system controller · 2015-10-21 · alarm1 on alarm2 on d+ d- txd+ txd-gnd a.com a.no axicom imo3...
TRANSCRIPT
English
SYSTEM CONTROLLERQuick Guide SPC-2010
2_ English
What’s IncludedUnpack the product package and place the product on the floor or a flat surface. Check if the following components are all included in the product package.
1 2 3
4 5 6
7 8 9
CLR ENT
CAM
MENU
FUNC
MODE
SEARCH FREEZE ALARM
SETUP
AUDIO REC
GROUP
E S CPWR
A/F AUXPRESET
MON PTZ/DVR
PWR Tx Rx
0
PTZ IRIS
FOCUS
ZOOMW T
Main Unit User Manual Power Adaptor 1EA
Tx1Tx2
Tx3TRx
Terminal Block 1EA
English _3
english
system controller at a Glance
Front side
Item Description
a DVR Play Bar Play/Pause, Fast Forward/Fast Backward, Stop, Record
b ESC / PWR Cancels a command or turns power on/off.
c LCD Display Display the operation status and the setup menu of the system controller.
d Controller Selection Bar Used to select a camera, monitor or DVR.
e Joystick Controller
You can manipulate the Pan/Tilt operation up or down in connection with the PTZ camera or receiver unit. Turn the joystick clockwise or counter clockwise to control zooming. You can control the direction of the connected controller from the menu screen of the controller.
f Camera Operation Bar Runs Preset, Group, Auto Focus and Aux output functions.
g DVR Control Bar Executes the selected DVR’s Audio, Search, screen mode selection, Freeze and Alarm Control.
1 2 3
4 5 6
7 8 9
CLR ENT
CAM
MENU
FUNC
MODE
SEARCH FREEZE ALARM
SETUP
AUDIO REC
GROUP
E S CPWR
A/F AUXPRESET
MON PTZ/DVR
PWR Tx Rx
0
PTZ IRIS
FOCUS
ZOOMW T
a b c ed
fk hj gi
4_ English
Item Description
h Camera Lens Bar
IRIS Control Iris (-: CLOSE/+: OPEN)
FOCUS Adjust the focus (-: NEAR/+: FAR)
ZOOM Zoom In/Out (W: WIDE/T: TELE)
i Others
MENU Enters PTZ and DVR menu.
FUNC Press [FUNC] button and desired function button to run.
SETUP Press a number button and press [SETUP] button to enter the settings menu.
Used in DVR mode for controlling the camera connected to the DVR.
jNumber (0-9), ENT, CLR Buttons
Number (0-9) Used to specify numeric characters for camera, monitor, DVR or Preset settings.
ENT Move to a desired item using the navigation buttons and select it.
CLR Cancel the current operation.
k Jog ShuttleJog Used to search for forward/reverse frame in DVR play mode.
Shuttle Forward/Reverse/Play/FF/REW in DVR play mode.
English _5
english
rear side
Item Description
a Power DC 12V input port ( )
b RS-485/422 For RS-485/422 communication, connected to camera, DVR and other control devices.
M ` [PROGRAM] is not for user’s accessing.
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
a b
6_ English
to connect a rs-485/422 devIceWith the system controller, you can control the PTZ camera or DVR that supports RS-485/422 communication protocols.1. Connect the rear Tx1 with RS-485 port of the PTZ camera or DVR.2. According to the external device connected, select RS-485 (Half Duplex) or RS-422 (Full Duplex)
connection.
M ` For RS-485/422 communications, pay special attention to the polarity (+/-).
` Use the provided terminal block in the product package.
` Check if the RS-485/422 device is compatible with SPC-2010.
connecting rs-485/422 signal Wires• RS-485 Communications • RS-422 Communications
RXD+ TRx+RXD– TRx–
Camera ControllerRXD+
TXD+
Tx1+
TRx+
RXD–
TXD–
Tx1–
TRx–
Camera Controller
` You may use the Tx2 or Tx3 terminal instead of Tx1.
Tx1 Tx2 Tx3 TRx
Tx1 Tx2 Tx3 TRx
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
English _7
english
connecting the PtZ cameraBy connecting RS-485 port on the rear of the PTZ camera with Tx of SPC-2010, you can control the camera.
M ` Depending on the camera, the polarity may differ. For more information, refer to the user manual of the PTZ camera.
For the half duplex system - Connect Rx (+) of RS-485 port of the PTZ camera with TRx (+) of SPC-2010. - Connect Rx (–) of RS-485 port of the PTZ camera with TRx (–) of SPC-2010.
` If connecting a PTZ camera without using DVR device, you can connect to Tx1, Tx2 or Tx3 instead of TRx.
