swr balustrade brochure 2015
DESCRIPTION
Our comprehensive brochure has details of all the components we stock, simply select the components you need to build your bespoke solution.TRANSCRIPT
STAINLESS STEEL BALUSTRADE SYSTEM
www.swr-balustrade.co.uk
18
21
CONTENTS
3 SWR BALUSTRADE
3 Contact Us 3 Service The SWR Way 3 Quality Assured 4 Grade Selection - AISI 304 or AISI 306,
Satin or Mirror Polished?4 Glass
6 MODULAR SYSTEM
7 Satin Components 18 Glass Clamp Infill 21 Rod Infill 23 Wire Rope Infill27 NEW Mirror Polished Components
31 NEW GLASS CHANNEL SYSTEM
32 Overview 32 Channel Components35 Satin Handrail Components37 Mirror Polished Handrail Components
40 STAND OFF BRACKETS
40 Overview
41 TIMBER HANDRAIL
41 Overview 41 Components
43 FIXINGS
43 Overview 44 Components
47 TOOLS & ACCESSORIES
47 Components
50 HELP & ADVICE
50 Loading & Building Regulations 50 Cutting, Drilling & Polishing 51 Cleaning & Maintenance 51 Online Quote Configurator52 Fitting Instructions56 Also Available from SWR
23
31
40
43
At SWR we are committed to providing high levels of customer service, whilst constantly looking at ways in which we can improve your experience in dealing with us. We have a dedicated team on hand to guide you in your selection of the most suitable balustrade system for your project. Designing and installing your balustrade system is easier than you may think. Simply send us your sketches, photographs or technical drawings and we will help you turn your vision into a reality.Our aim is to provide you with a premium quality, safe and reliable system. We will guide and advise you based on the industry standards and building regulations to ensure complete peace of mind in your selection.
SERVICE THE SWR WAY
QUALITY ASSURED
As an ISO 9001:2008 approved company, quality is at the forefront in all that we do. We have worked to ensure our balustrade systems are designed and manufactured to comply with industry standards and regulations. Our systems have been rigorously tested by The British Standards Institute to BS 6180. To download these test reports and for further technical information please visit us at: www.swr-balustrade.co.uk/knowledge or contact our Sales Team.
Customer Care Excellence Award Winners
SWR Limited, 3-4 Eastman Way, Hemel Hempstead, Hertfordshire, HP2 7DUOffice Hours: Monday - Friday, 8.30am - 5.00pm
www.swr-balustrade.co.uk [email protected]
TEL: 01442 359878 FAX: 01442 259918
CONTACT US
3
ISO 9001Registere d
QualityManagement 015
[email protected] 359878
GRADE SELECTION – AISI 304 OR AISI 316, SATIN OR MIRROR POLISHED?
4
SWR BALUSTRADE
Our balustrade range comprises of AISI 304 and AISI 316 stainless steel, both of which are available in a 320 grit brushed satin finish or a mirror polished finish.
AISI 304 and 316 stainless steel appear the same but perform very differently depending on the surrounding environment. This is due to the differences in the chemical composition between the two grades with AISI 316 offering more resistance to corrosion due to the molybdenum content.
In line with industry guidelines, as a general rule we recommend AISI 316 for outdoor use and AISI 304 for interior projects.
Although satin and mirror polished contain the same chemical composition, they appear very different due to the final surface finish. The mirror finish is polished down to approximately 0.2 microns, which produces a very smooth and reflective surface, making it the most suitable finish for coastal and busy industrial areas containing high emissions. Unlike the satin finish, which is polished down to approximately 0.5 microns, mirror polished provides minimal areas for corrosive elements in the air to rest, which potentially cause permanent damage to your system.
The table below can be used as a rough guide to which grade/finish is appropriate for certain environments.
For more information, please visit: www.swr-balustrade.co.uk/knowledge or contact our Sales Team.
Rural Urban Industrial Coastal Internal External Internal External Internal External Internal ExternalSatin 304 Satin 316 Mirror 304 Mirror 316
GLASS
SWR’s approach to safety is paramount, which equally extends to our choice of glass as an infill solution for your balustrade system. All glass supplied by SWR is manufactured in accordance with BS EN 12600:2002 and our dedicated team work closely with you to determine the best glass option based on the load information provided.
We recognise that clients need a “one stop” solution when it comes to purchasing a glass infill balustrade and so SWR has established a partnership with a top glass processor who has been supplying safety glass since 1985 and is a leading supplier of quality architectural glass products throughout the UK.
Whether your requirement is for a domestic glass balustrade for your patio, balcony or a large commercial development, we can supply toughened or toughened & laminated glass to suit your needs.
Choosing The Right Glass
When you contact SWR with your glass enquiry, our experienced and helpful team will determine the right glass for you. We will ask some key questions about your requirements which will enable us to discuss the various options with you:
• What height of glass do you require?
• Is your system internal or external?
• Is a stainless steel handrail required?
• What loading does the glass balustrade need to achieve? This can be provided by a structural engineer or your local building control officer.
www.swr-balustrade.co.uk
GLASS
SWR BALUSTRADE
Once we have established this information, we can discuss the thickness of glass required and whether this will be provided as toughened, heat soaked glass or toughened & laminated glass. Toughened glass is ideally suited to most applications where safety is critical, but consideration should be taken if the glass balustrade is at a high level.
Toughened & laminated glass is constructed of two pieces of toughened glass either side of a laminate interlayer and offers the same strength under impact as toughened glass with a crucial safety difference - If the pane is damaged resulting in the glass breaking, the fragments will be retained by the laminate interlayer, enabling the system to still act as a barrier until a replacement can be installed.
Your glass balustrade system will not only need to look great, it will also be designed to be a key safety feature in your environment. As safety is paramount to SWR, we can call upon the services of an industry recognised Structural Glass Consultancy who, from the information provided to them, can determine precisely what type of glass is required to achieve the strength it is intended for. For your piece of mind, they can provide a written report detailing the calculations used to determine this.
Delivery To Your Door
SWR can arrange to have your glass delivered to the majority of locations on the UK mainland. By using a dedicated courier for your glass, we can ensure your order arrives quickly and in perfect condition.
All glass delivered to you will have polished edges and radius corners as standard unless requested otherwise. We can also supply frosted/sandblasted glass, silkscreen printed glass and etched glass.
For more information, please visit: www.swr-balustrade.co.uk/knowledge or contact our Sales Team.
5
[email protected] 359878
MODULAR SYSTEMOur most popular system - strong, stunning and versatile
SWR BALUSTRADE
6
www.swr-balustrade.co.uk 7
MODULAR SYSTEMSATIN TUBE
SWR’s stainless steel post and handrail system is designed to provide a user friendly solution for the most bespoke balustrade requirements. The stylish modular system is available in a variety of contemporary infill solutions including glass, wire or rod; giving you complete freedom of design.
Our satin product range includes both AISI 304 and AISI 316 grade stainless steel in 42.4mm and 48.3mm diameter tube. Whether you require a balustrade system for a residential or commercial project, we at SWR can offer a cost effective solution designed to meet your specific needs.
