Synthes EX Nail Instrument Sets. Set lists and graphic case configuration suggestions.

Adolescent Lateral Femoral Nail-EX

Lateral Femoral Nail-EX

Retrograde/Antegrade Femoral Nail-EX

Tibia-EX

Table of Contents

Sets

Graphic Cases

Auxiliary Bins

Set Configurations

Quick Reference 1

EX Nails Opening Instrument Set 4

ALFN Opening Instrument Set 6

LFN Opening Instrument Set 8

RAFN Opening Instrument Set 10

Tibia Opening Instrument Set 12

Reduction Instrument Sets 14

Reaming Instrument Set 18

ALFN Insertion Instrument Set 20

LFN Insertion Instrument Set 22

RAFN Insertion Instrument Set 24

Tibia Insertion Instrument Set 26

Tibia Insertion Set with Suprapatellar 28

RAFN Instrument Set 32

Graphic Cases 34

Auxiliary Bins 35

Set Configurations 36

EX Nail Instrument Sets Synthes

Set Quick Reference

2 Synthes EX Nail Instrument Sets

EX Nail Instrument Sets

Height

Full Weight with all Additionally Available Instruments (lbs.)

01.116.036 Opening All Complete Set 1.5 10.25

01.116.037 Opening ALFN Complete Set 1 5.25

01.116.038 Opening LFN Complete Set 1 6.65

01.116.039 Opening RAFN Complete Set 1 5.61

01.116.040 Opening Tibia Complete Set 1 5.17

01.116.041 Reduction with MIPO Complete Set 1.5 10.82

01.116.042 Reduction Complete Set 1.5 7.63

01.116.043 Reaming Complete Set 1 5.54

01.116.044 Insertion ALFN Complete Set 1.5 9.68

01.116.045 Insertion LFN Complete Set 1.5 10.79

01.116.046 Insertion RAFN Complete Set 1.5 12.00

01.116.047 Insertion Tibia Complete Set 3 11.65

01.116.048 Insertion Tibia with Suprapatellar Complete Set 4 19.85

01.116.049 Locking Complete Set 1.5 11.02

Set Quick Reference

EX Nail Instrument Sets Synthes 3

Graphic Cases and Auxiliary Trays

Height

Full Weight with all Additionally Available Instruments (lbs.)

60.037.001 Graphic Case, full length, 1 high (empty) 1.5 3.68

60.037.002 Graphic Case, full length, 2 high (empty) 1.5 4.30

60.037.003 Graphic Case, full length, 3 high (empty) 1.5 4.84

60.037.004 Graphic Case, full length, 4 high (empty) 3 5.28

60.116.151 Auxiliary tray, 1 high (empty) 1 2.90

60.116.152 Auxiliary tray, 2 high (empty) 2 5.54

EX Nails Opening Instrument Set (01.116.036)

Complete Set60.116.136 Opening Tray for EX Nails

60.116.156 Label Sheet for All EX Nail Opening Instrumentation

Instruments03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.021 Radiographic Ruler, for Titanium Cannulated Tibial Nails

03.010.028 15.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.029 17.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.034 13.0 mm Flexible Cannulated Drill Bit, 465 mm

03.010.036 12.0 mm Cannulated Drill Bit, large quick coupling, 190 mm

03.010.040 12.0 mm Cannulated Awl

03.010.041 14.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

03.010.500 Silicone Handle, with quick coupling

03.010.501 12.0 mm Protection Sleeve, for Expert Tibia Nail with quick coupling

03.010.502 13.0 mm Protection Sleeve, for RAFN Retrograde with quick coupling

03.010.503 13.0 mm Protection Sleeve, for RAFN Antegrade with quick coupling

03.010.504 13.0 mm Protection Sleeve, for Expert ALFN with quick coupling

03.010.505 17.0 mm Protection Sleeve, for Expert Lateral Entry Femoral Nail, with quick coupling

03.010.507 Multi Hole Wire Guide, for Expert Retrograde Femoral Nail

03.010.508 Multi Hole Wire Guide, for Expert Antegrade Femoral Nail

03.010.509 Multi Hole Wire Guide, for Expert Adolescent Lateral Entry Femoral Nail

03.010.510 Multi Hole Wire Guide, for Expert Lateral Entry Femoral Nail

351.27 13.0 mm Cannulated Drill Bit, 300 mm

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

4 Synthes EX Nail Instrument Sets

Additionally Available* 03.010.420 15.0 mm Percutaneous Cannulated Flexible

Drill Bit, large quick coupling, 390 mm

03.037.008 8 mm Cannulated Curved Awl

*Additionally available items are not included in sets

– Tray weight without additionally available items: 10.25 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights. If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

Existing Instruments03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.021 Radiographic Ruler, for Titanium Cannulated Tibial Nails

03.010.028 15.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.029 17.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.034 13.0 mm Flexible Cannulated Drill Bit, 465 mm

03.010.036 12.0 mm Cannulated Drill Bit, large quick coupling, 190 mm

03.010.040 12.0 mm Cannulated Awl

03.010.041 14.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

351.27 13.0 mm Cannulated Drill Bit, 300 mm

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

EX Nails Opening Instrument Upgrade Set (01.116.236)

New Instruments60.116.136 Opening Tray for EX Nails

60.116.156 Label Sheet for All EX Nail Opening Instrumentation

03.010.500 Silicone Handle, with quick coupling

03.010.501 12.0 mm Protection Sleeve, for Expert Tibia Nail with quick coupling

03.010.502 13.0 mm Protection Sleeve, for RAFN Retrograde with quick coupling

03.010.503 13.0 mm Protection Sleeve, for RAFN Antegrade with quick coupling

03.010.504 13.0 mm Protection Sleeve, for Expert ALFN with quick coupling

03.010.505 17.0 mm Protection Sleeve, for Expert Lateral Entry Femoral Nail, with quick coupling

