t e s t r e p o r t n o : ia16-29596a jan.18,2017 · t e s t r e p o r t n o : ia16-29596a...

T E S T R E P O R T N O : IA16-29596A Jan.18,2017

Page : 1 of 31

‘’ Please refer the website www.nabl-india.org to view our Scope (T-1526:Chemical & T-1527:Mechanical) of accredited tests’’. This report and / or certificate shall not be reproduced (except in full version) without the written approval of the UL Quality Assurance Private Limited. (“UL Quality Assurance Private Limited”). Letters and Reports of UL Quality Assurance Private Limited are issued for the exclusive use of the Customer to whom they are addressed. UL Quality Assurance Private Limited letters and reports apply only to the specific materials, products or processes tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Terms and conditions of service are in the last page of the report.

Applicant : WAAREE ENERGIES LTD Test Date : Dec.29,2016 - Jan.12,2017

Address : 231-236, SURAT SPECIAL ECONOMIC ZONE, DIAMOND PARK, SCHIN SURAT, GUJARAT-394230

Date in : Dec.29 2016

Modified Date: /

Contact Person : JIGNESH RATHOD Revised Date: Jan. 18, 2017

Sample Description: SOLAR PANEL (SAMPLE RECIVED IN GOOD CONDITION)

Color: MULTI-LAB IDENTIFIED

Sample Information :

Sample Product MULTI-LAB IDENTIFIED

001 Solar panel MULTI-LAB IDENTIFIED

001A Transparent glass with blue grey white coating (Cell) MULTI-LAB IDENTIFIED

001B Translucent plastic (EVA) MULTI-LAB IDENTIFIED

001C White plastic (Back sheet) MULTI-LAB IDENTIFIED

001D Translucent glass (Glass) MULTI-LAB IDENTIFIED

001E White resin (Sealant) MULTI-LAB IDENTIFIED

001F Silvery metal (Solar Ribbon) MULTI-LAB IDENTIFIED

001G Silvery metal (Solar Wire) MULTI-LAB IDENTIFIED

001H Silvery metal (Frame) MULTI-LAB IDENTIFIED

001I Silvery metal (Solar Bus Bar) MULTI-LAB IDENTIFIED

001J Black plastic (Junction Box Body) MULTI-LAB IDENTIFIED

001K Black plastic (Junction Box Joint) MULTI-LAB IDENTIFIED

001L Black plastic (Junction Box Outer Tube) MULTI-LAB IDENTIFIED

001M Black plastic (Junction Box Inner Tube) MULTI-LAB IDENTIFIED

001N Brown plastic (Junction Box Rubber Ring) MULTI-LAB IDENTIFIED

001O Silvery metal (Junction Box Metal Wire) MULTI-LAB IDENTIFIED

001P Silvery metal (Junction Box Metal Plate) MULTI-LAB IDENTIFIED

001Q Silvery metal (Junction Box Metal Bar) MULTI-LAB IDENTIFIED

001R Black ceramic (Junction Box Capacitor) MULTI-LAB IDENTIFIED


Page : 2 of 31


Test Sample ID

001

SUBSTANCES OF VERY HIGH CONCERN SCREENING TEST (SVHC) -169 SVHCS ♦ P

Note : P = Pass ; F = Fail ; NC = No Comment (See Result) ; NA = Not Applicable ; ** = test result(s) will be added later

Note:

♣ TEST(S) WAS (WERE) PERFORMED ACCORDING TO CLIENT PERFORMANCE STANDARDS.

♦ Marked test was subcontracted to an ISO 17025:2005 accredited laboratory.

Note: Report No.-IA16-29596A released Jan, 18, 2017 supersedes and must be used in place of the initial report no IA16-29596 released Jan. 12, 2017 as test result has been changed. FOR AND ON BEHALF OF UL QUALITY ASSURANCE PVT. LTD

SOUMYA RANJAN PANDA - VS TESTING SUPERVISOR


Page : 3 of 31


(01) 169 Substances of Very High Concern (SVHC) Screening Test

Acid digestion followed by ICP-AES analysis,

Solvent extraction followed by GC/MS, GC/ECD, and LC/MS/MS,

Headspace sampling followed by GC/MS

Sample ID: 001A+001D+01R

Substance Name CAS Number Concentration

(%)

Limit

(%)

Dibutyl phthalate (DBP) 84-74-2 < 0.01 0.1

Di-isobutyl phthalate (DIBP) 84-69-5 < 0.01 0.1

Benzyl Butyl phthalate (BBP) 85-68-7 < 0.01 0.1

Bis(2-ethylhexyl phthalate) (DEHP) 117-81-7 < 0.01 0.1

5-tert-butyl-2,4,6-trinitro-m

-xylene (Musk Xylene) 81-15-2 < 0.01 0.1

4,4-Diaminodiphenylmethane 101-77-9 < 0.01 0.1

Hexabromocyclododecane

(HBCDD) And all major diastereoisomers identified

(Α-HBCDD,Β-HBCDD,Γ-HBCDD)

25637-99-4 and

3194-55-6

(134237-51-7,

134237-50-6,

134237-52-8)

< 0.01 0.1

Alkanes, C10-13, chloro (Short Chain Chlorinated

Paraffins) 85535-84-8 < 0.01 0.1

Anthracene 120-12-7 < 0.01 0.1

Acrylamide 79-06-1 < 0.01 0.1

2,4-Dinitrotoluene 121-14-2 < 0.01 0.1

Tris(2-chloroethyl)phosphate 115-96-8 < 0.01 0.1

Anthracene oil 90640-80-5 < 0.01 0.1

Anthracene oil, anthracene paste, distillation lights 91995-17-4 < 0.01 0.1

Anthracene oil, anthracene paste, anthracene fraction

91995-15-2 < 0.01 0.1


Page : 4 of 31



(%)