Tube
Ø T H Grade Part Code 42.4 2.0 Up to 6m AISI 304 4220.11.910 42.4 2.0 Up to 6m AISI 316 6220.11.910 48.3 2.0 Up to 6m AISI 304 4826.11.910 48.3 2.0 Up to 6m AISI 316 6826.11.910
H
[email protected] 3598788
MODULAR SYSTEMSATIN BASE & WALL FIXINGS
Base Plate
For Tube H D Ø Grade Part Code 42.4 67 120 38.3 AISI 304 4220.12.010 42.4 67 120 38.3 AISI 316 6220.12.010
Base Plate Cover
For Tube H D Ø Grade Part Code 42.4 18 125 42.5 AISI 304 4200.12.019 42.4 18 125 42.5 AISI 316 6200.12.019
Base Plate & Floor Post (1050mm)
For Tube H D Grade Part Code 42.4 1050 120 AISI 304 4220.12.011 42.4 1050 120 AISI 316 6220.12.011
www.swr-balustrade.co.uk 9All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN BASE & WALL FIXINGS
Wall Plate
For Tube H D Ø Grade Part Code 42.4 48 79 38.3 AISI 304 4220.12.020 42.4 48 79 38.3 AISI 316 6220.12.020 48.3 68 79 43 AISI 304 4826.12.020 48.3 68 79 43 AISI 316 6826.12.020
Articulated Wall Plate
For Tube H D Ø Grade Part Code 42.4 65 80 38.3 AISI 304 4220.12.021 42.4 65 80 38.3 AISI 316 6220.12.021
Wall Plate Cover
For Tube H D Ø Grade Part Code 42.4 16 84 42.5 AISI 304 4200.12.029 42.4 16 84 42.5 AISI 316 6200.12.029
Heavy Duty Base Plate
For Tube H D Ø Grade Part Code 42.4 100 100 38.3 AISI 304 4220.12.030 42.4 100 100 38.3 AISI 316 6220.12.030 48.3 117 100 43 AISI 304 4826.12.030 48.3 117 100 43 AISI 316 6826.12.030
Heavy Duty Base Plate Cover
For Tube H D Ø Grade Part Code 48.3 17 105 48.4 AISI 304 4800.12.039 48.3 17 105 48.4 AISI 316 6800.12.039
[email protected] 35987810
Small Wall Plate
For Tube H D Grade Part Code 42.4 5 42.4 AISI 304 4220.12.022 42.4 5 42.4 AISI 316 6220.12.022
8.5
D
2
350
Breast Work Section
For Tube Ø D Grade Part Code 42.4 25.4 80 AISI 304 4220.21.030 42.4 25.4 80 AISI 316 6220.21.030
SATIN BASE & WALL FIXINGS
Short 90° Base Plate
For Tube H D Ø Grade Part Code 42.4 51.2 76 42.4 AISI 304 4220.12.090 42.4 51.2 76 42.4 AISI 316 6220.12.090
Long 90° Base Plate
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4220.12.100 42.4 42.4 AISI 316 6220.12.100
78
107.4
65
Support Flange
For Tube H D Ø Grade Part Code 42.4 30 76 42.4 AISI 304 4220.12.110 42.4 30 76 42.4 AISI 316 6220.12.110
MODULAR SYSTEM
www.swr-balustrade.co.uk 11All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN BASE & WALL FIXINGS
Flush Ground Post Holder
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4220.12.107 42.4 42.5 AISI 316 6220.12.107
1114
110
47.3
45 45
Hinged Post Holder
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4220.12.555 42.4 42.5 AISI 316 6220.12.555 48.3 48.4 AISI 304 4826.12.555 48.3 48.4 AISI 316 6826.12.555
Round Post Holder
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4220.12.551 42.4 42.5 AISI 316 6220.12.551 48.3 48.4 AISI 304 4826.12.551 48.3 48.4 AISI 316 6826.12.551
Two Part Post Holder
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4220.12.103 42.4 42.5 AISI 316 6220.12.103
50
40
94
-2.1
89
1595
Post Holder
For Tube H Ø Grade Part Code 42.4 27 38.3 AISI 304 4220.12.101 42.4 27 38.3 AISI 316 6220.12.101 48.3 30 43 AISI 304 4826.12.101 48.3 30 43 AISI 316 6826.12.101
[email protected] 35987812
MODULAR SYSTEMSATIN BENDS, ELBOWS & TEES
90° Curved Elbow M/F (with Plug)
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4220.15.166 42.4 42.4 AISI 316 6220.15.1664-2.1
-2.17
-2.1
45° Elbow
For Tube H Ø Grade Part Code 42.4 42.4 42.4 AISI 304 4220.15.175 42.4 42.4 42.4 AISI 316 6220.15.175
90° Sharp Elbow
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4220.15.170 42.4 30 42.4 AISI 316 6220.15.170 48.3 35 48.3 AISI 304 4826.15.170 48.3 35 48.3 AISI 316 6826.15.170
90° Curved Elbow
For Tube H Ø Grade Part Code 42.4 31.3 42.4 AISI 304 4220.15.160 42.4 31.3 42.4 AISI 316 6220.15.160 48.3 35 48.3 AISI 304 4826.15.160 48.3 35 48.3 AISI 316 6826.15.160
90° Curved Elbow M/F (with Cap)
For Tube H Ø Grade Part Code 42.4 83 42.4 AISI 304 4220.15.165 42.4 83 42.4 AISI 316 6220.15.165 48.3 84 48.3 AISI 304 4826.15.165 48.3 84 48.3 AISI 316 6826.15.165
www.swr-balustrade.co.uk 13All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN BENDS, ELBOWS & TEES
Articulated Elbow
For Tube H Ø Grade Part Code 42.4 27 42.4 AISI 304 4220.15.250 42.4 27 42.4 AISI 316 6220.15.250 48.3 30 48.3 AISI 304 4826.15.250 48.3 30 48.3 AISI 316 6826.15.250
HThree Way Articulated Joint
For Tube H Ø Grade Part Code 42.4 104 42.4 AISI 304 4220.15.251 42.4 104 42.4 AISI 316 6220.15.251 48.3 112 48.3 AISI 304 4826.15.251 48.3 112 48.3 AISI 316 6826.15.251
Three Way Elbow
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4220.15.190 42.4 30 42.4 AISI 316 6220.15.190 48.3 35 48.3 AISI 304 4826.15.190 48.3 35 48.3 AISI 316 6826.15.190
Equal T
For Tube H Ø Grade Part Code 42.4 60 42.4 AISI 304 4220.15.210 42.4 60 42.4 AISI 316 6220.15.210 48.3 70 48.3 AISI 304 4826.15.210 48.3 70 48.3 AISI 316 6826.15.210
Straight Connector
For Tube H Ø Grade Part Code 42.4 6 42.4 AISI 304 4220.15.280 42.4 6 42.4 AISI 316 6220.15.280 48.3 6 48.3 AISI 304 4826.15.280 48.3 6 48.3 AISI 316 6826.15.280
[email protected] 35987814
MODULAR SYSTEMSATIN END CAPS
Round Capping Plug (Stainless Steel)
For Tube H Ø Grade Part Code 42.4 21 42.4 AISI 304 4220.15.155 42.4 21 42.4 AISI 316 6220.15.155
Flat Capping Plug (Plastic Sleeve)
For Tube H Ø Grade Part Code 48.3 8 48.3 AISI 304 4826.15.140 48.3 8 48.3 AISI 316 6826.15.140
Flat Capping Plug (Stainless Steel)
For Tube H Ø Grade Part Code 42.4 2.5 42.4 AISI 304 4220.15.140 42.4 2.5 42.4 AISI 316 6220.15.140
Round Capping Plug (Plastic Sleeve)
For Tube H Ø Grade Part Code 42.4 15 42.4 AISI 304 4220.15.150 42.4 15 42.4 AISI 316 6220.15.150 48.3 15 48.3 AISI 304 4826.15.150 48.3 15 48.3 AISI 316 6826.15.150
www.swr-balustrade.co.uk 15All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN HANDRAIL BRACKETS
Wall Bracket with Ring Saddle
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4200.13.044 42.4 42.5 AISI 316 6200.13.044
7
80
54
20
13
50
24
5-63
85
Wall Bracket
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4200.43.042 42.4 42.4 AISI 316 6200.43.042
Wall Bracket (Requires Welding)
For Tube H L Grade Part Code All 50 75 AISI 304 4000.13.043 All 50 75 AISI 316 6000.13.043
For Tube H L Ø Grade Part Code 42.4 74 75 42.4 AISI 304 4200.13.040 42.4 74 75 42.4 AISI 316 6200.13.040
Wall Bracket
78
Articulated Wall Bracket
For Tube H L Ø Grade Part Code 42.4 63 66 42.4 AISI 304 4200.13.041 42.4 63 66 42.4 AISI 316 6200.13.041 48.3 63 66 48.3 AISI 304 4800.13.041 48.3 63 66 48.3 AISI 316 6800.13.041
[email protected] 35987816
MODULAR SYSTEMSATIN HANDRAIL BRACKETS
85
40-80
Bracket for Glass
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4200.16.045 42.4 42.4 AISI 316 6200.16.045
Wall Bracket Cover
For Tube H D Ø Grade Part Code 42.4 14 85 12 AISI 304 4200.13.049 42.4 14 85 12 AISI 316 6200.13.049
Suitable for 12-13mm glass
45
36
10
10 14
1619
15
820
14
Gate Latch
For Tube Grade Part Code 42.4 AISI 316 6200.21.520
Ball with Internal Thread
Ø Thread Grade Part Code 50 M6 AISI 304 4000.21.355
4536
1010 14
16
8
1915
8
11
3
Gate Hinge
For Tube Grade Part Code 42.4 AISI 316 6200.21.500
www.swr-balustrade.co.uk 17All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN HANDRAIL SUPPORTS
Articulated Tube Saddle
For Tube H Ø Grade Part Code 42.4 55 42.4 AISI 304 4220.14.240 42.4 55 42.4 AISI 316 6220.14.240
Stand Off Articulated Rail Support
For Tube H Ø Grade Part Code 42.4 78 42.4 AISI 304 4220.14.233 42.4 78 42.4 AISI 316 6220.14.233 48.3 79 48.3 AISI 304 4826.14.233 48.3 79 48.3 AISI 316 6826.14.233
For Tube D Ø Grade Part Code 42.4 42.4 42.4 AISI 304 4220.14.234 42.4 42.4 42.4 AISI 316 6220.14.234
Articulated Ring Saddle
H
Tube Saddle
For Tube H D Ø Grade Part Code 42.4 9 42.4 42.4 AISI 304 4220.14.230 42.4 9 42.4 42.4 AISI 316 6220.14.230 48.3 5 48.3 48.3 AISI 304 4826.14.230 48.3 5 48.3 48.3 AISI 316 6826.14.230
Articulated Post Bracket
For Tube H Ø Grade Part Code 42.4 40 42.4 AISI 304 4220.14.241 42.4 40 42.4 AISI 316 6220.14.241
[email protected] 35987818
GLASS CLAMP INFILLCreate a contemporary look without obscuring the view.