03.010.507 Multi Hole Wire Guide, for Expert Retrograde Femoral Nail

03.010.508 Multi Hole Wire Guide, for Expert Antegrade Femoral Nail

03.010.509 Multi Hole Wire Guide, for Expert Adolescent Lateral Entry Femoral Nail

03.010.510 Multi Hole Wire Guide, for Expert Lateral Entry Femoral Nail

EX Nail Instrument Sets Synthes 5

Adolescent Lateral Femoral Nail-EX Opening Instrument Set (01.116.037)

Complete Set60.116.137 Opening Tray for ALFN-EX

60.116.157 Label Sheet for ALFN-EX Opening Instrumentation

Instruments03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.041 14.0 mm Cannulated Awl

03.010.500 Silicone Handle, with quick coupling

03.010.504 13 mm Protection Sleeve for ALFN

03.010.509 Multi Hole Wire Guide, for Expert Adolescent Lateral Entry Femoral Nail

351.27 13.0 mm Cannulated Drill Bit, 300 mm

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Additionally Available* 03.037.008 8 mm Cannulated Curved Awl

*Additionally available items are not included in sets

6 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 5.25 lbs.

– Tray height: 1 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Existing Instruments03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.041 14.0 mm Cannulated Awl

351.27 13.0 mm Cannulated Drill Bit, 300 mm

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Adolescent Lateral Femoral Nail–EX Opening Instrument Upgrade Set (01.116.237)

New Instruments60.116.137 Opening Tray for ALFN-EX

60.116.157 Label Sheet for ALFN-EX Opening Instrumentation

03.010.500 Silicone Handle, with quick coupling

03.010.504 13 mm Protection Sleeve for ALFN

03.010.509 Multi Hole Wire Guide, for Expert Adolescent Lateral Entry Femoral Nail

EX Nail Instrument Sets Synthes 7

Lateral Femoral Nail Recon–EX Opening Instrument Set (01.116.038)

Complete Set60.116.138 Opening Tray for LFN-EX

60.116.158 Label Sheet for LFN-EX Opening Instrumentation

Instruments 03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.028 15.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.029 17.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.041 14.0 mm Cannulated Awl

03.010.500 Silicone Handle, with quick coupling

03.010.505 17 mm Protection Sleeve for LFN

03.010.510 Multi Hole Wire Guide, for Expert Lateral Entry Femoral Nail

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Additionally Available* 03.010.420 15 mm Flexible Drill Bit

03.037.008 8 mm Cannulated Curved Awl

*Additionally available items are not included in sets

8 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 6.65 lbs.

– Tray height: 1 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Existing Instruments03.010.020 Radiographic Ruler, for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.028 15.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.029 17.0 mm Cannulated Drill Bit, large quick coupling, 280 mm

03.010.041 14.0 mm Cannulated Awl

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Lateral Femoral Nail Recon–EX Opening Instrument Upgrade Set (01.116.238)

New Instruments60.116.138 Opening Tray for LFN-EX

60.116.158 Label Sheet for LFN-EX Opening Instrumentation

03.010.500 Silicone Handle, with quick coupling

03.010.505 17 mm Protection Sleeve for LFN

03.010.510 Multi Hole Wire Guide, for Expert Lateral Entry Femoral Nail

EX Nail Instrument Sets Synthes 9

Retrograde/Antegrade Femoral Nail–EX Opening Instrument Set (01.116.039)

Complete Set60.116.139 Opening Tray for RAFN-EX

60.116.159 Label Sheet for RAFN – EX Opening Instrumentation

Instruments03.010.020 Radiographic Ruler for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.034 13.0 mm Flexible Cannulated Drill Bit, 465 mm

03.010.041 14.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

03.010.500 Silicone Handle, with quick coupling

03.010.502 13.0 mm Protection Sleeve, for RAFN Retrograde with quick coupling

03.010.503 13.0 mm Protection Sleeve, for RAFN Antegrade with quick coupling

03.010.507 Multi Hole Wire Guide, for Expert Retrograde Femoral Nail

03.010.508 Multi Hole Wire Guide, for Expert Antegrade Femoral Nail

351.27 13.0 mm Cannulated Drill Bit, 300 mm

Additionally Available*03.037.008 8 mm Cannulated Curved Awl

*Additionally available items are not included in sets

10 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 5.61 lbs.

– Tray height: 1 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Existing Instruments03.010.020 Radiographic Ruler for Titanium

Cannulated Femoral Nails

03.010.023 Radiographic Canal Width Estimator, for IM Nails

03.010.034 13.0 mm Flexible Cannulated Drill Bit, 465 mm

03.010.041 14.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

351.27 13.0 mm Cannulated Drill Bit, 300 mm

Retrograde/Antegrade Femoral Nail–EX Opening Instrument Upgrade Set (01.116.239)

New Instruments60.116.139 Opening Tray for RAFN-EX

60.116.159 Label Sheet for RAFN–EX Opening Instrumentation

03.010.500 Silicone Handle, with quick coupling

03.010.502 13.0 mm Protection Sleeve, for RAFN Retrograde with quick coupling

03.010.503 13.0 mm Protection Sleeve, for RAFN Antegrade with quick coupling

03.010.507 Multi Hole Wire Guide, for Expert Retrograde Femoral Nail

03.010.508 Multi Hole Wire Guide, for Expert Antegrade Femoral Nail

EX Nail Instrument Sets Synthes 11

Tibia–EX Opening Instrument Set (01.116.040)

Complete Set 60.116.140 Opening Tray for Tibia Nail-EX

60.116.160 Label Sheet for Tibia–EX Opening Instrumentation

Instruments03.010.021 Radiographic Ruler for Titanium

Cannulated Tibial Nails

03.010.036 12.0 mm Cannulated Drill Bit, large quick coupling, 190 mm

03.010.040 12.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

03.010.500 Silicone Handle, with quick coupling

03.010.501 12.0 mm Protection Sleeve, for Expert Tibia Nail with quick coupling

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Additionally Available*03.037.008 8 mm Cannulated Curved Awl

*Additionally available items are not included in set

12 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 5.17 lbs.