Limit

(%)

Anthracene oil, anthracene-low 90640-82-7 < 0.01 0.1

Anthracene oil, anthracene paste 90640-81-6 < 0.01 0.1

Coal tar pitch, high temperature 65996-93-2 < 0.01 0.1

Trichloroethylene 79-01-6 < 0.01 0.1

2-Methoxyethanol 109-86-4 < 0.01 0.1

2-Ethoxyethanol 110-80-5 < 0.01 0.1

2-Ethoxyethyl acetate 111-15-9 < 0.01 0.1

1,2-Benzenedicarboxylic acid, di-C7-11-branched

and linear alkyl ester (DHNUP) 68515-42-4 < 0.01 0.1

Hydrazine (as acetone azine) 7803-57-8

302-01-2 < 0.01 0.1

1-methyl-2-pyrrolidone 872-50-4 < 0.01 0.1

1,2,3-Trichloropropane 96-18-4 < 0.01 0.1


and linear alkyl esters, C7-rich (DIHP) 71888-89-6 < 0.01 0.1

2,2'-dichloro-4,4'-methylenedianiline (MOCA) 101-14-4 < 0.01 0.1

N,N-dimethylacetamide (DMAC) 127-19-5 < 0.01 0.1

bis(2-methoxyethyl) ether 111-96-6 < 0.01 0.1

1,2-Dichloroethane 107-06-2 < 0.01 0.1

2-Methoxyaniline; o-Anisidine 90-04-0 < 0.01 0.1

Bis(2-methoxyethyl) phthalate 117-82-8 < 0.01 0.1

Formaldehyde, oligomeric reaction products with

aniline (technical MDA) 25214-70-4 < 0.01 0.1

1,2-bis(2-methoxyethoxy)ethane (TEGDME;

triglyme) 112-49-2 < 0.01 0.1

1,2-dimethoxyethane; ethylene glycol dimethyl

ether (EGDME) 110-71-4 < 0.01 0.1

Formamide 75-12-7 < 0.01 0.1

TGIC (1,3,5-tris(oxiranylmethyl)-1,3,5-triazine-

2,4,6(1H,3H,5H)-trione) 2451-62-9 < 0.01 0.1

Β-TGIC (1,3,5-tris[(2S and 2R)-2,3-epoxypropyl]-

1,3,5-triazine-2,4,6-(1H,3H,5H)-trione) 59653-74-6 < 0.01 0.1

Bis(pentabromophenyl) ether (DecaBDE) 1163-19-5 < 0.01 0.1

Cyclohexane-1,2-dicarboxylic anhydride

(Hexahydrophthalic anhydride - HHPA)

85-42-7

< 0.01 0.1

Hexahydromethylphthalic anhydride 25550-51-0 < 0.01 0.1

Hexahydro-4-methylphthalic anhydride 19438-60-9 < 0.01 0.1


Page : 5 of 31



(%)

Limit

(%)



1,2-benzenedicarboxylic acid, dipentylester,

branched and linear 84777-06-0 < 0.01 0.1

Diisopentylphthalate (DIPP) 605-50-5 < 0.01 0.1

N-pentyl-isopentylphthalate 776297-69-9 < 0.01 0.1

1,2-Diethoxyethane 629-14-1 < 0.01 0.1

N,N-dimethylformamide; dimethyl formamide 68-12-2 < 0.01 0.1

Furan 110-00-9 < 0.01 0.1

Propylene oxide; 1,2-epoxypropane; methyloxirane 75-56-9 < 0.01 0.1

Diethyl sulphate 64-67-5 < 0.01 0.1

Dimethyl sulphate 77-78-1 < 0.01 0.1

4,4'-methylenedi-o-toluidine 838-88-0 < 0.01 0.1

4,4'-oxydianiline and its salts 101-80-4 < 0.01 0.1

4-Aminoazobenzene; 4-Phenylazoaniline 60-09-3 < 0.01 0.1

4-methyl-m-phenylenediamine (2,4-toluene-

diamine) 95-80-7 < 0.01 0.1

6-methoxy-m-toluidine (p-cresidine) 120-71-8 < 0.01 0.1

Biphenyl-4-ylamine 92-67-1 < 0.01 0.1

O-aminoazotoluene 97-56-3 < 0.01 0.1

O-Toluidine; 2-Aminotoluene 95-53-4 < 0.01 0.1

N-methylacetamide 79-16-3 < 0.01 0.1

1-bromopropane; n-propyl bromide 106-94-5 < 0.01 0.1

Dipentyl phthalate (DPP, DAP) 131-18-0 < 0.01 0.1

Dihexyl phthalate (DnHP) 84-75-3 < 0.01 0.1

Trixylyl phosphate 25155-23-1 < 0.01 0.1

1,2-Benzenedicarboxylic acid, dihexyl ester,

branched and linear (DIHP + DnHP) 68515-50-4 < 0.01 0.1

4-(1,1,3,3-tetramethylbutyl)phenol, (4-tert-

Octylphenol) 140-66-9 < 0.01 0.1

Phenolphthalein 77-09-8 < 0.01 0.1

4,4'-bis(dimethylamino)benzophenone (Michler's

ketone) 90-94-8 < 0.01 0.1

N,N,N',N'-tetramethyl-4,4'-methylenedianiline

(Michler's base) 101-61-1 < 0.01 0.1


Page : 6 of 31



(%)

Limit

(%)

[4-[4,4'-bis(dimethylamino)

benzhydrylidene]cyclohexa-2,5-dien-1-

ylidene]dimethylammonium chloride (C.I. Basic

Violet 3)

548-62-9 < 0.01 0.1

[4-[[4-anilino-1-naphthyl][4-

(dimethylamino)phenyl]methylene]cyclohexa-2,5-

dien-1-ylidene] dimethylammonium chloride (C.I.