www.swr-balustrade.co.uk 19All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMSATIN GLASS CLAMP INFILL
46
Round Zamac Glass Bracket
For Tube Suit Glass T Ø Grade Part Code 42.4 6-8 42.4 Zamac Z200.17.272 42.4 8-10 42.4 Zamac Z200.17.271 42.4 10-12 42.4 Zamac Z200.17.273
46
Surface Suit Glass T Grade Part Code Flat 6-8 Zamac ZF00.17.272 Flat 8-10 Zamac ZF00.17.271 Flat 10-12 Zamac ZF00.17.273
Flat Zamac Glass Bracket
46
Surface Suit Glass T Grade Part Code Flat 6-8 AISI 316 6F00.16.260 Flat 8-10 AISI 316 6F00.16.261
Flat Glass Bracket
46
Round Glass Bracket
For Tube Suit Glass T Ø Grade Part Code 42.4 6-8 42.4 AISI 304 4200.16.260 42.4 6-8 42.4 AISI 316 6200.16.260 42.4 8-10 42.4 AISI 304 4200.16.261 42.4 8-10 42.4 AISI 316 6200.16.261 48.3 8-10 48.3 AISI 304 4800.16.261 48.3 8-10 48.3 AISI 316 6800.16.261 48.3 11.5 48.3 AISI 316 6800.16.115
[email protected] 3598782020
GLASS CLAMP INFILL
Vertical Glass Hanger
For Tube D Ø Grade Part Code 42.4 30 42.4 AISI 304 4200.16.262
MODULAR SYSTEM
www.swr-balustrade.co.uk
MODULAR SYSTEM
ROD INFILLA modern look with a sturdy, rigid finish.
21
[email protected] 35987822
ROD INFILL COMPONENTS
12mm Rod Holder
For Tube D Ø Grade Part Code 42.4 12.2 42.4 AISI 304 4200.20.311 42.4 12.2 42.4 AISI 316 6200.20.311 48.3 12.2 48.3 AISI 304 4800.20.311 48.3 12.2 48.3 AISI 316 6800.20.311
Rod
Ø Length Grade Part Code 12 Up to 3m AISI 304 4000.19.155 12 Up to 3m AISI 316 6000.19.155
MODULAR SYSTEM
www.swr-balustrade.co.uk 23
MODULAR SYSTEM
WIRE ROPE INFILLA minimal finish, fitting for all applications.
[email protected] 35987824
Wire Rope Post Tensioner
For Tube D Ø Grade Part Code 42.4 4 42.4 AISI 304 4200.23.471 42.4 4 42.4 AISI 316 6200.23.471 Timber 4 Flat AISI 304 4000.23.472 Timber 4 Flat AISI 316 6000.23.472
Wire Rope Tension Kit
For Tube Length Grade Part Code Universal 3 metres AISI 316 6000.23.003 Universal 5 metres AISI 316 6000.23.005 Universal 10 metres AISI 316 6000.23.010
WIRE INFILL COMPONENTS
Swage Fork Terminal (MT Form Stainless Steel)
Wire L1 L2 A D H Part Code 4 86 45 11 8 11 SSRFS0408M 6 128 64 14 12 20 SSRFS0612M
A
D
L1
L2
H
D
H
A
LG max length
L1
D1 D1 Wire L1 A D H LG Part Code M8 4 210 11 8 11 285 SSRFS0408M M12 6 300 14 12 20 410 SSRFS0612M
Rigging Screw (Jaw & Wire Rope Terminal MT Form Stainless Steel)
H
D1
L
B
D1 L B H WT (kg) Part Code M6 11 16 28.06 0.025 SSEB0006 M8 13 20 35.65 0.050 SSEB0008 M10 17 25 44.12 0.094 SSEB0010 M12 20.5 30 52.16 0.166 SSEB0012
Eye Bolt (DIN 580 Type Stainless Steel)
MODULAR SYSTEM
www.swr-balustrade.co.uk 25All dimensions are in millimetres unless otherwise stated.
H
D1
BEye Nut (DIN 582 Type Stainless Steel)
D1 B H WT (kg) Part Code M6 16 28.06 0.023 SSEN0006 M8 20 35.65 0.046 SSEN0008 M10 25 44.42 0.086 SSEN0010 M12 30 52.16 0.144 SSEN0012
D1
D
L
B
D1 L D B WLL (Tons) WT (kg) Part Code M6 40 5 15 0.05 0.027 SSLEB06040 M6 60 5 15 0.05 0.030 SSLEB06060 M6 80 5 15 0.05 0.035 SSLEB06080 M8 80 6 20 0.08 0.065 SSLEB08080 M8 100 6 20 0.08 0.072 SSLEB08100 M10 100 8 25 0.15 0.130 SSLEB10100 M12 120 10 30 0.22 0.230 SSLEB12120
Eye Bolt (Metric Thread Stainless Steel)
D1
D
L
B
D L B WLL (Tons) WT (kg) Part Code 5 50 11 0.05 0.017 SSLEB05050L 6 60 14 0.08 0.028 SSLEB06060L 8 80 18 0.15 0.065 SSLEB06080L 10 100 22 0.22 0.127 SSLEB10100L
Eye Bolt (Wood Thread Stainless Steel)
MODULAR SYSTEMWIRE INFILL COMPONENTS
[email protected] 35987826
WIRE INFILL COMPONENTS
Stainless Steel Wire Rope (1x19)
Diameter Approx. Mass Min. Breaking Load Part Code 4 7.81kg/100m 12.6 force kN SS119040 6 17.6kg/100m 28.2 force kN SS119060
Stainless Steel Wire Rope (7x7)
Diameter Approx. Mass Min. Breaking Load Part Code 4 6.05kg/100m 9.49 force kN SS770040 6 13.6kg/100m 21.4 force kN SS770060
MODULAR SYSTEM
www.swr-balustrade.co.uk 27All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEMNEW MIRROR POLISHED COMPONENTS
Wall Plate
For Tube H D Ø Grade Part Code 42.4 30 95 38.3 AISI 304 4220.12.020MR 42.4 30 95 38.3 AISI 316 6220.12.020MR 48.3 35 100 43 AISI 304 4826.12.020MR 48.3 35 100 43 AISI 316 6826.12.020MR
Base Plate Cover
For Tube D Ø Grade Part Code 42.4 110 38.3 AISI 304 4200.12.019MR 42.4 110 38.3 AISI 316 6200.12.019MR 48.3 120 43 AISI 304 4800.12.019MR 48.3 120 43 AISI 316 6800.12.019MR
27
Base Plate & Welded Floor Post
For Tube D Ø Grade Part Code 42.4 100 42.4 AISI 304 4220.12.011MR 42.4 100 42.4 AISI 316 6220.12.011MR 48.3 115 48.3 AISI 304 4826.12.011MR 48.3 115 48.3 AISI 316 6826.12.011MR
9
8
17
970
Tube
Ø T H Grade Part Code 42.4 2.0 Up to 5m AISI 304 4220.11.910MR 42.4 2.0 Up to 5m AISI 316 6220.11.910MR 48.3 2.6 Up to 5m AISI 304 4826.11.910MR 48.3 2.6 Up to 5m AISI 316 6826.11.910MR
H
SWR are proud to launch our new range of mirror polished modular system tube and components. Our stainless steel post and handrail system is designed to provide a user friendly solution for the most bespoke balustrade requirements.
Our mirror polished product range includes both AISI 304 and AISI 316 grade stainless steel in 42.4mm and 48.3mm diameter tube. Whether you require a balustrade system for a residential or commercial project, we at SWR can offer a cost effective solution designed to meet your specific needs.