– Tray height: 1 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Tibia–EX Opening Instrument Set (01.116.040)

Existing Instruments03.010.021 Radiographic Ruler for Titanium

Cannulated Tibial Nails

03.010.036 12.0 mm Cannulated Drill Bit, large quick coupling, 190 mm

03.010.040 12.0 mm Cannulated Awl

03.010.115 3.2 mm Guide Wire, 290 mm, 10 ea.

357.399 3.2 mm Guide Wire, 400 mm, 10 ea.

Tibial Nail-EX Opening Instrument Upgrade Set (01.116.240)

New Instruments60.116.140 Opening Tray for Tibia Nail-EX

60.116.160 Label Sheet for Tibia–EX Opening Instrumentation

03.010.500 Silicone Handle, with quick coupling

03.010.501 12.0 mm Protection Sleeve, for Expert Tibia Nail with quick coupling

EX Nail Instrument Sets Synthes 13

Reduction Instrument Set with MIPO (01.116.041)

Complete Set60.116.141 Reduction Tray with MIPO Instrumentation60.116.162 Label Sheet for Reduction Instrumentation

Instruments03.010.495 Intramedullary Reduction Tool, curved,

with quick coupling03.010.496 T-Handle, cannulated, with quick coupling292.655 1.6 mm Guide Wire, 410 mm,

threaded tip, with trocar, 4 ea.294.788 5.0 mm Self-Drilling Schanz Screw, 80 mm

thread length, 250 mm, 2 ea.310.37 3.5 mm Drill Bit quick coupling, 195 mm321.16 Combination Wrench, 11 mm width

across flats328.020 Reduction Handle, toothed,

for 5.0 mm Threaded Rod, 2 ea.328.100 11.0 mm Protection Sleeve, slotted328.120 5.0 mm-1.6 mm Wire Guide 328.130 11.0 mm/5.0 mm Drill Sleeve 328.140 Cannulated Tap for 5.0 mm Threaded Rod,

195 mm328.150 Adjusting Nut, for 5.0 mm Threaded Rod,

2 ea.328.160 5.0 mm Threaded Rod, 380 mm,

self-drilling tip, 2 ea.328.170 5.0 mm Cannulated Threaded Rod,

335 mm, blunt tip, 1.6 mm cannulation, 2 ea.

359.212 Large F-Tool 360.251 7.5 mm Intramedullary Reduction Tool,

460 mm 390.005 Large Combination Clamp, 2 ea.393.10 Universal Chuck with T-Handle, 2 ea.394.86 11.0 mm Carbon Fiber Rod, 350 mm398.54 Straight Ball Spike, 337 mm

14 Synthes EX Nail Instrument Sets

Additionally Available*294.57 5.0 mm Schanz Screw, 250 mm, blunted

trocar point, 2 ea.

328.150 Adjusting Nut, 2 ea.

394.87 11.0 mm Carbon Fiber Rod, 400 mm

398.71 Spiked Disk, 2 ea.

*Additionally available items are not included in sets

– Tray weight without additionally available items: 10.82 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights. If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

Reduction Instrument Set with MIPO (01.116.041)

Existing Instruments292.655 1.6 mm Guide Wire, 410 mm,

threaded tip, with trocar, 4 ea.294.788 5.0 mm Self-Drilling Schanz Screw, 80 mm

thread length, 250 mm, 2 ea.310.37 3.5 mm Drill Bit quick coupling, 195 mm321.16 Combination Wrench, 11 mm width

across flats328.020 Reduction Handle, toothed,

for 5.0 mm Threaded Rod, 2 ea.328.100 11.0 mm Protection Sleeve, slotted328.120 5.0 mm-1.6 mm Wire Guide 328.130 11.0 mm/5.0 mm Drill Sleeve 328.140 Cannulated Tap for 5.0 mm Threaded Rod,

195 mm328.150 Adjusting Nut, for 5.0 mm Threaded Rod,

2 ea.328.160 5.0 mm Threaded Rod, 380 mm,

self-drilling tip, 2 ea.328.170 5.0 mm Cannulated Threaded Rod,

335 mm, blunt tip, 1.6 mm cannulation, 2 ea.

359.212 Large F-Tool 360.251 7.5 mm Intramedullary Reduction Tool,

460 mm 390.005 Large Combination Clamp, 2 ea.393.10 Universal Chuck with T-Handle, 2 ea.394.86 11.0 mm Carbon Fiber Rod, 350 mm

Reduction Instrument Set with MIPO Upgrade Set (01.116.241)

New Instruments60.116.141 Reduction Tray with MIPO Instrumentation

60.116.162 Label Sheet for Reduction Instrumentation

03.010.495 Intramedullary Reduction Tool, curved, with quick coupling

03.010.496 T-Handle, cannulated, with quick coupling

398.54 Straight Ball Spike, 337 mm

EX Nail Instrument Sets Synthes 15

Reduction Instrument Set (01.116.042)

Complete Set60.116.142 Reduction Tray60.116.162 Label Sheet for Reduction Instrumentation

Instruments03.010.495 Intramedullary Reduction Tool, curved,

with quick coupling03.010.496 T-Handle, cannulated, with quick coupling294.788 5.0 mm Self-Drilling Schanz Screws,

250 mm, 2 ea.359.212 Large F-Tool360.251 7.5 mm IM Reduction Tool393.10 Universal Chuck with T-handle, 2 ea.398.54 Straight Ball Spike, 337 mm length

Additionally Available*294.57 5.0 mm Self-Drilling Schanz Screws, 250 mm,

2 ea.

398.71 Spiked Disk, 2 ea.

*Additionally available items are not included in sets

16 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 7.63 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights. If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

Reduction Instrument Set (01.116.042)

Existing Instruments294.788 5.0 mm Self-Drilling Schanz Screws,

250 mm, 2 ea.

