with the non-branded side against the release collar.
2. Push the clip against the release collar and
pull the tube with a twisting action to release the tube.
With Disconnect Tongs
1. Place the teeth around the fitting assembly.
The fork end with the SharkBite brand logo
should be positioned around the tube and the
other end around the neck of the fitting.
2. Squeeze the tool with one hand and pull the
tube with a twisting action with the other hand to release the tube.
Check the fitting and tube end for damage. The fitting and tubing should be free of damage,
foreign objects and marks on the outside diameter. If the tubing is damaged or marked,
then cut and use a new section of tubing.
8/6/2014
10
SHARKBITE SLIP PRODUCTS
Slip fittings simplify repair by doing the job that two couplings and extra pipe would do. Only one end of the
coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released
with a disconnect tool and slid back onto the other end of the pipe for successful leak repair.
Cut out the section of the pipe needing repair (no
more than 2” in length).
Using the SharkBite Deburring & Depth Gauge, clean
the edges of the copper pipe. Use the gauge to mark
the proper insertion depth on the pipe.
On the side of the fitting marked “SLIP END,” slide
the copper pipe into the fitting until it bottoms out.
Place the SharkBite Disconnect Clip on the copper
pipe, on the same side as the “SLIP END.” As you are
pressing the clip to release the fitting, slide the
SharkBite fitting to meet the other copper pipe.
Continue to slide the fitting until the non-slip end
bottoms out. Ensure the fitting lines up with the
mark you made. Also ensure the Slip End of the
fitting has not proceeded past the depth mark you
originally made.
8/6/2014
11
SHARKBITE SLIP PRODUCTS
In addition to slip coupling and tees, we also have slip ball valves and slip pressure regulators available to ease
installation woes.
To see an installation video on installing a slip fitting, please visit:
http://www.youtube.com/watch?v=lgdBv5BK5dQ&list=PL0ABAD0AF076CFA60&feature=c4-overview-vl
SHARKBITE FOR CONCEALED AREAS
SharkBite fittings can be utilized in underground applications and as manufactured joints without access panels, per IAPMO Certificate of Listing File No. 4630. If burying SharkBite, it is recommended: Fitting should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion. It is also recommended to pressure test the system for 24 hours before closing up any inaccessible location.
8/6/2014
12
DIMENSIONS
8/6/2014
13
PRESSURE LOSS AND FLOW RATES
8/6/2014
14
8/6/2014
15 8/6/2014
16
ASSE 1061 TESTING
Below are some of the testing that SharkBite fittings
Hydrostatic Burst:
Fittings and pipe assembled and raised to min burst pressures at temperatures below:
PEX
Nominal Tubing Size in.
PSI @ 73.4 ˚F PSI @ 180 ˚F
1/4 PEX 752 336
1/2 PEX 480 215
5/8 and larger PEX 475 210
Hydrostatic Sustained Pressure:
Fittings and pipe assembled and raised to min burst pressures at temperatures below:
PEX
Nominal Tubing Size in.
PSI @ 180 ˚F Duration
1/4 PEX 305 1000 h
1/2 PEX 195 1000 h
5/8 and larger PEX 190 1000 h
CPVC
Nominal Tubing Size PSI @ 180 ˚F Duration
All 521 6 m
All 364 4 h
Copper
Nominal Tubing Size PSI @ 200 ˚F Duration
All 400 1000 h
8/6/2014
17
Thermo-Cycling:
Fittings and pipe assembled and immersed into varying temperatures. A constant air pressure of 100 psi will
be applied to the assembly cycling between water reservoirs and ambient air 1000 times as listed below:
Copper, PEX, CPVC
Nominal Tubing Size Condition Temperatures
Duration
All
Water immersion at 180°F
2 m
Air immersion at ambient
2 m
Water immersion at 60°F
2 m
Air immersion at ambient
2 m
Mechanical Separation:
Fittings and pipe assembled with longitudinal weight below:
Copper, PEX, CPVC
Nominal Tubing Size Longitudinal Load Lbf Duration
3/8 80 1 hr
1/2 120 1 hr
3/4 215 1 hr
1 375 1 hr
1-1/4 550 1 hr
1-1/2 785 1 hr
2 1320 1 hr
Hydraulic Shock:
Fitting and pipe assembled subject to water hammer every two seconds as below:
Copper, PEX, CPVC
Nominal Tubing Size Hydraulic Shock Pressure PSI
Cycles
All 375 1000
8/6/2014
18
THE SHARKBITE 2XL DESIGN (1-1/4” – 2”)
316 Stainless Steel Grab Ring
Lead Free DZR Body Nylon Disconnecting
Ring
EPDM O Ring
PPSU Locking Ring
SharkBite Logo
8/7/2014
19
WHY SHARKBITE 2XL?