[email protected] 35987828
NEW MIRROR POLISHED COMPONENTS
Post Holder
For Tube Ø Grade Part Code 42.4 42.5 AISI 304 4220.12.551MR 42.4 42.5 AISI 316 6220.12.551MR 48.3 48.4 AISI 304 4826.12.551MR 48.3 48.4 AISI 316 6826.12.551MR
75
50
Wall Bracket
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4200.13.040MR 42.4 42.4 AISI 316 6200.13.040MR 48.3 48.3 AISI 304 4826.13.040MR 48.3 48.3 AISI 316 6826.13.040MR
90° Curved Elbow
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4220.15.160MR 42.4 30 42.4 AISI 316 6220.15.160MR 48.3 35 48.3 AISI 304 4826.15.160MR 48.3 35 48.3 AISI 316 6826.15.160MR
Articulated Elbow
For Tube H Ø Grade Part Code 42.4 27 42.4 AISI 304 4220.15.250MR 42.4 27 42.4 AISI 316 6220.15.250MR 48.3 30 48.3 AISI 304 4826.15.250MR 48.3 30 48.3 AISI 316 6826.15.250MR
End Cap
For Tube H Ø Grade Part Code 42.4 9 42.4 AISI 304 4220.15.140MR 42.4 9 42.4 AISI 316 6220.15.140MR 48.3 10 48.3 AISI 304 4826.15.140MR 48.3 10 48.3 AISI 316 6826.15.140MR
MODULAR SYSTEM
www.swr-balustrade.co.uk 29All dimensions are in millimetres unless otherwise stated.
MODULAR SYSTEM
8.5
Tube Saddle
For Tube Ø D Grade Part Code 42.4 42.4 42.4 AISI 304 4220.14.230MR 42.4 42.4 42.4 AISI 316 6220.14.230MR 48.3 48.3 48.3 AISI 304 4826.14.230MR 48.3 48.3 48.3 AISI 316 6826.14.230MR
Articulated Glass Bracket Handrail Support
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4200.16.045MR 42.4 42.4 AISI 316 6200.16.045MR 48.3 48.3 AISI 304 4800.16.045MR 48.3 48.3 AISI 316 6800.16.045MR
82
30-80
H
Extended Saddle
For Tube H Ø D Grade Part Code 42.4 79 42.4 42.4 AISI 304 4220.14.231MR 42.4 79 42.4 42.4 AISI 316 6220.14.231MR 48.3 80 48.3 48.3 AISI 304 4826.14.231MR 48.3 80 48.3 48.3 AISI 316 6826.14.231MR
H
Articulated Extended Saddle
For Tube H Ø D Grade Part Code 42.4 79 42.4 42.4 AISI 304 4220.14.233MR 42.4 79 42.4 42.4 AISI 316 6220.14.233MR 48.3 80 48.3 48.3 AISI 304 4826.14.233MR 48.3 80 48.3 48.3 AISI 316 6826.14.233MR
H
9090° Extended Saddle
For Tube H Ø D Grade Part Code 42.4 79 42.4 42.4 AISI 304 4220.14.236MR 42.4 79 42.4 42.4 AISI 316 6220.14.236MR 48.3 80 48.3 48.3 AISI 304 4826.14.236MR 48.3 80 48.3 48.3 AISI 316 6826.14.236MR
NEW MIRROR POLISHED COMPONENTS
[email protected] 35987830
NEW MIRROR POLISHED COMPONENTS
MODULAR SYSTEM
45 Flat Glass Bracket
Surface Suit Glass T Grade Part Code Flat 6-8 AISI 304 4F00.16.260MR Flat 6-8 AISI 316 6F00.16.260MR Flat 8-10 AISI 304 4F00.16.261MR Flat 8-10 AISI 316 6F00.16.261MR
Tube Connector
For Tube H Ø Grade Part Code 42.4 6 42.4 AISI 304 4220.15.280MR 42.4 6 42.4 AISI 316 6220.15.280MR 48.3 6 48.3 AISI 304 4826.15.280MR 48.3 6 48.3 AISI 316 6826.15.280MR
45
Round Glass Bracket
For Tube Suit Glass T Ø Grade Part Code 42.4 6-8 42.4 AISI 304 4200.16.260MR 42.4 6-8 42.4 AISI 316 6200.16.260MR 42.4 8-10 42.4 AISI 304 4200.16.261MR 42.4 8-10 42.4 AISI 316 6200.16.261MR 48.3 8-10 48.3 AISI 304 4800.16.261MR 48.3 8-10 48.3 AISI 316 6800.16.261MR
www.swr-balustrade.co.uk
SWR BALUSTRADE
NEW GLASS CHANNEL SYSTEMOur seamless, fashionable, state of the art system is perfected
31
[email protected] 35987832
GLASS CHANNEL SYSTEMOVERVIEW
SWR now supply a new frameless glass channel balustrade system suitable for both internal and external use. The system consists of an aluminium channel allowing customers to choose between either a base mounted or side mounted application with an improved clamping method to ensure installation times are kept to a minimum and to guarantee your glass is fully stable.
The new clamping method also allows glass to be easily removed or adjusted once the system is installed, saving both time and money. The system is fully tested under the current building regulations of BS6180 and can achieve a maximum loading of 1.5kN.
We also provide a 3kN system, which is available on request. Whether the system is to be fixed in or around the home or within a busy commercial environment, SWR will advise you on the most suitable balustrade system for your project.
Various cladding methods are available to protect your channel and cover any visible clamps that may be on show. You also have the choice to include a satin finish or a mirror polished stainless steel slotted handrail to enhance your design and improve the system’s overall strength.
For further information on glass, installation guides, building regulations and our test results, please visit our website: www.swr-balustrade.co.uk/knowledge or contact our Sales Team.
COMPONENTS
111.5
7228
14
13
Aluminium Channel
Fixing Length To Suit Glass Part Code Floor Up to 3 metres 12 - 21.5 0000.31.400 Side Up to 3 metres 12 - 21.5 0000.31.401
Suitable for glass sized 12mm-21.5mm - please call for further details.
www.swr-balustrade.co.ukAll dimensions are in millimetres unless otherwise stated. 33
GLASS CHANNEL SYSTEMCHANNEL COMPONENTS
11
20.5
9.5
8
Aluminium Top Seal Strip
Length Part Code Up to 3 metres 6000.32.050
2m required with every 1m of Base Fixed Channel 1m required with every 1m of Side Fixed Channel
119
22.5
Aluminium Side Cladding
Length Part Code Up to 3 metres 6000.32.030
1m required with every 1m of Side Fixed Channel
62
72
20
Aluminium Bottom Cladding
Length Part Code Up to 3 metres 6000.32.040
Optional – 1m required with every 1m of Side Fixed Channel
20
120
1
182
72
Aluminium End Plate - Bottom Cladding
Position Part Code Left 6000.32.06L Right 6000.32.06R
Required with Bottom Cladding
72
120
1
Aluminium End Plate - Base Fixed
Part Code 6000.32.070
Used when fitting Top Seal only to Channel
[email protected] 35987834
CHANNEL COMPONENTS
GLASS CHANNEL SYSTEM
Clamping Wedges & Cover Seal
Suit Glass Quantity Part Code 12 Pack of 4 0000.33.312 15 Pack of 4 0000.33.315 17.5 Pack of 4 0000.33.317 19 Pack of 4 0000.33.319 21.5 Pack of 4 0000.33.321
Pack includes 4 Clamping Wedges and all necessary bolts with 2m of Rubber Gasket - everything required for 1m of channel
Aluminium Channel Connecting Dowels
Quantity Part Code Pack of 3 6000.33.080
Optional - 1 pack required per Channel connection
74
120
1
Aluminium End Plate - Side Fixed
Part Code 6000.32.074
Used when fitting Top Seal one side of the Channel and Side Cladding to the other
Stainless Steel 10mm Head Spanner Part Code 0000.90.300
Required to tighten Clamping Wedges
www.swr-balustrade.co.uk 35
SATIN HANDRAIL COMPONENTS
GLASS CHANNEL SYSTEM
90° Elbow (Horizontal)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 316 6215.45.180 48.3 35 48.3 AISI 316 6815.45.180
Slotted Tube
Length Ø T U Grade Part Code Up to 6m 42.4 24 24 AISI 304 4215.41.910 Up to 6m 42.4 24 24 AISI 316 6215.41.910 Up to 6m 48.3 30 27 AISI 304 4815.41.910 Up to 6m 48.3 30 27 AISI 316 6815.41.910
90° Elbow (Vertical)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 316 6215.45.170 48.3 35 48.3 AISI 316 6815.45.170
All dimensions are in millimetres unless otherwise stated.