359.212 Large F-Tool

360.251 7.5 mm IM Reduction Tool

393.10 Universal Chuck with T-handle, 2 ea.

Reduction Instrument Upgrade Set (01.116.242)

New Instruments60.116.142 Reduction Tray

60.116.162 Label Sheet for Reduction Instrumentation03.010.495 Intramedullary Reduction Tool, curved,

with quick coupling03.010.496 T-Handle, cannulated, with quick coupling

398.54 Straight Ball Spike, 337 mm

EX Nail Instrument Sets Synthes 17

Reaming Instrument Set (01.116.043)

Complete Set60.116.143 Reaming Tray

60.116.163 Label Sheet for Reaming Instrumentation

690.382.40 Reamer Head Tray, Flexible Reamers for IM Nails

Instruments03.010.093 Reaming Rod Push Rod, with Ball Handle

351.05 Tissue Protector

351.15 Flexible Shaft Handle quick coupling, cannulated

351.16J Flexible Shaft Connector, for Jacobs chuck

351.717 Depth Gauge

351.719 Extension Tube for Depth Gauge

351.783 Removal Tool, for use with Medullary Reaming Heads

352.040 5.0 mm Flexible Shaft, 470 mm, 2 ea.

352.050 7.0 mm Head, straight

352.055 7.0 mm Head, angled

393.10 Universal Chuck with T-Handle

18 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 5.54 lbs.

– Tray height: 1 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Reaming Instrument Set (01.116.043)

EX Nail Instrument Sets Synthes 19

Length (mm)

352.140 14.0

352.145 14.5

352.150 15.0

352.155 15.5

352.160 16.0

352.165 16.5

352.170 17.0

352.175 17.5

352.180 18.0

352.185 18.5

352.190 19.0

Medullary Reamer Heads Length (mm)

352.085 8.5

352.090 9.0

352.095 9.5

352.100 10.0

352.105 10.5

352.110 11.0

352.115 11.5

352.120 12.0

352.125 12.5

352.130 13.0

352.135 13.5

20 Synthes EX Nail Instrument Sets

Adolescent Lateral Femoral Nail– EX Insertion Instrument Set (01.116.044)

Complete Set60.116.144 Insertion Tray, for ALFN-EX

60.116.164 Label Sheet for ALFN–EX Insertion Instrumentation

Instruments03.010.060 3.2 mm Three-Fluted Drill Bit,

330 mm/100 mm calibration, 2 ea.

03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.075 11.5 mm/8.5 mm Protection Sleeve for Recon Locking, 2 ea.

03.010.076 8.5 mm/3.2 mm Wire Guide for Recon Locking, 2 ea.

03.010.077 3.2 mm Trocar for Recon Locking, 2 ea.

03.010.079 Drill Stop for 4.5 mm/6.5 mm Stepped Drill Bit

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.146 Cannulated Connection Screw, for 100 mm Insertion Handle, 2 ea.

03.010.228 Drill Bit for 5.0 mm Recon Screws, large quick coupling, 2 ea.

03.010.483 Radiolucent Recon Aiming Arm for ALFN

03.010.488 Radiolucent Insertion Handle, for ALFN-EX, 100 mm

03.010.493 Direct Measuring Device, for Recon Screws to 400 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

357.399 3.2 mm Guide Wire, 400 mm, 3 ea.

Additionally Available* 03.010.100 3.2 mm Three-Fluted Drill Bit, needle point,

for use with Radiolucent Drive, 145 mm, 2 ea.

*Additionally available items are not included in sets

– Tray weight without additionally available items: 9.68 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights. If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

Adolescent Lateral Femoral Nail–EX Insertion Instrument Set (01.116.044)

EX Nail Instrument Sets Synthes 21

Existing Instruments03.010.060 3.2 mm Three-Fluted Drill Bit,

330 mm/100 mm calibration, 2 ea.

03.010.063 12.0 mm/ 8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm / 4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.075 11.5 mm / 8.5 mm Protection Sleeve for Recon Locking, 2 ea.

03.010.076 8.5 mm / 3.2 mm Wire Guide for Recon Locking, 2 ea.

03.010.077 3.2 mm Trocar for Recon Locking, 2 ea.

03.010.079 Drill Stop for 4.5 mm/ 6.5 mm Stepped Drill Bit

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

03.010.228 Drill Bit for 5.0 mm Recon Screws, large quick coupling, 2 ea.

357.399 3.2 mm Guide Wire, 400 mm, 3 ea.

Adolescent Lateral Femoral Nail-EX Insertion Instrument Upgrade Set (01.116.244)

New Instruments60.116.144 Insertion Tray, for ALFN-EX

60.116.164 Label Sheet for ALFN-EX Insertion Instrumentation

03.010.483 Radiolucent Recon Aiming Arm for ALFN

03.010.488 Radiolucent ALFN Insertion Handle, for ALFN-EX, 100 mm

03.010.493 Direct Measuring Device, for Recon Screws to 400 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

Lateral Femoral Nail Recon – EX Insertion Instrument Set (01.116.045)

Complete Set60.116.145 Insertion Tray for Lateral Femoral Nail-EX

60.116.165 Label Sheet for LFN-EX insertion instumentation

Instruments03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,

330 mm, 100 mm calibration, 2 ea.

03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/ 8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.065 8.0 mm/ 4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.071 5.0 mm Trocar, 210 mm, 2 ea.

03.010.075 11.5 mm/ 8.5 mm Protection Sleeve, for Recon Locking, 2 ea.

03.010.076 8.5 mm/3.2 mm Wire Guide, for Recon Locking, 2 ea.

03.010.077 3.2 mm Trocar for Recon Locking, 2 ea.

03.010.078 4.5 mm / 6.5 mm Stepped Drill Bit, large quick coupling, 485 mm

03.010.079 Drill Stop for 4.5 mm/6.5 mm Stepped Drill Bit

03.010.080 Tap for 6.5 mm Recon Screws, 485 mm

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

03.010.482 Radiolucent Recon Aiming Arm for LFN

03.010.486 Radiolucent Insertion Handle, for Expert Nails, 100 mm

03.010.493 Direct Measuring Device, for Recon Screws to 400 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

357.399 3.2 mm Guide Wire, 400 mm, 3 ea.

