t802 gps tracker
TRANSCRIPT
3.1 Computer platform
Tracking Link:
Notes: If need account to manage your team,please contact your supplier to get.
User name: ID/IMEI number Default password 123456
*Please change the password after you login in.
www.aoyagps.net
3.Tracking Platform
1.2. Accessories
NO.
1
2
3
Name
T802
User Manual
Charging Cable
Quantity
1
1
1
MaintenanceThere are no maintenance spares in the terminal, please do not disassemble it when you are
non-professionals. Any malfunctions, please send T802 to our company or to repair station.
!Please power off in the place where the wireless transmitters are
not allowed to use.
Please don't put the into fire or water to avoid explosion and
environmental pollution.
Please keep the dry.
Please send the to the recycle bin when the lithium battery is scrap.
T802
T802
T802
T802
Notices (important)èOnly the call/SMS function of the SIM card is enabled can the achieve Call/SMS
alarm function. For more details about the information of SIM card, please consult the
specific network operators.
èTo achieve all the functions, you need to set guardian number before using, or the
can only communicate with the web platform.
èPlease do not make near the transmitters, such as car DVR, interphone, or other
communication devices.
èChanging circuits to the vehicle or other controlled device must be operated by
professionals. Our company is irresponsible for the damage of due to the wrong
operation.
T802
T802
T802
T802
Basic Definitions¦WEB Platform: You can connect the terminal with the online platform to transfer data.
¦BDS: BeiDou Navigation Satellite System
¦GPS/A-GPS: Global Positioning System/ Assisted Global Positioning System
¦LNA: Low Noise Amplifier
¦SNR: Signal-Noise Ratio
¦G-Sensor: Gravity- Sensor
¦CDN: Content Delivery Network
¦SMS: Short Message
2.Quick installation2.1 SIM card insertion
3.2 Tracking by Android/IOS APP
Scan the QR code to download Android/IOS APP,or search in the app store.
Login name: ID/IMEI number Password: 123456
AoyaStar
2.3 Observe the signal indicator and make sure the GSM and BDS/GPS are working normally.
Status of Signal Indicator
The power is working
The power is cutoff
Always lighted: searching for GSM network
Flash once in every 3 seconds: the network is normal.
Flash twice, in every 3 seconds: the network is normal.
Flash twice, light for 3 seconds: searching for GSM network.
Long lighted: Searching for GPS signal.
Flash slowly: BDS/GPS is positioning.
Always Off : The T802 is sleeping.
GSM
Indicator
(Blue)
GPS
Indicator
(Green)
3.4 Change the password
�Web platform : Click in the upper right corner.
�APP : Click in the upper left corner.
3.5
�
�APP : Click Location can check current location.
BDS/GPS/LBS/AGPS Multi-Mode Positioning
Web platform : Click can check the current location.
User Manual v1.0
T802 GPS Tracker
Scan to download APP
Choose the map display, 3D stereoscopic, satellite and floor plan.
History route
Geo-fence list
Add a new fence
Tracking navigation
Show current phone location.
Show current tracker location.
Select whether to show traffic.
Web platfom:www.aoyagps.net or search “Aoyastar”in app store.
3.6 Remote voice monitor (requires SIM card have calling feature)This function requires setting the guardian number on the phone APP / PC side and
opening the monitor function at the same time. Dialing to the device phone number by the
guardian number, and the device will answer the call automatically.
Note: Set the guardian number steps please see [3.3 ]Setting the guardian number
3.3 Setting the authorized/guardian number
Before using the device , you have to set a authorized number first,The number can be use to
receive different alarm message , and also can send SMS command to set the device.
Note:All SMS command will valid only sending by authorized number.
� Web platform : Click "settings"to set the authorized/guardian number.
�APP : Click details to edit the authorized/guardian number.
�Web platform: Click "Settings", turn on "Set Voice Monitor Switch" .
Unplug the device cover, insert the SIM card correctly into the slot.
THE SIM CARD MUST SUPPORT GSM NETWORK WITH GPRS
3.7 History route playback
�Web platform : click "play history"can check the history route.
3
8
13
2
4
12
7
1
4
11
64
10
5
4
9
14
1. Introduction1.1 View of T802
T802 is a powerful and stable performance of the BDS/ GPS rechargeable magnetic intelligent tracker,
with real-time precision positioning, history route playback, portable without wire cut installation,built-
in big rechargeablebattery with different working mode can provide a quite long life battery.
T802 is especially for personal asset tracking, different vehicles management and for
personal use real time spy tracking.
SIM card slot USB Charging Port
Light Sensor
T802 User manual Charging Cable
�APP:Click history can check the history route. 3.8 Geo-Fence Alarm (IN/OUT Area)
�Web platform : Click "fence"and select "new circle fence"or "new polygon fence",can
draw a invisible fence,when device out/in the fence,platform will show alarm.
�
device out/in the fence,platform will show alarm.
APP : Click "location"and select more functions -add new fence or select fast fence ,when
3.9 �Web platform : Click "Settings"can set the different alarm switch.