Adjustable Slotted Elbow (25-55° Upward)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.190 42.4 30 42.4 AISI 316 6215.45.190 48.3 35 48.3 AISI 304 4815.45.190 48.3 35 48.3 AISI 316 6815.45.190
Straight Connector
For Tube H Ø Grade Part Code 42.4 6 42.4 AISI 304 4215.45.280 42.4 6 42.4 AISI 316 6215.45.280 48.3 6 48.3 AISI 316 6815.45.280
[email protected] 35987836
GLASS CHANNEL SYSTEMSATIN HANDRAIL COMPONENTS
Wall Mounted Bracket
For Tube H D Ø Grade Part Code 42.4 30 90 39.3 AISI 304 4215.42.020 42.4 30 90 39.3 AISI 316 6215.42.020 48.3 35 95 45.2 AISI 304 4815.42.020 48.3 35 95 45.2 AISI 316 6815.42.020
Adjustable Slotted Elbow (25-55° Downward)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.195 42.4 30 42.4 AISI 316 6215.45.195 48.3 35 48.3 AISI 304 4815.45.195 48.3 35 48.3 AISI 316 6815.45.195
4
End Cap
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4215.45.140 42.4 42.4 AISI 316 6215.45.140 48.3 48.3 AISI 304 4815.45.140 48.3 48.3 AISI 316 6815.45.140
Rubber Gasket
For Tube Length To Suit Glass Part Code 42.4 Up to 6m 8.0 - 10.76 0200.47.012 42.4 Up to 6m 12.0 - 16.76 0200.47.015 42.4 Up to 6m 16.76 - 18.0 0200.47.811 48.3 Up to 6m 8.0 - 13.0 0800.47.0813 48.3 Up to 6m 13.0 - 17.52 0800.47.015 48.3 Up to 6m 18.0 - 21.5 0800.47.019
Rubber Gasket for other sizes of glass are available.
www.swr-balustrade.co.uk 37All dimensions are in millimetres unless otherwise stated.
GLASS CHANNEL SYSTEMMIRROR POLISHED HANDRAIL COMPONENTS
90° Elbow (Vertical)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.170MR 42.4 30 42.4 AISI 316 6215.45.170MR 48.3 35 48.3 AISI 304 4815.45.170MR 48.3 35 48.3 AISI 316 6815.45.170MR
Adjustable Elbow (25-55° Upwards)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.120MR 42.4 30 42.4 AISI 316 6215.45.120MR 48.3 35 48.3 AISI 304 4815.45.120MR 48.3 35 48.3 AISI 316 6815.45.120MR
Slotted Tube
Length Ø T U Grade Part Code Up to 5m 42.4 24 24 AISI 304 4215.41.910MR Up to 5m 42.4 24 24 AISI 316 6215.41.910MR Up to 5m 48.3 30 27 AISI 304 4815.41.910MR Up to 5m 48.3 30 27 AISI 316 6815.41.910MR
Straight Connector
For Tube H Ø Grade Part Code 42.4 6 42.4 AISI 304 4215.45.280MR 42.4 6 42.4 AISI 316 6215.45.280MR 48.3 6 48.3 AISI 304 4815.45.280MR 48.3 6 48.3 AISI 316 6815.45.280MR
90° Elbow (Horizontal)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.180MR 42.4 30 42.4 AISI 316 6215.45.180MR 48.3 35 48.3 AISI 304 4815.45.180MR 48.3 35 48.3 AISI 316 6815.45.180MR
[email protected] 35987838
GLASS CHANNEL SYSTEMMIRROR POLISHED HANDRAIL COMPONENTS
Adjustable Elbow (25-55° Downwards)
For Tube H Ø Grade Part Code 42.4 30 42.4 AISI 304 4215.45.130MR 42.4 30 42.4 AISI 316 6215.45.130MR 48.3 35 48.3 AISI 304 4815.45.130MR 48.3 35 48.3 AISI 316 6815.45.130MR
Wall Mounted Bracket
For Tube H D Ø Grade Part Code 42.4 30 90 39.3 AISI 304 4215.42.020MR 42.4 30 90 39.3 AISI 316 6215.42.020MR 48.3 35 95 45.2 AISI 304 4815.42.020MR 48.3 35 95 45.2 AISI 316 6815.42.020MR
4
End Cap
For Tube Ø Grade Part Code 42.4 42.4 AISI 304 4215.45.140MR 42.4 42.4 AISI 316 6215.45.140MR 48.3 48.3 AISI 304 4815.45.140MR 48.3 48.3 AISI 316 6815.45.140MR
5
D
Rubber Gasket
For Tube Length D To Suit Glass Part Code 42.4 Up to 5m 24 8.0 - 11.0 0200.47.010MR 42.4 Up to 5m 24 11.5 - 14.5 0200.47.012MR 42.4 Up to 5m 24 15.0 - 17.0 0200.47.015MR 42.4 Up to 5m 24 17.5 - 19.0 0200.47.019MR 48.3 Up to 5m 27 12.0 - 14.5 0800.47.012MR 48.3 Up to 5m 27 15.0 - 17.5 0800.47.015MR 48.3 Up to 5m 27 18.0 - 19.5 0800.47.019MR 48.3 Up to 5m 27 20.0 - 21.5 0800.47.020MR
Rubber Gasket for other sizes of glass are available.
www.swr-balustrade.co.uk 39All dimensions are in millimetres unless otherwise stated.
GLASS CHANNEL SYSTEMMIRROR POLISHED HANDRAIL COMPONENTS
[email protected] 35987840
6S
G
6mm Countersunk Screws
M10-16
30
STAND OFF BRACKETSOVERVIEW
The Stand Off Brackets from SWR allow for the installation of a structural glass balustrade in almost any location.Whether you require a Juliet balcony or a glass balustrade for your staircase or terrace these brackets are the ideal solution. A stainless steel handrail can also be incorporated onto the glass if desired. We provide a variety of bracket sizes from 10mm to 100mm (S). Available in 40mm & 50mm diameter (Ø). The brackets can incorporate 8mm, 10mm, 12mm or 15mm thick glass (G). Other glass thicknesses can be integrated upon request.We supply brackets in a mirror or satin finish, available in both AISI 304 (internal) and AISI 316 (external) grade stainless steel.Brackets have a side drive hole in the boss for tightening and are supplied complete with soft parts. They require a 25mm diameter hole in the glass.
Mirror finishSatin finish
www.swr-balustrade.co.uk 41All dimensions are in millimetres unless otherwise stated.
TIMBER HANDRAILOVERVIEW
Oak Handrail
Ø Part Code 45 0000.71.0AO
Grade Part Code AISI 304 4000.75.260
Round End Cap
Flat End Cap
Grade Part Code AISI 304 4000.75.265
For an excellent alternative to a stainless steel handrail, SWR’s oak timber handrails are perfect for a natural feel and appearance.Our oak timber handrail is 45mm diameter and can be varnished to a colour of your choice.It is compatible with a range of our stainless steel components, giving a modern feel to your balustrade system.
COMPONENTS
[email protected] 35987842
TIMBER HANDRAIL
90° Curved Elbow
Grade Part Code AISI 304 4000.75.600
90° Sharp Elbow
Grade Part Code AISI 304 4000.75.601
Connector
Grade Part Code AISI 304 4000.75.603
Nylon Connector
Ø Material Part Code 39 Nylon 0000.75.600
T-Connector for Tube
Ø Grade Part Code 42.4 AISI 304 4000.75.602
COMPONENTS
www.swr-balustrade.co.uk 43
FIXINGSOVERVIEW
High quality AISI 316 / A4 stainless steel fixings available from SWRWhether you are fixing into solid concrete, brick or timber; SWR have the perfect solution.Our dedicated team will guide you through the fixings you require for each component and will advise on the most suitable fixing methods for your project.All of our fixings are high quality AISI 316 / A4 stainless steel and are available from stock.For further information, please visit: www.swr-balustrade.co.uk/fixings or contact our Sales Team.
Please note: SWR provide advice and guidance on fixing requirements. However, these are only suggestions and it is the responsibility of the installer to ensure the suitability of these fixings. All dimensions are in millimetres unless otherwise stated.
[email protected] 35987844
FIXINGSCOMPONENTS
Rawl Through Bolt
Size Length Quantity Part Code M8 95 Pack of 15 6000.91.260 M10 95 Pack of 15 6000.91.360 M12 100 Pack of 15 6000.91.460
Self Tapping Countersunk Screw
Gauge Ø Length Quantity Part Code 10 5 2” (50mm) Pack of 12 6000.91.031
Self Tapping Pan Head Screw
Gauge Ø Length Quantity Part Code 4 3 1¼” (30mm) Pack of 12 6000.91.032 10 5 2” (50mm) Pack of 12 6000.91.030
Socket Button Screw
Size Length Quantity Part Code M5 20 Packs of 10 6000.91.140
Socket Cap Screw
Size Length Quantity Part Code M8 20 Packs of 10 6000.91.250
www.swr-balustrade.co.uk 45All dimensions are in millimetres unless otherwise stated.