22 Synthes EX Nail Instrument Sets

Additionally Available*03.010.101 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.03.010.102 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.03.010.487 Radiolucent Insertion Handle, Percutaneous03.010.499 Cannulated Connection Screw for Percutaneous Insertion Handle, 2 ea.

*Additionally available items are not included in sets

– Tray weight without additionally available items: 10.79 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be

ordered separately.

Lateral Femoral Nail Recon – EX Insertion Instrument Set (01.116.045)

Existing Instruments03.010.061 4.2 mm Three-Fluted Drill Bit, quick

coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.071 5.0 mm Trocar, 210 mm, 2 ea.

03.010.075 11.5 mm/ 8.5 mm Protection Sleeve, for Recon Locking, 2 ea.

03.010.076 8.5 mm/3.2 mm Wire Guide, for Recon Locking, 2 ea.

03.010.077 3.2 mm Trocar for Recon Locking, 2 ea.

03.010.078 4.5 mm/6.5 mm Stepped Drill Bit, large quick coupling, 485 mm

03.010.079 Drill Stop for 4.5 mm/6.5 mm Stepped Drill Bit

03.010.080 Tap for 6.5 mm Recon Screws, 485 mm

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

357.399 3.2 mm Guide Wire, 400 mm, 3 ea.

EX Nail Instrument Sets Synthes 23

Lateral Femoral Nail Recon – EX Insertion Instrument Upgrade Set (01.116.245)

New Instruments60.116.145 Insertion Tray for Lateral Femoral Nail-EX

60.116.165 Label Sheet for LFN-EX insertion instumentation

03.010.482 Radiolucent Recon Aiming Arm for LFN

03.010.486 Radiolucent Insertion Handle, for Expert Nails, 100 mm

03.010.493 Direct Measuring Device, for Recon Screws to 400 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

Retrograde/Antegrade Femoral Nail-EX Insertion Instrument Set (01.116.046)

Complete Set60.116.146 Insertion Tray for Retrograde/Antegrade

Femoral Nail-EX

60.116.166 Label Sheet for RAFN–EX Insertion Instrumentation

Instruments03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,

330 mm, 100 mm calibration, 2 ea.

03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.071 5.0 mm Trocar, 210 mm, 2 ea.

03.010.081 15.0 mm/13.0 mm Protection Sleeve for Spiral Blade Aiming Arm

03.010.082 13.0 mm/3.2 mm Wire Guide for Spiral Blade Aiming Arm

03.010.084 Spiral Blade Inserter, for Retrograde Femoral Nails–EX

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.115 3.2 mm Guide Wire, 290 mm, 3 ea.

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

03.010.480 Radiolucent Aiming Arm for RAFN Antegrade Standard Locking

03.010.481 Radiolucent Aiming Arm for RAFN Retrograde Standard Locking

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.489 Aiming Arm, for Retrograde Spiral Blade Locking

03.010.492 Spiral Blade Measuring Device, for Retrograde Femoral Nail–EX

24 Synthes EX Nail Instrument Sets

Additionally Available*03.010.101 4.2 mm Three-Fluted Drill Bit, quick

coupling, needle point, 145 mm, 2 ea.

03.010.102 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.487 Radiolucent Insertion Handle, Percutaneous

03.010.499 Cannulated Connection Screw for Percutaneous Insertion Handle, 2 ea.

*Additionally available items are not included in sets

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

357.34 Connecting Screw, for Titanium Spiral Blades

357.36 Extraction Screw

– Tray weight without additionally available items: 12 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

Retrograde/Antegrade Femoral Nail-EX Insertion Instrument Set (01.116.046)

Existing Instruments03.010.061 4.2 mm Three-Fluted Drill Bit, quick

coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.071 5.0 mm Trocar, 210 mm, 2 ea.

03.010.081 15.0 mm / 13.0 mm Protection Sleeve for Spiral Blade Aiming Arm

03.010.082 13.0 mm / 3.2 mm Wire Guide for Spiral Blade Aiming Arm

03.010.084 Spiral Blade Inserter for Retrograde Femoral Nails – EX

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.115 3.2 mm Guide Wire, 290 mm, 3 ea.

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

357.34 Connecting Screw for Inserter for Titanium Spiral Blades

357.36 Extraction Screw

EX Nail Instrument Sets Synthes 25

Retrograde/Antegrade Femoral Nail-EX Insertion Instrument Upgrade Set (01.116.246)

New Instruments60.116.146 Insertion Tray for Retrograde/Antegrade

Femoral Nail-EX

60.116.166 Label Sheet for RAFN–EX Insertion Instrumentation

03.010.480 Radiolucent Aiming Arm for RAFN Antegrade Standard Locking

03.010.481 Radiolucent Aiming Arm for RAFN Retrograde Standard Locking

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.489 Aiming Arm, for Retrograde Spiral Blade Locking

03.010.492 Spiral Blade Measuring Device, for Retrograde Femoral Nail– EX

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

Tibia –EX Insertion Instrument Set (01.116.047)

Complete Set60.116.147 Insertion Tray for Tibia Nail–EX

60.116.167 Label Sheet for Tibia–EX Insertion Instrumentation

Instruments03.010.052 Aiming Arm for EX Tibial Nails

03.010.060 3.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm, 8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm, 3.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.065 8.0 mm, 4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.137 Long Compression Device

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

Additionally Available*03.010.004 Compression Device for Titanium Cannulated

Tibial Nails –EX, 2 ea.

03.010.095 Cannulated Connection Screw for Short Insertion Handle, 2 ea.

03.010.100 3.2 mm Radiolucent Drill Bit, 2 ea.

03.010.101 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point,145 mm, 2 ea.

03.010.137 Long Compression Device

03.010.485 Radiolucent Short Insertion Handle, 23 mm

*Additionally available items are not included in sets

26 Synthes EX Nail Instrument Sets

– Tray weight without additionally available items: 11.65 lbs.