Quick Connect: o No tools, soldering, clamps, unions or glue required. Cut pipe square, de-burr to remove rough
edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time.
Quick Disconnect: o Disconnect in seconds by sliding the De-Mount Tool down the pipe to engage the demount lugs and
rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe.
SAFE-Recessed Release Collar: o Commercial SharkBite require a special Demount Tool and cannot be accidentally
disconnected/released.
Extensive Range Including Slip Feature on Couplings and Tee’s: o When repairing or tapping into existing pipe with “Push-Fittings” you must be able to either move the
fitting or the pipe to ensure the pipe is engaged fully into the fitting. With rigid pipe like copper the only way with “Push-Fittings” is to have a SLIP feature to allow easy installation when tapping into existing pipe.
Easy Installation: o Unlike the tool intensive connection methods there is NO need to send multiple fitters to a job,
SharkBite 2XL has been designed to be installed or removed by one person. All fittings are lubricated for easy connection and by fitting the De-Mount Tool before engaging the pipe the force required can be reduced further. With the De-Mount Tool locked on you also have hands free disconnection. WET OR DRY: No waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds.
No Tools: o Unlike alterative tool intensive connections systems, SharkBite has no special tooling required for
installation.
No Time: o Fastest connection - CUT-PUSH-DONE.
o Easy access to small or tight places.
o No Flame - Does not require fire permit or fire marshal.
No Waste: o Should you make an error or simply want to change your installation, no problem for SharkBite. Simply
remove and re-use. (Fittings used for repeated testing must not be used in any permanent application).
Fittings Cannot be Disassembled: o SharkBite 2XL Fittings are factory assembled and components cannot be removed.
Long Pipe Engagement: o Provides pipe support against lateral pipe forces.
Lead Free (LF) Dezincifcation Resistance (DZR) Brass: o Exceeds current no lead legislation - AB1953 or NSF372. Suitable for underground installation subject to
local code authorites/inspectors. Dezincification properties (DZR) exceed ISO6509 and NSF-14.
Environmentally Friendly: o Remove and re-use fittings, no need to be scrapped. No heat is required for installation.
8/6/2014
20
HOW TO MAKE A SHARKBITE 2XL CONNECTION
1. Cut copper, CPVC or PEX using a quality tuber or pipe cutter with a sharp blade.
2. Remove burrs and ensure pipe surface is free
of scratches and any debris. It is critical that pipe be marked with the correct insertion depth as listed below:
1-1/4" Pipe Insertion Depth = 2"
1-1/2" Pipe Insertion Depth = 2-1/4"
2" Pipe Insertion Depth = 2-1/2"
3. Align pipe with the fitting, insert pipe while rotating either pipe or fitting.
4. SharkBite 2XL PEX Stiffener must be inserted into PEX pipe prior to fitting.
Connection is complete when pipe is fully inserted with depth insertion marked on pipe is still visible at the head of the fitting
8/6/2014
21
DISCONNECTING A SHARKBITE 2XL CONNECTION
1. Place the Shark Shifter De-Mount Tool on the pipe just above the connection. Then slide the tool down to engage lugs on the head of the fitting.