Basic Blue 26)

2580-56-5 < 0.01 0.1

α,α-Bis[4-(dimethylamino)phenyl]-4

(phenylamino)naphthalene-1-methanol (C.I.

Solvent Blue 4)

6786-83-0 < 0.01 0.1

Pentacosafluorotridecanoic acid 72629-94-8 < 0.01 0.1

Tricosafluorododecanoic acid 307-55-1 < 0.01 0.1

Henicosafluoroundecanoic acid 2058-94-8 < 0.01 0.1

Heptacosafluorotetradecanoic acid 376-06-7 < 0.01 0.1

4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated -- < 0.01 0.1

4-Nonylphenol, branched and linear -- < 0.01 0.1

Methoxy acetic acid 625-45-6 < 0.01 0.1

3-ethyl-2-methyl-2-(3-methylbutyl)-1,3-oxazolidine 143860-04-2 < 0.01 0.1

Dinoseb 88-85-7 < 0.01 0.1

Diazene-1,2-dicarboxamide (C,C'-

azodi(formamide)) 123-77-3 < 0.01 0.1

4,4'-bis(dimethylamino)-4''-(methylamino)trityl

alcohol 561-41-1 < 0.01 0.1

4-Nonylphenol, branched and linear, ethoxylated -- < 0.01 0.1

Ammonium pentadecafluorooctanoate (APFO) 3825-26-1 < 0.01 0.1

Pentadecafluorooctanoic acid (PFOA) 335-67-1 < 0.01 0.1

C.I. Direct Black 38 1937-37-7 < 0.01 0.1

C.I. Direct Red 28 573-58-0 < 0.01 0.1

Imidazolidine-2-thione; (2-imidazoline-2-thiol);

Ethylenethiourea 96-45-7 < 0.01 0.1

2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320) 3846-71-7 < 0.01 0.1

2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol

(UV-328) 25973-55-1 < 0.01 0.1

Bis(tributyltin)oxide (TBTO) 1

56-35-9 < 0.01 0.1

Dibutyltin dichloride (DBT) 1 683-18-1 < 0.01 0.1


Page : 7 of 31



(%)

Limit

(%)

oxo-8-oxa-3,5-dithia-4-stannatetradecanoate

(DOTE) 1

15571-58-1 < 0.01 0.1

Reaction mass of 2-ethylhexyl 10-ethyl-4,4-dioctyl-

7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate and

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-

oxoethyl]thio]-4-octyl-7-oxo-8-oxa-3,5-dithia-4-

stannatetradecanoate (reaction mass of DOTE and

MOTE) 1

-- < 0.01 0.1

Cobalt dichloride 1 7646-79-9 < 0.01 0.1

Diarsenic pentaoxide 1 1303-28-2 < 0.01 0.1

Diarsenic trioxide 1 1327-53-3 < 0.01 0.1

Lead hydrogen arsenate 1 7784-40-9 < 0.01 0.1

Sodium dichromate 1

10588-01-9 and

7789-12-0 < 0.01 0.1

Triethyl arsenate 1 15606-95-8 < 0.01 0.1

Aluminiosilicate, Refractory Ceramic Fibres 1 -- < 0.01 0.1

Zirconia Aluminosilicate Refractory Ceramic Fibres 1

-- < 0.01 0.1

Lead chromate 1 7758-97-6 < 0.01 0.1

Lead chromate molybdate sulphate red (C.I. Pigment Red 104)

1

12656-85-8 < 0.01 0.1

Lead sulfochromate yellow (C.I. Pigment Yellow 34)

1

1344-37-2 < 0.01 0.1

Boric acid 1

10043-35-3 / 11113-50-1

< 0.01 0.1

Disodium tetraborate, anhydrous 1

1303-96-4/ 1330-43-4/ 12179-04-3

< 0.01 0.1

Tetraboron disodium heptaoxide, hydrate 1 12267-73-1 < 0.01 0.1

Sodium chromate 1 7775-11-3 < 0.01 0.1

Potassium chromate 1 7789-00-6 < 0.01 0.1

Ammonium dichromate 1 7789-09-5 < 0.01 0.1

Potassium dichromate 1 7778-50-9 < 0.01 0.1

Cobalt(II) sulphate 1 10124-43-3 < 0.01 0.1

Cobalt(II) dinitrate 1 10141-05-6 < 0.01 0.1

Cobalt(II) carbonate 1 513-79-1 < 0.01 0.1

Cobalt(II) diacetate 1 71-48-7 < 0.01 0.1

Chromium trioxide 1 1333-82-0 < 0.01 0.1

Acids generated from chromium trioxide and their oligomers

Chromic acid 1 7738-94-5 < 0.01 0.1

Dichromic acid 1 13530-68-2 < 0.01 0.1


Page : 8 of 31



(%)

Limit

(%)

Strontium chromate 1 7789-06-2 < 0.01 0.1

Lead dipicrate 1 6477-64-1 < 0.01 0.1

Lead styphnate 1 15245-44-0 < 0.01 0.1

Lead diazide 1 13424-46-9 < 0.01 0.1

trilead diarsenate 1 3687-31-8 < 0.01 0.1

Calcium arsenate 1 7778-44-1 < 0.01 0.1

Arsenic acid 1 7778-39-4 < 0.01 0.1

Pentazinc chromate octahydroxide 1 49663-84-5 < 0.01 0.1

Potassium hydroxyoctaoxodizincatedi- Chromate

1

11103-86-9 < 0.01 0.1

Dichromium tris(chromate) 1 24613-89-6 < 0.01 0.1

Diboron trioxide 1 1303-86-2 < 0.01 0.1

Lead(II) bis(methanesulfonate) 1 17570-76-2 < 0.01 0.1

Acetic acid, lead salt, basic 1 51404-69-4 < 0.01 0.1

Basic lead carbonate (trilead bis(carbonate)dihydroxide)