– Tray height: 3 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

Tibia –EX Insertion Instrument Set (01.116.047)

Existing Instruments03.010.052 Aiming Arm for EX Tibial Nails

03.010.060 3.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm, 8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm, 3.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.065 8.0 mm, 4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.137 Long Compression Device

03.010.146 Cannulated Connection Screw for 100 mm Insertion Handle, 2 ea.

Tibia–EX Insertion Instrument Upgrade Set (01.116.247)

New Instruments60.116.147 Insertion Tibia Tray

60.116.167 Label Sheet for Tibia –EX Insertion Instrumentation

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

EX Nail Instrument Sets Synthes 27

Tibia– EX Insertion Instrument Set with Suprapatellar (01.116.048)

Complete Set60.116.148 Insertion Tray for Tibia Nail-EX with

Suprapatellar Instruments

60.116.168 Label Sheet for Tibia Nail-EX with Suprapatellar Insertion Instrumentation

Instruments03.010.060 3.2 mm Three-Fluted Drill Bit, quick

coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm/3.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.137 Long Compression Device, for Titanium Cannulated Tibial Nails-EX

03.010.146 Cannulated Connection Screw, for 100 mm Insertion Handle, 2 ea.

03.010.404 Cannulated Connecting Screw, for Percutaneous Instruments for Nails-EX

03.010.430 Handle for Protection Sleeves, for Suprapatellar

03.010.433 12.0 mm/3.2 mm Wire Guide, 2 holes, for Suprapatellar

03.010.434 14.5 mm/3.2 mm Wire Guide, 2 holes,

for Suprapatellar

03.010.435 12.0 mm Protection Sleeve, for 8–11 mm nails

03.010.436 14.5 mm Protection Sleeve, for 12–13 mm nails

03.010.439 12 mm Cannulated Drill, 270 mm, with large quick coupling

03.010.440 Insertion Handle for Suprapatellar

03.010.441 Aiming Arm for EX Tibia Nails

03.010.442 12.0 mm/8.0 mm Protection Sleeve with flats for Suprapatellar

03.010.443 Compression Device for Suprapatellar

03.010.444 8 mm Hex Screwdriver Cannulated, Inter-Lock

03.010.445 T40 StarDrive Screwdriver, long, Inter-Lock

03.010.446 Extraction Screw, M8, for Suprapatellar

03.010.447 T40 StarDrive Screwdriver, long, cannulated

03.010.455 12.0 mm Trocar, PEEK, for Suprapatellar

03.010.456 14.5 mm Trocar, PEEK, for Suprapatellar

03.010.475 Driving Cap

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

Additionally Available*03.010.004 Compression Device for Titanium

Cannulated Tibial Nails–EX, 2 ea.

03.010.095 Cannulated Connection Screw for Short Insertion Handle, 2 ea.

03.010.100 3.2 mm Radiolucent Drill Bit, 2 ea.

03.010.101 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.137 Compression Device for Titanium Cannulated Tibial Nails–EX

03.010.485 Radiolucent Short Insertion Handle, 23 mm

28 Synthes EX Nail Instrument Sets

*Additionally available items are not included in sets

Tibia–EX Insertion Instrument Set with Suprapatellar (01.116.048)

EX Nail Instrument Sets Synthes 29

– Tray weight without additionally available items: 19.68 lbs.

– Tray height: 4 high

– Graphic Cases are available in 1, 2, 3, and 4 heights.

– Set does not include Graphic Case, which must be ordered separately.

30 Synthes EX Nail Instrument Sets

Existing Instruments03.010.060 3.2 mm Three-Fluted Drill Bit, quick

coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.

03.010.063 12.0 mm/ 8.0 mm Protection Sleeve, 188 mm, 2 ea.

03.010.064 8.0 mm/ 3.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.065 8.0 mm/ 4.2 mm Drill Sleeve, 200 mm, 2 ea.

03.010.069 3.2 mm Trocar, 2 ea.

03.010.070 4.2 mm Trocar, 210 mm, 2 ea.

03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm, 2 ea.

03.010.137 Long Compression Device, for Titanium Cannulated Tibial Nails – EX

03.010.146 Cannulated Connection Screw, for 100 mm Insertion Handle, 2 ea.

03.010.404 Cannulated Connecting Screw, for Percutaneous Instruments for Nails–EX

03.010.430 Handle for Protection Sleeves, for Suprapatellar

03.010.433 12.0 mm / 3.2 mm Wire Guide, 2 holes, for Suprapatellar

03.010.434 14.5 mm / 3.2 mm Wire Guide, 2 holes, for Suprapatellar

03.010.435 12.0 mm Protection Sleeve, for 8 –11 mm nails

03.010.436 14.5 mm Protection Sleeve,

for 12 –13 mm nails

03.010.439 12 mm Cannulated Drill, 270 mm, with large quick coupling

03.010.440 Insertion Handle for Suprapatellar

03.010.441 Aiming Arm for EX Tibia Nails

03.010.442 12.0 mm / 8.0 mm Protection Sleeve with flats for Suprapatellar

03.010.443 Compression Device for Suprapatellar

03.010.444 8 mm Hex Screwdriver Cannulated, Inter-Lock

03.010.445 T40 StarDrive Screwdriver, long, Inter-Lock

03.010.446 Extraction Screw, M8, for Suprapatellar

03.010.447 T40 StarDrive Screwdriver, long, cannulated

03.010.455 12.0 mm Trocar, PEEK, for Suprapatellar

03.010.456 14.5 mm Trocar, PEEK, for Suprapatellar

03.010.475 Driving Cap

Tibia –EX Insertion Instrument Set with Suprapatellar (01.116.048)

EX Nail Instrument Sets Synthes 31

Tibia–EX Insertion Instrument Set with Suprapatellar (01.116.048)

Existing Instruments

Tibia–EX Insertion Instrument Upgrade Set with Suprapatellar (01.116.248)