2. Rotate the Shark Shifter De-Mount Tool clockwise to lock onto the lugs. This will lock the Shark Shifter De-Mount Tool in place.
3. Rotate the Shark Shifter De-Mount Tool clockwise to lock onto the lugs. This will lock the Shark Shifter De-Mount Tool in place.
With the Shark Shifter De-Mount Tool Withdraw locked in place, pull the pipe from the fitting. Rotate the Shark Shifter De-Mount Tool counter-clockwise to remove the fitting.
8/6/2014
22
SHARKBITE 2XL DIMENSIONS
8/6/2014
23
SHARKBITE 2XL PRESSURE LOSS AND FLOW RATES
8/6/2014
24
8/6/2014
25 8/6/2014
26
SHARKBITE PEX TUBING
SharkBite PEX tubing is a cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red) and with an oxygen barrier for radiant floor and hydronic heating applications (available in orange). The oxygen diffusion barrier applied to the exterior limits oxygen permeation through the tubing wall in hydronic heating applications which prevents corrosion of ferrous metal parts in the heating system.
FEATURES AND BENEFITS
Flexible: Easy to install and service.
Quieter: Minimizes noise caused by water hammer.
Resists corrosion and scale buildup: Improves the performance of the plumbing system.
Fewer fittings required: Reduces total installation cost.
Fewer joints: Reduces the chances of call backs.
Pressure test immediately: No waiting for glue to dry or joints to cool
A repeating SharkBite imprint pattern provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-Fit Fitting. This feature only works if the tubing is cut between the SharkBite imprint pattern.
CERTIFICATIONS The SharkBite tubing with and without oxygen barrier is approved for use in all model codes in the US and Canada for use in hydronic and potable water systems and is certified to the following standards:
NSF 14/61,
NSF P171,
ASTM F 876,
ASTM F 877,
CSA B137.5
AWWA C904.
8/6/2014
27
PEX PIPE SPECS AND DIMENSIONS
Model
Nominal Tubing Size Length Bend Radius Fluid Capacity Per 100’ Package Weight
ID OD FT M in mm gal ltrs lbs kgs
in mm in mm
Blue PEX (Coil)
U860B100 1/2 13 5/8 16 100 30.48 5 127 0.96 3.63 5.5 2.5
U860B300 1/2 13 5/8 16 300 91.44 5 127 0.96 3.63 14.5 6.6
U860B500 1/2 13 5/8 16 500 152.4 5 127 0.96 3.63 24 10.9
U870B100 3/4 19 7/8 22 100 30.48 7 178 1.9 7.19 10.5 4.8
U870B300 3/4 19 7/8 22 300 91.44 7 178 1.9 7.19 31.5 14.4
U870B500 3/4 19 7/8 22 500 152.4 7 178 1.9 7.19 45 20.4
U880B100 1 25 1-1/8 29 100 30.48 10 254 3.1 11.73 18 8.2
U880B300 1 25 1-1/8 29 300 91.44 10 254 3.1 11.73 54 24.6
U880B500 1 25 1-1/8 29 500 152.4 10 254 3.1 11.73 90 40.8
Red PEX (Coil)
U860R100 1/2 13 5/8 16 100 30.48 5 127 0.96 3.63 5.5 2.5
U860R300 1/2 13 5/8 16 300 91.44 5 127 0.96 3.63 14.5 6.6
U860R500 1/2 13 5/8 16 500 152.4 5 127 0.96 3.63 24 10.9