1

1319-46-6 < 0.01 0.1

Lead oxide sulfate (basic lead sulfate) 1 12036-76-9 < 0.01 0.1

[Phthalato(2-)]dioxotrilead (dibasic lead phthalate) 1 69011-06-9 < 0.01 0.1

Dioxobis(stearato)trilead 1 12578-12-0 < 0.01 0.1

Fatty acids, C16-18, lead salts 1 91031-62-8 < 0.01 0.1

Lead bis(tetrafluoroborate) 1 13814-96-5 < 0.01 0.1

Lead cynamidate 1 20837-86-9 < 0.01 0.1

Lead dinitrate 1 10099-74-8 < 0.01 0.1

Lead oxide (lead monoxide) 1 1317-36-8 < 0.01 0.1

Lead tetroxide (orange lead) 1 1314-41-6 < 0.01 0.1

Lead titanium trioxide 1 12060-00-3 < 0.01 0.1

Lead Titanium Zirconium Oxide 1 12626-81-2 < 0.01 0.1

Pentalead tetraoxide sulphate 1 12065-90-6 < 0.01 0.1

Pyrochlore, antimony lead yellow 1 8012-00-8 < 0.01 0.1

Silicic acid, barium salt, lead-doped 1 68784-75-8 < 0.01 0.1

Silicic acid, lead salt 1 11120-22-2 < 0.01 0.1

Sulfurous acid, lead salt, dibasic 1 62229-08-7 < 0.01 0.1

Tetraethyllead 1 78-00-2 < 0.01 0.1

Tetralead trioxide sulphate 1 12202-17-4 < 0.01 0.1

Trilead dioxide phosphonate 1 12141-20-7 < 0.01 0.1

Cadmium 1 7440-43-9 < 0.01 0.1

Cadmium oxide 1 1306-19-0 < 0.01 0.1

Cadmium sulphide 1 1306-23-6 < 0.01 0.1

Lead di(acetate) 1 301-04-2 < 0.01 0.1

Sodium peroxometaborate 1 7632-04-4 < 0.01 0.1

Cadmium chloride 1 10108-64-2 < 0.01 0.1

Sodium perborate; perboric acid, sodium salt 1 -- < 0.01 0.1


Page : 9 of 31



(%)

Limit

(%)

Cadmium fluoride 1 7790-79-6 < 0.01 0.1

Cadmium sulphate 1

10124-36-4; 31119-53-6

< 0.01 0.1

1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0.3% of dihexyl phthalate

68515-51-5; 68648-93-1

< 0.01 0.1

5-sec-butyl-2-(2,4-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [1], 5-sec-butyl-2-(4,6-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [2] [covering any of the individual stereoisomers of [1] and [2] or any combination thereof]

-- < 0.01 0.1

1,3-propanesultone 1120-71-4 < 0.01 0.1

Nitrobenzene 98-95-3 < 0.01 0.1

2,4-di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol (UV-327)

3864-99-1 < 0.01 0.1

2-(2H-benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl)phenol (UV-350)

36437-37-3 < 0.01 0.1

Perfluorononan-1-oic acid (PFNA) 375-95-1 21049-39-8 4149-60-4

< 0.01 0.1

Benzo[def]chrysene 50-32-8 < 0.01 0.1

REMARK:

1. The substances were tested in term of their composing elements (i.e. Arsenic, Chromium, Cobalt, Lead, Tin, Aluminum, Silicon, Zirconium, Boron, Strontium, Zinc, Antimony, Barium, Titanium and Cadmium).

2. The reporting limit is 0.01%.

3. When the SVHC concentrations of an article do not exceed 0.1%, the legal notification obligations to ECHA are not

applicable. When the SVHC concentrations of an article exceed 0.1%, the legal notification obligations to ECHA should be

further studied, depending on the annual quantities of the SVHC in the articles of the manufacturer/ importer.


Page : 10 of 31






Sample ID: 001E


(%)

Limit

(%)











25637-99-4 and

3194-55-6

(134237-51-7,

134237-50-6,

134237-52-8)

< 0.01 0.1


Paraffins) 85535-84-8 < 0.01 0.1

Anthracene 120-12-7 < 0.01 0.1

Acrylamide 79-06-1 < 0.01 0.1

2,4-Dinitrotoluene 121-14-2 < 0.01 0.1


Anthracene oil 90640-80-5 < 0.01 0.1



91995-15-2 < 0.01 0.1


Page : 11 of 31



(%)

Limit

(%)





2-Methoxyethanol 109-86-4 < 0.01 0.1

2-Ethoxyethanol 110-80-5 < 0.01 0.1





302-01-2 < 0.01 0.1








1,2-Dichloroethane 107-06-2 < 0.01 0.1






triglyme) 112-49-2 < 0.01 0.1


ether (EGDME) 110-71-4 < 0.01 0.1

Formamide 75-12-7 < 0.01 0.1


2,4,6(1H,3H,5H)-trione) 2451-62-9 < 0.01 0.1






85-42-7

< 0.01 0.1




Page : 12 of 31



(%)

Limit

(%)







1,2-Diethoxyethane 629-14-1 < 0.01 0.1


Furan 110-00-9 < 0.01 0.1








diamine) 95-80-7 < 0.01 0.1













Octylphenol) 140-66-9 < 0.01 0.1



ketone) 90-94-8 < 0.01 0.1


(Michler's base) 101-61-1 < 0.01 0.1


Page : 13 of 31



(%)

Limit

(%)




Violet 3)

548-62-9 < 0.01 0.1




Basic Blue 26)

2580-56-5 < 0.01 0.1



Solvent Blue 4)

