swisspump_scp
TRANSCRIPT
-
8/19/2019 swisspump_scp
1/16
SCP
Heating and CirculationPumps, 50Hz
-
8/19/2019 swisspump_scp
2/16
Approvals
Michael Drechsel
President of IQNet
Roland Glauser
Managing Director SQS
CERTIFICATE IQNet and SQS
hereby certify that the organisation
has implemented and maintains a
Management System
ISO 9001:2008
Issued on: 2012-02-20
Validity date: 2015-02-19
Registration Number: CH-32160
Whole Company
Swiss Pump Company AG3645 Thun-Gwatt
Switzerland
Design, development, manufacture and sale of products
for the transportation of liquids
IQNet Partners*:
-
8/19/2019 swisspump_scp
3/163
Contents
Application page 4
Design 4Material 4
Operating conditions 4
Definition of Model 5
Elictrical motor 5
SCP 3 - Speed Versions 6
SCP 1 - Speed Versions 10
Accessories 13
-
8/19/2019 swisspump_scp
4/16
G e n e r a l
D a t a
4
• SCP is Circulating pump research and developed by scientific research personnel of our company.
• SCP pump has following merits: no leackage, low noise, environmental protection, beautiful appearance,
convenient installation, run responsible and so on. It is designed special for heating system and it can be usedto supply water and add pressure for mansions of city, villa of suburb, house, to match with industrial equipment,
to supply water in cycle for cooling air-condition, boiler and solar energy, supply hot water and keep warm in cycle.
• Pump casing with suction and delivery connections with the same diameter and on the same axis(in-line).
• With fittings.
Application
• Clean liquid without abrasives which are non-aggressive to the pump material.
• Civilian and industrial heating systems.• Cooling and air-conditioning systems.
Heating and Circulation Pumps
Design
• Structure: The product is made up of pump and single-phase shield motor.
The pump is made up of impeller, body of pump,etc.
The motor consists of stator, rotor, shield cover anddeflating bolt.
• Seal: The pump isnt sealed with machinery sealing.
The stator and rotor of motor are sealed with stainless sreal cover.
Other parts are all sealed with heat-resisting rubber facing ring, so that theres no leakage.• Lubricate: Inside circulation way is adopted in the product.
The water between the stator and rotor can lubricate and cool the motor as the lubricate and coolant.
Material
• Pump body: Cast iron / Brass / Bronze
• Impeller: Plastic
• Shaft: Ceramic / Stainless Steel
• Bearings: Ceramic / CarbonUsually, the pump body material of SCP pump adopt cast iron but we can adopt the brass, bronze, or stainless steel
according to the costomers requirement.
When the transport medium is clean water which is in the normal temperature, suggest you use cast iron.
Operating conditions
• Liquid temperature: 2C to 110C
• Ambient temperature: up to 40C
• Max. working pressure: 10bar
Transmitted liquid shouldnt include solid impurity the volum of which ratio exceeds 0.1%.
-
8/19/2019 swisspump_scp
5/165
Electric Motor
2-Pole induction motor.
Enclosure class: IP 44
Insulation class: H
Standard voltage: 1 x 230V, 50Hz
3-Speed Example
Definition of Model
SCP 25 - 5 SB
Material
Rated head m
Nominal diameter mm
SCP Circulating pump
1-Speed Example
SCP 8 - 12.5 600
Power in W
Rated head m
Rated flow m3/h
SCP Circulating pump
-
8/19/2019 swisspump_scp
6/16
T e c h n i c a l
D a t a
6
SCP20/25/32-4
SCP20/25-4
-
8/19/2019 swisspump_scp
7/167
SCP20/25/32-4SB
SCP20/25/32-5
-
8/19/2019 swisspump_scp
8/16
T e c h n i c a l
D a t a
8
SCP25/32-8S
SCP20/25/32-6
-
8/19/2019 swisspump_scp
9/169
SCP40-8F
SCP20/25-12S
-
8/19/2019 swisspump_scp
10/16
T e c h n i c a l
D a t a
10
SCP15-12 • SCP25-12
SCP5-8-280F
-
8/19/2019 swisspump_scp
11/1611
SCP12.5-5-280F
SCP5-12.5-400
-
8/19/2019 swisspump_scp
12/16
-
8/19/2019 swisspump_scp
13/1613
Accessories
-
8/19/2019 swisspump_scp
14/16
-
8/19/2019 swisspump_scp
15/16
-
8/19/2019 swisspump_scp
16/16
Swiss Pump Company AG
Moosweg 36
CH - 3645 Thun - Gwatt
Switzerland
Tel. +41 33 223 11 00
Fax +41 33 223 11 22
www.swisspump.com