U870R100 3/4 19 7/8 22 100 30.48 7 178 1.9 7.19 10.5 4.8
U870R300 3/4 19 7/8 22 300 91.44 7 178 1.9 7.19 31.5 14.4
U870R500 3/4 19 7/8 22 500 152.4 7 178 1.9 7.19 45 20.4
U880R100 1 25 1-1/8 29 100 30.48 10 254 3.1 11.73 18 8.2
U880R300 1 25 1-1/8 29 300 91.44 10 254 3.1 11.73 54 24.6
U880R500 1 25 1-1/8 29 500 152.4 10 254 3.1 11.73 90 40.8
White PEX (Coil)
U860W100 1/2 13 5/8 16 100 30.48 5 127 0.96 3.63 5.5 2.5
U860W300 1/2 13 5/8 16 300 91.44 5 127 0.96 3.63 14.5 6.6
U860W500 1/2 13 5/8 16 500 152.4 5 127 0.96 3.63 24 10.9
U870W100 3/4 19 7/8 22 100 30.48 7 178 1.9 7.19 10.5 4.8
U870W300 3/4 19 7/8 22 300 91.44 7 178 1.9 7.19 31.5 14.4
U870W500 3/4 19 7/8 22 500 152.4 7 178 1.9 7.19 45 20.4
U880W100 1 25 1-1/8 29 100 30.48 10 254 3.1 11.73 18 8.2
8/6/2014
28
Model
Nominal Tubing Size Length Bend Radius Fluid Capacity Per 100’ Package Weight
ID OD FT M in mm gal ltrs lbs kgs
in mm in mm
White PEX (Coil)
U880W300 1 25 1-1/8 29 300 91.44 10 254 3.1 11.73 54 24.6
U880W500 1 25 1-1/8 29 500 152.4 10 254 3.1 11.73 90 40.8
U885W100 1-1/4 31.75 1-3/8 35 100 30.48 7 175 4.67 17.68 25 11.34
U890W100 1-1/2 38.1 1-5/8 41 100 30.48 8 206 6.5 24.61 35 15.88
U895W100 2 50.8 2-1/4 54 100 30.48 11 270 11.4 43.15 60 27.22
Blue PEX (Straight Lengths)
U860B5 1/2 13 5/8 16 5 1.52 5 127 0.96 3.63 3 1.4
U860B10 1/2 13 5/8 16 10 3.04 5 127 0.96 3.63 6 2.7
U860B20 1/2 13 5/8 16 20 6.09 5 127 0.96 3.63 12 5.5
U870B5 3/4 19 7/8 22 5 1.52 7 178 1.9 7.19 5.25 2.5
U870B10 3/4 19 7/8 22 10 3.04 7 178 1.9 7.19 10.5 4.8
U870B20 3/4 19 7/8 22 20 6.09 7 178 1.9 7.19 21 9.5
U880B5 1 25 1-1/8 29 5 1.52 10 254 3.1 11.73 4.5 2
U880B10 1 25 1-1/8 29 10 3.04 10 254 3.1 11.73 8.8 4
U880B20 1 25 1-1/8 29 20 6.09 10 254 3.1 11.73 17.4 7.9
Red PEX (Straight Lengths)
U860R5 1/2 13 5/8 16 5 1.52 5 127 0.96 3.63 3 1.4
U860R10 1/2 13 5/8 16 10 3.04 5 127 0.96 3.63 6 2.7
U860R20 1/2 13 5/8 16 20 6.09 5 127 0.96 3.63 12 5.5
U870R5 3/4 19 7/8 22 5 1.52 7 178 1.9 7.19 5.25 2.5
U870R10 3/4 19 7/8 22 10 3.04 7 178 1.9 7.19 10.5 4.8
U870R20 3/4 19 7/8 22 20 6.09 7 178 1.9 7.19 21 9.5
U880R5 1 25 1-1/8 29 5 1.52 10 254 3.1 11.73 4.5 2
U880R10 1 25 1-1/8 29 10 3.04 10 254 3.1 11.73 8.8 4
U880R20 1" 25 1-1/8 29 20 6.09 10 254 3.1 11.73 17.4 7.9
White PEX (Straight Lengths)
U860W10 1/2 13 5/8 16 10 3.04 5 127 0.96 3.63 6 2.7
U860W20 1/2 13 5/8 16 20 6.09 5 127 0.96 3.63 12 5.5
U870W5 3/4 19 7/8 22 5 1.52 7 178 1.9 7.19 5.25 2.5
U870W10 3/4 19 7/8 22 10 3.04 7 178 1.9 7.19 10.5 4.8
U870W20 3/4 19 7/8 22 20 6.09 7 178 1.9 7.19 21 9.5
U880W5 1 25 1-1/8 29 5 1.52 10 254 3.1 11.73 4.5 2
U880W10 1 25 1-1/8 29 10 3.04 10 254 3.1 11.73 8.8 4
U880W20 1 25 1-1/8 29 20 6.09 10 254 3.1 11.73 17.4 7.9
