sx-up2 installation for windows xp in this guide you will be instructed on how to install the sx-...
TRANSCRIPT
SX-UP2 installation for Windows XP
In this guide you will be instructed on how to install the SX-UP2 cable in combination with the Roland EGX-
20
Lode PLessersRoland DG
- Plug in the cable.
After the cable is plugged in , the following messages will appear.
Lode PLessersRoland DG
Lode PlessersRoland DG
Lode PlessersRoland DG
Lode PlessersRoland DG
- EGX-20 driver installation.
The following steps will show you how to install the EGX-20 driver on the correct communication port.
Lode PLessersRoland DG
Lode PlessersRoland DG
Open the “Printer and Faxes” menu
Lode PlessersRoland DG
Add a printer
Lode PlessersRoland DG
Click “Next”
Lode PlessersRoland DG
Click “Next”
Local printer attached to the computer
Lode PlessersRoland DG
Choose the highest USB Port number. Then click Next.
Lode PlessersRoland DG
Click the “Have Disk…” button
Lode PlessersRoland DG
Click the “Browse…” button.Browse to the drivers folder on your CD and select the correct folder for your windows
operation system.
Click “OK”
Lode PlessersRoland DG
Select the Roland EGX-20
Click “Next”
Lode PlessersRoland DG
Click “Next”
Replace existing driver
Lode PlessersRoland DG
Click “Next”
Lode PlessersRoland DG
Choose NO
Click “Next”
Lode PlessersRoland DG
Click “Finish”
Lode PlessersRoland DG
Choose “Continue Anyway”
Lode PlessersRoland DG
The files will be copied to your computer.
Lode PlessersRoland DG
The Roland EGX-20 is added to your printers and can be used
with the SX-UP2 Cable.
Lode PlessersRoland DG
Don’t hesitate to contact us if you need help.
Roland [email protected]
+32 14 57 59 11