FIXINGSCOMPONENTS
Studding
Size Quantity Part Code M8 Per metre 6000.91.220 M10 Per metre 6000.91.320 M12 Per metre 6000.91.420
Round Washers
Size Quantity Part Code M8 Pack of 25 6000.91.280 M10 Pack of 25 6000.91.380 M12 Pack of 25 6000.91.480
Dome Nuts
Size Quantity Part Code M8 Pack of 10 6000.91.271 M10 Pack of 10 6000.91.371 M12 Pack of 10 6000.91.471
Coach Screw
Size Length Quantity Part Code M8 100 Packs of 12 6000.91.210 M8 120 Packs of 12 6000.91.211 M10 100 Packs of 12 6000.91.310 M10 120 Packs of 12 6000.91.311 M12 100 Packs of 12 6000.91.410 M12 120 Packs of 12 6000.91.411
[email protected] 35987846
FIXINGSCOMPONENTS
Hex Nuts
Size Quantity Part Code M8 Pack of 10 6000.91.270 M10 Pack of 10 6000.91.370 M12 Pack of 10 6000.91.470
Polyester Resin
Size Quantity Part Code 410ml Per bottle 0000.62.020
Mixer Nozzles
Size Quantity Part Code For use with all cartridges Pack of 10 0000.90.002
Structural Adhesive
Size Quantity Part Code 25ml Per syringe 0000.61.637
Rawl Plugs
Size Quantity Part Code 7mm Box of 100 0000.90.011
www.swr-balustrade.co.uk 3547
TOOLS & ACCESSORIESCOMPONENTS
Tapping Wrench Part Code 0000.90.285
Drill Bits
Ø Part Code 3.2 0000.90.032 4.1 0000.90.041 5.0 0000.90.050 6.5 0000.90.065 6.8 0000.90.068
Tappers
Size Part Code M3 0000.90.003 M4 0000.90.004 M5 0000.90.005 M6 0000.90.006 M8 0000.90.008
All dimensions are in millimetres unless otherwise stated.
Chemical Injection Tool
Size Part Code Fits 380-410ml cartridge 0000.90.090
Stainless Steel 10mm Head Spanner Part Code 0000.90.300
Required to tighten Clamping Wedges
[email protected] 35987848
TOOLS & ACCESSORIESCOMPONENTS
Gauze Tape
Description Size Part Code White Crossweave 50mm x 50m 0000.90.012
Wire Rope Cutters Part Code: SWR0060
Type of Wire/Material Max. Cutting Capacities 1770 - 1960 Grade Wire Rope 4mm
Allen Key
Size Part Code 3mm 0000.90.009 6mm 0000.90.001
SWR Easy Clean
Description Size Part Code Interior Cleaner 750ml 0000.60.015
SWR Metal Shine
Description Size Part Code Exterior Cleaner 750ml 0000.60.020
www.swr-balustrade.co.uk 49All dimensions are in millimetres unless otherwise stated.
TOOLS & ACCESSORIESCOMPONENTS
• VDE No-volt switch • 6 speed bench drill complete
with 16mm capacity suitable for the automotive and maintenance workshop.
• Powered by 375W motor offering a highly efficient, smooth running operation. It has an adjustable circular tilting table complete with a rise and fall rack and pinion.
• Fitted with a BS approved non re-wireable 3 pin moulded plug and cable.
Bench Drill Part Code: GD16/16C
230v 16 speed 16mm capacity bench mounted pillar drillDrilling capacity 16mmChuck capacity 16mmCollar diameter 55mmSpindle taper MT2Speeds (rpm) 16 (190-2685)Swing 335mmSpindle travel 80mmColumn diameter 73mmTable diameter 290mmThroat depth 140mmBase size 435 x 260mmMotor 375WHeight 970mmWeight 57kg
• Three accurately ground mounting surfaces for drilling holes at 90°.
• Precision ground jaws.
Press Vice Part Code: DPV100/3
100mm 3 Way Drill Press Vice Capacity 85mmWidth 100mm
• A versatile three-speed machine offering horizontal and vertical cutting capabilities.
• The 350W motor gives smooth and accurate saw blade transmission through the adjustable ball bearing guides.
• Supplied complete with transport wheels, tool shelf, plastic blade guards and BS safety regulation guard.
Cutting Saw Part Code: MBS46A
230v Horizontal & Vertical Metal Cutting BandsawCutting capacity 114mm round/100x150mm rectangularMotor 350W inductionBlade length 1638mmVertical table size 254 x 250mmHeight to bed 591mmHeight to table 851mmSpeeds (rpm) 3 (65, 95, 165)Weight 61kg
[email protected] 359878
HELP & ADVICE
With any project the importance of safety has to be at the forefront of our minds when considering the most suitable balustrade system. With this mentality we work closely with our clients, providing advice on loading and dimensional specifications in line with The Building Regulations K2 Document. Our systems have been rigorously tested to BS 6180 and have been fully approved for residential and commercial projects.For more information, please go to: www.swr-balustrade.co.uk/regs
LOADING & BUILDING REGULATIONS
50
CUTTING, DRILLING & FINISHING SERVICE
SWR offer a full cutting, drilling and finishing service. Our CAD technicians provide our engineers with technical drawings of your system, designed to your specifications. Our highly skilled engineers then cut, drill and tap the balustrade accordingly.During production of your system we take care to polish each tube giving it a smooth clean finish ready for on site assembly.In line with our ISO 9001:2008 procedures we carry out rigorous checks throughout the production process to ensure ease of use and simple assembly when on site.For your convenience on site we work to package each part so that all are marked up clearly and can be easily identified when unpacking and preparing to start the job. It’s the small details that make the difference and ultimately help you to safely and efficiently install your balustrade system.
www.swr-balustrade.co.uk
HELP & ADVICE
51
SWR also provide a Online Quote Configurator so that you can customise your balsutrade system. Simply select the product type that you are interested in, followed by the estimated length of the system and the number of bends/corners, and we’ll get back to you with a quote. This process is fast and easy to use.Visit: www.swr-balustrade.co.uk/quote
ONLINE QUOTE CONFIGURATOR
An important thing to remember with stainless steel is that it is stain ‘less’ and not stain ‘free’. Stainless steel is not completely corrosion proof and does require on-going cleaning and maintenance. As members of the British Stainless Steel Association we advise all of our customers to carry out necessary maintenance on your system to help retain the modern finish of the product. We supply our own interior and exterior cleaning products specifically designed for stainless steel. Our cleaners give a sparkling appearance leaving a protective film to aid in future maintenance.
CLEANING & MAINTENANCE
SWR Easy Clean
Description Size Part Code Interior Cleaner 750ml 0000.60.015
SWR Metal Shine
Description Size Part Code Exterior Cleaner 750ml 0000.60.020
[email protected] 35987852
FITTING INSTRUCTIONSMODULAR SYSTEM
Upright Posts
Step 1Place your base plate down onto the surface you will be fixing to, ensuring that the full plate sits flush and there are no obstacles between the surface and the bottom of the base plate. Once in position, mark out the holes onto the surface using the pre-drilled holes in the base plate. Continue this process for each base plate you intend on fixing to the surface. 1)
Step 2Once you have marked out the holes for each base plate and are happy with their positions, you now need to drill them. 2)
ChemFix & Studding MethodThe size of the studding you have purchased will determine the size of the hole you need to drill. A hole one size up from the studding thickness is required.i.e. If you have purchased M8 studding, you will require an M10 hole.
If you have purchased an M10 studding, you will require an M12 hole etc.Continue to drill out the holes using the correct size drill bit. We advise customers to drill at least 100mm straight down into the surface they are fixing to. Once all holes are drilled they need to be cleaned of any excess debris that may remain inside the hole. The next step is to calculate the length of each stud you require to fit into the hole. This can be calculated by taking the distance drilled into the ground plus 15mm. 3)i.e. You have a hole that is 120mm into the ground: 120mm + 15mm = 135mm.
This means each piece of your studding will need to be cut to 135mm. You will require one piece of studding per hole drilled, cut to your calculated size. Next, take your ChemFix and slowly apply into each hole. 4) The ChemFix sets quickly so once you have applied it to the first 9-12 holes, place down the applicator gun and begin to twist your studding into each hole you have applied ChemFix into. You may find that on twisting the studding into the hole, you have a small amount of excess leaving the hole as the studding reaches the bottom. Please be sure to remove the excess as it can become difficult to remove at a later stage once it has set. Repeat this procedure until all holes are filled with studding and then leave to set for 60 minutes. You will need to change applicator nozzles as the ChemFix will set inside fairly quickly. Once complete, place your base plates back over the exposed studding. Lastly, place your washers, followed by your nuts onto each piece of the studding. Tighten up each nut so that the base plate is securely fixed to the surface. To finish up, place your base plate covers over the base plates to cover all exposed fixings. 5)
Step 3Take your upright posts and apply the necessary amount of MMA Adhesive to the male fitting exposed from your base plate. PLEASE NOTE: The MMA Adhesive sets very quickly. Proceed to place all upright posts over the exposed male fittings of the base plates. 6)For further help fitting your Balustrade System, please contact our Sales Team.
1)
2)
4)
5)
6)
15mm
120mm
3)
www.swr-balustrade.co.uk 53
FITTING INSTRUCTIONSMODULAR SYSTEM
HandrailStep 1 - Dry RunOnce you have all upright posts firmly fixed to your surface and you are happy with the strength of each, proceed to place your handrail supports into the top of each upright. 1) Place any elbows you may have into the ends of your handrails and down onto your fixed uprights. 2)PLEASE NOTE: DO NOT use any MMA Adhesive at this time.