U885W20 1-1/4 31.75 1-3/8 35 20 6.10 7 175 4.76 7.68 25 11.34
U890W20 1-1/2 38.1 1-5/8 41 20 6.10 8 206 6.5 24.61 35 15.88
U895W20 2 50.8 2-1/4 54 20 6.10 11 270 11.4 43.15 36 16.33
8/6/2014
29
PROJECT PROFILE
Soleil Skyscraper
Location: Brisbane, Australia
Height: 797 FT
# of Floors: 74
Architect: DBI Design
Developer: Meriton Group
Main Contractor: Karimbla Building Services (Meriton Subsidiary)
Plumbing Contractor: Isle Plumbing
Product Used: SharkBite Pipes and Fittings
8/7/2014
8/7/2014
30
PROJECT PROFILE
Infinity Tower
Location: Brisbane, Australia
Height: 817 FT
# of Floors: 81
Developer: Meriton Group
Main Contractor: Meriton Group
Plumbing Contractor: Isle Plumbing
Product Used: SharkBite Pipes and Fittings
8/7/2014
31
IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 •
www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
Effective Date: July 2015 -Rev. 10/2/2015- Void After: July 2016
Product: Push Fit Fittings File No. 4630
Issued To: Cash Acme/Reliance Worldwide
2400 7TH AVE. SW
CULLMAN, AL 35055
Identification: Each fitting shall have the following information marked on it where it will
be visible after it has been installed:
Name of manufacturer or trademark.
When a fitting is not suitable for all four (4) materials, it shall be marked
as follows for the materials for which they are suitable:
- Copper or Cu
- CPVC
- PEX
- PE-RT
When push-fit connectors are used on plumbing devices, the markings are
permitted to be on the plumbing device.
Fittings 1/2" CTS or smaller are permitted to use a permanent label complying
with the requirements of UL 969 or CSA C22.2 N. 0.15 to display the required
markings. The markings shall be permanent. The product shall also bear the
cUPC mark.
Characteristics:
Push fit fittings that have a quick assembly push fit mechanism that can be
used with Copper, PEX and CPVC tubing and pipes. Fittings for use in domestic
and commercial application for both potable water distribution systems and
hydronic heating systems. Push fit fittings can be utilized in underground
applications and as manufactured joints without access panels. To be installed
in accordance with the manufacturer's instructions and the latest edition of
the Uniform Plumbing Code and the National Plumbing Code of Canada.
10/9/2015
32
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
International Plumbing Code (IPC®)
Products are in compliance with the following standard(s):
ASSE 1061-2011
MODELS: Note: The requirements of Section 609.3.2 in the Uniform Plumbing Code are satisfied for push fit
fittings by section 301.4.1 of the same Uniform Plumbing Code when installed in accordance with the
manufacturer's installation guides. Note: All 1/2" through 1" models comply with ANSI/NSF 14.