6786-83-0 < 0.01 0.1









Dinoseb 88-85-7 < 0.01 0.1


azodi(formamide)) 123-77-3 < 0.01 0.1


alcohol 561-41-1 < 0.01 0.1




C.I. Direct Black 38 1937-37-7 < 0.01 0.1

C.I. Direct Red 28 573-58-0 < 0.01 0.1





(UV-328) 25973-55-1 < 0.01 0.1


56-35-9 < 0.01 0.1



Page : 14 of 31



(%)

Limit

(%)


(DOTE) 1

15571-58-1 < 0.01 0.1






MOTE) 1

-- < 0.01 0.1





Sodium dichromate 1

10588-01-9 and

7789-12-0 < 0.01 0.1




-- < 0.01 0.1

Lead chromate 1 7758-97-6 < 0.01 0.1


1

12656-85-8 < 0.01 0.1


1

1344-37-2 < 0.01 0.1

Boric acid 1

10043-35-3 / 11113-50-1

< 0.01 0.1


1303-96-4/ 1330-43-4/ 12179-04-3

< 0.01 0.1


Sodium chromate 1 7775-11-3 < 0.01 0.1










Chromic acid 1 7738-94-5 < 0.01 0.1

Dichromic acid 1 13530-68-2 < 0.01 0.1


Page : 15 of 31



(%)

Limit

(%)


Lead dipicrate 1 6477-64-1 < 0.01 0.1

Lead styphnate 1 15245-44-0 < 0.01 0.1

Lead diazide 1 13424-46-9 < 0.01 0.1



Arsenic acid 1 7778-39-4 < 0.01 0.1



1

11103-86-9 < 0.01 0.1






1

1319-46-6 < 0.01 0.1






Lead cynamidate 1 20837-86-9 < 0.01 0.1

Lead dinitrate 1 10099-74-8 < 0.01 0.1













Cadmium 1 7440-43-9 < 0.01 0.1

Cadmium oxide 1 1306-19-0 < 0.01 0.1


Lead di(acetate) 1 301-04-2 < 0.01 0.1





Page : 16 of 31



(%)

Limit

(%)


Cadmium sulphate 1

10124-36-4; 31119-53-6

< 0.01 0.1


68515-51-5; 68648-93-1

< 0.01 0.1


-- < 0.01 0.1

1,3-propanesultone 1120-71-4 < 0.01 0.1

Nitrobenzene 98-95-3 < 0.01 0.1


3864-99-1 < 0.01 0.1


36437-37-3 < 0.01 0.1


< 0.01 0.1


REMARK:







Page : 17 of 31






Sample ID: 001B+001C+001J+001K+001L+001M+001N


(%)

Limit

(%)











25637-99-4 and

3194-55-6

(134237-51-7,

134237-50-6,

134237-52-8)

< 0.01 0.1


Paraffins) 85535-84-8 < 0.01 0.1

Anthracene 120-12-7 < 0.01 0.1

Acrylamide 79-06-1 < 0.01 0.1

2,4-Dinitrotoluene 121-14-2 < 0.01 0.1


Anthracene oil 90640-80-5 < 0.01 0.1



91995-15-2 < 0.01 0.1


Page : 18 of 31



(%)

Limit

(%)





2-Methoxyethanol 109-86-4 < 0.01 0.1

2-Ethoxyethanol 110-80-5 < 0.01 0.1





302-01-2 < 0.01 0.1








1,2-Dichloroethane 107-06-2 < 0.01 0.1






triglyme) 112-49-2 < 0.01 0.1


ether (EGDME) 110-71-4 < 0.01 0.1

Formamide 75-12-7 < 0.01 0.1


2,4,6(1H,3H,5H)-trione) 2451-62-9 < 0.01 0.1






85-42-7

< 0.01 0.1




Page : 19 of 31



(%)

Limit

(%)







1,2-Diethoxyethane 629-14-1 < 0.01 0.1


Furan 110-00-9 < 0.01 0.1








diamine) 95-80-7 < 0.01 0.1













Octylphenol) 140-66-9 < 0.01 0.1



ketone) 90-94-8 < 0.01 0.1


(Michler's base) 101-61-1 < 0.01 0.1


Page : 20 of 31



(%)

Limit

(%)




Violet 3)

548-62-9 < 0.01 0.1




Basic Blue 26)

2580-56-5 < 0.01 0.1



Solvent Blue 4)

6786-83-0 < 0.01 0.1









Dinoseb 88-85-7 < 0.01 0.1


azodi(formamide)) 123-77-3 < 0.01 0.1


alcohol 561-41-1 < 0.01 0.1




C.I. Direct Black 38 1937-37-7 < 0.01 0.1

C.I. Direct Red 28 573-58-0 < 0.01 0.1





(UV-328) 25973-55-1 < 0.01 0.1


56-35-9 < 0.01 0.1



Page : 21 of 31



(%)

Limit

(%)


(DOTE) 1

15571-58-1 < 0.01 0.1






MOTE) 1

-- < 0.01 0.1





Sodium dichromate 1

10588-01-9 and

7789-12-0 < 0.01 0.1




-- < 0.01 0.1

Lead chromate 1 7758-97-6 < 0.01 0.1


1

12656-85-8 < 0.01 0.1


1

1344-37-2 < 0.01 0.1

Boric acid 1

10043-35-3 / 11113-50-1

< 0.01 0.1


1303-96-4/ 1330-43-4/ 12179-04-3

< 0.01 0.1


Sodium chromate 1 7775-11-3 < 0.01 0.1










Chromic acid 1 7738-94-5 < 0.01 0.1

Dichromic acid 1 13530-68-2 < 0.01 0.1


Page : 22 of 31



(%)

Limit

(%)