�Set over speed threshold : Free to set in any speed.
Multiple Alarming
Check the total alarms : Click in the upper right corner can check all notifications.
�
�Setting Over speed alarm : Click "config" - set speeding value-config
�Check alarms : Click "Notify" to view the relevant alarm information,as shown in Figure 6 below.
APP : Click "Manage" can set the different alarms switch.The "notify" shows the total alarms of the device , the product has a tamper / light / low
power / vibration / displacement / over speed alarm, etc., in the Web or APP to select the
appropriate alarm to remind the switch.
(1) Low power alarm: When the internal battery voltage is lower than 3.6V, will
automatically send an alarm to the platform.
(2) Tamper alarm: When the equipment tamper switch is detected to be removed, it will
automatically send an alarm to the platform.
(3) Light alarm: equipment installed in the dark, when the device in the photoresistor to
detect the light, it will automatically send an alarm to the platform.
(4) Displacement and vibration alarm: When the device senses that the vehicle is
abnormally vibrated or is illegally moved, it will automatically send an alarm to the
platform.
(5) Over speed alarm: speed alarm to set the speed threshold, when the device speed
exceeds the threshold, it will automatically send an alarm to the platform. The default
speed threshold is 120km / h, and 0 indicates the overspeed alarm is off.
3.10 Set GPS uploading intervalThe GPS default uploading interval is 30 seconds,you can set the minimum to 10 seconds ,
and it will uploading more frequently and correspond will cost more battery and GPRS data.
�Web platform : Click "Settings”-Set GPS upload time interval.
� APP: Click "Manage"-"config"-Set GPS upload time interval.
4. ModesThe T802 can auto-change the working mode in different situations.
Tracking Mode
Device stopped
Sleeping Mode
Upload location data to platform
each 30 seconds.
Detect vibration
or movement
Start Moving
Device was stop
over 3 minutes
In this two mode,user can send
command via platform&APP or
SMS to the device.
GPS offline ,GPRS keep
connecting,Uploading a data to
platform every 3 minutes.
Supplement:
*Each time the device wakes up from a low-power mode, it will perform AGPS fast positioning.
If the network abnormality causes the AGPS to fail, it will try several times.
*If the satellite positioning fails, the device will upload base station location data to the server,
base station positioning accuracy is lower than the satellite positioning.
8. Trouble ShootingèT802 is offline?
Solutions: call T802, if it does not answer:
Please confirm that the power supply is connected, and the GSM indicator is lighted.
Please confirm that the SIM card is inserted correctly or its balance is enough.
If it answered, please confirm that the account you logged in is correct.
If it is still offline, please restart the T802.
èGPS positioning is not accurate?
Solution: Please confirm T802 is in outdoor environment, and GPS antenna is not blocked
by metal objects.
The positioning accuracy of GPS is about 10 meters. If the positioning is not so accurate,
the T802 may be in indoor place. If the GPS signal is weak, the Cell-ID positioning would
enable. The positioning accuracy about 10~30m of Cell-ID is usually worse than that of
GPS. You can enable or disable the Cell-ID positioning in the platform.
èCan not remotely listen?
Solutions:
Please confirm that the SIM card in the T802 has the voice call function.
Please confirm that the listening function of T802 is enabled.
èNot this IMEI or User Name?
Solution: Please contact with our service staff, they will add your account into the system.
9. Service and Warrantyè
è
è
è
m
m
m
m
You can return or change the product if the damage occur at performance within 7 days.
It is free to repair the product within a year if the damage are not manually.
Please show the Warranty Card and do not alter it when you want to get relation help. If not,
we reserved the right of no warranty.
We will provide the warranty service with no free in the following cases:
Damaged T802 by human factors.
Damaged by mis-wiring.
Damage caused by force majeure, such as Natural fire, lightning.
Mis-operation without reading this manual.
5. SMS Commands
Commands NameCommands Contents
Set guardian number sos,
xxxxxxxxxxx
Sending SMS to inquiry C
Parameters inquiring SR
CLOSE, N1Enable/disable SMS alarm
DH, N1Enable/disable calling
alarm
xxxxxxxxxxx---the guardian number
Note: if the guardian number is null, it is meant to clear the
guardian number
Sending SMS to inquiry the current position
Inquiry the parameters of T802
N1 means if the “SMS alarm” function is enabled or not
“N1=1” means disabled, “N1=0”means enabled
—
N1 means if the “call to alarm” function is enabled or not
“N1=1” means enabled, “N1=0”means disabled
—
Explanations
JGBJ,N1,N2,
N3Light detected alarm
1
2
3
4
5
6
NO
ZD,N1,N2,N3Vibration alarm
setting
Low-power
alarm settingDY,N1,N2,N3
10
DY set low-power alarm
N1 means if the “low-power alarm” function is enabled or not
“N1=1” means enabled, “N1=0” means disabled
N2 means if the SMS function of low-power alarm is enabled or not
“N2=1” means enabled, “N2=0” means disabled
N3— means if the Call function of low-power alarm is enabled or not
“N3=1” means enabled, “N3=0” means disabled
—
—
—
ZD---set vibration alarm
N1--- means if the “vibration alarm” function is enabled or not
“N1=1” means enabled, “N1=0” means disabled
N2--- means if the SMS function of vibration alarm is enabled or not
“N2=1” means enabled, “N2=0” means disabled
N3--- means if the Call function of vibration alarm is enabled or not
“N3=1” means enabled, “N3=0” means disabled
7
CSBJ--- set overspeed alarm
speed---the upper limit value of speed, with a range in 40-60km/h.