For a complete list of compliant models and the most up to date listing, please visit
http://pld.iapmo.org/file_info.asp?file_no=0004630
10/9/2015
33
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
Effective Date: October 2015 Void After: October
2016
Product: Lead Free Plumbing Products File No. 6544
Issued To: CASH ACME/RELIANCE WORLDWIDE
2400 7TH AVE. SW
CULLMAN, AL 35055
Identification: Each product shall bear permanent and legible markings to identify the
manufacturer. This marking shall be the trade name, trademark, or other mark known
to identify the manufacturer. The product and/or product packaging may also bear
the term "Lead Plumbing Law", "Complies with Lead Plumbing Law", or either "Lead
Free" or "Low Lead" above or in close proximity to the appropriate IAPMO R&T
certification mark, or the term "Certified by IAPMO R&T". The product packaging
may also bear a grey dot, a check mark with circle, or any other home centers
marking requirements.
Characteristics: Products may include any pipe, pipe fitting, solder, flux, or other plumbing
products providing water for human consumption. Products listed below are to be
installed in accordance with the manufacturer's instruction. These products have
been verified with weighted average lead content <=0.25%; Solder and flux lead
content <=0.2%.
Products listed on this certificate have been tested by an IAPMO R&T recognized
laboratory. This recognition has been granted based upon the laboratory's
compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following standard(s):
Section 1417(d) of the Safe Drinking Water Act
The lead content requirements of Section 116875 of the California Health & Safety
Code
NSF/ANSI 372-2011
For a complete list of compliant models and the most up to date listing, please visit
http://pld.iapmo.org/file_info.asp?file_no=0006544
10/9/2015
34
IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
Effective Date: December 2014 -Rev. 9/22/2015- Void After: December 2015
Product: Drinking Water System Components - Health Effects File No. N-4630
Issued To: Cash Acme/Reliance Worldwide
2400 7TH AVE. SW
CULLMAN, AL 35055
Identification: Each product shall be permanently and legibly marked with the manufacturer's name
or trademark. The product may also be marked with the standard designation
"NSF/ANSI 61".
Characteristics: Materials or products that come into contact with drinking water and/or drinking
water treatment chemicals. Products and materials may include process media,
protective materials, joining and sealing materials, pipes and related products,
mechanical devices used with treatment/transmission/distribution systems, and
mechanical plumbing devices. To be installed in accordance with the
manufacturer's instruction. Lead free requirements are addressed under a separate
certificate of listing.
Products listed on this certificate have been tested by an IAPMO R&T recognized
laboratory. This recognition has been granted based upon the laboratory's
compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following standard(s):
NSF/ANSI 61-2013
For a complete list of compliant models and the most up to date listing, please visit
http://pld.iapmo.org/file_info.asp?file_no=N4630
10/9/2015
35
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
Effective Date: December 2014 -Rev. 10/7/2015- Void After: December 2015
Product: Crosslinked Polyethylene (PEX) Tubing File No. 9143
Issued To: CASH ACME/RELIANCE WORLDWIDE
2400 7TH AVE. SW
CULLMAN, AL 35055
Identification: The tubing shall be marked with the manufacturer's name or trademark, ASTM
F876, PEX, pressure rating at 180°F, nominal size, SDR 9, and a code number
identifying the compound and the date of manufacture. The tubing intended
for use in potable water shall be marked with the seal or mark of the
laboratory marking the evaluation. Marking shall be spaced at intervals of
not more than 5 feet. Tubing shall be marked with the cUPC® certification
mark.
Characteristics: Crosslinked polyethylene (PEX) tubing that is outside diameter controlled,
made in standard thermoplastic tubing dimension ratios (SDR 9), and pressure
rated for water at three temperature. 630 psi (4.34 MPa at 73.4°F (23°C) 400
psi (2.76 MPa at 180°F (82.2°C) 315 psi (2.17 MPa at 200°F (93.3°C). May be
used in radiant floor and baseboard heating applications. To be installed in
accordance with the manufacturer's instructions and the requirements of the
latest edition of the Uniform Plumbing Code® and the National Plumbing Code
of Canada.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
Products are in compliance with the following standard(s):
ASTM F876-2013a and CSA B137.5-2013
For a complete list of compliant models and the most up to date listing, please visit
http://pld.iapmo.org/file_info.asp?file_no=0007143
10/9/2015
36
WARRANTY
LIMITED WARRANTY
SharkBite® And Cash Acme® Products
WHAT DOES THIS WARRANTY COVER?