New Instruments60.116.148 Insertion Tray for Tibia Nail-EX with

Suprapatellar Instruments

60.116.168 Label Sheet for Tibia Nail-EX with Suprapatellar Insertion Instrumentation

03.010.486 Radiolucent Insertion Handle, for expert nails, 100 mm

03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

03.010.523 Driving Cap, threaded

EX Nails Locking Instrument Set (01.116.049)

Complete Set60.116.149 Locking Tray for EX Nails

60.116.169 Label Sheet for All EX–Nail Locking Instrumentation

Instruments03.010.151 Star/HexDrive Screwdriver Shaft T25, 3.5 mm

Hexagonal, self-retaining, quick coupling, 165 mm

03.010.152 Star/HexDrive Screwdriver Shaft T25, 3.5 mm Hexagonal, self-retaining, quick coupling, 280 mm

03.010.170 Hammer Guide

03.010.428 Depth Gauge for Locking Screws to 100 mm, for intermedullary nails

03.010.429 Direct Measuring Device for Locking Screws to 100 mm, for intermedullary nails

03.010.491 Long Scalpel Handle

03.010.494 Depth Gauge, for Locking Screws to 100 mm

03.010.513 Screwdriver, self retaining, T25, 250 mm

03.010.516 Handle, large, with quick coupling

03.010.518 Screwdriver, self retaining, T25, 320 mm

03.010.519 Screwdriver, self retaining, T25, 440 mm

03.010.520 Screwdriver, T40, 277 mm

03.010.522 Spiral Combination Hammer, 500 grams

03.900.044 T40 StarDrive Screwdriver Shaft, 100 mm

321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.

321.20 Ratchet Wrench, 11 mm width across flats

357.133 Extraction Screw, for Titanium Femoral and Tibial Nails

357.398 Cannulated Shaft with 8 mm hex, 125 mm

32 Synthes EX Nail Instrument Sets

Additionally Available*03.010.151 Star/Hex Screwdriver Shaft, 165 mm

03.010.152 Star/Hex Screwdriver Shaft, 280 mm

03.010.072 Depth Gauge for Locking Screws to 100 mm, for IM Nails

03.010.106 Direct Measuring Device, for Locking Screws to 100 mm

03.010.472 Inter-lock Screwdriver, T25 StarDrive/3.5 mm Hexagonal, 330 mm

03.010.473 Inter-lock Screwdriver, T25 StarDrive/3.5 mm Hexagonal, 224 mm

03.010.515 Screwdriver, Inter-Lock, T40, 377 mm

03.900.044 T40 StarDrive Screwdriver Shaft

*Additionally available items are not included in sets

– Tray weight without additionally available items: 11.02 lbs.

– Tray height: 1.5 high

– Graphic Cases are available in 1, 2, 3, and 4 heights. If tray is to be stored separately, lifting posts (60.116.170) must be ordered.

– Set does not include Graphic Case, which must be ordered separately.

EX Nails Locking Instrument Set (01.116.049)

Existing Instruments03.010.151 Star/HexDrive Screwdriver Shaft T25, 3.5 mm

Hexagonal, self-retaining, quick coupling, 165 mm

03.010.152 Star/HexDrive Screwdriver Shaft T25, 3.5 mm Hexagonal, self-retaining, quick coupling, 280 mm

03.900.044 T40 StarDrive Screwdriver Shaft, 100 mm

321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.

321.20 Ratchet Wrench, 11 mm width across flats

357.133 Extraction Screw, for Titanium Femoral and Tibial Nails

357.398 Cannulated Shaft with 8 mm hex, 125 mm

EX Nails Locking Instrument Upgrade Set (01.116.249)

New Instruments60.116.149 Locking Tray for EX Nails

60.116.169 Label Sheet for All EX–Nail Locking Instrumentation

03.010.170 Hammer Guide

03.010.428 Depth Gauge for Locking Screws to 100 mm, for intermedullary nails

03.010.429 Direct Measuring Device for Locking Screws to 100 mm, for intermedullary nails

03.010.491 Long Scalpel Handle

03.010.494 Depth Gauge, for Locking Screws to 100 mm

03.010.513 Screwdriver, self retaining, T25, 250 mm

03.010.516 Handle, large, with quick coupling

03.010.518 Screwdriver, self retaining, T25, 320 mm

03.010.519 Screwdriver, self retaining, T25, 440 mm

03.010.520 Screwdriver, T40, 277 mm

03.010.522 Spiral Combination Hammer, 500 grams

EX Nail Instrument Sets Synthes 33

34 Synthes EX Nail Instrument Sets

Graphic Cases

60.037.001 Graphic Case, full length, 1 high

Weight empty: 3.68 lbs.

60.037.002 Graphic Case, full length, 2 high

Weight empty: 4.3 lbs.

60.037.003 Graphic Case, full length, 3 high

Weight empty: 4.84 lbs.

60.037.004 Graphic Case, full length, 4 high

Weight empty: 5.28 lbs.

Some graphic case trays are available in 1 and 1.5 heights.

If stacked together, totaling an odd level, lifting posts should be added to the graphic case.

Example: 1 high tray + 1.5 high tray + lifting posts =3 high graphic case

60.116.170 Lifting Posts, 8 pack

Weight of 8 lifting posts: 0.24 lbs.

EX Nail Instrument Sets Synthes 35

Auxiliary Trays

Auxiliary Trays 60.116.151 Auxiliary Tray, full length, 1 high

Weight with finger mat only: 2.9 lbs.

60.116.173 Auxiliary Tray Divider, 1 high, 6 pack

60.116.174 Auxiliary Tray Divider, 1 high, 12 pack

60.116.152 Auxiliary Tray, full length, 2 high

Weight with finger mat only: 3.7 lbs.