Lead dipicrate 1 6477-64-1 < 0.01 0.1

Lead styphnate 1 15245-44-0 < 0.01 0.1

Lead diazide 1 13424-46-9 < 0.01 0.1



Arsenic acid 1 7778-39-4 < 0.01 0.1



1

11103-86-9 < 0.01 0.1






1

1319-46-6 < 0.01 0.1






Lead cynamidate 1 20837-86-9 < 0.01 0.1

Lead dinitrate 1 10099-74-8 < 0.01 0.1













Cadmium 1 7440-43-9 < 0.01 0.1

Cadmium oxide 1 1306-19-0 < 0.01 0.1


Lead di(acetate) 1 301-04-2 < 0.01 0.1





Page : 23 of 31



(%)

Limit

(%)


Cadmium sulphate 1

10124-36-4; 31119-53-6

< 0.01 0.1


68515-51-5; 68648-93-1

< 0.01 0.1


-- < 0.01 0.1

1,3-propanesultone 1120-71-4 < 0.01 0.1

Nitrobenzene 98-95-3 < 0.01 0.1


3864-99-1 < 0.01 0.1


36437-37-3 < 0.01 0.1


< 0.01 0.1


REMARK:







Page : 24 of 31






Sample ID: 001F+001G+001H+001I+001O+001P+001Q


(%)

Limit

(%)











25637-99-4 and

3194-55-6

(134237-51-7,

134237-50-6,

134237-52-8)

< 0.01 0.1


Paraffins) 85535-84-8 < 0.01 0.1

Anthracene 120-12-7 < 0.01 0.1

Acrylamide 79-06-1 < 0.01 0.1

2,4-Dinitrotoluene 121-14-2 < 0.01 0.1


Anthracene oil 90640-80-5 < 0.01 0.1



91995-15-2 < 0.01 0.1


Page : 25 of 31



(%)

Limit

(%)





2-Methoxyethanol 109-86-4 < 0.01 0.1

2-Ethoxyethanol 110-80-5 < 0.01 0.1





302-01-2 < 0.01 0.1








1,2-Dichloroethane 107-06-2 < 0.01 0.1






triglyme) 112-49-2 < 0.01 0.1


ether (EGDME) 110-71-4 < 0.01 0.1

Formamide 75-12-7 < 0.01 0.1


2,4,6(1H,3H,5H)-trione) 2451-62-9 < 0.01 0.1






85-42-7

< 0.01 0.1




Page : 26 of 31



(%)

Limit

(%)







1,2-Diethoxyethane 629-14-1 < 0.01 0.1


Furan 110-00-9 < 0.01 0.1








diamine) 95-80-7 < 0.01 0.1













Octylphenol) 140-66-9 < 0.01 0.1



ketone) 90-94-8 < 0.01 0.1


(Michler's base) 101-61-1 < 0.01 0.1


Page : 27 of 31



(%)

Limit

(%)




Violet 3)

548-62-9 < 0.01 0.1




Basic Blue 26)

2580-56-5 < 0.01 0.1



Solvent Blue 4)

6786-83-0 < 0.01 0.1









Dinoseb 88-85-7 < 0.01 0.1


azodi(formamide)) 123-77-3 < 0.01 0.1


alcohol 561-41-1 < 0.01 0.1




C.I. Direct Black 38 1937-37-7 < 0.01 0.1

C.I. Direct Red 28 573-58-0 < 0.01 0.1





(UV-328) 25973-55-1 < 0.01 0.1


56-35-9 < 0.01 0.1



Page : 28 of 31



(%)

Limit

(%)


(DOTE) 1

15571-58-1 < 0.01 0.1






MOTE) 1

-- < 0.01 0.1





Sodium dichromate 1

10588-01-9 and

7789-12-0 < 0.01 0.1




-- < 0.01 0.1

Lead chromate 1 7758-97-6 < 0.01 0.1


1

12656-85-8 < 0.01 0.1


1

1344-37-2 < 0.01 0.1

Boric acid 1

10043-35-3 / 11113-50-1

< 0.01 0.1


1303-96-4/ 1330-43-4/ 12179-04-3

< 0.01 0.1


Sodium chromate 1 7775-11-3 < 0.01 0.1










Chromic acid 1 7738-94-5 < 0.01 0.1

Dichromic acid 1 13530-68-2 < 0.01 0.1


Page : 29 of 31



(%)

Limit

(%)


Lead dipicrate 1 6477-64-1 < 0.01 0.1

Lead styphnate 1 15245-44-0 < 0.01 0.1

Lead diazide 1 13424-46-9 < 0.01 0.1



Arsenic acid 1 7778-39-4 < 0.01 0.1



1

11103-86-9 < 0.01 0.1






1

1319-46-6 < 0.01 0.1






Lead cynamidate 1 20837-86-9 < 0.01 0.1

Lead dinitrate 1 10099-74-8 < 0.01 0.1













Cadmium 1 7440-43-9 < 0.01 0.1

Cadmium oxide 1 1306-19-0 < 0.01 0.1


Lead di(acetate) 1 301-04-2 < 0.01 0.1





Page : 30 of 31



(%)

Limit

(%)


Cadmium sulphate 1

10124-36-4; 31119-53-6

< 0.01 0.1


68515-51-5; 68648-93-1

< 0.01 0.1


-- < 0.01 0.1

1,3-propanesultone 1120-71-4 < 0.01 0.1

Nitrobenzene 98-95-3 < 0.01 0.1


3864-99-1 < 0.01 0.1


36437-37-3 < 0.01 0.1


< 0.01 0.1


REMARK:







Page : 31 of 31


SAMPLE PHOTO

TERMS AND CONDITIONS OF SERVICE

UL Quality Assurance Private Limited undertakes to provide services (“Work(s)”) to its Customer subject to the terms and conditions (“Terms”) contained herein. The term of limitation of liability contained herein has been conspicuously marked to draw to the attention of the Customer. The Customer is advised to take separate legal advice and is fully aware of the meaning and the legal

significance of this term. The Customer agrees that this term is integral part of this Agreement.