Tx1 Tx2 Tx3 TRx
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAMTx1 Tx2 Tx3 TRx IN1
IN2
GN
D IN
3 IN
4 G
ND
1C0M
1.N
0 1
.NC
2C0M
2.N
0 2
.NC
2N.C
2N.0
COM2
1N.C
1N.0
COM1
GND
IN4IN3
GND
IN2
IN1
Alarm
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
Video Out
AUDIO_OUTAUDIO_IN
RX+
RX-
TX+
TX-
GND
COM
N.O
ControllerAux
PowerAC 22~26V
Alarm2 ONAlarm1 ON
D+ D- TXD+ TXD- GND A.COM A.NO
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AUDIO_OUTAUDIO_IN
RX+
RX-
TX+
TX-
GND
COM
N.O
ControllerAux
AC 22~26V
D+ D- TXD+ TXD- GND A.COM A.NO
8_ English
For the full duplex system - Connect Rx (+) of RS-485 port of the PTZ camera with Tx1 (+) of SPC-2010. - Connect Rx (–) of RS-485 port of the PTZ camera with Tx1 (–) of SPC-2010. - Connect Tx (+) of RS-485 port of the PTZ camera with TRx (+) of SPC-2010. - Connect Tx (–) of RS-485 port of the PTZ camera with TRx (–) of SPC-2010.
connecting srd-16XX/8XX series dvrConnect between DVR and SPC-2010 using RS-485 port on the rear of the DVR.
For the half duplex system - Connect Tx (+) of RS-485 port of the DVR with TRx (+) of SPC-2010. - Connect Tx (–) of RS-485 port of the DVR with TRx (–) of SPC-2010.
Tx1 Tx2 Tx3 TRx
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
Tx1 Tx2 Tx3 TRx IN1
IN2
GND
IN3
IN4
GND
1C
0M
1.N0
1.NC
2C
0M
2.N0
2.NC
2N.C
2N.0
COM2
1N.C
1N.0
COM1
GND
IN4IN3
GND
IN2
IN1
Alarm
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
Video Out
AUDIO_OUTAUDIO_IN
RX+
RX-
TX+
TX-
GND
COM
N.O
ControllerAux
PowerAC 22~26V
Alarm2 ONAlarm1 ON
D+ D- TXD+ TXD- GND A.COM A.NO
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AXIC
OM
IMO
35V
DC
AUDIO_OUTAUDIO_IN
RX+
RX-
TX+
TX-
GND
COM
N.O
ControllerAux
AC 22~26V
D+ D- TXD+ TXD- GND A.COM A.NO
Tx1 Tx2 Tx3 TRx
CH 1
CH 3
CH 2
CH 4
AUDIO IN
AUDIO OUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
SPOT
ALARM INALARM OUT
INAC 100-240~
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
Tx1 Tx2 Tx3 TRx
CH 2
CH 4
AUDIO IN
AUDIO OUT
VIDEOOUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
ALARM OUT
English _9
english
For the full duplex system - Connect Tx (+) of RS-485 port of the DVR with TRx (+) of SPC-2010. - Connect Tx (–) of RS-485 port of the DVR with TRx (–) of SPC-2010. - Connect Rx (+) of RS-485 port of the DVR with Tx1 (+) of SPC-2010. - Connect Rx (–) of RS-485 port of the DVR with Tx1 (–) of SPC-2010.
connecting srd-4XX dvrConnect RS-485 port on the rear of SRD-4XX with SPC-2010.
For the half duplex system - Connect Tx (+) of SRD-4XX with TRx (+) of SPC-2010. - Connect Tx (–) of SRD-4XX with TRx (–) of SPC-2010.
M ` Not supported by SRD-480D.
Tx1 Tx2 Tx3 TRx
CH 1
CH 3
CH 2
CH 4
AUDIO IN
AUDIO OUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
SPOT
ALARM INALARM OUT
INAC 100-240~
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
Tx1 Tx2 Tx3 TRx
CH 2
CH 4
AUDIO IN
AUDIO OUT
VIDEOOUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
ALARM OUT
Tx1 Tx2 Tx3 TRx
CH 1
CH 3
CH 2
CH 4
AUDIO IN
AUDIO OUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
SPOT
ALARM INALARM OUT
INAC 100-240~
DC IN 12VTx1 Tx2 Tx3 TRx
PROGRAM
Tx1 Tx2 Tx3 TRx
CH 2
CH 4
AUDIO IN
AUDIO OUT
VIDEOOUT
VGA
CONSOLE
SERIAL
NETWORK
USB
VID
EO IN
LOO
P O
UT
ALARM OUT
SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124www.samsungcctvusa.com
SAMSUNG TECHWIN EUROPE LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPSTEL : +44-1932-45-5300 FAX : +44-1932-45-5325
www.samsungtechwin.comwww.samsungsecurity.com