system configuration(tx) - when p2p ethernet configuration select p2p multicast address when...
TRANSCRIPT
System Configuration(TX) - when P2P
Ethernet Configuration
Select P2P
Multicast address when Multicast
Peer address when P2P mode
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
System Configuration(TX) - when Multicast
Select Multicast
Enter Multicast address
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
System Configuration(RX) - when P2P
Select P2P
Select Peer IP
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
System Configuration(RX) - when Multicast
Select Multicast
Enter Multicast address
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
Streaming Control(TX)
Receiver’s Status
HDMI / DSUB / COMPONENT / HDSDI
HDMI / LINEIN / HDSDI
Click to restart transmitter
CBR setting : 0 – 12 Mbps
FPS setting : 1 ~ 85 0 – input fps
Info from ENC chip (debugging purpose only)
RTSP Server On/Off
Destination of Audio streamOn_RCVR / On_RTSP / Off
Activate the changes of Configuration
Click ‘Refresh’ to display current status
Streaming Control(TX)- When no RTSP Server mode
Select Off
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
Streaming Control(TX)- When RTSP Server mode
Select On
On_RCVR : audio is sending only to TVI ReceiverOn_RTSP : audio is sending only to RTSP clientsOff : audio is not sending to anywhere
Click ‘Refresh’ to display current status
Click ‘Submit’ to activate the changes of Configuration
Streaming Control(RX)
HDMI / COMPONENT / HDSDI
Click to restart receiver
C
Click ‘Submit’ to activate the changes of Configuration
Click ‘Refresh’ to display current status
Save Current Configurations
Click this button to save the changes of configuration
Reboot System
Click this button to reboot the Transmitter
RTSP client : in a VLC media player
5. Select <Media>– <Open Network Stream>
6. Enter TX RTSP stream IP, port number
Ex) rtsp://Tx IP:8554/stream
7. Click play button
1.TX Syetem: Multicas (227.2.2.7) or P2P (Peer IP )2 Tx Streaming: RTSP Server: on, Audio Streaming On_RTSP3. Save the changees4. Reboot
If your PC is not powerful, use the resolution 1280X720P and below