COMPUTATION OF CHARGES AND PAYMENT

1.1 (a) Consulting time shall be charged on a daily basis.

(b) Where the personnel of UL QA are assigned to its Customer for any in-house projects, the Customer shall be billed on an hourly basis on the compensation rates of its personnel.

1.2 Disbursements incurred on the Customer’s behalf such as expenditure for communications, transportation, travel, purchase of any materials, tools, equipment, components or parts which are directly related to the Work(s) shall be billed

at costs and shall additionally include UL QA’s reasonable handling charge at the discretion of UL QA.

1.3 Where in the opinion of UL QA the Work(s) are time consuming entailing the use of special equipment and disbursements, the Customer shall be charged on an “equipment-hour” basis on the time spent.

1.4 Payments shall be made in Indian Rupees at UL QA’s address or at such other address and in such manner as UL QA may from time to time specify. All Payments that are made by any method other than a pre paid recorded delivery

will l be at the sole and absolute risk of the Customer. 1.5 The Customer undertakes during the continuance of this Agreement: -

(a) to Pay punctually and in any event with in 7 days from the date of the invoice or debit note (unless agreed otherwise) for all work(s) rendered to the Customer from time to time;

(b) where the Customer fails to pay within time, UL QA shall be entitled to charge interest on overdue invoices at the rate of 2% per month;

(c) UL QA shall have a lien on any property of the Customer in UL QA’s possession until payment but the exercise of such lien shall not prevent interest from accruing.

1.6 If the Customer fails to pay UL QA for any reason under Clause 1.5 or if the Customer shall commit a breach of any of its obligation under this Agreement or if a receiver of the Customer is appointed or if any resolution or petition to

wind up the Customer’s business shall be passed or presented (except for the purpose of reconstruction), UL QA may without prejudice to its other rights either suspend or terminate the Agreement and in such an event UL QA may also

suspend or terminate any other existing contracts without any liability for damages, if any, arising there under. OBLIGATIONS OF THE CUSTOMER

2.1 If the Customer intends to make any change(s) to the Work(s) hereunder or assign any other work to UL QA prior to the completion of Work(s), such a change or new assignment shall only be effective in writing between both of the

parties. If UL QA suffers from any loss or damage due to such a change or new assignment, the Customer shall compensate UL QA for such losses and damages.

2.2 If the Work(s) undertaken by UL QA hereunder requires any assistance from the Customer, the Customer shall be obliged to provide all necessary and reasonable cooperation and assistance which UL QA may deem fit. If the Work(s)

undertaken by UL QA hereunder cannot be completed due to the Customer’s failure or inadequacy in assistance or cooperation, UL QA reserves the right to require the Customer to perform its obligation within a specified period of time and the time limit for UL QA to complete its Work(s) shall be extended simultaneously. If upon the expiration of specified time period the Customer still fails to perform its obligation to assist, UL QA reserves the right to terminate this

Agreement, without prejudice to any other rights of UL QA hereunder or under any applicable laws and regulations. SAMPLES

3.1 The Customer shall abide by all applicable laws, rules and regulations while shipping samples or other goods or material to UL QA. UL QA reserves the right to impose additional charges on the Customer for costs incurred by UL QA

due to improper shipping, such as (a) to identify samples to UL QA ; and (b) for cost and damages incurred to UL QA personnel or property as a result of improper packaging, labeling or omission of identifying documents. UL QA

reserves the right to refuse receipt of any shipment that, in its discretion, is unsafe or has been shipped improperly. Any costs related to the refusal to accept shipment under this clause will be borne by the customer. The Customer

shall indemnify and hold UL QA harmless for any and all damages, expenses, fines, judgments, liabilities and costs (including attorney’s fee) incurred by UL QA and arising from the improper packaging or shipment of the samples by

the Customer. PATENT RIGHTS

4.1 Any invention made in the performance of Work(s) for the Customer by UL QA within the field of Work(s) undertaken for the Customer shall belong to the Customer.

4.2 UL QA’s use of the aforesaid inventions shall be free of any royalty fees Or other charges provided that the use of such inventions are confined to the performance of Work(s) for the Customer. CONFIDENTIAL TREATMENT OF INFORMATION

5.1 Unless otherwise specifically agreed between the parties, the Work(s) rendered by UL QA to the Customer shall be on a non-exclusive best-efforts basis.

5.2 It is explicitly agreed by UL QA and the Customer that all technical information (whether contained in models, drawings, reproductions of drawings, written reports, letters, memoranda or notes or in any other form) shall be kept strictly

confidential by UL QA for the purposes of this Agreement and UL QA shall at all times use all reasonable efforts to prevent disclosure to third parties of any part thereof unless UL QA shall have first obtained the written consent of the

Customer specifically authorizing such disclosure PROVIDED ALWAYS AND IT IS MUTUALLY AGREED that the confidentiality shall extend for a period of five (5) years from the date of completion of its Work(s) and PROVIDED

FURTHER that UL QA shall not be liable under this clause if through no fault of UL QA the information is already in the public domain ; or the information has come to the knowledge of UL QA from a third party ; or is independently

developed by UL QA without recourse to the materials provided by the Customer; or the information is necessary for performance by UL QA under this Agreement; or is disclosed in accordance with a judgment or order issued by a

competent court of any jurisdiction to which the Agreement is subject, or with an order, notice or requirement issued by a governmental authority; or is disclosed to the certification or accreditation bodies with which the information are

relevant to the scope of certification or accreditation in order to assess UL QA’s competence and compliance with the relevant certification or accreditation criteria.