It also can be 0. “0”means the overspeed alarm is disabled
n1 means if the SMS function of overspeed alarm is enabled or not
“n1=1” means enabled, “n1=0” means disabled
n2 means if the Call function of overspeed alarm is enabled or not
“n2=1” means enabled, “n2=0” means disabled
—
—
CSBJ,speed,
n1,n2Overspeed alarm
setting
8
9
15
WLSMS,N1Geo-fence alarm
setting
WY,N1,N2,N3Displacement
alarm setting
N1 means if the “Geo-fence alarm” function is enabled or not
“N1=1” means enabled, “N1=0” means disabled.
—
WY set displacement alarm
N1 means if the “displacement alarm” function is enabled or not
“N1=1” means enabled, “N1=0” means disabled
N2 means if the SMS function of displacement alarm is enabled or not
“N2=1” means enabled, “N2=0” means disabled
N3— means if the Call function of displacement alarm is enabled or not
“N3=1” means enabled, “N3=0” means disabled
—
—
—
14
Note:
èN1/N2/N3 must be equal to 0 or 1.
èExcept setting the guardian number command, other commands can only be issued by
the guardian number.
èFor example:CSBJ,60,0,1 indicates that it will make an call alarm of overspeed when the
speed exceeds 60km/h; DY,1,1,0 indicates that it will make a SMS alarm of low power when
the T802’s power is low.
12
ITV--- set transmission time.
N1---the specified time value of transmission, with a range in
15-3600s.ITV,N1
GPS uploading
interval
Reset all settings to factory except the IP address and port
of server.CLEARReset to factory
Restart T802 RESET Restart the T802
11
19
24
16
18
23
28
16
21
26
17
22
1927
JGBJ --- light alarm setting N1 --- light alarm function is turned
on or off
Valid values are 0 or 1,0 for off, 1 for on
N2 --- light alarm corresponding to the SMS alarm notification
is turned on or off
Valid values are 0 or 1,0 for off, 1 for on
N3 --- light alarm corresponding to the telephone alarm
notification is turned on or off
Valid values are 0 or 1,0 for off, 1 for onAlarm status
inquiringALMSW Inquiry if the alarm is enabled or not
GPS sleeping
settingsleep,N1
Sleep---Set sleeping of GPS
N1---means if the “GPS sleeping” function is enabled or not
“N1=1” means enabled, “N1=0” means disabled
6.Default settings6.1 Basic parameters are set by default
Default item
guardian(SOS) number
Sleeping model switch
SMS Alerts switch
Call alarm switch
Vibration alarm sensitivity
Over speed alarm threshold
Uploading interval
Fortify function(vibration ,movement )
Status
Empty
On
Off
Off
Low
120km/h
30 seconds
Off
6.2 Separate alarm switch default setting
There are three kinds of alarm, telephone, platform three alarm methods, each alarm
supports one or more different alarm mode.
Note: To achieve the telephone / SMS alarm function to open the phone / SMS alarm switch
Alarms type
Low power
Anti remove
Light alarm
Geofence alarm
(Platform)switch
On
On
On
On
SMS switch
Off
Off
Off
Off
Call switch
Off
Off
Off
Off
NO.
1
2
3
4
15
20
25
7. ParametersItems
GSM frequency
BDS/GPS chip
GPRS
Sensitivity of BDS/GPS
BDS/GPS Accuracy
Cell ID Accuracy
Speed Accuracy
A-GPS Start-up
Fast Positioning
3D G-Sensor
Battery
Storage Temperature
Operating Temperature
Humidity
Operating Current
Sleeping Current
Dimensions
Net Weight
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Value
850MHz/900MHz/1800 MHz/1900 MHz
Compatible with u-blox/BDS
Class 12,TCP/IP build in GSM MODULE
-163dBm
10m (open sky)
50-2000m
0.1m/s
≤25s (open sky)
Supports AGPS
±8g(All Direction)
6000mAh/rechargeable
-40~+85゜C
-20~+70゜C
20%~80%RH
< 50mAh
< 3.5mA
62*120*25mm
223g
13
WARRANTY CARD
Name
Purchase Date
Contact
Address
Dealer's Stamp
Please send this warranty card to
M3 Asia Sdn Bhd
Lot 17.1, Level 17,Menara Lien Hoe,Persiaran Tropicana,47410,Petaling
Jaya,Selangor,Malaysia or email to support @m3asia.com.
Tel No.03-7886 2423 Web:www.m3asia.com