Subject to conditions outlined in this statement, RWC (in the USA, Reliance
Worldwide Corporation and in Canada, Reliance Worldwide Corporation
(Canada) Inc.) warrants to owners of real property in the United States and
Canada that SharkBite® and Cash Acme® products, when used and installed
in accordance with the requirements set forth below, to be free from defects in
material and workmanship for the applicable Warranty Period. This Limited
Warranty is in effect for installations made after July 1, 2015 and is applicable to
product installed in the country it was purchased.
Proof of purchase is required to validate the warranty period; if proof of
purchase is not available, the warranty period shall default to the date of
manufacture for each product.
WHAT ARE THE CONDITIONS OF THIS WARRANTY?
1. All products must be installed in accordance with all then applicable
codes, good plumbing practice, in accordance with any local, state,
provincial or federal requirements, and installed in a potable water or
radiant heating application unless a non-potable water service is
specifically allowed for in the pertinent product literature.
2. The installing contractor must use construction techniques compliant with
then applicable codes to install the range of products and use the
product(s) within the design parameters specified in any installation
guidelines and technical notes for the applicable system. This shall include
field pressure testing prior to concealing with concrete or by other means.
Failure to install RWC products according to manufacturer’s installation
instruction will void all applicable warranties and may result in severe
water damage. Installation of RWC’s SharkBite® EvoPEX Evolutionary
PEX Push Fittings must be completed by a licensed plumbing contractor.
3. Products must not be installed in a system that may operate at
temperatures or at pressures that exceed the printed rating on the
product, packaging or installation instructions.
4. Without limiting the foregoing, this Limited Warranty does not apply if
the product failure or resulting damage is caused by: (a) evidence of
tampering, mishandling, neglect, accidental damage, freeze damage (it
is expressly understood that failure as a result of any freezing fluids
within the pipes does not constitute a defect in material or workmanship
and shall not be covered by this warranty) or unauthorized modifications
or repairs that cause damage to RWC warranted products; (b) exposure
to harmful, unauthorized, or unanticipated chemicals or substances or
corrosive water conditions; (c) exposure to ultraviolet light; (d) faulty
installation including failure to follow proper burial instructions;
(e) damage from faulty operating conditions; (f) components not
manufactured or sold by RWC; and (g) acts of nature such as
earthquakes, fire, flood or lightning.
5. Although RWC provides a plumbing system to facilitate a complete
installation, other manufacturers pipe and/or fittings may be installed in any
given installation provided manufacturing of the pipe and/or fittings
demonstrates compliance with the applicable ASTM/CSA standards, and
the product has been certified by a recognized third-party testing agency.
The RWC product in the given installation will continue to be covered
under this Limited Warranty although limits on Warranty Period may apply.
RWC will be responsible only for proven defects in material or
workmanship in RWC products. Problems in products manufactured by
another company should be reported to that manufacturer. RWC does not
warrant the integrity or workmanship of the contractor/installer.
HOW DO YOU GET SERVICE?
In order to be eligible for service under this Limited Warranty you must
return the defective product within thirty (30) days after detection of
alleged failure or defect occurring within applicable warranty period (with
shipping charges prepaid) to the original place of purchase. You also
must include the model number of the product, the original date of
purchase, proof of purchase and the nature of the problem. Products
returned without shipping charges prepaid will be refused. For questions
or inquiries to the Manufacturer, in the U.S. call 1-877- 700-4242 and in
Canada 1-888-820-0120.
WHAT WILL RWC DO?
If, after inspection, we find that a product covered by this limited warranty
has failed due to a defect in material or workmanship during the
specified warranty period, we will repair or replace, at our sole option,
free of charge, the defective product during normal working hours and
through a place of business as determined by RWC. This shall constitute
the sole and exclusive remedy for any defective product.
WHAT DOES THIS LIMITED WARRANTY NOT COVER?