60.116.183 Auxiliary Tray Divider, 2 high, 6 pack

60.116.184 Auxiliary Tray Divider, 2 high, 12 pack

690.917 Finger Mat

60.116.169 Label Sheet for All EX Nail Instruments

60.116.085 Blank Label Sheet

Set Configuration Suggestions

36 Synthes EX Nail Instrument Sets

ALFN Set

Total Weight: 20.01 lbs. (Case 1) 15.56 lbs. (Case 2)

Opening Instrumentation for ALFN1 High(01.116.037 Complete Set or 01.116.237 Upgrade Set)

Insertion Instrumentation for ALFN1.5 High(01.116.044 Complete Set or 01.116.244 Upgrade Set)

3 High Graphic Case* (60.037.003)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

2 High Graphic Case* (60.037.002)

*Lifting Posts-8 pack (60.116.170)

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 37

ALFN Set

Total Weight: 31.35 lbs.

Opening Instrumentation for ALFN1 High(01.116.037 Complete Set or 01.116.237 Upgrade Set)

Insertion Instrumentation for ALFN1.5 High(01.116.044 Complete Set or 01.116.244 Upgrade Set)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

4 High Graphic Case (60.037.004)

Set Configuration Suggestions

38 Synthes EX Nail Instrument Sets

LFN SetTotal Weight: 22.52 lbs. (Case 1) 15.56 lbs. (Case 2)

Opening Instrumentation for LFN1 High(01.116.038 Complete Set or 01.116.238 Upgrade Set)

Insertion Instrumentation for LFN1.5 High(01.116.045 Complete Set or 01.116.245 Upgrade Set)

3 High Graphic Case* (60.037.003)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

2 High Graphic Case* (60.037.002)

*Lifting Posts, 8 pack (60.116.170)

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 39

LFN SetTotal Weight: 33.74 lbs.

Opening Instrumentation for LFN1 High(01.116.038 Complete Set or 01.116.238 Upgrade Set)

Insertion Instrumentation for LFN1.5 High(01.116.045 Complete Set or 01.116.245 Upgrade Set)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

4 High Graphic Case (60.037.004)

Set Configuration Suggestions

40 Synthes EX Nail Instrument Sets

RAFN Set

Total Weight: 22.69 lbs. (Case 1) 15.56 lbs. (Case 2)

Opening Instrumentation for RAFN1 High(01.116.039 Complete Set or 01.116.239 Upgrade Set)

Insertion Instrumentation for RAFN1.5 High(01.116.046 Complete Set or 01.116.246 Upgrade Set)

3 High Graphic Case* (60.037.003)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

2 High Graphic Case* (60.037.002)

*Lifting Posts, 8 pack (60.116.170)

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 41

RAFN Set

Total Weight: 34.03 lbs.

Opening Instrumentation for RAFN1 High(01.116.039 Complete Set or 01.116.239 Upgrade Set)

Insertion Instrumentation for RAFN1.5 High(01.116.046 Complete Set or 01.116.246 Upgrade Set)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

4 High Graphic Case (60.037.004)

Set Configuration Suggestions

42 Synthes EX Nail Instrument Sets

Tibia Set

Total Weight: 22.22 lbs. (Case 1) 15.56 lbs. (Case 2)

Opening Instrumentation for Tibia1 High(01.116.040 Complete Set or 01.116.240 Upgrade Set)

Insertion Instrumentation for Tibia3 High(01.116.047 Complete Set or 01.116.247 Upgrade Set)

4 High Graphic Case (60.037.004)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

2 High Graphic Case* (60.037.002)

*Lifting Posts, 8 pack (60.116.170)

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 43

Tibia Set–continued

Set Configuration Suggestions

44 Synthes EX Nail Instrument Sets

Tibia Set with Suprapatellar Instruments

Total Weight: 21.27 lbs. (Case 1) 19.85 lbs. (Case 2)

Opening Instrumentation for Tibia1 High(01.116.040 Complete Set or 01.116.240 Upgrade Set)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

3 High Graphic Case* (60.037.003)

Insertion Instrumentation for Tibia with Suprapatellar Instruments4 High(01.116.048 Complete Set or 01.116.248 Upgrade Set)

4 High Graphic Case (60.037.004)

*Lifting Posts, 8 pack (60.116.170)

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 45

Tibia Set with Suprapatellar Instruments

Set Configuration Suggestions

46 Synthes EX Nail Instrument Sets

Universal EX Nail Instrument Set

Total Weight: 26.11 lbs.

Opening Instrumentation for All EX Nails1.5 High(01.116.036 Complete Set or 01.116.236 Upgrade Set)

Locking Instrumentation for All EX Nails1.5 High(01.116.049 Complete Set or 01.116.249 Upgrade Set)

3 High Graphic Case (60.037.003)

To insert a nail, the nail specific insertion tray is required.

Set Configuration Suggestions

EX Nail Instrument Sets Synthes 47

Opening/Reaming Instrument Set

Total Weight: 20.87 lbs.

Opening Instrumentation for All EX Nails1.5 High(01.116.036 Complete Set or 01.116.236 Upgrade Set)

Reaming Instrumentation for All EX Nails1 High(01.116.043 Complete Set or 01.116.243 Upgrade Set)

3 High Graphic Case* (60.037.003)

*Lifting Posts, 8 pack (60.116.170)

To insert a nail, the nail specific insertion tray is required. To lock a nail, the locking tray is required.

Set Configuration Suggestions

48 Synthes EX Nail Instrument Sets

Reduction/Reaming Instrument Set

Total Weight: 21.44 lbs.

Reduction Instrumentation 1.5 High(01.116.041 Complete Set or 01.116.241 Upgrade Set)

Reaming Instrumentation for All EX Nails1 High(01.116.043 Complete Set or 01.116.243 Upgrade Set)

3 High Graphic Case (60.037.003)*

*Lifting Posts, 8 pack (60.116.170)

To insert a nail, the nail specific insertion tray is required.

Synthes USA 1302 Wrights Lane East West Chester, PA 19380 Telephone: (610) 719-5000 To order: (800) 523-0322 Fax: (610) 251-9056

Synthes (Canada) Ltd. 2566 Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 To order: (800) 668-1119 Fax: (905) 567-3185

© 2013 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 5/13 J12250-A

www.synthes.com