Step 2Tape the handrail supports to the handrail using gauze tape. Remove the handrail completely from the uprights ensuring the supports are securely taped in the exact position they were when the handrail was in place. 3)
Step 3Using a felt pen, mark the holes on the handrail where your handrail support is positioned. Once all holes are marked and you are happy with their positions, un-tape the handrail supports.
Step 4Ensuring your handrail is securely positioned within a vice or similar mechanism, place a small piece of gauze tape over the marked area and using a sharp point, gently mark a pilot hole into your handrail - this will assist you in drilling your hole. Place lubricant onto your drill bit and proceed to drill the holes into your handrail. The correct size drill bit and tapper is included in your order. 4)PLEASE NOTE: Take it slow when drilling holes into your handrail.Once you have successfully drilled all holes into your handrail, you now need to tap them. The correct size tap is included in your order. To tap the hole, drill into it with the tapper. Remove all tape once all holes are drilled and tapped.PLEASE NOTE: SWR offer a full drilling and tapping service for upright posts,
however we do not drill and tap any handrails, to allow for any adjustments to be made on site.
Step 5Once all holes in your handrail(s) are drilled and tapped, proceed to replace your handrail supports, marrying up the holes in your handrail supports to the holes in your handrail. Place fixings through the underside of your handrail support and tighten until the handrail is securely fixed to handrail support. Repeat until all handrail supports are securely fixed to your handrail(s). 5)
Step 6Apply MMA Adhesive onto the male fitting of your handrail supports and the male fitting of any elbows on the end of your handrails. Proceed to place the handrail supports and elbows into your uprights. 6)PLEASE NOTE: The MMA Adhesive sets very quickly.
Step 7Using gauze tape, securely tape any areas that you have applied MMA Adhesive to act as extra support. Leave to set for 24 hours.
For further help fitting your Balustrade System, please contact our Sales Team.
2)
3)
4)
6)
1)
5)
[email protected] 35987854
FITTING INSTRUCTIONSMODULAR SYSTEM
GlassStep 1Once you have successfully installed your steel work, the last step is to install your glass infill. Remove your glass brackets from the packaging along with the correct sized rubbers. Every glass bracket includes both rubbers to accommodate 8mm and 10mm glass, a safety pin and an M8 x 20mm socket cap screw for you to fix the bracket to your upright. 1)PLEASE NOTE: The safety pin is only used when suspending glass at height.
The clamping brackets and rubbers are strong enough to successfully secure your glass in place.
Step 2Apply the correct size rubber into the inside of your bracket and fix the body of the bracket onto your upright. For your convenience, SWR pre-drill and tap these holes, however should you need to drill and tap on site, please refer to the SWR’s Handrail Fitting Instructions. It is the customer’s decision which side the brackets face. Tighten the screw through the body of the glass bracket into your upright using a 6mm allen key. 2)
Step 3The glass panel sizes are decided by the customer. Once all brackets are securely fixed to your uprights you will need to calculate the size of your glass. SWR recommend that to comply with current building regulations, once a glass panel is securely fixed in between the brackets, a sphere with a 100mm diameter should not be able to pass through any of the gaps. This includes the gaps between the upright posts and the glass, the handrail and the glass, and lastly, the surface you have fixed the balustrade onto and the glass.If you have fixed your balustrade onto a level surface, your glass panels will be rectangle. To calculate the “width” of your glass, take the measurement between the area within the glass bracket where your glass will rest, up to the same area on the opposing glass bracket, then minus 10mm off the total for some “play”. 3)i.e. Inside of glass bracket to inside of opposite glass bracket is 900mm.
(900mm - 10mm = 890mm) Glass Width: 890mmTo calculate the height of your glass, measure from the ground to the underside of your handrail and minus the size of the gap you wish to leave, ensuring that this is no more than 100mm. SWR would recommend a 70mm gap between the handrail and the glass, and the surface you have fixed to and the glass. 4)i.e. Measurement from surface area to underside of handrail is 1050mm.
(1050mm - 70mm - 70mm = 910mm) Glass Width: 910mmIf your glass panels are a “non-standard” shape, SWR advise that templates of the glass are made using a material that can be shaped into exactly how you wish your panel to look. This must be strong enough to be transported to us via courier and onto our glazier for processing. Our recommendation would be MDF wood. PLEASE NOTE: SWR are unable to supply any materials required to template glass.
We can offer to collect the templates from the customer at the customer’s expense.
Step 4On receipt of your glass, place into the glass brackets and tighten the glass clamp, ensuring the glass is securely clamped in all areas. 5)
Important Information – Please ReadSWR will do our very best to advise and guide on the most suitable and safest system for each individual project, however it remains the customer’s responsibility to ensure the final specification complies with current building regulations. We also advise and supply the relevant fixings to enable the installer to fix to certain materials, however it remains the installers responsibility to ensure that the area in which the system is to be fixed is structurally supportive and has been approved by a structural engineer.For further help fitting your Balustrade System, please contact our Sales Team.
1)
5)
2)
3)
4)
www.swr-balustrade.co.uk 55
FITTING INSTRUCTIONSGLASS CHANNEL SYSTEM
SWR also provide video instructions to assist you in installing your glass channel system, which can be found at: www.swr-balustrade.co.uk/glasschannelPlace your aluminium channel against the area you intend to fix to. Use this as a template to mark out the holes for drilling. Then remove the channel and begin to drill your holes.Your fixing method will determine the size of hole you will need to drill. Please see the guide below for fixing into concrete or brick. When fixing into other surfaces, please contact our Sales Team.PLEASE NOTE: If you are unsure on the quality of the structure you intend to fix to, please
seek the advice of a professional.Concrete & BrickWhen fixing to concrete or brick, SWR would advise the ChemFix and studding method. To achieve this you will require M12 threaded studding and M12 nuts and washers, which SWR supply at www.swr-balustrade.co.uk/fixings Proceed to drill your holes using a 14mm drill bit. This will allow enough space for the ChemFix and the M12 studding. You will need to cut your studding into equal lengths. The length of each piece will depend on how far into your substrate you intend to fix. PLEASE NOTE: SWR advise the minimum distance to fix into your substrate is 120mm,
however this distance can be assessed on site. Taking 120mm as an example, you will require an additional 15mm of studding to expose through the hole in your channel, providing you with enough exposed studding to tighten a nut and washer onto. 1)i.e. You have a hole that is 120mm into the ground: 120mm + 15mm = 135mm.
This means each piece of your studding will need to be cut to 135mm. Once you have all holes drilled and all necessary studding cut to the required lengths, you will then need to slowly apply your ChemFix into the holes. The ChemFix sets quickly so once you have applied it to the first 9-12 holes, place down the applicator gun and begin to twist your studding into each hole. You may find that on twisting the studding, you have a small amount of excess leaving the hole as it reaches the bottom. Please be sure to remove the excess as it can become difficult to remove at a later stage once it has set. Repeat this procedure until all holes are filled with studding and then leave to set for 60 minutes. You will need to change applicator nozzles as the ChemFix will set inside fairly quickly. 2)Once the ChemFix has set, proceed to place your channel back over the exposed pieces of studding and fix to the ground using your washers and nuts.The glass clamps need to be positioned on the bottom of the glass when inserting them into your channel. This requires you to lift the glass off the floor sufficiently to squeeze the clamps on or turn the glass upside down to attach them. Please see the recommended spacing of clamps for specified glass thicknesses below. All glass thicknesses have been tested under BSI6180 and documentation can be provided upon request. 3)19mm = 5 clamps per metre 15mm, 17.5mm & 21.5mm laminate = 4 clamps per metre 12mm = 3 clamps per metrePLEASE NOTE: If you have any queries regarding the position of these clamps, please refer to
our installation images or video.Once your glass panel is positioned in the channel with the clamps spaced accordingly you now need to place in your clamp bars. Each clamp will require two clamping bars, one either side of the glass. These are positioned so that the screw faces the wall of the channel. 4)When all of the clamping bars are positioned correctly, they need to be tightened. To tighten the clamps onto the glass, you need to turn the bolt on the clamping bar anti-clockwise, so that it begins to meet the channel wall. Whilst carrying out this procedure, please ensure the glass is flush using a spirit level. It is recommended that you tighten the clamps at either end of your glass panel before clamping the intermediates. 5)Once all of your glass is securely clamped within your channel and you are satisfied with the positioning, you need to clip on your aluminium cover seal. 6) Take your rubber gasket and feed into your aluminium strip using lubricant.PLEASE NOTE: Do not stretch the rubber gasket.Once the gasket has been fed into the cover strip, it can now be clipped onto your channel. Start from one end and make your way down. Clip any end caps and side/bottom cladding on to finish.SWR also provide video instructions to assist you in installing your glass channel system, which can be found at: www.swr-balustrade.co.uk/glasschannelFor further help fitting your Balustrade System, please contact our Sales Team.