RWC shall not be responsible for any incidental, indirect, contingent,
special or consequential damages, including without limitation, lost
profits or the cost of repairing or replacing other property which is
damaged if these warranted products do not work properly, other costs
resulting from labor charges, delays, vandalism, negligence, fouling
caused by foreign material, damage from adverse water conditions,
adverse chemical environments, or any other circumstances over
which RWC has no control. This limitation applies even if RWC could
have foreseen or has been advised of the possibility of these damages.
This Limited Warranty shall be invalidated by any abuse, misuse,
misapplication or improper installation of the product.
HOW DOES STATE/PROVINCIAL LAW APPLY?
Some States/Provinces do not allow limitations on how long an implied
warranty lasts, and some States/Provinces do not allow the exclusion or
limitation of incidental or consequential damages. Therefore, the above
limitations may not apply to you. This Limited Warranty gives you the
specific legal rights, and you may have other rights that vary from
State/Province to State/Province. You should consult applicable
State/Provincial laws to determine your rights.
SO FAR AS IS CONSISTENT WITH APPLICABLE STATE/PROVINCIAL/ FEDERAL LAW, THE EXPRESS WARRANTY SET FORTH HEREIN IS THE ONLY WARRANTY GIVEN BY RWC WITH RESPECT TO THE
SHARKBITE® AND CASH ACME® PRODUCTS AND RWC MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
10/9/2015
37
HOW LONG DOES THE LIMITED WARRANTY COVERAGE LAST?
CATEGORY
SUBCATEGORY
WARRANTY PERIOD
(FROM COMMENCEMENT DATE)
COMMENTS
SharkBite Universal Brass
Push-To-Connect Fittings
And SharkBite 2XL Large
Diameter Push-To-Connect
Fittings
Fittings
Twenty-Five (25) Years
Shall be used with: Copper–ASTM B 88 hard drawn copper tube K, L, and M PEX–ASTM F876/CSA B137.5 CPVC–ASTM D2846 or CSA B137.6 PE-RT–ASTM F2769
Fittings
Five (5) Years
Shall be used with: HDPE SDR-9 ASTM D2737
SharkBite PEX Pipe
–
Twenty-Five (25) Years
Shall be used with: ASSE 1061,ASTM F1807, ASTM F2098, and ASTM F2159 Fittings
SharkBite Barb Fittings
Brass PEX Barb Fittings/ Copper Manifold
Five (5) Years
Shall be used on: PEX – ASTM F876/CSA B137.5 Copper Crimp Rings – ASTM F1807 Stainless Steel Clamp Rings – ASTM F2098
Poly PEX Barb Fittings
Five (5) Years Shall be used on: PEX – ASTM F876/CSA B137.5 Copper Crimp Rings – ASTM F2159 Stainless Steel Clamp Rings – ASTM F2098
PEX Barb Tools
One (1) Year
From date of purchase.
Cash Acme® Products
Thermostatic Mixing
Valves
Five (5) Years
Shall be installed per installation instructions.
Other Cash Acme®
Two (2) Years
Shall be installed per installation instructions.
Valves with SharkBite Push-
To-Connect Connections
Ball Valves, Supply Hoses, Supply Stops
Two (2) Years
Shall be installed per installation instructions.
Valves with
SharkBite Push-To-
Connect Connections
Continued
Thermostatic Mixing Valves
Five (5) Years
Shall be installed per installation instructions.
Other Cash Acme®
Two (2) Years
Shall be installed per installation instructions.
SharkBite Connection
Twenty-Five (25) Years
Shall be used with: Copper - ASTM B 88 HARD DRAWN Copper Tube Type K, L, AND M PEX – ASTM F876/CSA B137.5 CPVC - ASTM D 2846 OR CSA B137.6 PE-RT - ASTM F2769
SharkBite Connection
Five (5) Years
Shall be used with: HDPE SDR-9 ASTM D2737
10/9/2015
10/9/2015