5.3 UL QA undertakes that the identity of its Customers and the nature of Work(s) rendered shall be kept confidential unless the Customer agrees in writing to their release PROVIDED ALWAYS that UL QA shall not be liable under this

clause if through no fault act or failure on its part the identity of the Customer or the nature of the Work(s) is released into the public domain by the Customer or a third party. DATA AND DOCUMENT RETENTION

6.1 (a) After the Work(s) are rendered, UL QA may retain a copy of all documents relating to the Work(s) (the “Supporting Documents”) for as long as UL QA, in its sole discretion, deems fit. (b) Unless otherwise specified or required by the applicable law, the Supporting Documents over three (3) years of age will be automatically destroyed by UL QA without prior notice to the Customer. Should any or all Supporting

Documents less than three (3) years are scheduled to be destroyed, UL QA shall give the Customer thirty (30) days’ written notice to the Customer’s last known address of its intention to destroy the Supporting Documents. Unless

the Customer makes a written request to UL QA which is received by UL QA before the expiration of the said thirty (30) days seeking delivery of those documents to the Customer at the Customer’s expenses, those documents shall

be destroyed.

(c) The Customer shall indemnify UL QA for any costs or expenses in responding to or opposing any claims, Suits or losses or for the production of any documents in Court seeking the disclosure of the said documents or any

information contained therein. SOLICITATION OF EMPLOYEES

7.1 It is mutually agreed that neither party shall solicit the employees of the other for employment or hire unless prior written consent to do so is obtained. E-MAIL DISCLAIMER

8.1 UL QA shall upon the written request of the Customer send the final report(s) / result(s) hereunder by e-mail rather than by paper hard copy. The Customer agrees that the report(s) result(s) in electronic version may inadvertently be

modified once it is in the Customer’s word processing system. And that the current e-mail transmission technology may allow for interception of message(s) and report(s) / result(s) by third parties. The Customer agrees not to hold UL

QA responsible for these risks, if they arise . The Customer also agrees that the report(s) / result(s) shall be sent by UL QA unencrypted. Transmission of the report(s) / result(s) (or other material(s) requested by the Customer) via the internet or other public network shall not be considered to constitute a breach of any confidentiality or other provisions of this Agreement between UL QAand the Customer, and UL QAshall in no way be liable for any damages resulting

from such a transmission. Additionally, UL QAshall not be liable for any damages incurred by the Customer for any changes made to the report(s) / result(s) after it has been transmitted. LIMITATION OF LIABILITY

9.1 Subject to Clause 9.2 and notwithstanding anything contained in this Agreement, in no circumstances (except where UL QAhas willfully refused to perform any of its obligations under this Agreement or under any order placed pursuant

to Clause 2.1) shall UL QAbe liable TO Third parties, in contract, tort (including negligence or breach of statutory duty) or otherwise howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or

anticipating savings; or (b) for any special indirect or consequential damage of any nature whatsoever.

9.2 If and to the extent that UL QA is liable to the Customer, in contract, tort or otherwise and whatsoever,,UL QA’s liability shall in no circumstances exceed a total aggregate sum equal to 10 times the amount of the fee paid in respect of

the specific Work which gives rise to such claim. INDEMNITY

10.1 In the event of actual or threatened suit, claim or other proceedings against UL QA in relation to the Work(s) undertaken on behalf of the Customer or in relation to any of the Products or the Trade Mark or Patent of the Customer or of

any allegation of infringement of any letters patent, registered design, trade mark or trade name, the Customer shall indemnify and hold UL QA harmless from and against any liability, action, claim, demand, costs, charges and

expenses arising there from or expenses including solicitors fees, counsel fees in defending such action PROVIDED ALWAYS that the Customer will at its own election either effect any settlement or compromise or at its own expenses

defend any such action or proceeding and the Customer shall pay the costs of any settlement or compromise effected. EFFECT OF PROPOSAL

11.1 The accompanying proposal is valid for a period of ninety (90) days from the date of the proposal unless extended in writing by UL QA. Upon the acceptance of such proposal, this Terms shall form the basis of the contract with the

Customer and notwithstanding any prior discussions or prior oral or written agreements to the contrary, the Terms herein shall be applicable and take precedence over any conflicting terms contained in any documents submitted by the

Customer.

MISCELLANEOUS PROVISIONS

12.1 Any provision of this Agreement which are or become prohibited by or are unlawful or unenforceable under any law actually applied by any court of competent jurisdiction shall, to the extent required by such law, be severed from this

Agreement and rendered ineffective so far as is possible without modifying the remaining provisions of this Agreement. Where however the provisions of any such applicable law may be waived, they are hereby waived by the parties hereto to the full extent permitted by such law to the end that this Agreement shall be valid and binding agreement enforceable in accordance with these Terms.

12.2 A certificate signed by any officer of UL QA as to the amount due from the Customer hereunder at the date of such certificate shall, in the absence of manifest error, be conclusive evidence of the amount due.

12.3 Nothing in this Agreement shall be considered to form a partnership, agency or employment relationship between the parties. No party shall represent that it acts as agent for another or has any capacity to bind another in any

contractual or other arrangements.

12.4 Save as herein otherwise provided any notice required to be given hereunder shall be sufficiently given if given in writing or by facsimile, email, internet or other possible means to the last known postal address or fax number or email

address of the addresses and every notice shall be deemed to have been received and given at the time when in the course of transmission it should have been delivered at the address or fax number or email address to which it was

sent.

12.5 Any report or certificate does not relieve seller(s) / supplier(s) from their contractual responsibility with regards to the quality/quantity of this delivery nor does it prejudice the Customer’s right to claim towards seller(s) / supplier(s) for

compensation for any apparent and/or hidden defects not detected during UL QA’s random inspection or testing or audit. GOVERNING LAW

13.1 This Agreement and the rights and obligations of the parties shall in all respects be governed, construed, interpreted and operated with Indian Law.

***** End of Report *****