4)
2)
5)
3)
6)
1)
120mm
15mm
[email protected] 359878
To request a brochure call: 01442 353005
Fully tested stainless steel wire rope and fittings for marine, architectural and structural applications.
STAINLESS STEEL WIRE ROPE & COMPONENTS
ALSO AVAILABLE FROM SWR
56
www.swr-balustrade.co.uk 57
1. GENERAL1.1 All sales contracts of SWR Ltd. (herein referred to as “the Seller”) shall be deemed to incorporate these conditions except in so far as these conditions are varied by any special conditions agreed in
writing between the parties. Any terms and conditions in the purchase order which are inconsistent with these conditions shall have no effect.2. CATALOGUES2. 1 Catalogues, price lists and any advertising matter published by the Seller are intended only to give an indication of the general nature of the goods available and nothing contained in any such catalogue,
list or other matter shall be or be deemed to be a representation by the Seller or a condition or warranty affecting any goods sold.3. PRICES3.1 Unless otherwise expressly stated all quotations shall be valid for a fixed period of 30 days only.3.2 Unless otherwise expressly agreed in writing the price payable for all goods supplied by the Seller shall be the price ruling at the date of despatch plus value added tax thereon at the rate ruling at the
date of despatch. All prices are subject to change.4. PAYMENT4.1 All goods shall be paid for in full by the Purchaser to the Seller at the time of ordering, by cash, cheque, credit card or finance.4.2 Where account facilities apply, having been expressly agreed in writing by the Seller, the price shall be paid in full by the Purchaser to the Seller within 30 days of the date of the invoice.4.3 For all installation products and services purchased a deposit (shown overleaf) is required. This is payable on order confirmation. The balance is payable after the products have been delivered. If the
seller is responsible for installation, this balance will be payable once the installation is complete, unless a finance agreement is in place.4.4 The Seller reserves the right to charge interest at a rate 5% above the Barclays Bank base rate from the date when the price falls due for payment until the date on which such payments are actually
received by the Seller, and in the case of any default in payment the Purchaser shall give the Seller every assistance in the repossession of the goods in respect of which payment has not been made.5.0 DOOR STEP SELLING - COOLING OFF PERIOD5.1 For orders signed away from the sellers normal premises (i.e. orders placed at your home, place of work or other third party premises) under the doorstep selling regulations act you are entitled to
a statutory 7 working days cooling off period - beginning from the date you place your order. Certain goods are exempt from this cooling off period, for example a special order or goods which are personalised or made to a personal specification
5.2 You must inform us in writing during the cooling off period that you are cancelling the order by sending the below notice of cancellation to SWR Ltd. See point 11 below.5.3 If you have not received the goods at the time of cancellation of the contract and we have not processed the goods for delivery, we will refund to you all the monies paid by you for the goods in question
in the same form of payment originally used for the purchase as soon as possible and in any event within 30 days of your cancellation being accepted.5.4 If applicable any related credit agreements will automatically be cancelled if the order is cancelled within the cooling off period mentioned in point. 5.5 If you do not return the goods to us we shall be entitled to deduct the direct costs of recovering the goods from the amount to be refunded to you.6. TRANSFER OF TITLE6.1 Title to goods shall only pass to the Purchaser from the date of payment in full of all sums payable to the Seller under the contract by which those goods were supplied or any other contract. Until such
time, goods remain the absolute property of the Seller and the Purchaser shall keep them insured to their full invoice value. Such goods shall be stored in such a way that they are readily identifiable and the Seller shall be entitled to repossess such goods at its entire discretion and at any time prior to payment in full therefore. The Purchaser hereby grants the Seller, its servants and agents a licence to enter upon the Purchaser’s premises for the purpose of repossessing the same. Such repossession shall not affect in any way the continued existence of any contract between the parties.
If goods in which title has not passed to the Purchaser are subjected to any process, addition or treatment, the property in the goods so processed, added to or treated, shall be vested in the Seller until title has passed.
6.2 All goods sold by the Purchaser to third parties before title has passed to the Purchaser, shall be sold as agent for the Seller and all proceeds received from such sales shall be held by the Purchaser in trust for the Seller, until payment in full of all amounts outstanding has been received by the Seller.
6.3 Notwithstanding that property in any goods has not passed to the Purchaser, the Seller shall be entitled to sue the Purchaser for the price of such goods if not paid on the due date.7. DELIVERY7.1 Any time for the delivery stated by the Seller will be an estimate only on the likely time required to effect delivery from the date of receipt by the Seller of full and final instructions.
The Seller will make every reasonable effort to comply with such estimate but the Purchaser shall have no right to damages or to cancel any contract with the Seller by reason only of failure on the part of the Seller to meet any stated delivery time.
7.2 The Seller will endeavour to comply with reasonable requests by the Purchaser for postponement of any stated delivery date but shall be under no enforceable obligation to do so. In the event of any such postponement at the request of the Purchaser, the Purchaser shall pay to the Seller on demand all costs and expenses thereby incurred including a reasonable charge for storage thereby occasioned.
7.3 When the goods are sold “carriage paid” by the Seller, delivery shall be deemed to take place at the moment the goods are lifted from the delivery vehicle and thereafter the goods shall be at the risk of the Purchaser in all respects.
8. DAMAGE IN TRANSIT8.1 No claim for goods damaged or lost in transit will be accepted by the Seller unless written notification of such damage or loss is given to the Seller by the Purchaser and the carrier within four working
days of receipt of the goods by the Purchaser and all damaged goods are retained by the Purchaser pending inspection by the Seller and carrier.9. LIABILITY9.1 In placing an order with the Seller subject to these conditions the Purchaser is deemed to acknowledge that the Purchaser is not dealing as a consumer and that the provisions of these conditions
restricting the liability of the Seller are (save as may be notified in writing by the Purchaser to the Seller before the time at which such order is accepted) fair and reasonable in the light of all circumstances then known to the Purchaser.
9.2 All goods supplied by the Seller are fit for the normal purpose for which such goods are intended. No liability is accepted if the goods are found not to be fit for any other purpose whether or not such other purpose was made known to the Seller before the contract was made. Any recommendations made by the Seller in such circumstances are made in good faith but as the conditions of use are outside the control of the Seller, it is for the Purchaser to satisfy himself as to the suitability of the goods. Save as aforesaid any conditions or warranty implied or imposed by law as to the quality fitness for the purpose or otherwise however of any goods supplied by the Seller is hereby expressly excluded and in no circumstances (except death or injury caused by the Seller’s negligence) shall the Seller be liable for any loss injury or damage caused or arising whether in contact or in tort save as expressly provided and to the extent provided in this condition.
9.3 If any defect in workmanship or materials shall manifest itself in any goods supplied by the Seller within 12 months of the date of delivery thereof provided always that the goods shall have been found not to be to specification the Seller shall have the right at its sole discretion to replace free of cost to the Purchaser (other than the cost of carriage) any such goods or parts thereof and the Purchaser shall be obliged to accept such replacement in full satisfaction of its claim and shall also return to the Seller at the expense of the Purchaser the goods originally delivered or such defective part thereof as may have been replaced. If the Seller shall fail to replace such goods or parts thereof any amount recoverable by way of damages from the Seller by the Purchaser shall be limited to the difference between the value of the goods at the time of the delivery to the Purchaser and no claim whatever by the Purchaser shall entitle the Purchaser to withhold payment of the price of any goods or to any right of set-off against any payment due to the Seller under any contract made by the Seller and the Purchaser, nor will any claim made by the Purchaser entitle the Purchaser to reject any goods supplied and treat the contract as repudiated and any remedy of the Purchaser shall be in damages only as hereinafter provided.
9.4 The Seller shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the Sellers instructions, whether oral or in writing, misuse or alterations of the Goods without the Seller’s approval.
9.5 Given the multitude of legislations, we cannot accept liability for the compliance of our products to local building regulations. We therefore would like to draw your attention to the fact that it is always the customer’s responsibility for observing the existing legal regulations and advice should be sort from your local planning office.
10. FORCE MAJEURE10.1 In the event of any act of God, outbreak of war either general or local, riot or other civil commotion, strike lock-out or act or decree of any government or any other matter or thing beyond reasonable
control of the Seller, the Seller:10.2 Shall not be liable for any injury or damage of any kind thereby caused or resulting therefrom; and10.3 May at the sole discretion of the Seller withdraw wholly or in part from the contract without any liability whatsoever. The construction validity and performance of this contract shall be governed by the
laws of England and all disputes which may arise under out of or in connection with or in relation to this contract shall be subject to the jurisdiction of the courts of England.
TERMS & CONDITIONS
SWR Ltd, 3-4 Eastman Way, Hemel Hempstead, Herts HP2 7DU
TEL: 01442 359878FAX: 01442 259918
www.swr-balustrade.co.uk [email protected] Version B14B.2